BaseTools/Source/Python/Ecc/config.ini

   1 ## @file
   2 # This file is used to set configuration of ECC tool
   3 # For the items listed below, 1 means valid, 0 means invalid
   4 #
   5 # Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
   6 # This program and the accompanying materials
   7 # are licensed and made available under the terms and conditions of the BSD License
   8 # which accompanies this distribution.  The full text of the license may be found at
   9 # http://opensource.org/licenses/bsd-license.php
  10 #
  11 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14
  15 #
  16 # Identify the version of current configuration
  17 #
  18 Version = 0.1
  19
  20 #
  21 # Identify to if check all items
  22 # 1 - Check all items and ignore all other detailed items
  23 # 0 - Not check all items, the tool will go through all other detailed items to decide to check or not
  24 #
  25 CheckAll = 0
  26
  27 #
  28 # Identify to if automatically correct mistakes
  29 # 1 - Automatically correct
  30 # 0 - Not automatically correct
  31 # Only the following check points can be automatically corrected, others not listed below are not supported even it is 1
  32 #
  33 # GeneralCheckTab
  34 # GeneralCheckIndentation
  35 # GeneralCheckLine
  36 # GeneralCheckCarriageReturn
  37 # SpaceCheckAll
  38 #
  39 AutoCorrect = 1
  40
  41 #
  42 # List customized Modifer here, split with ','
  43 #
  44 ModifierList = IN, OUT, OPTIONAL, UNALIGNED, EFI_RUNTIMESERVICE, EFI_BOOTSERVICE, EFIAPI, TPMINTERNALAPI, STATIC
  45
  46 #
  47 # General Checking
  48 #
  49 GeneralCheckAll = 0
  50
  51 # Check whether NO Tab is used, replaced with spaces
  52 GeneralCheckNoTab = 1
  53 # The width of Tab
  54 GeneralCheckTabWidth = 2
  55 # Check whether the indentation is followed coding style
  56 GeneralCheckIndentation = 1
  57 # The width of indentation
  58 GeneralCheckIndentationWidth = 2
  59 # Check whether no line is exceeding defined widty
  60 GeneralCheckLine = 1
  61 # The width of a line
  62 GeneralCheckLineWidth = 120
  63 # Check whether no use of _asm in the source file
  64 GeneralCheckNo_Asm = 1
  65 # Check whether no use of "#progma" in source file except "#pragma pack(#)".
  66 GeneralCheckNoProgma = 1
  67 # Check whether there is a carriage return at the end of the file
  68 GeneralCheckCarriageReturn = 1
  69 # Check whether the file exists
  70 GeneralCheckFileExistence = 1
  71 # Check whether file has non ACSII char
  72 GeneralCheckNonAcsii = 1
  73 # Check whether UNI file is valid
  74 GeneralCheckUni = 1
  75
  76 #
  77 # Space Checking
  78 #
  79 SpaceCheckAll = 1
  80
  81 #
  82 # Predicate Expression Checking
  83 #
  84 PredicateExpressionCheckAll = 0
  85
  86 # Check whether Boolean values, variable type BOOLEAN not use explicit comparisons to TRUE or FALSE
  87 PredicateExpressionCheckBooleanValue = 1
  88 # Check whether Non-Boolean comparisons use a compare operator (==, !=, >, < >=, <=).
  89 PredicateExpressionCheckNonBooleanOperator = 1
  90 # Check whether a comparison of any pointer to zero must be done via the NULL type
  91 PredicateExpressionCheckComparisonNullType = 1
  92
  93 #
  94 # Headers Checking
  95 #
  96 HeaderCheckAll = 0
  97
  98 # Check whether File header exists
  99 HeaderCheckFile = 1
 100 # Check whether Function header exists
 101 HeaderCheckFunction = 1
 102 # Check whether Meta data File header Comment End with '##'
 103 HeaderCheckFileCommentEnd = 0
 104 # Check whether C File header Comment content start with two spaces
 105 HeaderCheckCFileCommentStartSpacesNum = 0
 106 # Check whether C File header Comment's each reference at list should begin with a bullet character '-'
 107 HeaderCheckCFileCommentReferenceFormat = 0
 108 # Check whether C File header Comment have the License immediately after the ""Copyright"" line
 109 HeaderCheckCFileCommentLicenseFormat = 0
 110
 111 #
 112 # C Function Layout Checking
 113 #
 114 CFunctionLayoutCheckAll = 0
 115
 116 # Check whether return type exists and in the first line
 117 CFunctionLayoutCheckReturnType = 1
 118 # Check whether any optional functional modifiers exist and next to the return type
 119 CFunctionLayoutCheckOptionalFunctionalModifier = 1
 120 # Check whether the next line contains the function name, left justified, followed by the beginning of the parameter list
 121 # Check whether the closing parenthesis is on its own line and also indented two spaces
 122 CFunctionLayoutCheckFunctionName = 1
 123 # Check whether the function prototypes in include files have the same form as function definitions
 124 CFunctionLayoutCheckFunctionPrototype = 1
 125 # Check whether the body of a function is contained by open and close braces that must be in the first column
 126 CFunctionLayoutCheckFunctionBody = 1
 127 # Check whether the data declarations is the first code in a module.
 128 CFunctionLayoutCheckDataDeclaration = 1
 129 # Check whether no initialization of a variable as part of its declaration
 130 CFunctionLayoutCheckNoInitOfVariable = 1
 131 # Check whether no use of STATIC for functions
 132 CFunctionLayoutCheckNoStatic = 1
 133
 134 #
 135 # Include Files Checking
 136 #
 137 IncludeFileCheckAll = 0
 138
 139 #Check whether having include files with same name
 140 IncludeFileCheckSameName = 1
 141 # Check whether all include file contents is guarded by a #ifndef statement.
 142 # the #ifndef must be the first line of code following the file header comment
 143 # the #endif must appear on the last line in the file
 144 IncludeFileCheckIfndefStatement = 1
 145 # Check whether include files contain only public or only private data
 146 # Check whether include files NOT contain code or define data variables
 147 IncludeFileCheckData = 1
 148
 149 #
 150 # Declarations and Data Types Checking
 151 #
 152 DeclarationDataTypeCheckAll = 0
 153
 154 # Check whether no use of int, unsigned, char, void, static, long in any .c, .h or .asl files.
 155 DeclarationDataTypeCheckNoUseCType = 1
 156 # Check whether the modifiers IN, OUT, OPTIONAL, and UNALIGNED are used only to qualify arguments to a function and should not appear in a data type declaration
 157 DeclarationDataTypeCheckInOutModifier = 1
 158 # Check whether the EFIAPI modifier should be used at the entry of drivers, events, and member functions of protocols
 159 DeclarationDataTypeCheckEFIAPIModifier = 1
 160 # Check whether Enumerated Type has a 'typedef' and the name is capital
 161 DeclarationDataTypeCheckEnumeratedType = 1
 162 # Check whether Structure Type has a 'typedef' and the name is capital
 163 DeclarationDataTypeCheckStructureDeclaration = 1
 164 # Check whether having same Structure
 165 DeclarationDataTypeCheckSameStructure = 1
 166 # Check whether Union Type has a 'typedef' and the name is capital
 167 DeclarationDataTypeCheckUnionType = 1
 168
 169
 170 #
 171 # Naming Conventions Checking
 172 #
 173 NamingConventionCheckAll = 0
 174
 175 # Check whether only capital letters are used for #define declarations
 176 NamingConventionCheckDefineStatement = 1
 177 # Check whether only capital letters are used for typedef declarations
 178 NamingConventionCheckTypedefStatement = 1
 179 # Check whether the #ifndef at the start of an include file uses both prefix and postfix underscore characters, '_'.
 180 NamingConventionCheckIfndefStatement = 1
 181 # Rule for path name, variable name and function name
 182 # 1. First character should be upper case
 183 # 2. Existing lower case in a word
 184 # 3. No space existence
 185 # 4. Global variable name must start by a 'g'
 186 # Check whether the path name followed the rule
 187 NamingConventionCheckPathName = 1
 188 # Check whether the variable name followed the rule
 189 NamingConventionCheckVariableName = 1
 190 # Check whether the function name followed the rule
 191 NamingConventionCheckFunctionName = 1
 192 # Check whether NO use short variable name with single character
 193 NamingConventionCheckSingleCharacterVariable = 1
 194
 195 #
 196 # Doxygen Checking
 197 #
 198 DoxygenCheckAll = 0
 199
 200 # Check whether the file headers are followed Doxygen special documentation blocks in section 2.3.5
 201 DoxygenCheckFileHeader = 1
 202 # Check whether the function headers are followed Doxygen special documentation blocks in section 2.3.5
 203 DoxygenCheckFunctionHeader = 1
 204 # Check whether the first line of text in a comment block is a brief description of the element being documented.
 205 # The brief description must end with a period.
 206 DoxygenCheckCommentDescription = 1
 207 # Check whether comment lines with '///< ... text ...' format, if it is used, it should be after the code section.
 208 DoxygenCheckCommentFormat = 1
 209 # Check whether only Doxygen commands allowed to mark the code are @bug and @todo.
 210 DoxygenCheckCommand = 1
 211
 212 #
 213 # Meta-Data File Processing Checking
 214 #
 215 MetaDataFileCheckAll = 0
 216
 217 # Check whether each file defined in meta-data exists
 218 MetaDataFileCheckPathName = 1
 219 # Generate a list for all files defined in meta-data files
 220 MetaDataFileCheckGenerateFileList = 1
 221 # The path of log file
 222 MetaDataFileCheckPathOfGenerateFileList = File.log
 223 # Check whether all Library Instances defined for a given module (or dependent library instance) match the module's type.
 224 # Each Library Instance must specify the Supported Module Types in its INF file,
 225 # and any module specifying the library instance must be one of the supported types.
 226 MetaDataFileCheckLibraryInstance = 1
 227 # Check whether a Library Instance has been defined for all dependent library classes
 228 MetaDataFileCheckLibraryInstanceDependent = 1
 229 # Check whether the Library Instances specified by the LibraryClasses sections are listed in order of dependencies
 230 MetaDataFileCheckLibraryInstanceOrder = 1
 231 # Check whether the unnecessary inclusion of library classes in the INF file
 232 MetaDataFileCheckLibraryNoUse = 1
 233 # Check the header file in Include\Library directory whether be defined in the package DEC file.
 234 MetaDataFileCheckLibraryDefinedInDec = 1
 235 # Check whether an INF file is specified in the FDF file, but not in the DSC file, then the INF file must be for a Binary module only
 236 MetaDataFileCheckBinaryInfInFdf = 1
 237 # Not to report error and warning related OS include file such as "windows.h" and "stdio.h".
 238 # Check whether a PCD is set in a DSC file or the FDF file, but not in both.
 239 MetaDataFileCheckPcdDuplicate = 1
 240 # Check whether PCD settings in the FDF file can only be related to flash.
 241 MetaDataFileCheckPcdFlash = 1
 242 # Check whether PCDs used in INF files but not specified in DSC or FDF files
 243 MetaDataFileCheckPcdNoUse = 0
 244 # Check whether having duplicate guids defined for Guid/Protocol/Ppi
 245 MetaDataFileCheckGuidDuplicate = 1
 246 # Check whether all files under module directory are described in INF files
 247 MetaDataFileCheckModuleFileNoUse = 1
 248 # Check whether the PCD is correctly used in C function via its type
 249 MetaDataFileCheckPcdType = 1
 250 # Check whether there are FILE_GUID duplication among different INF files
 251 MetaDataFileCheckModuleFileGuidDuplication = 1
 252
 253 #
 254 # Uni File Processing Checking
 255 #
 256 UniCheckAll = 0
 257 # Check INF or DEC file whether defined the localized information in the associated UNI file.
 258 UniCheckHelpInfo = 1
 259 # Check PCD whether defined the prompt, help in the DEC file and localized information in the associated UNI file.
 260 UniCheckPCDInfo = 1
 261 # Uncheck whether UNI file is in UTF-16 format
 262 GeneralCheckUni = -1
 263
 264 #
 265 # SMM Communicate Function Parameter Checking
 266 #
 267 SmmCommParaCheckAll = 0
 268 # Check if the EFI_SMM_COMMUNICATION_PROTOCOL parameter buffer type is Reserved / ACPI NVS or UEFI RT code/data
 269 SmmCommParaCheckBufferType = 1
 270
 271 #
 272 # The check points in this section are reserved
 273 #
 274 # GotoStatementCheckAll = 0
 275 # SpellingCheckAll = 0
 276 #
 277
 278 # A list for binary file ext name
 279 BinaryExtList = EXE, EFI, FV, ROM, DLL, COM, BMP, GIF, PYD, CMP, BIN, JPG, UNI, RAW, COM2, LIB, DEPEX, SYS, DB
 280 # A list for only scanning dirs, the dirs should be the top folder(s) under workspace
 281 ScanOnlyDirList = ScanFolder1 ScanFolder2