2 # build a platform or a module
4 # Copyright (c) 2014, Hewlett-Packard Development Company, L.P.<BR>
5 # Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>
7 # This program and the accompanying materials
8 # are licensed and made available under the terms and conditions of the BSD License
9 # which accompanies this distribution. The full text of the license may be found at
10 # http://opensource.org/licenses/bsd-license.php
12 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
19 import Common
.LongFilePathOs
as os
27 import encodings
.ascii
30 from threading
import *
31 from optparse
import OptionParser
32 from subprocess
import *
33 from Common
import Misc
as Utils
35 from Common
.LongFilePathSupport
import OpenLongFilePath
as open
36 from Common
.LongFilePathSupport
import LongFilePath
37 from Common
.TargetTxtClassObject
import *
38 from Common
.ToolDefClassObject
import *
39 from Common
.DataType
import *
40 from Common
.BuildVersion
import gBUILD_VERSION
41 from AutoGen
.AutoGen
import *
42 from Common
.BuildToolError
import *
43 from Workspace
.WorkspaceDatabase
import *
44 from Common
.MultipleWorkspace
import MultipleWorkspace
as mws
46 from BuildReport
import BuildReport
47 from GenPatchPcdTable
.GenPatchPcdTable
import *
48 from PatchPcdValue
.PatchPcdValue
import *
50 import Common
.EdkLogger
51 import Common
.GlobalData
as GlobalData
53 # Version and Copyright
54 VersionNumber
= "0.60" + ' ' + gBUILD_VERSION
55 __version__
= "%prog Version " + VersionNumber
56 __copyright__
= "Copyright (c) 2007 - 2016, Intel Corporation All rights reserved."
58 ## standard targets of build command
59 gSupportedTarget
= ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']
61 ## build configuration file
62 gBuildConfiguration
= "target.txt"
63 gToolsDefinition
= "tools_def.txt"
65 TemporaryTablePattern
= re
.compile(r
'^_\d+_\d+_[a-fA-F0-9]+$')
68 ## Check environment PATH variable to make sure the specified tool is found
70 # If the tool is found in the PATH, then True is returned
71 # Otherwise, False is returned
73 def IsToolInPath(tool
):
74 if os
.environ
.has_key('PATHEXT'):
75 extns
= os
.environ
['PATHEXT'].split(os
.path
.pathsep
)
78 for pathDir
in os
.environ
['PATH'].split(os
.path
.pathsep
):
80 if os
.path
.exists(os
.path
.join(pathDir
, tool
+ ext
)):
84 ## Check environment variables
86 # Check environment variables that must be set for build. Currently they are
88 # WORKSPACE The directory all packages/platforms start from
89 # EDK_TOOLS_PATH The directory contains all tools needed by the build
90 # PATH $(EDK_TOOLS_PATH)/Bin/<sys> must be set in PATH
92 # If any of above environment variable is not set or has error, the build
95 def CheckEnvVariable():
97 if "WORKSPACE" not in os
.environ
:
98 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
99 ExtraData
="WORKSPACE")
101 WorkspaceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["WORKSPACE"]))
102 if not os
.path
.exists(WorkspaceDir
):
103 EdkLogger
.error("build", FILE_NOT_FOUND
, "WORKSPACE doesn't exist", ExtraData
="%s" % WorkspaceDir
)
104 elif ' ' in WorkspaceDir
:
105 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in WORKSPACE path",
106 ExtraData
=WorkspaceDir
)
107 os
.environ
["WORKSPACE"] = WorkspaceDir
109 # set multiple workspace
110 PackagesPath
= os
.getenv("PACKAGES_PATH")
111 mws
.setWs(WorkspaceDir
, PackagesPath
)
114 # Check EFI_SOURCE (Edk build convention). EDK_SOURCE will always point to ECP
116 if "ECP_SOURCE" not in os
.environ
:
117 os
.environ
["ECP_SOURCE"] = mws
.join(WorkspaceDir
, GlobalData
.gEdkCompatibilityPkg
)
118 if "EFI_SOURCE" not in os
.environ
:
119 os
.environ
["EFI_SOURCE"] = os
.environ
["ECP_SOURCE"]
120 if "EDK_SOURCE" not in os
.environ
:
121 os
.environ
["EDK_SOURCE"] = os
.environ
["ECP_SOURCE"]
124 # Unify case of characters on case-insensitive systems
126 EfiSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EFI_SOURCE"]))
127 EdkSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["EDK_SOURCE"]))
128 EcpSourceDir
= os
.path
.normcase(os
.path
.normpath(os
.environ
["ECP_SOURCE"]))
130 os
.environ
["EFI_SOURCE"] = EfiSourceDir
131 os
.environ
["EDK_SOURCE"] = EdkSourceDir
132 os
.environ
["ECP_SOURCE"] = EcpSourceDir
133 os
.environ
["EDK_TOOLS_PATH"] = os
.path
.normcase(os
.environ
["EDK_TOOLS_PATH"])
135 if not os
.path
.exists(EcpSourceDir
):
136 EdkLogger
.verbose("ECP_SOURCE = %s doesn't exist. Edk modules could not be built." % EcpSourceDir
)
137 elif ' ' in EcpSourceDir
:
138 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in ECP_SOURCE path",
139 ExtraData
=EcpSourceDir
)
140 if not os
.path
.exists(EdkSourceDir
):
141 if EdkSourceDir
== EcpSourceDir
:
142 EdkLogger
.verbose("EDK_SOURCE = %s doesn't exist. Edk modules could not be built." % EdkSourceDir
)
144 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE does not exist",
145 ExtraData
=EdkSourceDir
)
146 elif ' ' in EdkSourceDir
:
147 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EDK_SOURCE path",
148 ExtraData
=EdkSourceDir
)
149 if not os
.path
.exists(EfiSourceDir
):
150 if EfiSourceDir
== EcpSourceDir
:
151 EdkLogger
.verbose("EFI_SOURCE = %s doesn't exist. Edk modules could not be built." % EfiSourceDir
)
153 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE does not exist",
154 ExtraData
=EfiSourceDir
)
155 elif ' ' in EfiSourceDir
:
156 EdkLogger
.error("build", FORMAT_NOT_SUPPORTED
, "No space is allowed in EFI_SOURCE path",
157 ExtraData
=EfiSourceDir
)
159 # check those variables on single workspace case
161 # change absolute path to relative path to WORKSPACE
162 if EfiSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
163 EdkLogger
.error("build", PARAMETER_INVALID
, "EFI_SOURCE is not under WORKSPACE",
164 ExtraData
="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir
, EfiSourceDir
))
165 if EdkSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
166 EdkLogger
.error("build", PARAMETER_INVALID
, "EDK_SOURCE is not under WORKSPACE",
167 ExtraData
="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir
, EdkSourceDir
))
168 if EcpSourceDir
.upper().find(WorkspaceDir
.upper()) != 0:
169 EdkLogger
.error("build", PARAMETER_INVALID
, "ECP_SOURCE is not under WORKSPACE",
170 ExtraData
="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir
, EcpSourceDir
))
172 # check EDK_TOOLS_PATH
173 if "EDK_TOOLS_PATH" not in os
.environ
:
174 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
175 ExtraData
="EDK_TOOLS_PATH")
178 if "PATH" not in os
.environ
:
179 EdkLogger
.error("build", ATTRIBUTE_NOT_AVAILABLE
, "Environment variable not found",
182 GlobalData
.gWorkspace
= WorkspaceDir
183 GlobalData
.gEfiSource
= EfiSourceDir
184 GlobalData
.gEdkSource
= EdkSourceDir
185 GlobalData
.gEcpSource
= EcpSourceDir
187 GlobalData
.gGlobalDefines
["WORKSPACE"] = WorkspaceDir
188 GlobalData
.gGlobalDefines
["EFI_SOURCE"] = EfiSourceDir
189 GlobalData
.gGlobalDefines
["EDK_SOURCE"] = EdkSourceDir
190 GlobalData
.gGlobalDefines
["ECP_SOURCE"] = EcpSourceDir
191 GlobalData
.gGlobalDefines
["EDK_TOOLS_PATH"] = os
.environ
["EDK_TOOLS_PATH"]
193 ## Get normalized file path
195 # Convert the path to be local format, and remove the WORKSPACE path at the
196 # beginning if the file path is given in full path.
198 # @param FilePath File path to be normalized
199 # @param Workspace Workspace path which the FilePath will be checked against
201 # @retval string The normalized file path
203 def NormFile(FilePath
, Workspace
):
204 # check if the path is absolute or relative
205 if os
.path
.isabs(FilePath
):
206 FileFullPath
= os
.path
.normpath(FilePath
)
208 FileFullPath
= os
.path
.normpath(mws
.join(Workspace
, FilePath
))
209 Workspace
= mws
.getWs(Workspace
, FilePath
)
211 # check if the file path exists or not
212 if not os
.path
.isfile(FileFullPath
):
213 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath
)
215 # remove workspace directory from the beginning part of the file path
216 if Workspace
[-1] in ["\\", "/"]:
217 return FileFullPath
[len(Workspace
):]
219 return FileFullPath
[(len(Workspace
) + 1):]
221 ## Get the output of an external program
223 # This is the entrance method of thread reading output of an external program and
224 # putting them in STDOUT/STDERR of current program.
226 # @param From The stream message read from
227 # @param To The stream message put on
228 # @param ExitFlag The flag used to indicate stopping reading
230 def ReadMessage(From
, To
, ExitFlag
):
232 # read one line a time
233 Line
= From
.readline()
234 # empty string means "end"
235 if Line
!= None and Line
!= "":
242 ## Launch an external program
244 # This method will call subprocess.Popen to execute an external program with
245 # given options in specified directory. Because of the dead-lock issue during
246 # redirecting output of the external program, threads are used to to do the
249 # @param Command A list or string containing the call of the program
250 # @param WorkingDir The directory in which the program will be running
252 def LaunchCommand(Command
, WorkingDir
):
253 # if working directory doesn't exist, Popen() will raise an exception
254 if not os
.path
.isdir(WorkingDir
):
255 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=WorkingDir
)
257 # Command is used as the first Argument in following Popen().
258 # It could be a string or sequence. We find that if command is a string in following Popen(),
259 # ubuntu may fail with an error message that the command is not found.
260 # So here we may need convert command from string to list instance.
261 if not isinstance(Command
, list):
262 if platform
.system() != 'Windows':
263 Command
= Command
.split()
266 EndOfProcedure
= None
269 Proc
= Popen(Command
, stdout
=PIPE
, stderr
=PIPE
, env
=os
.environ
, cwd
=WorkingDir
, bufsize
=-1)
271 # launch two threads to read the STDOUT and STDERR
272 EndOfProcedure
= Event()
273 EndOfProcedure
.clear()
275 StdOutThread
= Thread(target
=ReadMessage
, args
=(Proc
.stdout
, EdkLogger
.info
, EndOfProcedure
))
276 StdOutThread
.setName("STDOUT-Redirector")
277 StdOutThread
.setDaemon(False)
281 StdErrThread
= Thread(target
=ReadMessage
, args
=(Proc
.stderr
, EdkLogger
.quiet
, EndOfProcedure
))
282 StdErrThread
.setName("STDERR-Redirector")
283 StdErrThread
.setDaemon(False)
286 # waiting for program exit
288 except: # in case of aborting
289 # terminate the threads redirecting the program output
290 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
291 if EndOfProcedure
!= None:
294 if type(Command
) != type(""):
295 Command
= " ".join(Command
)
296 EdkLogger
.error("build", COMMAND_FAILURE
, "Failed to start command", ExtraData
="%s [%s]" % (Command
, WorkingDir
))
303 # check the return code of the program
304 if Proc
.returncode
!= 0:
305 if type(Command
) != type(""):
306 Command
= " ".join(Command
)
307 EdkLogger
.error("build", COMMAND_FAILURE
, ExtraData
="%s [%s]" % (Command
, WorkingDir
))
309 ## The smallest unit that can be built in multi-thread build mode
311 # This is the base class of build unit. The "Obj" parameter must provide
312 # __str__(), __eq__() and __hash__() methods. Otherwise there could be build units
315 # Currently the "Obj" should be only ModuleAutoGen or PlatformAutoGen objects.
320 # @param self The object pointer
321 # @param Obj The object the build is working on
322 # @param Target The build target name, one of gSupportedTarget
323 # @param Dependency The BuildUnit(s) which must be completed in advance
324 # @param WorkingDir The directory build command starts in
326 def __init__(self
, Obj
, BuildCommand
, Target
, Dependency
, WorkingDir
="."):
327 self
.BuildObject
= Obj
328 self
.Dependency
= Dependency
329 self
.WorkingDir
= WorkingDir
331 self
.BuildCommand
= BuildCommand
333 EdkLogger
.error("build", OPTION_MISSING
,
334 "No build command found for this module. "
335 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
336 (Obj
.BuildTarget
, Obj
.ToolChain
, Obj
.Arch
),
342 # It just returns the string representation of self.BuildObject
344 # @param self The object pointer
347 return str(self
.BuildObject
)
349 ## "==" operator method
351 # It just compares self.BuildObject with "Other". So self.BuildObject must
352 # provide its own __eq__() method.
354 # @param self The object pointer
355 # @param Other The other BuildUnit object compared to
357 def __eq__(self
, Other
):
358 return Other
!= None and self
.BuildObject
== Other
.BuildObject \
359 and self
.BuildObject
.Arch
== Other
.BuildObject
.Arch
363 # It just returns the hash value of self.BuildObject which must be hashable.
365 # @param self The object pointer
368 return hash(self
.BuildObject
) + hash(self
.BuildObject
.Arch
)
371 return repr(self
.BuildObject
)
373 ## The smallest module unit that can be built by nmake/make command in multi-thread build mode
375 # This class is for module build by nmake/make build system. The "Obj" parameter
376 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
377 # be make units missing build.
379 # Currently the "Obj" should be only ModuleAutoGen object.
381 class ModuleMakeUnit(BuildUnit
):
384 # @param self The object pointer
385 # @param Obj The ModuleAutoGen object the build is working on
386 # @param Target The build target name, one of gSupportedTarget
388 def __init__(self
, Obj
, Target
):
389 Dependency
= [ModuleMakeUnit(La
, Target
) for La
in Obj
.LibraryAutoGenList
]
390 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
391 if Target
in [None, "", "all"]:
392 self
.Target
= "tbuild"
394 ## The smallest platform unit that can be built by nmake/make command in multi-thread build mode
396 # This class is for platform build by nmake/make build system. The "Obj" parameter
397 # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
398 # be make units missing build.
400 # Currently the "Obj" should be only PlatformAutoGen object.
402 class PlatformMakeUnit(BuildUnit
):
405 # @param self The object pointer
406 # @param Obj The PlatformAutoGen object the build is working on
407 # @param Target The build target name, one of gSupportedTarget
409 def __init__(self
, Obj
, Target
):
410 Dependency
= [ModuleMakeUnit(Lib
, Target
) for Lib
in self
.BuildObject
.LibraryAutoGenList
]
411 Dependency
.extend([ModuleMakeUnit(Mod
, Target
) for Mod
in self
.BuildObject
.ModuleAutoGenList
])
412 BuildUnit
.__init
__(self
, Obj
, Obj
.BuildCommand
, Target
, Dependency
, Obj
.MakeFileDir
)
414 ## The class representing the task of a module build or platform build
416 # This class manages the build tasks in multi-thread build mode. Its jobs include
417 # scheduling thread running, catching thread error, monitor the thread status, etc.
420 # queue for tasks waiting for schedule
421 _PendingQueue
= sdict()
422 _PendingQueueLock
= threading
.Lock()
424 # queue for tasks ready for running
425 _ReadyQueue
= sdict()
426 _ReadyQueueLock
= threading
.Lock()
428 # queue for run tasks
429 _RunningQueue
= sdict()
430 _RunningQueueLock
= threading
.Lock()
432 # queue containing all build tasks, in case duplicate build
435 # flag indicating error occurs in a running thread
436 _ErrorFlag
= threading
.Event()
440 # BoundedSemaphore object used to control the number of running threads
443 # flag indicating if the scheduler is started or not
444 _SchedulerStopped
= threading
.Event()
445 _SchedulerStopped
.set()
447 ## Start the task scheduler thread
449 # @param MaxThreadNumber The maximum thread number
450 # @param ExitFlag Flag used to end the scheduler
453 def StartScheduler(MaxThreadNumber
, ExitFlag
):
454 SchedulerThread
= Thread(target
=BuildTask
.Scheduler
, args
=(MaxThreadNumber
, ExitFlag
))
455 SchedulerThread
.setName("Build-Task-Scheduler")
456 SchedulerThread
.setDaemon(False)
457 SchedulerThread
.start()
458 # wait for the scheduler to be started, especially useful in Linux
459 while not BuildTask
.IsOnGoing():
464 # @param MaxThreadNumber The maximum thread number
465 # @param ExitFlag Flag used to end the scheduler
468 def Scheduler(MaxThreadNumber
, ExitFlag
):
469 BuildTask
._SchedulerStopped
.clear()
471 # use BoundedSemaphore to control the maximum running threads
472 BuildTask
._Thread
= BoundedSemaphore(MaxThreadNumber
)
474 # scheduling loop, which will exits when no pending/ready task and
475 # indicated to do so, or there's error in running thread
477 while (len(BuildTask
._PendingQueue
) > 0 or len(BuildTask
._ReadyQueue
) > 0 \
478 or not ExitFlag
.isSet()) and not BuildTask
._ErrorFlag
.isSet():
479 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Pending Queue (%d), Ready Queue (%d)"
480 % (len(BuildTask
._PendingQueue
), len(BuildTask
._ReadyQueue
)))
482 # get all pending tasks
483 BuildTask
._PendingQueueLock
.acquire()
484 BuildObjectList
= BuildTask
._PendingQueue
.keys()
486 # check if their dependency is resolved, and if true, move them
489 for BuildObject
in BuildObjectList
:
490 Bt
= BuildTask
._PendingQueue
[BuildObject
]
492 BuildTask
._ReadyQueue
[BuildObject
] = BuildTask
._PendingQueue
.pop(BuildObject
)
493 BuildTask
._PendingQueueLock
.release()
495 # launch build thread until the maximum number of threads is reached
496 while not BuildTask
._ErrorFlag
.isSet():
497 # empty ready queue, do nothing further
498 if len(BuildTask
._ReadyQueue
) == 0:
501 # wait for active thread(s) exit
502 BuildTask
._Thread
.acquire(True)
504 # start a new build thread
505 Bo
= BuildTask
._ReadyQueue
.keys()[0]
506 Bt
= BuildTask
._ReadyQueue
.pop(Bo
)
508 # move into running queue
509 BuildTask
._RunningQueueLock
.acquire()
510 BuildTask
._RunningQueue
[Bo
] = Bt
511 BuildTask
._RunningQueueLock
.release()
520 # wait for all running threads exit
521 if BuildTask
._ErrorFlag
.isSet():
522 EdkLogger
.quiet("\nWaiting for all build threads exit...")
523 # while not BuildTask._ErrorFlag.isSet() and \
524 while len(BuildTask
._RunningQueue
) > 0:
525 EdkLogger
.verbose("Waiting for thread ending...(%d)" % len(BuildTask
._RunningQueue
))
526 EdkLogger
.debug(EdkLogger
.DEBUG_8
, "Threads [%s]" % ", ".join([Th
.getName() for Th
in threading
.enumerate()]))
529 except BaseException
, X
:
531 # TRICK: hide the output of threads left runing, so that the user can
532 # catch the error message easily
534 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
535 BuildTask
._ErrorFlag
.set()
536 BuildTask
._ErrorMessage
= "build thread scheduler error\n\t%s" % str(X
)
538 BuildTask
._PendingQueue
.clear()
539 BuildTask
._ReadyQueue
.clear()
540 BuildTask
._RunningQueue
.clear()
541 BuildTask
._TaskQueue
.clear()
542 BuildTask
._SchedulerStopped
.set()
544 ## Wait for all running method exit
547 def WaitForComplete():
548 BuildTask
._SchedulerStopped
.wait()
550 ## Check if the scheduler is running or not
554 return not BuildTask
._SchedulerStopped
.isSet()
559 if BuildTask
.IsOnGoing():
560 BuildTask
._ErrorFlag
.set()
561 BuildTask
.WaitForComplete()
563 ## Check if there's error in running thread
565 # Since the main thread cannot catch exceptions in other thread, we have to
566 # use threading.Event to communicate this formation to main thread.
570 return BuildTask
._ErrorFlag
.isSet()
572 ## Get error message in running thread
574 # Since the main thread cannot catch exceptions in other thread, we have to
575 # use a static variable to communicate this message to main thread.
578 def GetErrorMessage():
579 return BuildTask
._ErrorMessage
581 ## Factory method to create a BuildTask object
583 # This method will check if a module is building or has been built. And if
584 # true, just return the associated BuildTask object in the _TaskQueue. If
585 # not, create and return a new BuildTask object. The new BuildTask object
586 # will be appended to the _PendingQueue for scheduling later.
588 # @param BuildItem A BuildUnit object representing a build object
589 # @param Dependency The dependent build object of BuildItem
592 def New(BuildItem
, Dependency
=None):
593 if BuildItem
in BuildTask
._TaskQueue
:
594 Bt
= BuildTask
._TaskQueue
[BuildItem
]
598 Bt
._Init
(BuildItem
, Dependency
)
599 BuildTask
._TaskQueue
[BuildItem
] = Bt
601 BuildTask
._PendingQueueLock
.acquire()
602 BuildTask
._PendingQueue
[BuildItem
] = Bt
603 BuildTask
._PendingQueueLock
.release()
607 ## The real constructor of BuildTask
609 # @param BuildItem A BuildUnit object representing a build object
610 # @param Dependency The dependent build object of BuildItem
612 def _Init(self
, BuildItem
, Dependency
=None):
613 self
.BuildItem
= BuildItem
615 self
.DependencyList
= []
616 if Dependency
== None:
617 Dependency
= BuildItem
.Dependency
619 Dependency
.extend(BuildItem
.Dependency
)
620 self
.AddDependency(Dependency
)
621 # flag indicating build completes, used to avoid unnecessary re-build
622 self
.CompleteFlag
= False
624 ## Check if all dependent build tasks are completed or not
628 for Dep
in self
.DependencyList
:
629 if Dep
.CompleteFlag
== True:
636 ## Add dependent build task
638 # @param Dependency The list of dependent build objects
640 def AddDependency(self
, Dependency
):
641 for Dep
in Dependency
:
642 if not Dep
.BuildObject
.IsBinaryModule
:
643 self
.DependencyList
.append(BuildTask
.New(Dep
)) # BuildTask list
645 ## The thread wrapper of LaunchCommand function
647 # @param Command A list or string contains the call of the command
648 # @param WorkingDir The directory in which the program will be running
650 def _CommandThread(self
, Command
, WorkingDir
):
652 LaunchCommand(Command
, WorkingDir
)
653 self
.CompleteFlag
= True
656 # TRICK: hide the output of threads left runing, so that the user can
657 # catch the error message easily
659 if not BuildTask
._ErrorFlag
.isSet():
660 GlobalData
.gBuildingModule
= "%s [%s, %s, %s]" % (str(self
.BuildItem
.BuildObject
),
661 self
.BuildItem
.BuildObject
.Arch
,
662 self
.BuildItem
.BuildObject
.ToolChain
,
663 self
.BuildItem
.BuildObject
.BuildTarget
665 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
666 BuildTask
._ErrorFlag
.set()
667 BuildTask
._ErrorMessage
= "%s broken\n %s [%s]" % \
668 (threading
.currentThread().getName(), Command
, WorkingDir
)
669 # indicate there's a thread is available for another build task
670 BuildTask
._RunningQueueLock
.acquire()
671 BuildTask
._RunningQueue
.pop(self
.BuildItem
)
672 BuildTask
._RunningQueueLock
.release()
673 BuildTask
._Thread
.release()
675 ## Start build task thread
678 EdkLogger
.quiet("Building ... %s" % repr(self
.BuildItem
))
679 Command
= self
.BuildItem
.BuildCommand
+ [self
.BuildItem
.Target
]
680 self
.BuildTread
= Thread(target
=self
._CommandThread
, args
=(Command
, self
.BuildItem
.WorkingDir
))
681 self
.BuildTread
.setName("build thread")
682 self
.BuildTread
.setDaemon(False)
683 self
.BuildTread
.start()
685 ## The class contains the information related to EFI image
690 # Constructor will load all required image information.
692 # @param BaseName The full file path of image.
693 # @param Guid The GUID for image.
694 # @param Arch Arch of this image.
695 # @param OutputDir The output directory for image.
696 # @param DebugDir The debug directory for image.
697 # @param ImageClass PeImage Information
699 def __init__(self
, BaseName
, Guid
, Arch
, OutputDir
, DebugDir
, ImageClass
):
700 self
.BaseName
= BaseName
703 self
.OutputDir
= OutputDir
704 self
.DebugDir
= DebugDir
705 self
.Image
= ImageClass
706 self
.Image
.Size
= (self
.Image
.Size
/ 0x1000 + 1) * 0x1000
708 ## The class implementing the EDK2 build process
710 # The build process includes:
711 # 1. Load configuration from target.txt and tools_def.txt in $(WORKSPACE)/Conf
712 # 2. Parse DSC file of active platform
713 # 3. Parse FDF file if any
714 # 4. Establish build database, including parse all other files (module, package)
715 # 5. Create AutoGen files (C code file, depex file, makefile) if necessary
716 # 6. Call build command
721 # Constructor will load all necessary configurations, parse platform, modules
722 # and packages and the establish a database for AutoGen.
724 # @param Target The build command target, one of gSupportedTarget
725 # @param WorkspaceDir The directory of workspace
726 # @param BuildOptions Build options passed from command line
728 def __init__(self
, Target
, WorkspaceDir
, BuildOptions
):
729 self
.WorkspaceDir
= WorkspaceDir
731 self
.PlatformFile
= BuildOptions
.PlatformFile
732 self
.ModuleFile
= BuildOptions
.ModuleFile
733 self
.ArchList
= BuildOptions
.TargetArch
734 self
.ToolChainList
= BuildOptions
.ToolChain
735 self
.BuildTargetList
= BuildOptions
.BuildTarget
736 self
.Fdf
= BuildOptions
.FdfFile
737 self
.FdList
= BuildOptions
.RomImage
738 self
.FvList
= BuildOptions
.FvImage
739 self
.CapList
= BuildOptions
.CapName
740 self
.SilentMode
= BuildOptions
.SilentMode
741 self
.ThreadNumber
= BuildOptions
.ThreadNumber
742 self
.SkipAutoGen
= BuildOptions
.SkipAutoGen
743 self
.Reparse
= BuildOptions
.Reparse
744 self
.SkuId
= BuildOptions
.SkuId
745 self
.ConfDirectory
= BuildOptions
.ConfDirectory
746 self
.SpawnMode
= True
747 self
.BuildReport
= BuildReport(BuildOptions
.ReportFile
, BuildOptions
.ReportType
)
748 self
.TargetTxt
= TargetTxtClassObject()
749 self
.ToolDef
= ToolDefClassObject()
750 GlobalData
.BuildOptionPcd
= BuildOptions
.OptionPcd
751 #Set global flag for build mode
752 GlobalData
.gIgnoreSource
= BuildOptions
.IgnoreSources
754 if self
.ConfDirectory
:
755 # Get alternate Conf location, if it is absolute, then just use the absolute directory name
756 ConfDirectoryPath
= os
.path
.normpath(self
.ConfDirectory
)
758 if not os
.path
.isabs(ConfDirectoryPath
):
759 # Since alternate directory name is not absolute, the alternate directory is located within the WORKSPACE
760 # This also handles someone specifying the Conf directory in the workspace. Using --conf=Conf
761 ConfDirectoryPath
= mws
.join(self
.WorkspaceDir
, ConfDirectoryPath
)
763 # Get standard WORKSPACE/Conf use the absolute path to the WORKSPACE/Conf
764 ConfDirectoryPath
= mws
.join(self
.WorkspaceDir
, 'Conf')
765 GlobalData
.gConfDirectory
= ConfDirectoryPath
766 GlobalData
.gDatabasePath
= os
.path
.normpath(os
.path
.join(ConfDirectoryPath
, GlobalData
.gDatabasePath
))
768 if BuildOptions
.DisableCache
:
769 self
.Db
= WorkspaceDatabase(":memory:")
771 self
.Db
= WorkspaceDatabase(GlobalData
.gDatabasePath
, self
.Reparse
)
772 self
.BuildDatabase
= self
.Db
.BuildObject
774 self
.LoadFixAddress
= 0
775 self
.UniFlag
= BuildOptions
.Flag
776 self
.BuildModules
= []
778 # print dot character during doing some time-consuming work
779 self
.Progress
= Utils
.Progressor()
783 # print current build environment and configuration
784 EdkLogger
.quiet("%-16s = %s" % ("WORKSPACE", os
.environ
["WORKSPACE"]))
785 if "PACKAGES_PATH" in os
.environ
:
786 # WORKSPACE env has been converted before. Print the same path style with WORKSPACE env.
787 EdkLogger
.quiet("%-16s = %s" % ("PACKAGES_PATH", os
.path
.normcase(os
.path
.normpath(os
.environ
["PACKAGES_PATH"]))))
788 EdkLogger
.quiet("%-16s = %s" % ("ECP_SOURCE", os
.environ
["ECP_SOURCE"]))
789 EdkLogger
.quiet("%-16s = %s" % ("EDK_SOURCE", os
.environ
["EDK_SOURCE"]))
790 EdkLogger
.quiet("%-16s = %s" % ("EFI_SOURCE", os
.environ
["EFI_SOURCE"]))
791 EdkLogger
.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os
.environ
["EDK_TOOLS_PATH"]))
792 if "EDK_TOOLS_BIN" in os
.environ
:
793 # Print the same path style with WORKSPACE env.
794 EdkLogger
.quiet("%-16s = %s" % ("EDK_TOOLS_BIN", os
.path
.normcase(os
.path
.normpath(os
.environ
["EDK_TOOLS_BIN"]))))
798 os
.chdir(self
.WorkspaceDir
)
800 ## Load configuration
802 # This method will parse target.txt and get the build configurations.
804 def LoadConfiguration(self
):
806 # Check target.txt and tools_def.txt and Init them
808 BuildConfigurationFile
= os
.path
.normpath(os
.path
.join(GlobalData
.gConfDirectory
, gBuildConfiguration
))
809 if os
.path
.isfile(BuildConfigurationFile
) == True:
810 StatusCode
= self
.TargetTxt
.LoadTargetTxtFile(BuildConfigurationFile
)
812 ToolDefinitionFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_CONF
]
813 if ToolDefinitionFile
== '':
814 ToolDefinitionFile
= gToolsDefinition
815 ToolDefinitionFile
= os
.path
.normpath(mws
.join(self
.WorkspaceDir
, 'Conf', ToolDefinitionFile
))
816 if os
.path
.isfile(ToolDefinitionFile
) == True:
817 StatusCode
= self
.ToolDef
.LoadToolDefFile(ToolDefinitionFile
)
819 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=ToolDefinitionFile
)
821 EdkLogger
.error("build", FILE_NOT_FOUND
, ExtraData
=BuildConfigurationFile
)
823 # if no ARCH given in command line, get it from target.txt
824 if not self
.ArchList
:
825 self
.ArchList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET_ARCH
]
826 self
.ArchList
= tuple(self
.ArchList
)
828 # if no build target given in command line, get it from target.txt
829 if not self
.BuildTargetList
:
830 self
.BuildTargetList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TARGET
]
832 # if no tool chain given in command line, get it from target.txt
833 if not self
.ToolChainList
:
834 self
.ToolChainList
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_TOOL_CHAIN_TAG
]
835 if self
.ToolChainList
== None or len(self
.ToolChainList
) == 0:
836 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
, ExtraData
="No toolchain given. Don't know how to build.\n")
838 # check if the tool chains are defined or not
839 NewToolChainList
= []
840 for ToolChain
in self
.ToolChainList
:
841 if ToolChain
not in self
.ToolDef
.ToolsDefTxtDatabase
[TAB_TOD_DEFINES_TOOL_CHAIN_TAG
]:
842 EdkLogger
.warn("build", "Tool chain [%s] is not defined" % ToolChain
)
844 NewToolChainList
.append(ToolChain
)
845 # if no tool chain available, break the build
846 if len(NewToolChainList
) == 0:
847 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
848 ExtraData
="[%s] not defined. No toolchain available for build!\n" % ", ".join(self
.ToolChainList
))
850 self
.ToolChainList
= NewToolChainList
852 if self
.ThreadNumber
== None:
853 self
.ThreadNumber
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER
]
854 if self
.ThreadNumber
== '':
855 self
.ThreadNumber
= 0
857 self
.ThreadNumber
= int(self
.ThreadNumber
, 0)
859 if self
.ThreadNumber
== 0:
860 self
.ThreadNumber
= 1
862 if not self
.PlatformFile
:
863 PlatformFile
= self
.TargetTxt
.TargetTxtDictionary
[DataType
.TAB_TAT_DEFINES_ACTIVE_PLATFORM
]
865 # Try to find one in current directory
866 WorkingDirectory
= os
.getcwd()
867 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.dsc')))
868 FileNum
= len(FileList
)
870 EdkLogger
.error("build", OPTION_MISSING
,
871 ExtraData
="There are %d DSC files in %s. Use '-p' to specify one.\n" % (FileNum
, WorkingDirectory
))
873 PlatformFile
= FileList
[0]
875 EdkLogger
.error("build", RESOURCE_NOT_AVAILABLE
,
876 ExtraData
="No active platform specified in target.txt or command line! Nothing can be built.\n")
878 self
.PlatformFile
= PathClass(NormFile(PlatformFile
, self
.WorkspaceDir
), self
.WorkspaceDir
)
880 ## Initialize build configuration
882 # This method will parse DSC file and merge the configurations from
883 # command line and target.txt, then get the final build configurations.
886 # parse target.txt, tools_def.txt, and platform file
887 self
.LoadConfiguration()
889 # Allow case-insensitive for those from command line or configuration file
890 ErrorCode
, ErrorInfo
= self
.PlatformFile
.Validate(".dsc", False)
892 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
894 # create metafile database
895 self
.Db
.InitDatabase()
897 ## Build a module or platform
899 # Create autogen code and makefile for a module or platform, and the launch
900 # "make" command to build it
902 # @param Target The target of build command
903 # @param Platform The platform file
904 # @param Module The module file
905 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
906 # @param ToolChain The name of toolchain to build
907 # @param Arch The arch of the module/platform
908 # @param CreateDepModuleCodeFile Flag used to indicate creating code
909 # for dependent modules/Libraries
910 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
911 # for dependent modules/Libraries
913 def _BuildPa(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True, BuildModule
=False):
914 if AutoGenObject
== None:
917 # skip file generation for cleanxxx targets, run and fds target
918 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
919 # for target which must generate AutoGen code and makefile
920 if not self
.SkipAutoGen
or Target
== 'genc':
921 self
.Progress
.Start("Generating code")
922 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
923 self
.Progress
.Stop("done!")
927 if not self
.SkipAutoGen
or Target
== 'genmake':
928 self
.Progress
.Start("Generating makefile")
929 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
930 self
.Progress
.Stop("done!")
931 if Target
== "genmake":
934 # always recreate top/platform makefile when clean, just in case of inconsistency
935 AutoGenObject
.CreateCodeFile(False)
936 AutoGenObject
.CreateMakeFile(False)
938 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
939 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
941 BuildCommand
= AutoGenObject
.BuildCommand
942 if BuildCommand
== None or len(BuildCommand
) == 0:
943 EdkLogger
.error("build", OPTION_MISSING
,
944 "No build command found for this module. "
945 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
946 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
947 ExtraData
=str(AutoGenObject
))
949 makefile
= GenMake
.BuildFile(AutoGenObject
)._FILE
_NAME
_[GenMake
.gMakeType
]
953 RunDir
= os
.path
.normpath(os
.path
.join(AutoGenObject
.BuildDir
, GlobalData
.gGlobalDefines
['ARCH']))
954 Command
= '.\SecMain'
956 LaunchCommand(Command
, RunDir
)
961 BuildCommand
= BuildCommand
+ [Target
]
962 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
963 self
.CreateAsBuiltInf()
967 if Target
== 'libraries':
968 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
969 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Lib
, makefile
)), 'pbuild']
970 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
974 if Target
== 'modules':
975 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
976 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Lib
, makefile
)), 'pbuild']
977 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
978 for Mod
in AutoGenObject
.ModuleBuildDirectoryList
:
979 NewBuildCommand
= BuildCommand
+ ['-f', os
.path
.normpath(os
.path
.join(Mod
, makefile
)), 'pbuild']
980 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
981 self
.CreateAsBuiltInf()
985 if Target
== 'cleanlib':
986 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
987 LibMakefile
= os
.path
.normpath(os
.path
.join(Lib
, makefile
))
988 if os
.path
.exists(LibMakefile
):
989 NewBuildCommand
= BuildCommand
+ ['-f', LibMakefile
, 'cleanall']
990 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
994 if Target
== 'clean':
995 for Mod
in AutoGenObject
.ModuleBuildDirectoryList
:
996 ModMakefile
= os
.path
.normpath(os
.path
.join(Mod
, makefile
))
997 if os
.path
.exists(ModMakefile
):
998 NewBuildCommand
= BuildCommand
+ ['-f', ModMakefile
, 'cleanall']
999 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1000 for Lib
in AutoGenObject
.LibraryBuildDirectoryList
:
1001 LibMakefile
= os
.path
.normpath(os
.path
.join(Lib
, makefile
))
1002 if os
.path
.exists(LibMakefile
):
1003 NewBuildCommand
= BuildCommand
+ ['-f', LibMakefile
, 'cleanall']
1004 LaunchCommand(NewBuildCommand
, AutoGenObject
.MakeFileDir
)
1008 if Target
== 'cleanall':
1010 #os.rmdir(AutoGenObject.BuildDir)
1011 RemoveDirectory(AutoGenObject
.BuildDir
, True)
1012 except WindowsError, X
:
1013 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
1016 ## Build a module or platform
1018 # Create autogen code and makefile for a module or platform, and the launch
1019 # "make" command to build it
1021 # @param Target The target of build command
1022 # @param Platform The platform file
1023 # @param Module The module file
1024 # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
1025 # @param ToolChain The name of toolchain to build
1026 # @param Arch The arch of the module/platform
1027 # @param CreateDepModuleCodeFile Flag used to indicate creating code
1028 # for dependent modules/Libraries
1029 # @param CreateDepModuleMakeFile Flag used to indicate creating makefile
1030 # for dependent modules/Libraries
1032 def _Build(self
, Target
, AutoGenObject
, CreateDepsCodeFile
=True, CreateDepsMakeFile
=True, BuildModule
=False):
1033 if AutoGenObject
== None:
1036 # skip file generation for cleanxxx targets, run and fds target
1037 if Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1038 # for target which must generate AutoGen code and makefile
1039 if not self
.SkipAutoGen
or Target
== 'genc':
1040 self
.Progress
.Start("Generating code")
1041 AutoGenObject
.CreateCodeFile(CreateDepsCodeFile
)
1042 self
.Progress
.Stop("done!")
1043 if Target
== "genc":
1046 if not self
.SkipAutoGen
or Target
== 'genmake':
1047 self
.Progress
.Start("Generating makefile")
1048 AutoGenObject
.CreateMakeFile(CreateDepsMakeFile
)
1049 #AutoGenObject.CreateAsBuiltInf()
1050 self
.Progress
.Stop("done!")
1051 if Target
== "genmake":
1054 # always recreate top/platform makefile when clean, just in case of inconsistency
1055 AutoGenObject
.CreateCodeFile(False)
1056 AutoGenObject
.CreateMakeFile(False)
1058 if EdkLogger
.GetLevel() == EdkLogger
.QUIET
:
1059 EdkLogger
.quiet("Building ... %s" % repr(AutoGenObject
))
1061 BuildCommand
= AutoGenObject
.BuildCommand
1062 if BuildCommand
== None or len(BuildCommand
) == 0:
1063 EdkLogger
.error("build", OPTION_MISSING
,
1064 "No build command found for this module. "
1065 "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
1066 (AutoGenObject
.BuildTarget
, AutoGenObject
.ToolChain
, AutoGenObject
.Arch
),
1067 ExtraData
=str(AutoGenObject
))
1072 BuildCommand
= BuildCommand
+ [Target
]
1073 LaunchCommand(BuildCommand
, AutoGenObject
.MakeFileDir
)
1074 self
.CreateAsBuiltInf()
1079 LaunchCommand(AutoGenObject
.GenFdsCommand
, AutoGenObject
.MakeFileDir
)
1084 RunDir
= os
.path
.normpath(os
.path
.join(AutoGenObject
.BuildDir
, GlobalData
.gGlobalDefines
['ARCH']))
1085 Command
= '.\SecMain'
1087 LaunchCommand(Command
, RunDir
)
1091 if Target
== 'libraries':
1098 if Target
== 'cleanall':
1100 #os.rmdir(AutoGenObject.BuildDir)
1101 RemoveDirectory(AutoGenObject
.BuildDir
, True)
1102 except WindowsError, X
:
1103 EdkLogger
.error("build", FILE_DELETE_FAILURE
, ExtraData
=str(X
))
1106 ## Rebase module image and Get function address for the input module list.
1108 def _RebaseModule (self
, MapBuffer
, BaseAddress
, ModuleList
, AddrIsOffset
= True, ModeIsSmm
= False):
1110 AddrIsOffset
= False
1111 InfFileNameList
= ModuleList
.keys()
1112 #InfFileNameList.sort()
1113 for InfFile
in InfFileNameList
:
1114 sys
.stdout
.write (".")
1116 ModuleInfo
= ModuleList
[InfFile
]
1117 ModuleName
= ModuleInfo
.BaseName
1118 ModuleOutputImage
= ModuleInfo
.Image
.FileName
1119 ModuleDebugImage
= os
.path
.join(ModuleInfo
.DebugDir
, ModuleInfo
.BaseName
+ '.efi')
1120 ## for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1122 BaseAddress
= BaseAddress
- ModuleInfo
.Image
.Size
1124 # Update Image to new BaseAddress by GenFw tool
1126 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
1127 LaunchCommand(["GenFw", "--rebase", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
1130 # Set new address to the section header only for SMM driver.
1132 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleOutputImage
], ModuleInfo
.OutputDir
)
1133 LaunchCommand(["GenFw", "--address", str(BaseAddress
), "-r", ModuleDebugImage
], ModuleInfo
.DebugDir
)
1135 # Collect funtion address from Map file
1137 ImageMapTable
= ModuleOutputImage
.replace('.efi', '.map')
1139 if os
.path
.exists(ImageMapTable
):
1140 OrigImageBaseAddress
= 0
1141 ImageMap
= open(ImageMapTable
, 'r')
1142 for LinStr
in ImageMap
:
1143 if len (LinStr
.strip()) == 0:
1146 # Get the preferred address set on link time.
1148 if LinStr
.find ('Preferred load address is') != -1:
1149 StrList
= LinStr
.split()
1150 OrigImageBaseAddress
= int (StrList
[len(StrList
) - 1], 16)
1152 StrList
= LinStr
.split()
1153 if len (StrList
) > 4:
1154 if StrList
[3] == 'f' or StrList
[3] == 'F':
1156 RelativeAddress
= int (StrList
[2], 16) - OrigImageBaseAddress
1157 FunctionList
.append ((Name
, RelativeAddress
))
1158 if ModuleInfo
.Arch
== 'IPF' and Name
.endswith('_ModuleEntryPoint'):
1160 # Get the real entry point address for IPF image.
1162 ModuleInfo
.Image
.EntryPoint
= RelativeAddress
1165 # Add general information.
1168 MapBuffer
.write('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
1170 MapBuffer
.write('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName
, 0 - BaseAddress
, 0 - (BaseAddress
+ ModuleInfo
.Image
.EntryPoint
)))
1172 MapBuffer
.write('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName
, BaseAddress
, BaseAddress
+ ModuleInfo
.Image
.EntryPoint
))
1174 # Add guid and general seciton section.
1176 TextSectionAddress
= 0
1177 DataSectionAddress
= 0
1178 for SectionHeader
in ModuleInfo
.Image
.SectionHeaderList
:
1179 if SectionHeader
[0] == '.text':
1180 TextSectionAddress
= SectionHeader
[1]
1181 elif SectionHeader
[0] in ['.data', '.sdata']:
1182 DataSectionAddress
= SectionHeader
[1]
1184 MapBuffer
.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo
.Guid
, 0 - (BaseAddress
+ TextSectionAddress
), 0 - (BaseAddress
+ DataSectionAddress
)))
1186 MapBuffer
.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo
.Guid
, BaseAddress
+ TextSectionAddress
, BaseAddress
+ DataSectionAddress
))
1188 # Add debug image full path.
1190 MapBuffer
.write('(IMAGE=%s)\n\n' % (ModuleDebugImage
))
1192 # Add funtion address
1194 for Function
in FunctionList
:
1196 MapBuffer
.write(' -0x%010X %s\n' % (0 - (BaseAddress
+ Function
[1]), Function
[0]))
1198 MapBuffer
.write(' 0x%010X %s\n' % (BaseAddress
+ Function
[1], Function
[0]))
1202 # for SMM module in SMRAM, the SMRAM will be allocated from base to top.
1205 BaseAddress
= BaseAddress
+ ModuleInfo
.Image
.Size
1207 ## Collect MAP information of all FVs
1209 def _CollectFvMapBuffer (self
, MapBuffer
, Wa
, ModuleList
):
1211 # First get the XIP base address for FV map file.
1212 GuidPattern
= re
.compile("[-a-fA-F0-9]+")
1213 GuidName
= re
.compile("\(GUID=[-a-fA-F0-9]+")
1214 for FvName
in Wa
.FdfProfile
.FvDict
.keys():
1215 FvMapBuffer
= os
.path
.join(Wa
.FvDir
, FvName
+ '.Fv.map')
1216 if not os
.path
.exists(FvMapBuffer
):
1218 FvMap
= open(FvMapBuffer
, 'r')
1219 #skip FV size information
1225 MatchGuid
= GuidPattern
.match(Line
)
1226 if MatchGuid
!= None:
1228 # Replace GUID with module name
1230 GuidString
= MatchGuid
.group()
1231 if GuidString
.upper() in ModuleList
:
1232 Line
= Line
.replace(GuidString
, ModuleList
[GuidString
.upper()].Name
)
1233 MapBuffer
.write('%s' % (Line
))
1235 # Add the debug image full path.
1237 MatchGuid
= GuidName
.match(Line
)
1238 if MatchGuid
!= None:
1239 GuidString
= MatchGuid
.group().split("=")[1]
1240 if GuidString
.upper() in ModuleList
:
1241 MapBuffer
.write('(IMAGE=%s)\n' % (os
.path
.join(ModuleList
[GuidString
.upper()].DebugDir
, ModuleList
[GuidString
.upper()].Name
+ '.efi')))
1245 ## Collect MAP information of all modules
1247 def _CollectModuleMapBuffer (self
, MapBuffer
, ModuleList
):
1248 sys
.stdout
.write ("Generate Load Module At Fix Address Map")
1250 PatchEfiImageList
= []
1258 # reserve 4K size in SMRAM to make SMM module address not from 0.
1260 IsIpfPlatform
= False
1261 if 'IPF' in self
.ArchList
:
1262 IsIpfPlatform
= True
1263 for ModuleGuid
in ModuleList
:
1264 Module
= ModuleList
[ModuleGuid
]
1265 GlobalData
.gProcessingFile
= "%s [%s, %s, %s]" % (Module
.MetaFile
, Module
.Arch
, Module
.ToolChain
, Module
.BuildTarget
)
1267 OutputImageFile
= ''
1268 for ResultFile
in Module
.CodaTargetList
:
1269 if str(ResultFile
.Target
).endswith('.efi'):
1271 # module list for PEI, DXE, RUNTIME and SMM
1273 OutputImageFile
= os
.path
.join(Module
.OutputDir
, Module
.Name
+ '.efi')
1274 ImageClass
= PeImageClass (OutputImageFile
)
1275 if not ImageClass
.IsValid
:
1276 EdkLogger
.error("build", FILE_PARSE_FAILURE
, ExtraData
=ImageClass
.ErrorInfo
)
1277 ImageInfo
= PeImageInfo(Module
.Name
, Module
.Guid
, Module
.Arch
, Module
.OutputDir
, Module
.DebugDir
, ImageClass
)
1278 if Module
.ModuleType
in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER', 'PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:
1279 PeiModuleList
[Module
.MetaFile
] = ImageInfo
1280 PeiSize
+= ImageInfo
.Image
.Size
1281 elif Module
.ModuleType
in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:
1282 BtModuleList
[Module
.MetaFile
] = ImageInfo
1283 BtSize
+= ImageInfo
.Image
.Size
1284 elif Module
.ModuleType
in ['DXE_RUNTIME_DRIVER', 'RT_DRIVER', 'DXE_SAL_DRIVER', 'SAL_RT_DRIVER']:
1285 RtModuleList
[Module
.MetaFile
] = ImageInfo
1286 #IPF runtime driver needs to be at 2 page alignment.
1287 if IsIpfPlatform
and ImageInfo
.Image
.Size
% 0x2000 != 0:
1288 ImageInfo
.Image
.Size
= (ImageInfo
.Image
.Size
/ 0x2000 + 1) * 0x2000
1289 RtSize
+= ImageInfo
.Image
.Size
1290 elif Module
.ModuleType
in ['SMM_CORE', 'DXE_SMM_DRIVER']:
1291 SmmModuleList
[Module
.MetaFile
] = ImageInfo
1292 SmmSize
+= ImageInfo
.Image
.Size
1293 if Module
.ModuleType
== 'DXE_SMM_DRIVER':
1294 PiSpecVersion
= '0x00000000'
1295 if 'PI_SPECIFICATION_VERSION' in Module
.Module
.Specification
:
1296 PiSpecVersion
= Module
.Module
.Specification
['PI_SPECIFICATION_VERSION']
1297 # for PI specification < PI1.1, DXE_SMM_DRIVER also runs as BOOT time driver.
1298 if int(PiSpecVersion
, 16) < 0x0001000A:
1299 BtModuleList
[Module
.MetaFile
] = ImageInfo
1300 BtSize
+= ImageInfo
.Image
.Size
1303 # EFI image is final target.
1304 # Check EFI image contains patchable FixAddress related PCDs.
1306 if OutputImageFile
!= '':
1307 ModuleIsPatch
= False
1308 for Pcd
in Module
.ModulePcdList
:
1309 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1310 ModuleIsPatch
= True
1312 if not ModuleIsPatch
:
1313 for Pcd
in Module
.LibraryPcdList
:
1314 if Pcd
.Type
== TAB_PCDS_PATCHABLE_IN_MODULE
and Pcd
.TokenCName
in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST
:
1315 ModuleIsPatch
= True
1318 if not ModuleIsPatch
:
1321 # Module includes the patchable load fix address PCDs.
1322 # It will be fixed up later.
1324 PatchEfiImageList
.append (OutputImageFile
)
1327 # Get Top Memory address
1329 ReservedRuntimeMemorySize
= 0
1330 TopMemoryAddress
= 0
1331 if self
.LoadFixAddress
== 0xFFFFFFFFFFFFFFFF:
1332 TopMemoryAddress
= 0
1334 TopMemoryAddress
= self
.LoadFixAddress
1335 if TopMemoryAddress
< RtSize
+ BtSize
+ PeiSize
:
1336 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS is too low to load driver")
1337 # Make IPF runtime driver at 2 page alignment.
1339 ReservedRuntimeMemorySize
= TopMemoryAddress
% 0x2000
1340 RtSize
= RtSize
+ ReservedRuntimeMemorySize
1343 # Patch FixAddress related PCDs into EFI image
1345 for EfiImage
in PatchEfiImageList
:
1346 EfiImageMap
= EfiImage
.replace('.efi', '.map')
1347 if not os
.path
.exists(EfiImageMap
):
1350 # Get PCD offset in EFI image by GenPatchPcdTable function
1352 PcdTable
= parsePcdInfoFromMapFile(EfiImageMap
, EfiImage
)
1354 # Patch real PCD value by PatchPcdValue tool
1356 for PcdInfo
in PcdTable
:
1358 if PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE
:
1359 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE
, str (PeiSize
/ 0x1000))
1360 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE
:
1361 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE
, str (BtSize
/ 0x1000))
1362 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE
:
1363 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE
, str (RtSize
/ 0x1000))
1364 elif PcdInfo
[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE
and len (SmmModuleList
) > 0:
1365 ReturnValue
, ErrorInfo
= PatchBinaryFile (EfiImage
, PcdInfo
[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE
, str (SmmSize
/ 0x1000))
1366 if ReturnValue
!= 0:
1367 EdkLogger
.error("build", PARAMETER_INVALID
, "Patch PCD value failed", ExtraData
=ErrorInfo
)
1369 MapBuffer
.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize
/ 0x1000))
1370 MapBuffer
.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize
/ 0x1000))
1371 MapBuffer
.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize
/ 0x1000))
1372 if len (SmmModuleList
) > 0:
1373 MapBuffer
.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize
/ 0x1000))
1375 PeiBaseAddr
= TopMemoryAddress
- RtSize
- BtSize
1376 BtBaseAddr
= TopMemoryAddress
- RtSize
1377 RtBaseAddr
= TopMemoryAddress
- ReservedRuntimeMemorySize
1379 self
._RebaseModule
(MapBuffer
, PeiBaseAddr
, PeiModuleList
, TopMemoryAddress
== 0)
1380 self
._RebaseModule
(MapBuffer
, BtBaseAddr
, BtModuleList
, TopMemoryAddress
== 0)
1381 self
._RebaseModule
(MapBuffer
, RtBaseAddr
, RtModuleList
, TopMemoryAddress
== 0)
1382 self
._RebaseModule
(MapBuffer
, 0x1000, SmmModuleList
, AddrIsOffset
=False, ModeIsSmm
=True)
1383 MapBuffer
.write('\n\n')
1384 sys
.stdout
.write ("\n")
1387 ## Save platform Map file
1389 def _SaveMapFile (self
, MapBuffer
, Wa
):
1391 # Map file path is got.
1393 MapFilePath
= os
.path
.join(Wa
.BuildDir
, Wa
.Name
+ '.map')
1395 # Save address map into MAP file.
1397 SaveFileOnChange(MapFilePath
, MapBuffer
.getvalue(), False)
1399 if self
.LoadFixAddress
!= 0:
1400 sys
.stdout
.write ("\nLoad Module At Fix Address Map file can be found at %s\n" % (MapFilePath
))
1403 ## Build active platform for different build targets and different tool chains
1405 def _BuildPlatform(self
):
1406 for BuildTarget
in self
.BuildTargetList
:
1407 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1408 for ToolChain
in self
.ToolChainList
:
1409 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1410 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1411 Wa
= WorkspaceAutoGen(
1428 self
.Fdf
= Wa
.FdfFile
1429 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1430 self
.BuildReport
.AddPlatformReport(Wa
)
1431 self
.Progress
.Stop("done!")
1432 for Arch
in Wa
.ArchList
:
1433 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1434 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1435 for Module
in Pa
.Platform
.Modules
:
1436 # Get ModuleAutoGen object to generate C code file and makefile
1437 Ma
= ModuleAutoGen(Wa
, Module
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1440 self
.BuildModules
.append(Ma
)
1441 self
._BuildPa
(self
.Target
, Pa
)
1443 # Create MAP file when Load Fix Address is enabled.
1444 if self
.Target
in ["", "all", "fds"]:
1445 for Arch
in Wa
.ArchList
:
1446 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1448 # Check whether the set fix address is above 4G for 32bit image.
1450 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1451 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platform with IA32 or ARM arch modules")
1456 for Pa
in Wa
.AutoGenObjectList
:
1457 for Ma
in Pa
.ModuleAutoGenList
:
1460 if not Ma
.IsLibrary
:
1461 ModuleList
[Ma
.Guid
.upper()] = Ma
1463 MapBuffer
= StringIO('')
1464 if self
.LoadFixAddress
!= 0:
1466 # Rebase module to the preferred memory address before GenFds
1468 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1471 # create FDS again for the updated EFI image
1473 self
._Build
("fds", Wa
)
1475 # Create MAP file for all platform FVs after GenFds.
1477 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1479 # Save MAP buffer into MAP file.
1481 self
._SaveMapFile
(MapBuffer
, Wa
)
1483 ## Build active module for different build targets, different tool chains and different archs
1485 def _BuildModule(self
):
1486 for BuildTarget
in self
.BuildTargetList
:
1487 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1488 for ToolChain
in self
.ToolChainList
:
1489 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1490 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1492 # module build needs platform build information, so get platform
1495 Wa
= WorkspaceAutoGen(
1513 self
.Fdf
= Wa
.FdfFile
1514 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1515 Wa
.CreateMakeFile(False)
1516 self
.Progress
.Stop("done!")
1518 for Arch
in Wa
.ArchList
:
1519 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1520 Ma
= ModuleAutoGen(Wa
, self
.ModuleFile
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1521 if Ma
== None: continue
1523 self
.BuildModules
.append(Ma
)
1524 if not Ma
.IsBinaryModule
:
1525 self
._Build
(self
.Target
, Ma
, BuildModule
=True)
1527 self
.BuildReport
.AddPlatformReport(Wa
, MaList
)
1532 "Module for [%s] is not a component of active platform."\
1533 " Please make sure that the ARCH and inf file path are"\
1534 " given in the same as in [%s]" % \
1535 (', '.join(Wa
.ArchList
), self
.PlatformFile
),
1536 ExtraData
=self
.ModuleFile
1538 # Create MAP file when Load Fix Address is enabled.
1539 if self
.Target
== "fds" and self
.Fdf
:
1540 for Arch
in Wa
.ArchList
:
1542 # Check whether the set fix address is above 4G for 32bit image.
1544 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1545 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1550 for Pa
in Wa
.AutoGenObjectList
:
1551 for Ma
in Pa
.ModuleAutoGenList
:
1554 if not Ma
.IsLibrary
:
1555 ModuleList
[Ma
.Guid
.upper()] = Ma
1557 MapBuffer
= StringIO('')
1558 if self
.LoadFixAddress
!= 0:
1560 # Rebase module to the preferred memory address before GenFds
1562 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1564 # create FDS again for the updated EFI image
1566 self
._Build
("fds", Wa
)
1568 # Create MAP file for all platform FVs after GenFds.
1570 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1572 # Save MAP buffer into MAP file.
1574 self
._SaveMapFile
(MapBuffer
, Wa
)
1576 ## Build a platform in multi-thread mode
1578 def _MultiThreadBuildPlatform(self
):
1579 for BuildTarget
in self
.BuildTargetList
:
1580 GlobalData
.gGlobalDefines
['TARGET'] = BuildTarget
1581 for ToolChain
in self
.ToolChainList
:
1582 GlobalData
.gGlobalDefines
['TOOLCHAIN'] = ToolChain
1583 GlobalData
.gGlobalDefines
['TOOL_CHAIN_TAG'] = ToolChain
1584 Wa
= WorkspaceAutoGen(
1601 self
.Fdf
= Wa
.FdfFile
1602 self
.LoadFixAddress
= Wa
.Platform
.LoadFixAddress
1603 self
.BuildReport
.AddPlatformReport(Wa
)
1604 Wa
.CreateMakeFile(False)
1606 # multi-thread exit flag
1607 ExitFlag
= threading
.Event()
1609 for Arch
in Wa
.ArchList
:
1610 GlobalData
.gGlobalDefines
['ARCH'] = Arch
1611 Pa
= PlatformAutoGen(Wa
, self
.PlatformFile
, BuildTarget
, ToolChain
, Arch
)
1615 for Inf
in Pa
.Platform
.Modules
:
1616 ModuleList
.append(Inf
)
1617 # Add the INF only list in FDF
1618 if GlobalData
.gFdfParser
!= None:
1619 for InfName
in GlobalData
.gFdfParser
.Profile
.InfList
:
1620 Inf
= PathClass(NormPath(InfName
), self
.WorkspaceDir
, Arch
)
1621 if Inf
in Pa
.Platform
.Modules
:
1623 ModuleList
.append(Inf
)
1624 for Module
in ModuleList
:
1625 # Get ModuleAutoGen object to generate C code file and makefile
1626 Ma
= ModuleAutoGen(Wa
, Module
, BuildTarget
, ToolChain
, Arch
, self
.PlatformFile
)
1630 # Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'
1631 if self
.Target
not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
1632 # for target which must generate AutoGen code and makefile
1633 if not self
.SkipAutoGen
or self
.Target
== 'genc':
1634 Ma
.CreateCodeFile(True)
1635 if self
.Target
== "genc":
1638 if not self
.SkipAutoGen
or self
.Target
== 'genmake':
1639 Ma
.CreateMakeFile(True)
1640 if self
.Target
== "genmake":
1642 self
.BuildModules
.append(Ma
)
1643 self
.Progress
.Stop("done!")
1645 for Ma
in self
.BuildModules
:
1646 # Generate build task for the module
1647 if not Ma
.IsBinaryModule
:
1648 Bt
= BuildTask
.New(ModuleMakeUnit(Ma
, self
.Target
))
1649 # Break build if any build thread has error
1650 if BuildTask
.HasError():
1651 # we need a full version of makefile for platform
1653 BuildTask
.WaitForComplete()
1654 Pa
.CreateMakeFile(False)
1655 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1656 # Start task scheduler
1657 if not BuildTask
.IsOnGoing():
1658 BuildTask
.StartScheduler(self
.ThreadNumber
, ExitFlag
)
1660 # in case there's an interruption. we need a full version of makefile for platform
1661 Pa
.CreateMakeFile(False)
1662 if BuildTask
.HasError():
1663 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1666 # Save temp tables to a TmpTableDict.
1668 for Key
in Wa
.BuildDatabase
._CACHE
_:
1669 if Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
and Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
:
1670 if TemporaryTablePattern
.match(Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
):
1671 TmpTableDict
[Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Table
] = Wa
.BuildDatabase
._CACHE
_[Key
]._RawData
._Table
.Cur
1674 # All modules have been put in build tasks queue. Tell task scheduler
1675 # to exit if all tasks are completed
1678 BuildTask
.WaitForComplete()
1679 self
.CreateAsBuiltInf()
1682 # Check for build error, and raise exception if one
1683 # has been signaled.
1685 if BuildTask
.HasError():
1686 EdkLogger
.error("build", BUILD_ERROR
, "Failed to build module", ExtraData
=GlobalData
.gBuildingModule
)
1688 # Create MAP file when Load Fix Address is enabled.
1689 if self
.Target
in ["", "all", "fds"]:
1690 for Arch
in Wa
.ArchList
:
1692 # Check whether the set fix address is above 4G for 32bit image.
1694 if (Arch
== 'IA32' or Arch
== 'ARM') and self
.LoadFixAddress
!= 0xFFFFFFFFFFFFFFFF and self
.LoadFixAddress
>= 0x100000000:
1695 EdkLogger
.error("build", PARAMETER_INVALID
, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
1700 for Pa
in Wa
.AutoGenObjectList
:
1701 for Ma
in Pa
.ModuleAutoGenList
:
1704 if not Ma
.IsLibrary
:
1705 ModuleList
[Ma
.Guid
.upper()] = Ma
1707 # Rebase module to the preferred memory address before GenFds
1709 MapBuffer
= StringIO('')
1710 if self
.LoadFixAddress
!= 0:
1711 self
._CollectModuleMapBuffer
(MapBuffer
, ModuleList
)
1715 # Generate FD image if there's a FDF file found
1717 LaunchCommand(Wa
.GenFdsCommand
, os
.getcwd())
1720 # Create MAP file for all platform FVs after GenFds.
1722 self
._CollectFvMapBuffer
(MapBuffer
, Wa
, ModuleList
)
1724 # Save MAP buffer into MAP file.
1726 self
._SaveMapFile
(MapBuffer
, Wa
)
1728 ## Generate GuidedSectionTools.txt in the FV directories.
1730 def CreateGuidedSectionToolsFile(self
):
1731 for BuildTarget
in self
.BuildTargetList
:
1732 for ToolChain
in self
.ToolChainList
:
1733 Wa
= WorkspaceAutoGen(
1750 if not os
.path
.exists(FvDir
):
1753 for Arch
in self
.ArchList
:
1754 # Build up the list of supported architectures for this build
1755 prefix
= '%s_%s_%s_' % (BuildTarget
, ToolChain
, Arch
)
1757 # Look through the tool definitions for GUIDed tools
1759 for (attrib
, value
) in self
.ToolDef
.ToolsDefTxtDictionary
.iteritems():
1760 if attrib
.upper().endswith('_GUID'):
1761 split
= attrib
.split('_')
1762 thisPrefix
= '_'.join(split
[0:3]) + '_'
1763 if thisPrefix
== prefix
:
1764 guid
= self
.ToolDef
.ToolsDefTxtDictionary
[attrib
]
1767 path
= '_'.join(split
[0:4]) + '_PATH'
1768 path
= self
.ToolDef
.ToolsDefTxtDictionary
[path
]
1769 path
= self
.GetFullPathOfTool(path
)
1770 guidAttribs
.append((guid
, toolName
, path
))
1772 # Write out GuidedSecTools.txt
1773 toolsFile
= os
.path
.join(FvDir
, 'GuidedSectionTools.txt')
1774 toolsFile
= open(toolsFile
, 'wt')
1775 for guidedSectionTool
in guidAttribs
:
1776 print >> toolsFile
, ' '.join(guidedSectionTool
)
1779 ## Returns the full path of the tool.
1781 def GetFullPathOfTool (self
, tool
):
1782 if os
.path
.exists(tool
):
1783 return os
.path
.realpath(tool
)
1785 # We need to search for the tool using the
1786 # PATH environment variable.
1787 for dirInPath
in os
.environ
['PATH'].split(os
.pathsep
):
1788 foundPath
= os
.path
.join(dirInPath
, tool
)
1789 if os
.path
.exists(foundPath
):
1790 return os
.path
.realpath(foundPath
)
1792 # If the tool was not found in the path then we just return
1796 ## Launch the module or platform build
1799 if not self
.ModuleFile
:
1800 if not self
.SpawnMode
or self
.Target
not in ["", "all"]:
1801 self
.SpawnMode
= False
1802 self
._BuildPlatform
()
1804 self
._MultiThreadBuildPlatform
()
1805 self
.CreateGuidedSectionToolsFile()
1807 self
.SpawnMode
= False
1810 if self
.Target
== 'cleanall':
1812 RemoveDirectory(os
.path
.dirname(GlobalData
.gDatabasePath
), True)
1814 def CreateAsBuiltInf(self
):
1815 for Module
in self
.BuildModules
:
1816 Module
.CreateAsBuiltInf()
1817 self
.BuildModules
= []
1818 ## Do some clean-up works when error occurred
1819 def Relinquish(self
):
1820 OldLogLevel
= EdkLogger
.GetLevel()
1821 EdkLogger
.SetLevel(EdkLogger
.ERROR
)
1822 #self.DumpBuildData()
1823 Utils
.Progressor
.Abort()
1824 if self
.SpawnMode
== True:
1826 EdkLogger
.SetLevel(OldLogLevel
)
1828 def DumpBuildData(self
):
1829 CacheDirectory
= os
.path
.dirname(GlobalData
.gDatabasePath
)
1830 Utils
.CreateDirectory(CacheDirectory
)
1831 Utils
.DataDump(Utils
.gFileTimeStampCache
, os
.path
.join(CacheDirectory
, "gFileTimeStampCache"))
1832 Utils
.DataDump(Utils
.gDependencyDatabase
, os
.path
.join(CacheDirectory
, "gDependencyDatabase"))
1834 def RestoreBuildData(self
):
1835 FilePath
= os
.path
.join(os
.path
.dirname(GlobalData
.gDatabasePath
), "gFileTimeStampCache")
1836 if Utils
.gFileTimeStampCache
== {} and os
.path
.isfile(FilePath
):
1837 Utils
.gFileTimeStampCache
= Utils
.DataRestore(FilePath
)
1838 if Utils
.gFileTimeStampCache
== None:
1839 Utils
.gFileTimeStampCache
= {}
1841 FilePath
= os
.path
.join(os
.path
.dirname(GlobalData
.gDatabasePath
), "gDependencyDatabase")
1842 if Utils
.gDependencyDatabase
== {} and os
.path
.isfile(FilePath
):
1843 Utils
.gDependencyDatabase
= Utils
.DataRestore(FilePath
)
1844 if Utils
.gDependencyDatabase
== None:
1845 Utils
.gDependencyDatabase
= {}
1847 def ParseDefines(DefineList
=[]):
1849 if DefineList
!= None:
1850 for Define
in DefineList
:
1851 DefineTokenList
= Define
.split("=", 1)
1852 if not GlobalData
.gMacroNamePattern
.match(DefineTokenList
[0]):
1853 EdkLogger
.error('build', FORMAT_INVALID
,
1854 "The macro name must be in the pattern [A-Z][A-Z0-9_]*",
1855 ExtraData
=DefineTokenList
[0])
1857 if len(DefineTokenList
) == 1:
1858 DefineDict
[DefineTokenList
[0]] = "TRUE"
1860 DefineDict
[DefineTokenList
[0]] = DefineTokenList
[1].strip()
1864 def SingleCheckCallback(option
, opt_str
, value
, parser
):
1865 if option
not in gParamCheck
:
1866 setattr(parser
.values
, option
.dest
, value
)
1867 gParamCheck
.append(option
)
1869 parser
.error("Option %s only allows one instance in command line!" % option
)
1871 ## Parse command line options
1873 # Using standard Python module optparse to parse command line option of this tool.
1875 # @retval Opt A optparse.Values object containing the parsed options
1876 # @retval Args Target of build command
1878 def MyOptionParser():
1879 Parser
= OptionParser(description
=__copyright__
, version
=__version__
, prog
="build.exe", usage
="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")
1880 Parser
.add_option("-a", "--arch", action
="append", type="choice", choices
=['IA32', 'X64', 'IPF', 'EBC', 'ARM', 'AARCH64'], dest
="TargetArch",
1881 help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")
1882 Parser
.add_option("-p", "--platform", action
="callback", type="string", dest
="PlatformFile", callback
=SingleCheckCallback
,
1883 help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")
1884 Parser
.add_option("-m", "--module", action
="callback", type="string", dest
="ModuleFile", callback
=SingleCheckCallback
,
1885 help="Build the module specified by the INF file name argument.")
1886 Parser
.add_option("-b", "--buildtarget", type="string", dest
="BuildTarget", help="Using the TARGET to build the platform, overriding target.txt's TARGET definition.",
1888 Parser
.add_option("-t", "--tagname", action
="append", type="string", dest
="ToolChain",
1889 help="Using the Tool Chain Tagname to build the platform, overriding target.txt's TOOL_CHAIN_TAG definition.")
1890 Parser
.add_option("-x", "--sku-id", action
="callback", type="string", dest
="SkuId", callback
=SingleCheckCallback
,
1891 help="Using this name of SKU ID to build the platform, overriding SKUID_IDENTIFIER in DSC file.")
1893 Parser
.add_option("-n", action
="callback", type="int", dest
="ThreadNumber", callback
=SingleCheckCallback
,
1894 help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. Less than 2 will disable multi-thread builds.")
1896 Parser
.add_option("-f", "--fdf", action
="callback", type="string", dest
="FdfFile", callback
=SingleCheckCallback
,
1897 help="The name of the FDF file to use, which overrides the setting in the DSC file.")
1898 Parser
.add_option("-r", "--rom-image", action
="append", type="string", dest
="RomImage", default
=[],
1899 help="The name of FD to be generated. The name must be from [FD] section in FDF file.")
1900 Parser
.add_option("-i", "--fv-image", action
="append", type="string", dest
="FvImage", default
=[],
1901 help="The name of FV to be generated. The name must be from [FV] section in FDF file.")
1902 Parser
.add_option("-C", "--capsule-image", action
="append", type="string", dest
="CapName", default
=[],
1903 help="The name of Capsule to be generated. The name must be from [Capsule] section in FDF file.")
1904 Parser
.add_option("-u", "--skip-autogen", action
="store_true", dest
="SkipAutoGen", help="Skip AutoGen step.")
1905 Parser
.add_option("-e", "--re-parse", action
="store_true", dest
="Reparse", help="Re-parse all meta-data files.")
1907 Parser
.add_option("-c", "--case-insensitive", action
="store_true", dest
="CaseInsensitive", default
=False, help="Don't check case of file name.")
1909 Parser
.add_option("-w", "--warning-as-error", action
="store_true", dest
="WarningAsError", help="Treat warning in tools as error.")
1910 Parser
.add_option("-j", "--log", action
="store", dest
="LogFile", help="Put log in specified file as well as on console.")
1912 Parser
.add_option("-s", "--silent", action
="store_true", type=None, dest
="SilentMode",
1913 help="Make use of silent mode of (n)make.")
1914 Parser
.add_option("-q", "--quiet", action
="store_true", type=None, help="Disable all messages except FATAL ERRORS.")
1915 Parser
.add_option("-v", "--verbose", action
="store_true", type=None, help="Turn on verbose output with informational messages printed, "\
1916 "including library instances selected, final dependency expression, "\
1917 "and warning messages, etc.")
1918 Parser
.add_option("-d", "--debug", action
="store", type="int", help="Enable debug messages at specified level.")
1919 Parser
.add_option("-D", "--define", action
="append", type="string", dest
="Macros", help="Macro: \"Name [= Value]\".")
1921 Parser
.add_option("-y", "--report-file", action
="store", dest
="ReportFile", help="Create/overwrite the report to the specified filename.")
1922 Parser
.add_option("-Y", "--report-type", action
="append", type="choice", choices
=['PCD', 'LIBRARY', 'FLASH', 'DEPEX', 'BUILD_FLAGS', 'FIXED_ADDRESS', 'EXECUTION_ORDER'], dest
="ReportType", default
=[],
1923 help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, EXECUTION_ORDER]. "\
1924 "To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")
1925 Parser
.add_option("-F", "--flag", action
="store", type="string", dest
="Flag",
1926 help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\
1927 "This option can also be specified by setting *_*_*_BUILD_FLAGS in [BuildOptions] section of platform DSC. If they are both specified, this value "\
1928 "will override the setting in [BuildOptions] section of platform DSC.")
1929 Parser
.add_option("-N", "--no-cache", action
="store_true", dest
="DisableCache", default
=False, help="Disable build cache mechanism")
1930 Parser
.add_option("--conf", action
="store", type="string", dest
="ConfDirectory", help="Specify the customized Conf directory.")
1931 Parser
.add_option("--check-usage", action
="store_true", dest
="CheckUsage", default
=False, help="Check usage content of entries listed in INF file.")
1932 Parser
.add_option("--ignore-sources", action
="store_true", dest
="IgnoreSources", default
=False, help="Focus to a binary build and ignore all source files")
1933 Parser
.add_option("--pcd", action
="append", dest
="OptionPcd", help="Set PCD value by command line. Format: 'PcdName=Value' ")
1935 (Opt
, Args
) = Parser
.parse_args()
1938 ## Tool entrance method
1940 # This method mainly dispatch specific methods per the command line options.
1941 # If no error found, return zero value so the caller of this tool can know
1942 # if it's executed successfully or not.
1944 # @retval 0 Tool was successful
1945 # @retval 1 Tool failed
1948 StartTime
= time
.time()
1950 # Initialize log system
1951 EdkLogger
.Initialize()
1954 # Parse the options and args
1956 (Option
, Target
) = MyOptionParser()
1957 GlobalData
.gOptions
= Option
1958 GlobalData
.gCaseInsensitive
= Option
.CaseInsensitive
1961 if Option
.verbose
!= None:
1962 EdkLogger
.SetLevel(EdkLogger
.VERBOSE
)
1963 elif Option
.quiet
!= None:
1964 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
1965 elif Option
.debug
!= None:
1966 EdkLogger
.SetLevel(Option
.debug
+ 1)
1968 EdkLogger
.SetLevel(EdkLogger
.INFO
)
1970 if Option
.LogFile
!= None:
1971 EdkLogger
.SetLogFile(Option
.LogFile
)
1973 if Option
.WarningAsError
== True:
1974 EdkLogger
.SetWarningAsError()
1976 if platform
.platform().find("Windows") >= 0:
1977 GlobalData
.gIsWindows
= True
1979 GlobalData
.gIsWindows
= False
1981 EdkLogger
.quiet("Build environment: %s" % platform
.platform())
1982 EdkLogger
.quiet(time
.strftime("Build start time: %H:%M:%S, %b.%d %Y\n", time
.localtime()));
1987 if len(Target
) == 0:
1989 elif len(Target
) >= 2:
1990 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "More than one targets are not supported.",
1991 ExtraData
="Please select one of: %s" % (' '.join(gSupportedTarget
)))
1993 Target
= Target
[0].lower()
1995 if Target
not in gSupportedTarget
:
1996 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "Not supported target [%s]." % Target
,
1997 ExtraData
="Please select one of: %s" % (' '.join(gSupportedTarget
)))
2000 # Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH
2003 GlobalData
.gCommandLineDefines
.update(ParseDefines(Option
.Macros
))
2005 Workspace
= os
.getenv("WORKSPACE")
2007 # Get files real name in workspace dir
2009 GlobalData
.gAllFiles
= Utils
.DirCache(Workspace
)
2011 WorkingDirectory
= os
.getcwd()
2012 if not Option
.ModuleFile
:
2013 FileList
= glob
.glob(os
.path
.normpath(os
.path
.join(WorkingDirectory
, '*.inf')))
2014 FileNum
= len(FileList
)
2016 EdkLogger
.error("build", OPTION_NOT_SUPPORTED
, "There are %d INF files in %s." % (FileNum
, WorkingDirectory
),
2017 ExtraData
="Please use '-m <INF_FILE_PATH>' switch to choose one.")
2019 Option
.ModuleFile
= NormFile(FileList
[0], Workspace
)
2021 if Option
.ModuleFile
:
2022 if os
.path
.isabs (Option
.ModuleFile
):
2023 if os
.path
.normcase (os
.path
.normpath(Option
.ModuleFile
)).find (Workspace
) == 0:
2024 Option
.ModuleFile
= NormFile(os
.path
.normpath(Option
.ModuleFile
), Workspace
)
2025 Option
.ModuleFile
= PathClass(Option
.ModuleFile
, Workspace
)
2026 ErrorCode
, ErrorInfo
= Option
.ModuleFile
.Validate(".inf", False)
2028 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
2030 if Option
.PlatformFile
!= None:
2031 if os
.path
.isabs (Option
.PlatformFile
):
2032 if os
.path
.normcase (os
.path
.normpath(Option
.PlatformFile
)).find (Workspace
) == 0:
2033 Option
.PlatformFile
= NormFile(os
.path
.normpath(Option
.PlatformFile
), Workspace
)
2034 Option
.PlatformFile
= PathClass(Option
.PlatformFile
, Workspace
)
2036 if Option
.FdfFile
!= None:
2037 if os
.path
.isabs (Option
.FdfFile
):
2038 if os
.path
.normcase (os
.path
.normpath(Option
.FdfFile
)).find (Workspace
) == 0:
2039 Option
.FdfFile
= NormFile(os
.path
.normpath(Option
.FdfFile
), Workspace
)
2040 Option
.FdfFile
= PathClass(Option
.FdfFile
, Workspace
)
2041 ErrorCode
, ErrorInfo
= Option
.FdfFile
.Validate(".fdf", False)
2043 EdkLogger
.error("build", ErrorCode
, ExtraData
=ErrorInfo
)
2045 if Option
.Flag
!= None and Option
.Flag
not in ['-c', '-s']:
2046 EdkLogger
.error("build", OPTION_VALUE_INVALID
, "UNI flag must be one of -c or -s")
2048 MyBuild
= Build(Target
, Workspace
, Option
)
2049 GlobalData
.gCommandLineDefines
['ARCH'] = ' '.join(MyBuild
.ArchList
)
2051 # Drop temp tables to avoid database locked.
2052 for TmpTableName
in TmpTableDict
:
2053 SqlCommand
= """drop table IF EXISTS %s""" % TmpTableName
2054 TmpTableDict
[TmpTableName
].execute(SqlCommand
)
2055 #MyBuild.DumpBuildData()
2057 # All job done, no error found and no exception raised
2060 except FatalError
, X
:
2062 # for multi-thread build exits safely
2063 MyBuild
.Relinquish()
2064 if Option
!= None and Option
.debug
!= None:
2065 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2066 ReturnCode
= X
.args
[0]
2068 # error from Fdf parser
2070 # for multi-thread build exits safely
2071 MyBuild
.Relinquish()
2072 if Option
!= None and Option
.debug
!= None:
2073 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2075 EdkLogger
.error(X
.ToolName
, FORMAT_INVALID
, File
=X
.FileName
, Line
=X
.LineNumber
, ExtraData
=X
.Message
, RaiseError
=False)
2076 ReturnCode
= FORMAT_INVALID
2077 except KeyboardInterrupt:
2078 ReturnCode
= ABORT_ERROR
2079 if Option
!= None and Option
.debug
!= None:
2080 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2083 # for multi-thread build exits safely
2084 MyBuild
.Relinquish()
2086 # try to get the meta-file from the object causing exception
2087 Tb
= sys
.exc_info()[-1]
2088 MetaFile
= GlobalData
.gProcessingFile
2090 if 'self' in Tb
.tb_frame
.f_locals
and hasattr(Tb
.tb_frame
.f_locals
['self'], 'MetaFile'):
2091 MetaFile
= Tb
.tb_frame
.f_locals
['self'].MetaFile
2096 "Unknown fatal error when processing [%s]" % MetaFile
,
2097 ExtraData
="\n(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)\n",
2100 EdkLogger
.quiet("(Python %s on %s) " % (platform
.python_version(), sys
.platform
) + traceback
.format_exc())
2101 ReturnCode
= CODE_ERROR
2103 Utils
.Progressor
.Abort()
2104 Utils
.ClearDuplicatedInf()
2108 elif ReturnCode
== ABORT_ERROR
:
2109 Conclusion
= "Aborted"
2111 Conclusion
= "Failed"
2112 FinishTime
= time
.time()
2113 BuildDuration
= time
.gmtime(int(round(FinishTime
- StartTime
)))
2114 BuildDurationStr
= ""
2115 if BuildDuration
.tm_yday
> 1:
2116 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
) + ", %d day(s)" % (BuildDuration
.tm_yday
- 1)
2118 BuildDurationStr
= time
.strftime("%H:%M:%S", BuildDuration
)
2121 MyBuild
.BuildReport
.GenerateReport(BuildDurationStr
)
2123 EdkLogger
.SetLevel(EdkLogger
.QUIET
)
2124 EdkLogger
.quiet("\n- %s -" % Conclusion
)
2125 EdkLogger
.quiet(time
.strftime("Build end time: %H:%M:%S, %b.%d %Y", time
.localtime()))
2126 EdkLogger
.quiet("Build total time: %s\n" % BuildDurationStr
)
2129 if __name__
== '__main__':
2131 ## 0-127 is a safe return range, and 1 is a standard default error
2132 if r
< 0 or r
> 127: r
= 1