BaseTools/Conf/build_rule.template

   1 #
   2 #  Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
   3 #  Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ## Syntax
  14 #
  15 # "*" is used to indicate that the source files will be processed at the same time.
  16 # "?" is used to indicate that the source files will be processed one by one.
  17 #
  18 # "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
  19 #   <InputFile[.<ToolChainFamily>]> <EOL>
  20 #       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
  21 #
  22 #   <OutputFile[.<ToolChainFamily>]> <EOL>
  23 #       <FileFullPath>
  24 #
  25 #   <ExtraDependency>
  26 #       <FileFullPath>
  27 #
  28 #   <Command[.<ToolChainFamily>]> <EOL>
  29 #       <Command1>
  30 #       [<Command2>]
  31 #
  32 # <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
  33 # Missing <InputFile> will cause an exception and break build.
  34 # Missing <Command> will cause that related build target won't be generated but
  35 #   won't break build.
  36 #
  37
  38 ## Placeholders for string substitution
  39 #
  40 #   ${src}      Source file(s) to be built (full path)
  41 #   ${s_path}   Source file directory (absolute path)
  42 #   ${s_dir}    Source file relative directory within a module
  43 #               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
  44 #   ${s_name}   Source file name without path
  45 #   ${s_base}   Source file name without extension and path
  46 #   ${s_ext}    Source file extension
  47 #
  48 #   ${dst}      Destination file(s) built from ${src} (full path)
  49 #   ${d_path}   Destination file directory (absolute path)
  50 #   ${d_name}   Destination file name without path
  51 #   ${d_base}   Destination file name without extension and path
  52 #   ${d_ext}    Destination file extension
  53 #
  54 #   (+)         Directory separator
  55 #
  56
  57 ## Macro
  58 #   $(WORKSPACE)        Workspace directory
  59 #   $(OUTPUT_DIR)       Directory for intermediate files for building a module
  60 #   $(DEBUG_DIR)        Directory for files used to debug a module
  61 #   $(BUILD_DIR)        All files for building a platform will be put in this directory
  62 #   $(BIN_DIR)          Common directory for executable files
  63 #   $(FV_DIR)           Directory to store flash image files
  64 #   $(INC)              Search path of current module
  65 #   $(INC_LIST)         A file containing search pathes of current module
  66 #   $(LIBS)             Static library files of current module
  67 #   $(<tool>_FLAGS)     Tools flags of current module
  68 #   $(MODULE_NAME)      Current module name
  69 #   $(MODULE_TYPE)      Current module type
  70 #   $(MODULE_GUID)      Current module guid
  71 #   $(ARCH)             Architecture of current module
  72 #   $(TOOLCHAIN)        Toolchain used to build current module
  73 #   $(TARGET)           Target of current module (DEBUG/RELEASE)
  74 #   $(<tool>)           Path of tool
  75 #   $(EDK_TOOLS_PATH)   Path of build tools
  76 #   $(<FILE_TYPES>)     File list of each file type
  77 #                       (Note: The macro name is derived from file type name. For example,
  78 #                        C-Code-File will have C_CODE_FILES macro.)
  79 #   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
  80 #                       (
  81 #                        Note: The macro and file name are derived from file type name.
  82 #                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
  83 #                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
  84 #                        will be generated only when this macro is used in command line.
  85 #                        This is intended to get over the long command line limitation.
  86 #                       )
  87 #
  88 #   $(CP)     copy command
  89 #   $(MV)     move command
  90 #   $(RM)     delete command
  91 #   $(MD)     create dir command
  92 #   $(RD)     remove dir command
  93 #
  94
  95 ## Reserved File-Type
  96 #
  97 # Don't change following names of file types and their associated files,
  98 # which are also used in tools' code
  99 #
 100 #   C-Code-File
 101 #   C-Header-File
 102 #   Dynamic-Library-File
 103 #   Static-Library-File
 104 #   Visual-Form-Representation-File
 105 #   Unicode-Text-File
 106 #
 107
 108 ## Build Rule Version Number
 109 #  build_rule_version=0.1
 110 #
 111
 112 [C-Code-File]
 113     <InputFile>
 114         ?.c
 115         ?.C
 116         ?.cc
 117         ?.CC
 118         ?.cpp
 119         ?.Cpp
 120         ?.CPP
 121
 122     <ExtraDependency>
 123         $(MAKE_FILE)
 124
 125     <OutputFile>
 126         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 127
 128     <Command.MSFT, Command.INTEL>
 129         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 130
 131     <Command.GCC, Command.RVCT>
 132         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 133         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 134
 135     <Command.ARMGCC, Command.ARMLINUXGCC, command.XCODE>
 136         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 137
 138 [C-Code-File.COMMON.IPF]
 139     <InputFile>
 140         ?.c
 141         ?.C
 142         ?.cc
 143         ?.CC
 144         ?.cpp
 145         ?.Cpp
 146         ?.CPP
 147
 148     <ExtraDependency>
 149         $(MAKE_FILE)
 150
 151     <OutputFile>
 152         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 153
 154     <Command.MSFT, Command.INTEL>
 155         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 156
 157     <Command.GCC, Command.RVCT>
 158         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 159         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 160         "$(SYMRENAME)" $(SYMRENAME_FLAGS) ${dst}
 161
 162 [C-Header-File]
 163     <InputFile>
 164         *.h, *.H
 165
 166     <OutputFile>
 167
 168     <Command>
 169
 170
 171 [Assembly-Code-File.COMMON.COMMON]
 172     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 173         ?.asm, ?.Asm, ?.ASM
 174
 175     <InputFile.GCC>
 176         ?.S, ?.s
 177
 178     <ExtraDependency>
 179         $(MAKE_FILE)
 180
 181     <OutputFile>
 182         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 183
 184     <Command.MSFT, Command.INTEL>
 185         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 186         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 187         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 188
 189     <Command.GCC, Command.RVCT>
 190         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 191         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 192         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 193         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 194
 195 [Nasm-Assembly-Code-File.COMMON.COMMON]
 196     <InputFile>
 197         ?.nasm
 198
 199     <ExtraDependency>
 200         $(MAKE_FILE)
 201
 202     <OutputFile>
 203         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 204
 205     <Command>
 206         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 207         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 208         "$(NASM)" -I${s_path}(+) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 209
 210 [Assembly-Code-File.COMMON.IPF]
 211     <InputFile>
 212         ?.s
 213
 214     <ExtraDependency>
 215         $(MAKE_FILE)
 216
 217     <OutputFile>
 218         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 219
 220     <Command.MSFT, Command.INTEL>
 221         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 222         Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 223         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 224         "$(ASM)" $(ASM_FLAGS) -o ${dst} ${d_path}(+)${s_base}.iii
 225
 226 [Visual-Form-Representation-File]
 227     <InputFile>
 228         ?.vfr
 229         ?.Vfr
 230         ?.VFR
 231
 232     <ExtraDependency>
 233         $(MAKE_FILE)
 234
 235     <OutputFile>
 236         $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
 237
 238     <Command>
 239         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
 240         "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
 241
 242 [Object-File]
 243     <InputFile>
 244         *.obj
 245         *.o
 246
 247     <OutputFile>
 248         $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
 249
 250     <Command.MSFT, Command.INTEL>
 251         "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
 252
 253     <Command.GCC>
 254         "$(SLINK)" -cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
 255
 256     <Command.RVCT>
 257         "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
 258
 259     <Command.RVCTCYGWIN, Command.ARMGCC, Command.ARMLINUXGCC>
 260         # $(OBJECT_FILES_LIST) has wrong paths for cygwin
 261         "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
 262
 263     <Command.XCODE>
 264         "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
 265
 266 [Static-Library-File]
 267     <InputFile>
 268         *.lib
 269
 270     <ExtraDependency>
 271         $(MAKE_FILE)
 272
 273     <OutputFile>
 274         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 275
 276     <Command.MSFT, Command.INTEL>
 277         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 278
 279     <Command.GCC>
 280         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 281         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 282
 283     <Command.ARMGCC, Command.ARMLINUXGCC>
 284         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) --end-group $(DLINK2_FLAGS)
 285
 286     <Command.RVCT>
 287         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 288
 289     <Command.RVCTCYGWIN>
 290         #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
 291         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 292
 293     <Command.XCODE>
 294         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 295
 296
 297 [Static-Library-File.USER_DEFINED]
 298     <InputFile>
 299         *.lib
 300
 301     <ExtraDependency>
 302         $(MAKE_FILE)
 303
 304     <OutputFile>
 305         $(DEBUG_DIR)(+)$(MODULE_NAME)
 306
 307     <Command.MSFT, Command.INTEL>
 308         "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 309
 310     <Command.GCC>
 311         "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 312
 313     <Command.ARMGCC, Command.ARMLINUXGCC>
 314         "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) --end-group $(DLINK2_FLAGS)
 315
 316     <Command.RVCT>
 317         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 318
 319     <Command.RVCTCYGWIN>
 320         #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
 321         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 322
 323     <Command.XCODE>
 324         "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 325
 326
 327 [Dynamic-Library-File]
 328     <InputFile>
 329         ?.dll
 330
 331     <OutputFile>
 332         $(DEBUG_DIR)(+)$(MODULE_NAME).efi
 333
 334     <Command.MSFT, Command.INTEL, Command.RVCT, Command.ARMGCC, Command.ARMLINUXGCC>
 335         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 336         $(CP) ${dst} $(OUTPUT_DIR)
 337         $(CP) ${dst} $(BIN_DIR)
 338         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 339         -$(CP) $(DEBUG_DIR)(+)*.pdb $(OUTPUT_DIR)
 340     <Command.GCC>
 341         $(CP) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
 342         $(OBJCOPY) --strip-unneeded -R .eh_frame ${src}
 343
 344         #
 345         #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
 346         #
 347         -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
 348         -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)
 349
 350         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 351         $(CP) ${dst} $(OUTPUT_DIR)
 352         $(CP) ${dst} $(BIN_DIR)
 353         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 354
 355     <Command.XCODE>
 356         # tool to convert Mach-O to PE/COFF
 357         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 358         # create symbol file for GDB debug
 359         -$(DSYMUTIL) ${src}
 360         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
 361         $(CP) ${dst} $(OUTPUT_DIR)
 362         $(CP) ${dst} $(BIN_DIR)
 363         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 364
 365 [Dependency-Expression-File]
 366     <InputFile>
 367         ?.dxs, ?.Dxs, ?.DXS
 368
 369     <OutputFile>
 370         $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
 371
 372     <ExtraDependency>
 373         $(MAKE_FILE)
 374
 375     <Command>
 376         "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 377         Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 378         GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 379
 380 [Acpi-Source-Language-File]
 381     <InputFile>
 382         ?.asl, ?.Asl, ?.ASL
 383
 384     <OutputFile>
 385         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
 386
 387     <ExtraDependency>
 388         $(MAKE_FILE)
 389
 390     <Command.MSFT, Command.INTEL>
 391         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 392         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 393         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 394         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 395
 396     <Command.GCC>
 397         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 398         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 399         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 400         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 401
 402 [C-Code-File.AcpiTable]
 403     <InputFile>
 404         ?.c
 405
 406     <OutputFile>
 407         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 408
 409     <ExtraDependency>
 410         $(MAKE_FILE)
 411
 412     <Command.MSFT, Command.INTEL>
 413         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 414         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 415         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 416
 417     <Command.GCC>
 418         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 419         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 420         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 421
 422 [Acpi-Table-Code-File]
 423     <InputFile>
 424         ?.aslc, ?.act
 425
 426     <OutputFile>
 427         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 428
 429     <ExtraDependency>
 430         $(MAKE_FILE)
 431
 432     <Command.MSFT, Command.INTEL>
 433         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 434         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 435         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 436
 437     <Command.GCC>
 438         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 439         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 440         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 441
 442     <Command.XCODE>
 443         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
 444         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 445         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi
 446         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.efi $(GENFW_FLAGS)
 447
 448
 449 [Masm16-Code-File]
 450     <InputFile>
 451         ?.asm16, ?.Asm16, ?.ASM16, ?.s16, ?.S16
 452
 453     <ExtraDependency>
 454         $(MAKE_FILE)
 455
 456     <OutputFile>
 457         $(OUTPUT_DIR)(+)${s_base}.com
 458
 459     <Command.MSFT, Command.INTEL>
 460         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 461         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 462         cd $(OUTPUT_DIR)(+)${s_dir}
 463         "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
 464         "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
 465
 466     <Command.GCC>
 467       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 468       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 469       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 470       "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
 471
 472     <Command.XCODE>
 473       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 474       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 475       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 476       "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 477       otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
 478
 479
 480 [Nasm-to-Binary-Code-File]
 481     <InputFile>
 482         ?.nasmb
 483
 484     <ExtraDependency>
 485         $(MAKE_FILE)
 486
 487     <OutputFile>
 488         $(OUTPUT_DIR)(+)${s_base}.bin
 489
 490     <Command>
 491         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 492         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 493         "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 494
 495
 496 [Microcode-File.USER_DEFINED, Microcode-File.Microcode]
 497     <InputFile>
 498         ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
 499
 500     <OutputFile>
 501         $(OUTPUT_DIR)(+)${s_base}.mcb
 502
 503     <Command>
 504         "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
 505
 506 [Microcode-Binary-File]
 507     <InputFile>
 508         *.mcb
 509
 510     <ExtraDependency>
 511         $(MAKE_FILE)
 512
 513     <OutputFile>
 514         $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
 515
 516     <Command>
 517         "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
 518         -$(CP) ${dst} $(BIN_DIR)
 519
 520 [EFI-Image-File]
 521     <InputFile>
 522         ?.efi, ?.Efi, ?.EFI
 523
 524     <OutputFile>
 525
 526     <Command>
 527
 528 [Unicode-Text-File]
 529     <InputFile>
 530         *.uni, *.Uni, *.UNI
 531
 532     <OutputFile>
 533         $(DEBUG_DIR)(+)AutoGen.c
 534         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 535         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 536
 537     <Command>
 538
 539 [Efi-Image.UEFI_OPTIONROM]
 540     <InputFile>
 541         ?.efi, ?.EFI, ?.Efi
 542
 543     <OutputFile>
 544         $(BIN_DIR)(+)$(MODULE_NAME).rom
 545
 546     <Command>
 547         $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
 548
 549 [Unicode-Text-File.UEFI_HII]
 550     <InputFile>
 551         *.uni, *.Uni, *.UNI
 552
 553     <OutputFile>
 554         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 555         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 556
 557     <Command>
 558
 559 [Visual-Form-Representation-File.UEFI_HII]
 560     <InputFile>
 561         ?.vfr
 562         ?.Vfr
 563         ?.VFR
 564
 565     <ExtraDependency>
 566         $(MAKE_FILE)
 567
 568     <OutputFile>
 569         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
 570
 571     <Command>
 572         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 573         "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 574
 575 [Hii-Binary-Package.UEFI_HII]
 576     <InputFile>
 577         *.hpk
 578
 579     <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
 580         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
 581
 582     <OutputFile.XCODE, OutputFile.RVCT, OutputFile.ARMGCC>
 583         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 584
 585     <Command.MSFT, Command.INTEL>
 586         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 587         "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 588
 589     <Command.GCC>
 590         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 591         "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
 592
 593     <Command.XCODE, Command.RVCT, Command.ARMGCC, Command.ARMLINUXGCC>
 594         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
 595
 596