BaseTools/Conf/build_rule.template

   1 #
   2 #  Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
   3 #  Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ## Syntax
  14 #
  15 # "*" is used to indicate that the source files will be processed at the same time.
  16 # "?" is used to indicate that the source files will be processed one by one.
  17 #
  18 # "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
  19 #   <InputFile[.<ToolChainFamily>]> <EOL>
  20 #       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
  21 #
  22 #   <OutputFile[.<ToolChainFamily>]> <EOL>
  23 #       <FileFullPath>
  24 #
  25 #   <ExtraDependency>
  26 #       <FileFullPath>
  27 #
  28 #   <Command[.<ToolChainFamily>]> <EOL>
  29 #       <Command1>
  30 #       [<Command2>]
  31 #
  32 # <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
  33 # Missing <InputFile> will cause an exception and break build.
  34 # Missing <Command> will cause that related build target won't be generated but
  35 #   won't break build.
  36 #
  37
  38 ## Placeholders for string substitution
  39 #
  40 #   ${src}      Source file(s) to be built (full path)
  41 #   ${s_path}   Source file directory (absolute path)
  42 #   ${s_dir}    Source file relative directory within a module
  43 #               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
  44 #   ${s_name}   Source file name without path
  45 #   ${s_base}   Source file name without extension and path
  46 #   ${s_ext}    Source file extension
  47 #
  48 #   ${dst}      Destination file(s) built from ${src} (full path)
  49 #   ${d_path}   Destination file directory (absolute path)
  50 #   ${d_name}   Destination file name without path
  51 #   ${d_base}   Destination file name without extension and path
  52 #   ${d_ext}    Destination file extension
  53 #
  54 #   (+)         Directory separator
  55 #
  56
  57 ## Macro
  58 #   $(WORKSPACE)        Workspace directory
  59 #   $(OUTPUT_DIR)       Directory for intermediate files for building a module
  60 #   $(DEBUG_DIR)        Directory for files used to debug a module
  61 #   $(BUILD_DIR)        All files for building a platform will be put in this directory
  62 #   $(BIN_DIR)          Common directory for executable files
  63 #   $(FV_DIR)           Directory to store flash image files
  64 #   $(INC)              Search path of current module
  65 #   $(INC_LIST)         A file containing search pathes of current module
  66 #   $(LIBS)             Static library files of current module
  67 #   $(<tool>_FLAGS)     Tools flags of current module
  68 #   $(MODULE_NAME)      Current module name
  69 #   $(MODULE_NAME_GUID) Current module name with module FILE_GUID if same $(MODULE_NAME) exists
  70 #                       in different modules, otherwise its value is same as $(MODULE_NAME)
  71 #   $(MODULE_TYPE)      Current module type
  72 #   $(MODULE_GUID)      Current module guid
  73 #   $(ARCH)             Architecture of current module
  74 #   $(TOOLCHAIN)        Toolchain used to build current module
  75 #   $(TARGET)           Target of current module (DEBUG/RELEASE)
  76 #   $(<tool>)           Path of tool
  77 #   $(EDK_TOOLS_PATH)   Path of build tools
  78 #   $(<FILE_TYPES>)     File list of each file type
  79 #                       (Note: The macro name is derived from file type name. For example,
  80 #                        C-Code-File will have C_CODE_FILES macro.)
  81 #   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
  82 #                       (
  83 #                        Note: The macro and file name are derived from file type name.
  84 #                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
  85 #                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
  86 #                        will be generated only when this macro is used in command line.
  87 #                        This is intended to get over the long command line limitation.
  88 #                       )
  89 #
  90 #   $(CP)     copy command
  91 #   $(MV)     move command
  92 #   $(RM)     delete command
  93 #   $(MD)     create dir command
  94 #   $(RD)     remove dir command
  95 #
  96
  97 ## Reserved File-Type
  98 #
  99 # Don't change following names of file types and their associated files,
 100 # which are also used in tools' code
 101 #
 102 #   C-Code-File
 103 #   C-Header-File
 104 #   Dynamic-Library-File
 105 #   Static-Library-File
 106 #   Visual-Form-Representation-File
 107 #   Unicode-Text-File
 108 #
 109
 110 ## Build Rule Version Number
 111 #  build_rule_version=0.1
 112 #
 113
 114 [C-Code-File]
 115     <InputFile>
 116         ?.c
 117         ?.C
 118         ?.cc
 119         ?.CC
 120         ?.cpp
 121         ?.Cpp
 122         ?.CPP
 123
 124     <ExtraDependency>
 125         $(MAKE_FILE)
 126
 127     <OutputFile>
 128         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 129
 130     <Command.MSFT, Command.INTEL>
 131         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 132
 133     <Command.GCC, Command.GCCLD, Command.RVCT>
 134         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 135         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 136
 137     <Command.XCODE>
 138         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 139
 140 [C-Code-File.COMMON.IPF]
 141     <InputFile>
 142         ?.c
 143         ?.C
 144         ?.cc
 145         ?.CC
 146         ?.cpp
 147         ?.Cpp
 148         ?.CPP
 149
 150     <ExtraDependency>
 151         $(MAKE_FILE)
 152
 153     <OutputFile>
 154         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 155
 156     <Command.MSFT, Command.INTEL>
 157         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 158
 159     <Command.GCC, Command.GCCLD, Command.RVCT>
 160         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 161         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 162         "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
 163
 164 [C-Code-File.BASE.AARCH64,C-Code-File.SEC.AARCH64,C-Code-File.PEI_CORE.AARCH64,C-Code-File.PEIM.AARCH64]
 165     <InputFile>
 166         ?.c
 167
 168     <ExtraDependency>
 169         $(MAKE_FILE)
 170
 171     <OutputFile>
 172         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 173
 174     <Command.GCC, Command.GCCLD>
 175         "$(CC)" $(CC_FLAGS) $(CC_XIPFLAGS) -o ${dst} $(INC) ${src}
 176
 177 [C-Header-File]
 178     <InputFile>
 179         *.h, *.H
 180
 181     <OutputFile>
 182
 183     <Command>
 184
 185
 186 [Assembly-Code-File.COMMON.COMMON]
 187     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 188         ?.asm, ?.Asm, ?.ASM
 189
 190     <InputFile.GCC, InputFile.GCCLD>
 191         ?.S, ?.s
 192
 193     <ExtraDependency>
 194         $(MAKE_FILE)
 195
 196     <OutputFile>
 197         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 198
 199     <Command.MSFT, Command.INTEL>
 200         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 201         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 202         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 203
 204     <Command.GCC, Command.GCCLD, Command.RVCT>
 205         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 206         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 207         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 208         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 209
 210 [Nasm-Assembly-Code-File.COMMON.COMMON]
 211     <InputFile>
 212         ?.nasm
 213
 214     <ExtraDependency>
 215         $(MAKE_FILE)
 216
 217     <OutputFile>
 218         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 219
 220     <Command>
 221         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 222         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 223         "$(NASM)" -I${s_path}(+) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 224
 225 [Assembly-Code-File.COMMON.IPF]
 226     <InputFile>
 227         ?.s
 228
 229     <ExtraDependency>
 230         $(MAKE_FILE)
 231
 232     <OutputFile>
 233         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 234
 235     <Command.MSFT, Command.INTEL>
 236         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 237         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 238         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 239         "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
 240
 241 [Visual-Form-Representation-File]
 242     <InputFile>
 243         ?.vfr
 244         ?.Vfr
 245         ?.VFR
 246
 247     <ExtraDependency>
 248         $(MAKE_FILE)
 249
 250     <OutputFile>
 251         $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
 252
 253     <Command>
 254         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
 255         "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
 256
 257 [Object-File]
 258     <InputFile>
 259         *.obj
 260         *.o
 261
 262     <OutputFile>
 263         $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
 264
 265     <Command.MSFT, Command.INTEL>
 266         "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
 267
 268     <Command.GCC, Command.GCCLD>
 269         "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
 270
 271     <Command.RVCT>
 272         "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
 273
 274     <Command.RVCTCYGWIN>
 275         # $(OBJECT_FILES_LIST) has wrong paths for cygwin
 276         "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
 277
 278     <Command.XCODE>
 279         "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
 280
 281 [Static-Library-File]
 282     <InputFile>
 283         *.lib
 284
 285     <ExtraDependency>
 286         $(MAKE_FILE)
 287
 288     <OutputFile>
 289         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 290
 291     <Command.MSFT, Command.INTEL>
 292         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 293
 294     <Command.GCC>
 295         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(DLINK2_FLAGS)
 296         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 297
 298     <Command.GCCLD>
 299         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 300         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 301
 302     <Command.RVCT>
 303         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 304
 305     <Command.RVCTCYGWIN>
 306         #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
 307         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 308
 309     <Command.XCODE>
 310         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 311
 312
 313 [Static-Library-File.USER_DEFINED]
 314     <InputFile>
 315         *.lib
 316
 317     <ExtraDependency>
 318         $(MAKE_FILE)
 319
 320     <OutputFile>
 321         $(DEBUG_DIR)(+)$(MODULE_NAME)
 322
 323     <Command.MSFT, Command.INTEL>
 324         "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 325
 326     <Command.GCC>
 327         "$(DLINK)" $(DLINK_FLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(DLINK2_FLAGS)
 328
 329     <Command.GCCLD>
 330         "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 331
 332     <Command.RVCT>
 333         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 334
 335     <Command.RVCTCYGWIN>
 336         #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
 337         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 338
 339     <Command.XCODE>
 340         "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 341
 342
 343 [Dynamic-Library-File]
 344     <InputFile>
 345         ?.dll
 346
 347     <OutputFile>
 348         $(DEBUG_DIR)(+)$(MODULE_NAME).efi
 349
 350     <Command.MSFT, Command.INTEL, Command.RVCT>
 351         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 352         $(CP) ${dst} $(OUTPUT_DIR)
 353         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 354         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 355         -$(CP) $(DEBUG_DIR)(+)*.pdb $(OUTPUT_DIR)
 356     <Command.GCC, Command.GCCLD>
 357         $(CP) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
 358         $(OBJCOPY) --strip-unneeded -R .eh_frame ${src}
 359
 360         #
 361         #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
 362         #
 363         -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
 364         -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)(+)$(MODULE_NAME_GUID).debug
 365
 366         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 367         $(CP) ${dst} $(OUTPUT_DIR)
 368         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 369         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 370
 371     <Command.XCODE>
 372         # tool to convert Mach-O to PE/COFF
 373         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 374         # create symbol file for GDB debug
 375         -$(DSYMUTIL) ${src}
 376         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
 377         $(CP) ${dst} $(OUTPUT_DIR)
 378         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 379         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 380
 381 [Dependency-Expression-File]
 382     <InputFile>
 383         ?.dxs, ?.Dxs, ?.DXS
 384
 385     <OutputFile>
 386         $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
 387
 388     <ExtraDependency>
 389         $(MAKE_FILE)
 390
 391     <Command>
 392         "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 393         Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 394         GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 395
 396 [Acpi-Source-Language-File]
 397     <InputFile>
 398         ?.asl, ?.Asl, ?.ASL
 399
 400     <OutputFile>
 401         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
 402
 403     <ExtraDependency>
 404         $(MAKE_FILE)
 405
 406     <Command.MSFT, Command.INTEL>
 407         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 408         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 409         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 410         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 411
 412     <Command.GCC, Command.GCCLD>
 413         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 414         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 415         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 416         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 417
 418 [C-Code-File.AcpiTable]
 419     <InputFile>
 420         ?.c
 421
 422     <OutputFile>
 423         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 424
 425     <ExtraDependency>
 426         $(MAKE_FILE)
 427
 428     <Command.MSFT, Command.INTEL>
 429         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 430         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 431         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 432
 433     <Command.GCC, Command.GCCLD>
 434         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 435         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 436         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 437
 438 [Acpi-Table-Code-File]
 439     <InputFile>
 440         ?.aslc, ?.act
 441
 442     <OutputFile>
 443         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 444
 445     <ExtraDependency>
 446         $(MAKE_FILE)
 447
 448     <Command.MSFT, Command.INTEL>
 449         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 450         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 451         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 452
 453     <Command.GCC, Command.GCCLD>
 454         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 455         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 456         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 457
 458     <Command.XCODE>
 459         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
 460         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 461         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
 462         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
 463
 464
 465 [Masm16-Code-File]
 466     <InputFile>
 467         ?.asm16, ?.Asm16, ?.ASM16, ?.s16, ?.S16
 468
 469     <ExtraDependency>
 470         $(MAKE_FILE)
 471
 472     <OutputFile>
 473         $(OUTPUT_DIR)(+)${s_base}.com
 474
 475     <Command.MSFT, Command.INTEL>
 476         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 477         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 478         cd $(OUTPUT_DIR)(+)${s_dir}
 479         "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
 480         "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
 481
 482     <Command.GCC, Command.GCCLD>
 483       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 484       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 485       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 486       "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
 487
 488     <Command.XCODE>
 489       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 490       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 491       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 492       "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 493       otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
 494
 495
 496 [Nasm-to-Binary-Code-File]
 497     <InputFile>
 498         ?.nasmb
 499
 500     <ExtraDependency>
 501         $(MAKE_FILE)
 502
 503     <OutputFile>
 504         $(OUTPUT_DIR)(+)${s_base}.bin
 505
 506     <Command>
 507         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 508         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 509         "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 510         # copy the output file with .com postfix that be same to the output file of .asm16
 511         $(CP) ${dst} $(OUTPUT_DIR)(+)${s_base}.com
 512
 513 [Microcode-File.USER_DEFINED, Microcode-File.Microcode]
 514     <InputFile>
 515         ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
 516
 517     <OutputFile>
 518         $(OUTPUT_DIR)(+)${s_base}.mcb
 519
 520     <Command>
 521         "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
 522
 523 [Microcode-Binary-File]
 524     <InputFile>
 525         *.mcb
 526
 527     <ExtraDependency>
 528         $(MAKE_FILE)
 529
 530     <OutputFile>
 531         $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
 532
 533     <Command>
 534         "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
 535         -$(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).bin
 536
 537 [EFI-Image-File]
 538     <InputFile>
 539         ?.efi, ?.Efi, ?.EFI
 540
 541     <OutputFile>
 542
 543     <Command>
 544
 545 [Unicode-Text-File]
 546     <InputFile>
 547         *.uni, *.Uni, *.UNI
 548
 549     <OutputFile>
 550         $(DEBUG_DIR)(+)AutoGen.c
 551         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 552         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 553
 554     <Command>
 555
 556 [Efi-Image.UEFI_OPTIONROM]
 557     <InputFile>
 558         ?.efi, ?.EFI, ?.Efi
 559
 560     <OutputFile>
 561         $(BIN_DIR)(+)$(MODULE_NAME_GUID).rom
 562
 563     <Command>
 564         $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
 565
 566 [Unicode-Text-File.UEFI_HII]
 567     <InputFile>
 568         *.uni, *.Uni, *.UNI
 569
 570     <OutputFile>
 571         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 572         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 573
 574     <Command>
 575
 576 [Visual-Form-Representation-File.UEFI_HII]
 577     <InputFile>
 578         ?.vfr
 579         ?.Vfr
 580         ?.VFR
 581
 582     <ExtraDependency>
 583         $(MAKE_FILE)
 584
 585     <OutputFile>
 586         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
 587
 588     <Command>
 589         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 590         "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 591
 592 [Hii-Binary-Package.UEFI_HII]
 593     <InputFile>
 594         *.hpk
 595
 596     <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
 597         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
 598
 599     <OutputFile.XCODE, OutputFile.RVCT>
 600         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 601
 602     <Command.MSFT, Command.INTEL>
 603         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 604         "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 605
 606     <Command.GCC, Command.GCCLD>
 607         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 608         "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
 609
 610     <Command.XCODE, Command.RVCT>
 611         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
 612
 613