BaseTools/Conf/build_rule.template

   1 #
   2 #  Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR>
   3 #  Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12 #  Filename: build_rule.template
  13 #
  14
  15 ## Syntax
  16 #
  17 # "*" is used to indicate that the source files will be processed at the same time.
  18 # "?" is used to indicate that the source files will be processed one by one.
  19 #
  20 # "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
  21 #   <InputFile[.<ToolChainFamily>]> <EOL>
  22 #       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
  23 #
  24 #   <OutputFile[.<ToolChainFamily>]> <EOL>
  25 #       <FileFullPath>
  26 #
  27 #   <ExtraDependency>
  28 #       <FileFullPath>
  29 #
  30 #   <Command[.<ToolChainFamily>]> <EOL>
  31 #       <Command1>
  32 #       [<Command2>]
  33 #
  34 # <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
  35 # Missing <InputFile> will cause an exception and break build.
  36 # Missing <Command> will cause that related build target won't be generated but
  37 #   won't break build.
  38 #
  39
  40 ## Placeholders for string substitution
  41 #
  42 #   ${src}      Source file(s) to be built (full path)
  43 #   ${s_path}   Source file directory (absolute path)
  44 #   ${s_dir}    Source file relative directory within a module
  45 #               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
  46 #   ${s_name}   Source file name without path
  47 #   ${s_base}   Source file name without extension and path
  48 #   ${s_ext}    Source file extension
  49 #
  50 #   ${dst}      Destination file(s) built from ${src} (full path)
  51 #   ${d_path}   Destination file directory (absolute path)
  52 #   ${d_name}   Destination file name without path
  53 #   ${d_base}   Destination file name without extension and path
  54 #   ${d_ext}    Destination file extension
  55 #
  56 #   (+)         Directory separator
  57 #
  58
  59 ## Macro
  60 #   $(WORKSPACE)        Workspace directory
  61 #   $(OUTPUT_DIR)       Directory for intermediate files for building a module
  62 #   $(DEBUG_DIR)        Directory for files used to debug a module
  63 #   $(BUILD_DIR)        All files for building a platform will be put in this directory
  64 #   $(BIN_DIR)          Common directory for executable files
  65 #   $(FV_DIR)           Directory to store flash image files
  66 #   $(INC)              Search path of current module
  67 #   $(INC_LIST)         A file containing search pathes of current module
  68 #   $(LIBS)             Static library files of current module
  69 #   $(<tool>_FLAGS)     Tools flags of current module
  70 #   $(MODULE_NAME)      Current module name
  71 #   $(MODULE_TYPE)      Current module type
  72 #   $(MODULE_GUID)      Current module guid
  73 #   $(ARCH)             Architecture of current module
  74 #   $(TOOLCHAIN)        Toolchain used to build current module
  75 #   $(TARGET)           Target of current module (DEBUG/RELEASE)
  76 #   $(<tool>)           Path of tool
  77 #   $(EDK_TOOLS_PATH)   Path of build tools
  78 #   $(<FILE_TYPES>)     File list of each file type
  79 #                       (Note: The macro name is derived from file type name. For example,
  80 #                        C-Code-File will have C_CODE_FILES macro.)
  81 #   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
  82 #                       (
  83 #                        Note: The macro and file name are derived from file type name.
  84 #                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
  85 #                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
  86 #                        will be generated only when this macro is used in command line.
  87 #                        This is intended to get over the long command line limitation.
  88 #                       )
  89 #
  90 #   $(CP)     copy command
  91 #   $(MV)     move command
  92 #   $(RM)     delete command
  93 #   $(MD)     create dir command
  94 #   $(RD)     remove dir command
  95 #
  96
  97 ## Reserved File-Type
  98 #
  99 # Don't change following names of file types and their associated files,
 100 # which are also used in tools' code
 101 #
 102 #   C-Code-File
 103 #   C-Header-File
 104 #   Dynamic-Library-File
 105 #   Static-Library-File
 106 #   Visual-Form-Representation-File
 107 #   Unicode-Text-File
 108 #
 109
 110 [C-Code-File]
 111     <InputFile>
 112         ?.c
 113         ?.C
 114         ?.cc
 115         ?.CC
 116         ?.cpp
 117         ?.Cpp
 118         ?.CPP
 119
 120     <ExtraDependency>
 121         $(MAKE_FILE)
 122
 123     <OutputFile>
 124         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 125
 126     <Command.MSFT, Command.INTEL>
 127         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 128
 129     <Command.GCC, Command.RVCT>
 130         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 131         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 132         "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
 133
 134     <Command.ARMGCC>
 135         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 136
 137
 138 [C-Header-File]
 139     <InputFile>
 140         *.h, *.H
 141
 142     <OutputFile>
 143
 144     <Command>
 145
 146
 147 [Assembly-Code-File.COMMON.COMMON]
 148     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 149         ?.asm, ?.Asm, ?.ASM
 150
 151     <InputFile.GCC>
 152         ?.S, ?.s
 153
 154     <ExtraDependency>
 155         $(MAKE_FILE)
 156
 157     <OutputFile>
 158         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 159
 160     <Command.MSFT, Command.INTEL>
 161         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 162         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 163         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 164
 165     <Command.GCC, Command.RVCT>
 166         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 167         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 168         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 169         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 170
 171 [Assembly-Code-File.COMMON.IPF]
 172     <InputFile>
 173         ?.s
 174
 175     <ExtraDependency>
 176         $(MAKE_FILE)
 177
 178     <OutputFile>
 179         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 180
 181     <Command.MSFT, Command.INTEL>
 182         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 183         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 184         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 185         "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
 186
 187 [Visual-Form-Representation-File]
 188     <InputFile>
 189         ?.vfr
 190         ?.Vfr
 191         ?.VFR
 192
 193     <ExtraDependency>
 194         $(MAKE_FILE)
 195
 196     <OutputFile>
 197         $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
 198
 199     <Command>
 200         -$(MD) $(OUTPUT_DIR)(+)${s_dir} > NUL 2>&1
 201         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 202         -$(MD) ${d_path} > NUL 2>&1
 203         "$(VFR)" $(VFR_FLAGS) --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 204
 205 [Object-File]
 206     <InputFile>
 207         *.obj
 208         *.o
 209
 210     <OutputFile>
 211         $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
 212
 213     <Command.MSFT, Command.INTEL>
 214         "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
 215
 216     <Command.GCC>
 217         "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
 218
 219     <Command.RVCT>
 220         "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
 221
 222     <Command.RVCTCYGWIN, Command.ARMGCC>
 223         # $(OBJECT_FILES_LIST) has wrong paths for cygwin
 224         "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
 225
 226     <Command.XCODE>
 227         "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
 228
 229 [Static-Library-File]
 230     <InputFile>
 231         *.lib
 232
 233     <ExtraDependency>
 234         $(MAKE_FILE)
 235
 236     <OutputFile>
 237         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 238
 239     <Command.MSFT, Command.INTEL>
 240         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 241
 242     <Command.GCC>
 243         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)
 244         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 245
 246     <Command.ARMGCC>
 247         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -( $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) -) $(DLINK2_FLAGS)
 248
 249     <Command.RVCT>
 250         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 251
 252     <Command.RVCTCYGWIN>
 253         #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
 254         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 255
 256     <Command.XCODE>
 257         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 258
 259
 260 [Static-Library-File.USER_DEFINED]
 261     <InputFile>
 262         *.lib
 263
 264     <ExtraDependency>
 265         $(MAKE_FILE)
 266
 267     <OutputFile>
 268         $(DEBUG_DIR)(+)$(MODULE_NAME)
 269
 270     <Command.MSFT, Command.INTEL>
 271         "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 272
 273     <Command.GCC>
 274         "$(DLINK)" $(DLINK_FLAGS) -\( $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) -\) $(DLINK2_FLAGS)
 275
 276     <Command.ARMGCC>
 277         "$(DLINK)" $(DLINK_FLAGS) -( $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) -) $(DLINK2_FLAGS)
 278
 279     <Command.RVCT>
 280         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 281
 282     <Command.RVCTCYGWIN>
 283         #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
 284         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 285
 286     <Command.XCODE>
 287         "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 288
 289
 290 [Dynamic-Library-File]
 291     <InputFile>
 292         ?.dll
 293
 294     <OutputFile>
 295         $(DEBUG_DIR)(+)$(MODULE_NAME).efi
 296
 297     <Command.MSFT, Command.INTEL, Command.RVCT, Command.ARMGCC>
 298         GenFw -e $(MODULE_TYPE) -o ${dst} ${src}
 299         $(CP) ${dst} $(OUTPUT_DIR)
 300         $(CP) ${dst} $(BIN_DIR)
 301         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 302
 303     <Command.GCC>
 304         $(OBJCOPY) --only-keep-debug ${src} $(BIN_DIR)(+)$(MODULE_NAME).debug
 305         $(OBJCOPY) --strip-unneeded ${src}
 306         $(OBJCOPY) --add-gnu-debuglink=$(BIN_DIR)(+)$(MODULE_NAME).debug ${src}
 307         GenFw -e $(MODULE_TYPE) -o ${dst} ${src}
 308         $(CP) ${dst} $(OUTPUT_DIR)
 309         $(CP) ${dst} $(BIN_DIR)
 310         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 311
 312     <Command.XCODE>
 313         # tool to convert Mach-O to PE/COFF
 314         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 315         # create symbol file for GDB debug
 316         -$(DSYMUTIL) ${src}
 317         GenFw -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 318         $(CP) ${dst} $(OUTPUT_DIR)
 319         $(CP) ${dst} $(BIN_DIR)
 320         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 321
 322 [Dependency-Expression-File]
 323     <InputFile>
 324         ?.dxs, ?.Dxs, ?.DXS
 325
 326     <OutputFile>
 327         $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
 328
 329     <ExtraDependency>
 330         $(MAKE_FILE)
 331
 332     <Command>
 333         "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 334         Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 335         GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 336
 337 [Acpi-Source-Language-File]
 338     <InputFile>
 339         ?.asl, ?.Asl, ?.ASL
 340
 341     <OutputFile>
 342         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
 343
 344     <ExtraDependency>
 345         $(MAKE_FILE)
 346
 347     <Command.MSFT, Command.INTEL>
 348         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i ${src}
 349         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 350         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 351
 352     <Command.GCC>
 353         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i ${src}
 354         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 355         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 356
 357 [C-Code-File.AcpiTable]
 358     <InputFile>
 359         ?.c
 360
 361     <OutputFile>
 362         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 363
 364     <ExtraDependency>
 365         $(MAKE_FILE)
 366
 367     <Command.MSFT, Command.INTEL>
 368         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 369         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 370         GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll
 371
 372     <Command.GCC>
 373         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 374         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 375         GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll
 376
 377 [Acpi-Table-Code-File]
 378     <InputFile>
 379         ?.aslc, ?.act
 380
 381     <OutputFile>
 382         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 383
 384     <ExtraDependency>
 385         $(MAKE_FILE)
 386
 387     <Command.MSFT, Command.INTEL>
 388         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 389         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 390         GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll
 391
 392     <Command.GCC>
 393         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 394         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 395         GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll
 396
 397     <Command.XCODE>
 398         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
 399         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 400         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
 401         GenFw -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
 402
 403
 404 [Masm16-Code-File]
 405     <InputFile>
 406         ?.asm16, ?.Asm16, ?.ASM16
 407
 408     <ExtraDependency>
 409         $(MAKE_FILE)
 410
 411     <OutputFile>
 412         $(OUTPUT_DIR)(+)${s_base}.com
 413
 414     <Command.MSFT, Command.INTEL>
 415         cd $(OUTPUT_DIR)(+)${s_dir}
 416         "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${src}
 417         "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
 418
 419     <Command.GCC>
 420       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 421       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 422       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 423       "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -( $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj -)
 424
 425     <Command.XCODE>
 426       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 427       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 428       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 429       "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 430       otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
 431
 432
 433 [Microcode-File.USER_DEFINED, Microcode-File.Microcode]
 434     <InputFile>
 435         ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
 436
 437     <OutputFile>
 438         $(OUTPUT_DIR)(+)${s_base}.mcb
 439
 440     <Command>
 441         GenFw -o ${dst} -m ${src}
 442
 443 [Microcode-Binary-File]
 444     <InputFile>
 445         *.mcb
 446
 447     <ExtraDependency>
 448         $(MAKE_FILE)
 449
 450     <OutputFile>
 451         $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
 452
 453     <Command>
 454         GenFw -o ${dst} -j $(MICROCODE_BINARY_FILES)
 455         -$(CP) ${dst} $(BIN_DIR)
 456
 457 [EFI-Image-File]
 458     <InputFile>
 459         ?.efi, ?.Efi, ?.EFI
 460
 461     <OutputFile>
 462
 463     <Command>
 464
 465 [Unicode-Text-File]
 466     <InputFile>
 467         *.uni, *.Uni, *.UNI
 468
 469     <OutputFile>
 470         $(DEBUG_DIR)(+)AutoGen.c
 471         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 472
 473     <Command>
 474
 475 [Efi-Image.UEFI_OPTIONROM]
 476     <InputFile>
 477         ?.efi, ?.EFI, ?.Efi
 478
 479     <OutputFile>
 480         $(BIN_DIR)(+)$(MODULE_NAME).rom
 481
 482     <Command>
 483         $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
 484
 485 [Unicode-Text-File.UEFI_HII]
 486     <InputFile>
 487         *.uni, *.Uni, *.UNI
 488
 489     <OutputFile>
 490         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 491         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 492
 493     <Command>
 494
 495 [Visual-Form-Representation-File.UEFI_HII]
 496     <InputFile>
 497         ?.vfr
 498         ?.Vfr
 499         ?.VFR
 500
 501     <ExtraDependency>
 502         $(MAKE_FILE)
 503
 504     <OutputFile>
 505         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
 506
 507     <Command>
 508         -$(MD) $(OUTPUT_DIR)(+)${s_dir} > NUL 2>&1
 509         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 510         -$(MD) $(OUTPUT_DIR)(+)${s_dir} > NUL 2>&1
 511         "$(VFR)" $(VFR_FLAGS) --create-ifr-package --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 512
 513 [Hii-Binary-Package.UEFI_HII]
 514     <InputFile>
 515         *.hpk
 516
 517     <OutputFile>
 518         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
 519
 520     <Command.MSFT, Command.INTEL>
 521         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES)
 522         "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 523
 524     <Command.GCC>
 525         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
 526         "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}