ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationXen.fdf

   1 #
   2 #  Copyright (c) 2011, 2013, ARM Limited. All rights reserved.
   3 #  Copyright (c) 2014, Linaro Limited. All rights reserved.
   4 #
   5 #  This program and the accompanying materials
   6 #  are licensed and made available under the terms and conditions of the BSD License
   7 #  which accompanies this distribution.  The full text of the license may be found at
   8 #  http://opensource.org/licenses/bsd-license.php
   9 #
  10 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28 [FD.XEN_EFI]
  29 BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
  30 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
  31 ErasePolarity = 1
  32
  33 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  34 BlockSize     = 0x00001000
  35 NumBlocks     = 0x200
  36
  37 ################################################################################
  38 #
  39 # Following are lists of FD Region layout which correspond to the locations of different
  40 # images within the flash device.
  41 #
  42 # Regions must be defined in ascending order and may not overlap.
  43 #
  44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  46 # "0x" characters. Like:
  47 # Offset|Size
  48 # PcdOffsetCName|PcdSizeCName
  49 # RegionType <FV, DATA, or FILE>
  50 #
  51 ################################################################################
  52
  53 #
  54 # Implement the Linux kernel header layout so that the Xen loader will identify
  55 # it as something bootable, and execute it with a FDT pointer in x0. This area
  56 # will be reused to store a copy of the FDT so round it up to 8 KB.
  57 #
  58 0x00000000|0x00002000
  59 DATA = {
  60   0x01, 0x00, 0x00, 0x10,                         # code0: adr x1, .
  61   0xff, 0x07, 0x00, 0x14,                         # code1: b 0x2000
  62   0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
  63   0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
  64   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
  65   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
  66   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
  67   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res4
  68   0x41, 0x52, 0x4d, 0x64,                         # magic: "ARM\x64"
  69   0x00, 0x00, 0x00, 0x00                          # res5
  70 }
  71
  72 0x00002000|0x001fe000
  73 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  74 FV = FVMAIN_COMPACT
  75
  76
  77 ################################################################################
  78 #
  79 # FV Section
  80 #
  81 # [FV] section is used to define what components or modules are placed within a flash
  82 # device file.  This section also defines order the components and modules are positioned
  83 # within the image.  The [FV] section consists of define statements, set statements and
  84 # module statements.
  85 #
  86 ################################################################################
  87
  88 [FV.FvMain]
  89 BlockSize          = 0x40
  90 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  91 FvAlignment        = 16        # FV alignment and FV attributes setting.
  92 ERASE_POLARITY     = 1
  93 MEMORY_MAPPED      = TRUE
  94 STICKY_WRITE       = TRUE
  95 LOCK_CAP           = TRUE
  96 LOCK_STATUS        = TRUE
  97 WRITE_DISABLED_CAP = TRUE
  98 WRITE_ENABLED_CAP  = TRUE
  99 WRITE_STATUS       = TRUE
 100 WRITE_LOCK_CAP     = TRUE
 101 WRITE_LOCK_STATUS  = TRUE
 102 READ_DISABLED_CAP  = TRUE
 103 READ_ENABLED_CAP   = TRUE
 104 READ_STATUS        = TRUE
 105 READ_LOCK_CAP      = TRUE
 106 READ_LOCK_STATUS   = TRUE
 107
 108   APRIORI DXE {
 109     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 110     INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
 111   }
 112   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 113   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 114   INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
 115
 116   #
 117   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 118   #
 119   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 120   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 121   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 122   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 123
 124   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 125
 126   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 127   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 128   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 129   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 130   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 131
 132   #
 133   # Multiple Console IO support
 134   #
 135   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 136   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 137   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 138
 139   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 140   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 141   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 142
 143   #
 144   # FAT filesystem + GPT/MBR partitioning
 145   #
 146   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 147   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 148   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 149   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 150
 151   #
 152   # UEFI application (Shell Embedded Boot Loader)
 153   #
 154   INF ShellPkg/Application/Shell/Shell.inf
 155
 156   #
 157   # Bds
 158   #
 159   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 160   INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
 161   INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 162   INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
 163
 164   INF OvmfPkg/XenBusDxe/XenBusDxe.inf
 165   INF OvmfPkg/XenPvBlkDxe/XenPvBlkDxe.inf
 166
 167 [FV.FVMAIN_COMPACT]
 168 FvAlignment        = 16
 169 ERASE_POLARITY     = 1
 170 MEMORY_MAPPED      = TRUE
 171 STICKY_WRITE       = TRUE
 172 LOCK_CAP           = TRUE
 173 LOCK_STATUS        = TRUE
 174 WRITE_DISABLED_CAP = TRUE
 175 WRITE_ENABLED_CAP  = TRUE
 176 WRITE_STATUS       = TRUE
 177 WRITE_LOCK_CAP     = TRUE
 178 WRITE_LOCK_STATUS  = TRUE
 179 READ_DISABLED_CAP  = TRUE
 180 READ_ENABLED_CAP   = TRUE
 181 READ_STATUS        = TRUE
 182 READ_LOCK_CAP      = TRUE
 183 READ_LOCK_STATUS   = TRUE
 184
 185   INF ArmPlatformPkg/ArmVirtualizationPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
 186
 187   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 188     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 189       SECTION FV_IMAGE = FVMAIN
 190     }
 191   }
 192
 193
 194 ################################################################################
 195 #
 196 # Rules are use with the [FV] section's module INF type to define
 197 # how an FFS file is created for a given INF file. The following Rule are the default
 198 # rules for the different module type. User can add the customized rules to define the
 199 # content of the FFS file.
 200 #
 201 ################################################################################
 202
 203
 204 ############################################################################
 205 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 206 ############################################################################
 207 #
 208 #[Rule.Common.DXE_DRIVER]
 209 #  FILE DRIVER = $(NAMED_GUID) {
 210 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 211 #    COMPRESS PI_STD {
 212 #      GUIDED {
 213 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 214 #        UI       STRING="$(MODULE_NAME)" Optional
 215 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 216 #      }
 217 #    }
 218 #  }
 219 #
 220 ############################################################################
 221
 222 [Rule.Common.SEC]
 223   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 224     TE  TE Align = 4K                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 225   }
 226
 227 [Rule.Common.PEI_CORE]
 228   FILE PEI_CORE = $(NAMED_GUID) {
 229     TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 230     UI     STRING ="$(MODULE_NAME)" Optional
 231   }
 232
 233 [Rule.Common.PEIM]
 234   FILE PEIM = $(NAMED_GUID) {
 235      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 236      TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
 237      UI       STRING="$(MODULE_NAME)" Optional
 238   }
 239
 240 [Rule.Common.PEIM.TIANOCOMPRESSED]
 241   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 242     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 243     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 244       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 245       UI        STRING="$(MODULE_NAME)" Optional
 246     }
 247   }
 248
 249 [Rule.Common.DXE_CORE]
 250   FILE DXE_CORE = $(NAMED_GUID) {
 251     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 252     UI       STRING="$(MODULE_NAME)" Optional
 253   }
 254
 255 [Rule.Common.UEFI_DRIVER]
 256   FILE DRIVER = $(NAMED_GUID) {
 257     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 258     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 259     UI           STRING="$(MODULE_NAME)" Optional
 260   }
 261
 262 [Rule.Common.DXE_DRIVER]
 263   FILE DRIVER = $(NAMED_GUID) {
 264     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 265     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 266     UI           STRING="$(MODULE_NAME)" Optional
 267   }
 268
 269 [Rule.Common.DXE_RUNTIME_DRIVER]
 270   FILE DRIVER = $(NAMED_GUID) {
 271     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 272     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 273     UI           STRING="$(MODULE_NAME)" Optional
 274   }
 275
 276 [Rule.Common.UEFI_APPLICATION]
 277   FILE APPLICATION = $(NAMED_GUID) {
 278     UI     STRING ="$(MODULE_NAME)"     Optional
 279     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 280   }
 281
 282 [Rule.Common.UEFI_DRIVER.BINARY]
 283   FILE DRIVER = $(NAMED_GUID) {
 284     DXE_DEPEX DXE_DEPEX Optional      |.depex
 285     PE32      PE32                    |.efi
 286     UI        STRING="$(MODULE_NAME)" Optional
 287     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 288   }
 289
 290 [Rule.Common.UEFI_APPLICATION.BINARY]
 291   FILE APPLICATION = $(NAMED_GUID) {
 292     PE32      PE32                    |.efi
 293     UI        STRING="$(MODULE_NAME)" Optional
 294     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 295   }
 296
 297 [Rule.Common.USER_DEFINED.ACPITABLE]
 298   FILE FREEFORM = $(NAMED_GUID) {
 299     RAW       ACPI                    |.acpi
 300     RAW       ASL                     |.aml
 301     UI        STRING="$(MODULE_NAME)" Optional
 302   }