]>
Commit | Line | Data |
---|---|---|
1 | /** @file\r | |
2 | PCI Library.\r | |
3 | \r | |
4 | Copyright (c) 2006, Intel Corporation<BR>\r | |
5 | All rights reserved. This program and the accompanying materials\r | |
6 | are licensed and made available under the terms and conditions of the BSD License\r | |
7 | which accompanies this distribution. The full text of the license may be found at\r | |
8 | http://opensource.org/licenses/bsd-license.php\r | |
9 | \r | |
10 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
11 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
12 | \r | |
13 | Module Name: PciLib.c\r | |
14 | \r | |
15 | **/\r | |
16 | \r | |
17 | //\r | |
18 | // Declare I/O Ports used to perform PCI Confguration Cycles\r | |
19 | //\r | |
20 | #define PCI_CONFIGURATION_ADDRESS_PORT 0xCF8\r | |
21 | #define PCI_CONFIGURATION_DATA_PORT 0xCFC\r | |
22 | \r | |
23 | //\r | |
24 | // Declare macro to convert PCI Library formatted address to CF8 formatted address\r | |
25 | //\r | |
26 | // PCI Library formatted address CF8 Formatted Address\r | |
27 | // ============================= ======================\r | |
28 | // Bits 00..11 Register Bits 00..07 Register\r | |
29 | // Bits 12..14 Function Bits 08..10 Function\r | |
30 | // Bits 15..19 Device Bits 11..15 Device\r | |
31 | // Bits 20..27 Bus Bits 16..23 Bus\r | |
32 | // Bits 28..31 Reserved(MBZ) Bits 24..30 Reserved(MBZ)\r | |
33 | // Bits 31..31 Must be 1\r | |
34 | //\r | |
35 | \r | |
36 | /**\r | |
37 | Assert the validity of a PCI address. A valid PCI address should contain 1's\r | |
38 | only in the low 28 bits.\r | |
39 | \r | |
40 | @param A The address to validate.\r | |
41 | @param M Additional bits to assert to be zero.\r | |
42 | \r | |
43 | **/\r | |
44 | #define ASSERT_INVALID_PCI_ADDRESS(A,M) \\r | |
45 | ASSERT (((A) & (~0xffff0ff | (M))) == 0)\r | |
46 | \r | |
47 | /**\r | |
48 | Convert a PCI Express address to PCI CF8 address.\r | |
49 | \r | |
50 | @param A The address to convert.\r | |
51 | \r | |
52 | @retval The coverted address.\r | |
53 | \r | |
54 | **/\r | |
55 | #define PCI_TO_CF8_ADDRESS(A) \\r | |
56 | ((UINT32) ((((A) >> 4) & 0xffffff00) | ((A) & 0xfc) | 0x80000000))\r | |
57 | \r | |
58 | \r | |
59 | \r | |
60 | /**\r | |
61 | Reads an 8-bit PCI configuration register.\r | |
62 | \r | |
63 | Reads and returns the 8-bit PCI configuration register specified by Address.\r | |
64 | This function must guarantee that all PCI read and write operations are\r | |
65 | serialized.\r | |
66 | \r | |
67 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
68 | If the register specified by Address >= 0x100, then ASSERT().\r | |
69 | \r | |
70 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
71 | Register.\r | |
72 | \r | |
73 | @return The read value from the PCI configuration register.\r | |
74 | \r | |
75 | **/\r | |
76 | UINT8\r | |
77 | EFIAPI\r | |
78 | PciCf8Read8 (\r | |
79 | IN UINTN Address\r | |
80 | )\r | |
81 | {\r | |
82 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
83 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
84 | return IoRead8 (PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3));\r | |
85 | }\r | |
86 | \r | |
87 | /**\r | |
88 | Writes an 8-bit PCI configuration register.\r | |
89 | \r | |
90 | Writes the 8-bit PCI configuration register specified by Address with the\r | |
91 | value specified by Value. Value is returned. This function must guarantee\r | |
92 | that all PCI read and write operations are serialized.\r | |
93 | \r | |
94 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
95 | If the register specified by Address >= 0x100, then ASSERT().\r | |
96 | \r | |
97 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
98 | Register.\r | |
99 | @param Value The value to write.\r | |
100 | \r | |
101 | @return The value written to the PCI configuration register.\r | |
102 | \r | |
103 | **/\r | |
104 | UINT8\r | |
105 | EFIAPI\r | |
106 | PciCf8Write8 (\r | |
107 | IN UINTN Address,\r | |
108 | IN UINT8 Value\r | |
109 | )\r | |
110 | {\r | |
111 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
112 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
113 | return IoWrite8 (\r | |
114 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
115 | Value\r | |
116 | );\r | |
117 | }\r | |
118 | \r | |
119 | /**\r | |
120 | Performs a bitwise inclusive OR of an 8-bit PCI configuration register with\r | |
121 | an 8-bit value.\r | |
122 | \r | |
123 | Reads the 8-bit PCI configuration register specified by Address, performs a\r | |
124 | bitwise inclusive OR between the read result and the value specified by\r | |
125 | OrData, and writes the result to the 8-bit PCI configuration register\r | |
126 | specified by Address. The value written to the PCI configuration register is\r | |
127 | returned. This function must guarantee that all PCI read and write operations\r | |
128 | are serialized.\r | |
129 | \r | |
130 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
131 | If the register specified by Address >= 0x100, then ASSERT().\r | |
132 | \r | |
133 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
134 | Register.\r | |
135 | @param OrData The value to OR with the PCI configuration register.\r | |
136 | \r | |
137 | @return The value written back to the PCI configuration register.\r | |
138 | \r | |
139 | **/\r | |
140 | UINT8\r | |
141 | EFIAPI\r | |
142 | PciCf8Or8 (\r | |
143 | IN UINTN Address,\r | |
144 | IN UINT8 OrData\r | |
145 | )\r | |
146 | {\r | |
147 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
148 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
149 | return IoOr8 (\r | |
150 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
151 | OrData\r | |
152 | );\r | |
153 | }\r | |
154 | \r | |
155 | /**\r | |
156 | Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit\r | |
157 | value.\r | |
158 | \r | |
159 | Reads the 8-bit PCI configuration register specified by Address, performs a\r | |
160 | bitwise AND between the read result and the value specified by AndData, and\r | |
161 | writes the result to the 8-bit PCI configuration register specified by\r | |
162 | Address. The value written to the PCI configuration register is returned.\r | |
163 | This function must guarantee that all PCI read and write operations are\r | |
164 | serialized.\r | |
165 | \r | |
166 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
167 | If the register specified by Address >= 0x100, then ASSERT().\r | |
168 | \r | |
169 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
170 | Register.\r | |
171 | @param AndData The value to AND with the PCI configuration register.\r | |
172 | \r | |
173 | @return The value written back to the PCI configuration register.\r | |
174 | \r | |
175 | **/\r | |
176 | UINT8\r | |
177 | EFIAPI\r | |
178 | PciCf8And8 (\r | |
179 | IN UINTN Address,\r | |
180 | IN UINT8 AndData\r | |
181 | )\r | |
182 | {\r | |
183 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
184 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
185 | return IoAnd8 (\r | |
186 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
187 | AndData\r | |
188 | );\r | |
189 | }\r | |
190 | \r | |
191 | /**\r | |
192 | Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit\r | |
193 | value, followed a bitwise inclusive OR with another 8-bit value.\r | |
194 | \r | |
195 | Reads the 8-bit PCI configuration register specified by Address, performs a\r | |
196 | bitwise AND between the read result and the value specified by AndData,\r | |
197 | performs a bitwise inclusive OR between the result of the AND operation and\r | |
198 | the value specified by OrData, and writes the result to the 8-bit PCI\r | |
199 | configuration register specified by Address. The value written to the PCI\r | |
200 | configuration register is returned. This function must guarantee that all PCI\r | |
201 | read and write operations are serialized.\r | |
202 | \r | |
203 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
204 | If the register specified by Address >= 0x100, then ASSERT().\r | |
205 | \r | |
206 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
207 | Register.\r | |
208 | @param AndData The value to AND with the PCI configuration register.\r | |
209 | @param OrData The value to OR with the result of the AND operation.\r | |
210 | \r | |
211 | @return The value written back to the PCI configuration register.\r | |
212 | \r | |
213 | **/\r | |
214 | UINT8\r | |
215 | EFIAPI\r | |
216 | PciCf8AndThenOr8 (\r | |
217 | IN UINTN Address,\r | |
218 | IN UINT8 AndData,\r | |
219 | IN UINT8 OrData\r | |
220 | )\r | |
221 | {\r | |
222 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
223 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
224 | return IoAndThenOr8 (\r | |
225 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
226 | AndData,\r | |
227 | OrData\r | |
228 | );\r | |
229 | }\r | |
230 | \r | |
231 | /**\r | |
232 | Reads a bit field of a PCI configuration register.\r | |
233 | \r | |
234 | Reads the bit field in an 8-bit PCI configuration register. The bit field is\r | |
235 | specified by the StartBit and the EndBit. The value of the bit field is\r | |
236 | returned.\r | |
237 | \r | |
238 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
239 | If the register specified by Address >= 0x100, then ASSERT().\r | |
240 | If StartBit is greater than 7, then ASSERT().\r | |
241 | If EndBit is greater than 7, then ASSERT().\r | |
242 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
243 | \r | |
244 | @param Address PCI configuration register to read.\r | |
245 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
246 | Range 0..7.\r | |
247 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
248 | Range 0..7.\r | |
249 | \r | |
250 | @return The value of the bit field read from the PCI configuration register.\r | |
251 | \r | |
252 | **/\r | |
253 | UINT8\r | |
254 | EFIAPI\r | |
255 | PciCf8BitFieldRead8 (\r | |
256 | IN UINTN Address,\r | |
257 | IN UINTN StartBit,\r | |
258 | IN UINTN EndBit\r | |
259 | )\r | |
260 | {\r | |
261 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
262 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
263 | return IoBitFieldRead8 (\r | |
264 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
265 | StartBit,\r | |
266 | EndBit\r | |
267 | );\r | |
268 | }\r | |
269 | \r | |
270 | /**\r | |
271 | Writes a bit field to a PCI configuration register.\r | |
272 | \r | |
273 | Writes Value to the bit field of the PCI configuration register. The bit\r | |
274 | field is specified by the StartBit and the EndBit. All other bits in the\r | |
275 | destination PCI configuration register are preserved. The new value of the\r | |
276 | 8-bit register is returned.\r | |
277 | \r | |
278 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
279 | If the register specified by Address >= 0x100, then ASSERT().\r | |
280 | If StartBit is greater than 7, then ASSERT().\r | |
281 | If EndBit is greater than 7, then ASSERT().\r | |
282 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
283 | \r | |
284 | @param Address PCI configuration register to write.\r | |
285 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
286 | Range 0..7.\r | |
287 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
288 | Range 0..7.\r | |
289 | @param Value New value of the bit field.\r | |
290 | \r | |
291 | @return The value written back to the PCI configuration register.\r | |
292 | \r | |
293 | **/\r | |
294 | UINT8\r | |
295 | EFIAPI\r | |
296 | PciCf8BitFieldWrite8 (\r | |
297 | IN UINTN Address,\r | |
298 | IN UINTN StartBit,\r | |
299 | IN UINTN EndBit,\r | |
300 | IN UINT8 Value\r | |
301 | )\r | |
302 | {\r | |
303 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
304 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
305 | return IoBitFieldWrite8 (\r | |
306 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
307 | StartBit,\r | |
308 | EndBit,\r | |
309 | Value\r | |
310 | );\r | |
311 | }\r | |
312 | \r | |
313 | /**\r | |
314 | Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and\r | |
315 | writes the result back to the bit field in the 8-bit port.\r | |
316 | \r | |
317 | Reads the 8-bit PCI configuration register specified by Address, performs a\r | |
318 | bitwise inclusive OR between the read result and the value specified by\r | |
319 | OrData, and writes the result to the 8-bit PCI configuration register\r | |
320 | specified by Address. The value written to the PCI configuration register is\r | |
321 | returned. This function must guarantee that all PCI read and write operations\r | |
322 | are serialized. Extra left bits in OrData are stripped.\r | |
323 | \r | |
324 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
325 | If the register specified by Address >= 0x100, then ASSERT().\r | |
326 | If StartBit is greater than 7, then ASSERT().\r | |
327 | If EndBit is greater than 7, then ASSERT().\r | |
328 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
329 | \r | |
330 | @param Address PCI configuration register to write.\r | |
331 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
332 | Range 0..7.\r | |
333 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
334 | Range 0..7.\r | |
335 | @param OrData The value to OR with the PCI configuration register.\r | |
336 | \r | |
337 | @return The value written back to the PCI configuration register.\r | |
338 | \r | |
339 | **/\r | |
340 | UINT8\r | |
341 | EFIAPI\r | |
342 | PciCf8BitFieldOr8 (\r | |
343 | IN UINTN Address,\r | |
344 | IN UINTN StartBit,\r | |
345 | IN UINTN EndBit,\r | |
346 | IN UINT8 OrData\r | |
347 | )\r | |
348 | {\r | |
349 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
350 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
351 | return IoBitFieldOr8 (\r | |
352 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
353 | StartBit,\r | |
354 | EndBit,\r | |
355 | OrData\r | |
356 | );\r | |
357 | }\r | |
358 | \r | |
359 | /**\r | |
360 | Reads a bit field in an 8-bit PCI configuration register, performs a bitwise\r | |
361 | AND, and writes the result back to the bit field in the 8-bit register.\r | |
362 | \r | |
363 | Reads the 8-bit PCI configuration register specified by Address, performs a\r | |
364 | bitwise AND between the read result and the value specified by AndData, and\r | |
365 | writes the result to the 8-bit PCI configuration register specified by\r | |
366 | Address. The value written to the PCI configuration register is returned.\r | |
367 | This function must guarantee that all PCI read and write operations are\r | |
368 | serialized. Extra left bits in AndData are stripped.\r | |
369 | \r | |
370 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
371 | If the register specified by Address >= 0x100, then ASSERT().\r | |
372 | If StartBit is greater than 7, then ASSERT().\r | |
373 | If EndBit is greater than 7, then ASSERT().\r | |
374 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
375 | \r | |
376 | @param Address PCI configuration register to write.\r | |
377 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
378 | Range 0..7.\r | |
379 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
380 | Range 0..7.\r | |
381 | @param AndData The value to AND with the PCI configuration register.\r | |
382 | \r | |
383 | @return The value written back to the PCI configuration register.\r | |
384 | \r | |
385 | **/\r | |
386 | UINT8\r | |
387 | EFIAPI\r | |
388 | PciCf8BitFieldAnd8 (\r | |
389 | IN UINTN Address,\r | |
390 | IN UINTN StartBit,\r | |
391 | IN UINTN EndBit,\r | |
392 | IN UINT8 AndData\r | |
393 | )\r | |
394 | {\r | |
395 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
396 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
397 | return IoBitFieldAnd8 (\r | |
398 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
399 | StartBit,\r | |
400 | EndBit,\r | |
401 | AndData\r | |
402 | );\r | |
403 | }\r | |
404 | \r | |
405 | /**\r | |
406 | Reads a bit field in an 8-bit port, performs a bitwise AND followed by a\r | |
407 | bitwise inclusive OR, and writes the result back to the bit field in the\r | |
408 | 8-bit port.\r | |
409 | \r | |
410 | Reads the 8-bit PCI configuration register specified by Address, performs a\r | |
411 | bitwise AND followed by a bitwise inclusive OR between the read result and\r | |
412 | the value specified by AndData, and writes the result to the 8-bit PCI\r | |
413 | configuration register specified by Address. The value written to the PCI\r | |
414 | configuration register is returned. This function must guarantee that all PCI\r | |
415 | read and write operations are serialized. Extra left bits in both AndData and\r | |
416 | OrData are stripped.\r | |
417 | \r | |
418 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
419 | If the register specified by Address >= 0x100, then ASSERT().\r | |
420 | If StartBit is greater than 7, then ASSERT().\r | |
421 | If EndBit is greater than 7, then ASSERT().\r | |
422 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
423 | \r | |
424 | @param Address PCI configuration register to write.\r | |
425 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
426 | Range 0..7.\r | |
427 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
428 | Range 0..7.\r | |
429 | @param AndData The value to AND with the PCI configuration register.\r | |
430 | @param OrData The value to OR with the result of the AND operation.\r | |
431 | \r | |
432 | @return The value written back to the PCI configuration register.\r | |
433 | \r | |
434 | **/\r | |
435 | UINT8\r | |
436 | EFIAPI\r | |
437 | PciCf8BitFieldAndThenOr8(\r | |
438 | IN UINTN Address,\r | |
439 | IN UINTN StartBit,\r | |
440 | IN UINTN EndBit,\r | |
441 | IN UINT8 AndData,\r | |
442 | IN UINT8 OrData\r | |
443 | )\r | |
444 | {\r | |
445 | ASSERT_INVALID_PCI_ADDRESS (Address, 0);\r | |
446 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
447 | return IoBitFieldAndThenOr8 (\r | |
448 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),\r | |
449 | StartBit,\r | |
450 | EndBit,\r | |
451 | AndData,\r | |
452 | OrData\r | |
453 | );\r | |
454 | }\r | |
455 | \r | |
456 | /**\r | |
457 | Reads a 16-bit PCI configuration register.\r | |
458 | \r | |
459 | Reads and returns the 16-bit PCI configuration register specified by Address.\r | |
460 | This function must guarantee that all PCI read and write operations are\r | |
461 | serialized.\r | |
462 | \r | |
463 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
464 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
465 | If the register specified by Address >= 0x100, then ASSERT().\r | |
466 | \r | |
467 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
468 | Register.\r | |
469 | \r | |
470 | @return The read value from the PCI configuration register.\r | |
471 | \r | |
472 | **/\r | |
473 | UINT16\r | |
474 | EFIAPI\r | |
475 | PciCf8Read16 (\r | |
476 | IN UINTN Address\r | |
477 | )\r | |
478 | {\r | |
479 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
480 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
481 | return IoRead16 (PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2));\r | |
482 | }\r | |
483 | \r | |
484 | /**\r | |
485 | Writes a 16-bit PCI configuration register.\r | |
486 | \r | |
487 | Writes the 16-bit PCI configuration register specified by Address with the\r | |
488 | value specified by Value. Value is returned. This function must guarantee\r | |
489 | that all PCI read and write operations are serialized.\r | |
490 | \r | |
491 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
492 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
493 | If the register specified by Address >= 0x100, then ASSERT().\r | |
494 | \r | |
495 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
496 | Register.\r | |
497 | @param Value The value to write.\r | |
498 | \r | |
499 | @return The value written to the PCI configuration register.\r | |
500 | \r | |
501 | **/\r | |
502 | UINT16\r | |
503 | EFIAPI\r | |
504 | PciCf8Write16 (\r | |
505 | IN UINTN Address,\r | |
506 | IN UINT16 Value\r | |
507 | )\r | |
508 | {\r | |
509 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
510 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
511 | return IoWrite16 (\r | |
512 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
513 | Value\r | |
514 | );\r | |
515 | }\r | |
516 | \r | |
517 | /**\r | |
518 | Performs a bitwise inclusive OR of a 16-bit PCI configuration register with\r | |
519 | a 16-bit value.\r | |
520 | \r | |
521 | Reads the 16-bit PCI configuration register specified by Address, performs a\r | |
522 | bitwise inclusive OR between the read result and the value specified by\r | |
523 | OrData, and writes the result to the 16-bit PCI configuration register\r | |
524 | specified by Address. The value written to the PCI configuration register is\r | |
525 | returned. This function must guarantee that all PCI read and write operations\r | |
526 | are serialized.\r | |
527 | \r | |
528 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
529 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
530 | If the register specified by Address >= 0x100, then ASSERT().\r | |
531 | \r | |
532 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
533 | Register.\r | |
534 | @param OrData The value to OR with the PCI configuration register.\r | |
535 | \r | |
536 | @return The value written back to the PCI configuration register.\r | |
537 | \r | |
538 | **/\r | |
539 | UINT16\r | |
540 | EFIAPI\r | |
541 | PciCf8Or16 (\r | |
542 | IN UINTN Address,\r | |
543 | IN UINT16 OrData\r | |
544 | )\r | |
545 | {\r | |
546 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
547 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
548 | return IoOr16 (\r | |
549 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
550 | OrData\r | |
551 | );\r | |
552 | }\r | |
553 | \r | |
554 | /**\r | |
555 | Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit\r | |
556 | value.\r | |
557 | \r | |
558 | Reads the 16-bit PCI configuration register specified by Address, performs a\r | |
559 | bitwise AND between the read result and the value specified by AndData, and\r | |
560 | writes the result to the 16-bit PCI configuration register specified by\r | |
561 | Address. The value written to the PCI configuration register is returned.\r | |
562 | This function must guarantee that all PCI read and write operations are\r | |
563 | serialized.\r | |
564 | \r | |
565 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
566 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
567 | If the register specified by Address >= 0x100, then ASSERT().\r | |
568 | \r | |
569 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
570 | Register.\r | |
571 | @param AndData The value to AND with the PCI configuration register.\r | |
572 | \r | |
573 | @return The value written back to the PCI configuration register.\r | |
574 | \r | |
575 | **/\r | |
576 | UINT16\r | |
577 | EFIAPI\r | |
578 | PciCf8And16 (\r | |
579 | IN UINTN Address,\r | |
580 | IN UINT16 AndData\r | |
581 | )\r | |
582 | {\r | |
583 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
584 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
585 | return IoAnd16 (\r | |
586 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
587 | AndData\r | |
588 | );\r | |
589 | }\r | |
590 | \r | |
591 | /**\r | |
592 | Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit\r | |
593 | value, followed a bitwise inclusive OR with another 16-bit value.\r | |
594 | \r | |
595 | Reads the 16-bit PCI configuration register specified by Address, performs a\r | |
596 | bitwise AND between the read result and the value specified by AndData,\r | |
597 | performs a bitwise inclusive OR between the result of the AND operation and\r | |
598 | the value specified by OrData, and writes the result to the 16-bit PCI\r | |
599 | configuration register specified by Address. The value written to the PCI\r | |
600 | configuration register is returned. This function must guarantee that all PCI\r | |
601 | read and write operations are serialized.\r | |
602 | \r | |
603 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
604 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
605 | If the register specified by Address >= 0x100, then ASSERT().\r | |
606 | \r | |
607 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
608 | Register.\r | |
609 | @param AndData The value to AND with the PCI configuration register.\r | |
610 | @param OrData The value to OR with the result of the AND operation.\r | |
611 | \r | |
612 | @return The value written back to the PCI configuration register.\r | |
613 | \r | |
614 | **/\r | |
615 | UINT16\r | |
616 | EFIAPI\r | |
617 | PciCf8AndThenOr16 (\r | |
618 | IN UINTN Address,\r | |
619 | IN UINT16 AndData,\r | |
620 | IN UINT16 OrData\r | |
621 | )\r | |
622 | {\r | |
623 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
624 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
625 | return IoAndThenOr16 (\r | |
626 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
627 | AndData,\r | |
628 | OrData\r | |
629 | );\r | |
630 | }\r | |
631 | \r | |
632 | /**\r | |
633 | Reads a bit field of a PCI configuration register.\r | |
634 | \r | |
635 | Reads the bit field in a 16-bit PCI configuration register. The bit field is\r | |
636 | specified by the StartBit and the EndBit. The value of the bit field is\r | |
637 | returned.\r | |
638 | \r | |
639 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
640 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
641 | If the register specified by Address >= 0x100, then ASSERT().\r | |
642 | If StartBit is greater than 15, then ASSERT().\r | |
643 | If EndBit is greater than 15, then ASSERT().\r | |
644 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
645 | \r | |
646 | @param Address PCI configuration register to read.\r | |
647 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
648 | Range 0..15.\r | |
649 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
650 | Range 0..15.\r | |
651 | \r | |
652 | @return The value of the bit field read from the PCI configuration register.\r | |
653 | \r | |
654 | **/\r | |
655 | UINT16\r | |
656 | EFIAPI\r | |
657 | PciCf8BitFieldRead16 (\r | |
658 | IN UINTN Address,\r | |
659 | IN UINTN StartBit,\r | |
660 | IN UINTN EndBit\r | |
661 | )\r | |
662 | {\r | |
663 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
664 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
665 | return IoBitFieldRead16 (\r | |
666 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
667 | StartBit,\r | |
668 | EndBit\r | |
669 | );\r | |
670 | }\r | |
671 | \r | |
672 | /**\r | |
673 | Writes a bit field to a PCI configuration register.\r | |
674 | \r | |
675 | Writes Value to the bit field of the PCI configuration register. The bit\r | |
676 | field is specified by the StartBit and the EndBit. All other bits in the\r | |
677 | destination PCI configuration register are preserved. The new value of the\r | |
678 | 16-bit register is returned.\r | |
679 | \r | |
680 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
681 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
682 | If the register specified by Address >= 0x100, then ASSERT().\r | |
683 | If StartBit is greater than 15, then ASSERT().\r | |
684 | If EndBit is greater than 15, then ASSERT().\r | |
685 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
686 | \r | |
687 | @param Address PCI configuration register to write.\r | |
688 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
689 | Range 0..15.\r | |
690 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
691 | Range 0..15.\r | |
692 | @param Value New value of the bit field.\r | |
693 | \r | |
694 | @return The value written back to the PCI configuration register.\r | |
695 | \r | |
696 | **/\r | |
697 | UINT16\r | |
698 | EFIAPI\r | |
699 | PciCf8BitFieldWrite16 (\r | |
700 | IN UINTN Address,\r | |
701 | IN UINTN StartBit,\r | |
702 | IN UINTN EndBit,\r | |
703 | IN UINT16 Value\r | |
704 | )\r | |
705 | {\r | |
706 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
707 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
708 | return IoBitFieldWrite16 (\r | |
709 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
710 | StartBit,\r | |
711 | EndBit,\r | |
712 | Value\r | |
713 | );\r | |
714 | }\r | |
715 | \r | |
716 | /**\r | |
717 | Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and\r | |
718 | writes the result back to the bit field in the 16-bit port.\r | |
719 | \r | |
720 | Reads the 16-bit PCI configuration register specified by Address, performs a\r | |
721 | bitwise inclusive OR between the read result and the value specified by\r | |
722 | OrData, and writes the result to the 16-bit PCI configuration register\r | |
723 | specified by Address. The value written to the PCI configuration register is\r | |
724 | returned. This function must guarantee that all PCI read and write operations\r | |
725 | are serialized. Extra left bits in OrData are stripped.\r | |
726 | \r | |
727 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
728 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
729 | If the register specified by Address >= 0x100, then ASSERT().\r | |
730 | If StartBit is greater than 15, then ASSERT().\r | |
731 | If EndBit is greater than 15, then ASSERT().\r | |
732 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
733 | \r | |
734 | @param Address PCI configuration register to write.\r | |
735 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
736 | Range 0..15.\r | |
737 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
738 | Range 0..15.\r | |
739 | @param OrData The value to OR with the PCI configuration register.\r | |
740 | \r | |
741 | @return The value written back to the PCI configuration register.\r | |
742 | \r | |
743 | **/\r | |
744 | UINT16\r | |
745 | EFIAPI\r | |
746 | PciCf8BitFieldOr16 (\r | |
747 | IN UINTN Address,\r | |
748 | IN UINTN StartBit,\r | |
749 | IN UINTN EndBit,\r | |
750 | IN UINT16 OrData\r | |
751 | )\r | |
752 | {\r | |
753 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
754 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
755 | return IoBitFieldOr16 (\r | |
756 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
757 | StartBit,\r | |
758 | EndBit,\r | |
759 | OrData\r | |
760 | );\r | |
761 | }\r | |
762 | \r | |
763 | /**\r | |
764 | Reads a bit field in a 16-bit PCI configuration register, performs a bitwise\r | |
765 | AND, and writes the result back to the bit field in the 16-bit register.\r | |
766 | \r | |
767 | Reads the 16-bit PCI configuration register specified by Address, performs a\r | |
768 | bitwise AND between the read result and the value specified by AndData, and\r | |
769 | writes the result to the 16-bit PCI configuration register specified by\r | |
770 | Address. The value written to the PCI configuration register is returned.\r | |
771 | This function must guarantee that all PCI read and write operations are\r | |
772 | serialized. Extra left bits in AndData are stripped.\r | |
773 | \r | |
774 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
775 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
776 | If the register specified by Address >= 0x100, then ASSERT().\r | |
777 | If StartBit is greater than 15, then ASSERT().\r | |
778 | If EndBit is greater than 15, then ASSERT().\r | |
779 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
780 | \r | |
781 | @param Address PCI configuration register to write.\r | |
782 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
783 | Range 0..15.\r | |
784 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
785 | Range 0..15.\r | |
786 | @param AndData The value to AND with the PCI configuration register.\r | |
787 | \r | |
788 | @return The value written back to the PCI configuration register.\r | |
789 | \r | |
790 | **/\r | |
791 | UINT16\r | |
792 | EFIAPI\r | |
793 | PciCf8BitFieldAnd16 (\r | |
794 | IN UINTN Address,\r | |
795 | IN UINTN StartBit,\r | |
796 | IN UINTN EndBit,\r | |
797 | IN UINT16 AndData\r | |
798 | )\r | |
799 | {\r | |
800 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
801 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
802 | return IoBitFieldAnd16 (\r | |
803 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
804 | StartBit,\r | |
805 | EndBit,\r | |
806 | AndData\r | |
807 | );\r | |
808 | }\r | |
809 | \r | |
810 | /**\r | |
811 | Reads a bit field in a 16-bit port, performs a bitwise AND followed by a\r | |
812 | bitwise inclusive OR, and writes the result back to the bit field in the\r | |
813 | 16-bit port.\r | |
814 | \r | |
815 | Reads the 16-bit PCI configuration register specified by Address, performs a\r | |
816 | bitwise AND followed by a bitwise inclusive OR between the read result and\r | |
817 | the value specified by AndData, and writes the result to the 16-bit PCI\r | |
818 | configuration register specified by Address. The value written to the PCI\r | |
819 | configuration register is returned. This function must guarantee that all PCI\r | |
820 | read and write operations are serialized. Extra left bits in both AndData and\r | |
821 | OrData are stripped.\r | |
822 | \r | |
823 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
824 | If Address is not aligned on a 16-bit boundary, then ASSERT().\r | |
825 | If the register specified by Address >= 0x100, then ASSERT().\r | |
826 | If StartBit is greater than 15, then ASSERT().\r | |
827 | If EndBit is greater than 15, then ASSERT().\r | |
828 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
829 | \r | |
830 | @param Address PCI configuration register to write.\r | |
831 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
832 | Range 0..15.\r | |
833 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
834 | Range 0..15.\r | |
835 | @param AndData The value to AND with the PCI configuration register.\r | |
836 | @param OrData The value to OR with the result of the AND operation.\r | |
837 | \r | |
838 | @return The value written back to the PCI configuration register.\r | |
839 | \r | |
840 | **/\r | |
841 | UINT16\r | |
842 | EFIAPI\r | |
843 | PciCf8BitFieldAndThenOr16(\r | |
844 | IN UINTN Address,\r | |
845 | IN UINTN StartBit,\r | |
846 | IN UINTN EndBit,\r | |
847 | IN UINT16 AndData,\r | |
848 | IN UINT16 OrData\r | |
849 | )\r | |
850 | {\r | |
851 | ASSERT_INVALID_PCI_ADDRESS (Address, 1);\r | |
852 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
853 | return IoBitFieldAndThenOr16 (\r | |
854 | PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),\r | |
855 | StartBit,\r | |
856 | EndBit,\r | |
857 | AndData,\r | |
858 | OrData\r | |
859 | );\r | |
860 | }\r | |
861 | \r | |
862 | /**\r | |
863 | Reads a 32-bit PCI configuration register.\r | |
864 | \r | |
865 | Reads and returns the 32-bit PCI configuration register specified by Address.\r | |
866 | This function must guarantee that all PCI read and write operations are\r | |
867 | serialized.\r | |
868 | \r | |
869 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
870 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
871 | If the register specified by Address >= 0x100, then ASSERT().\r | |
872 | \r | |
873 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
874 | Register.\r | |
875 | \r | |
876 | @return The read value from the PCI configuration register.\r | |
877 | \r | |
878 | **/\r | |
879 | UINT32\r | |
880 | EFIAPI\r | |
881 | PciCf8Read32 (\r | |
882 | IN UINTN Address\r | |
883 | )\r | |
884 | {\r | |
885 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
886 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
887 | return IoRead32 (PCI_CONFIGURATION_DATA_PORT);\r | |
888 | }\r | |
889 | \r | |
890 | /**\r | |
891 | Writes a 32-bit PCI configuration register.\r | |
892 | \r | |
893 | Writes the 32-bit PCI configuration register specified by Address with the\r | |
894 | value specified by Value. Value is returned. This function must guarantee\r | |
895 | that all PCI read and write operations are serialized.\r | |
896 | \r | |
897 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
898 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
899 | If the register specified by Address >= 0x100, then ASSERT().\r | |
900 | \r | |
901 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
902 | Register.\r | |
903 | @param Value The value to write.\r | |
904 | \r | |
905 | @return The value written to the PCI configuration register.\r | |
906 | \r | |
907 | **/\r | |
908 | UINT32\r | |
909 | EFIAPI\r | |
910 | PciCf8Write32 (\r | |
911 | IN UINTN Address,\r | |
912 | IN UINT32 Value\r | |
913 | )\r | |
914 | {\r | |
915 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
916 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
917 | return IoWrite32 (\r | |
918 | PCI_CONFIGURATION_DATA_PORT,\r | |
919 | Value\r | |
920 | );\r | |
921 | }\r | |
922 | \r | |
923 | /**\r | |
924 | Performs a bitwise inclusive OR of a 32-bit PCI configuration register with\r | |
925 | a 32-bit value.\r | |
926 | \r | |
927 | Reads the 32-bit PCI configuration register specified by Address, performs a\r | |
928 | bitwise inclusive OR between the read result and the value specified by\r | |
929 | OrData, and writes the result to the 32-bit PCI configuration register\r | |
930 | specified by Address. The value written to the PCI configuration register is\r | |
931 | returned. This function must guarantee that all PCI read and write operations\r | |
932 | are serialized.\r | |
933 | \r | |
934 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
935 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
936 | If the register specified by Address >= 0x100, then ASSERT().\r | |
937 | \r | |
938 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
939 | Register.\r | |
940 | @param OrData The value to OR with the PCI configuration register.\r | |
941 | \r | |
942 | @return The value written back to the PCI configuration register.\r | |
943 | \r | |
944 | **/\r | |
945 | UINT32\r | |
946 | EFIAPI\r | |
947 | PciCf8Or32 (\r | |
948 | IN UINTN Address,\r | |
949 | IN UINT32 OrData\r | |
950 | )\r | |
951 | {\r | |
952 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
953 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
954 | return IoOr32 (\r | |
955 | PCI_CONFIGURATION_DATA_PORT,\r | |
956 | OrData\r | |
957 | );\r | |
958 | }\r | |
959 | \r | |
960 | /**\r | |
961 | Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit\r | |
962 | value.\r | |
963 | \r | |
964 | Reads the 32-bit PCI configuration register specified by Address, performs a\r | |
965 | bitwise AND between the read result and the value specified by AndData, and\r | |
966 | writes the result to the 32-bit PCI configuration register specified by\r | |
967 | Address. The value written to the PCI configuration register is returned.\r | |
968 | This function must guarantee that all PCI read and write operations are\r | |
969 | serialized.\r | |
970 | \r | |
971 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
972 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
973 | If the register specified by Address >= 0x100, then ASSERT().\r | |
974 | \r | |
975 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
976 | Register.\r | |
977 | @param AndData The value to AND with the PCI configuration register.\r | |
978 | \r | |
979 | @return The value written back to the PCI configuration register.\r | |
980 | \r | |
981 | **/\r | |
982 | UINT32\r | |
983 | EFIAPI\r | |
984 | PciCf8And32 (\r | |
985 | IN UINTN Address,\r | |
986 | IN UINT32 AndData\r | |
987 | )\r | |
988 | {\r | |
989 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
990 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
991 | return IoAnd32 (\r | |
992 | PCI_CONFIGURATION_DATA_PORT,\r | |
993 | AndData\r | |
994 | );\r | |
995 | }\r | |
996 | \r | |
997 | /**\r | |
998 | Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit\r | |
999 | value, followed a bitwise inclusive OR with another 32-bit value.\r | |
1000 | \r | |
1001 | Reads the 32-bit PCI configuration register specified by Address, performs a\r | |
1002 | bitwise AND between the read result and the value specified by AndData,\r | |
1003 | performs a bitwise inclusive OR between the result of the AND operation and\r | |
1004 | the value specified by OrData, and writes the result to the 32-bit PCI\r | |
1005 | configuration register specified by Address. The value written to the PCI\r | |
1006 | configuration register is returned. This function must guarantee that all PCI\r | |
1007 | read and write operations are serialized.\r | |
1008 | \r | |
1009 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
1010 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
1011 | If the register specified by Address >= 0x100, then ASSERT().\r | |
1012 | \r | |
1013 | @param Address Address that encodes the PCI Bus, Device, Function and\r | |
1014 | Register.\r | |
1015 | @param AndData The value to AND with the PCI configuration register.\r | |
1016 | @param OrData The value to OR with the result of the AND operation.\r | |
1017 | \r | |
1018 | @return The value written back to the PCI configuration register.\r | |
1019 | \r | |
1020 | **/\r | |
1021 | UINT32\r | |
1022 | EFIAPI\r | |
1023 | PciCf8AndThenOr32 (\r | |
1024 | IN UINTN Address,\r | |
1025 | IN UINT32 AndData,\r | |
1026 | IN UINT32 OrData\r | |
1027 | )\r | |
1028 | {\r | |
1029 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
1030 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
1031 | return IoAndThenOr32 (\r | |
1032 | PCI_CONFIGURATION_DATA_PORT,\r | |
1033 | AndData,\r | |
1034 | OrData\r | |
1035 | );\r | |
1036 | }\r | |
1037 | \r | |
1038 | /**\r | |
1039 | Reads a bit field of a PCI configuration register.\r | |
1040 | \r | |
1041 | Reads the bit field in a 32-bit PCI configuration register. The bit field is\r | |
1042 | specified by the StartBit and the EndBit. The value of the bit field is\r | |
1043 | returned.\r | |
1044 | \r | |
1045 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
1046 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
1047 | If the register specified by Address >= 0x100, then ASSERT().\r | |
1048 | If StartBit is greater than 31, then ASSERT().\r | |
1049 | If EndBit is greater than 31, then ASSERT().\r | |
1050 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
1051 | \r | |
1052 | @param Address PCI configuration register to read.\r | |
1053 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
1054 | Range 0..31.\r | |
1055 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
1056 | Range 0..31.\r | |
1057 | \r | |
1058 | @return The value of the bit field read from the PCI configuration register.\r | |
1059 | \r | |
1060 | **/\r | |
1061 | UINT32\r | |
1062 | EFIAPI\r | |
1063 | PciCf8BitFieldRead32 (\r | |
1064 | IN UINTN Address,\r | |
1065 | IN UINTN StartBit,\r | |
1066 | IN UINTN EndBit\r | |
1067 | )\r | |
1068 | {\r | |
1069 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
1070 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
1071 | return IoBitFieldRead32 (\r | |
1072 | PCI_CONFIGURATION_DATA_PORT,\r | |
1073 | StartBit,\r | |
1074 | EndBit\r | |
1075 | );\r | |
1076 | }\r | |
1077 | \r | |
1078 | /**\r | |
1079 | Writes a bit field to a PCI configuration register.\r | |
1080 | \r | |
1081 | Writes Value to the bit field of the PCI configuration register. The bit\r | |
1082 | field is specified by the StartBit and the EndBit. All other bits in the\r | |
1083 | destination PCI configuration register are preserved. The new value of the\r | |
1084 | 32-bit register is returned.\r | |
1085 | \r | |
1086 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
1087 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
1088 | If the register specified by Address >= 0x100, then ASSERT().\r | |
1089 | If StartBit is greater than 31, then ASSERT().\r | |
1090 | If EndBit is greater than 31, then ASSERT().\r | |
1091 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
1092 | \r | |
1093 | @param Address PCI configuration register to write.\r | |
1094 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
1095 | Range 0..31.\r | |
1096 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
1097 | Range 0..31.\r | |
1098 | @param Value New value of the bit field.\r | |
1099 | \r | |
1100 | @return The value written back to the PCI configuration register.\r | |
1101 | \r | |
1102 | **/\r | |
1103 | UINT32\r | |
1104 | EFIAPI\r | |
1105 | PciCf8BitFieldWrite32 (\r | |
1106 | IN UINTN Address,\r | |
1107 | IN UINTN StartBit,\r | |
1108 | IN UINTN EndBit,\r | |
1109 | IN UINT32 Value\r | |
1110 | )\r | |
1111 | {\r | |
1112 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
1113 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
1114 | return IoBitFieldWrite32 (\r | |
1115 | PCI_CONFIGURATION_DATA_PORT,\r | |
1116 | StartBit,\r | |
1117 | EndBit,\r | |
1118 | Value\r | |
1119 | );\r | |
1120 | }\r | |
1121 | \r | |
1122 | /**\r | |
1123 | Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and\r | |
1124 | writes the result back to the bit field in the 32-bit port.\r | |
1125 | \r | |
1126 | Reads the 32-bit PCI configuration register specified by Address, performs a\r | |
1127 | bitwise inclusive OR between the read result and the value specified by\r | |
1128 | OrData, and writes the result to the 32-bit PCI configuration register\r | |
1129 | specified by Address. The value written to the PCI configuration register is\r | |
1130 | returned. This function must guarantee that all PCI read and write operations\r | |
1131 | are serialized. Extra left bits in OrData are stripped.\r | |
1132 | \r | |
1133 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
1134 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
1135 | If the register specified by Address >= 0x100, then ASSERT().\r | |
1136 | If StartBit is greater than 31, then ASSERT().\r | |
1137 | If EndBit is greater than 31, then ASSERT().\r | |
1138 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
1139 | \r | |
1140 | @param Address PCI configuration register to write.\r | |
1141 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
1142 | Range 0..31.\r | |
1143 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
1144 | Range 0..31.\r | |
1145 | @param OrData The value to OR with the PCI configuration register.\r | |
1146 | \r | |
1147 | @return The value written back to the PCI configuration register.\r | |
1148 | \r | |
1149 | **/\r | |
1150 | UINT32\r | |
1151 | EFIAPI\r | |
1152 | PciCf8BitFieldOr32 (\r | |
1153 | IN UINTN Address,\r | |
1154 | IN UINTN StartBit,\r | |
1155 | IN UINTN EndBit,\r | |
1156 | IN UINT32 OrData\r | |
1157 | )\r | |
1158 | {\r | |
1159 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
1160 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
1161 | return IoBitFieldOr32 (\r | |
1162 | PCI_CONFIGURATION_DATA_PORT,\r | |
1163 | StartBit,\r | |
1164 | EndBit,\r | |
1165 | OrData\r | |
1166 | );\r | |
1167 | }\r | |
1168 | \r | |
1169 | /**\r | |
1170 | Reads a bit field in a 32-bit PCI configuration register, performs a bitwise\r | |
1171 | AND, and writes the result back to the bit field in the 32-bit register.\r | |
1172 | \r | |
1173 | Reads the 32-bit PCI configuration register specified by Address, performs a\r | |
1174 | bitwise AND between the read result and the value specified by AndData, and\r | |
1175 | writes the result to the 32-bit PCI configuration register specified by\r | |
1176 | Address. The value written to the PCI configuration register is returned.\r | |
1177 | This function must guarantee that all PCI read and write operations are\r | |
1178 | serialized. Extra left bits in AndData are stripped.\r | |
1179 | \r | |
1180 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
1181 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
1182 | If the register specified by Address >= 0x100, then ASSERT().\r | |
1183 | If StartBit is greater than 31, then ASSERT().\r | |
1184 | If EndBit is greater than 31, then ASSERT().\r | |
1185 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
1186 | \r | |
1187 | @param Address PCI configuration register to write.\r | |
1188 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
1189 | Range 0..31.\r | |
1190 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
1191 | Range 0..31.\r | |
1192 | @param AndData The value to AND with the PCI configuration register.\r | |
1193 | \r | |
1194 | @return The value written back to the PCI configuration register.\r | |
1195 | \r | |
1196 | **/\r | |
1197 | UINT32\r | |
1198 | EFIAPI\r | |
1199 | PciCf8BitFieldAnd32 (\r | |
1200 | IN UINTN Address,\r | |
1201 | IN UINTN StartBit,\r | |
1202 | IN UINTN EndBit,\r | |
1203 | IN UINT32 AndData\r | |
1204 | )\r | |
1205 | {\r | |
1206 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
1207 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
1208 | return IoBitFieldAnd32 (\r | |
1209 | PCI_CONFIGURATION_DATA_PORT,\r | |
1210 | StartBit,\r | |
1211 | EndBit,\r | |
1212 | AndData\r | |
1213 | );\r | |
1214 | }\r | |
1215 | \r | |
1216 | /**\r | |
1217 | Reads a bit field in a 32-bit port, performs a bitwise AND followed by a\r | |
1218 | bitwise inclusive OR, and writes the result back to the bit field in the\r | |
1219 | 32-bit port.\r | |
1220 | \r | |
1221 | Reads the 32-bit PCI configuration register specified by Address, performs a\r | |
1222 | bitwise AND followed by a bitwise inclusive OR between the read result and\r | |
1223 | the value specified by AndData, and writes the result to the 32-bit PCI\r | |
1224 | configuration register specified by Address. The value written to the PCI\r | |
1225 | configuration register is returned. This function must guarantee that all PCI\r | |
1226 | read and write operations are serialized. Extra left bits in both AndData and\r | |
1227 | OrData are stripped.\r | |
1228 | \r | |
1229 | If Address > 0x0FFFFFFF, then ASSERT().\r | |
1230 | If Address is not aligned on a 32-bit boundary, then ASSERT().\r | |
1231 | If the register specified by Address >= 0x100, then ASSERT().\r | |
1232 | If StartBit is greater than 31, then ASSERT().\r | |
1233 | If EndBit is greater than 31, then ASSERT().\r | |
1234 | If EndBit is less than or equal to StartBit, then ASSERT().\r | |
1235 | \r | |
1236 | @param Address PCI configuration register to write.\r | |
1237 | @param StartBit The ordinal of the least significant bit in the bit field.\r | |
1238 | Range 0..31.\r | |
1239 | @param EndBit The ordinal of the most significant bit in the bit field.\r | |
1240 | Range 0..31.\r | |
1241 | @param AndData The value to AND with the PCI configuration register.\r | |
1242 | @param OrData The value to OR with the result of the AND operation.\r | |
1243 | \r | |
1244 | @return The value written back to the PCI configuration register.\r | |
1245 | \r | |
1246 | **/\r | |
1247 | UINT32\r | |
1248 | EFIAPI\r | |
1249 | PciCf8BitFieldAndThenOr32(\r | |
1250 | IN UINTN Address,\r | |
1251 | IN UINTN StartBit,\r | |
1252 | IN UINTN EndBit,\r | |
1253 | IN UINT32 AndData,\r | |
1254 | IN UINT32 OrData\r | |
1255 | )\r | |
1256 | {\r | |
1257 | ASSERT_INVALID_PCI_ADDRESS (Address, 3);\r | |
1258 | IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));\r | |
1259 | return IoBitFieldAndThenOr32 (\r | |
1260 | PCI_CONFIGURATION_DATA_PORT,\r | |
1261 | StartBit,\r | |
1262 | EndBit,\r | |
1263 | AndData,\r | |
1264 | OrData\r | |
1265 | );\r | |
1266 | }\r | |
1267 | \r | |
1268 | /**\r | |
1269 | Reads a range of PCI configuration registers into a caller supplied buffer.\r | |
1270 | \r | |
1271 | Reads the range of PCI configuration registers specified by StartAddress and\r | |
1272 | Size into the buffer specified by Buffer. This function only allows the PCI\r | |
1273 | configuration registers from a single PCI function to be read. Size is\r | |
1274 | returned. When possible 32-bit PCI configuration read cycles are used to read\r | |
1275 | from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit\r | |
1276 | and 16-bit PCI configuration read cycles may be used at the beginning and the\r | |
1277 | end of the range.\r | |
1278 | \r | |
1279 | If StartAddress > 0x0FFFFFFF, then ASSERT().\r | |
1280 | If the register specified by StartAddress >= 0x100, then ASSERT().\r | |
1281 | If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT().\r | |
1282 | If (StartAddress + Size - 1) > 0x0FFFFFFF, then ASSERT().\r | |
1283 | If Buffer is NULL, then ASSERT().\r | |
1284 | \r | |
1285 | @param StartAddress Starting address that encodes the PCI Bus, Device,\r | |
1286 | Function and Register.\r | |
1287 | @param Size Size in bytes of the transfer.\r | |
1288 | @param Buffer Pointer to a buffer receiving the data read.\r | |
1289 | \r | |
1290 | @return Size\r | |
1291 | \r | |
1292 | **/\r | |
1293 | UINTN\r | |
1294 | EFIAPI\r | |
1295 | PciCf8ReadBuffer (\r | |
1296 | IN UINTN StartAddress,\r | |
1297 | IN UINTN Size,\r | |
1298 | OUT VOID *Buffer\r | |
1299 | )\r | |
1300 | {\r | |
1301 | UINTN EndAddress;\r | |
1302 | \r | |
1303 | EndAddress = StartAddress + Size;\r | |
1304 | \r | |
1305 | if (StartAddress < EndAddress && (StartAddress & 1)) {\r | |
1306 | //\r | |
1307 | // Read a byte if StartAddress is byte aligned\r | |
1308 | //\r | |
1309 | *(UINT8*)Buffer = PciCf8Read8 (StartAddress);\r | |
1310 | StartAddress += sizeof (UINT8);\r | |
1311 | Buffer = (UINT8*)Buffer + 1;\r | |
1312 | }\r | |
1313 | \r | |
1314 | if (StartAddress < EndAddress && (StartAddress & 2)) {\r | |
1315 | //\r | |
1316 | // Read a word if StartAddress is word aligned\r | |
1317 | //\r | |
1318 | *(UINT16*)Buffer = PciCf8Read16 (StartAddress);\r | |
1319 | StartAddress += sizeof (UINT16);\r | |
1320 | Buffer = (UINT16*)Buffer + 1;\r | |
1321 | }\r | |
1322 | \r | |
1323 | while (EndAddress - StartAddress >= 4) {\r | |
1324 | //\r | |
1325 | // Read as many double words as possible\r | |
1326 | //\r | |
1327 | *(UINT32*)Buffer = PciCf8Read32 (StartAddress);\r | |
1328 | StartAddress += sizeof (UINT32);\r | |
1329 | Buffer = (UINT32*)Buffer + 1;\r | |
1330 | }\r | |
1331 | \r | |
1332 | if ((EndAddress & 2) != 0) {\r | |
1333 | //\r | |
1334 | // Read the last remaining word if exist\r | |
1335 | //\r | |
1336 | *(UINT16*)Buffer = PciCf8Read16 (StartAddress);\r | |
1337 | StartAddress += sizeof (UINT16);\r | |
1338 | Buffer = (UINT16*)Buffer + 1;\r | |
1339 | }\r | |
1340 | \r | |
1341 | if (EndAddress & 1) {\r | |
1342 | //\r | |
1343 | // Read the last remaining byte if exist\r | |
1344 | //\r | |
1345 | *(UINT8*)Buffer = PciCf8Read8 (StartAddress);\r | |
1346 | }\r | |
1347 | \r | |
1348 | return Size;\r | |
1349 | }\r | |
1350 | \r | |
1351 | /**\r | |
1352 | Copies the data in a caller supplied buffer to a specified range of PCI\r | |
1353 | configuration space.\r | |
1354 | \r | |
1355 | Writes the range of PCI configuration registers specified by StartAddress and\r | |
1356 | Size from the buffer specified by Buffer. This function only allows the PCI\r | |
1357 | configuration registers from a single PCI function to be written. Size is\r | |
1358 | returned. When possible 32-bit PCI configuration write cycles are used to\r | |
1359 | write from StartAdress to StartAddress + Size. Due to alignment restrictions,\r | |
1360 | 8-bit and 16-bit PCI configuration write cycles may be used at the beginning\r | |
1361 | and the end of the range.\r | |
1362 | \r | |
1363 | If StartAddress > 0x0FFFFFFF, then ASSERT().\r | |
1364 | If the register specified by StartAddress >= 0x100, then ASSERT().\r | |
1365 | If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT().\r | |
1366 | If (StartAddress + Size - 1) > 0x0FFFFFFF, then ASSERT().\r | |
1367 | If Buffer is NULL, then ASSERT().\r | |
1368 | \r | |
1369 | @param StartAddress Starting address that encodes the PCI Bus, Device,\r | |
1370 | Function and Register.\r | |
1371 | @param Size Size in bytes of the transfer.\r | |
1372 | @param Buffer Pointer to a buffer containing the data to write.\r | |
1373 | \r | |
1374 | @return Size\r | |
1375 | \r | |
1376 | **/\r | |
1377 | UINTN\r | |
1378 | EFIAPI\r | |
1379 | PciCf8WriteBuffer (\r | |
1380 | IN UINTN StartAddress,\r | |
1381 | IN UINTN Size,\r | |
1382 | IN VOID *Buffer\r | |
1383 | )\r | |
1384 | {\r | |
1385 | UINTN EndAddress;\r | |
1386 | \r | |
1387 | EndAddress = StartAddress + Size;\r | |
1388 | \r | |
1389 | if ((StartAddress < EndAddress) && ((StartAddress & 1)!= 0)) {\r | |
1390 | //\r | |
1391 | // Write a byte if StartAddress is byte aligned\r | |
1392 | //\r | |
1393 | PciCf8Write8 (StartAddress, *(UINT8*)Buffer);\r | |
1394 | StartAddress += sizeof (UINT8);\r | |
1395 | Buffer = (UINT8*)Buffer + 1;\r | |
1396 | }\r | |
1397 | \r | |
1398 | if (StartAddress < EndAddress && (StartAddress & 2)) {\r | |
1399 | //\r | |
1400 | // Write a word if StartAddress is word aligned\r | |
1401 | //\r | |
1402 | PciCf8Write16 (StartAddress, *(UINT16*)Buffer);\r | |
1403 | StartAddress += sizeof (UINT16);\r | |
1404 | Buffer = (UINT16*)Buffer + 1;\r | |
1405 | }\r | |
1406 | \r | |
1407 | while (EndAddress - StartAddress >= 4) {\r | |
1408 | //\r | |
1409 | // Write as many double words as possible\r | |
1410 | //\r | |
1411 | PciCf8Write32 (StartAddress, *(UINT32*)Buffer);\r | |
1412 | StartAddress += sizeof (UINT32);\r | |
1413 | Buffer = (UINT32*)Buffer + 1;\r | |
1414 | }\r | |
1415 | \r | |
1416 | if (EndAddress & 2) {\r | |
1417 | //\r | |
1418 | // Write the last remaining word if exist\r | |
1419 | //\r | |
1420 | PciCf8Write16 (StartAddress, *(UINT16*)Buffer);\r | |
1421 | StartAddress += sizeof (UINT16);\r | |
1422 | Buffer = (UINT16*)Buffer + 1;\r | |
1423 | }\r | |
1424 | \r | |
1425 | if (EndAddress & 1) {\r | |
1426 | //\r | |
1427 | // Write the last remaining byte if exist\r | |
1428 | //\r | |
1429 | PciCf8Write8 (StartAddress, *(UINT8*)Buffer);\r | |
1430 | }\r | |
1431 | \r | |
1432 | return Size;\r | |
1433 | }\r |