]> git.proxmox.com Git - mirror_edk2.git/blob - ArmPkg/Drivers/CpuDxe/CpuDxe.c
ArmPkg: Fix typos in comments
[mirror_edk2.git] / ArmPkg / Drivers / CpuDxe / CpuDxe.c
1 /** @file
2
3 Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
4 Copyright (c) 2011, ARM Limited. All rights reserved.
5
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution. The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php
10
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
13
14 **/
15
16 #include "CpuDxe.h"
17
18 #include <Guid/IdleLoopEvent.h>
19
20
21 /**
22 This function flushes the range of addresses from Start to Start+Length
23 from the processor's data cache. If Start is not aligned to a cache line
24 boundary, then the bytes before Start to the preceding cache line boundary
25 are also flushed. If Start+Length is not aligned to a cache line boundary,
26 then the bytes past Start+Length to the end of the next cache line boundary
27 are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
28 supported. If the data cache is fully coherent with all DMA operations, then
29 this function can just return EFI_SUCCESS. If the processor does not support
30 flushing a range of the data cache, then the entire data cache can be flushed.
31
32 @param This The EFI_CPU_ARCH_PROTOCOL instance.
33 @param Start The beginning physical address to flush from the processor's data
34 cache.
35 @param Length The number of bytes to flush from the processor's data cache. This
36 function may flush more bytes than Length specifies depending upon
37 the granularity of the flush operation that the processor supports.
38 @param FlushType Specifies the type of flush operation to perform.
39
40 @retval EFI_SUCCESS The address range from Start to Start+Length was flushed from
41 the processor's data cache.
42 @retval EFI_UNSUPPORTED The processor does not support the cache flush type specified
43 by FlushType.
44 @retval EFI_DEVICE_ERROR The address range from Start to Start+Length could not be flushed
45 from the processor's data cache.
46
47 **/
48 EFI_STATUS
49 EFIAPI
50 CpuFlushCpuDataCache (
51 IN EFI_CPU_ARCH_PROTOCOL *This,
52 IN EFI_PHYSICAL_ADDRESS Start,
53 IN UINT64 Length,
54 IN EFI_CPU_FLUSH_TYPE FlushType
55 )
56 {
57
58 switch (FlushType) {
59 case EfiCpuFlushTypeWriteBack:
60 WriteBackDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
61 break;
62 case EfiCpuFlushTypeInvalidate:
63 InvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
64 break;
65 case EfiCpuFlushTypeWriteBackInvalidate:
66 WriteBackInvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
67 break;
68 default:
69 return EFI_INVALID_PARAMETER;
70 }
71
72 return EFI_SUCCESS;
73 }
74
75
76 /**
77 This function enables interrupt processing by the processor.
78
79 @param This The EFI_CPU_ARCH_PROTOCOL instance.
80
81 @retval EFI_SUCCESS Interrupts are enabled on the processor.
82 @retval EFI_DEVICE_ERROR Interrupts could not be enabled on the processor.
83
84 **/
85 EFI_STATUS
86 EFIAPI
87 CpuEnableInterrupt (
88 IN EFI_CPU_ARCH_PROTOCOL *This
89 )
90 {
91 ArmEnableInterrupts ();
92
93 return EFI_SUCCESS;
94 }
95
96
97 /**
98 This function disables interrupt processing by the processor.
99
100 @param This The EFI_CPU_ARCH_PROTOCOL instance.
101
102 @retval EFI_SUCCESS Interrupts are disabled on the processor.
103 @retval EFI_DEVICE_ERROR Interrupts could not be disabled on the processor.
104
105 **/
106 EFI_STATUS
107 EFIAPI
108 CpuDisableInterrupt (
109 IN EFI_CPU_ARCH_PROTOCOL *This
110 )
111 {
112 ArmDisableInterrupts ();
113
114 return EFI_SUCCESS;
115 }
116
117
118 /**
119 This function retrieves the processor's current interrupt state a returns it in
120 State. If interrupts are currently enabled, then TRUE is returned. If interrupts
121 are currently disabled, then FALSE is returned.
122
123 @param This The EFI_CPU_ARCH_PROTOCOL instance.
124 @param State A pointer to the processor's current interrupt state. Set to TRUE if
125 interrupts are enabled and FALSE if interrupts are disabled.
126
127 @retval EFI_SUCCESS The processor's current interrupt state was returned in State.
128 @retval EFI_INVALID_PARAMETER State is NULL.
129
130 **/
131 EFI_STATUS
132 EFIAPI
133 CpuGetInterruptState (
134 IN EFI_CPU_ARCH_PROTOCOL *This,
135 OUT BOOLEAN *State
136 )
137 {
138 if (State == NULL) {
139 return EFI_INVALID_PARAMETER;
140 }
141
142 *State = ArmGetInterruptState();
143 return EFI_SUCCESS;
144 }
145
146
147 /**
148 This function generates an INIT on the processor. If this function succeeds, then the
149 processor will be reset, and control will not be returned to the caller. If InitType is
150 not supported by this processor, or the processor cannot programmatically generate an
151 INIT without help from external hardware, then EFI_UNSUPPORTED is returned. If an error
152 occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
153
154 @param This The EFI_CPU_ARCH_PROTOCOL instance.
155 @param InitType The type of processor INIT to perform.
156
157 @retval EFI_SUCCESS The processor INIT was performed. This return code should never be seen.
158 @retval EFI_UNSUPPORTED The processor INIT operation specified by InitType is not supported
159 by this processor.
160 @retval EFI_DEVICE_ERROR The processor INIT failed.
161
162 **/
163 EFI_STATUS
164 EFIAPI
165 CpuInit (
166 IN EFI_CPU_ARCH_PROTOCOL *This,
167 IN EFI_CPU_INIT_TYPE InitType
168 )
169 {
170 return EFI_UNSUPPORTED;
171 }
172
173 EFI_STATUS
174 EFIAPI
175 CpuRegisterInterruptHandler (
176 IN EFI_CPU_ARCH_PROTOCOL *This,
177 IN EFI_EXCEPTION_TYPE InterruptType,
178 IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
179 )
180 {
181 return RegisterInterruptHandler (InterruptType, InterruptHandler);
182 }
183
184 EFI_STATUS
185 EFIAPI
186 CpuGetTimerValue (
187 IN EFI_CPU_ARCH_PROTOCOL *This,
188 IN UINT32 TimerIndex,
189 OUT UINT64 *TimerValue,
190 OUT UINT64 *TimerPeriod OPTIONAL
191 )
192 {
193 return EFI_UNSUPPORTED;
194 }
195
196 /**
197 Callback function for idle events.
198
199 @param Event Event whose notification function is being invoked.
200 @param Context The pointer to the notification function's context,
201 which is implementation-dependent.
202
203 **/
204 VOID
205 EFIAPI
206 IdleLoopEventCallback (
207 IN EFI_EVENT Event,
208 IN VOID *Context
209 )
210 {
211 CpuSleep ();
212 }
213
214 //
215 // Globals used to initialize the protocol
216 //
217 EFI_HANDLE mCpuHandle = NULL;
218 EFI_CPU_ARCH_PROTOCOL mCpu = {
219 CpuFlushCpuDataCache,
220 CpuEnableInterrupt,
221 CpuDisableInterrupt,
222 CpuGetInterruptState,
223 CpuInit,
224 CpuRegisterInterruptHandler,
225 CpuGetTimerValue,
226 CpuSetMemoryAttributes,
227 0, // NumberOfTimers
228 4, // DmaBufferAlignment
229 };
230
231 EFI_STATUS
232 CpuDxeInitialize (
233 IN EFI_HANDLE ImageHandle,
234 IN EFI_SYSTEM_TABLE *SystemTable
235 )
236 {
237 EFI_STATUS Status;
238 EFI_EVENT IdleLoopEvent;
239
240 InitializeExceptions (&mCpu);
241
242 Status = gBS->InstallMultipleProtocolInterfaces (
243 &mCpuHandle,
244 &gEfiCpuArchProtocolGuid, &mCpu,
245 &gVirtualUncachedPagesProtocolGuid, &gVirtualUncachedPages,
246 NULL
247 );
248
249 //
250 // Make sure GCD and MMU settings match. This API calls gDS->SetMemorySpaceAttributes ()
251 // and that calls EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes, so this code needs to go
252 // after the protocol is installed
253 //
254 SyncCacheConfig (&mCpu);
255
256 // If the platform is a MPCore system then install the Configuration Table describing the
257 // secondary core states
258 if (ArmIsMpCore()) {
259 PublishArmProcessorTable();
260 }
261
262 //
263 // Setup a callback for idle events
264 //
265 Status = gBS->CreateEventEx (
266 EVT_NOTIFY_SIGNAL,
267 TPL_NOTIFY,
268 IdleLoopEventCallback,
269 NULL,
270 &gIdleLoopEventGuid,
271 &IdleLoopEvent
272 );
273 ASSERT_EFI_ERROR (Status);
274
275 return Status;
276 }