BeagleBoardPkg/BeagleBoardPkg-next.fdf

   1 # FLASH layout file for Beagle board.
   2 #
   3 # Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
   4 #
   5 #    This program and the accompanying materials
   6 #    are licensed and made available under the terms and conditions of the BSD License
   7 #    which accompanies this distribution. The full text of the license may be found at
   8 #    http://opensource.org/licenses/bsd-license.php
   9 #
  10 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28
  29 [FD.BeagleBoard_EFI]
  30 BaseAddress   = 0x80008000|gArmTokenSpaceGuid.PcdNormalFdBaseAddress  #The base address of the FLASH Device.
  31 Size          = 0x00080000|gArmTokenSpaceGuid.PcdNormalFdSize         #The size in bytes of the FLASH Device
  32 ErasePolarity = 1
  33 BlockSize     = 0x1
  34 NumBlocks     = 0x80000
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51 !if $(EDK2_SECOND_STAGE_BOOTOLADER) == 1
  52 0x00000000|0x00080000
  53 !else
  54 # 512 bytes of configuration header & 8 bytes of image header
  55 0x00000000|0x00000208
  56
  57 0x00000208|0x0007FDF8
  58 !endif
  59 gArmTokenSpaceGuid.PcdNormalFvBaseAddress|gArmTokenSpaceGuid.PcdNormalFvBaseSize
  60 FV = FVMAIN_COMPACT
  61
  62 ################################################################################
  63 #
  64 # FV Section
  65 #
  66 # [FV] section is used to define what components or modules are placed within a flash
  67 # device file.  This section also defines order the components and modules are positioned
  68 # within the image.  The [FV] section consists of define statements, set statements and
  69 # module statements.
  70 #
  71 ################################################################################
  72
  73 [FV.FvMain]
  74 BlockSize          = 0x1
  75 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  76 FvAlignment        = 8         # FV alignment and FV attributes setting.
  77 ERASE_POLARITY     = 1
  78 MEMORY_MAPPED      = TRUE
  79 STICKY_WRITE       = TRUE
  80 LOCK_CAP           = TRUE
  81 LOCK_STATUS        = TRUE
  82 WRITE_DISABLED_CAP = TRUE
  83 WRITE_ENABLED_CAP  = TRUE
  84 WRITE_STATUS       = TRUE
  85 WRITE_LOCK_CAP     = TRUE
  86 WRITE_LOCK_STATUS  = TRUE
  87 READ_DISABLED_CAP  = TRUE
  88 READ_ENABLED_CAP   = TRUE
  89 READ_STATUS        = TRUE
  90 READ_LOCK_CAP      = TRUE
  91 READ_LOCK_STATUS   = TRUE
  92
  93   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  94
  95   #
  96   # PI DXE Drivers producing Architectural Protocols (EFI Services)
  97   #
  98   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  99
 100   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 101   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 102   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 103   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 104   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 105   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 106
 107   INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
 108
 109   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 110   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 111   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 112
 113   #
 114   # Semi-hosting filesystem
 115   #
 116   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 117
 118   #
 119   # Nand Flash
 120   #
 121   INF Omap35xxPkg/Flash/Flash.inf
 122
 123   #
 124   # MMC/SD
 125   #
 126   INF Omap35xxPkg/MMCHSDxe/MMCHS.inf
 127
 128   #
 129   # I2C
 130   #
 131   INF Omap35xxPkg/SmbusDxe/Smbus.inf
 132
 133   #
 134   # SoC Drivers
 135   #
 136   INF Omap35xxPkg/Gpio/Gpio.inf
 137   INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
 138   INF Omap35xxPkg/TimerDxe/TimerDxe.inf
 139
 140   #
 141   # Power IC
 142   #
 143   INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
 144
 145   #
 146   # FAT filesystem + GPT/MBR partitioning
 147   #
 148   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 149   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 150   INF FatPkg/EnhancedFatDxe/Fat.inf
 151   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 152
 153   #
 154   # USB Support
 155   #
 156
 157   INF Omap35xxPkg/PciEmulation/PciEmulation.inf
 158
 159   #NOTE: Open source EHCI stack doesn't work on Beagleboard.
 160   #NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain.
 161   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 162   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 163   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 164
 165   #
 166   # UEFI application (Shell Embedded Boot Loader)
 167   #
 168   INF EmbeddedPkg/Ebl/Ebl.inf
 169
 170   #
 171   # Bds
 172   #
 173   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 174   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 175   INF ArmPlatformPkg/Bds/Bds.inf
 176
 177
 178
 179 [FV.FVMAIN_COMPACT]
 180 FvAlignment        = 8
 181 ERASE_POLARITY     = 1
 182 MEMORY_MAPPED      = TRUE
 183 STICKY_WRITE       = TRUE
 184 LOCK_CAP           = TRUE
 185 LOCK_STATUS        = TRUE
 186 WRITE_DISABLED_CAP = TRUE
 187 WRITE_ENABLED_CAP  = TRUE
 188 WRITE_STATUS       = TRUE
 189 WRITE_LOCK_CAP     = TRUE
 190 WRITE_LOCK_STATUS  = TRUE
 191 READ_DISABLED_CAP  = TRUE
 192 READ_ENABLED_CAP   = TRUE
 193 READ_STATUS        = TRUE
 194 READ_LOCK_CAP      = TRUE
 195 READ_LOCK_STATUS   = TRUE
 196
 197   INF ArmPlatformPkg/PrePi/PeiUniCore.inf
 198
 199   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 200     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 201       SECTION FV_IMAGE = FVMAIN
 202     }
 203   }
 204
 205
 206 ################################################################################
 207 #
 208 # Rules are use with the [FV] section's module INF type to define
 209 # how an FFS file is created for a given INF file. The following Rule are the default
 210 # rules for the different module type. User can add the customized rules to define the
 211 # content of the FFS file.
 212 #
 213 ################################################################################
 214
 215
 216 ############################################################################
 217 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 218 ############################################################################
 219 #
 220 #[Rule.Common.DXE_DRIVER]
 221 #  FILE DRIVER = $(NAMED_GUID) {
 222 #    DXE_DEPEX    DXE_DEPEX Optional      |.depex
 223 #    COMPRESS PI_STD {
 224 #      GUIDED {
 225 #        PE32     PE32                    |.efi
 226 #        UI       STRING="$(MODULE_NAME)" Optional
 227 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 228 #      }
 229 #    }
 230 #  }
 231 #
 232 ############################################################################
 233
 234 [Rule.Common.SEC]
 235   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 236     TE  TE    Align = 32      |.efi
 237   }
 238
 239 [Rule.Common.PEI_CORE]
 240   FILE PEI_CORE = $(NAMED_GUID) {
 241     TE     TE           |.efi
 242     UI     STRING ="$(MODULE_NAME)" Optional
 243   }
 244
 245 [Rule.Common.PEIM]
 246   FILE PEIM = $(NAMED_GUID) {
 247      PEI_DEPEX PEI_DEPEX Optional        |.depex
 248      PE32      PE32                      |.efi
 249      UI       STRING="$(MODULE_NAME)" Optional
 250   }
 251
 252 [Rule.Common.PEIM.TIANOCOMPRESSED]
 253   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 254     PEI_DEPEX PEI_DEPEX Optional         |.depex
 255     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 256       PE32      PE32                     |.efi
 257       UI        STRING="$(MODULE_NAME)" Optional
 258     }
 259   }
 260
 261 [Rule.Common.DXE_CORE]
 262   FILE DXE_CORE = $(NAMED_GUID) {
 263     PE32     PE32           |.efi
 264     UI       STRING="$(MODULE_NAME)" Optional
 265   }
 266
 267
 268 [Rule.Common.UEFI_DRIVER]
 269   FILE DRIVER = $(NAMED_GUID) {
 270     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 271     PE32         PE32                    |.efi
 272     UI           STRING="$(MODULE_NAME)" Optional
 273   }
 274
 275 [Rule.Common.DXE_DRIVER]
 276   FILE DRIVER = $(NAMED_GUID) {
 277     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 278     PE32         PE32                    |.efi
 279     UI           STRING="$(MODULE_NAME)" Optional
 280   }
 281
 282 [Rule.Common.DXE_RUNTIME_DRIVER]
 283   FILE DRIVER = $(NAMED_GUID) {
 284     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 285     PE32         PE32                    |.efi
 286     UI           STRING="$(MODULE_NAME)" Optional
 287   }
 288
 289
 290 [Rule.Common.UEFI_APPLICATION]
 291   FILE APPLICATION = $(NAMED_GUID) {
 292     UI     STRING ="$(MODULE_NAME)" Optional
 293     PE32   PE32                    |.efi
 294   }