BaseTools/Conf/build_rule.template

   1 #
   2 #  Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
   3 #  Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ## Syntax
  14 #
  15 # "*" is used to indicate that the source files will be processed at the same time.
  16 # "?" is used to indicate that the source files will be processed one by one.
  17 #
  18 # "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
  19 #   <InputFile[.<ToolChainFamily>]> <EOL>
  20 #       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
  21 #
  22 #   <OutputFile[.<ToolChainFamily>]> <EOL>
  23 #       <FileFullPath>
  24 #
  25 #   <ExtraDependency>
  26 #       <FileFullPath>
  27 #
  28 #   <Command[.<ToolChainFamily>]> <EOL>
  29 #       <Command1>
  30 #       [<Command2>]
  31 #
  32 # <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
  33 # Missing <InputFile> will cause an exception and break build.
  34 # Missing <Command> will cause that related build target won't be generated but
  35 #   won't break build.
  36 #
  37
  38 ## Placeholders for string substitution
  39 #
  40 #   ${src}      Source file(s) to be built (full path)
  41 #   ${s_path}   Source file directory (absolute path)
  42 #   ${s_dir}    Source file relative directory within a module
  43 #               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
  44 #   ${s_name}   Source file name without path
  45 #   ${s_base}   Source file name without extension and path
  46 #   ${s_ext}    Source file extension
  47 #
  48 #   ${dst}      Destination file(s) built from ${src} (full path)
  49 #   ${d_path}   Destination file directory (absolute path)
  50 #   ${d_name}   Destination file name without path
  51 #   ${d_base}   Destination file name without extension and path
  52 #   ${d_ext}    Destination file extension
  53 #
  54 #   (+)         Directory separator
  55 #
  56
  57 ## Macro
  58 #   $(WORKSPACE)        Workspace directory
  59 #   $(OUTPUT_DIR)       Directory for intermediate files for building a module
  60 #   $(DEBUG_DIR)        Directory for files used to debug a module
  61 #   $(BUILD_DIR)        All files for building a platform will be put in this directory
  62 #   $(BIN_DIR)          Common directory for executable files
  63 #   $(FV_DIR)           Directory to store flash image files
  64 #   $(INC)              Search path of current module
  65 #   $(INC_LIST)         A file containing search pathes of current module
  66 #   $(LIBS)             Static library files of current module
  67 #   $(<tool>_FLAGS)     Tools flags of current module
  68 #   $(MODULE_NAME)      Current module name
  69 #   $(MODULE_NAME_GUID) Current module name with module FILE_GUID if same $(MODULE_NAME) exists
  70 #                       in different modules, otherwise its value is same as $(MODULE_NAME)
  71 #   $(MODULE_TYPE)      Current module type
  72 #   $(MODULE_GUID)      Current module guid
  73 #   $(ARCH)             Architecture of current module
  74 #   $(TOOLCHAIN)        Toolchain used to build current module
  75 #   $(TARGET)           Target of current module (DEBUG/RELEASE)
  76 #   $(<tool>)           Path of tool
  77 #   $(EDK_TOOLS_PATH)   Path of build tools
  78 #   $(<FILE_TYPES>)     File list of each file type
  79 #                       (Note: The macro name is derived from file type name. For example,
  80 #                        C-Code-File will have C_CODE_FILES macro.)
  81 #   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
  82 #                       (
  83 #                        Note: The macro and file name are derived from file type name.
  84 #                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
  85 #                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
  86 #                        will be generated only when this macro is used in command line.
  87 #                        This is intended to get over the long command line limitation.
  88 #                       )
  89 #
  90 #   $(CP)     copy command
  91 #   $(MV)     move command
  92 #   $(RM)     delete command
  93 #   $(MD)     create dir command
  94 #   $(RD)     remove dir command
  95 #
  96
  97 ## Reserved File-Type
  98 #
  99 # Don't change following names of file types and their associated files,
 100 # which are also used in tools' code
 101 #
 102 #   C-Code-File
 103 #   C-Header-File
 104 #   Dynamic-Library-File
 105 #   Static-Library-File
 106 #   Visual-Form-Representation-File
 107 #   Unicode-Text-File
 108 #
 109
 110 ## Build Rule Version Number
 111 #  build_rule_version=0.1
 112 #
 113
 114 [C-Code-File]
 115     <InputFile>
 116         ?.c
 117         ?.C
 118         ?.cc
 119         ?.CC
 120         ?.cpp
 121         ?.Cpp
 122         ?.CPP
 123
 124     <ExtraDependency>
 125         $(MAKE_FILE)
 126
 127     <OutputFile>
 128         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 129
 130     <Command.MSFT, Command.INTEL>
 131         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 132
 133     <Command.GCC, Command.RVCT>
 134         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 135         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 136
 137     <Command.ARMGCC, Command.ARMLINUXGCC, command.XCODE>
 138         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 139
 140 [C-Code-File.COMMON.IPF]
 141     <InputFile>
 142         ?.c
 143         ?.C
 144         ?.cc
 145         ?.CC
 146         ?.cpp
 147         ?.Cpp
 148         ?.CPP
 149
 150     <ExtraDependency>
 151         $(MAKE_FILE)
 152
 153     <OutputFile>
 154         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 155
 156     <Command.MSFT, Command.INTEL>
 157         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 158
 159     <Command.GCC, Command.RVCT>
 160         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 161         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 162         "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
 163
 164 [C-Header-File]
 165     <InputFile>
 166         *.h, *.H
 167
 168     <OutputFile>
 169
 170     <Command>
 171
 172
 173 [Assembly-Code-File.COMMON.COMMON]
 174     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 175         ?.asm, ?.Asm, ?.ASM
 176
 177     <InputFile.GCC>
 178         ?.S, ?.s
 179
 180     <ExtraDependency>
 181         $(MAKE_FILE)
 182
 183     <OutputFile>
 184         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 185
 186     <Command.MSFT, Command.INTEL>
 187         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 188         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 189         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 190
 191     <Command.GCC, Command.RVCT>
 192         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 193         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 194         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 195         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 196
 197 [Nasm-Assembly-Code-File.COMMON.COMMON]
 198     <InputFile>
 199         ?.nasm
 200
 201     <ExtraDependency>
 202         $(MAKE_FILE)
 203
 204     <OutputFile>
 205         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 206
 207     <Command>
 208         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 209         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 210         "$(NASM)" -I${s_path}(+) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 211
 212 [Assembly-Code-File.COMMON.IPF]
 213     <InputFile>
 214         ?.s
 215
 216     <ExtraDependency>
 217         $(MAKE_FILE)
 218
 219     <OutputFile>
 220         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 221
 222     <Command.MSFT, Command.INTEL>
 223         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 224         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 225         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 226         "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
 227
 228 [Visual-Form-Representation-File]
 229     <InputFile>
 230         ?.vfr
 231         ?.Vfr
 232         ?.VFR
 233
 234     <ExtraDependency>
 235         $(MAKE_FILE)
 236
 237     <OutputFile>
 238         $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
 239
 240     <Command>
 241         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
 242         "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
 243
 244 [Object-File]
 245     <InputFile>
 246         *.obj
 247         *.o
 248
 249     <OutputFile>
 250         $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
 251
 252     <Command.MSFT, Command.INTEL>
 253         "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
 254
 255     <Command.GCC>
 256         "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
 257
 258     <Command.RVCT>
 259         "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
 260
 261     <Command.RVCTCYGWIN, Command.ARMGCC, Command.ARMLINUXGCC>
 262         # $(OBJECT_FILES_LIST) has wrong paths for cygwin
 263         "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
 264
 265     <Command.XCODE>
 266         "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
 267
 268 [Static-Library-File]
 269     <InputFile>
 270         *.lib
 271
 272     <ExtraDependency>
 273         $(MAKE_FILE)
 274
 275     <OutputFile>
 276         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 277
 278     <Command.MSFT, Command.INTEL>
 279         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 280
 281     <Command.GCC>
 282         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 283         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 284
 285     <Command.ARMGCC, Command.ARMLINUXGCC>
 286         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) --end-group $(DLINK2_FLAGS)
 287
 288     <Command.RVCT>
 289         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 290
 291     <Command.RVCTCYGWIN>
 292         #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
 293         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 294
 295     <Command.XCODE>
 296         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 297
 298
 299 [Static-Library-File.USER_DEFINED]
 300     <InputFile>
 301         *.lib
 302
 303     <ExtraDependency>
 304         $(MAKE_FILE)
 305
 306     <OutputFile>
 307         $(DEBUG_DIR)(+)$(MODULE_NAME)
 308
 309     <Command.MSFT, Command.INTEL>
 310         "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 311
 312     <Command.GCC>
 313         "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 314
 315     <Command.ARMGCC, Command.ARMLINUXGCC>
 316         "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) --end-group $(DLINK2_FLAGS)
 317
 318     <Command.RVCT>
 319         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 320
 321     <Command.RVCTCYGWIN>
 322         #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
 323         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 324
 325     <Command.XCODE>
 326         "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 327
 328
 329 [Dynamic-Library-File]
 330     <InputFile>
 331         ?.dll
 332
 333     <OutputFile>
 334         $(DEBUG_DIR)(+)$(MODULE_NAME).efi
 335
 336     <Command.MSFT, Command.INTEL, Command.RVCT, Command.ARMGCC, Command.ARMLINUXGCC>
 337         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 338         $(CP) ${dst} $(OUTPUT_DIR)
 339         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 340         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 341         -$(CP) $(DEBUG_DIR)(+)*.pdb $(OUTPUT_DIR)
 342     <Command.GCC>
 343         $(CP) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
 344         $(OBJCOPY) --strip-unneeded -R .eh_frame ${src}
 345
 346         #
 347         #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
 348         #
 349         -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
 350         -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)(+)$(MODULE_NAME_GUID).debug
 351
 352         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 353         $(CP) ${dst} $(OUTPUT_DIR)
 354         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 355         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 356
 357     <Command.XCODE>
 358         # tool to convert Mach-O to PE/COFF
 359         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 360         # create symbol file for GDB debug
 361         -$(DSYMUTIL) ${src}
 362         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
 363         $(CP) ${dst} $(OUTPUT_DIR)
 364         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 365         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 366
 367 [Dependency-Expression-File]
 368     <InputFile>
 369         ?.dxs, ?.Dxs, ?.DXS
 370
 371     <OutputFile>
 372         $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
 373
 374     <ExtraDependency>
 375         $(MAKE_FILE)
 376
 377     <Command>
 378         "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 379         Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 380         GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 381
 382 [Acpi-Source-Language-File]
 383     <InputFile>
 384         ?.asl, ?.Asl, ?.ASL
 385
 386     <OutputFile>
 387         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
 388
 389     <ExtraDependency>
 390         $(MAKE_FILE)
 391
 392     <Command.MSFT, Command.INTEL>
 393         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 394         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 395         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 396         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 397
 398     <Command.GCC>
 399         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 400         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 401         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 402         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 403
 404 [C-Code-File.AcpiTable]
 405     <InputFile>
 406         ?.c
 407
 408     <OutputFile>
 409         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 410
 411     <ExtraDependency>
 412         $(MAKE_FILE)
 413
 414     <Command.MSFT, Command.INTEL>
 415         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 416         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 417         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 418
 419     <Command.GCC>
 420         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 421         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 422         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 423
 424 [Acpi-Table-Code-File]
 425     <InputFile>
 426         ?.aslc, ?.act
 427
 428     <OutputFile>
 429         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 430
 431     <ExtraDependency>
 432         $(MAKE_FILE)
 433
 434     <Command.MSFT, Command.INTEL>
 435         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 436         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 437         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 438
 439     <Command.GCC>
 440         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 441         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 442         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 443
 444     <Command.XCODE>
 445         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
 446         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 447         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
 448         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
 449
 450
 451 [Masm16-Code-File]
 452     <InputFile>
 453         ?.asm16, ?.Asm16, ?.ASM16, ?.s16, ?.S16
 454
 455     <ExtraDependency>
 456         $(MAKE_FILE)
 457
 458     <OutputFile>
 459         $(OUTPUT_DIR)(+)${s_base}.com
 460
 461     <Command.MSFT, Command.INTEL>
 462         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 463         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 464         cd $(OUTPUT_DIR)(+)${s_dir}
 465         "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
 466         "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
 467
 468     <Command.GCC>
 469       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 470       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 471       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 472       "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
 473
 474     <Command.XCODE>
 475       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 476       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 477       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 478       "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 479       otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
 480
 481
 482 [Nasm-to-Binary-Code-File]
 483     <InputFile>
 484         ?.nasmb
 485
 486     <ExtraDependency>
 487         $(MAKE_FILE)
 488
 489     <OutputFile>
 490         $(OUTPUT_DIR)(+)${s_base}.bin
 491
 492     <Command>
 493         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 494         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 495         "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 496         # copy the output file with .com postfix that be same to the output file of .asm16
 497         $(CP) ${dst} $(OUTPUT_DIR)(+)${s_base}.com
 498
 499 [Microcode-File.USER_DEFINED, Microcode-File.Microcode]
 500     <InputFile>
 501         ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
 502
 503     <OutputFile>
 504         $(OUTPUT_DIR)(+)${s_base}.mcb
 505
 506     <Command>
 507         "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
 508
 509 [Microcode-Binary-File]
 510     <InputFile>
 511         *.mcb
 512
 513     <ExtraDependency>
 514         $(MAKE_FILE)
 515
 516     <OutputFile>
 517         $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
 518
 519     <Command>
 520         "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
 521         -$(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).bin
 522
 523 [EFI-Image-File]
 524     <InputFile>
 525         ?.efi, ?.Efi, ?.EFI
 526
 527     <OutputFile>
 528
 529     <Command>
 530
 531 [Unicode-Text-File]
 532     <InputFile>
 533         *.uni, *.Uni, *.UNI
 534
 535     <OutputFile>
 536         $(DEBUG_DIR)(+)AutoGen.c
 537         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 538         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 539
 540     <Command>
 541
 542 [Efi-Image.UEFI_OPTIONROM]
 543     <InputFile>
 544         ?.efi, ?.EFI, ?.Efi
 545
 546     <OutputFile>
 547         $(BIN_DIR)(+)$(MODULE_NAME_GUID).rom
 548
 549     <Command>
 550         $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
 551
 552 [Unicode-Text-File.UEFI_HII]
 553     <InputFile>
 554         *.uni, *.Uni, *.UNI
 555
 556     <OutputFile>
 557         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 558         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 559
 560     <Command>
 561
 562 [Visual-Form-Representation-File.UEFI_HII]
 563     <InputFile>
 564         ?.vfr
 565         ?.Vfr
 566         ?.VFR
 567
 568     <ExtraDependency>
 569         $(MAKE_FILE)
 570
 571     <OutputFile>
 572         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
 573
 574     <Command>
 575         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 576         "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 577
 578 [Hii-Binary-Package.UEFI_HII]
 579     <InputFile>
 580         *.hpk
 581
 582     <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
 583         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
 584
 585     <OutputFile.XCODE, OutputFile.RVCT, OutputFile.ARMGCC>
 586         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 587
 588     <Command.MSFT, Command.INTEL>
 589         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 590         "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 591
 592     <Command.GCC>
 593         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 594         "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
 595
 596     <Command.XCODE, Command.RVCT, Command.ARMGCC, Command.ARMLINUXGCC>
 597         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
 598
 599