BaseTools/Conf/build_rule.template

   1 #
   2 #  Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
   3 #  Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ## Syntax
  14 #
  15 # "*" is used to indicate that the source files will be processed at the same time.
  16 # "?" is used to indicate that the source files will be processed one by one.
  17 #
  18 # "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
  19 #   <InputFile[.<ToolChainFamily>]> <EOL>
  20 #       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
  21 #
  22 #   <OutputFile[.<ToolChainFamily>]> <EOL>
  23 #       <FileFullPath>
  24 #
  25 #   <ExtraDependency>
  26 #       <FileFullPath>
  27 #
  28 #   <Command[.<ToolChainFamily>]> <EOL>
  29 #       <Command1>
  30 #       [<Command2>]
  31 #
  32 # <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
  33 # Missing <InputFile> will cause an exception and break build.
  34 # Missing <Command> will cause that related build target won't be generated but
  35 #   won't break build.
  36 #
  37
  38 ## Placeholders for string substitution
  39 #
  40 #   ${src}      Source file(s) to be built (full path)
  41 #   ${s_path}   Source file directory (absolute path)
  42 #   ${s_dir}    Source file relative directory within a module
  43 #               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
  44 #   ${s_name}   Source file name without path
  45 #   ${s_base}   Source file name without extension and path
  46 #   ${s_ext}    Source file extension
  47 #
  48 #   ${dst}      Destination file(s) built from ${src} (full path)
  49 #   ${d_path}   Destination file directory (absolute path)
  50 #   ${d_name}   Destination file name without path
  51 #   ${d_base}   Destination file name without extension and path
  52 #   ${d_ext}    Destination file extension
  53 #
  54 #   (+)         Directory separator
  55 #
  56
  57 ## Macro
  58 #   $(WORKSPACE)        Workspace directory
  59 #   $(OUTPUT_DIR)       Directory for intermediate files for building a module
  60 #   $(DEBUG_DIR)        Directory for files used to debug a module
  61 #   $(BUILD_DIR)        All files for building a platform will be put in this directory
  62 #   $(BIN_DIR)          Common directory for executable files
  63 #   $(FV_DIR)           Directory to store flash image files
  64 #   $(INC)              Search path of current module
  65 #   $(INC_LIST)         A file containing search pathes of current module
  66 #   $(LIBS)             Static library files of current module
  67 #   $(<tool>_FLAGS)     Tools flags of current module
  68 #   $(MODULE_NAME)      Current module name
  69 #   $(MODULE_TYPE)      Current module type
  70 #   $(MODULE_GUID)      Current module guid
  71 #   $(ARCH)             Architecture of current module
  72 #   $(TOOLCHAIN)        Toolchain used to build current module
  73 #   $(TARGET)           Target of current module (DEBUG/RELEASE)
  74 #   $(<tool>)           Path of tool
  75 #   $(EDK_TOOLS_PATH)   Path of build tools
  76 #   $(<FILE_TYPES>)     File list of each file type
  77 #                       (Note: The macro name is derived from file type name. For example,
  78 #                        C-Code-File will have C_CODE_FILES macro.)
  79 #   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
  80 #                       (
  81 #                        Note: The macro and file name are derived from file type name.
  82 #                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
  83 #                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
  84 #                        will be generated only when this macro is used in command line.
  85 #                        This is intended to get over the long command line limitation.
  86 #                       )
  87 #
  88 #   $(CP)     copy command
  89 #   $(MV)     move command
  90 #   $(RM)     delete command
  91 #   $(MD)     create dir command
  92 #   $(RD)     remove dir command
  93 #
  94
  95 ## Reserved File-Type
  96 #
  97 # Don't change following names of file types and their associated files,
  98 # which are also used in tools' code
  99 #
 100 #   C-Code-File
 101 #   C-Header-File
 102 #   Dynamic-Library-File
 103 #   Static-Library-File
 104 #   Visual-Form-Representation-File
 105 #   Unicode-Text-File
 106 #
 107
 108 [C-Code-File]
 109     <InputFile>
 110         ?.c
 111         ?.C
 112         ?.cc
 113         ?.CC
 114         ?.cpp
 115         ?.Cpp
 116         ?.CPP
 117
 118     <ExtraDependency>
 119         $(MAKE_FILE)
 120
 121     <OutputFile>
 122         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 123
 124     <Command.MSFT, Command.INTEL>
 125         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 126
 127     <Command.GCC, Command.RVCT>
 128         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 129         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 130         "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
 131
 132     <Command.ARMGCC, Command.ARMLINUXGCC>
 133         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 134
 135
 136 [C-Header-File]
 137     <InputFile>
 138         *.h, *.H
 139
 140     <OutputFile>
 141
 142     <Command>
 143
 144
 145 [Assembly-Code-File.COMMON.COMMON]
 146     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 147         ?.asm, ?.Asm, ?.ASM
 148
 149     <InputFile.GCC>
 150         ?.S, ?.s
 151
 152     <ExtraDependency>
 153         $(MAKE_FILE)
 154
 155     <OutputFile>
 156         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 157
 158     <Command.MSFT, Command.INTEL>
 159         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 160         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 161         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 162
 163     <Command.GCC, Command.RVCT>
 164         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 165         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 166         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 167         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 168
 169 [Assembly-Code-File.COMMON.IPF]
 170     <InputFile>
 171         ?.s
 172
 173     <ExtraDependency>
 174         $(MAKE_FILE)
 175
 176     <OutputFile>
 177         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 178
 179     <Command.MSFT, Command.INTEL>
 180         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 181         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 182         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 183         "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
 184
 185 [Visual-Form-Representation-File]
 186     <InputFile>
 187         ?.vfr
 188         ?.Vfr
 189         ?.VFR
 190
 191     <ExtraDependency>
 192         $(MAKE_FILE)
 193
 194     <OutputFile>
 195         $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
 196
 197     <Command>
 198         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
 199         "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
 200
 201 [Object-File]
 202     <InputFile>
 203         *.obj
 204         *.o
 205
 206     <OutputFile>
 207         $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
 208
 209     <Command.MSFT, Command.INTEL>
 210         "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
 211
 212     <Command.GCC>
 213         "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
 214
 215     <Command.RVCT>
 216         "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
 217
 218     <Command.RVCTCYGWIN, Command.ARMGCC, Command.ARMLINUXGCC>
 219         # $(OBJECT_FILES_LIST) has wrong paths for cygwin
 220         "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
 221
 222     <Command.XCODE>
 223         "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
 224
 225 [Static-Library-File]
 226     <InputFile>
 227         *.lib
 228
 229     <ExtraDependency>
 230         $(MAKE_FILE)
 231
 232     <OutputFile>
 233         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 234
 235     <Command.MSFT, Command.INTEL>
 236         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 237
 238     <Command.GCC>
 239         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)
 240         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 241
 242     <Command.ARMGCC, Command.ARMLINUXGCC>
 243         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) -\) $(DLINK2_FLAGS)
 244
 245     <Command.RVCT>
 246         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 247
 248     <Command.RVCTCYGWIN>
 249         #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
 250         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 251
 252     <Command.XCODE>
 253         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 254
 255
 256 [Static-Library-File.USER_DEFINED]
 257     <InputFile>
 258         *.lib
 259
 260     <ExtraDependency>
 261         $(MAKE_FILE)
 262
 263     <OutputFile>
 264         $(DEBUG_DIR)(+)$(MODULE_NAME)
 265
 266     <Command.MSFT, Command.INTEL>
 267         "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 268
 269     <Command.GCC>
 270         "$(DLINK)" $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)
 271
 272     <Command.ARMGCC, Command.ARMLINUXGCC>
 273         "$(DLINK)" $(DLINK_FLAGS) -\( $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) -\) $(DLINK2_FLAGS)
 274
 275     <Command.RVCT>
 276         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 277
 278     <Command.RVCTCYGWIN>
 279         #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
 280         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 281
 282     <Command.XCODE>
 283         "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 284
 285
 286 [Dynamic-Library-File]
 287     <InputFile>
 288         ?.dll
 289
 290     <OutputFile>
 291         $(DEBUG_DIR)(+)$(MODULE_NAME).efi
 292
 293     <Command.MSFT, Command.INTEL, Command.RVCT, Command.ARMGCC, Command.ARMLINUXGCC>
 294         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 295         $(CP) ${dst} $(OUTPUT_DIR)
 296         $(CP) ${dst} $(BIN_DIR)
 297         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 298
 299     <Command.GCC>
 300         $(OBJCOPY) --only-keep-debug ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
 301         $(OBJCOPY) --strip-unneeded ${src}
 302
 303         #
 304         #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
 305         #
 306         -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
 307         -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)
 308
 309         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 310         $(CP) ${dst} $(OUTPUT_DIR)
 311         $(CP) ${dst} $(BIN_DIR)
 312         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 313
 314     <Command.XCODE>
 315         # tool to convert Mach-O to PE/COFF
 316         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 317         # create symbol file for GDB debug
 318         -$(DSYMUTIL) ${src}
 319         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
 320         $(CP) ${dst} $(OUTPUT_DIR)
 321         $(CP) ${dst} $(BIN_DIR)
 322         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 323
 324 [Dependency-Expression-File]
 325     <InputFile>
 326         ?.dxs, ?.Dxs, ?.DXS
 327
 328     <OutputFile>
 329         $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
 330
 331     <ExtraDependency>
 332         $(MAKE_FILE)
 333
 334     <Command>
 335         "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 336         Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 337         GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 338
 339 [Acpi-Source-Language-File]
 340     <InputFile>
 341         ?.asl, ?.Asl, ?.ASL
 342
 343     <OutputFile>
 344         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
 345
 346     <ExtraDependency>
 347         $(MAKE_FILE)
 348
 349     <Command.MSFT, Command.INTEL>
 350         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 351         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 352         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 353         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 354
 355     <Command.GCC>
 356         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 357         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 358         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 359
 360 [C-Code-File.AcpiTable]
 361     <InputFile>
 362         ?.c
 363
 364     <OutputFile>
 365         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 366
 367     <ExtraDependency>
 368         $(MAKE_FILE)
 369
 370     <Command.MSFT, Command.INTEL>
 371         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 372         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 373         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 374
 375     <Command.GCC>
 376         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 377         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 378         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 379
 380 [Acpi-Table-Code-File]
 381     <InputFile>
 382         ?.aslc, ?.act
 383
 384     <OutputFile>
 385         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 386
 387     <ExtraDependency>
 388         $(MAKE_FILE)
 389
 390     <Command.MSFT, Command.INTEL>
 391         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 392         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 393         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 394
 395     <Command.GCC>
 396         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 397         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 398         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 399
 400     <Command.XCODE>
 401         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
 402         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 403         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
 404         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
 405
 406
 407 [Masm16-Code-File]
 408     <InputFile>
 409         ?.asm16, ?.Asm16, ?.ASM16
 410
 411     <ExtraDependency>
 412         $(MAKE_FILE)
 413
 414     <OutputFile>
 415         $(OUTPUT_DIR)(+)${s_base}.com
 416
 417     <Command.MSFT, Command.INTEL>
 418         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 419         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 420         cd $(OUTPUT_DIR)(+)${s_dir}
 421         "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
 422         "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
 423
 424     <Command.GCC>
 425       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 426       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 427       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 428       "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj -\)
 429
 430     <Command.XCODE>
 431       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 432       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 433       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 434       "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 435       otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
 436
 437
 438 [Microcode-File.USER_DEFINED, Microcode-File.Microcode]
 439     <InputFile>
 440         ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
 441
 442     <OutputFile>
 443         $(OUTPUT_DIR)(+)${s_base}.mcb
 444
 445     <Command>
 446         "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
 447
 448 [Microcode-Binary-File]
 449     <InputFile>
 450         *.mcb
 451
 452     <ExtraDependency>
 453         $(MAKE_FILE)
 454
 455     <OutputFile>
 456         $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
 457
 458     <Command>
 459         "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
 460         -$(CP) ${dst} $(BIN_DIR)
 461
 462 [EFI-Image-File]
 463     <InputFile>
 464         ?.efi, ?.Efi, ?.EFI
 465
 466     <OutputFile>
 467
 468     <Command>
 469
 470 [Unicode-Text-File]
 471     <InputFile>
 472         *.uni, *.Uni, *.UNI
 473
 474     <OutputFile>
 475         $(DEBUG_DIR)(+)AutoGen.c
 476         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 477         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 478
 479     <Command>
 480
 481 [Efi-Image.UEFI_OPTIONROM]
 482     <InputFile>
 483         ?.efi, ?.EFI, ?.Efi
 484
 485     <OutputFile>
 486         $(BIN_DIR)(+)$(MODULE_NAME).rom
 487
 488     <Command>
 489         $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
 490
 491 [Unicode-Text-File.UEFI_HII]
 492     <InputFile>
 493         *.uni, *.Uni, *.UNI
 494
 495     <OutputFile>
 496         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 497         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 498
 499     <Command>
 500
 501 [Visual-Form-Representation-File.UEFI_HII]
 502     <InputFile>
 503         ?.vfr
 504         ?.Vfr
 505         ?.VFR
 506
 507     <ExtraDependency>
 508         $(MAKE_FILE)
 509
 510     <OutputFile>
 511         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
 512
 513     <Command>
 514         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 515         "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 516
 517 [Hii-Binary-Package.UEFI_HII]
 518     <InputFile>
 519         *.hpk
 520
 521     <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
 522         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
 523
 524     <OutputFile.XCODE, OutputFile.RVCT, OutputFile.ARMGCC>
 525         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 526
 527     <Command.MSFT, Command.INTEL>
 528         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 529         "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 530
 531     <Command.GCC>
 532         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 533         "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
 534
 535     <Command.XCODE, Command.RVCT, Command.ARMGCC, Command.ARMLINUXGCC>
 536         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
 537
 538