]>
Commit | Line | Data |
---|---|---|
1 | /** @file\r | |
2 | Support for USB 1.1 standard.\r | |
3 | \r | |
4 | Copyright (c) 2006 - 2007, Intel Corporation\r | |
5 | All rights reserved. This program and the accompanying materials\r | |
6 | are licensed and made available under the terms and conditions of the BSD License\r | |
7 | which accompanies this distribution. The full text of the license may be found at\r | |
8 | http://opensource.org/licenses/bsd-license.php\r | |
9 | \r | |
10 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
11 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
12 | \r | |
13 | **/\r | |
14 | \r | |
15 | #ifndef __USB_H__\r | |
16 | #define __USB_H__\r | |
17 | \r | |
18 | \r | |
19 | //\r | |
20 | // Definitions defined in UEFI spec\r | |
21 | //\r | |
22 | \r | |
23 | //\r | |
24 | // USB Transfer Results\r | |
25 | //\r | |
26 | #define EFI_USB_NOERROR 0x00\r | |
27 | #define EFI_USB_ERR_NOTEXECUTE 0x01\r | |
28 | #define EFI_USB_ERR_STALL 0x02\r | |
29 | #define EFI_USB_ERR_BUFFER 0x04\r | |
30 | #define EFI_USB_ERR_BABBLE 0x08\r | |
31 | #define EFI_USB_ERR_NAK 0x10\r | |
32 | #define EFI_USB_ERR_CRC 0x20\r | |
33 | #define EFI_USB_ERR_TIMEOUT 0x40\r | |
34 | #define EFI_USB_ERR_BITSTUFF 0x80\r | |
35 | #define EFI_USB_ERR_SYSTEM 0x100\r | |
36 | \r | |
37 | //\r | |
38 | // Constant value for Port Status & Port Change Status\r | |
39 | //\r | |
40 | #define USB_PORT_STAT_CONNECTION 0x0001\r | |
41 | #define USB_PORT_STAT_ENABLE 0x0002\r | |
42 | #define USB_PORT_STAT_SUSPEND 0x0004\r | |
43 | #define USB_PORT_STAT_OVERCURRENT 0x0008\r | |
44 | #define USB_PORT_STAT_RESET 0x0010\r | |
45 | #define USB_PORT_STAT_POWER 0x0100\r | |
46 | #define USB_PORT_STAT_LOW_SPEED 0x0200\r | |
47 | #define USB_PORT_STAT_HIGH_SPEED 0x0400\r | |
48 | #define USB_PORT_STAT_OWNER 0x0800\r | |
49 | \r | |
50 | #define USB_PORT_STAT_C_CONNECTION 0x0001\r | |
51 | #define USB_PORT_STAT_C_ENABLE 0x0002\r | |
52 | #define USB_PORT_STAT_C_SUSPEND 0x0004\r | |
53 | #define USB_PORT_STAT_C_OVERCURRENT 0x0008\r | |
54 | #define USB_PORT_STAT_C_RESET 0x0010\r | |
55 | \r | |
56 | //\r | |
57 | // USB data transfer direction\r | |
58 | //\r | |
59 | typedef enum {\r | |
60 | EfiUsbDataIn,\r | |
61 | EfiUsbDataOut,\r | |
62 | EfiUsbNoData\r | |
63 | } EFI_USB_DATA_DIRECTION;\r | |
64 | \r | |
65 | //\r | |
66 | // Usb port features\r | |
67 | //\r | |
68 | typedef enum {\r | |
69 | EfiUsbPortEnable = 1,\r | |
70 | EfiUsbPortSuspend = 2,\r | |
71 | EfiUsbPortReset = 4,\r | |
72 | EfiUsbPortPower = 8,\r | |
73 | EfiUsbPortOwner = 13,\r | |
74 | EfiUsbPortConnectChange = 16,\r | |
75 | EfiUsbPortEnableChange = 17,\r | |
76 | EfiUsbPortSuspendChange = 18,\r | |
77 | EfiUsbPortOverCurrentChange = 19,\r | |
78 | EfiUsbPortResetChange = 20\r | |
79 | } EFI_USB_PORT_FEATURE;\r | |
80 | \r | |
81 | \r | |
82 | //\r | |
83 | // USB standard descriptors and reqeust\r | |
84 | //\r | |
85 | #pragma pack(1)\r | |
86 | typedef struct {\r | |
87 | UINT8 RequestType;\r | |
88 | UINT8 Request;\r | |
89 | UINT16 Value;\r | |
90 | UINT16 Index;\r | |
91 | UINT16 Length;\r | |
92 | } EFI_USB_DEVICE_REQUEST;\r | |
93 | \r | |
94 | typedef struct {\r | |
95 | UINT8 Length;\r | |
96 | UINT8 DescriptorType;\r | |
97 | UINT16 BcdUSB;\r | |
98 | UINT8 DeviceClass;\r | |
99 | UINT8 DeviceSubClass;\r | |
100 | UINT8 DeviceProtocol;\r | |
101 | UINT8 MaxPacketSize0;\r | |
102 | UINT16 IdVendor;\r | |
103 | UINT16 IdProduct;\r | |
104 | UINT16 BcdDevice;\r | |
105 | UINT8 StrManufacturer;\r | |
106 | UINT8 StrProduct;\r | |
107 | UINT8 StrSerialNumber;\r | |
108 | UINT8 NumConfigurations;\r | |
109 | } EFI_USB_DEVICE_DESCRIPTOR;\r | |
110 | \r | |
111 | typedef struct {\r | |
112 | UINT8 Length;\r | |
113 | UINT8 DescriptorType;\r | |
114 | UINT16 TotalLength;\r | |
115 | UINT8 NumInterfaces;\r | |
116 | UINT8 ConfigurationValue;\r | |
117 | UINT8 Configuration;\r | |
118 | UINT8 Attributes;\r | |
119 | UINT8 MaxPower;\r | |
120 | } EFI_USB_CONFIG_DESCRIPTOR;\r | |
121 | \r | |
122 | typedef struct {\r | |
123 | UINT8 Length;\r | |
124 | UINT8 DescriptorType;\r | |
125 | UINT8 InterfaceNumber;\r | |
126 | UINT8 AlternateSetting;\r | |
127 | UINT8 NumEndpoints;\r | |
128 | UINT8 InterfaceClass;\r | |
129 | UINT8 InterfaceSubClass;\r | |
130 | UINT8 InterfaceProtocol;\r | |
131 | UINT8 Interface;\r | |
132 | } EFI_USB_INTERFACE_DESCRIPTOR;\r | |
133 | \r | |
134 | typedef struct {\r | |
135 | UINT8 Length;\r | |
136 | UINT8 DescriptorType;\r | |
137 | UINT8 EndpointAddress;\r | |
138 | UINT8 Attributes;\r | |
139 | UINT16 MaxPacketSize;\r | |
140 | UINT8 Interval;\r | |
141 | } EFI_USB_ENDPOINT_DESCRIPTOR;\r | |
142 | \r | |
143 | typedef struct {\r | |
144 | UINT8 Length;\r | |
145 | UINT8 DescriptorType;\r | |
146 | CHAR16 String[1];\r | |
147 | } EFI_USB_STRING_DESCRIPTOR;\r | |
148 | \r | |
149 | #pragma pack()\r | |
150 | \r | |
151 | typedef struct {\r | |
152 | UINT16 PortStatus;\r | |
153 | UINT16 PortChangeStatus;\r | |
154 | } EFI_USB_PORT_STATUS;\r | |
155 | \r | |
156 | \r | |
157 | //\r | |
158 | // Following are definitions not specified by UEFI spec.\r | |
159 | // Add new definitions below this line\r | |
160 | //\r | |
161 | enum {\r | |
162 | //\r | |
163 | // USB request type\r | |
164 | //\r | |
165 | USB_REQ_TYPE_STANDARD = (0x00 << 5),\r | |
166 | USB_REQ_TYPE_CLASS = (0x01 << 5),\r | |
167 | USB_REQ_TYPE_VENDOR = (0x02 << 5),\r | |
168 | \r | |
169 | //\r | |
170 | // Standard control transfer request type, or the value\r | |
171 | // to fill in EFI_USB_DEVICE_REQUEST.Request\r | |
172 | //\r | |
173 | USB_REQ_GET_STATUS = 0x00,\r | |
174 | USB_REQ_CLEAR_FEATURE = 0x01,\r | |
175 | USB_REQ_SET_FEATURE = 0x03,\r | |
176 | USB_REQ_SET_ADDRESS = 0x05,\r | |
177 | USB_REQ_GET_DESCRIPTOR = 0x06,\r | |
178 | USB_REQ_SET_DESCRIPTOR = 0x07,\r | |
179 | USB_REQ_GET_CONFIG = 0x08,\r | |
180 | USB_REQ_SET_CONFIG = 0x09,\r | |
181 | USB_REQ_GET_INTERFACE = 0x0A,\r | |
182 | USB_REQ_SET_INTERFACE = 0x0B,\r | |
183 | USB_REQ_SYNCH_FRAME = 0x0C,\r | |
184 | \r | |
185 | //\r | |
186 | // Usb control transfer target\r | |
187 | //\r | |
188 | USB_TARGET_DEVICE = 0,\r | |
189 | USB_TARGET_INTERFACE = 0x01,\r | |
190 | USB_TARGET_ENDPOINT = 0x02,\r | |
191 | USB_TARGET_OTHER = 0x03,\r | |
192 | \r | |
193 | //\r | |
194 | // USB Descriptor types\r | |
195 | //\r | |
196 | USB_DESC_TYPE_DEVICE = 0x01,\r | |
197 | USB_DESC_TYPE_CONFIG = 0x02,\r | |
198 | USB_DESC_TYPE_STRING = 0x03,\r | |
199 | USB_DESC_TYPE_INTERFACE = 0x04,\r | |
200 | USB_DESC_TYPE_ENDPOINT = 0x05,\r | |
201 | USB_DESC_TYPE_HID = 0x21,\r | |
202 | \r | |
203 | //\r | |
204 | // Features to be cleared by CLEAR_FEATURE requests\r | |
205 | //\r | |
206 | USB_FEATURE_ENDPOINT_HALT = 0,\r | |
207 | \r | |
208 | //\r | |
209 | // USB endpoint types: 00: control, 01: isochronous, 10: bulk, 11: interrupt\r | |
210 | //\r | |
211 | USB_ENDPOINT_CONTROL = 0x00,\r | |
212 | USB_ENDPOINT_ISO = 0x01,\r | |
213 | USB_ENDPOINT_BULK = 0x02,\r | |
214 | USB_ENDPOINT_INTERRUPT = 0x03,\r | |
215 | \r | |
216 | USB_ENDPOINT_TYPE_MASK = 0x03,\r | |
217 | USB_ENDPOINT_DIR_IN = 0x80,\r | |
218 | \r | |
219 | //\r | |
220 | //Use 200 ms to increase the error handling response time\r | |
221 | //\r | |
222 | EFI_USB_INTERRUPT_DELAY = 2000000,\r | |
223 | };\r | |
224 | #endif\r |