2 # build a platform or a module
4 # Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
6 # This program and the accompanying materials
7 # are licensed and made available under the terms and conditions of the BSD License
8 # which accompanies this distribution. The full text of the license may be found at
9 # http://opensource.org/licenses/bsd-license.php
11 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
18 import Common
.LongFilePathOs
as os
26 import encodings
.ascii
29 from threading
import *
30 from optparse
import OptionParser
31 from subprocess
import *
32 from Common
import Misc
as Utils
34 from Common
.LongFilePathSupport
import OpenLongFilePath
as open
35 from Common
.LongFilePathSupport
import LongFilePath
36 from Common
.TargetTxtClassObject
import *
37 from Common
.ToolDefClassObject
import *
38 from Common
.DataType
import *
39 from Common
.BuildVersion
import gBUILD_VERSION
40 from AutoGen
.AutoGen
import *
41 from Common
.BuildToolError
import *
42 from Workspace
.WorkspaceDatabase
import *
44 from BuildReport
import BuildReport
45 from GenPatchPcdTable
.GenPatchPcdTable
import *
46 from PatchPcdValue
.PatchPcdValue
import *
48 import Common
.EdkLogger
49 import Common
.GlobalData
as GlobalData
51 # Version and Copyright
52 VersionNumber
= "0.51" + ' ' + gBUILD_VERSION
53 __version__
= "%prog Version " + VersionNumber
54 __copyright__
= "Copyright (c) 2007 - 2014, Intel Corporation All rights reserved."
56 ## standard targets of build command
57 gSupportedTarget
= ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']
59 ## build configuration file
60 gBuildConfiguration
= "Conf/target.txt"
61 gBuildCacheDir
= "Conf/.cache"
62 gToolsDefinition
= "Conf/tools_def.txt"
64 TemporaryTablePattern
= re
.compile(r
'^_\d+_\d+_[a-fA-F0-9]+$')
67 ## Check environment PATH variable to make sure the specified tool is found
69 # If the tool is found in the PATH, then True is returned
70 # Otherwise, False is returned
72 def IsToolInPath(tool
):
73 if os
.environ
.has_key('PATHEXT'):
74 extns
= os
.environ
['PATHEXT'].split(os
.path
.pathsep
)
77 for pathDir
in os
.environ
['PATH'].split(os
.path
.pathsep
):
79 if os
.path
.exists(os
.path
.join(pathDir
, tool
+ ext
)):
83 ## Check environment variables
85 # Check environment variables that must be set for build. Currently they are
87 # WORKSPACE The directory all packages/platforms start from
88 # EDK_TOOLS_PATH The directory contains all tools needed by the build
89 # PATH $(EDK_TOOLS_PATH)/Bin/<sys> must be set in PATH
91 # If any of above environment variable is not set or has error, the build
94 def CheckEnvVariable():
96 if "WORKSPACE" not in os
.environ
:
97 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
98 ExtraData
="WORKSPACE")
100 WorkspaceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["WORKSPACE"]))
101 if not os
.path
.exists(WorkspaceDir
):
102 EdkLogger
.error("build", FILE_NOT_FOUND
, "WORKSPACE doesn't exist", ExtraData
="%s" % WorkspaceDir
)
103 elif ' ' in WorkspaceDir
:
104 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in WORKSPACE path",
105 ExtraData
=WorkspaceDir
)
106 os
.environ
["WORKSPACE"] = WorkspaceDir
109 # Check EFI_SOURCE (Edk build convention). EDK_SOURCE will always point to ECP
111 if "ECP_SOURCE" not in os
.environ
:
112 os
.environ
["ECP_SOURCE"] = os
.path
.join(WorkspaceDir
, GlobalData
.gEdkCompatibilityPkg
)
113 if "EFI_SOURCE" not in os
.environ
:
114 os
.environ
["EFI_SOURCE"] = os
.environ
["ECP_SOURCE"]
115 if "EDK_SOURCE" not in os
.environ
:
116 os
.environ
["EDK_SOURCE"] = os
.environ
["ECP_SOURCE"]
119 # Unify case of characters on case-insensitive systems
121 EfiSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EFI_SOURCE"]))
122 EdkSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EDK_SOURCE"]))
123 EcpSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["ECP_SOURCE"]))
125 os
.environ
["EFI_SOURCE"] = EfiSourceDir
126 os
.environ
["EDK_SOURCE"] = EdkSourceDir
127 os
.environ
["ECP_SOURCE"] = EcpSourceDir
128 os
.environ
["EDK_TOOLS_PATH"] = os
.path
.normcase(os
.environ
["EDK_TOOLS_PATH"])
130 if not os
.path
.exists(EcpSourceDir
):
131 EdkLogger
.verbose("ECP_SOURCE = %s doesn't exist. Edk modules could not be built." % EcpSourceDir
)
132 elif ' ' in EcpSourceDir
:
133 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in ECP_SOURCE path",
134 ExtraData
=EcpSourceDir
)
135 if not os
.path
.exists(EdkSourceDir
):
136 if EdkSourceDir
== EcpSourceDir
:
137 EdkLogger
.verbose("EDK_SOURCE = %s doesn't exist. Edk modules could not be built." % EdkSourceDir
)
139 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE does not exist",
140 ExtraData
=EdkSourceDir
)
141 elif ' ' in EdkSourceDir
:
142 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EDK_SOURCE path",
143 ExtraData
=EdkSourceDir
)
144 if not os
.path
.exists(EfiSourceDir
):
145 if EfiSourceDir
== EcpSourceDir
:
146 EdkLogger
.verbose("EFI_SOURCE = %s doesn't exist. Edk modules could not be built." % EfiSourceDir
)
148 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE does not exist",
149 ExtraData
=EfiSourceDir
)
150 elif ' ' in EfiSourceDir
:
151 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EFI_SOURCE path",
152 ExtraData
=EfiSourceDir
)
154 # change absolute path to relative path to WORKSPACE
155 if EfiSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
156 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE is not under WORKSPACE",
157 ExtraData
="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir
, EfiSourceDir
))
158 if EdkSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
159 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE is not under WORKSPACE",
160 ExtraData
="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir
, EdkSourceDir
))
161 if EcpSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
162 EdkLogger
.error("build", PARAMETER_INVALID
, "ECP_SOURCE is not under WORKSPACE",
163 ExtraData
="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir
, EcpSourceDir
))
165 # check EDK_TOOLS_PATH
166 if "EDK_TOOLS_PATH" not in os
.environ
:
167 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
168 ExtraData
="EDK_TOOLS_PATH")
171 if "PATH" not in os
.environ
:
172 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
175 GlobalData
.gWorkspace
= WorkspaceDir
176 GlobalData
.gEfiSource
= EfiSourceDir
177 GlobalData
.gEdkSource
= EdkSourceDir
178 GlobalData
.gEcpSource
= EcpSourceDir
180 GlobalData
.gGlobalDefines
["WORKSPACE"] = WorkspaceDir
181 GlobalData
.gGlobalDefines
["EFI_SOURCE"] = EfiSourceDir
182 GlobalData
.gGlobalDefines
["EDK_SOURCE"] = EdkSourceDir
183 GlobalData
.gGlobalDefines
["ECP_SOURCE"] = EcpSourceDir
184 GlobalData
.gGlobalDefines
["EDK_TOOLS_PATH"] = os
.environ
["EDK_TOOLS_PATH"]
186 ## Get normalized file path
188 # Convert the path to be local format, and remove the WORKSPACE path at the
189 # beginning if the file path is given in full path.
191 # @param FilePath File path to be normalized
192 # @param Workspace Workspace path which the FilePath will be checked against
194 # @retval string The normalized file path
196 def NormFile(FilePath
, Workspace
):
197 # check if the path is absolute or relative
198 if os
.path
.isabs(FilePath
):
199 FileFullPath
= os
.path
.normpath(FilePath
)
201 FileFullPath
= os
.path
.normpath(os
.path
.join(Workspace
, FilePath
))
203 # check if the file path exists or not
204 if not os
.path
.isfile(FileFullPath
):
205 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath
)
207 # remove workspace directory from the beginning part of the file path
208 if Workspace
[-1] in ["\\", "/"]:
209 return FileFullPath
[len(Workspace
):]
211 return FileFullPath
[(len(Workspace
) + 1):]
213 ## Get the output of an external program
215 # This is the entrance method of thread reading output of an external program and
216 # putting them in STDOUT/STDERR of current program.
218 # @param From The stream message read from
219 # @param To The stream message put on
220 # @param ExitFlag The flag used to indicate stopping reading
222 def ReadMessage(From
, To
, ExitFlag
):
224 # read one line a time
225 Line
= From
.readline()
226 # empty string means "end"
227 if Line
!= None and Line
!= "":
234 ## Launch an external program
236 # This method will call subprocess.Popen to execute an external program with
237 # given options in specified directory. Because of the dead-lock issue during
238 # redirecting output of the external program, threads are used to to do the
241 # @param Command A list or string containing the call of the program
242 # @param WorkingDir The directory in which the program will be running
244 def LaunchCommand(Command
, WorkingDir
):
245 # if working directory doesn't exist, Popen() will raise an exception
246 if not os
.path
.isdir(WorkingDir
):
247 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=WorkingDir
)
249 # Command is used as the first Argument in following Popen().
250 # It could be a string or sequence. We find that if command is a string in following Popen(),
251 # ubuntu may fail with an error message that the command is not found.
252 # So here we may need convert command from string to list instance.
253 if not isinstance(Command
, list):
254 Command
= Command
.split()
257 EndOfProcedure
= None
260 Proc
= Popen(Command
, stdout
=PIPE
, stderr
=PIPE
, env
=os
.environ
, cwd
=WorkingDir
, bufsize
=-1)
262 # launch two threads to read the STDOUT and STDERR
263 EndOfProcedure
= Event()
264 EndOfProcedure
.clear()
266 StdOutThread
= Thread(target
=ReadMessage
, args
=(Proc
.stdout
, EdkLogger
.info
, EndOfProcedure
))
267 StdOutThread
.setName("STDOUT-Redirector")
268 StdOutThread
.setDaemon(False)
272 StdErrThread
= Thread(target
=ReadMessage
, args
=(Proc
.stderr
, EdkLogger
.quiet
, EndOfProcedure
))
273 StdErrThread
.setName("STDERR-Redirector")
274 StdErrThread
.setDaemon(False)
277 # waiting for program exit
279 except: # in case of aborting
280 # terminate the threads redirecting the program output
281 if EndOfProcedure
!= None:
284 if type(Command
) != type(""):
285 Command
= " ".join(Command
)
286 EdkLogger
.error("build", COMMAND_FAILURE
, "Failed to start command", ExtraData
="%s [%s]" % (Command
, WorkingDir
))
293 # check the return code of the program
294 if Proc
.returncode
!= 0:
295 if type(Command
) != type(""):
296 Command
= " ".join(Command
)
297 EdkLogger
.error("build", COMMAND_FAILURE
, ExtraData
="%s [%s]" % (Command
, WorkingDir
))
299 ## The smallest unit that can be built in multi-thread build mode
301 # This is the base class of build unit. The "Obj" parameter must provide
302 # __str__(), __eq__() and __hash__() methods. Otherwise there could be build units
305 # Currently the "Obj" should be only ModuleAutoGen or PlatformAutoGen objects.
310 # @param self The object pointer
311 # @param Obj The object the build is working on
312 # @param Target The build target name, one of gSupportedTarget
313 # @param Dependency The BuildUnit(s) which must be completed in advance
314 # @param WorkingDir The directory build command starts in
316 def __init__(self
, Obj
, BuildCommand
, Target
, Dependency
, WorkingDir
="."):
317 self
.BuildObject
= Obj
318 self
.Dependency
= Dependency
319 self
.WorkingDir
= WorkingDir
321 self
.BuildCommand
= BuildCommand
323 EdkLogger
.error("build", OPTION_MISSING
,
324 "No build command found for this module. "
325 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
326 (Obj
.BuildTarget
, Obj
.ToolChain
, Obj
.Arch
),
332 # It just returns the string representation of self.BuildObject
334 # @param self The object pointer
337 return str(self
.BuildObject
)
339 ## "==" operator method
341 # It just compares self.BuildObject with "Other". So self.BuildObject must
342 # provide its own __eq__() method.
344 # @param self The object pointer
345 # @param Other The other BuildUnit object compared to
347 def __eq__(self
, Other
):
348 return Other
!= None and self
.BuildObject
== Other
.BuildObject \
349 and self
.BuildObject
.Arch
== Other
.BuildObject
.Arch
353 # It just returns the hash value of self.BuildObject which must be hashable.
355 # @param self The object pointer
358 return hash(self
.BuildObject
) + hash(self
.BuildObject
.Arch
)
361 return repr(self
.BuildObject
)
363 ## The smallest module unit that can be built by nmake/make command in multi-thread build mode
365 # This class is for module build by nmake/make build system. The "Obj" parameter
366 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
367 # be make units missing build.
369 # Currently the "Obj" should be only ModuleAutoGen object.
371 class ModuleMakeUnit(BuildUnit
):
374 # @param self The object pointer
375 # @param Obj The ModuleAutoGen object the build is working on
376 # @param Target The build target name, one of gSupportedTarget
378 def __init__(self
, Obj
, Target
):
379 Dependency
= [ModuleMakeUnit(La
, Target
) for La
in Obj
.LibraryAutoGenList
]
380 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
381 if Target
in [None, "", "all"]:
382 self
.Target
= "tbuild"
384 ## The smallest platform unit that can be built by nmake/make command in multi-thread build mode
386 # This class is for platform build by nmake/make build system. The "Obj" parameter
387 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
388 # be make units missing build.
390 # Currently the "Obj" should be only PlatformAutoGen object.
392 class PlatformMakeUnit(BuildUnit
):
395 # @param self The object pointer
396 # @param Obj The PlatformAutoGen object the build is working on
397 # @param Target The build target name, one of gSupportedTarget
399 def __init__(self
, Obj
, Target
):
400 Dependency
= [ModuleMakeUnit(Lib
, Target
) for Lib
in self
.BuildObject
.LibraryAutoGenList
]
401 Dependency
.extend([ModuleMakeUnit(Mod
, Target
) for Mod
in self
.BuildObject
.ModuleAutoGenList
])
402 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
404 ## The class representing the task of a module build or platform build
406 # This class manages the build tasks in multi-thread build mode. Its jobs include
407 # scheduling thread running, catching thread error, monitor the thread status, etc.
410 # queue for tasks waiting for schedule
411 _PendingQueue
= sdict()
412 _PendingQueueLock
= threading
.Lock()
414 # queue for tasks ready for running
415 _ReadyQueue
= sdict()
416 _ReadyQueueLock
= threading
.Lock()
418 # queue for run tasks
419 _RunningQueue
= sdict()
420 _RunningQueueLock
= threading
.Lock()
422 # queue containing all build tasks, in case duplicate build
425 # flag indicating error occurs in a running thread
426 _ErrorFlag
= threading
.Event()
430 # BoundedSemaphore object used to control the number of running threads
433 # flag indicating if the scheduler is started or not
434 _SchedulerStopped
= threading
.Event()
435 _SchedulerStopped
.set()
437 ## Start the task scheduler thread
439 # @param MaxThreadNumber The maximum thread number
440 # @param ExitFlag Flag used to end the scheduler
443 def StartScheduler(MaxThreadNumber
, ExitFlag
):
444 SchedulerThread
= Thread(target
=BuildTask
.Scheduler
, args
=(MaxThreadNumber
, ExitFlag
))
445 SchedulerThread
.setName("Build-Task-Scheduler")
446 SchedulerThread
.setDaemon(False)
447 SchedulerThread
.start()
448 # wait for the scheduler to be started, especially useful in Linux
449 while not BuildTask
.IsOnGoing():
454 # @param MaxThreadNumber The maximum thread number
455 # @param ExitFlag Flag used to end the scheduler
458 def Scheduler(MaxThreadNumber
, ExitFlag
):
459 BuildTask
._SchedulerStopped
.clear()
461 # use BoundedSemaphore to control the maximum running threads
462 BuildTask
._Thread
= BoundedSemaphore(MaxThreadNumber
)
464 # scheduling loop, which will exits when no pending/ready task and
465 # indicated to do so, or there's error in running thread
467 while (len(BuildTask
._PendingQueue
) > 0 or len(BuildTask
._ReadyQueue
) > 0 \
468 or not ExitFlag
.isSet()) and not BuildTask
._ErrorFlag
.isSet():
469 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Pending Queue (%d), Ready Queue (%d)"
470 % (len(BuildTask
._PendingQueue
), len(BuildTask
._ReadyQueue
)))
472 # get all pending tasks
473 BuildTask
._PendingQueueLock
.acquire()
474 BuildObjectList
= BuildTask
._PendingQueue
.keys()
476 # check if their dependency is resolved, and if true, move them
479 for BuildObject
in BuildObjectList
:
480 Bt
= BuildTask
._PendingQueue
[BuildObject
]
482 BuildTask
._ReadyQueue
[BuildObject
] = BuildTask
._PendingQueue
.pop(BuildObject
)
483 BuildTask
._PendingQueueLock
.release()
485 # launch build thread until the maximum number of threads is reached
486 while not BuildTask
._ErrorFlag
.isSet():
487 # empty ready queue, do nothing further
488 if len(BuildTask
._ReadyQueue
) == 0:
491 # wait for active thread(s) exit
492 BuildTask
._Thread
.acquire(True)
494 # start a new build thread
495 Bo
= BuildTask
._ReadyQueue
.keys()[0]
496 Bt
= BuildTask
._ReadyQueue
.pop(Bo
)
498 # move into running queue
499 BuildTask
._RunningQueueLock
.acquire()
500 BuildTask
._RunningQueue
[Bo
] = Bt
501 BuildTask
._RunningQueueLock
.release()
510 # wait for all running threads exit
511 if BuildTask
._ErrorFlag
.isSet():
512 EdkLogger
.quiet("\nWaiting for all build threads exit...")
513 # while not BuildTask._ErrorFlag.isSet() and \
514 while len(BuildTask
._RunningQueue
) > 0:
515 EdkLogger
.verbose("Waiting for thread ending...(%d)" % len(BuildTask
._RunningQueue
))
516 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Threads [%s]" % ", ".join([Th
.getName() for Th
in threading
.enumerate()]))
519 except BaseException
, X
:
521 # TRICK: hide the output of threads left runing, so that the user can
522 # catch the error message easily
524 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
525 BuildTask
._ErrorFlag
.set()
526 BuildTask
._ErrorMessage
= "build thread scheduler error\n\t%s" % str(X
)
528 BuildTask
._PendingQueue
.clear()
529 BuildTask
._ReadyQueue
.clear()
530 BuildTask
._RunningQueue
.clear()
531 BuildTask
._TaskQueue
.clear()
532 BuildTask
._SchedulerStopped
.set()
534 ## Wait for all running method exit
537 def WaitForComplete():
538 BuildTask
._SchedulerStopped
.wait()
540 ## Check if the scheduler is running or not
544 return not BuildTask
._SchedulerStopped
.isSet()
549 if BuildTask
.IsOnGoing():
550 BuildTask
._ErrorFlag
.set()
551 BuildTask
.WaitForComplete()
553 ## Check if there's error in running thread
555 # Since the main thread cannot catch exceptions in other thread, we have to
556 # use threading.Event to communicate this formation to main thread.
560 return BuildTask
._ErrorFlag
.isSet()
562 ## Get error message in running thread
564 # Since the main thread cannot catch exceptions in other thread, we have to
565 # use a static variable to communicate this message to main thread.
568 def GetErrorMessage():
569 return BuildTask
._ErrorMessage
571 ## Factory method to create a BuildTask object
573 # This method will check if a module is building or has been built. And if
574 # true, just return the associated BuildTask object in the _TaskQueue. If
575 # not, create and return a new BuildTask object. The new BuildTask object
576 # will be appended to the _PendingQueue for scheduling later.
578 # @param BuildItem A BuildUnit object representing a build object
579 # @param Dependency The dependent build object of BuildItem
582 def New(BuildItem
, Dependency
=None):
583 if BuildItem
in BuildTask
._TaskQueue
:
584 Bt
= BuildTask
._TaskQueue
[BuildItem
]
588 Bt
._Init
(BuildItem
, Dependency
)
589 BuildTask
._TaskQueue
[BuildItem
] = Bt
591 BuildTask
._PendingQueueLock
.acquire()
592 BuildTask
._PendingQueue
[BuildItem
] = Bt
593 BuildTask
._PendingQueueLock
.release()
597 ## The real constructor of BuildTask
599 # @param BuildItem A BuildUnit object representing a build object
600 # @param Dependency The dependent build object of BuildItem
602 def _Init(self
, BuildItem
, Dependency
=None):
603 self
.BuildItem
= BuildItem
605 self
.DependencyList
= []
606 if Dependency
== None:
607 Dependency
= BuildItem
.Dependency
609 Dependency
.extend(BuildItem
.Dependency
)
610 self
.AddDependency(Dependency
)
611 # flag indicating build completes, used to avoid unnecessary re-build
612 self
.CompleteFlag
= False
614 ## Check if all dependent build tasks are completed or not
618 for Dep
in self
.DependencyList
:
619 if Dep
.CompleteFlag
== True:
626 ## Add dependent build task
628 # @param Dependency The list of dependent build objects
630 def AddDependency(self
, Dependency
):
631 for Dep
in Dependency
:
632 self
.DependencyList
.append(BuildTask
.New(Dep
)) # BuildTask list
634 ## The thread wrapper of LaunchCommand function
636 # @param Command A list or string contains the call of the command
637 # @param WorkingDir The directory in which the program will be running
639 def _CommandThread(self
, Command
, WorkingDir
):
641 LaunchCommand(Command
, WorkingDir
)
642 self
.CompleteFlag
= True
645 # TRICK: hide the output of threads left runing, so that the user can
646 # catch the error message easily
648 if not BuildTask
._ErrorFlag
.isSet():
649 GlobalData
.gBuildingModule
= "%s [%s, %s, %s]" % (str(self
.BuildItem
.BuildObject
),
650 self
.BuildItem
.BuildObject
.Arch
,
651 self
.BuildItem
.BuildObject
.ToolChain
,
652 self
.BuildItem
.BuildObject
.BuildTarget
654 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
655 BuildTask
._ErrorFlag
.set()
656 BuildTask
._ErrorMessage
= "%s broken\n %s [%s]" % \
657 (threading
.currentThread().getName(), Command
, WorkingDir
)
658 # indicate there's a thread is available for another build task
659 BuildTask
._RunningQueueLock
.acquire()
660 BuildTask
._RunningQueue
.pop(self
.BuildItem
)
661 BuildTask
._RunningQueueLock
.release()
662 BuildTask
._Thread
.release()
664 ## Start build task thread
667 EdkLogger
.quiet("Building ... %s" % repr(self
.BuildItem
))
668 Command
= self
.BuildItem
.BuildCommand
+ [self
.BuildItem
.Target
]
669 self
.BuildTread
= Thread(target
=self
._CommandThread
, args
=(Command
, self
.BuildItem
.WorkingDir
))
670 self
.BuildTread
.setName("build thread")
671 self
.BuildTread
.setDaemon(False)
672 self
.BuildTread
.start()
674 ## The class contains the information related to EFI image
679 # Constructor will load all required image information.
681 # @param BaseName The full file path of image.
682 # @param Guid The GUID for image.
683 # @param Arch Arch of this image.
684 # @param OutputDir The output directory for image.
685 # @param DebugDir The debug directory for image.
686 # @param ImageClass PeImage Information
688 def __init__(self
, BaseName
, Guid
, Arch
, OutputDir
, DebugDir
, ImageClass
):
689 self
.BaseName
= BaseName
692 self
.OutputDir
= OutputDir
693 self
.DebugDir
= DebugDir
694 self
.Image
= ImageClass
695 self
.Image
.Size
= (self
.Image
.Size
/ 0x1000 + 1) * 0x1000
697 ## The class implementing the EDK2 build process
699 # The build process includes:
700 # 1. Load configuration from target.txt and tools_def.txt in $(WORKSPACE)/Conf
701 # 2. Parse DSC file of active platform
702 # 3. Parse FDF file if any
703 # 4. Establish build database, including parse all other files (module, package)
704 # 5. Create AutoGen files (C code file, depex file, makefile) if necessary
705 # 6. Call build command
710 # Constructor will load all necessary configurations, parse platform, modules
711 # and packages and the establish a database for AutoGen.
713 # @param Target The build command target, one of gSupportedTarget
714 # @param WorkspaceDir The directory of workspace
715 # @param BuildOptions Build options passed from command line
717 def __init__(self
, Target
, WorkspaceDir
, BuildOptions
):
718 self
.WorkspaceDir
= WorkspaceDir
720 self
.PlatformFile
= BuildOptions
.PlatformFile
721 self
.ModuleFile
= BuildOptions
.ModuleFile
722 self
.ArchList
= BuildOptions
.TargetArch
723 self
.ToolChainList
= BuildOptions
.ToolChain
724 self
.BuildTargetList
= BuildOptions
.BuildTarget
725 self
.Fdf
= BuildOptions
.FdfFile
726 self
.FdList
= BuildOptions
.RomImage
727 self
.FvList
= BuildOptions
.FvImage
728 self
.CapList
= BuildOptions
.CapName
729 self
.SilentMode
= BuildOptions
.SilentMode
730 self
.ThreadNumber
= BuildOptions
.ThreadNumber
731 self
.SkipAutoGen
= BuildOptions
.SkipAutoGen
732 self
.Reparse
= BuildOptions
.Reparse
733 self
.SkuId
= BuildOptions
.SkuId
734 self
.SpawnMode
= True
735 self
.BuildReport
= BuildReport(BuildOptions
.ReportFile
, BuildOptions
.ReportType
)
736 self
.TargetTxt
= TargetTxtClassObject()
737 self
.ToolDef
= ToolDefClassObject()
738 if BuildOptions
.DisableCache
:
739 self
.Db
= WorkspaceDatabase(":memory:")
741 self
.Db
= WorkspaceDatabase(None, self
.Reparse
)
742 self
.BuildDatabase
= self
.Db
.BuildObject
744 self
.LoadFixAddress
= 0
745 self
.UniFlag
= BuildOptions
.Flag
747 # print dot character during doing some time-consuming work
748 self
.Progress
= Utils
.Progressor()
752 # print current build environment and configuration
753 EdkLogger
.quiet("%-16s = %s" % ("WORKSPACE", os
.environ
["WORKSPACE"]))
754 EdkLogger
.quiet("%-16s = %s" % ("ECP_SOURCE", os
.environ
["ECP_SOURCE"]))
755 EdkLogger
.quiet("%-16s = %s" % ("EDK_SOURCE", os
.environ
["EDK_SOURCE"]))
756 EdkLogger
.quiet("%-16s = %s" % ("EFI_SOURCE", os
.environ
["EFI_SOURCE"]))
757 EdkLogger
.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os
.environ
["EDK_TOOLS_PATH"]))
761 os
.chdir(self
.WorkspaceDir
)
763 ## Load configuration
765 # This method will parse target.txt and get the build configurations.
767 def LoadConfiguration(self
):
769 # Check target.txt and tools_def.txt and Init them
771 BuildConfigurationFile
= os
.path
.normpath(os
.path
.join(self
.WorkspaceDir
, gBuildConfiguration
))
772 if os
.path
.isfile(BuildConfigurationFile
) == True:
773 StatusCode
= self
.TargetTxt
.LoadTargetTxtFile(BuildConfigurationFile
)
775 ToolDefinitionFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_CONF
]
776 if ToolDefinitionFile
== '':
777 ToolDefinitionFile
= gToolsDefinition
778 ToolDefinitionFile
= os
.path
.normpath(os
.path
.join(self
.WorkspaceDir
, ToolDefinitionFile
))
779 if os
.path
.isfile(ToolDefinitionFile
) == True:
780 StatusCode
= self
.ToolDef
.LoadToolDefFile(ToolDefinitionFile
)
782 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=ToolDefinitionFile
)
784 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=BuildConfigurationFile
)
786 # if no ARCH given in command line, get it from target.txt
787 if not self
.ArchList
:
788 self
.ArchList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET_ARCH
]
789 self
.ArchList
= tuple(self
.ArchList
)
791 # if no build target given in command line, get it from target.txt
792 if not self
.BuildTargetList
:
793 self
.BuildTargetList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET
]
795 # if no tool chain given in command line, get it from target.txt
796 if not self
.ToolChainList
:
797 self
.ToolChainList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_TAG
]
798 if self
.ToolChainList
== None or len(self
.ToolChainList
) == 0:
799 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
, ExtraData
="No toolchain given. Don't know how to build.\n")
801 # check if the tool chains are defined or not
802 NewToolChainList
= []
803 for ToolChain
in self
.ToolChainList
:
804 if ToolChain
not in self
.ToolDef
.ToolsDefTxtDatabase
[TAB_TOD_DEFINES_TOOL_CHAIN_TAG
]:
805 EdkLogger
.warn("build", "Tool chain [%s] is not defined" % ToolChain
)
807 NewToolChainList
.append(ToolChain
)
808 # if no tool chain available, break the build
809 if len(NewToolChainList
) == 0:
810 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
811 ExtraData
="[%s] not defined. No toolchain available for build!\n" % ", ".join(self
.ToolChainList
))
813 self
.ToolChainList
= NewToolChainList
815 if self
.ThreadNumber
== None:
816 self
.ThreadNumber
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER
]
817 if self
.ThreadNumber
== '':
818 self
.ThreadNumber
= 0
820 self
.ThreadNumber
= int(self
.ThreadNumber
, 0)
822 if self
.ThreadNumber
== 0:
823 self
.ThreadNumber
= 1
825 if not self
.PlatformFile
:
826 PlatformFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_ACTIVE_PLATFORM
]
828 # Try to find one in current directory
829 WorkingDirectory
= os
.getcwd()
830 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.dsc')))
831 FileNum
= len(FileList
)
833 EdkLogger
.error("build", OPTION_MISSING
,
834 ExtraData
="There are %d DSC files in %s. Use '-p' to specify one.\n" % (FileNum
, WorkingDirectory
))
836 PlatformFile
= FileList
[0]
838 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
839 ExtraData
="No active platform specified in target.txt or command line! Nothing can be built.\n")
841 self
.PlatformFile
= PathClass(NormFile(PlatformFile
, self
.WorkspaceDir
), self
.WorkspaceDir
)
843 ## Initialize build configuration
845 # This method will parse DSC file and merge the configurations from
846 # command line and target.txt, then get the final build configurations.
849 # parse target.txt, tools_def.txt, and platform file
850 self
.LoadConfiguration()
852 # Allow case-insensitive for those from command line or configuration file
853 ErrorCode
, ErrorInfo
= self
.PlatformFile
.Validate(".dsc", False)
855 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
857 # create metafile database
858 self
.Db
.InitDatabase()
860 ## Build a module or platform
862 # Create autogen code and makefile for a module or platform, and the launch
863 # "make" command to build it
865 # @param Target The target of build command
866 # @param Platform The platform file
867 # @param Module The module file
868 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
869 # @param ToolChain The name of toolchain to build
870 # @param Arch The arch of the module/platform
871 # @param CreateDepModuleCodeFile Flag used to indicate creating code
872 # for dependent modules/Libraries
873 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
874 # for dependent modules/Libraries
876 def _BuildPa(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True, BuildModule
=False):
877 if AutoGenObject
== None:
880 # skip file generation for cleanxxx targets, run and fds target
881 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
882 # for target which must generate AutoGen code and makefile
883 if not self
.SkipAutoGen
or Target
== 'genc':
884 self
.Progress
.Start("Generating code")
885 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
886 self
.Progress
.Stop("done!")
890 if not self
.SkipAutoGen
or Target
== 'genmake':
891 self
.Progress
.Start("Generating makefile")
892 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
893 self
.Progress
.Stop("done!")
894 if Target
== "genmake":
897 # always recreate top/platform makefile when clean, just in case of inconsistency
898 AutoGenObject
.CreateCodeFile(False)
899 AutoGenObject
.CreateMakeFile(False)
901 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
902 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
904 BuildCommand
= AutoGenObject
.BuildCommand
905 if BuildCommand
== None or len(BuildCommand
) == 0:
906 EdkLogger
.error("build", OPTION_MISSING
,
907 "No build command found for this module. "
908 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
909 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
910 ExtraData
=str(AutoGenObject
))
912 makefile
= GenMake
.BuildFile(AutoGenObject
)._FILE
_NAME
_[GenMake
.gMakeType
]
916 LaunchCommand(AutoGenObject
.GenFdsCommand
, AutoGenObject
.MakeFileDir
)
921 RunDir
= os
.path
.normpath(os
.path
.join(AutoGenObject
.BuildDir
, 'IA32'))
922 Command
= '.\SecMain'
924 LaunchCommand(Command
, RunDir
)
929 BuildCommand
= BuildCommand
+ [Target
]
930 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
931 self
.CreateAsBuiltInf()
935 if Target
== 'libraries':
936 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
937 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Lib
, makefile
)), 'pbuild']
938 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
942 if Target
== 'modules':
943 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
944 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Lib
, makefile
)), 'pbuild']
945 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
946 for Mod
in AutoGenObject
.ModuleBuildDirectoryList
:
947 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Mod
, makefile
)), 'pbuild']
948 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
949 self
.CreateAsBuiltInf()
953 if Target
== 'cleanlib':
954 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
955 LibMakefile
= os
.path
.normpath(os
.path
.join(Lib
, makefile
))
956 if os
.path
.exists(LibMakefile
):
957 NewBuildCommand
= BuildCommand
+ ['-f', LibMakefile
, 'cleanall']
958 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
962 if Target
== 'clean':
963 for Mod
in AutoGenObject
.ModuleBuildDirectoryList
:
964 ModMakefile
= os
.path
.normpath(os
.path
.join(Mod
, makefile
))
965 if os
.path
.exists(ModMakefile
):
966 NewBuildCommand
= BuildCommand
+ ['-f', ModMakefile
, 'cleanall']
967 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
968 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
969 LibMakefile
= os
.path
.normpath(os
.path
.join(Lib
, makefile
))
970 if os
.path
.exists(LibMakefile
):
971 NewBuildCommand
= BuildCommand
+ ['-f', LibMakefile
, 'cleanall']
972 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
976 if Target
== 'cleanall':
978 #os.rmdir(AutoGenObject.BuildDir)
979 RemoveDirectory(AutoGenObject
.BuildDir
, True)
981 # First should close DB.
984 RemoveDirectory(os
.path
.dirname(GlobalData
.gDatabasePath
), True)
985 except WindowsError, X
:
986 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
989 ## Build a module or platform
991 # Create autogen code and makefile for a module or platform, and the launch
992 # "make" command to build it
994 # @param Target The target of build command
995 # @param Platform The platform file
996 # @param Module The module file
997 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
998 # @param ToolChain The name of toolchain to build
999 # @param Arch The arch of the module/platform
1000 # @param CreateDepModuleCodeFile Flag used to indicate creating code
1001 # for dependent modules/Libraries
1002 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
1003 # for dependent modules/Libraries
1005 def _Build(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True, BuildModule
=False):
1006 if AutoGenObject
== None:
1009 # skip file generation for cleanxxx targets, run and fds target
1010 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1011 # for target which must generate AutoGen code and makefile
1012 if not self
.SkipAutoGen
or Target
== 'genc':
1013 self
.Progress
.Start("Generating code")
1014 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
1015 self
.Progress
.Stop("done!")
1016 if Target
== "genc":
1019 if not self
.SkipAutoGen
or Target
== 'genmake':
1020 self
.Progress
.Start("Generating makefile")
1021 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
1022 #AutoGenObject.CreateAsBuiltInf()
1023 self
.Progress
.Stop("done!")
1024 if Target
== "genmake":
1027 # always recreate top/platform makefile when clean, just in case of inconsistency
1028 AutoGenObject
.CreateCodeFile(False)
1029 AutoGenObject
.CreateMakeFile(False)
1031 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
1032 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
1034 BuildCommand
= AutoGenObject
.BuildCommand
1035 if BuildCommand
== None or len(BuildCommand
) == 0:
1036 EdkLogger
.error("build", OPTION_MISSING
,
1037 "No build command found for this module. "
1038 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
1039 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
1040 ExtraData
=str(AutoGenObject
))
1044 LaunchCommand(AutoGenObject
.GenFdsCommand
, AutoGenObject
.MakeFileDir
)
1049 RunDir
= os
.path
.normpath(os
.path
.join(AutoGenObject
.BuildDir
, 'IA32'))
1050 Command
= '.\SecMain'
1052 LaunchCommand(Command
, RunDir
)
1056 BuildCommand
= BuildCommand
+ [Target
]
1058 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
1059 self
.CreateAsBuiltInf()
1063 if Target
== 'libraries':
1070 if Target
== 'cleanall':
1072 #os.rmdir(AutoGenObject.BuildDir)
1073 RemoveDirectory(AutoGenObject
.BuildDir
, True)
1075 # First should close DB.
1078 RemoveDirectory(gBuildCacheDir
, True)
1079 except WindowsError, X
:
1080 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
1083 ## Rebase module image and Get function address for the input module list.
1085 def _RebaseModule (self
, MapBuffer
, BaseAddress
, ModuleList
, AddrIsOffset
= True, ModeIsSmm
= False):
1087 AddrIsOffset
= False
1088 InfFileNameList
= ModuleList
.keys()
1089 #InfFileNameList.sort()
1090 for InfFile
in InfFileNameList
:
1091 sys
.stdout
.write (".")
1093 ModuleInfo
= ModuleList
[InfFile
]
1094 ModuleName
= ModuleInfo
.BaseName
1095 ModuleOutputImage
= ModuleInfo
.Image
.FileName
1096 ModuleDebugImage
= os
.path
.join(ModuleInfo
.DebugDir
, ModuleInfo
.BaseName
+ '.efi')
1097 ## for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1099 BaseAddress
= BaseAddress
- ModuleInfo
.Image
.Size
1101 # Update Image to new BaseAddress by GenFw tool
1103 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
1104 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
1107 # Set new address to the section header only for SMM driver.
1109 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
1110 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
1112 # Collect funtion address from Map file
1114 ImageMapTable
= ModuleOutputImage
.replace('.efi', '.map')
1116 if os
.path
.exists(ImageMapTable
):
1117 OrigImageBaseAddress
= 0
1118 ImageMap
= open (ImageMapTable
, 'r')
1119 for LinStr
in ImageMap
:
1120 if len (LinStr
.strip()) == 0:
1123 # Get the preferred address set on link time.
1125 if LinStr
.find ('Preferred load address is') != -1:
1126 StrList
= LinStr
.split()
1127 OrigImageBaseAddress
= int (StrList
[len(StrList
) - 1], 16)
1129 StrList
= LinStr
.split()
1130 if len (StrList
) > 4:
1131 if StrList
[3] == 'f' or StrList
[3] =='F':
1133 RelativeAddress
= int (StrList
[2], 16) - OrigImageBaseAddress
1134 FunctionList
.append ((Name
, RelativeAddress
))
1135 if ModuleInfo
.Arch
== 'IPF' and Name
.endswith('_ModuleEntryPoint'):
1137 # Get the real entry point address for IPF image.
1139 ModuleInfo
.Image
.EntryPoint
= RelativeAddress
1142 # Add general information.
1145 MapBuffer
.write('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
1147 MapBuffer
.write('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName
, 0 - BaseAddress
, 0 - (BaseAddress
+ ModuleInfo
.Image
.EntryPoint
)))
1149 MapBuffer
.write('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
1151 # Add guid and general seciton section.
1153 TextSectionAddress
= 0
1154 DataSectionAddress
= 0
1155 for SectionHeader
in ModuleInfo
.Image
.SectionHeaderList
:
1156 if SectionHeader
[0] == '.text':
1157 TextSectionAddress
= SectionHeader
[1]
1158 elif SectionHeader
[0] in ['.data', '.sdata']:
1159 DataSectionAddress
= SectionHeader
[1]
1161 MapBuffer
.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo
.Guid
, 0 - (BaseAddress
+ TextSectionAddress
), 0 - (BaseAddress
+ DataSectionAddress
)))
1163 MapBuffer
.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo
.Guid
, BaseAddress
+ TextSectionAddress
, BaseAddress
+ DataSectionAddress
))
1165 # Add debug image full path.
1167 MapBuffer
.write('(IMAGE=%s)\n\n' % (ModuleDebugImage
))
1169 # Add funtion address
1171 for Function
in FunctionList
:
1173 MapBuffer
.write(' -0x%010X %s\n' % (0 - (BaseAddress
+ Function
[1]), Function
[0]))
1175 MapBuffer
.write(' 0x%010X %s\n' % (BaseAddress
+ Function
[1], Function
[0]))
1179 # for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1182 BaseAddress
= BaseAddress
+ ModuleInfo
.Image
.Size
1184 ## Collect MAP information of all FVs
1186 def _CollectFvMapBuffer (self
, MapBuffer
, Wa
, ModuleList
):
1188 # First get the XIP base address for FV map file.
1189 GuidPattern
= re
.compile("[-a-fA-F0-9]+")
1190 GuidName
= re
.compile("\(GUID=[-a-fA-F0-9]+")
1191 for FvName
in Wa
.FdfProfile
.FvDict
.keys():
1192 FvMapBuffer
= os
.path
.join(Wa
.FvDir
, FvName
+ '.Fv.map')
1193 if not os
.path
.exists(FvMapBuffer
):
1195 FvMap
= open(FvMapBuffer
, 'r')
1196 #skip FV size information
1202 MatchGuid
= GuidPattern
.match(Line
)
1203 if MatchGuid
!= None:
1205 # Replace GUID with module name
1207 GuidString
= MatchGuid
.group()
1208 if GuidString
.upper() in ModuleList
:
1209 Line
= Line
.replace(GuidString
, ModuleList
[GuidString
.upper()].Name
)
1210 MapBuffer
.write('%s' % (Line
))
1212 # Add the debug image full path.
1214 MatchGuid
= GuidName
.match(Line
)
1215 if MatchGuid
!= None:
1216 GuidString
= MatchGuid
.group().split("=")[1]
1217 if GuidString
.upper() in ModuleList
:
1218 MapBuffer
.write('(IMAGE=%s)\n' % (os
.path
.join(ModuleList
[GuidString
.upper()].DebugDir
, ModuleList
[GuidString
.upper()].Name
+ '.efi')))
1222 ## Collect MAP information of all modules
1224 def _CollectModuleMapBuffer (self
, MapBuffer
, ModuleList
):
1225 sys
.stdout
.write ("Generate Load Module At Fix Address Map")
1227 PatchEfiImageList
= []
1235 # reserve 4K size in SMRAM to make SMM module address not from 0.
1237 IsIpfPlatform
= False
1238 if 'IPF' in self
.ArchList
:
1239 IsIpfPlatform
= True
1240 for ModuleGuid
in ModuleList
:
1241 Module
= ModuleList
[ModuleGuid
]
1242 GlobalData
.gProcessingFile
= "%s [%s, %s, %s]" % (Module
.MetaFile
, Module
.Arch
, Module
.ToolChain
, Module
.BuildTarget
)
1244 OutputImageFile
= ''
1245 for ResultFile
in Module
.CodaTargetList
:
1246 if str(ResultFile
.Target
).endswith('.efi'):
1248 # module list for PEI, DXE, RUNTIME and SMM
1250 OutputImageFile
= os
.path
.join(Module
.OutputDir
, Module
.Name
+ '.efi')
1251 ImageClass
= PeImageClass (OutputImageFile
)
1252 if not ImageClass
.IsValid
:
1253 EdkLogger
.error("build", FILE_PARSE_FAILURE
, ExtraData
=ImageClass
.ErrorInfo
)
1254 ImageInfo
= PeImageInfo(Module
.Name
, Module
.Guid
, Module
.Arch
, Module
.OutputDir
, Module
.DebugDir
, ImageClass
)
1255 if Module
.ModuleType
in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER','PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:
1256 PeiModuleList
[Module
.MetaFile
] = ImageInfo
1257 PeiSize
+= ImageInfo
.Image
.Size
1258 elif Module
.ModuleType
in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:
1259 BtModuleList
[Module
.MetaFile
] = ImageInfo
1260 BtSize
+= ImageInfo
.Image
.Size
1261 elif Module
.ModuleType
in ['DXE_RUNTIME_DRIVER', 'RT_DRIVER', 'DXE_SAL_DRIVER', 'SAL_RT_DRIVER']:
1262 RtModuleList
[Module
.MetaFile
] = ImageInfo
1263 #IPF runtime driver needs to be at 2 page alignment.
1264 if IsIpfPlatform
and ImageInfo
.Image
.Size
% 0x2000 != 0:
1265 ImageInfo
.Image
.Size
= (ImageInfo
.Image
.Size
/ 0x2000 + 1) * 0x2000
1266 RtSize
+= ImageInfo
.Image
.Size
1267 elif Module
.ModuleType
in ['SMM_CORE', 'DXE_SMM_DRIVER']:
1268 SmmModuleList
[Module
.MetaFile
] = ImageInfo
1269 SmmSize
+= ImageInfo
.Image
.Size
1270 if Module
.ModuleType
== 'DXE_SMM_DRIVER':
1271 PiSpecVersion
= '0x00000000'
1272 if 'PI_SPECIFICATION_VERSION' in Module
.Module
.Specification
:
1273 PiSpecVersion
= Module
.Module
.Specification
['PI_SPECIFICATION_VERSION']
1274 # for PI specification < PI1.1, DXE_SMM_DRIVER also runs as BOOT time driver.
1275 if int(PiSpecVersion
, 16) < 0x0001000A:
1276 BtModuleList
[Module
.MetaFile
] = ImageInfo
1277 BtSize
+= ImageInfo
.Image
.Size
1280 # EFI image is final target.
1281 # Check EFI image contains patchable FixAddress related PCDs.
1283 if OutputImageFile
!= '':
1284 ModuleIsPatch
= False
1285 for Pcd
in Module
.ModulePcdList
:
1286 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1287 ModuleIsPatch
= True
1289 if not ModuleIsPatch
:
1290 for Pcd
in Module
.LibraryPcdList
:
1291 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1292 ModuleIsPatch
= True
1295 if not ModuleIsPatch
:
1298 # Module includes the patchable load fix address PCDs.
1299 # It will be fixed up later.
1301 PatchEfiImageList
.append (OutputImageFile
)
1304 # Get Top Memory address
1306 ReservedRuntimeMemorySize
= 0
1307 TopMemoryAddress
= 0
1308 if self
.LoadFixAddress
== 0xFFFFFFFFFFFFFFFF:
1309 TopMemoryAddress
= 0
1311 TopMemoryAddress
= self
.LoadFixAddress
1312 if TopMemoryAddress
< RtSize
+ BtSize
+ PeiSize
:
1313 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS is too low to load driver")
1314 # Make IPF runtime driver at 2 page alignment.
1316 ReservedRuntimeMemorySize
= TopMemoryAddress
% 0x2000
1317 RtSize
= RtSize
+ ReservedRuntimeMemorySize
1320 # Patch FixAddress related PCDs into EFI image
1322 for EfiImage
in PatchEfiImageList
:
1323 EfiImageMap
= EfiImage
.replace('.efi', '.map')
1324 if not os
.path
.exists(EfiImageMap
):
1327 # Get PCD offset in EFI image by GenPatchPcdTable function
1329 PcdTable
= parsePcdInfoFromMapFile(EfiImageMap
, EfiImage
)
1331 # Patch real PCD value by PatchPcdValue tool
1333 for PcdInfo
in PcdTable
:
1335 if PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE
:
1336 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE
, str (PeiSize
/0x1000))
1337 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE
:
1338 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE
, str (BtSize
/0x1000))
1339 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE
:
1340 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE
, str (RtSize
/0x1000))
1341 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE
and len (SmmModuleList
) > 0:
1342 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE
, str (SmmSize
/0x1000))
1343 if ReturnValue
!= 0:
1344 EdkLogger
.error("build", PARAMETER_INVALID
, "Patch PCD value failed", ExtraData
=ErrorInfo
)
1346 MapBuffer
.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize
/0x1000))
1347 MapBuffer
.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize
/0x1000))
1348 MapBuffer
.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize
/0x1000))
1349 if len (SmmModuleList
) > 0:
1350 MapBuffer
.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize
/0x1000))
1352 PeiBaseAddr
= TopMemoryAddress
- RtSize
- BtSize
1353 BtBaseAddr
= TopMemoryAddress
- RtSize
1354 RtBaseAddr
= TopMemoryAddress
- ReservedRuntimeMemorySize
1356 self
._RebaseModule
(MapBuffer
, PeiBaseAddr
, PeiModuleList
, TopMemoryAddress
== 0)
1357 self
._RebaseModule
(MapBuffer
, BtBaseAddr
, BtModuleList
, TopMemoryAddress
== 0)
1358 self
._RebaseModule
(MapBuffer
, RtBaseAddr
, RtModuleList
, TopMemoryAddress
== 0)
1359 self
._RebaseModule
(MapBuffer
, 0x1000, SmmModuleList
, AddrIsOffset
= False, ModeIsSmm
= True)
1360 MapBuffer
.write('\n\n')
1361 sys
.stdout
.write ("\n")
1364 ## Save platform Map file
1366 def _SaveMapFile (self
, MapBuffer
, Wa
):
1368 # Map file path is got.
1370 MapFilePath
= os
.path
.join(Wa
.BuildDir
, Wa
.Name
+ '.map')
1372 # Save address map into MAP file.
1374 SaveFileOnChange(MapFilePath
, MapBuffer
.getvalue(), False)
1376 if self
.LoadFixAddress
!= 0:
1377 sys
.stdout
.write ("\nLoad Module At Fix Address Map file can be found at %s\n" %(MapFilePath))
1380 ## Build active platform for different build targets and different tool chains
1382 def _BuildPlatform(self
):
1383 for BuildTarget
in self
.BuildTargetList
:
1384 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1385 for ToolChain
in self
.ToolChainList
:
1386 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1387 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1388 Wa
= WorkspaceAutoGen(
1405 self
.Fdf
= Wa
.FdfFile
1406 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1407 self
.BuildReport
.AddPlatformReport(Wa
)
1408 self
.Progress
.Stop("done!")
1409 for Arch
in Wa
.ArchList
:
1410 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1411 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1412 self
._BuildPa
(self
.Target
, Pa
)
1414 # Create MAP file when Load Fix Address is enabled.
1415 if self
.Target
in ["", "all", "fds"]:
1416 for Arch
in Wa
.ArchList
:
1417 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1419 # Check whether the set fix address is above 4G for 32bit image.
1421 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1422 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platform with IA32 or ARM arch modules")
1427 for Pa
in Wa
.AutoGenObjectList
:
1428 for Ma
in Pa
.ModuleAutoGenList
:
1431 if not Ma
.IsLibrary
:
1432 ModuleList
[Ma
.Guid
.upper()] = Ma
1434 MapBuffer
= StringIO('')
1435 if self
.LoadFixAddress
!= 0:
1437 # Rebase module to the preferred memory address before GenFds
1439 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1442 # create FDS again for the updated EFI image
1444 self
._Build
("fds", Wa
)
1447 # Create MAP file for all platform FVs after GenFds.
1449 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1451 # Save MAP buffer into MAP file.
1453 self
._SaveMapFile
(MapBuffer
, Wa
)
1455 ## Build active module for different build targets, different tool chains and different archs
1457 def _BuildModule(self
):
1458 for BuildTarget
in self
.BuildTargetList
:
1459 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1460 for ToolChain
in self
.ToolChainList
:
1461 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1462 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1464 # module build needs platform build information, so get platform
1467 Wa
= WorkspaceAutoGen(
1485 self
.Fdf
= Wa
.FdfFile
1486 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1487 Wa
.CreateMakeFile(False)
1488 self
.Progress
.Stop("done!")
1490 for Arch
in Wa
.ArchList
:
1491 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1492 Ma
= ModuleAutoGen(Wa
, self
.ModuleFile
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1493 if Ma
== None: continue
1495 if not Ma
.IsBinaryModule
:
1496 self
._Build
(self
.Target
, Ma
, BuildModule
=True)
1498 self
.BuildReport
.AddPlatformReport(Wa
, MaList
)
1503 "Module for [%s] is not a component of active platform."\
1504 " Please make sure that the ARCH and inf file path are"\
1505 " given in the same as in [%s]" %\
1506 (', '.join(Wa
.ArchList
), self
.PlatformFile
),
1507 ExtraData
=self
.ModuleFile
1509 # Create MAP file when Load Fix Address is enabled.
1510 if self
.Target
== "fds" and self
.Fdf
:
1511 for Arch
in Wa
.ArchList
:
1513 # Check whether the set fix address is above 4G for 32bit image.
1515 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1516 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1521 for Pa
in Wa
.AutoGenObjectList
:
1522 for Ma
in Pa
.ModuleAutoGenList
:
1525 if not Ma
.IsLibrary
:
1526 ModuleList
[Ma
.Guid
.upper()] = Ma
1528 MapBuffer
= StringIO('')
1529 if self
.LoadFixAddress
!= 0:
1531 # Rebase module to the preferred memory address before GenFds
1533 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1535 # create FDS again for the updated EFI image
1537 self
._Build
("fds", Wa
)
1539 # Create MAP file for all platform FVs after GenFds.
1541 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1543 # Save MAP buffer into MAP file.
1545 self
._SaveMapFile
(MapBuffer
, Wa
)
1547 ## Build a platform in multi-thread mode
1549 def _MultiThreadBuildPlatform(self
):
1550 for BuildTarget
in self
.BuildTargetList
:
1551 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1552 for ToolChain
in self
.ToolChainList
:
1553 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1554 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1555 Wa
= WorkspaceAutoGen(
1572 self
.Fdf
= Wa
.FdfFile
1573 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1574 self
.BuildReport
.AddPlatformReport(Wa
)
1575 Wa
.CreateMakeFile(False)
1577 # multi-thread exit flag
1578 ExitFlag
= threading
.Event()
1580 for Arch
in Wa
.ArchList
:
1581 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1582 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1586 for Module
in Pa
.Platform
.Modules
:
1587 # Get ModuleAutoGen object to generate C code file and makefile
1588 Ma
= ModuleAutoGen(Wa
, Module
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1591 # Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'
1592 if self
.Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1593 # for target which must generate AutoGen code and makefile
1594 if not self
.SkipAutoGen
or self
.Target
== 'genc':
1595 Ma
.CreateCodeFile(True)
1596 if self
.Target
== "genc":
1599 if not self
.SkipAutoGen
or self
.Target
== 'genmake':
1600 Ma
.CreateMakeFile(True)
1601 Ma
.CreateAsBuiltInf()
1602 if self
.Target
== "genmake":
1605 self
.Progress
.Stop("done!")
1608 # Generate build task for the module
1609 Bt
= BuildTask
.New(ModuleMakeUnit(Ma
, self
.Target
))
1610 # Break build if any build thread has error
1611 if BuildTask
.HasError():
1612 # we need a full version of makefile for platform
1614 BuildTask
.WaitForComplete()
1615 Pa
.CreateMakeFile(False)
1616 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1617 # Start task scheduler
1618 if not BuildTask
.IsOnGoing():
1619 BuildTask
.StartScheduler(self
.ThreadNumber
, ExitFlag
)
1621 # in case there's an interruption. we need a full version of makefile for platform
1622 Pa
.CreateMakeFile(False)
1623 if BuildTask
.HasError():
1624 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1627 # Save temp tables to a TmpTableDict.
1629 for Key
in Wa
.BuildDatabase
._CACHE
_:
1630 if Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
:
1631 if TemporaryTablePattern
.match(Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
):
1632 TmpTableDict
[Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
] = Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Cur
1635 # All modules have been put in build tasks queue. Tell task scheduler
1636 # to exit if all tasks are completed
1639 BuildTask
.WaitForComplete()
1642 # Check for build error, and raise exception if one
1643 # has been signaled.
1645 if BuildTask
.HasError():
1646 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1648 # Create MAP file when Load Fix Address is enabled.
1649 if self
.Target
in ["", "all", "fds"]:
1650 for Arch
in Wa
.ArchList
:
1652 # Check whether the set fix address is above 4G for 32bit image.
1654 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1655 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1660 for Pa
in Wa
.AutoGenObjectList
:
1661 for Ma
in Pa
.ModuleAutoGenList
:
1664 if not Ma
.IsLibrary
:
1665 ModuleList
[Ma
.Guid
.upper()] = Ma
1667 # Rebase module to the preferred memory address before GenFds
1669 MapBuffer
= StringIO('')
1670 if self
.LoadFixAddress
!= 0:
1671 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1675 # Generate FD image if there's a FDF file found
1677 LaunchCommand(Wa
.GenFdsCommand
, os
.getcwd())
1680 # Create MAP file for all platform FVs after GenFds.
1682 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1684 # Save MAP buffer into MAP file.
1686 self
._SaveMapFile
(MapBuffer
, Wa
)
1688 ## Generate GuidedSectionTools.txt in the FV directories.
1690 def CreateGuidedSectionToolsFile(self
):
1691 for BuildTarget
in self
.BuildTargetList
:
1692 for ToolChain
in self
.ToolChainList
:
1693 Wa
= WorkspaceAutoGen(
1710 if not os
.path
.exists(FvDir
):
1713 for Arch
in self
.ArchList
:
1714 # Build up the list of supported architectures for this build
1715 prefix
= '%s_%s_%s_' % (BuildTarget
, ToolChain
, Arch
)
1717 # Look through the tool definitions for GUIDed tools
1719 for (attrib
, value
) in self
.ToolDef
.ToolsDefTxtDictionary
.iteritems():
1720 if attrib
.upper().endswith('_GUID'):
1721 split
= attrib
.split('_')
1722 thisPrefix
= '_'.join(split
[0:3]) + '_'
1723 if thisPrefix
== prefix
:
1724 guid
= self
.ToolDef
.ToolsDefTxtDictionary
[attrib
]
1727 path
= '_'.join(split
[0:4]) + '_PATH'
1728 path
= self
.ToolDef
.ToolsDefTxtDictionary
[path
]
1729 path
= self
.GetFullPathOfTool(path
)
1730 guidAttribs
.append((guid
, toolName
, path
))
1732 # Write out GuidedSecTools.txt
1733 toolsFile
= os
.path
.join(FvDir
, 'GuidedSectionTools.txt')
1734 toolsFile
= open(toolsFile
, 'wt')
1735 for guidedSectionTool
in guidAttribs
:
1736 print >> toolsFile
, ' '.join(guidedSectionTool
)
1739 ## Returns the full path of the tool.
1741 def GetFullPathOfTool (self
, tool
):
1742 if os
.path
.exists(tool
):
1743 return os
.path
.realpath(tool
)
1745 # We need to search for the tool using the
1746 # PATH environment variable.
1747 for dirInPath
in os
.environ
['PATH'].split(os
.pathsep
):
1748 foundPath
= os
.path
.join(dirInPath
, tool
)
1749 if os
.path
.exists(foundPath
):
1750 return os
.path
.realpath(foundPath
)
1752 # If the tool was not found in the path then we just return
1756 ## Launch the module or platform build
1759 if not self
.ModuleFile
:
1760 if not self
.SpawnMode
or self
.Target
not in ["", "all"]:
1761 self
.SpawnMode
= False
1762 self
._BuildPlatform
()
1764 self
._MultiThreadBuildPlatform
()
1765 self
.CreateGuidedSectionToolsFile()
1767 self
.SpawnMode
= False
1770 ## Do some clean-up works when error occurred
1771 def Relinquish(self
):
1772 OldLogLevel
= EdkLogger
.GetLevel()
1773 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
1774 #self.DumpBuildData()
1775 Utils
.Progressor
.Abort()
1776 if self
.SpawnMode
== True:
1778 EdkLogger
.SetLevel(OldLogLevel
)
1780 def DumpBuildData(self
):
1781 CacheDirectory
= os
.path
.join(self
.WorkspaceDir
, gBuildCacheDir
)
1782 Utils
.CreateDirectory(CacheDirectory
)
1783 Utils
.DataDump(Utils
.gFileTimeStampCache
, os
.path
.join(CacheDirectory
, "gFileTimeStampCache"))
1784 Utils
.DataDump(Utils
.gDependencyDatabase
, os
.path
.join(CacheDirectory
, "gDependencyDatabase"))
1786 def RestoreBuildData(self
):
1787 FilePath
= os
.path
.join(self
.WorkspaceDir
, gBuildCacheDir
, "gFileTimeStampCache")
1788 if Utils
.gFileTimeStampCache
== {} and os
.path
.isfile(FilePath
):
1789 Utils
.gFileTimeStampCache
= Utils
.DataRestore(FilePath
)
1790 if Utils
.gFileTimeStampCache
== None:
1791 Utils
.gFileTimeStampCache
= {}
1793 FilePath
= os
.path
.join(self
.WorkspaceDir
, gBuildCacheDir
, "gDependencyDatabase")
1794 if Utils
.gDependencyDatabase
== {} and os
.path
.isfile(FilePath
):
1795 Utils
.gDependencyDatabase
= Utils
.DataRestore(FilePath
)
1796 if Utils
.gDependencyDatabase
== None:
1797 Utils
.gDependencyDatabase
= {}
1799 def ParseDefines(DefineList
=[]):
1801 if DefineList
!= None:
1802 for Define
in DefineList
:
1803 DefineTokenList
= Define
.split("=", 1)
1804 if not GlobalData
.gMacroNamePattern
.match(DefineTokenList
[0]):
1805 EdkLogger
.error('build', FORMAT_INVALID
,
1806 "The macro name must be in the pattern [A-Z][A-Z0-9_]*",
1807 ExtraData
=DefineTokenList
[0])
1809 if len(DefineTokenList
) == 1:
1810 DefineDict
[DefineTokenList
[0]] = "TRUE"
1812 DefineDict
[DefineTokenList
[0]] = DefineTokenList
[1].strip()
1816 def SingleCheckCallback(option
, opt_str
, value
, parser
):
1817 if option
not in gParamCheck
:
1818 setattr(parser
.values
, option
.dest
, value
)
1819 gParamCheck
.append(option
)
1821 parser
.error("Option %s only allows one instance in command line!" % option
)
1823 ## Parse command line options
1825 # Using standard Python module optparse to parse command line option of this tool.
1827 # @retval Opt A optparse.Values object containing the parsed options
1828 # @retval Args Target of build command
1830 def MyOptionParser():
1831 Parser
= OptionParser(description
=__copyright__
,version
=__version__
,prog
="build.exe",usage
="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")
1832 Parser
.add_option("-a", "--arch", action
="append", type="choice", choices
=['IA32','X64','IPF','EBC','ARM', 'AARCH64'], dest
="TargetArch",
1833 help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")
1834 Parser
.add_option("-p", "--platform", action
="callback", type="string", dest
="PlatformFile", callback
=SingleCheckCallback
,
1835 help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")
1836 Parser
.add_option("-m", "--module", action
="callback", type="string", dest
="ModuleFile", callback
=SingleCheckCallback
,
1837 help="Build the module specified by the INF file name argument.")
1838 Parser
.add_option("-b", "--buildtarget", type="string", dest
="BuildTarget", help="Using the TARGET to build the platform, overriding target.txt's TARGET definition.",
1840 Parser
.add_option("-t", "--tagname", action
="append", type="string", dest
="ToolChain",
1841 help="Using the Tool Chain Tagname to build the platform, overriding target.txt's TOOL_CHAIN_TAG definition.")
1842 Parser
.add_option("-x", "--sku-id", action
="callback", type="string", dest
="SkuId", callback
=SingleCheckCallback
,
1843 help="Using this name of SKU ID to build the platform, overriding SKUID_IDENTIFIER in DSC file.")
1845 Parser
.add_option("-n", action
="callback", type="int", dest
="ThreadNumber", callback
=SingleCheckCallback
,
1846 help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. Less than 2 will disable multi-thread builds.")
1848 Parser
.add_option("-f", "--fdf", action
="callback", type="string", dest
="FdfFile", callback
=SingleCheckCallback
,
1849 help="The name of the FDF file to use, which overrides the setting in the DSC file.")
1850 Parser
.add_option("-r", "--rom-image", action
="append", type="string", dest
="RomImage", default
=[],
1851 help="The name of FD to be generated. The name must be from [FD] section in FDF file.")
1852 Parser
.add_option("-i", "--fv-image", action
="append", type="string", dest
="FvImage", default
=[],
1853 help="The name of FV to be generated. The name must be from [FV] section in FDF file.")
1854 Parser
.add_option("-C", "--capsule-image", action
="append", type="string", dest
="CapName", default
=[],
1855 help="The name of Capsule to be generated. The name must be from [Capsule] section in FDF file.")
1856 Parser
.add_option("-u", "--skip-autogen", action
="store_true", dest
="SkipAutoGen", help="Skip AutoGen step.")
1857 Parser
.add_option("-e", "--re-parse", action
="store_true", dest
="Reparse", help="Re-parse all meta-data files.")
1859 Parser
.add_option("-c", "--case-insensitive", action
="store_true", dest
="CaseInsensitive", default
=False, help="Don't check case of file name.")
1861 Parser
.add_option("-w", "--warning-as-error", action
="store_true", dest
="WarningAsError", help="Treat warning in tools as error.")
1862 Parser
.add_option("-j", "--log", action
="store", dest
="LogFile", help="Put log in specified file as well as on console.")
1864 Parser
.add_option("-s", "--silent", action
="store_true", type=None, dest
="SilentMode",
1865 help="Make use of silent mode of (n)make.")
1866 Parser
.add_option("-q", "--quiet", action
="store_true", type=None, help="Disable all messages except FATAL ERRORS.")
1867 Parser
.add_option("-v", "--verbose", action
="store_true", type=None, help="Turn on verbose output with informational messages printed, "\
1868 "including library instances selected, final dependency expression, "\
1869 "and warning messages, etc.")
1870 Parser
.add_option("-d", "--debug", action
="store", type="int", help="Enable debug messages at specified level.")
1871 Parser
.add_option("-D", "--define", action
="append", type="string", dest
="Macros", help="Macro: \"Name [= Value]\".")
1873 Parser
.add_option("-y", "--report-file", action
="store", dest
="ReportFile", help="Create/overwrite the report to the specified filename.")
1874 Parser
.add_option("-Y", "--report-type", action
="append", type="choice", choices
=['PCD','LIBRARY','FLASH','DEPEX','BUILD_FLAGS','FIXED_ADDRESS', 'EXECUTION_ORDER'], dest
="ReportType", default
=[],
1875 help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, EXECUTION_ORDER]. "\
1876 "To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")
1877 Parser
.add_option("-F", "--flag", action
="store", type="string", dest
="Flag",
1878 help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\
1879 "This option can also be specified by setting *_*_*_BUILD_FLAGS in [BuildOptions] section of platform DSC. If they are both specified, this value "\
1880 "will override the setting in [BuildOptions] section of platform DSC.")
1881 Parser
.add_option("-N", "--no-cache", action
="store_true", dest
="DisableCache", default
=False, help="Disable build cache mechanism")
1883 (Opt
, Args
)=Parser
.parse_args()
1886 ## Tool entrance method
1888 # This method mainly dispatch specific methods per the command line options.
1889 # If no error found, return zero value so the caller of this tool can know
1890 # if it's executed successfully or not.
1892 # @retval 0 Tool was successful
1893 # @retval 1 Tool failed
1896 StartTime
= time
.time()
1898 # Initialize log system
1899 EdkLogger
.Initialize()
1902 # Parse the options and args
1904 (Option
, Target
) = MyOptionParser()
1905 GlobalData
.gOptions
= Option
1906 GlobalData
.gCaseInsensitive
= Option
.CaseInsensitive
1909 if Option
.verbose
!= None:
1910 EdkLogger
.SetLevel(EdkLogger
.VERBOSE
)
1911 elif Option
.quiet
!= None:
1912 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
1913 elif Option
.debug
!= None:
1914 EdkLogger
.SetLevel(Option
.debug
+ 1)
1916 EdkLogger
.SetLevel(EdkLogger
.INFO
)
1918 if Option
.LogFile
!= None:
1919 EdkLogger
.SetLogFile(Option
.LogFile
)
1921 if Option
.WarningAsError
== True:
1922 EdkLogger
.SetWarningAsError()
1924 if platform
.platform().find("Windows") >= 0:
1925 GlobalData
.gIsWindows
= True
1927 GlobalData
.gIsWindows
= False
1929 EdkLogger
.quiet("Build environment: %s" % platform
.platform())
1930 EdkLogger
.quiet(time
.strftime("Build start time: %H:%M:%S, %b.%d %Y\n", time
.localtime()));
1934 if len(Target
) == 0:
1936 elif len(Target
) >= 2:
1937 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "More than one targets are not supported.",
1938 ExtraData
="Please select one of: %s" %(' '.join(gSupportedTarget
)))
1940 Target
= Target
[0].lower()
1942 if Target
not in gSupportedTarget
:
1943 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "Not supported target [%s]." % Target
,
1944 ExtraData
="Please select one of: %s" %(' '.join(gSupportedTarget
)))
1947 # Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH
1950 GlobalData
.gCommandLineDefines
.update(ParseDefines(Option
.Macros
))
1952 Workspace
= os
.getenv("WORKSPACE")
1954 # Get files real name in workspace dir
1956 GlobalData
.gAllFiles
= Utils
.DirCache(Workspace
)
1958 WorkingDirectory
= os
.getcwd()
1959 if not Option
.ModuleFile
:
1960 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.inf')))
1961 FileNum
= len(FileList
)
1963 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "There are %d INF files in %s." % (FileNum
, WorkingDirectory
),
1964 ExtraData
="Please use '-m <INF_FILE_PATH>' switch to choose one.")
1966 Option
.ModuleFile
= NormFile(FileList
[0], Workspace
)
1968 if Option
.ModuleFile
:
1969 if os
.path
.isabs (Option
.ModuleFile
):
1970 if os
.path
.normcase (os
.path
.normpath(Option
.ModuleFile
)).find (Workspace
) == 0:
1971 Option
.ModuleFile
= NormFile(os
.path
.normpath(Option
.ModuleFile
), Workspace
)
1972 Option
.ModuleFile
= PathClass(Option
.ModuleFile
, Workspace
)
1973 ErrorCode
, ErrorInfo
= Option
.ModuleFile
.Validate(".inf", False)
1975 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
1977 if Option
.PlatformFile
!= None:
1978 if os
.path
.isabs (Option
.PlatformFile
):
1979 if os
.path
.normcase (os
.path
.normpath(Option
.PlatformFile
)).find (Workspace
) == 0:
1980 Option
.PlatformFile
= NormFile(os
.path
.normpath(Option
.PlatformFile
), Workspace
)
1981 Option
.PlatformFile
= PathClass(Option
.PlatformFile
, Workspace
)
1983 if Option
.FdfFile
!= None:
1984 if os
.path
.isabs (Option
.FdfFile
):
1985 if os
.path
.normcase (os
.path
.normpath(Option
.FdfFile
)).find (Workspace
) == 0:
1986 Option
.FdfFile
= NormFile(os
.path
.normpath(Option
.FdfFile
), Workspace
)
1987 Option
.FdfFile
= PathClass(Option
.FdfFile
, Workspace
)
1988 ErrorCode
, ErrorInfo
= Option
.FdfFile
.Validate(".fdf", False)
1990 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
1992 if Option
.Flag
!= None and Option
.Flag
not in ['-c', '-s']:
1993 EdkLogger
.error("build", OPTION_VALUE_INVALID
, "UNI flag must be one of -c or -s")
1995 MyBuild
= Build(Target
, Workspace
, Option
)
1996 GlobalData
.gCommandLineDefines
['ARCH'] = ' '.join(MyBuild
.ArchList
)
1998 # Drop temp tables to avoid database locked.
1999 for TmpTableName
in TmpTableDict
:
2000 SqlCommand
= """drop table IF EXISTS %s""" % TmpTableName
2001 TmpTableDict
[TmpTableName
].execute(SqlCommand
)
2002 #MyBuild.DumpBuildData()
2003 except FatalError
, X
:
2005 # for multi-thread build exits safely
2006 MyBuild
.Relinquish()
2007 if Option
!= None and Option
.debug
!= None:
2008 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2009 ReturnCode
= X
.args
[0]
2011 # error from Fdf parser
2013 # for multi-thread build exits safely
2014 MyBuild
.Relinquish()
2015 if Option
!= None and Option
.debug
!= None:
2016 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2018 EdkLogger
.error(X
.ToolName
, FORMAT_INVALID
, File
=X
.FileName
, Line
=X
.LineNumber
, ExtraData
=X
.Message
, RaiseError
= False)
2019 ReturnCode
= FORMAT_INVALID
2020 except KeyboardInterrupt:
2021 ReturnCode
= ABORT_ERROR
2022 if Option
!= None and Option
.debug
!= None:
2023 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2026 # for multi-thread build exits safely
2027 MyBuild
.Relinquish()
2029 # try to get the meta-file from the object causing exception
2030 Tb
= sys
.exc_info()[-1]
2031 MetaFile
= GlobalData
.gProcessingFile
2033 if 'self' in Tb
.tb_frame
.f_locals
and hasattr(Tb
.tb_frame
.f_locals
['self'], 'MetaFile'):
2034 MetaFile
= Tb
.tb_frame
.f_locals
['self'].MetaFile
2039 "Unknown fatal error when processing [%s]" % MetaFile
,
2040 ExtraData
="\n(Please send email to edk2-buildtools-devel@lists.sourceforge.net for help, attaching following call stack trace!)\n",
2043 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2044 ReturnCode
= CODE_ERROR
2046 Utils
.Progressor
.Abort()
2050 elif ReturnCode
== ABORT_ERROR
:
2051 Conclusion
= "Aborted"
2053 Conclusion
= "Failed"
2054 FinishTime
= time
.time()
2055 BuildDuration
= time
.gmtime(int(round(FinishTime
- StartTime
)))
2056 BuildDurationStr
= ""
2057 if BuildDuration
.tm_yday
> 1:
2058 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
) + ", %d day(s)"%(BuildDuration
.tm_yday
- 1)
2060 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
)
2062 MyBuild
.BuildReport
.GenerateReport(BuildDurationStr
)
2064 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
2065 EdkLogger
.quiet("\n- %s -" % Conclusion
)
2066 EdkLogger
.quiet(time
.strftime("Build end time: %H:%M:%S, %b.%d %Y", time
.localtime()))
2067 EdkLogger
.quiet("Build total time: %s\n" % BuildDurationStr
)
2070 if __name__
== '__main__':
2072 ## 0-127 is a safe return range, and 1 is a standard default error
2073 if r
< 0 or r
> 127: r
= 1