ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-MPCore.fdf

   1 # FLASH layout file for ARM VE.
   2 #
   3 #  Copyright (c) 2011, ARM Limited. All rights reserved.
   4 #
   5 #  This program and the accompanying materials
   6 #  are licensed and made available under the terms and conditions of the BSD License
   7 #  which accompanies this distribution.  The full text of the license may be found at
   8 #  http://opensource.org/licenses/bsd-license.php
   9 #
  10 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28
  29 [FD.ArmRealViewEb_EFI]
  30 BaseAddress   = 0x40000000  # The base address of the FLASH Device.
  31 Size          = 0x00200000  # The size in bytes of the FLASH Device
  32 ErasePolarity = 1
  33 BlockSize     = 0x00010000
  34 NumBlocks     = 0x20
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00050000
  53 gEmbeddedTokenSpaceGuid.PcdFlashFvSecBase|gEmbeddedTokenSpaceGuid.PcdFlashFvSecSize
  54 FV = FVMAIN_SEC
  55
  56 0x00050000|0x00100000
  57 gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize
  58 FV = FVMAIN_COMPACT
  59
  60 ################################################################################
  61 #
  62 # FV Section
  63 #
  64 # [FV] section is used to define what components or modules are placed within a flash
  65 # device file.  This section also defines order the components and modules are positioned
  66 # within the image.  The [FV] section consists of define statements, set statements and
  67 # module statements.
  68 #
  69 ################################################################################
  70
  71 [FV.FVMAIN_SEC]
  72 FvAlignment        = 8
  73 ERASE_POLARITY     = 1
  74 MEMORY_MAPPED      = TRUE
  75 STICKY_WRITE       = TRUE
  76 LOCK_CAP           = TRUE
  77 LOCK_STATUS        = TRUE
  78 WRITE_DISABLED_CAP = TRUE
  79 WRITE_ENABLED_CAP  = TRUE
  80 WRITE_STATUS       = TRUE
  81 WRITE_LOCK_CAP     = TRUE
  82 WRITE_LOCK_STATUS  = TRUE
  83 READ_DISABLED_CAP  = TRUE
  84 READ_ENABLED_CAP   = TRUE
  85 READ_STATUS        = TRUE
  86 READ_LOCK_CAP      = TRUE
  87 READ_LOCK_STATUS   = TRUE
  88
  89   INF ArmPlatformPkg/Sec/Sec.inf
  90
  91
  92 [FV.FvMain]
  93 BlockSize          = 0x40
  94 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  95 FvAlignment        = 8         # FV alignment and FV attributes setting.
  96 ERASE_POLARITY     = 1
  97 MEMORY_MAPPED      = TRUE
  98 STICKY_WRITE       = TRUE
  99 LOCK_CAP           = TRUE
 100 LOCK_STATUS        = TRUE
 101 WRITE_DISABLED_CAP = TRUE
 102 WRITE_ENABLED_CAP  = TRUE
 103 WRITE_STATUS       = TRUE
 104 WRITE_LOCK_CAP     = TRUE
 105 WRITE_LOCK_STATUS  = TRUE
 106 READ_DISABLED_CAP  = TRUE
 107 READ_ENABLED_CAP   = TRUE
 108 READ_STATUS        = TRUE
 109 READ_LOCK_CAP      = TRUE
 110 READ_LOCK_STATUS   = TRUE
 111
 112   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 113
 114   #
 115   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 116   #
 117   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 118   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 119   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 120   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 121   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 122   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 123   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 124   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 125   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 126   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 127   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 128
 129   INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
 130
 131   INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
 132   INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
 133
 134   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 135
 136   #
 137   # Semi-hosting filesystem
 138   #
 139   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 140
 141   #
 142   # FAT filesystem + GPT/MBR partitioning
 143   #
 144   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 145   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 146   INF FatPkg/EnhancedFatDxe/Fat.inf
 147   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 148
 149   #
 150   # UEFI application (Shell Embedded Boot Loader)
 151   #
 152   INF EmbeddedPkg/Ebl/Ebl.inf
 153
 154
 155   #
 156   # Bds
 157   #
 158   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 159   INF ArmPlatformPkg/Bds/Bds.inf
 160
 161
 162 [FV.FVMAIN_COMPACT]
 163 FvAlignment        = 8
 164 ERASE_POLARITY     = 1
 165 MEMORY_MAPPED      = TRUE
 166 STICKY_WRITE       = TRUE
 167 LOCK_CAP           = TRUE
 168 LOCK_STATUS        = TRUE
 169 WRITE_DISABLED_CAP = TRUE
 170 WRITE_ENABLED_CAP  = TRUE
 171 WRITE_STATUS       = TRUE
 172 WRITE_LOCK_CAP     = TRUE
 173 WRITE_LOCK_STATUS  = TRUE
 174 READ_DISABLED_CAP  = TRUE
 175 READ_ENABLED_CAP   = TRUE
 176 READ_STATUS        = TRUE
 177 READ_LOCK_CAP      = TRUE
 178 READ_LOCK_STATUS   = TRUE
 179
 180   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 181   INF MdeModulePkg/Core/Pei/PeiMain.inf
 182   INF ArmPlatformPkg/PlatformPei/PlatformPei.inf
 183   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPei.inf
 184   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 185   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 186   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 187   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 188
 189   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 190     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 191       SECTION FV_IMAGE = FVMAIN
 192     }
 193   }
 194
 195
 196 ################################################################################
 197 #
 198 # Rules are use with the [FV] section's module INF type to define
 199 # how an FFS file is created for a given INF file. The following Rule are the default
 200 # rules for the different module type. User can add the customized rules to define the
 201 # content of the FFS file.
 202 #
 203 ################################################################################
 204
 205
 206 ############################################################################
 207 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 208 ############################################################################
 209 #
 210 #[Rule.Common.DXE_DRIVER]
 211 #  FILE DRIVER = $(NAMED_GUID) {
 212 #    DXE_DEPEX    DXE_DEPEX Optional      |.depex
 213 #    COMPRESS PI_STD {
 214 #      GUIDED {
 215 #        PE32     PE32                    |.efi
 216 #        UI       STRING="$(MODULE_NAME)" Optional
 217 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 218 #      }
 219 #    }
 220 #  }
 221 #
 222 ############################################################################
 223
 224 [Rule.Common.SEC]
 225   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 226     TE  TE    Align = 32      |.efi
 227   }
 228
 229 [Rule.Common.PEI_CORE]
 230   FILE PEI_CORE = $(NAMED_GUID) {
 231     TE     TE           |.efi
 232     UI     STRING ="$(MODULE_NAME)" Optional
 233   }
 234
 235 [Rule.Common.PEIM]
 236   FILE PEIM = $(NAMED_GUID) {
 237      PEI_DEPEX PEI_DEPEX Optional        |.depex
 238      TE       TE                         |.efi
 239      UI       STRING="$(MODULE_NAME)" Optional
 240   }
 241
 242 [Rule.Common.PEIM.TIANOCOMPRESSED]
 243   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 244     PEI_DEPEX PEI_DEPEX Optional         |.depex
 245     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 246       PE32      PE32                     |.efi
 247       UI        STRING="$(MODULE_NAME)" Optional
 248     }
 249   }
 250
 251 [Rule.Common.DXE_CORE]
 252   FILE DXE_CORE = $(NAMED_GUID) {
 253     PE32     PE32           |.efi
 254     UI       STRING="$(MODULE_NAME)" Optional
 255   }
 256
 257 [Rule.Common.UEFI_DRIVER]
 258   FILE DRIVER = $(NAMED_GUID) {
 259     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 260     PE32         PE32                    |.efi
 261     UI           STRING="$(MODULE_NAME)" Optional
 262   }
 263
 264 [Rule.Common.DXE_DRIVER]
 265   FILE DRIVER = $(NAMED_GUID) {
 266     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 267     PE32         PE32                    |.efi
 268     UI           STRING="$(MODULE_NAME)" Optional
 269   }
 270
 271 [Rule.Common.DXE_RUNTIME_DRIVER]
 272   FILE DRIVER = $(NAMED_GUID) {
 273     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 274     PE32         PE32                    |.efi
 275     UI           STRING="$(MODULE_NAME)" Optional
 276   }
 277
 278 [Rule.Common.UEFI_APPLICATION]
 279   FILE APPLICATION = $(NAMED_GUID) {
 280     UI     STRING ="$(MODULE_NAME)" Optional
 281     PE32   PE32                    |.efi
 282   }