BeagleBoardPkg/BeagleBoardPkg.fdf

   1 # FLASH layout file for Beagle board.
   2 #
   3 # Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
   4 # Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
   5 #
   6 #    This program and the accompanying materials
   7 #    are licensed and made available under the terms and conditions of the BSD License
   8 #    which accompanies this distribution. The full text of the license may be found at
   9 #    http://opensource.org/licenses/bsd-license.php
  10 #
  11 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14
  15 ################################################################################
  16 #
  17 # FD Section
  18 # The [FD] Section is made up of the definition statements and a
  19 # description of what goes into  the Flash Device Image.  Each FD section
  20 # defines one flash "device" image.  A flash device image may be one of
  21 # the following: Removable media bootable image (like a boot floppy
  22 # image,) an Option ROM image (that would be "flashed" into an add-in
  23 # card,) a System "Flash"  image (that would be burned into a system's
  24 # flash) or an Update ("Capsule") image that will be used to update and
  25 # existing system flash.
  26 #
  27 ################################################################################
  28
  29
  30 [FD.BeagleBoard_EFI]
  31 BaseAddress   = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.
  32 Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device
  33 ErasePolarity = 1
  34 BlockSize     = 0x1
  35 NumBlocks     = 0xB0000
  36
  37 ################################################################################
  38 #
  39 # Following are lists of FD Region layout which correspond to the locations of different
  40 # images within the flash device.
  41 #
  42 # Regions must be defined in ascending order and may not overlap.
  43 #
  44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  46 # "0x" characters. Like:
  47 # Offset|Size
  48 # PcdOffsetCName|PcdSizeCName
  49 # RegionType <FV, DATA, or FILE>
  50 #
  51 ################################################################################
  52 0x00000000|0x00000200
  53 FILE = BeagleBoardPkg/ConfigurationHeader.bin
  54
  55 0x00000200|0x00000008
  56 DATA = {
  57   0xF8, 0xFD, 0x0A, 0x00,   # image size:   0xB0000 - 0x208 == 0xAFDF8
  58   0x00, 0x80, 0x00, 0x80    # entry point:  0x80008000
  59 }
  60
  61 0x00000208|0x000AFDF8
  62 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  63 FV = FVMAIN_COMPACT
  64
  65 ################################################################################
  66 #
  67 # FV Section
  68 #
  69 # [FV] section is used to define what components or modules are placed within a flash
  70 # device file.  This section also defines order the components and modules are positioned
  71 # within the image.  The [FV] section consists of define statements, set statements and
  72 # module statements.
  73 #
  74 ################################################################################
  75
  76 [FV.FvMain]
  77 BlockSize          = 0x1
  78 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  79 FvAlignment        = 8         # FV alignment and FV attributes setting.
  80 ERASE_POLARITY     = 1
  81 MEMORY_MAPPED      = TRUE
  82 STICKY_WRITE       = TRUE
  83 LOCK_CAP           = TRUE
  84 LOCK_STATUS        = TRUE
  85 WRITE_DISABLED_CAP = TRUE
  86 WRITE_ENABLED_CAP  = TRUE
  87 WRITE_STATUS       = TRUE
  88 WRITE_LOCK_CAP     = TRUE
  89 WRITE_LOCK_STATUS  = TRUE
  90 READ_DISABLED_CAP  = TRUE
  91 READ_ENABLED_CAP   = TRUE
  92 READ_STATUS        = TRUE
  93 READ_LOCK_CAP      = TRUE
  94 READ_LOCK_STATUS   = TRUE
  95 FvNameGuid         = d0dd3e90-343d-4cb3-8f69-772214989282
  96
  97   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  98
  99   #
 100   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 101   #
 102   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 103
 104   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 105   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 106   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 107   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 108   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 109   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 110
 111   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 112   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 113   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 114   INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
 115   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 116
 117   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 118   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 119   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 120
 121 !if $(TARGET) == RELEASE
 122   #
 123   # Semi-hosting filesystem
 124   #
 125   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 126 !endif
 127
 128   #
 129   # Nand Flash
 130   #
 131   INF Omap35xxPkg/Flash/Flash.inf
 132
 133   #
 134   # MMC/SD
 135   #
 136   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 137   INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf
 138
 139   #
 140   # I2C
 141   #
 142   INF Omap35xxPkg/SmbusDxe/Smbus.inf
 143
 144   #
 145   # SoC Drivers
 146   #
 147   INF Omap35xxPkg/Gpio/Gpio.inf
 148   INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
 149   INF Omap35xxPkg/TimerDxe/TimerDxe.inf
 150   INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
 151
 152   #
 153   # Power IC
 154   #
 155   INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
 156
 157   #
 158   # FAT filesystem + GPT/MBR partitioning
 159   #
 160   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 161   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 162   INF FatPkg/EnhancedFatDxe/Fat.inf
 163   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 164
 165   #
 166   # USB Support
 167   #
 168
 169   INF Omap35xxPkg/PciEmulation/PciEmulation.inf
 170
 171   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 172   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 173   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 174
 175   #
 176   # UEFI application (Shell Embedded Boot Loader)
 177   #
 178   INF ShellPkg/Application/Shell/Shell.inf
 179
 180   #
 181   # Bds
 182   #
 183   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 184   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 185   INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 186   INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
 187   INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
 188   INF MdeModulePkg/Application/UiApp/UiApp.inf
 189
 190
 191 [FV.FVMAIN_COMPACT]
 192 FvAlignment        = 8
 193 ERASE_POLARITY     = 1
 194 MEMORY_MAPPED      = TRUE
 195 STICKY_WRITE       = TRUE
 196 LOCK_CAP           = TRUE
 197 LOCK_STATUS        = TRUE
 198 WRITE_DISABLED_CAP = TRUE
 199 WRITE_ENABLED_CAP  = TRUE
 200 WRITE_STATUS       = TRUE
 201 WRITE_LOCK_CAP     = TRUE
 202 WRITE_LOCK_STATUS  = TRUE
 203 READ_DISABLED_CAP  = TRUE
 204 READ_ENABLED_CAP   = TRUE
 205 READ_STATUS        = TRUE
 206 READ_LOCK_CAP      = TRUE
 207 READ_LOCK_STATUS   = TRUE
 208
 209   INF ArmPlatformPkg/PrePi/PeiUniCore.inf
 210
 211   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 212     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 213       SECTION FV_IMAGE = FVMAIN
 214     }
 215   }
 216
 217
 218 ################################################################################
 219 #
 220 # Rules are use with the [FV] section's module INF type to define
 221 # how an FFS file is created for a given INF file. The following Rule are the default
 222 # rules for the different module type. User can add the customized rules to define the
 223 # content of the FFS file.
 224 #
 225 ################################################################################
 226
 227
 228 ############################################################################
 229 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 230 ############################################################################
 231 #
 232 #[Rule.Common.DXE_DRIVER]
 233 #  FILE DRIVER = $(NAMED_GUID) {
 234 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 235 #    COMPRESS PI_STD {
 236 #      GUIDED {
 237 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 238 #        UI       STRING="$(MODULE_NAME)" Optional
 239 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 240 #      }
 241 #    }
 242 #  }
 243 #
 244 ############################################################################
 245
 246 [Rule.Common.SEC]
 247   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 248     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 249   }
 250
 251 [Rule.Common.PEI_CORE]
 252   FILE PEI_CORE = $(NAMED_GUID) {
 253     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 254     UI     STRING ="$(MODULE_NAME)" Optional
 255   }
 256
 257 [Rule.Common.PEIM]
 258   FILE PEIM = $(NAMED_GUID) {
 259      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 260      PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
 261      UI       STRING="$(MODULE_NAME)" Optional
 262   }
 263
 264 [Rule.Common.PEIM.TIANOCOMPRESSED]
 265   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 266     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 267     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 268       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 269       UI        STRING="$(MODULE_NAME)" Optional
 270     }
 271   }
 272
 273 [Rule.Common.DXE_CORE]
 274   FILE DXE_CORE = $(NAMED_GUID) {
 275     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 276     UI       STRING="$(MODULE_NAME)" Optional
 277   }
 278
 279
 280 [Rule.Common.UEFI_DRIVER]
 281   FILE DRIVER = $(NAMED_GUID) {
 282     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 283     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 284     UI           STRING="$(MODULE_NAME)" Optional
 285   }
 286
 287 [Rule.Common.DXE_DRIVER]
 288   FILE DRIVER = $(NAMED_GUID) {
 289     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 290     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 291     UI           STRING="$(MODULE_NAME)" Optional
 292   }
 293
 294 [Rule.Common.DXE_RUNTIME_DRIVER]
 295   FILE DRIVER = $(NAMED_GUID) {
 296     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 297     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 298     UI           STRING="$(MODULE_NAME)" Optional
 299   }
 300
 301 [Rule.Common.UEFI_APPLICATION]
 302   FILE APPLICATION = $(NAMED_GUID) {
 303     UI     STRING ="$(MODULE_NAME)" Optional
 304     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 305   }
 306
 307 [Rule.Common.UEFI_DRIVER.BINARY]
 308   FILE DRIVER = $(NAMED_GUID) {
 309     DXE_DEPEX DXE_DEPEX Optional      |.depex
 310     PE32      PE32                    |.efi
 311     UI        STRING="$(MODULE_NAME)" Optional
 312     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 313   }
 314
 315 [Rule.Common.UEFI_APPLICATION.BINARY]
 316   FILE APPLICATION = $(NAMED_GUID) {
 317     PE32      PE32                    |.efi
 318     UI        STRING="$(MODULE_NAME)" Optional
 319     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 320   }