ArmPlatformPkg/ArmPlatformPkg-2ndstage.fdf

   1 #
   2 #  Copyright (c) 2011, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.ArmPlatform_EFI]
  28 BaseAddress   = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  29 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0x200
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00200000
  53 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  54 FV = FVMAIN_COMPACT
  55
  56
  57 ################################################################################
  58 #
  59 # FV Section
  60 #
  61 # [FV] section is used to define what components or modules are placed within a flash
  62 # device file.  This section also defines order the components and modules are positioned
  63 # within the image.  The [FV] section consists of define statements, set statements and
  64 # module statements.
  65 #
  66 ################################################################################
  67
  68 [FV.FvMain]
  69 BlockSize          = 0x40
  70 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  71 FvAlignment        = 8         # FV alignment and FV attributes setting.
  72 ERASE_POLARITY     = 1
  73 MEMORY_MAPPED      = TRUE
  74 STICKY_WRITE       = TRUE
  75 LOCK_CAP           = TRUE
  76 LOCK_STATUS        = TRUE
  77 WRITE_DISABLED_CAP = TRUE
  78 WRITE_ENABLED_CAP  = TRUE
  79 WRITE_STATUS       = TRUE
  80 WRITE_LOCK_CAP     = TRUE
  81 WRITE_LOCK_STATUS  = TRUE
  82 READ_DISABLED_CAP  = TRUE
  83 READ_ENABLED_CAP   = TRUE
  84 READ_STATUS        = TRUE
  85 READ_LOCK_CAP      = TRUE
  86 READ_LOCK_STATUS   = TRUE
  87
  88   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  89
  90   #
  91   # PI DXE Drivers producing Architectural Protocols (EFI Services)
  92   #
  93   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  94   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  95   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  96   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
  97   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  98   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
  99   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 100   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 101   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 102   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 103
 104   # Simple TextIn/TextOut for UEFI Terminal
 105   INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
 106
 107   #
 108   # Semi-hosting filesystem (Required the Hardware Debugger to be connected)
 109   #
 110   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 111
 112   #
 113   # FAT filesystem + GPT/MBR partitioning
 114   #
 115   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 116   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 117   INF FatPkg/EnhancedFatDxe/Fat.inf
 118   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 119
 120   #
 121   # UEFI application (Shell Embedded Boot Loader)
 122   #
 123   INF EmbeddedPkg/Ebl/Ebl.inf
 124
 125   #
 126   # Bds
 127   #
 128   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 129   INF ArmPlatformPkg/Bds/Bds.inf
 130
 131
 132 [FV.FVMAIN_COMPACT]
 133 FvAlignment        = 8
 134 ERASE_POLARITY     = 1
 135 MEMORY_MAPPED      = TRUE
 136 STICKY_WRITE       = TRUE
 137 LOCK_CAP           = TRUE
 138 LOCK_STATUS        = TRUE
 139 WRITE_DISABLED_CAP = TRUE
 140 WRITE_ENABLED_CAP  = TRUE
 141 WRITE_STATUS       = TRUE
 142 WRITE_LOCK_CAP     = TRUE
 143 WRITE_LOCK_STATUS  = TRUE
 144 READ_DISABLED_CAP  = TRUE
 145 READ_ENABLED_CAP   = TRUE
 146 READ_STATUS        = TRUE
 147 READ_LOCK_CAP      = TRUE
 148 READ_LOCK_STATUS   = TRUE
 149
 150   INF ArmPlatformPkg/PrePi/PeiUniCore.inf
 151
 152   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 153     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 154       SECTION FV_IMAGE = FVMAIN
 155     }
 156   }
 157
 158
 159 ################################################################################
 160 #
 161 # Rules are use with the [FV] section's module INF type to define
 162 # how an FFS file is created for a given INF file. The following Rule are the default
 163 # rules for the different module type. User can add the customized rules to define the
 164 # content of the FFS file.
 165 #
 166 ################################################################################
 167
 168
 169 ############################################################################
 170 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 171 ############################################################################
 172 #
 173 #[Rule.Common.DXE_DRIVER]
 174 #  FILE DRIVER = $(NAMED_GUID) {
 175 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 176 #    COMPRESS PI_STD {
 177 #      GUIDED {
 178 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 179 #        UI       STRING="$(MODULE_NAME)" Optional
 180 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 181 #      }
 182 #    }
 183 #  }
 184 #
 185 ############################################################################
 186
 187 [Rule.Common.SEC]
 188   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 189     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 190   }
 191
 192 [Rule.Common.PEI_CORE]
 193   FILE PEI_CORE = $(NAMED_GUID) {
 194     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 195     UI     STRING ="$(MODULE_NAME)" Optional
 196   }
 197
 198 [Rule.Common.PEIM]
 199   FILE PEIM = $(NAMED_GUID) {
 200      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 201      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 202      UI       STRING="$(MODULE_NAME)" Optional
 203   }
 204
 205 [Rule.Common.PEIM.TIANOCOMPRESSED]
 206   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 207     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 208     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 209       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 210       UI        STRING="$(MODULE_NAME)" Optional
 211     }
 212   }
 213
 214 [Rule.Common.DXE_CORE]
 215   FILE DXE_CORE = $(NAMED_GUID) {
 216     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 217     UI       STRING="$(MODULE_NAME)" Optional
 218   }
 219
 220 [Rule.Common.UEFI_DRIVER]
 221   FILE DRIVER = $(NAMED_GUID) {
 222     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 223     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 224     UI           STRING="$(MODULE_NAME)" Optional
 225   }
 226
 227 [Rule.Common.DXE_DRIVER]
 228   FILE DRIVER = $(NAMED_GUID) {
 229     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 230     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 231     UI           STRING="$(MODULE_NAME)" Optional
 232   }
 233
 234 [Rule.Common.DXE_RUNTIME_DRIVER]
 235   FILE DRIVER = $(NAMED_GUID) {
 236     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 237     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 238     UI           STRING="$(MODULE_NAME)" Optional
 239   }
 240
 241 [Rule.Common.UEFI_APPLICATION]
 242   FILE APPLICATION = $(NAMED_GUID) {
 243     UI     STRING ="$(MODULE_NAME)" Optional
 244     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 245   }