ArmPlatformPkg/ArmPlatformPkg.fdf

   1 #
   2 #  Copyright (c) 2011-2013, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.Sec_ArmPlatform_EFI]
  28 BaseAddress   = 0xEC000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.
  29 Size          = 0x00020000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device
  30 ErasePolarity = 1
  31 BlockSize     = 0x00002000
  32 NumBlocks     = 0x10
  33
  34 ################################################################################
  35 #
  36 # Following are lists of FD Region layout which correspond to the locations of different
  37 # images within the flash device.
  38 #
  39 # Regions must be defined in ascending order and may not overlap.
  40 #
  41 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  42 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  43 # "0x" characters. Like:
  44 # Offset|Size
  45 # PcdOffsetCName|PcdSizeCName
  46 # RegionType <FV, DATA, or FILE>
  47 #
  48 ################################################################################
  49
  50 0x00000000|0x00020000
  51 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  52 FV = FVMAIN_SEC
  53
  54
  55 [FD.ArmPlatform_EFI]
  56 BaseAddress   = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  57 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  58 ErasePolarity = 1
  59
  60 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  61 BlockSize     = 0x00001000
  62 NumBlocks     = 0x200
  63
  64 ################################################################################
  65 #
  66 # Following are lists of FD Region layout which correspond to the locations of different
  67 # images within the flash device.
  68 #
  69 # Regions must be defined in ascending order and may not overlap.
  70 #
  71 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  72 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  73 # "0x" characters. Like:
  74 # Offset|Size
  75 # PcdOffsetCName|PcdSizeCName
  76 # RegionType <FV, DATA, or FILE>
  77 #
  78 ################################################################################
  79
  80 0x00000000|0x00200000
  81 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  82 FV = FVMAIN_COMPACT
  83
  84
  85 ################################################################################
  86 #
  87 # FV Section
  88 #
  89 # [FV] section is used to define what components or modules are placed within a flash
  90 # device file.  This section also defines order the components and modules are positioned
  91 # within the image.  The [FV] section consists of define statements, set statements and
  92 # module statements.
  93 #
  94 ################################################################################
  95
  96 [FV.FVMAIN_SEC]
  97 FvAlignment        = 8
  98 ERASE_POLARITY     = 1
  99 MEMORY_MAPPED      = TRUE
 100 STICKY_WRITE       = TRUE
 101 LOCK_CAP           = TRUE
 102 LOCK_STATUS        = TRUE
 103 WRITE_DISABLED_CAP = TRUE
 104 WRITE_ENABLED_CAP  = TRUE
 105 WRITE_STATUS       = TRUE
 106 WRITE_LOCK_CAP     = TRUE
 107 WRITE_LOCK_STATUS  = TRUE
 108 READ_DISABLED_CAP  = TRUE
 109 READ_ENABLED_CAP   = TRUE
 110 READ_STATUS        = TRUE
 111 READ_LOCK_CAP      = TRUE
 112 READ_LOCK_STATUS   = TRUE
 113
 114   INF ArmPlatformPkg/Sec/Sec.inf
 115
 116
 117 [FV.FvMain]
 118 BlockSize          = 0x40
 119 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 120 FvAlignment        = 8         # FV alignment and FV attributes setting.
 121 ERASE_POLARITY     = 1
 122 MEMORY_MAPPED      = TRUE
 123 STICKY_WRITE       = TRUE
 124 LOCK_CAP           = TRUE
 125 LOCK_STATUS        = TRUE
 126 WRITE_DISABLED_CAP = TRUE
 127 WRITE_ENABLED_CAP  = TRUE
 128 WRITE_STATUS       = TRUE
 129 WRITE_LOCK_CAP     = TRUE
 130 WRITE_LOCK_STATUS  = TRUE
 131 READ_DISABLED_CAP  = TRUE
 132 READ_ENABLED_CAP   = TRUE
 133 READ_STATUS        = TRUE
 134 READ_LOCK_CAP      = TRUE
 135 READ_LOCK_STATUS   = TRUE
 136
 137   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 138
 139   #
 140   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 141   #
 142   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 143   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 144   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 145   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 146   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 147   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 148   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 149   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 150   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 151   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 152
 153   # Simple TextIn/TextOut for UEFI Terminal
 154   INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
 155
 156   #
 157   # Semi-hosting filesystem (Required the Hardware Debugger to be connected)
 158   #
 159   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 160
 161   #
 162   # FAT filesystem + GPT/MBR partitioning
 163   #
 164   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 165   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 166   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 167   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 168
 169   #
 170   # UEFI application (Shell Embedded Boot Loader)
 171   #
 172   INF EmbeddedPkg/Ebl/Ebl.inf
 173
 174   #
 175   # Bds
 176   #
 177   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 178   INF ArmPlatformPkg/Bds/Bds.inf
 179
 180
 181 [FV.FVMAIN_COMPACT]
 182 FvAlignment        = 8
 183 ERASE_POLARITY     = 1
 184 MEMORY_MAPPED      = TRUE
 185 STICKY_WRITE       = TRUE
 186 LOCK_CAP           = TRUE
 187 LOCK_STATUS        = TRUE
 188 WRITE_DISABLED_CAP = TRUE
 189 WRITE_ENABLED_CAP  = TRUE
 190 WRITE_STATUS       = TRUE
 191 WRITE_LOCK_CAP     = TRUE
 192 WRITE_LOCK_STATUS  = TRUE
 193 READ_DISABLED_CAP  = TRUE
 194 READ_ENABLED_CAP   = TRUE
 195 READ_STATUS        = TRUE
 196 READ_LOCK_CAP      = TRUE
 197 READ_LOCK_STATUS   = TRUE
 198
 199   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
 200   INF MdeModulePkg/Core/Pei/PeiMain.inf
 201   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 202   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 203   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 204   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 205   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 206   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 207   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 208
 209   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 210     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 211       SECTION FV_IMAGE = FVMAIN
 212     }
 213   }
 214
 215
 216 ################################################################################
 217 #
 218 # Rules are use with the [FV] section's module INF type to define
 219 # how an FFS file is created for a given INF file. The following Rule are the default
 220 # rules for the different module type. User can add the customized rules to define the
 221 # content of the FFS file.
 222 #
 223 ################################################################################
 224
 225
 226 ############################################################################
 227 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 228 ############################################################################
 229 #
 230 #[Rule.Common.DXE_DRIVER]
 231 #  FILE DRIVER = $(NAMED_GUID) {
 232 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 233 #    COMPRESS PI_STD {
 234 #      GUIDED {
 235 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 236 #        UI       STRING="$(MODULE_NAME)" Optional
 237 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 238 #      }
 239 #    }
 240 #  }
 241 #
 242 ############################################################################
 243
 244 [Rule.Common.SEC]
 245   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 246     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 247   }
 248
 249 [Rule.Common.PEI_CORE]
 250   FILE PEI_CORE = $(NAMED_GUID) {
 251     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 252     UI     STRING ="$(MODULE_NAME)" Optional
 253   }
 254
 255 [Rule.Common.PEIM]
 256   FILE PEIM = $(NAMED_GUID) {
 257      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 258      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 259      UI       STRING="$(MODULE_NAME)" Optional
 260   }
 261
 262 [Rule.Common.PEIM.TIANOCOMPRESSED]
 263   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 264     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 265     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 266       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 267       UI        STRING="$(MODULE_NAME)" Optional
 268     }
 269   }
 270
 271 [Rule.Common.DXE_CORE]
 272   FILE DXE_CORE = $(NAMED_GUID) {
 273     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 274     UI       STRING="$(MODULE_NAME)" Optional
 275   }
 276
 277 [Rule.Common.UEFI_DRIVER]
 278   FILE DRIVER = $(NAMED_GUID) {
 279     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 280     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 281     UI           STRING="$(MODULE_NAME)" Optional
 282   }
 283
 284 [Rule.Common.UEFI_DRIVER.BINARY]
 285   FILE DRIVER = $(NAMED_GUID) {
 286     DXE_DEPEX DXE_DEPEX Optional      |.depex
 287     PE32      PE32                    |.efi
 288     UI        STRING="$(MODULE_NAME)" Optional
 289     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 290   }
 291
 292 [Rule.Common.DXE_DRIVER]
 293   FILE DRIVER = $(NAMED_GUID) {
 294     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 295     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 296     UI           STRING="$(MODULE_NAME)" Optional
 297   }
 298
 299 [Rule.Common.DXE_RUNTIME_DRIVER]
 300   FILE DRIVER = $(NAMED_GUID) {
 301     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 302     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 303     UI           STRING="$(MODULE_NAME)" Optional
 304   }
 305
 306 [Rule.Common.UEFI_APPLICATION]
 307   FILE APPLICATION = $(NAMED_GUID) {
 308     UI     STRING ="$(MODULE_NAME)" Optional
 309     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 310   }