BaseTools/Conf/build_rule.template

   1 #
   2 #  Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
   3 #  Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ## Syntax
  14 #
  15 # "*" is used to indicate that the source files will be processed at the same time.
  16 # "?" is used to indicate that the source files will be processed one by one.
  17 #
  18 # "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
  19 #   <InputFile[.<ToolChainFamily>]> <EOL>
  20 #       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
  21 #
  22 #   <OutputFile[.<ToolChainFamily>]> <EOL>
  23 #       <FileFullPath>
  24 #
  25 #   <ExtraDependency>
  26 #       <FileFullPath>
  27 #
  28 #   <Command[.<ToolChainFamily>]> <EOL>
  29 #       <Command1>
  30 #       [<Command2>]
  31 #
  32 # <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
  33 # Missing <InputFile> will cause an exception and break build.
  34 # Missing <Command> will cause that related build target won't be generated but
  35 #   won't break build.
  36 #
  37
  38 ## Placeholders for string substitution
  39 #
  40 #   ${src}      Source file(s) to be built (full path)
  41 #   ${s_path}   Source file directory (absolute path)
  42 #   ${s_dir}    Source file relative directory within a module
  43 #               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
  44 #   ${s_name}   Source file name without path
  45 #   ${s_base}   Source file name without extension and path
  46 #   ${s_ext}    Source file extension
  47 #
  48 #   ${dst}      Destination file(s) built from ${src} (full path)
  49 #   ${d_path}   Destination file directory (absolute path)
  50 #   ${d_name}   Destination file name without path
  51 #   ${d_base}   Destination file name without extension and path
  52 #   ${d_ext}    Destination file extension
  53 #
  54 #   (+)         Directory separator
  55 #
  56
  57 ## Macro
  58 #   $(WORKSPACE)        Workspace directory
  59 #   $(OUTPUT_DIR)       Directory for intermediate files for building a module
  60 #   $(DEBUG_DIR)        Directory for files used to debug a module
  61 #   $(BUILD_DIR)        All files for building a platform will be put in this directory
  62 #   $(BIN_DIR)          Common directory for executable files
  63 #   $(FV_DIR)           Directory to store flash image files
  64 #   $(INC)              Search path of current module
  65 #   $(INC_LIST)         A file containing search pathes of current module
  66 #   $(LIBS)             Static library files of current module
  67 #   $(<tool>_FLAGS)     Tools flags of current module
  68 #   $(MODULE_NAME)      Current module name
  69 #   $(MODULE_NAME_GUID) Current module name with module FILE_GUID if same $(MODULE_NAME) exists
  70 #                       in different modules, otherwise its value is same as $(MODULE_NAME)
  71 #   $(MODULE_TYPE)      Current module type
  72 #   $(MODULE_GUID)      Current module guid
  73 #   $(ARCH)             Architecture of current module
  74 #   $(TOOLCHAIN)        Toolchain used to build current module
  75 #   $(TARGET)           Target of current module (DEBUG/RELEASE)
  76 #   $(<tool>)           Path of tool
  77 #   $(EDK_TOOLS_PATH)   Path of build tools
  78 #   $(<FILE_TYPES>)     File list of each file type
  79 #                       (Note: The macro name is derived from file type name. For example,
  80 #                        C-Code-File will have C_CODE_FILES macro.)
  81 #   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
  82 #                       (
  83 #                        Note: The macro and file name are derived from file type name.
  84 #                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
  85 #                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
  86 #                        will be generated only when this macro is used in command line.
  87 #                        This is intended to get over the long command line limitation.
  88 #                       )
  89 #
  90 #   $(CP)     copy command
  91 #   $(MV)     move command
  92 #   $(RM)     delete command
  93 #   $(MD)     create dir command
  94 #   $(RD)     remove dir command
  95 #
  96
  97 ## Reserved File-Type
  98 #
  99 # Don't change following names of file types and their associated files,
 100 # which are also used in tools' code
 101 #
 102 #   C-Code-File
 103 #   C-Header-File
 104 #   Dynamic-Library-File
 105 #   Static-Library-File
 106 #   Visual-Form-Representation-File
 107 #   Unicode-Text-File
 108 #
 109
 110 ## Build Rule Version Number
 111 #  build_rule_version=0.1
 112 #
 113
 114 [C-Code-File]
 115     <InputFile>
 116         ?.c
 117         ?.C
 118         ?.cc
 119         ?.CC
 120         ?.cpp
 121         ?.Cpp
 122         ?.CPP
 123
 124     <ExtraDependency>
 125         $(MAKE_FILE)
 126
 127     <OutputFile>
 128         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 129
 130     <Command.MSFT, Command.INTEL>
 131         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 132
 133     <Command.GCC, Command.RVCT>
 134         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 135         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 136
 137     <Command.XCODE>
 138         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 139
 140 [C-Code-File.COMMON.IPF]
 141     <InputFile>
 142         ?.c
 143         ?.C
 144         ?.cc
 145         ?.CC
 146         ?.cpp
 147         ?.Cpp
 148         ?.CPP
 149
 150     <ExtraDependency>
 151         $(MAKE_FILE)
 152
 153     <OutputFile>
 154         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 155
 156     <Command.MSFT, Command.INTEL>
 157         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 158
 159     <Command.GCC, Command.RVCT>
 160         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 161         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 162         "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
 163
 164 [C-Code-File.BASE.AARCH64,C-Code-File.SEC.AARCH64,C-Code-File.PEI_CORE.AARCH64,C-Code-File.PEIM.AARCH64]
 165     <InputFile>
 166         ?.c
 167
 168     <ExtraDependency>
 169         $(MAKE_FILE)
 170
 171     <OutputFile>
 172         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 173
 174     <Command.GCC>
 175         "$(CC)" $(CC_FLAGS) $(CC_XIPFLAGS) -o ${dst} $(INC) ${src}
 176
 177 [C-Header-File]
 178     <InputFile>
 179         *.h, *.H
 180
 181     <OutputFile>
 182
 183     <Command>
 184
 185
 186 [Assembly-Code-File.COMMON.COMMON]
 187     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 188         ?.asm, ?.Asm, ?.ASM
 189
 190     <InputFile.GCC>
 191         ?.S, ?.s
 192
 193     <ExtraDependency>
 194         $(MAKE_FILE)
 195
 196     <OutputFile>
 197         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 198
 199     <Command.MSFT, Command.INTEL>
 200         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 201         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 202         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 203
 204     <Command.GCC, Command.RVCT>
 205         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 206         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 207         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 208         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 209
 210 [Nasm-Assembly-Code-File.COMMON.COMMON]
 211     <InputFile>
 212         ?.nasm
 213
 214     <ExtraDependency>
 215         $(MAKE_FILE)
 216
 217     <OutputFile>
 218         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 219
 220     <Command>
 221         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 222         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 223         "$(NASM)" -I${s_path}(+) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 224
 225 [Assembly-Code-File.COMMON.IPF]
 226     <InputFile>
 227         ?.s
 228
 229     <ExtraDependency>
 230         $(MAKE_FILE)
 231
 232     <OutputFile>
 233         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 234
 235     <Command.MSFT, Command.INTEL>
 236         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 237         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 238         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 239         "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
 240
 241 [Visual-Form-Representation-File]
 242     <InputFile>
 243         ?.vfr
 244         ?.Vfr
 245         ?.VFR
 246
 247     <ExtraDependency>
 248         $(MAKE_FILE)
 249
 250     <OutputFile>
 251         $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
 252
 253     <Command>
 254         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
 255         "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
 256
 257 [Object-File]
 258     <InputFile>
 259         *.obj
 260         *.o
 261
 262     <OutputFile>
 263         $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
 264
 265     <Command.MSFT, Command.INTEL>
 266         "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
 267
 268     <Command.GCC>
 269         "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
 270
 271     <Command.RVCT>
 272         "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
 273
 274     <Command.RVCTCYGWIN>
 275         # $(OBJECT_FILES_LIST) has wrong paths for cygwin
 276         "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
 277
 278     <Command.XCODE>
 279         "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
 280
 281 [Static-Library-File]
 282     <InputFile>
 283         *.lib
 284
 285     <ExtraDependency>
 286         $(MAKE_FILE)
 287
 288     <OutputFile>
 289         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 290
 291     <Command.MSFT, Command.INTEL>
 292         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 293
 294     <Command.GCC>
 295         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 296         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 297
 298     <Command.RVCT>
 299         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 300
 301     <Command.RVCTCYGWIN>
 302         #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
 303         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 304
 305     <Command.XCODE>
 306         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 307
 308
 309 [Static-Library-File.USER_DEFINED]
 310     <InputFile>
 311         *.lib
 312
 313     <ExtraDependency>
 314         $(MAKE_FILE)
 315
 316     <OutputFile>
 317         $(DEBUG_DIR)(+)$(MODULE_NAME)
 318
 319     <Command.MSFT, Command.INTEL>
 320         "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 321
 322     <Command.GCC>
 323         "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 324
 325     <Command.RVCT>
 326         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 327
 328     <Command.RVCTCYGWIN>
 329         #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
 330         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 331
 332     <Command.XCODE>
 333         "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 334
 335
 336 [Dynamic-Library-File]
 337     <InputFile>
 338         ?.dll
 339
 340     <OutputFile>
 341         $(DEBUG_DIR)(+)$(MODULE_NAME).efi
 342
 343     <Command.MSFT, Command.INTEL, Command.RVCT>
 344         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 345         $(CP) ${dst} $(OUTPUT_DIR)
 346         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 347         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 348         -$(CP) $(DEBUG_DIR)(+)*.pdb $(OUTPUT_DIR)
 349     <Command.GCC>
 350         $(CP) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
 351         $(OBJCOPY) --strip-unneeded -R .eh_frame ${src}
 352
 353         #
 354         #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
 355         #
 356         -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
 357         -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)(+)$(MODULE_NAME_GUID).debug
 358
 359         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 360         $(CP) ${dst} $(OUTPUT_DIR)
 361         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 362         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 363
 364     <Command.XCODE>
 365         # tool to convert Mach-O to PE/COFF
 366         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 367         # create symbol file for GDB debug
 368         -$(DSYMUTIL) ${src}
 369         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
 370         $(CP) ${dst} $(OUTPUT_DIR)
 371         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 372         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 373
 374 [Dependency-Expression-File]
 375     <InputFile>
 376         ?.dxs, ?.Dxs, ?.DXS
 377
 378     <OutputFile>
 379         $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
 380
 381     <ExtraDependency>
 382         $(MAKE_FILE)
 383
 384     <Command>
 385         "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 386         Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 387         GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 388
 389 [Acpi-Source-Language-File]
 390     <InputFile>
 391         ?.asl, ?.Asl, ?.ASL
 392
 393     <OutputFile>
 394         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
 395
 396     <ExtraDependency>
 397         $(MAKE_FILE)
 398
 399     <Command.MSFT, Command.INTEL>
 400         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 401         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 402         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 403         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 404
 405     <Command.GCC>
 406         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 407         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 408         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 409         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 410
 411 [C-Code-File.AcpiTable]
 412     <InputFile>
 413         ?.c
 414
 415     <OutputFile>
 416         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 417
 418     <ExtraDependency>
 419         $(MAKE_FILE)
 420
 421     <Command.MSFT, Command.INTEL>
 422         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 423         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 424         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 425
 426     <Command.GCC>
 427         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 428         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 429         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 430
 431 [Acpi-Table-Code-File]
 432     <InputFile>
 433         ?.aslc, ?.act
 434
 435     <OutputFile>
 436         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 437
 438     <ExtraDependency>
 439         $(MAKE_FILE)
 440
 441     <Command.MSFT, Command.INTEL>
 442         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 443         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 444         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 445
 446     <Command.GCC>
 447         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 448         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 449         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 450
 451     <Command.XCODE>
 452         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
 453         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 454         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
 455         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
 456
 457
 458 [Masm16-Code-File]
 459     <InputFile>
 460         ?.asm16, ?.Asm16, ?.ASM16, ?.s16, ?.S16
 461
 462     <ExtraDependency>
 463         $(MAKE_FILE)
 464
 465     <OutputFile>
 466         $(OUTPUT_DIR)(+)${s_base}.com
 467
 468     <Command.MSFT, Command.INTEL>
 469         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 470         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 471         cd $(OUTPUT_DIR)(+)${s_dir}
 472         "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
 473         "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
 474
 475     <Command.GCC>
 476       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 477       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 478       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 479       "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
 480
 481     <Command.XCODE>
 482       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 483       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 484       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 485       "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 486       otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
 487
 488
 489 [Nasm-to-Binary-Code-File]
 490     <InputFile>
 491         ?.nasmb
 492
 493     <ExtraDependency>
 494         $(MAKE_FILE)
 495
 496     <OutputFile>
 497         $(OUTPUT_DIR)(+)${s_base}.bin
 498
 499     <Command>
 500         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 501         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 502         "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 503         # copy the output file with .com postfix that be same to the output file of .asm16
 504         $(CP) ${dst} $(OUTPUT_DIR)(+)${s_base}.com
 505
 506 [Microcode-File.USER_DEFINED, Microcode-File.Microcode]
 507     <InputFile>
 508         ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
 509
 510     <OutputFile>
 511         $(OUTPUT_DIR)(+)${s_base}.mcb
 512
 513     <Command>
 514         "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
 515
 516 [Microcode-Binary-File]
 517     <InputFile>
 518         *.mcb
 519
 520     <ExtraDependency>
 521         $(MAKE_FILE)
 522
 523     <OutputFile>
 524         $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
 525
 526     <Command>
 527         "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
 528         -$(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).bin
 529
 530 [EFI-Image-File]
 531     <InputFile>
 532         ?.efi, ?.Efi, ?.EFI
 533
 534     <OutputFile>
 535
 536     <Command>
 537
 538 [Unicode-Text-File]
 539     <InputFile>
 540         *.uni, *.Uni, *.UNI
 541
 542     <OutputFile>
 543         $(DEBUG_DIR)(+)AutoGen.c
 544         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 545         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 546
 547     <Command>
 548
 549 [Efi-Image.UEFI_OPTIONROM]
 550     <InputFile>
 551         ?.efi, ?.EFI, ?.Efi
 552
 553     <OutputFile>
 554         $(BIN_DIR)(+)$(MODULE_NAME_GUID).rom
 555
 556     <Command>
 557         $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
 558
 559 [Unicode-Text-File.UEFI_HII]
 560     <InputFile>
 561         *.uni, *.Uni, *.UNI
 562
 563     <OutputFile>
 564         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 565         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 566
 567     <Command>
 568
 569 [Visual-Form-Representation-File.UEFI_HII]
 570     <InputFile>
 571         ?.vfr
 572         ?.Vfr
 573         ?.VFR
 574
 575     <ExtraDependency>
 576         $(MAKE_FILE)
 577
 578     <OutputFile>
 579         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
 580
 581     <Command>
 582         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 583         "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 584
 585 [Hii-Binary-Package.UEFI_HII]
 586     <InputFile>
 587         *.hpk
 588
 589     <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
 590         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
 591
 592     <OutputFile.XCODE, OutputFile.RVCT>
 593         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 594
 595     <Command.MSFT, Command.INTEL>
 596         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 597         "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 598
 599     <Command.GCC>
 600         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 601         "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
 602
 603     <Command.XCODE, Command.RVCT>
 604         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
 605
 606