BeagleBoardPkg/BeagleBoardPkg.fdf

   1 # FLASH layout file for Beagle board.
   2 #
   3 # Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
   4 #
   5 #    This program and the accompanying materials
   6 #    are licensed and made available under the terms and conditions of the BSD License
   7 #    which accompanies this distribution. The full text of the license may be found at
   8 #    http://opensource.org/licenses/bsd-license.php
   9 #
  10 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28
  29 [FD.BeagleBoard_EFI]
  30 BaseAddress   = 0x80008000|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.
  31 Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device
  32 ErasePolarity = 1
  33 BlockSize     = 0x1
  34 NumBlocks     = 0xB0000
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51 0x00000000|0x000B0000
  52 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  53 FV = FVMAIN_COMPACT
  54
  55 ################################################################################
  56 #
  57 # FV Section
  58 #
  59 # [FV] section is used to define what components or modules are placed within a flash
  60 # device file.  This section also defines order the components and modules are positioned
  61 # within the image.  The [FV] section consists of define statements, set statements and
  62 # module statements.
  63 #
  64 ################################################################################
  65
  66 [FV.FvMain]
  67 BlockSize          = 0x1
  68 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  69 FvAlignment        = 8         # FV alignment and FV attributes setting.
  70 ERASE_POLARITY     = 1
  71 MEMORY_MAPPED      = TRUE
  72 STICKY_WRITE       = TRUE
  73 LOCK_CAP           = TRUE
  74 LOCK_STATUS        = TRUE
  75 WRITE_DISABLED_CAP = TRUE
  76 WRITE_ENABLED_CAP  = TRUE
  77 WRITE_STATUS       = TRUE
  78 WRITE_LOCK_CAP     = TRUE
  79 WRITE_LOCK_STATUS  = TRUE
  80 READ_DISABLED_CAP  = TRUE
  81 READ_ENABLED_CAP   = TRUE
  82 READ_STATUS        = TRUE
  83 READ_LOCK_CAP      = TRUE
  84 READ_LOCK_STATUS   = TRUE
  85
  86   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  87
  88   #
  89   # PI DXE Drivers producing Architectural Protocols (EFI Services)
  90   #
  91   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  92
  93   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  94   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  95   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
  96   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  97   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
  98   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
  99
 100   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 101   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 102   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 103   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 104   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 105
 106   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 107   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 108   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 109
 110 !if $(TARGET) == RELEASE
 111   #
 112   # Semi-hosting filesystem
 113   #
 114   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 115 !endif
 116
 117   #
 118   # Nand Flash
 119   #
 120   INF Omap35xxPkg/Flash/Flash.inf
 121
 122   #
 123   # MMC/SD
 124   #
 125   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 126   INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf
 127
 128   #
 129   # I2C
 130   #
 131   INF Omap35xxPkg/SmbusDxe/Smbus.inf
 132
 133   #
 134   # SoC Drivers
 135   #
 136   INF Omap35xxPkg/Gpio/Gpio.inf
 137   INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
 138   INF Omap35xxPkg/TimerDxe/TimerDxe.inf
 139   INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
 140
 141   #
 142   # Power IC
 143   #
 144   INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
 145
 146   #
 147   # FAT filesystem + GPT/MBR partitioning
 148   #
 149   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 150   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 151   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 152   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 153
 154   #
 155   # USB Support
 156   #
 157
 158   INF Omap35xxPkg/PciEmulation/PciEmulation.inf
 159
 160   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 161   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 162   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 163
 164   #
 165   # UEFI application (Shell Embedded Boot Loader)
 166   #
 167   INF ShellBinPkg/UefiShell/UefiShell.inf
 168
 169   #
 170   # Bds
 171   #
 172   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 173   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 174   INF ArmPlatformPkg/Bds/Bds.inf
 175
 176
 177 [FV.FVMAIN_COMPACT]
 178 FvAlignment        = 8
 179 ERASE_POLARITY     = 1
 180 MEMORY_MAPPED      = TRUE
 181 STICKY_WRITE       = TRUE
 182 LOCK_CAP           = TRUE
 183 LOCK_STATUS        = TRUE
 184 WRITE_DISABLED_CAP = TRUE
 185 WRITE_ENABLED_CAP  = TRUE
 186 WRITE_STATUS       = TRUE
 187 WRITE_LOCK_CAP     = TRUE
 188 WRITE_LOCK_STATUS  = TRUE
 189 READ_DISABLED_CAP  = TRUE
 190 READ_ENABLED_CAP   = TRUE
 191 READ_STATUS        = TRUE
 192 READ_LOCK_CAP      = TRUE
 193 READ_LOCK_STATUS   = TRUE
 194
 195   INF ArmPlatformPkg/PrePi/PeiUniCore.inf
 196
 197   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 198     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 199       SECTION FV_IMAGE = FVMAIN
 200     }
 201   }
 202
 203
 204 ################################################################################
 205 #
 206 # Rules are use with the [FV] section's module INF type to define
 207 # how an FFS file is created for a given INF file. The following Rule are the default
 208 # rules for the different module type. User can add the customized rules to define the
 209 # content of the FFS file.
 210 #
 211 ################################################################################
 212
 213
 214 ############################################################################
 215 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 216 ############################################################################
 217 #
 218 #[Rule.Common.DXE_DRIVER]
 219 #  FILE DRIVER = $(NAMED_GUID) {
 220 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 221 #    COMPRESS PI_STD {
 222 #      GUIDED {
 223 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 224 #        UI       STRING="$(MODULE_NAME)" Optional
 225 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 226 #      }
 227 #    }
 228 #  }
 229 #
 230 ############################################################################
 231
 232 [Rule.Common.SEC]
 233   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 234     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 235   }
 236
 237 [Rule.Common.PEI_CORE]
 238   FILE PEI_CORE = $(NAMED_GUID) {
 239     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 240     UI     STRING ="$(MODULE_NAME)" Optional
 241   }
 242
 243 [Rule.Common.PEIM]
 244   FILE PEIM = $(NAMED_GUID) {
 245      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 246      PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
 247      UI       STRING="$(MODULE_NAME)" Optional
 248   }
 249
 250 [Rule.Common.PEIM.TIANOCOMPRESSED]
 251   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 252     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 253     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 254       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 255       UI        STRING="$(MODULE_NAME)" Optional
 256     }
 257   }
 258
 259 [Rule.Common.DXE_CORE]
 260   FILE DXE_CORE = $(NAMED_GUID) {
 261     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 262     UI       STRING="$(MODULE_NAME)" Optional
 263   }
 264
 265
 266 [Rule.Common.UEFI_DRIVER]
 267   FILE DRIVER = $(NAMED_GUID) {
 268     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 269     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 270     UI           STRING="$(MODULE_NAME)" Optional
 271   }
 272
 273 [Rule.Common.DXE_DRIVER]
 274   FILE DRIVER = $(NAMED_GUID) {
 275     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 276     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 277     UI           STRING="$(MODULE_NAME)" Optional
 278   }
 279
 280 [Rule.Common.DXE_RUNTIME_DRIVER]
 281   FILE DRIVER = $(NAMED_GUID) {
 282     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 283     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 284     UI           STRING="$(MODULE_NAME)" Optional
 285   }
 286
 287 [Rule.Common.UEFI_APPLICATION]
 288   FILE APPLICATION = $(NAMED_GUID) {
 289     UI     STRING ="$(MODULE_NAME)" Optional
 290     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 291   }
 292
 293 [Rule.Common.UEFI_DRIVER.BINARY]
 294   FILE DRIVER = $(NAMED_GUID) {
 295     DXE_DEPEX DXE_DEPEX Optional      |.depex
 296     PE32      PE32                    |.efi
 297     UI        STRING="$(MODULE_NAME)" Optional
 298     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 299   }
 300
 301 [Rule.Common.UEFI_APPLICATION.BINARY]
 302   FILE APPLICATION = $(NAMED_GUID) {
 303     PE32      PE32                    |.efi
 304     UI        STRING="$(MODULE_NAME)" Optional
 305     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 306   }