2 # build a platform or a module
4 # Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
6 # This program and the accompanying materials
7 # are licensed and made available under the terms and conditions of the BSD License
8 # which accompanies this distribution. The full text of the license may be found at
9 # http://opensource.org/licenses/bsd-license.php
11 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
18 import Common
.LongFilePathOs
as os
26 import encodings
.ascii
29 from threading
import *
30 from optparse
import OptionParser
31 from subprocess
import *
32 from Common
import Misc
as Utils
34 from Common
.LongFilePathSupport
import OpenLongFilePath
as open
35 from Common
.LongFilePathSupport
import LongFilePath
36 from Common
.TargetTxtClassObject
import *
37 from Common
.ToolDefClassObject
import *
38 from Common
.DataType
import *
39 from Common
.BuildVersion
import gBUILD_VERSION
40 from AutoGen
.AutoGen
import *
41 from Common
.BuildToolError
import *
42 from Workspace
.WorkspaceDatabase
import *
44 from BuildReport
import BuildReport
45 from GenPatchPcdTable
.GenPatchPcdTable
import *
46 from PatchPcdValue
.PatchPcdValue
import *
48 import Common
.EdkLogger
49 import Common
.GlobalData
as GlobalData
51 # Version and Copyright
52 VersionNumber
= "0.51" + ' ' + gBUILD_VERSION
53 __version__
= "%prog Version " + VersionNumber
54 __copyright__
= "Copyright (c) 2007 - 2014, Intel Corporation All rights reserved."
56 ## standard targets of build command
57 gSupportedTarget
= ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']
59 ## build configuration file
60 gBuildConfiguration
= "Conf/target.txt"
61 gBuildCacheDir
= "Conf/.cache"
62 gToolsDefinition
= "Conf/tools_def.txt"
64 TemporaryTablePattern
= re
.compile(r
'^_\d+_\d+_[a-fA-F0-9]+$')
67 ## Check environment PATH variable to make sure the specified tool is found
69 # If the tool is found in the PATH, then True is returned
70 # Otherwise, False is returned
72 def IsToolInPath(tool
):
73 if os
.environ
.has_key('PATHEXT'):
74 extns
= os
.environ
['PATHEXT'].split(os
.path
.pathsep
)
77 for pathDir
in os
.environ
['PATH'].split(os
.path
.pathsep
):
79 if os
.path
.exists(os
.path
.join(pathDir
, tool
+ ext
)):
83 ## Check environment variables
85 # Check environment variables that must be set for build. Currently they are
87 # WORKSPACE The directory all packages/platforms start from
88 # EDK_TOOLS_PATH The directory contains all tools needed by the build
89 # PATH $(EDK_TOOLS_PATH)/Bin/<sys> must be set in PATH
91 # If any of above environment variable is not set or has error, the build
94 def CheckEnvVariable():
96 if "WORKSPACE" not in os
.environ
:
97 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
98 ExtraData
="WORKSPACE")
100 WorkspaceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["WORKSPACE"]))
101 if not os
.path
.exists(WorkspaceDir
):
102 EdkLogger
.error("build", FILE_NOT_FOUND
, "WORKSPACE doesn't exist", ExtraData
="%s" % WorkspaceDir
)
103 elif ' ' in WorkspaceDir
:
104 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in WORKSPACE path",
105 ExtraData
=WorkspaceDir
)
106 os
.environ
["WORKSPACE"] = WorkspaceDir
109 # Check EFI_SOURCE (Edk build convention). EDK_SOURCE will always point to ECP
111 if "ECP_SOURCE" not in os
.environ
:
112 os
.environ
["ECP_SOURCE"] = os
.path
.join(WorkspaceDir
, GlobalData
.gEdkCompatibilityPkg
)
113 if "EFI_SOURCE" not in os
.environ
:
114 os
.environ
["EFI_SOURCE"] = os
.environ
["ECP_SOURCE"]
115 if "EDK_SOURCE" not in os
.environ
:
116 os
.environ
["EDK_SOURCE"] = os
.environ
["ECP_SOURCE"]
119 # Unify case of characters on case-insensitive systems
121 EfiSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EFI_SOURCE"]))
122 EdkSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EDK_SOURCE"]))
123 EcpSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["ECP_SOURCE"]))
125 os
.environ
["EFI_SOURCE"] = EfiSourceDir
126 os
.environ
["EDK_SOURCE"] = EdkSourceDir
127 os
.environ
["ECP_SOURCE"] = EcpSourceDir
128 os
.environ
["EDK_TOOLS_PATH"] = os
.path
.normcase(os
.environ
["EDK_TOOLS_PATH"])
130 if not os
.path
.exists(EcpSourceDir
):
131 EdkLogger
.verbose("ECP_SOURCE = %s doesn't exist. Edk modules could not be built." % EcpSourceDir
)
132 elif ' ' in EcpSourceDir
:
133 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in ECP_SOURCE path",
134 ExtraData
=EcpSourceDir
)
135 if not os
.path
.exists(EdkSourceDir
):
136 if EdkSourceDir
== EcpSourceDir
:
137 EdkLogger
.verbose("EDK_SOURCE = %s doesn't exist. Edk modules could not be built." % EdkSourceDir
)
139 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE does not exist",
140 ExtraData
=EdkSourceDir
)
141 elif ' ' in EdkSourceDir
:
142 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EDK_SOURCE path",
143 ExtraData
=EdkSourceDir
)
144 if not os
.path
.exists(EfiSourceDir
):
145 if EfiSourceDir
== EcpSourceDir
:
146 EdkLogger
.verbose("EFI_SOURCE = %s doesn't exist. Edk modules could not be built." % EfiSourceDir
)
148 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE does not exist",
149 ExtraData
=EfiSourceDir
)
150 elif ' ' in EfiSourceDir
:
151 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EFI_SOURCE path",
152 ExtraData
=EfiSourceDir
)
154 # change absolute path to relative path to WORKSPACE
155 if EfiSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
156 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE is not under WORKSPACE",
157 ExtraData
="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir
, EfiSourceDir
))
158 if EdkSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
159 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE is not under WORKSPACE",
160 ExtraData
="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir
, EdkSourceDir
))
161 if EcpSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
162 EdkLogger
.error("build", PARAMETER_INVALID
, "ECP_SOURCE is not under WORKSPACE",
163 ExtraData
="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir
, EcpSourceDir
))
165 # check EDK_TOOLS_PATH
166 if "EDK_TOOLS_PATH" not in os
.environ
:
167 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
168 ExtraData
="EDK_TOOLS_PATH")
171 if "PATH" not in os
.environ
:
172 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
175 GlobalData
.gWorkspace
= WorkspaceDir
176 GlobalData
.gEfiSource
= EfiSourceDir
177 GlobalData
.gEdkSource
= EdkSourceDir
178 GlobalData
.gEcpSource
= EcpSourceDir
180 GlobalData
.gGlobalDefines
["WORKSPACE"] = WorkspaceDir
181 GlobalData
.gGlobalDefines
["EFI_SOURCE"] = EfiSourceDir
182 GlobalData
.gGlobalDefines
["EDK_SOURCE"] = EdkSourceDir
183 GlobalData
.gGlobalDefines
["ECP_SOURCE"] = EcpSourceDir
184 GlobalData
.gGlobalDefines
["EDK_TOOLS_PATH"] = os
.environ
["EDK_TOOLS_PATH"]
186 ## Get normalized file path
188 # Convert the path to be local format, and remove the WORKSPACE path at the
189 # beginning if the file path is given in full path.
191 # @param FilePath File path to be normalized
192 # @param Workspace Workspace path which the FilePath will be checked against
194 # @retval string The normalized file path
196 def NormFile(FilePath
, Workspace
):
197 # check if the path is absolute or relative
198 if os
.path
.isabs(FilePath
):
199 FileFullPath
= os
.path
.normpath(FilePath
)
201 FileFullPath
= os
.path
.normpath(os
.path
.join(Workspace
, FilePath
))
203 # check if the file path exists or not
204 if not os
.path
.isfile(FileFullPath
):
205 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath
)
207 # remove workspace directory from the beginning part of the file path
208 if Workspace
[-1] in ["\\", "/"]:
209 return FileFullPath
[len(Workspace
):]
211 return FileFullPath
[(len(Workspace
) + 1):]
213 ## Get the output of an external program
215 # This is the entrance method of thread reading output of an external program and
216 # putting them in STDOUT/STDERR of current program.
218 # @param From The stream message read from
219 # @param To The stream message put on
220 # @param ExitFlag The flag used to indicate stopping reading
222 def ReadMessage(From
, To
, ExitFlag
):
224 # read one line a time
225 Line
= From
.readline()
226 # empty string means "end"
227 if Line
!= None and Line
!= "":
234 ## Launch an external program
236 # This method will call subprocess.Popen to execute an external program with
237 # given options in specified directory. Because of the dead-lock issue during
238 # redirecting output of the external program, threads are used to to do the
241 # @param Command A list or string containing the call of the program
242 # @param WorkingDir The directory in which the program will be running
244 def LaunchCommand(Command
, WorkingDir
):
245 # if working directory doesn't exist, Popen() will raise an exception
246 if not os
.path
.isdir(WorkingDir
):
247 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=WorkingDir
)
250 EndOfProcedure
= None
253 Proc
= Popen(Command
, stdout
=PIPE
, stderr
=PIPE
, env
=os
.environ
, cwd
=WorkingDir
, bufsize
=-1)
255 # launch two threads to read the STDOUT and STDERR
256 EndOfProcedure
= Event()
257 EndOfProcedure
.clear()
259 StdOutThread
= Thread(target
=ReadMessage
, args
=(Proc
.stdout
, EdkLogger
.info
, EndOfProcedure
))
260 StdOutThread
.setName("STDOUT-Redirector")
261 StdOutThread
.setDaemon(False)
265 StdErrThread
= Thread(target
=ReadMessage
, args
=(Proc
.stderr
, EdkLogger
.quiet
, EndOfProcedure
))
266 StdErrThread
.setName("STDERR-Redirector")
267 StdErrThread
.setDaemon(False)
270 # waiting for program exit
272 except: # in case of aborting
273 # terminate the threads redirecting the program output
274 if EndOfProcedure
!= None:
277 if type(Command
) != type(""):
278 Command
= " ".join(Command
)
279 EdkLogger
.error("build", COMMAND_FAILURE
, "Failed to start command", ExtraData
="%s [%s]" % (Command
, WorkingDir
))
286 # check the return code of the program
287 if Proc
.returncode
!= 0:
288 if type(Command
) != type(""):
289 Command
= " ".join(Command
)
290 EdkLogger
.error("build", COMMAND_FAILURE
, ExtraData
="%s [%s]" % (Command
, WorkingDir
))
292 ## The smallest unit that can be built in multi-thread build mode
294 # This is the base class of build unit. The "Obj" parameter must provide
295 # __str__(), __eq__() and __hash__() methods. Otherwise there could be build units
298 # Currently the "Obj" should be only ModuleAutoGen or PlatformAutoGen objects.
303 # @param self The object pointer
304 # @param Obj The object the build is working on
305 # @param Target The build target name, one of gSupportedTarget
306 # @param Dependency The BuildUnit(s) which must be completed in advance
307 # @param WorkingDir The directory build command starts in
309 def __init__(self
, Obj
, BuildCommand
, Target
, Dependency
, WorkingDir
="."):
310 self
.BuildObject
= Obj
311 self
.Dependency
= Dependency
312 self
.WorkingDir
= WorkingDir
314 self
.BuildCommand
= BuildCommand
316 EdkLogger
.error("build", OPTION_MISSING
,
317 "No build command found for this module. "
318 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
319 (Obj
.BuildTarget
, Obj
.ToolChain
, Obj
.Arch
),
325 # It just returns the string representation of self.BuildObject
327 # @param self The object pointer
330 return str(self
.BuildObject
)
332 ## "==" operator method
334 # It just compares self.BuildObject with "Other". So self.BuildObject must
335 # provide its own __eq__() method.
337 # @param self The object pointer
338 # @param Other The other BuildUnit object compared to
340 def __eq__(self
, Other
):
341 return Other
!= None and self
.BuildObject
== Other
.BuildObject \
342 and self
.BuildObject
.Arch
== Other
.BuildObject
.Arch
346 # It just returns the hash value of self.BuildObject which must be hashable.
348 # @param self The object pointer
351 return hash(self
.BuildObject
) + hash(self
.BuildObject
.Arch
)
354 return repr(self
.BuildObject
)
356 ## The smallest module unit that can be built by nmake/make command in multi-thread build mode
358 # This class is for module build by nmake/make build system. The "Obj" parameter
359 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
360 # be make units missing build.
362 # Currently the "Obj" should be only ModuleAutoGen object.
364 class ModuleMakeUnit(BuildUnit
):
367 # @param self The object pointer
368 # @param Obj The ModuleAutoGen object the build is working on
369 # @param Target The build target name, one of gSupportedTarget
371 def __init__(self
, Obj
, Target
):
372 Dependency
= [ModuleMakeUnit(La
, Target
) for La
in Obj
.LibraryAutoGenList
]
373 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
374 if Target
in [None, "", "all"]:
375 self
.Target
= "tbuild"
377 ## The smallest platform unit that can be built by nmake/make command in multi-thread build mode
379 # This class is for platform build by nmake/make build system. The "Obj" parameter
380 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
381 # be make units missing build.
383 # Currently the "Obj" should be only PlatformAutoGen object.
385 class PlatformMakeUnit(BuildUnit
):
388 # @param self The object pointer
389 # @param Obj The PlatformAutoGen object the build is working on
390 # @param Target The build target name, one of gSupportedTarget
392 def __init__(self
, Obj
, Target
):
393 Dependency
= [ModuleMakeUnit(Lib
, Target
) for Lib
in self
.BuildObject
.LibraryAutoGenList
]
394 Dependency
.extend([ModuleMakeUnit(Mod
, Target
) for Mod
in self
.BuildObject
.ModuleAutoGenList
])
395 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
397 ## The class representing the task of a module build or platform build
399 # This class manages the build tasks in multi-thread build mode. Its jobs include
400 # scheduling thread running, catching thread error, monitor the thread status, etc.
403 # queue for tasks waiting for schedule
404 _PendingQueue
= sdict()
405 _PendingQueueLock
= threading
.Lock()
407 # queue for tasks ready for running
408 _ReadyQueue
= sdict()
409 _ReadyQueueLock
= threading
.Lock()
411 # queue for run tasks
412 _RunningQueue
= sdict()
413 _RunningQueueLock
= threading
.Lock()
415 # queue containing all build tasks, in case duplicate build
418 # flag indicating error occurs in a running thread
419 _ErrorFlag
= threading
.Event()
423 # BoundedSemaphore object used to control the number of running threads
426 # flag indicating if the scheduler is started or not
427 _SchedulerStopped
= threading
.Event()
428 _SchedulerStopped
.set()
430 ## Start the task scheduler thread
432 # @param MaxThreadNumber The maximum thread number
433 # @param ExitFlag Flag used to end the scheduler
436 def StartScheduler(MaxThreadNumber
, ExitFlag
):
437 SchedulerThread
= Thread(target
=BuildTask
.Scheduler
, args
=(MaxThreadNumber
, ExitFlag
))
438 SchedulerThread
.setName("Build-Task-Scheduler")
439 SchedulerThread
.setDaemon(False)
440 SchedulerThread
.start()
441 # wait for the scheduler to be started, especially useful in Linux
442 while not BuildTask
.IsOnGoing():
447 # @param MaxThreadNumber The maximum thread number
448 # @param ExitFlag Flag used to end the scheduler
451 def Scheduler(MaxThreadNumber
, ExitFlag
):
452 BuildTask
._SchedulerStopped
.clear()
454 # use BoundedSemaphore to control the maximum running threads
455 BuildTask
._Thread
= BoundedSemaphore(MaxThreadNumber
)
457 # scheduling loop, which will exits when no pending/ready task and
458 # indicated to do so, or there's error in running thread
460 while (len(BuildTask
._PendingQueue
) > 0 or len(BuildTask
._ReadyQueue
) > 0 \
461 or not ExitFlag
.isSet()) and not BuildTask
._ErrorFlag
.isSet():
462 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Pending Queue (%d), Ready Queue (%d)"
463 % (len(BuildTask
._PendingQueue
), len(BuildTask
._ReadyQueue
)))
465 # get all pending tasks
466 BuildTask
._PendingQueueLock
.acquire()
467 BuildObjectList
= BuildTask
._PendingQueue
.keys()
469 # check if their dependency is resolved, and if true, move them
472 for BuildObject
in BuildObjectList
:
473 Bt
= BuildTask
._PendingQueue
[BuildObject
]
475 BuildTask
._ReadyQueue
[BuildObject
] = BuildTask
._PendingQueue
.pop(BuildObject
)
476 BuildTask
._PendingQueueLock
.release()
478 # launch build thread until the maximum number of threads is reached
479 while not BuildTask
._ErrorFlag
.isSet():
480 # empty ready queue, do nothing further
481 if len(BuildTask
._ReadyQueue
) == 0:
484 # wait for active thread(s) exit
485 BuildTask
._Thread
.acquire(True)
487 # start a new build thread
488 Bo
= BuildTask
._ReadyQueue
.keys()[0]
489 Bt
= BuildTask
._ReadyQueue
.pop(Bo
)
491 # move into running queue
492 BuildTask
._RunningQueueLock
.acquire()
493 BuildTask
._RunningQueue
[Bo
] = Bt
494 BuildTask
._RunningQueueLock
.release()
503 # wait for all running threads exit
504 if BuildTask
._ErrorFlag
.isSet():
505 EdkLogger
.quiet("\nWaiting for all build threads exit...")
506 # while not BuildTask._ErrorFlag.isSet() and \
507 while len(BuildTask
._RunningQueue
) > 0:
508 EdkLogger
.verbose("Waiting for thread ending...(%d)" % len(BuildTask
._RunningQueue
))
509 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Threads [%s]" % ", ".join([Th
.getName() for Th
in threading
.enumerate()]))
512 except BaseException
, X
:
514 # TRICK: hide the output of threads left runing, so that the user can
515 # catch the error message easily
517 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
518 BuildTask
._ErrorFlag
.set()
519 BuildTask
._ErrorMessage
= "build thread scheduler error\n\t%s" % str(X
)
521 BuildTask
._PendingQueue
.clear()
522 BuildTask
._ReadyQueue
.clear()
523 BuildTask
._RunningQueue
.clear()
524 BuildTask
._TaskQueue
.clear()
525 BuildTask
._SchedulerStopped
.set()
527 ## Wait for all running method exit
530 def WaitForComplete():
531 BuildTask
._SchedulerStopped
.wait()
533 ## Check if the scheduler is running or not
537 return not BuildTask
._SchedulerStopped
.isSet()
542 if BuildTask
.IsOnGoing():
543 BuildTask
._ErrorFlag
.set()
544 BuildTask
.WaitForComplete()
546 ## Check if there's error in running thread
548 # Since the main thread cannot catch exceptions in other thread, we have to
549 # use threading.Event to communicate this formation to main thread.
553 return BuildTask
._ErrorFlag
.isSet()
555 ## Get error message in running thread
557 # Since the main thread cannot catch exceptions in other thread, we have to
558 # use a static variable to communicate this message to main thread.
561 def GetErrorMessage():
562 return BuildTask
._ErrorMessage
564 ## Factory method to create a BuildTask object
566 # This method will check if a module is building or has been built. And if
567 # true, just return the associated BuildTask object in the _TaskQueue. If
568 # not, create and return a new BuildTask object. The new BuildTask object
569 # will be appended to the _PendingQueue for scheduling later.
571 # @param BuildItem A BuildUnit object representing a build object
572 # @param Dependency The dependent build object of BuildItem
575 def New(BuildItem
, Dependency
=None):
576 if BuildItem
in BuildTask
._TaskQueue
:
577 Bt
= BuildTask
._TaskQueue
[BuildItem
]
581 Bt
._Init
(BuildItem
, Dependency
)
582 BuildTask
._TaskQueue
[BuildItem
] = Bt
584 BuildTask
._PendingQueueLock
.acquire()
585 BuildTask
._PendingQueue
[BuildItem
] = Bt
586 BuildTask
._PendingQueueLock
.release()
590 ## The real constructor of BuildTask
592 # @param BuildItem A BuildUnit object representing a build object
593 # @param Dependency The dependent build object of BuildItem
595 def _Init(self
, BuildItem
, Dependency
=None):
596 self
.BuildItem
= BuildItem
598 self
.DependencyList
= []
599 if Dependency
== None:
600 Dependency
= BuildItem
.Dependency
602 Dependency
.extend(BuildItem
.Dependency
)
603 self
.AddDependency(Dependency
)
604 # flag indicating build completes, used to avoid unnecessary re-build
605 self
.CompleteFlag
= False
607 ## Check if all dependent build tasks are completed or not
611 for Dep
in self
.DependencyList
:
612 if Dep
.CompleteFlag
== True:
619 ## Add dependent build task
621 # @param Dependency The list of dependent build objects
623 def AddDependency(self
, Dependency
):
624 for Dep
in Dependency
:
625 self
.DependencyList
.append(BuildTask
.New(Dep
)) # BuildTask list
627 ## The thread wrapper of LaunchCommand function
629 # @param Command A list or string contains the call of the command
630 # @param WorkingDir The directory in which the program will be running
632 def _CommandThread(self
, Command
, WorkingDir
):
634 LaunchCommand(Command
, WorkingDir
)
635 self
.CompleteFlag
= True
638 # TRICK: hide the output of threads left runing, so that the user can
639 # catch the error message easily
641 if not BuildTask
._ErrorFlag
.isSet():
642 GlobalData
.gBuildingModule
= "%s [%s, %s, %s]" % (str(self
.BuildItem
.BuildObject
),
643 self
.BuildItem
.BuildObject
.Arch
,
644 self
.BuildItem
.BuildObject
.ToolChain
,
645 self
.BuildItem
.BuildObject
.BuildTarget
647 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
648 BuildTask
._ErrorFlag
.set()
649 BuildTask
._ErrorMessage
= "%s broken\n %s [%s]" % \
650 (threading
.currentThread().getName(), Command
, WorkingDir
)
651 # indicate there's a thread is available for another build task
652 BuildTask
._RunningQueueLock
.acquire()
653 BuildTask
._RunningQueue
.pop(self
.BuildItem
)
654 BuildTask
._RunningQueueLock
.release()
655 BuildTask
._Thread
.release()
657 ## Start build task thread
660 EdkLogger
.quiet("Building ... %s" % repr(self
.BuildItem
))
661 Command
= self
.BuildItem
.BuildCommand
+ [self
.BuildItem
.Target
]
662 self
.BuildTread
= Thread(target
=self
._CommandThread
, args
=(Command
, self
.BuildItem
.WorkingDir
))
663 self
.BuildTread
.setName("build thread")
664 self
.BuildTread
.setDaemon(False)
665 self
.BuildTread
.start()
667 ## The class contains the information related to EFI image
672 # Constructor will load all required image information.
674 # @param BaseName The full file path of image.
675 # @param Guid The GUID for image.
676 # @param Arch Arch of this image.
677 # @param OutputDir The output directory for image.
678 # @param DebugDir The debug directory for image.
679 # @param ImageClass PeImage Information
681 def __init__(self
, BaseName
, Guid
, Arch
, OutputDir
, DebugDir
, ImageClass
):
682 self
.BaseName
= BaseName
685 self
.OutputDir
= OutputDir
686 self
.DebugDir
= DebugDir
687 self
.Image
= ImageClass
688 self
.Image
.Size
= (self
.Image
.Size
/ 0x1000 + 1) * 0x1000
690 ## The class implementing the EDK2 build process
692 # The build process includes:
693 # 1. Load configuration from target.txt and tools_def.txt in $(WORKSPACE)/Conf
694 # 2. Parse DSC file of active platform
695 # 3. Parse FDF file if any
696 # 4. Establish build database, including parse all other files (module, package)
697 # 5. Create AutoGen files (C code file, depex file, makefile) if necessary
698 # 6. Call build command
703 # Constructor will load all necessary configurations, parse platform, modules
704 # and packages and the establish a database for AutoGen.
706 # @param Target The build command target, one of gSupportedTarget
707 # @param WorkspaceDir The directory of workspace
708 # @param BuildOptions Build options passed from command line
710 def __init__(self
, Target
, WorkspaceDir
, BuildOptions
):
711 self
.WorkspaceDir
= WorkspaceDir
713 self
.PlatformFile
= BuildOptions
.PlatformFile
714 self
.ModuleFile
= BuildOptions
.ModuleFile
715 self
.ArchList
= BuildOptions
.TargetArch
716 self
.ToolChainList
= BuildOptions
.ToolChain
717 self
.BuildTargetList
= BuildOptions
.BuildTarget
718 self
.Fdf
= BuildOptions
.FdfFile
719 self
.FdList
= BuildOptions
.RomImage
720 self
.FvList
= BuildOptions
.FvImage
721 self
.CapList
= BuildOptions
.CapName
722 self
.SilentMode
= BuildOptions
.SilentMode
723 self
.ThreadNumber
= BuildOptions
.ThreadNumber
724 self
.SkipAutoGen
= BuildOptions
.SkipAutoGen
725 self
.Reparse
= BuildOptions
.Reparse
726 self
.SkuId
= BuildOptions
.SkuId
727 self
.SpawnMode
= True
728 self
.BuildReport
= BuildReport(BuildOptions
.ReportFile
, BuildOptions
.ReportType
)
729 self
.TargetTxt
= TargetTxtClassObject()
730 self
.ToolDef
= ToolDefClassObject()
731 if BuildOptions
.DisableCache
:
732 self
.Db
= WorkspaceDatabase(":memory:")
734 self
.Db
= WorkspaceDatabase(None, self
.Reparse
)
735 self
.BuildDatabase
= self
.Db
.BuildObject
737 self
.LoadFixAddress
= 0
738 self
.UniFlag
= BuildOptions
.Flag
740 # print dot character during doing some time-consuming work
741 self
.Progress
= Utils
.Progressor()
745 # print current build environment and configuration
746 EdkLogger
.quiet("%-16s = %s" % ("WORKSPACE", os
.environ
["WORKSPACE"]))
747 EdkLogger
.quiet("%-16s = %s" % ("ECP_SOURCE", os
.environ
["ECP_SOURCE"]))
748 EdkLogger
.quiet("%-16s = %s" % ("EDK_SOURCE", os
.environ
["EDK_SOURCE"]))
749 EdkLogger
.quiet("%-16s = %s" % ("EFI_SOURCE", os
.environ
["EFI_SOURCE"]))
750 EdkLogger
.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os
.environ
["EDK_TOOLS_PATH"]))
754 os
.chdir(self
.WorkspaceDir
)
756 ## Load configuration
758 # This method will parse target.txt and get the build configurations.
760 def LoadConfiguration(self
):
762 # Check target.txt and tools_def.txt and Init them
764 BuildConfigurationFile
= os
.path
.normpath(os
.path
.join(self
.WorkspaceDir
, gBuildConfiguration
))
765 if os
.path
.isfile(BuildConfigurationFile
) == True:
766 StatusCode
= self
.TargetTxt
.LoadTargetTxtFile(BuildConfigurationFile
)
768 ToolDefinitionFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_CONF
]
769 if ToolDefinitionFile
== '':
770 ToolDefinitionFile
= gToolsDefinition
771 ToolDefinitionFile
= os
.path
.normpath(os
.path
.join(self
.WorkspaceDir
, ToolDefinitionFile
))
772 if os
.path
.isfile(ToolDefinitionFile
) == True:
773 StatusCode
= self
.ToolDef
.LoadToolDefFile(ToolDefinitionFile
)
775 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=ToolDefinitionFile
)
777 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=BuildConfigurationFile
)
779 # if no ARCH given in command line, get it from target.txt
780 if not self
.ArchList
:
781 self
.ArchList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET_ARCH
]
782 self
.ArchList
= tuple(self
.ArchList
)
784 # if no build target given in command line, get it from target.txt
785 if not self
.BuildTargetList
:
786 self
.BuildTargetList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET
]
788 # if no tool chain given in command line, get it from target.txt
789 if not self
.ToolChainList
:
790 self
.ToolChainList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_TAG
]
791 if self
.ToolChainList
== None or len(self
.ToolChainList
) == 0:
792 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
, ExtraData
="No toolchain given. Don't know how to build.\n")
794 # check if the tool chains are defined or not
795 NewToolChainList
= []
796 for ToolChain
in self
.ToolChainList
:
797 if ToolChain
not in self
.ToolDef
.ToolsDefTxtDatabase
[TAB_TOD_DEFINES_TOOL_CHAIN_TAG
]:
798 EdkLogger
.warn("build", "Tool chain [%s] is not defined" % ToolChain
)
800 NewToolChainList
.append(ToolChain
)
801 # if no tool chain available, break the build
802 if len(NewToolChainList
) == 0:
803 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
804 ExtraData
="[%s] not defined. No toolchain available for build!\n" % ", ".join(self
.ToolChainList
))
806 self
.ToolChainList
= NewToolChainList
808 if self
.ThreadNumber
== None:
809 self
.ThreadNumber
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER
]
810 if self
.ThreadNumber
== '':
811 self
.ThreadNumber
= 0
813 self
.ThreadNumber
= int(self
.ThreadNumber
, 0)
815 if self
.ThreadNumber
== 0:
816 self
.ThreadNumber
= 1
818 if not self
.PlatformFile
:
819 PlatformFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_ACTIVE_PLATFORM
]
821 # Try to find one in current directory
822 WorkingDirectory
= os
.getcwd()
823 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.dsc')))
824 FileNum
= len(FileList
)
826 EdkLogger
.error("build", OPTION_MISSING
,
827 ExtraData
="There are %d DSC files in %s. Use '-p' to specify one.\n" % (FileNum
, WorkingDirectory
))
829 PlatformFile
= FileList
[0]
831 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
832 ExtraData
="No active platform specified in target.txt or command line! Nothing can be built.\n")
834 self
.PlatformFile
= PathClass(NormFile(PlatformFile
, self
.WorkspaceDir
), self
.WorkspaceDir
)
836 ## Initialize build configuration
838 # This method will parse DSC file and merge the configurations from
839 # command line and target.txt, then get the final build configurations.
842 # parse target.txt, tools_def.txt, and platform file
843 self
.LoadConfiguration()
845 # Allow case-insensitive for those from command line or configuration file
846 ErrorCode
, ErrorInfo
= self
.PlatformFile
.Validate(".dsc", False)
848 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
850 # create metafile database
851 self
.Db
.InitDatabase()
853 ## Build a module or platform
855 # Create autogen code and makefile for a module or platform, and the launch
856 # "make" command to build it
858 # @param Target The target of build command
859 # @param Platform The platform file
860 # @param Module The module file
861 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
862 # @param ToolChain The name of toolchain to build
863 # @param Arch The arch of the module/platform
864 # @param CreateDepModuleCodeFile Flag used to indicate creating code
865 # for dependent modules/Libraries
866 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
867 # for dependent modules/Libraries
869 def _Build(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True):
870 if AutoGenObject
== None:
873 # skip file generation for cleanxxx targets, run and fds target
874 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
875 # for target which must generate AutoGen code and makefile
876 if not self
.SkipAutoGen
or Target
== 'genc':
877 self
.Progress
.Start("Generating code")
878 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
879 self
.Progress
.Stop("done!")
883 if not self
.SkipAutoGen
or Target
== 'genmake':
884 self
.Progress
.Start("Generating makefile")
885 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
886 AutoGenObject
.CreateAsBuiltInf()
887 self
.Progress
.Stop("done!")
888 if Target
== "genmake":
891 # always recreate top/platform makefile when clean, just in case of inconsistency
892 AutoGenObject
.CreateCodeFile(False)
893 AutoGenObject
.CreateMakeFile(False)
895 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
896 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
898 BuildCommand
= AutoGenObject
.BuildCommand
899 if BuildCommand
== None or len(BuildCommand
) == 0:
900 EdkLogger
.error("build", OPTION_MISSING
,
901 "No build command found for this module. "
902 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
903 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
904 ExtraData
=str(AutoGenObject
))
906 BuildCommand
= BuildCommand
+ [Target
]
907 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
908 if Target
== 'cleanall':
910 #os.rmdir(AutoGenObject.BuildDir)
911 RemoveDirectory(AutoGenObject
.BuildDir
, True)
913 # First should close DB.
916 RemoveDirectory(gBuildCacheDir
, True)
917 except WindowsError, X
:
918 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
921 ## Rebase module image and Get function address for the input module list.
923 def _RebaseModule (self
, MapBuffer
, BaseAddress
, ModuleList
, AddrIsOffset
= True, ModeIsSmm
= False):
926 InfFileNameList
= ModuleList
.keys()
927 #InfFileNameList.sort()
928 for InfFile
in InfFileNameList
:
929 sys
.stdout
.write (".")
931 ModuleInfo
= ModuleList
[InfFile
]
932 ModuleName
= ModuleInfo
.BaseName
933 ModuleOutputImage
= ModuleInfo
.Image
.FileName
934 ModuleDebugImage
= os
.path
.join(ModuleInfo
.DebugDir
, ModuleInfo
.BaseName
+ '.efi')
935 ## for SMM module in SMRAM, the SMRAM will be allocated from base to top.
937 BaseAddress
= BaseAddress
- ModuleInfo
.Image
.Size
939 # Update Image to new BaseAddress by GenFw tool
941 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
942 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
945 # Set new address to the section header only for SMM driver.
947 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
948 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
950 # Collect funtion address from Map file
952 ImageMapTable
= ModuleOutputImage
.replace('.efi', '.map')
954 if os
.path
.exists(ImageMapTable
):
955 OrigImageBaseAddress
= 0
956 ImageMap
= open (ImageMapTable
, 'r')
957 for LinStr
in ImageMap
:
958 if len (LinStr
.strip()) == 0:
961 # Get the preferred address set on link time.
963 if LinStr
.find ('Preferred load address is') != -1:
964 StrList
= LinStr
.split()
965 OrigImageBaseAddress
= int (StrList
[len(StrList
) - 1], 16)
967 StrList
= LinStr
.split()
968 if len (StrList
) > 4:
969 if StrList
[3] == 'f' or StrList
[3] =='F':
971 RelativeAddress
= int (StrList
[2], 16) - OrigImageBaseAddress
972 FunctionList
.append ((Name
, RelativeAddress
))
973 if ModuleInfo
.Arch
== 'IPF' and Name
.endswith('_ModuleEntryPoint'):
975 # Get the real entry point address for IPF image.
977 ModuleInfo
.Image
.EntryPoint
= RelativeAddress
980 # Add general information.
983 MapBuffer
.write('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
985 MapBuffer
.write('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName
, 0 - BaseAddress
, 0 - (BaseAddress
+ ModuleInfo
.Image
.EntryPoint
)))
987 MapBuffer
.write('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
989 # Add guid and general seciton section.
991 TextSectionAddress
= 0
992 DataSectionAddress
= 0
993 for SectionHeader
in ModuleInfo
.Image
.SectionHeaderList
:
994 if SectionHeader
[0] == '.text':
995 TextSectionAddress
= SectionHeader
[1]
996 elif SectionHeader
[0] in ['.data', '.sdata']:
997 DataSectionAddress
= SectionHeader
[1]
999 MapBuffer
.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo
.Guid
, 0 - (BaseAddress
+ TextSectionAddress
), 0 - (BaseAddress
+ DataSectionAddress
)))
1001 MapBuffer
.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo
.Guid
, BaseAddress
+ TextSectionAddress
, BaseAddress
+ DataSectionAddress
))
1003 # Add debug image full path.
1005 MapBuffer
.write('(IMAGE=%s)\n\n' % (ModuleDebugImage
))
1007 # Add funtion address
1009 for Function
in FunctionList
:
1011 MapBuffer
.write(' -0x%010X %s\n' % (0 - (BaseAddress
+ Function
[1]), Function
[0]))
1013 MapBuffer
.write(' 0x%010X %s\n' % (BaseAddress
+ Function
[1], Function
[0]))
1017 # for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1020 BaseAddress
= BaseAddress
+ ModuleInfo
.Image
.Size
1022 ## Collect MAP information of all FVs
1024 def _CollectFvMapBuffer (self
, MapBuffer
, Wa
, ModuleList
):
1026 # First get the XIP base address for FV map file.
1027 GuidPattern
= re
.compile("[-a-fA-F0-9]+")
1028 GuidName
= re
.compile("\(GUID=[-a-fA-F0-9]+")
1029 for FvName
in Wa
.FdfProfile
.FvDict
.keys():
1030 FvMapBuffer
= os
.path
.join(Wa
.FvDir
, FvName
+ '.Fv.map')
1031 if not os
.path
.exists(FvMapBuffer
):
1033 FvMap
= open(FvMapBuffer
, 'r')
1034 #skip FV size information
1040 MatchGuid
= GuidPattern
.match(Line
)
1041 if MatchGuid
!= None:
1043 # Replace GUID with module name
1045 GuidString
= MatchGuid
.group()
1046 if GuidString
.upper() in ModuleList
:
1047 Line
= Line
.replace(GuidString
, ModuleList
[GuidString
.upper()].Name
)
1048 MapBuffer
.write('%s' % (Line
))
1050 # Add the debug image full path.
1052 MatchGuid
= GuidName
.match(Line
)
1053 if MatchGuid
!= None:
1054 GuidString
= MatchGuid
.group().split("=")[1]
1055 if GuidString
.upper() in ModuleList
:
1056 MapBuffer
.write('(IMAGE=%s)\n' % (os
.path
.join(ModuleList
[GuidString
.upper()].DebugDir
, ModuleList
[GuidString
.upper()].Name
+ '.efi')))
1060 ## Collect MAP information of all modules
1062 def _CollectModuleMapBuffer (self
, MapBuffer
, ModuleList
):
1063 sys
.stdout
.write ("Generate Load Module At Fix Address Map")
1065 PatchEfiImageList
= []
1073 # reserve 4K size in SMRAM to make SMM module address not from 0.
1075 IsIpfPlatform
= False
1076 if 'IPF' in self
.ArchList
:
1077 IsIpfPlatform
= True
1078 for ModuleGuid
in ModuleList
:
1079 Module
= ModuleList
[ModuleGuid
]
1080 GlobalData
.gProcessingFile
= "%s [%s, %s, %s]" % (Module
.MetaFile
, Module
.Arch
, Module
.ToolChain
, Module
.BuildTarget
)
1082 OutputImageFile
= ''
1083 for ResultFile
in Module
.CodaTargetList
:
1084 if str(ResultFile
.Target
).endswith('.efi'):
1086 # module list for PEI, DXE, RUNTIME and SMM
1088 OutputImageFile
= os
.path
.join(Module
.OutputDir
, Module
.Name
+ '.efi')
1089 ImageClass
= PeImageClass (OutputImageFile
)
1090 if not ImageClass
.IsValid
:
1091 EdkLogger
.error("build", FILE_PARSE_FAILURE
, ExtraData
=ImageClass
.ErrorInfo
)
1092 ImageInfo
= PeImageInfo(Module
.Name
, Module
.Guid
, Module
.Arch
, Module
.OutputDir
, Module
.DebugDir
, ImageClass
)
1093 if Module
.ModuleType
in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER','PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:
1094 PeiModuleList
[Module
.MetaFile
] = ImageInfo
1095 PeiSize
+= ImageInfo
.Image
.Size
1096 elif Module
.ModuleType
in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:
1097 BtModuleList
[Module
.MetaFile
] = ImageInfo
1098 BtSize
+= ImageInfo
.Image
.Size
1099 elif Module
.ModuleType
in ['DXE_RUNTIME_DRIVER', 'RT_DRIVER', 'DXE_SAL_DRIVER', 'SAL_RT_DRIVER']:
1100 RtModuleList
[Module
.MetaFile
] = ImageInfo
1101 #IPF runtime driver needs to be at 2 page alignment.
1102 if IsIpfPlatform
and ImageInfo
.Image
.Size
% 0x2000 != 0:
1103 ImageInfo
.Image
.Size
= (ImageInfo
.Image
.Size
/ 0x2000 + 1) * 0x2000
1104 RtSize
+= ImageInfo
.Image
.Size
1105 elif Module
.ModuleType
in ['SMM_CORE', 'DXE_SMM_DRIVER']:
1106 SmmModuleList
[Module
.MetaFile
] = ImageInfo
1107 SmmSize
+= ImageInfo
.Image
.Size
1108 if Module
.ModuleType
== 'DXE_SMM_DRIVER':
1109 PiSpecVersion
= '0x00000000'
1110 if 'PI_SPECIFICATION_VERSION' in Module
.Module
.Specification
:
1111 PiSpecVersion
= Module
.Module
.Specification
['PI_SPECIFICATION_VERSION']
1112 # for PI specification < PI1.1, DXE_SMM_DRIVER also runs as BOOT time driver.
1113 if int(PiSpecVersion
, 16) < 0x0001000A:
1114 BtModuleList
[Module
.MetaFile
] = ImageInfo
1115 BtSize
+= ImageInfo
.Image
.Size
1118 # EFI image is final target.
1119 # Check EFI image contains patchable FixAddress related PCDs.
1121 if OutputImageFile
!= '':
1122 ModuleIsPatch
= False
1123 for Pcd
in Module
.ModulePcdList
:
1124 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1125 ModuleIsPatch
= True
1127 if not ModuleIsPatch
:
1128 for Pcd
in Module
.LibraryPcdList
:
1129 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1130 ModuleIsPatch
= True
1133 if not ModuleIsPatch
:
1136 # Module includes the patchable load fix address PCDs.
1137 # It will be fixed up later.
1139 PatchEfiImageList
.append (OutputImageFile
)
1142 # Get Top Memory address
1144 ReservedRuntimeMemorySize
= 0
1145 TopMemoryAddress
= 0
1146 if self
.LoadFixAddress
== 0xFFFFFFFFFFFFFFFF:
1147 TopMemoryAddress
= 0
1149 TopMemoryAddress
= self
.LoadFixAddress
1150 if TopMemoryAddress
< RtSize
+ BtSize
+ PeiSize
:
1151 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS is too low to load driver")
1152 # Make IPF runtime driver at 2 page alignment.
1154 ReservedRuntimeMemorySize
= TopMemoryAddress
% 0x2000
1155 RtSize
= RtSize
+ ReservedRuntimeMemorySize
1158 # Patch FixAddress related PCDs into EFI image
1160 for EfiImage
in PatchEfiImageList
:
1161 EfiImageMap
= EfiImage
.replace('.efi', '.map')
1162 if not os
.path
.exists(EfiImageMap
):
1165 # Get PCD offset in EFI image by GenPatchPcdTable function
1167 PcdTable
= parsePcdInfoFromMapFile(EfiImageMap
, EfiImage
)
1169 # Patch real PCD value by PatchPcdValue tool
1171 for PcdInfo
in PcdTable
:
1173 if PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE
:
1174 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE
, str (PeiSize
/0x1000))
1175 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE
:
1176 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE
, str (BtSize
/0x1000))
1177 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE
:
1178 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE
, str (RtSize
/0x1000))
1179 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE
and len (SmmModuleList
) > 0:
1180 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE
, str (SmmSize
/0x1000))
1181 if ReturnValue
!= 0:
1182 EdkLogger
.error("build", PARAMETER_INVALID
, "Patch PCD value failed", ExtraData
=ErrorInfo
)
1184 MapBuffer
.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize
/0x1000))
1185 MapBuffer
.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize
/0x1000))
1186 MapBuffer
.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize
/0x1000))
1187 if len (SmmModuleList
) > 0:
1188 MapBuffer
.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize
/0x1000))
1190 PeiBaseAddr
= TopMemoryAddress
- RtSize
- BtSize
1191 BtBaseAddr
= TopMemoryAddress
- RtSize
1192 RtBaseAddr
= TopMemoryAddress
- ReservedRuntimeMemorySize
1194 self
._RebaseModule
(MapBuffer
, PeiBaseAddr
, PeiModuleList
, TopMemoryAddress
== 0)
1195 self
._RebaseModule
(MapBuffer
, BtBaseAddr
, BtModuleList
, TopMemoryAddress
== 0)
1196 self
._RebaseModule
(MapBuffer
, RtBaseAddr
, RtModuleList
, TopMemoryAddress
== 0)
1197 self
._RebaseModule
(MapBuffer
, 0x1000, SmmModuleList
, AddrIsOffset
= False, ModeIsSmm
= True)
1198 MapBuffer
.write('\n\n')
1199 sys
.stdout
.write ("\n")
1202 ## Save platform Map file
1204 def _SaveMapFile (self
, MapBuffer
, Wa
):
1206 # Map file path is got.
1208 MapFilePath
= os
.path
.join(Wa
.BuildDir
, Wa
.Name
+ '.map')
1210 # Save address map into MAP file.
1212 SaveFileOnChange(MapFilePath
, MapBuffer
.getvalue(), False)
1214 if self
.LoadFixAddress
!= 0:
1215 sys
.stdout
.write ("\nLoad Module At Fix Address Map file can be found at %s\n" %(MapFilePath))
1218 ## Build active platform for different build targets and different tool chains
1220 def _BuildPlatform(self
):
1221 for BuildTarget
in self
.BuildTargetList
:
1222 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1223 for ToolChain
in self
.ToolChainList
:
1224 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1225 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1226 Wa
= WorkspaceAutoGen(
1243 self
.Fdf
= Wa
.FdfFile
1244 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1245 self
.BuildReport
.AddPlatformReport(Wa
)
1246 self
.Progress
.Stop("done!")
1247 self
._Build
(self
.Target
, Wa
)
1249 # Create MAP file when Load Fix Address is enabled.
1250 if self
.Target
in ["", "all", "fds"]:
1251 for Arch
in Wa
.ArchList
:
1252 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1254 # Check whether the set fix address is above 4G for 32bit image.
1256 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1257 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platform with IA32 or ARM arch modules")
1262 for Pa
in Wa
.AutoGenObjectList
:
1263 for Ma
in Pa
.ModuleAutoGenList
:
1266 if not Ma
.IsLibrary
:
1267 ModuleList
[Ma
.Guid
.upper()] = Ma
1269 MapBuffer
= StringIO('')
1270 if self
.LoadFixAddress
!= 0:
1272 # Rebase module to the preferred memory address before GenFds
1274 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1277 # create FDS again for the updated EFI image
1279 self
._Build
("fds", Wa
)
1282 # Create MAP file for all platform FVs after GenFds.
1284 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1286 # Save MAP buffer into MAP file.
1288 self
._SaveMapFile
(MapBuffer
, Wa
)
1290 ## Build active module for different build targets, different tool chains and different archs
1292 def _BuildModule(self
):
1293 for BuildTarget
in self
.BuildTargetList
:
1294 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1295 for ToolChain
in self
.ToolChainList
:
1296 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1297 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1299 # module build needs platform build information, so get platform
1302 Wa
= WorkspaceAutoGen(
1320 self
.Fdf
= Wa
.FdfFile
1321 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1322 Wa
.CreateMakeFile(False)
1323 self
.Progress
.Stop("done!")
1325 for Arch
in Wa
.ArchList
:
1326 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1327 Ma
= ModuleAutoGen(Wa
, self
.ModuleFile
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1328 if Ma
== None: continue
1330 self
._Build
(self
.Target
, Ma
)
1332 self
.BuildReport
.AddPlatformReport(Wa
, MaList
)
1337 "Module for [%s] is not a component of active platform."\
1338 " Please make sure that the ARCH and inf file path are"\
1339 " given in the same as in [%s]" %\
1340 (', '.join(Wa
.ArchList
), self
.PlatformFile
),
1341 ExtraData
=self
.ModuleFile
1343 # Create MAP file when Load Fix Address is enabled.
1344 if self
.Target
== "fds" and self
.Fdf
:
1345 for Arch
in Wa
.ArchList
:
1347 # Check whether the set fix address is above 4G for 32bit image.
1349 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1350 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1355 for Pa
in Wa
.AutoGenObjectList
:
1356 for Ma
in Pa
.ModuleAutoGenList
:
1359 if not Ma
.IsLibrary
:
1360 ModuleList
[Ma
.Guid
.upper()] = Ma
1362 MapBuffer
= StringIO('')
1363 if self
.LoadFixAddress
!= 0:
1365 # Rebase module to the preferred memory address before GenFds
1367 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1369 # create FDS again for the updated EFI image
1371 self
._Build
("fds", Wa
)
1373 # Create MAP file for all platform FVs after GenFds.
1375 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1377 # Save MAP buffer into MAP file.
1379 self
._SaveMapFile
(MapBuffer
, Wa
)
1381 ## Build a platform in multi-thread mode
1383 def _MultiThreadBuildPlatform(self
):
1384 for BuildTarget
in self
.BuildTargetList
:
1385 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1386 for ToolChain
in self
.ToolChainList
:
1387 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1388 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1389 Wa
= WorkspaceAutoGen(
1406 self
.Fdf
= Wa
.FdfFile
1407 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1408 self
.BuildReport
.AddPlatformReport(Wa
)
1409 Wa
.CreateMakeFile(False)
1411 # multi-thread exit flag
1412 ExitFlag
= threading
.Event()
1414 for Arch
in Wa
.ArchList
:
1415 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1416 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1420 for Module
in Pa
.Platform
.Modules
:
1421 # Get ModuleAutoGen object to generate C code file and makefile
1422 Ma
= ModuleAutoGen(Wa
, Module
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1425 # Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'
1426 if self
.Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1427 # for target which must generate AutoGen code and makefile
1428 if not self
.SkipAutoGen
or self
.Target
== 'genc':
1429 Ma
.CreateCodeFile(True)
1430 if self
.Target
== "genc":
1433 if not self
.SkipAutoGen
or self
.Target
== 'genmake':
1434 Ma
.CreateMakeFile(True)
1435 Ma
.CreateAsBuiltInf()
1436 if self
.Target
== "genmake":
1439 self
.Progress
.Stop("done!")
1442 # Generate build task for the module
1443 Bt
= BuildTask
.New(ModuleMakeUnit(Ma
, self
.Target
))
1444 # Break build if any build thread has error
1445 if BuildTask
.HasError():
1446 # we need a full version of makefile for platform
1448 BuildTask
.WaitForComplete()
1449 Pa
.CreateMakeFile(False)
1450 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1451 # Start task scheduler
1452 if not BuildTask
.IsOnGoing():
1453 BuildTask
.StartScheduler(self
.ThreadNumber
, ExitFlag
)
1455 # in case there's an interruption. we need a full version of makefile for platform
1456 Pa
.CreateMakeFile(False)
1457 if BuildTask
.HasError():
1458 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1461 # Save temp tables to a TmpTableDict.
1463 for Key
in Wa
.BuildDatabase
._CACHE
_:
1464 if Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
:
1465 if TemporaryTablePattern
.match(Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
):
1466 TmpTableDict
[Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
] = Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Cur
1469 # All modules have been put in build tasks queue. Tell task scheduler
1470 # to exit if all tasks are completed
1473 BuildTask
.WaitForComplete()
1476 # Check for build error, and raise exception if one
1477 # has been signaled.
1479 if BuildTask
.HasError():
1480 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1482 # Create MAP file when Load Fix Address is enabled.
1483 if self
.Target
in ["", "all", "fds"]:
1484 for Arch
in Wa
.ArchList
:
1486 # Check whether the set fix address is above 4G for 32bit image.
1488 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1489 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1494 for Pa
in Wa
.AutoGenObjectList
:
1495 for Ma
in Pa
.ModuleAutoGenList
:
1498 if not Ma
.IsLibrary
:
1499 ModuleList
[Ma
.Guid
.upper()] = Ma
1501 # Rebase module to the preferred memory address before GenFds
1503 MapBuffer
= StringIO('')
1504 if self
.LoadFixAddress
!= 0:
1505 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1509 # Generate FD image if there's a FDF file found
1511 LaunchCommand(Wa
.BuildCommand
+ ["fds"], Wa
.MakeFileDir
)
1513 # Create MAP file for all platform FVs after GenFds.
1515 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1517 # Save MAP buffer into MAP file.
1519 self
._SaveMapFile
(MapBuffer
, Wa
)
1521 ## Generate GuidedSectionTools.txt in the FV directories.
1523 def CreateGuidedSectionToolsFile(self
):
1524 for BuildTarget
in self
.BuildTargetList
:
1525 for ToolChain
in self
.ToolChainList
:
1526 Wa
= WorkspaceAutoGen(
1543 if not os
.path
.exists(FvDir
):
1546 for Arch
in self
.ArchList
:
1547 # Build up the list of supported architectures for this build
1548 prefix
= '%s_%s_%s_' % (BuildTarget
, ToolChain
, Arch
)
1550 # Look through the tool definitions for GUIDed tools
1552 for (attrib
, value
) in self
.ToolDef
.ToolsDefTxtDictionary
.iteritems():
1553 if attrib
.upper().endswith('_GUID'):
1554 split
= attrib
.split('_')
1555 thisPrefix
= '_'.join(split
[0:3]) + '_'
1556 if thisPrefix
== prefix
:
1557 guid
= self
.ToolDef
.ToolsDefTxtDictionary
[attrib
]
1560 path
= '_'.join(split
[0:4]) + '_PATH'
1561 path
= self
.ToolDef
.ToolsDefTxtDictionary
[path
]
1562 path
= self
.GetFullPathOfTool(path
)
1563 guidAttribs
.append((guid
, toolName
, path
))
1565 # Write out GuidedSecTools.txt
1566 toolsFile
= os
.path
.join(FvDir
, 'GuidedSectionTools.txt')
1567 toolsFile
= open(toolsFile
, 'wt')
1568 for guidedSectionTool
in guidAttribs
:
1569 print >> toolsFile
, ' '.join(guidedSectionTool
)
1572 ## Returns the full path of the tool.
1574 def GetFullPathOfTool (self
, tool
):
1575 if os
.path
.exists(tool
):
1576 return os
.path
.realpath(tool
)
1578 # We need to search for the tool using the
1579 # PATH environment variable.
1580 for dirInPath
in os
.environ
['PATH'].split(os
.pathsep
):
1581 foundPath
= os
.path
.join(dirInPath
, tool
)
1582 if os
.path
.exists(foundPath
):
1583 return os
.path
.realpath(foundPath
)
1585 # If the tool was not found in the path then we just return
1589 ## Launch the module or platform build
1592 if not self
.ModuleFile
:
1593 if not self
.SpawnMode
or self
.Target
not in ["", "all"]:
1594 self
.SpawnMode
= False
1595 self
._BuildPlatform
()
1597 self
._MultiThreadBuildPlatform
()
1598 self
.CreateGuidedSectionToolsFile()
1600 self
.SpawnMode
= False
1603 ## Do some clean-up works when error occurred
1604 def Relinquish(self
):
1605 OldLogLevel
= EdkLogger
.GetLevel()
1606 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
1607 #self.DumpBuildData()
1608 Utils
.Progressor
.Abort()
1609 if self
.SpawnMode
== True:
1611 EdkLogger
.SetLevel(OldLogLevel
)
1613 def DumpBuildData(self
):
1614 CacheDirectory
= os
.path
.join(self
.WorkspaceDir
, gBuildCacheDir
)
1615 Utils
.CreateDirectory(CacheDirectory
)
1616 Utils
.DataDump(Utils
.gFileTimeStampCache
, os
.path
.join(CacheDirectory
, "gFileTimeStampCache"))
1617 Utils
.DataDump(Utils
.gDependencyDatabase
, os
.path
.join(CacheDirectory
, "gDependencyDatabase"))
1619 def RestoreBuildData(self
):
1620 FilePath
= os
.path
.join(self
.WorkspaceDir
, gBuildCacheDir
, "gFileTimeStampCache")
1621 if Utils
.gFileTimeStampCache
== {} and os
.path
.isfile(FilePath
):
1622 Utils
.gFileTimeStampCache
= Utils
.DataRestore(FilePath
)
1623 if Utils
.gFileTimeStampCache
== None:
1624 Utils
.gFileTimeStampCache
= {}
1626 FilePath
= os
.path
.join(self
.WorkspaceDir
, gBuildCacheDir
, "gDependencyDatabase")
1627 if Utils
.gDependencyDatabase
== {} and os
.path
.isfile(FilePath
):
1628 Utils
.gDependencyDatabase
= Utils
.DataRestore(FilePath
)
1629 if Utils
.gDependencyDatabase
== None:
1630 Utils
.gDependencyDatabase
= {}
1632 def ParseDefines(DefineList
=[]):
1634 if DefineList
!= None:
1635 for Define
in DefineList
:
1636 DefineTokenList
= Define
.split("=", 1)
1637 if not GlobalData
.gMacroNamePattern
.match(DefineTokenList
[0]):
1638 EdkLogger
.error('build', FORMAT_INVALID
,
1639 "The macro name must be in the pattern [A-Z][A-Z0-9_]*",
1640 ExtraData
=DefineTokenList
[0])
1642 if len(DefineTokenList
) == 1:
1643 DefineDict
[DefineTokenList
[0]] = "TRUE"
1645 DefineDict
[DefineTokenList
[0]] = DefineTokenList
[1].strip()
1649 def SingleCheckCallback(option
, opt_str
, value
, parser
):
1650 if option
not in gParamCheck
:
1651 setattr(parser
.values
, option
.dest
, value
)
1652 gParamCheck
.append(option
)
1654 parser
.error("Option %s only allows one instance in command line!" % option
)
1656 ## Parse command line options
1658 # Using standard Python module optparse to parse command line option of this tool.
1660 # @retval Opt A optparse.Values object containing the parsed options
1661 # @retval Args Target of build command
1663 def MyOptionParser():
1664 Parser
= OptionParser(description
=__copyright__
,version
=__version__
,prog
="build.exe",usage
="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")
1665 Parser
.add_option("-a", "--arch", action
="append", type="choice", choices
=['IA32','X64','IPF','EBC','ARM', 'AARCH64'], dest
="TargetArch",
1666 help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")
1667 Parser
.add_option("-p", "--platform", action
="callback", type="string", dest
="PlatformFile", callback
=SingleCheckCallback
,
1668 help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")
1669 Parser
.add_option("-m", "--module", action
="callback", type="string", dest
="ModuleFile", callback
=SingleCheckCallback
,
1670 help="Build the module specified by the INF file name argument.")
1671 Parser
.add_option("-b", "--buildtarget", type="string", dest
="BuildTarget", help="Using the TARGET to build the platform, overriding target.txt's TARGET definition.",
1673 Parser
.add_option("-t", "--tagname", action
="append", type="string", dest
="ToolChain",
1674 help="Using the Tool Chain Tagname to build the platform, overriding target.txt's TOOL_CHAIN_TAG definition.")
1675 Parser
.add_option("-x", "--sku-id", action
="callback", type="string", dest
="SkuId", callback
=SingleCheckCallback
,
1676 help="Using this name of SKU ID to build the platform, overriding SKUID_IDENTIFIER in DSC file.")
1678 Parser
.add_option("-n", action
="callback", type="int", dest
="ThreadNumber", callback
=SingleCheckCallback
,
1679 help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. Less than 2 will disable multi-thread builds.")
1681 Parser
.add_option("-f", "--fdf", action
="callback", type="string", dest
="FdfFile", callback
=SingleCheckCallback
,
1682 help="The name of the FDF file to use, which overrides the setting in the DSC file.")
1683 Parser
.add_option("-r", "--rom-image", action
="append", type="string", dest
="RomImage", default
=[],
1684 help="The name of FD to be generated. The name must be from [FD] section in FDF file.")
1685 Parser
.add_option("-i", "--fv-image", action
="append", type="string", dest
="FvImage", default
=[],
1686 help="The name of FV to be generated. The name must be from [FV] section in FDF file.")
1687 Parser
.add_option("-C", "--capsule-image", action
="append", type="string", dest
="CapName", default
=[],
1688 help="The name of Capsule to be generated. The name must be from [Capsule] section in FDF file.")
1689 Parser
.add_option("-u", "--skip-autogen", action
="store_true", dest
="SkipAutoGen", help="Skip AutoGen step.")
1690 Parser
.add_option("-e", "--re-parse", action
="store_true", dest
="Reparse", help="Re-parse all meta-data files.")
1692 Parser
.add_option("-c", "--case-insensitive", action
="store_true", dest
="CaseInsensitive", default
=False, help="Don't check case of file name.")
1694 Parser
.add_option("-w", "--warning-as-error", action
="store_true", dest
="WarningAsError", help="Treat warning in tools as error.")
1695 Parser
.add_option("-j", "--log", action
="store", dest
="LogFile", help="Put log in specified file as well as on console.")
1697 Parser
.add_option("-s", "--silent", action
="store_true", type=None, dest
="SilentMode",
1698 help="Make use of silent mode of (n)make.")
1699 Parser
.add_option("-q", "--quiet", action
="store_true", type=None, help="Disable all messages except FATAL ERRORS.")
1700 Parser
.add_option("-v", "--verbose", action
="store_true", type=None, help="Turn on verbose output with informational messages printed, "\
1701 "including library instances selected, final dependency expression, "\
1702 "and warning messages, etc.")
1703 Parser
.add_option("-d", "--debug", action
="store", type="int", help="Enable debug messages at specified level.")
1704 Parser
.add_option("-D", "--define", action
="append", type="string", dest
="Macros", help="Macro: \"Name [= Value]\".")
1706 Parser
.add_option("-y", "--report-file", action
="store", dest
="ReportFile", help="Create/overwrite the report to the specified filename.")
1707 Parser
.add_option("-Y", "--report-type", action
="append", type="choice", choices
=['PCD','LIBRARY','FLASH','DEPEX','BUILD_FLAGS','FIXED_ADDRESS', 'EXECUTION_ORDER'], dest
="ReportType", default
=[],
1708 help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, EXECUTION_ORDER]. "\
1709 "To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")
1710 Parser
.add_option("-F", "--flag", action
="store", type="string", dest
="Flag",
1711 help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\
1712 "This option can also be specified by setting *_*_*_BUILD_FLAGS in [BuildOptions] section of platform DSC. If they are both specified, this value "\
1713 "will override the setting in [BuildOptions] section of platform DSC.")
1714 Parser
.add_option("-N", "--no-cache", action
="store_true", dest
="DisableCache", default
=False, help="Disable build cache mechanism")
1716 (Opt
, Args
)=Parser
.parse_args()
1719 ## Tool entrance method
1721 # This method mainly dispatch specific methods per the command line options.
1722 # If no error found, return zero value so the caller of this tool can know
1723 # if it's executed successfully or not.
1725 # @retval 0 Tool was successful
1726 # @retval 1 Tool failed
1729 StartTime
= time
.time()
1731 # Initialize log system
1732 EdkLogger
.Initialize()
1735 # Parse the options and args
1737 (Option
, Target
) = MyOptionParser()
1738 GlobalData
.gOptions
= Option
1739 GlobalData
.gCaseInsensitive
= Option
.CaseInsensitive
1742 if Option
.verbose
!= None:
1743 EdkLogger
.SetLevel(EdkLogger
.VERBOSE
)
1744 elif Option
.quiet
!= None:
1745 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
1746 elif Option
.debug
!= None:
1747 EdkLogger
.SetLevel(Option
.debug
+ 1)
1749 EdkLogger
.SetLevel(EdkLogger
.INFO
)
1751 if Option
.LogFile
!= None:
1752 EdkLogger
.SetLogFile(Option
.LogFile
)
1754 if Option
.WarningAsError
== True:
1755 EdkLogger
.SetWarningAsError()
1757 if platform
.platform().find("Windows") >= 0:
1758 GlobalData
.gIsWindows
= True
1760 GlobalData
.gIsWindows
= False
1762 EdkLogger
.quiet("Build environment: %s" % platform
.platform())
1763 EdkLogger
.quiet(time
.strftime("Build start time: %H:%M:%S, %b.%d %Y\n", time
.localtime()));
1767 if len(Target
) == 0:
1769 elif len(Target
) >= 2:
1770 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "More than one targets are not supported.",
1771 ExtraData
="Please select one of: %s" %(' '.join(gSupportedTarget
)))
1773 Target
= Target
[0].lower()
1775 if Target
not in gSupportedTarget
:
1776 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "Not supported target [%s]." % Target
,
1777 ExtraData
="Please select one of: %s" %(' '.join(gSupportedTarget
)))
1780 # Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH
1783 GlobalData
.gCommandLineDefines
.update(ParseDefines(Option
.Macros
))
1785 Workspace
= os
.getenv("WORKSPACE")
1787 # Get files real name in workspace dir
1789 GlobalData
.gAllFiles
= Utils
.DirCache(Workspace
)
1791 WorkingDirectory
= os
.getcwd()
1792 if not Option
.ModuleFile
:
1793 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.inf')))
1794 FileNum
= len(FileList
)
1796 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "There are %d INF files in %s." % (FileNum
, WorkingDirectory
),
1797 ExtraData
="Please use '-m <INF_FILE_PATH>' switch to choose one.")
1799 Option
.ModuleFile
= NormFile(FileList
[0], Workspace
)
1801 if Option
.ModuleFile
:
1802 if os
.path
.isabs (Option
.ModuleFile
):
1803 if os
.path
.normcase (os
.path
.normpath(Option
.ModuleFile
)).find (Workspace
) == 0:
1804 Option
.ModuleFile
= NormFile(os
.path
.normpath(Option
.ModuleFile
), Workspace
)
1805 Option
.ModuleFile
= PathClass(Option
.ModuleFile
, Workspace
)
1806 ErrorCode
, ErrorInfo
= Option
.ModuleFile
.Validate(".inf", False)
1808 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
1810 if Option
.PlatformFile
!= None:
1811 if os
.path
.isabs (Option
.PlatformFile
):
1812 if os
.path
.normcase (os
.path
.normpath(Option
.PlatformFile
)).find (Workspace
) == 0:
1813 Option
.PlatformFile
= NormFile(os
.path
.normpath(Option
.PlatformFile
), Workspace
)
1814 Option
.PlatformFile
= PathClass(Option
.PlatformFile
, Workspace
)
1816 if Option
.FdfFile
!= None:
1817 if os
.path
.isabs (Option
.FdfFile
):
1818 if os
.path
.normcase (os
.path
.normpath(Option
.FdfFile
)).find (Workspace
) == 0:
1819 Option
.FdfFile
= NormFile(os
.path
.normpath(Option
.FdfFile
), Workspace
)
1820 Option
.FdfFile
= PathClass(Option
.FdfFile
, Workspace
)
1821 ErrorCode
, ErrorInfo
= Option
.FdfFile
.Validate(".fdf", False)
1823 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
1825 if Option
.Flag
!= None and Option
.Flag
not in ['-c', '-s']:
1826 EdkLogger
.error("build", OPTION_VALUE_INVALID
, "UNI flag must be one of -c or -s")
1828 MyBuild
= Build(Target
, Workspace
, Option
)
1829 GlobalData
.gCommandLineDefines
['ARCH'] = ' '.join(MyBuild
.ArchList
)
1831 # Drop temp tables to avoid database locked.
1832 for TmpTableName
in TmpTableDict
:
1833 SqlCommand
= """drop table IF EXISTS %s""" % TmpTableName
1834 TmpTableDict
[TmpTableName
].execute(SqlCommand
)
1835 #MyBuild.DumpBuildData()
1836 except FatalError
, X
:
1838 # for multi-thread build exits safely
1839 MyBuild
.Relinquish()
1840 if Option
!= None and Option
.debug
!= None:
1841 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
1842 ReturnCode
= X
.args
[0]
1844 # error from Fdf parser
1846 # for multi-thread build exits safely
1847 MyBuild
.Relinquish()
1848 if Option
!= None and Option
.debug
!= None:
1849 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
1851 EdkLogger
.error(X
.ToolName
, FORMAT_INVALID
, File
=X
.FileName
, Line
=X
.LineNumber
, ExtraData
=X
.Message
, RaiseError
= False)
1852 ReturnCode
= FORMAT_INVALID
1853 except KeyboardInterrupt:
1854 ReturnCode
= ABORT_ERROR
1855 if Option
!= None and Option
.debug
!= None:
1856 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
1859 # for multi-thread build exits safely
1860 MyBuild
.Relinquish()
1862 # try to get the meta-file from the object causing exception
1863 Tb
= sys
.exc_info()[-1]
1864 MetaFile
= GlobalData
.gProcessingFile
1866 if 'self' in Tb
.tb_frame
.f_locals
and hasattr(Tb
.tb_frame
.f_locals
['self'], 'MetaFile'):
1867 MetaFile
= Tb
.tb_frame
.f_locals
['self'].MetaFile
1872 "Unknown fatal error when processing [%s]" % MetaFile
,
1873 ExtraData
="\n(Please send email to edk2-buildtools-devel@lists.sourceforge.net for help, attaching following call stack trace!)\n",
1876 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
1877 ReturnCode
= CODE_ERROR
1879 Utils
.Progressor
.Abort()
1883 elif ReturnCode
== ABORT_ERROR
:
1884 Conclusion
= "Aborted"
1886 Conclusion
= "Failed"
1887 FinishTime
= time
.time()
1888 BuildDuration
= time
.gmtime(int(round(FinishTime
- StartTime
)))
1889 BuildDurationStr
= ""
1890 if BuildDuration
.tm_yday
> 1:
1891 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
) + ", %d day(s)"%(BuildDuration
.tm_yday
- 1)
1893 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
)
1895 MyBuild
.BuildReport
.GenerateReport(BuildDurationStr
)
1897 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
1898 EdkLogger
.quiet("\n- %s -" % Conclusion
)
1899 EdkLogger
.quiet(time
.strftime("Build end time: %H:%M:%S, %b.%d %Y", time
.localtime()))
1900 EdkLogger
.quiet("Build total time: %s\n" % BuildDurationStr
)
1903 if __name__
== '__main__':
1905 ## 0-127 is a safe return range, and 1 is a standard default error
1906 if r
< 0 or r
> 127: r
= 1