ArmVirtPkg/ArmVirtQemu.fdf

   1 #
   2 #  Copyright (c) 2011-2015, ARM Limited. All rights reserved.
   3 #  Copyright (c) 2014, Linaro Limited. All rights reserved.
   4 #  Copyright (c) 2015, Intel Corporation. All rights reserved.
   5 #
   6 #  This program and the accompanying materials
   7 #  are licensed and made available under the terms and conditions of the BSD License
   8 #  which accompanies this distribution.  The full text of the license may be found at
   9 #  http://opensource.org/licenses/bsd-license.php
  10 #
  11 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14
  15 ################################################################################
  16 #
  17 # FD Section
  18 # The [FD] Section is made up of the definition statements and a
  19 # description of what goes into  the Flash Device Image.  Each FD section
  20 # defines one flash "device" image.  A flash device image may be one of
  21 # the following: Removable media bootable image (like a boot floppy
  22 # image,) an Option ROM image (that would be "flashed" into an add-in
  23 # card,) a System "Flash"  image (that would be burned into a system's
  24 # flash) or an Update ("Capsule") image that will be used to update and
  25 # existing system flash.
  26 #
  27 ################################################################################
  28
  29 [FD.QEMU_EFI]
  30 BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # QEMU assigns 0 - 0x8000000 for a BootROM
  31 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  32 ErasePolarity = 1
  33
  34 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  35 BlockSize     = 0x00001000
  36 NumBlocks     = 0x200
  37
  38 ################################################################################
  39 #
  40 # Following are lists of FD Region layout which correspond to the locations of different
  41 # images within the flash device.
  42 #
  43 # Regions must be defined in ascending order and may not overlap.
  44 #
  45 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  46 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  47 # "0x" characters. Like:
  48 # Offset|Size
  49 # PcdOffsetCName|PcdSizeCName
  50 # RegionType <FV, DATA, or FILE>
  51 #
  52 ################################################################################
  53
  54 #
  55 # UEFI has trouble dealing with FVs that reside at physical address 0x0.
  56 # So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the
  57 # real FV at offset 0x1000
  58 #
  59 0x00000000|0x00001000
  60 DATA = {
  61 !if $(ARCH) == AARCH64
  62   0x00, 0x04, 0x00, 0x14   # 'b 0x1000' in AArch64 ASM
  63 !else
  64   0xfe, 0x03, 0x00, 0xea   # 'b 0x1000' in AArch32 ASM
  65 !endif
  66 }
  67
  68 0x00001000|0x001ff000
  69 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  70 FV = FVMAIN_COMPACT
  71
  72
  73 ################################################################################
  74 #
  75 # FV Section
  76 #
  77 # [FV] section is used to define what components or modules are placed within a flash
  78 # device file.  This section also defines order the components and modules are positioned
  79 # within the image.  The [FV] section consists of define statements, set statements and
  80 # module statements.
  81 #
  82 ################################################################################
  83
  84 [FV.FvMain]
  85 BlockSize          = 0x40
  86 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  87 FvAlignment        = 16        # FV alignment and FV attributes setting.
  88 ERASE_POLARITY     = 1
  89 MEMORY_MAPPED      = TRUE
  90 STICKY_WRITE       = TRUE
  91 LOCK_CAP           = TRUE
  92 LOCK_STATUS        = TRUE
  93 WRITE_DISABLED_CAP = TRUE
  94 WRITE_ENABLED_CAP  = TRUE
  95 WRITE_STATUS       = TRUE
  96 WRITE_LOCK_CAP     = TRUE
  97 WRITE_LOCK_STATUS  = TRUE
  98 READ_DISABLED_CAP  = TRUE
  99 READ_ENABLED_CAP   = TRUE
 100 READ_STATUS        = TRUE
 101 READ_LOCK_CAP      = TRUE
 102 READ_LOCK_STATUS   = TRUE
 103
 104   APRIORI DXE {
 105     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 106     INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf
 107   }
 108   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 109   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 110   INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf
 111
 112   #
 113   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 114   #
 115   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 116   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 117   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 118   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 119   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 120   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 121 !if $(SECURE_BOOT_ENABLE) == TRUE
 122   INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
 123 !endif
 124   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 125   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 126   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 127   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 128   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 129
 130   #
 131   # Multiple Console IO support
 132   #
 133   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 134   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 135   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 136   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 137   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 138
 139   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 140   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 141 !if $(SECURE_BOOT_ENABLE) == TRUE
 142   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashAuthenticatedDxe.inf
 143 !else
 144   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 145 !endif
 146   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 147
 148   #
 149   # FAT filesystem + GPT/MBR partitioning
 150   #
 151   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 152   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 153   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 154   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 155
 156   #
 157   # Platform Driver
 158   #
 159   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 160   INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
 161   INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
 162
 163   #
 164   # UEFI application (Shell Embedded Boot Loader)
 165   #
 166   INF ShellPkg/Application/Shell/Shell.inf
 167
 168   #
 169   # Bds
 170   #
 171   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 172 !if $(INTEL_BDS) == TRUE
 173   INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
 174   INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 175   INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
 176 !else
 177   INF ArmPlatformPkg/Bds/Bds.inf
 178 !endif
 179
 180   #
 181   # Networking stack
 182   #
 183   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 184   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 185   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 186   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 187   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 188   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 189   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 190   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 191   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 192   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 193   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 194
 195   #
 196   # SCSI Bus and Disk Driver
 197   #
 198   INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
 199   INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
 200
 201   #
 202   # ACPI Support
 203   #
 204   INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
 205   INF OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf
 206
 207   #
 208   # PCI support
 209   #
 210   INF ArmVirtPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
 211   INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
 212   INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
 213
 214   #
 215   # Video support
 216   #
 217   INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
 218   INF OvmfPkg/PlatformDxe/Platform.inf
 219
 220   #
 221   # USB Support
 222   #
 223   INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
 224   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 225   INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
 226   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 227   INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
 228
 229 !if $(INTEL_BDS) == TRUE
 230   #
 231   # TianoCore logo (splash screen)
 232   #
 233   FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
 234     SECTION RAW = MdeModulePkg/Logo/Logo.bmp
 235   }
 236 !endif
 237
 238 [FV.FVMAIN_COMPACT]
 239 FvAlignment        = 16
 240 ERASE_POLARITY     = 1
 241 MEMORY_MAPPED      = TRUE
 242 STICKY_WRITE       = TRUE
 243 LOCK_CAP           = TRUE
 244 LOCK_STATUS        = TRUE
 245 WRITE_DISABLED_CAP = TRUE
 246 WRITE_ENABLED_CAP  = TRUE
 247 WRITE_STATUS       = TRUE
 248 WRITE_LOCK_CAP     = TRUE
 249 WRITE_LOCK_STATUS  = TRUE
 250 READ_DISABLED_CAP  = TRUE
 251 READ_ENABLED_CAP   = TRUE
 252 READ_STATUS        = TRUE
 253 READ_LOCK_CAP      = TRUE
 254 READ_LOCK_STATUS   = TRUE
 255
 256   APRIORI PEI {
 257     INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 258   }
 259   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
 260   INF MdeModulePkg/Core/Pei/PeiMain.inf
 261   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 262   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 263   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 264   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 265   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 266   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 267
 268   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 269     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 270       SECTION FV_IMAGE = FVMAIN
 271     }
 272   }
 273
 274
 275 ################################################################################
 276 #
 277 # Rules are use with the [FV] section's module INF type to define
 278 # how an FFS file is created for a given INF file. The following Rule are the default
 279 # rules for the different module type. User can add the customized rules to define the
 280 # content of the FFS file.
 281 #
 282 ################################################################################
 283
 284
 285 ############################################################################
 286 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 287 ############################################################################
 288 #
 289 #[Rule.Common.DXE_DRIVER]
 290 #  FILE DRIVER = $(NAMED_GUID) {
 291 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 292 #    COMPRESS PI_STD {
 293 #      GUIDED {
 294 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 295 #        UI       STRING="$(MODULE_NAME)" Optional
 296 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 297 #      }
 298 #    }
 299 #  }
 300 #
 301 ############################################################################
 302
 303 [Rule.Common.SEC]
 304   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 305     TE  TE Align = 128                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 306   }
 307
 308 [Rule.Common.PEI_CORE]
 309   FILE PEI_CORE = $(NAMED_GUID) {
 310     TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 311     UI     STRING ="$(MODULE_NAME)" Optional
 312   }
 313
 314 [Rule.Common.PEIM]
 315   FILE PEIM = $(NAMED_GUID) {
 316      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 317      TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
 318      UI       STRING="$(MODULE_NAME)" Optional
 319   }
 320
 321 [Rule.Common.PEIM.TIANOCOMPRESSED]
 322   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 323     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 324     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 325       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 326       UI        STRING="$(MODULE_NAME)" Optional
 327     }
 328   }
 329
 330 [Rule.Common.DXE_CORE]
 331   FILE DXE_CORE = $(NAMED_GUID) {
 332     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 333     UI       STRING="$(MODULE_NAME)" Optional
 334   }
 335
 336 [Rule.Common.UEFI_DRIVER]
 337   FILE DRIVER = $(NAMED_GUID) {
 338     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 339     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 340     UI           STRING="$(MODULE_NAME)" Optional
 341   }
 342
 343 [Rule.Common.DXE_DRIVER]
 344   FILE DRIVER = $(NAMED_GUID) {
 345     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 346     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 347     UI           STRING="$(MODULE_NAME)" Optional
 348   }
 349
 350 [Rule.Common.DXE_RUNTIME_DRIVER]
 351   FILE DRIVER = $(NAMED_GUID) {
 352     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 353     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 354     UI           STRING="$(MODULE_NAME)" Optional
 355   }
 356
 357 [Rule.Common.UEFI_APPLICATION]
 358   FILE APPLICATION = $(NAMED_GUID) {
 359     UI     STRING ="$(MODULE_NAME)"     Optional
 360     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 361   }
 362
 363 [Rule.Common.UEFI_DRIVER.BINARY]
 364   FILE DRIVER = $(NAMED_GUID) {
 365     DXE_DEPEX DXE_DEPEX Optional      |.depex
 366     PE32      PE32                    |.efi
 367     UI        STRING="$(MODULE_NAME)" Optional
 368     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 369   }
 370
 371 [Rule.Common.UEFI_APPLICATION.BINARY]
 372   FILE APPLICATION = $(NAMED_GUID) {
 373     PE32      PE32                    |.efi
 374     UI        STRING="$(MODULE_NAME)" Optional
 375     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 376   }
 377
 378 [Rule.Common.USER_DEFINED.ACPITABLE]
 379   FILE FREEFORM = $(NAMED_GUID) {
 380     RAW       ACPI                    |.acpi
 381     RAW       ASL                     |.aml
 382     UI        STRING="$(MODULE_NAME)" Optional
 383   }