ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-CTA9x4.fdf

   1 # FLASH layout file for ARM VE.
   2 #
   3 #  Copyright (c) 2011, ARM Limited. All rights reserved.
   4 #
   5 #  This program and the accompanying materials
   6 #  are licensed and made available under the terms and conditions of the BSD License
   7 #  which accompanies this distribution.  The full text of the license may be found at
   8 #  http://opensource.org/licenses/bsd-license.php
   9 #
  10 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28 [FD.Sec_ArmVExpress_EFI]
  29 BaseAddress   = 0x44000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.
  30 Size          = 0x00200000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device
  31 ErasePolarity = 1
  32 BlockSize     = 0x00001000
  33 NumBlocks     = 0x200
  34
  35 ################################################################################
  36 #
  37 # Following are lists of FD Region layout which correspond to the locations of different
  38 # images within the flash device.
  39 #
  40 # Regions must be defined in ascending order and may not overlap.
  41 #
  42 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  43 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  44 # "0x" characters. Like:
  45 # Offset|Size
  46 # PcdOffsetCName|PcdSizeCName
  47 # RegionType <FV, DATA, or FILE>
  48 #
  49 ################################################################################
  50
  51 0x00000000|0x00200000
  52 gEmbeddedTokenSpaceGuid.PcdFlashFvSecBase|gEmbeddedTokenSpaceGuid.PcdFlashFvSecSize
  53 FV = FVMAIN_SEC
  54
  55
  56 [FD.ArmVExpress_EFI]
  57 !if $(EDK2_ARMVE_STANDALONE) == 1
  58 BaseAddress   = 0x45000000|gArmTokenSpaceGuid.PcdNormalFdBaseAddress  # The base address of the Firmware in NOR Flash.
  59 !else
  60 BaseAddress   = 0x80000000|gArmTokenSpaceGuid.PcdNormalFdBaseAddress  # The base address of the Firmware in remapped DRAM.
  61 !endif
  62 Size          = 0x00200000|gArmTokenSpaceGuid.PcdNormalFdSize         # The size in bytes of the FLASH Device
  63 ErasePolarity = 1
  64
  65 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  66 BlockSize     = 0x00001000
  67 NumBlocks     = 0x200
  68
  69 ################################################################################
  70 #
  71 # Following are lists of FD Region layout which correspond to the locations of different
  72 # images within the flash device.
  73 #
  74 # Regions must be defined in ascending order and may not overlap.
  75 #
  76 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  77 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  78 # "0x" characters. Like:
  79 # Offset|Size
  80 # PcdOffsetCName|PcdSizeCName
  81 # RegionType <FV, DATA, or FILE>
  82 #
  83 ################################################################################
  84
  85 0x00000000|0x00200000
  86 gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize
  87 FV = FVMAIN_COMPACT
  88
  89
  90 ################################################################################
  91 #
  92 # FV Section
  93 #
  94 # [FV] section is used to define what components or modules are placed within a flash
  95 # device file.  This section also defines order the components and modules are positioned
  96 # within the image.  The [FV] section consists of define statements, set statements and
  97 # module statements.
  98 #
  99 ################################################################################
 100
 101 [FV.FVMAIN_SEC]
 102 FvAlignment        = 8
 103 ERASE_POLARITY     = 1
 104 MEMORY_MAPPED      = TRUE
 105 STICKY_WRITE       = TRUE
 106 LOCK_CAP           = TRUE
 107 LOCK_STATUS        = TRUE
 108 WRITE_DISABLED_CAP = TRUE
 109 WRITE_ENABLED_CAP  = TRUE
 110 WRITE_STATUS       = TRUE
 111 WRITE_LOCK_CAP     = TRUE
 112 WRITE_LOCK_STATUS  = TRUE
 113 READ_DISABLED_CAP  = TRUE
 114 READ_ENABLED_CAP   = TRUE
 115 READ_STATUS        = TRUE
 116 READ_LOCK_CAP      = TRUE
 117 READ_LOCK_STATUS   = TRUE
 118
 119   INF ArmPlatformPkg/Sec/Sec.inf
 120
 121
 122 [FV.FvMain]
 123 BlockSize          = 0x40
 124 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 125 FvAlignment        = 8         # FV alignment and FV attributes setting.
 126 ERASE_POLARITY     = 1
 127 MEMORY_MAPPED      = TRUE
 128 STICKY_WRITE       = TRUE
 129 LOCK_CAP           = TRUE
 130 LOCK_STATUS        = TRUE
 131 WRITE_DISABLED_CAP = TRUE
 132 WRITE_ENABLED_CAP  = TRUE
 133 WRITE_STATUS       = TRUE
 134 WRITE_LOCK_CAP     = TRUE
 135 WRITE_LOCK_STATUS  = TRUE
 136 READ_DISABLED_CAP  = TRUE
 137 READ_ENABLED_CAP   = TRUE
 138 READ_STATUS        = TRUE
 139 READ_LOCK_CAP      = TRUE
 140 READ_LOCK_STATUS   = TRUE
 141
 142   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 143
 144   #
 145   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 146   #
 147   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 148   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 149   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 150   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 151   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 152   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 153   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 154   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 155   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 156   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 157   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 158
 159   INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
 160
 161   INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
 162   INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
 163   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 164
 165   #
 166   # Semi-hosting filesystem
 167   #
 168   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 169
 170   #
 171   # FAT filesystem + GPT/MBR partitioning
 172   #
 173   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 174   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 175   INF FatPkg/EnhancedFatDxe/Fat.inf
 176   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 177
 178   #
 179   # Multimedia Card Interface
 180   #
 181   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 182   INF ArmPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 183
 184   #
 185   # UEFI application (Shell Embedded Boot Loader)
 186   #
 187   INF EmbeddedPkg/Ebl/Ebl.inf
 188
 189   #
 190   # Bds
 191   #
 192   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 193   INF ArmPlatformPkg/Bds/Bds.inf
 194
 195
 196 [FV.FVMAIN_COMPACT]
 197 FvAlignment        = 8
 198 ERASE_POLARITY     = 1
 199 MEMORY_MAPPED      = TRUE
 200 STICKY_WRITE       = TRUE
 201 LOCK_CAP           = TRUE
 202 LOCK_STATUS        = TRUE
 203 WRITE_DISABLED_CAP = TRUE
 204 WRITE_ENABLED_CAP  = TRUE
 205 WRITE_STATUS       = TRUE
 206 WRITE_LOCK_CAP     = TRUE
 207 WRITE_LOCK_STATUS  = TRUE
 208 READ_DISABLED_CAP  = TRUE
 209 READ_ENABLED_CAP   = TRUE
 210 READ_STATUS        = TRUE
 211 READ_LOCK_CAP      = TRUE
 212 READ_LOCK_STATUS   = TRUE
 213
 214   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 215   INF MdeModulePkg/Core/Pei/PeiMain.inf
 216   INF ArmPlatformPkg/PlatformPei/PlatformPei.inf
 217   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPei.inf
 218   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 219   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 220   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 221   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 222
 223   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 224     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 225       SECTION FV_IMAGE = FVMAIN
 226     }
 227   }
 228
 229
 230 ################################################################################
 231 #
 232 # Rules are use with the [FV] section's module INF type to define
 233 # how an FFS file is created for a given INF file. The following Rule are the default
 234 # rules for the different module type. User can add the customized rules to define the
 235 # content of the FFS file.
 236 #
 237 ################################################################################
 238
 239
 240 ############################################################################
 241 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 242 ############################################################################
 243 #
 244 #[Rule.Common.DXE_DRIVER]
 245 #  FILE DRIVER = $(NAMED_GUID) {
 246 #    DXE_DEPEX    DXE_DEPEX Optional      |.depex
 247 #    COMPRESS PI_STD {
 248 #      GUIDED {
 249 #        PE32     PE32                    |.efi
 250 #        UI       STRING="$(MODULE_NAME)" Optional
 251 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 252 #      }
 253 #    }
 254 #  }
 255 #
 256 ############################################################################
 257
 258 [Rule.Common.SEC]
 259   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 260     TE  TE    Align = 32      |.efi
 261   }
 262
 263 [Rule.Common.PEI_CORE]
 264   FILE PEI_CORE = $(NAMED_GUID) {
 265     TE     TE           |.efi
 266     UI     STRING ="$(MODULE_NAME)" Optional
 267   }
 268
 269 [Rule.Common.PEIM]
 270   FILE PEIM = $(NAMED_GUID) {
 271      PEI_DEPEX PEI_DEPEX Optional        |.depex
 272      TE       TE                         |.efi
 273      UI       STRING="$(MODULE_NAME)" Optional
 274   }
 275
 276 [Rule.Common.PEIM.TIANOCOMPRESSED]
 277   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 278     PEI_DEPEX PEI_DEPEX Optional         |.depex
 279     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 280       PE32      PE32                     |.efi
 281       UI        STRING="$(MODULE_NAME)" Optional
 282     }
 283   }
 284
 285 [Rule.Common.DXE_CORE]
 286   FILE DXE_CORE = $(NAMED_GUID) {
 287     PE32     PE32           |.efi
 288     UI       STRING="$(MODULE_NAME)" Optional
 289   }
 290
 291 [Rule.Common.UEFI_DRIVER]
 292   FILE DRIVER = $(NAMED_GUID) {
 293     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 294     PE32         PE32                    |.efi
 295     UI           STRING="$(MODULE_NAME)" Optional
 296   }
 297
 298 [Rule.Common.DXE_DRIVER]
 299   FILE DRIVER = $(NAMED_GUID) {
 300     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 301     PE32         PE32                    |.efi
 302     UI           STRING="$(MODULE_NAME)" Optional
 303   }
 304
 305 [Rule.Common.DXE_RUNTIME_DRIVER]
 306   FILE DRIVER = $(NAMED_GUID) {
 307     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 308     PE32         PE32                    |.efi
 309     UI           STRING="$(MODULE_NAME)" Optional
 310   }
 311
 312 [Rule.Common.UEFI_APPLICATION]
 313   FILE APPLICATION = $(NAMED_GUID) {
 314     UI     STRING ="$(MODULE_NAME)" Optional
 315     PE32   PE32                    |.efi
 316   }