BaseTools/Conf/build_rule.template

   1 #
   2 #  Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
   3 #  Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ## Syntax
  14 #
  15 # "*" is used to indicate that the source files will be processed at the same time.
  16 # "?" is used to indicate that the source files will be processed one by one.
  17 #
  18 # "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
  19 #   <InputFile[.<ToolChainFamily>]> <EOL>
  20 #       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
  21 #
  22 #   <OutputFile[.<ToolChainFamily>]> <EOL>
  23 #       <FileFullPath>
  24 #
  25 #   <ExtraDependency>
  26 #       <FileFullPath>
  27 #
  28 #   <Command[.<ToolChainFamily>]> <EOL>
  29 #       <Command1>
  30 #       [<Command2>]
  31 #
  32 # <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
  33 # Missing <InputFile> will cause an exception and break build.
  34 # Missing <Command> will cause that related build target won't be generated but
  35 #   won't break build.
  36 #
  37
  38 ## Placeholders for string substitution
  39 #
  40 #   ${src}      Source file(s) to be built (full path)
  41 #   ${s_path}   Source file directory (absolute path)
  42 #   ${s_dir}    Source file relative directory within a module
  43 #               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
  44 #   ${s_name}   Source file name without path
  45 #   ${s_base}   Source file name without extension and path
  46 #   ${s_ext}    Source file extension
  47 #
  48 #   ${dst}      Destination file(s) built from ${src} (full path)
  49 #   ${d_path}   Destination file directory (absolute path)
  50 #   ${d_name}   Destination file name without path
  51 #   ${d_base}   Destination file name without extension and path
  52 #   ${d_ext}    Destination file extension
  53 #
  54 #   (+)         Directory separator
  55 #
  56
  57 ## Macro
  58 #   $(WORKSPACE)        Workspace directory
  59 #   $(OUTPUT_DIR)       Directory for intermediate files for building a module
  60 #   $(DEBUG_DIR)        Directory for files used to debug a module
  61 #   $(BUILD_DIR)        All files for building a platform will be put in this directory
  62 #   $(BIN_DIR)          Common directory for executable files
  63 #   $(FV_DIR)           Directory to store flash image files
  64 #   $(INC)              Search path of current module
  65 #   $(INC_LIST)         A file containing search pathes of current module
  66 #   $(LIBS)             Static library files of current module
  67 #   $(<tool>_FLAGS)     Tools flags of current module
  68 #   $(MODULE_NAME)      Current module name
  69 #   $(MODULE_NAME_GUID) Current module name with module FILE_GUID if same $(MODULE_NAME) exists
  70 #                       in different modules, otherwise its value is same as $(MODULE_NAME)
  71 #   $(MODULE_TYPE)      Current module type
  72 #   $(MODULE_GUID)      Current module guid
  73 #   $(ARCH)             Architecture of current module
  74 #   $(TOOLCHAIN)        Toolchain used to build current module
  75 #   $(TARGET)           Target of current module (DEBUG/RELEASE)
  76 #   $(<tool>)           Path of tool
  77 #   $(EDK_TOOLS_PATH)   Path of build tools
  78 #   $(<FILE_TYPES>)     File list of each file type
  79 #                       (Note: The macro name is derived from file type name. For example,
  80 #                        C-Code-File will have C_CODE_FILES macro.)
  81 #   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
  82 #                       (
  83 #                        Note: The macro and file name are derived from file type name.
  84 #                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
  85 #                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
  86 #                        will be generated only when this macro is used in command line.
  87 #                        This is intended to get over the long command line limitation.
  88 #                       )
  89 #
  90 #   $(CP)     copy command
  91 #   $(MV)     move command
  92 #   $(RM)     delete command
  93 #   $(MD)     create dir command
  94 #   $(RD)     remove dir command
  95 #
  96
  97 ## Reserved File-Type
  98 #
  99 # Don't change following names of file types and their associated files,
 100 # which are also used in tools' code
 101 #
 102 #   C-Code-File
 103 #   C-Header-File
 104 #   Dynamic-Library-File
 105 #   Static-Library-File
 106 #   Visual-Form-Representation-File
 107 #   Unicode-Text-File
 108 #
 109
 110 ## Build Rule Version Number
 111 #  build_rule_version=0.1
 112 #
 113
 114 [C-Code-File]
 115     <InputFile>
 116         ?.c
 117         ?.C
 118         ?.cc
 119         ?.CC
 120         ?.cpp
 121         ?.Cpp
 122         ?.CPP
 123
 124     <ExtraDependency>
 125         $(MAKE_FILE)
 126
 127     <OutputFile>
 128         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 129
 130     <Command.MSFT, Command.INTEL>
 131         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 132
 133     <Command.GCC, Command.GCCLD, Command.RVCT>
 134         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 135         "$(CC)" $(CC_FLAGS) -c -o ${dst} $(INC) ${src}
 136
 137     <Command.XCODE>
 138         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 139
 140 [C-Code-File.COMMON.IPF]
 141     <InputFile>
 142         ?.c
 143         ?.C
 144         ?.cc
 145         ?.CC
 146         ?.cpp
 147         ?.Cpp
 148         ?.CPP
 149
 150     <ExtraDependency>
 151         $(MAKE_FILE)
 152
 153     <OutputFile>
 154         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 155
 156     <Command.MSFT, Command.INTEL>
 157         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 158
 159     <Command.GCC, Command.GCCLD, Command.RVCT>
 160         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 161         "$(CC)" $(CC_FLAGS) -c -o ${dst} $(INC) ${src}
 162         "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
 163
 164 [C-Code-File.BASE.AARCH64,C-Code-File.SEC.AARCH64,C-Code-File.PEI_CORE.AARCH64,C-Code-File.PEIM.AARCH64,C-Code-File.BASE.ARM,C-Code-File.SEC.ARM,C-Code-File.PEI_CORE.ARM,C-Code-File.PEIM.ARM]
 165     <InputFile>
 166         ?.c
 167
 168     <ExtraDependency>
 169         $(MAKE_FILE)
 170
 171     <OutputFile>
 172         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 173
 174     <Command.GCC, Command.GCCLD, Command.RVCT>
 175         "$(CC)" $(CC_FLAGS) $(CC_XIPFLAGS) -c -o ${dst} $(INC) ${src}
 176
 177 [C-Header-File]
 178     <InputFile>
 179         *.h, *.H
 180
 181     <OutputFile>
 182
 183     <Command>
 184
 185
 186 [Assembly-Code-File.COMMON.COMMON]
 187     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 188         ?.asm, ?.Asm, ?.ASM
 189
 190     <InputFile.GCC, InputFile.GCCLD>
 191         ?.S, ?.s
 192
 193     <ExtraDependency>
 194         $(MAKE_FILE)
 195
 196     <OutputFile>
 197         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 198
 199     <Command.MSFT, Command.INTEL>
 200         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 201         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 202         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 203
 204     <Command.GCC, Command.GCCLD, Command.RVCT>
 205         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 206         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 207         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 208         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 209
 210 [Nasm-Assembly-Code-File.COMMON.COMMON]
 211     <InputFile>
 212         ?.nasm
 213
 214     <ExtraDependency>
 215         $(MAKE_FILE)
 216
 217     <OutputFile>
 218         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 219
 220     <Command>
 221         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 222         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 223         "$(NASM)" -I${s_path}(+) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 224
 225 [Assembly-Code-File.COMMON.IPF]
 226     <InputFile>
 227         ?.s
 228
 229     <ExtraDependency>
 230         $(MAKE_FILE)
 231
 232     <OutputFile>
 233         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 234
 235     <Command.MSFT, Command.INTEL>
 236         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 237         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 238         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 239         "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
 240
 241 [Device-Tree-Source-File]
 242     <InputFile>
 243         ?.dts
 244
 245     <ExtraDependency>
 246         $(MAKE_FILE)
 247
 248     <OutputFile>
 249         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dtb
 250
 251     <Command.GCC>
 252         "$(PP)" $(DTCPP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 253         "$(DTC)" $(DTC_FLAGS) -I dts -O dtb -o ${dst} ${d_path}(+)${s_base}.i
 254
 255 [Visual-Form-Representation-File]
 256     <InputFile>
 257         ?.vfr
 258         ?.Vfr
 259         ?.VFR
 260
 261     <ExtraDependency>
 262         $(MAKE_FILE)
 263
 264     <OutputFile>
 265         $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
 266
 267     <Command>
 268         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
 269         "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
 270
 271 [Object-File]
 272     <InputFile>
 273         *.obj
 274         *.o
 275
 276     <OutputFile>
 277         $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
 278
 279     <Command.MSFT, Command.INTEL>
 280         "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
 281
 282     <Command.GCC, Command.GCCLD>
 283         "$(SLINK)" cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
 284
 285     <Command.RVCT>
 286         "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
 287
 288     <Command.RVCTCYGWIN>
 289         # $(OBJECT_FILES_LIST) has wrong paths for cygwin
 290         "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
 291
 292     <Command.XCODE>
 293         "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
 294
 295 [Static-Library-File]
 296     <InputFile>
 297         *.lib
 298
 299     <ExtraDependency>
 300         $(MAKE_FILE)
 301
 302     <OutputFile>
 303         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 304
 305     <Command.MSFT, Command.INTEL>
 306         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK2_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 307         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 308
 309     <Command.GCC>
 310         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(CC_FLAGS) $(DLINK2_FLAGS)
 311         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 312
 313     <Command.GCCLD>
 314         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 315         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 316
 317     <Command.RVCT>
 318         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 319
 320     <Command.RVCTCYGWIN>
 321         #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
 322         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 323
 324     <Command.XCODE>
 325         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 326
 327
 328 [Static-Library-File.SEC.AARCH64, Static-Library-File.PEI_CORE.AARCH64, Static-Library-File.PEIM.AARCH64,Static-Library-File.SEC.ARM, Static-Library-File.PEI_CORE.ARM, Static-Library-File.PEIM.ARM]
 329     <InputFile>
 330         *.lib
 331
 332     <ExtraDependency>
 333         $(MAKE_FILE)
 334
 335     <OutputFile>
 336         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 337
 338     <Command.GCC>
 339         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) $(DLINK_XIPFLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(CC_FLAGS) $(CC_XIPFLAGS) $(DLINK2_FLAGS)
 340         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 341
 342
 343 [Static-Library-File.USER_DEFINED]
 344     <InputFile>
 345         *.lib
 346
 347     <ExtraDependency>
 348         $(MAKE_FILE)
 349
 350     <OutputFile>
 351         $(DEBUG_DIR)(+)$(MODULE_NAME)
 352
 353     <Command.MSFT, Command.INTEL>
 354         "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 355
 356     <Command.GCC>
 357         "$(DLINK)" $(DLINK_FLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(DLINK2_FLAGS)
 358
 359     <Command.GCCLD>
 360         "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 361
 362     <Command.RVCT>
 363         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 364
 365     <Command.RVCTCYGWIN>
 366         #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
 367         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 368
 369     <Command.XCODE>
 370         "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 371
 372
 373 [Dynamic-Library-File]
 374     <InputFile>
 375         ?.dll
 376
 377     <OutputFile>
 378         $(DEBUG_DIR)(+)$(MODULE_NAME).efi
 379
 380     <Command.MSFT, Command.INTEL, Command.RVCT>
 381         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 382         $(CP) ${dst} $(OUTPUT_DIR)
 383         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 384         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 385         -$(CP) $(DEBUG_DIR)(+)*.pdb $(OUTPUT_DIR)
 386     <Command.GCC, Command.GCCLD>
 387         $(CP) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
 388         $(OBJCOPY) --strip-unneeded -R .eh_frame ${src}
 389
 390         #
 391         #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
 392         #
 393         -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
 394         -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)(+)$(MODULE_NAME_GUID).debug
 395
 396         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 397         $(CP) ${dst} $(OUTPUT_DIR)
 398         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 399         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 400
 401     <Command.XCODE>
 402         # tool to convert Mach-O to PE/COFF
 403         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 404         # create symbol file for GDB debug
 405         -$(DSYMUTIL) ${src}
 406         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
 407         $(CP) ${dst} $(OUTPUT_DIR)
 408         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 409         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 410
 411 [Dependency-Expression-File]
 412     <InputFile>
 413         ?.dxs, ?.Dxs, ?.DXS
 414
 415     <OutputFile>
 416         $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
 417
 418     <ExtraDependency>
 419         $(MAKE_FILE)
 420
 421     <Command>
 422         "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 423         Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 424         GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 425
 426 [Acpi-Source-Language-File]
 427     <InputFile>
 428         ?.asl, ?.Asl, ?.ASL
 429
 430     <OutputFile>
 431         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
 432
 433     <ExtraDependency>
 434         $(MAKE_FILE)
 435
 436     <Command.MSFT, Command.INTEL>
 437         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 438         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 439         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 440         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 441
 442     <Command.GCC, Command.GCCLD>
 443         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 444         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 445         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 446         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 447
 448 [C-Code-File.AcpiTable]
 449     <InputFile>
 450         ?.c
 451
 452     <OutputFile>
 453         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 454
 455     <ExtraDependency>
 456         $(MAKE_FILE)
 457
 458     <Command.MSFT, Command.INTEL>
 459         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 460         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 461         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 462
 463     <Command.GCC, Command.GCCLD>
 464         "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 465         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 466         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 467
 468 [Acpi-Table-Code-File]
 469     <InputFile>
 470         ?.aslc, ?.act
 471
 472     <OutputFile>
 473         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 474
 475     <ExtraDependency>
 476         $(MAKE_FILE)
 477
 478     <Command.MSFT, Command.INTEL>
 479         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 480         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 481         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 482
 483     <Command.GCC, Command.GCCLD>
 484         "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 485         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 486         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 487
 488     <Command.XCODE>
 489         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
 490         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 491         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
 492         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
 493
 494
 495 [Masm16-Code-File]
 496     <InputFile>
 497         ?.asm16, ?.Asm16, ?.ASM16, ?.s16, ?.S16
 498
 499     <ExtraDependency>
 500         $(MAKE_FILE)
 501
 502     <OutputFile>
 503         $(OUTPUT_DIR)(+)${s_base}.com
 504
 505     <Command.MSFT, Command.INTEL>
 506         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 507         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 508         cd $(OUTPUT_DIR)(+)${s_dir}
 509         "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
 510         "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
 511
 512     <Command.GCC, Command.GCCLD>
 513       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 514       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 515       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 516       "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
 517
 518     <Command.XCODE>
 519       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 520       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 521       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 522       "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 523       otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
 524
 525
 526 [Nasm-to-Binary-Code-File]
 527     <InputFile>
 528         ?.nasmb
 529
 530     <ExtraDependency>
 531         $(MAKE_FILE)
 532
 533     <OutputFile>
 534         $(OUTPUT_DIR)(+)${s_base}.bin
 535
 536     <Command>
 537         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 538         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 539         "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 540         # copy the output file with .com postfix that be same to the output file of .asm16
 541         $(CP) ${dst} $(OUTPUT_DIR)(+)${s_base}.com
 542
 543 [Microcode-File.USER_DEFINED, Microcode-File.Microcode]
 544     <InputFile>
 545         ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
 546
 547     <OutputFile>
 548         $(OUTPUT_DIR)(+)${s_base}.mcb
 549
 550     <Command>
 551         "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
 552
 553 [Microcode-Binary-File]
 554     <InputFile>
 555         *.mcb
 556
 557     <ExtraDependency>
 558         $(MAKE_FILE)
 559
 560     <OutputFile>
 561         $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
 562
 563     <Command>
 564         "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
 565         -$(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).bin
 566
 567 [EFI-Image-File]
 568     <InputFile>
 569         ?.efi, ?.Efi, ?.EFI
 570
 571     <OutputFile>
 572
 573     <Command>
 574
 575 [Unicode-Text-File]
 576     <InputFile>
 577         *.uni, *.Uni, *.UNI
 578
 579     <OutputFile>
 580         $(DEBUG_DIR)(+)AutoGen.c
 581         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 582         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 583
 584     <Command>
 585
 586 [Image-Definition-File]
 587     <InputFile>
 588         *.idf, *.Idf, *.IDF
 589
 590     <OutputFile>
 591         $(DEBUG_DIR)(+)AutoGen.c
 592         $(DEBUG_DIR)(+)$(MODULE_NAME)ImgDefs.h
 593         $(OUTPUT_DIR)(+)$(MODULE_NAME)Idf.hpk
 594
 595     <Command>
 596
 597 [Efi-Image.UEFI_OPTIONROM]
 598     <InputFile>
 599         ?.efi, ?.EFI, ?.Efi
 600
 601     <OutputFile>
 602         $(BIN_DIR)(+)$(MODULE_NAME_GUID).rom
 603
 604     <Command>
 605         $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
 606
 607 [Unicode-Text-File.UEFI_HII]
 608     <InputFile>
 609         *.uni, *.Uni, *.UNI
 610
 611     <OutputFile>
 612         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 613         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 614
 615     <Command>
 616
 617 [Image-Definition-File.UEFI_HII]
 618     <InputFile>
 619         *.idf, *.Idf, *.IDF
 620
 621     <OutputFile>
 622         $(DEBUG_DIR)(+)$(MODULE_NAME)ImgDefs.h
 623         $(OUTPUT_DIR)(+)$(MODULE_NAME)Idf.hpk
 624
 625     <Command>
 626
 627 [Visual-Form-Representation-File.UEFI_HII]
 628     <InputFile>
 629         ?.vfr
 630         ?.Vfr
 631         ?.VFR
 632
 633     <ExtraDependency>
 634         $(MAKE_FILE)
 635
 636     <OutputFile>
 637         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
 638
 639     <Command>
 640         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 641         "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 642
 643 [Hii-Binary-Package.UEFI_HII]
 644     <InputFile>
 645         *.hpk
 646
 647     <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
 648         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
 649
 650     <OutputFile.XCODE, OutputFile.RVCT>
 651         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 652
 653     <Command.MSFT, Command.INTEL>
 654         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 655         "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 656
 657     <Command.GCC, Command.GCCLD>
 658         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 659         "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
 660
 661     <Command.XCODE, Command.RVCT>
 662         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
 663
 664