]> git.proxmox.com Git - mirror_edk2.git/blob - BeagleBoardPkg/BeagleBoardPkg.fdf
d291894a10c2a039bfefbd4c6c011145ded97102
[mirror_edk2.git] / BeagleBoardPkg / BeagleBoardPkg.fdf
1 # FLASH layout file for Beagle board.
2 #
3 # Copyright (c) 2009, Apple Inc. All rights reserved.
4 #
5 # All rights reserved. This program and the accompanying materials
6 # are licensed and made available under the terms and conditions of the BSD License
7 # which accompanies this distribution. The full text of the license may be found at
8 # http://opensource.org/licenses/bsd-license.php
9 #
10 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
12 #
13
14 ################################################################################
15 #
16 # FD Section
17 # The [FD] Section is made up of the definition statements and a
18 # description of what goes into the Flash Device Image. Each FD section
19 # defines one flash "device" image. A flash device image may be one of
20 # the following: Removable media bootable image (like a boot floppy
21 # image,) an Option ROM image (that would be "flashed" into an add-in
22 # card,) a System "Flash" image (that would be burned into a system's
23 # flash) or an Update ("Capsule") image that will be used to update and
24 # existing system flash.
25 #
26 ################################################################################
27
28
29 [FD.BeagleBoard_EFI]
30 ####BaseAddress = 0x80208000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress #The base address of the FLASH Device.
31 BaseAddress = 0x80008000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress #The base address of the FLASH Device.
32 Size = 0x00080000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize #The size in bytes of the FLASH Device
33 ErasePolarity = 1
34 BlockSize = 0x40
35 NumBlocks = 0x2000
36
37 ################################################################################
38 #
39 # Following are lists of FD Region layout which correspond to the locations of different
40 # images within the flash device.
41 #
42 # Regions must be defined in ascending order and may not overlap.
43 #
44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
46 # "0x" characters. Like:
47 # Offset|Size
48 # PcdOffsetCName|PcdSizeCName
49 # RegionType <FV, DATA, or FILE>
50 #
51 ################################################################################
52
53 # 512 bytes of configuration header & 8 bytes of image header
54 0x00000000|0x00000208
55
56 0x00000208|0x0007FDF8
57 gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize
58 FV = FVMAIN_COMPACT
59
60 ################################################################################
61 #
62 # FV Section
63 #
64 # [FV] section is used to define what components or modules are placed within a flash
65 # device file. This section also defines order the components and modules are positioned
66 # within the image. The [FV] section consists of define statements, set statements and
67 # module statements.
68 #
69 ################################################################################
70
71 [FV.FvMain]
72 BlockSize = 0x40
73 NumBlocks = 0 # This FV gets compressed so make it just big enough
74 FvAlignment = 8 # FV alignment and FV attributes setting.
75 ERASE_POLARITY = 1
76 MEMORY_MAPPED = TRUE
77 STICKY_WRITE = TRUE
78 LOCK_CAP = TRUE
79 LOCK_STATUS = TRUE
80 WRITE_DISABLED_CAP = TRUE
81 WRITE_ENABLED_CAP = TRUE
82 WRITE_STATUS = TRUE
83 WRITE_LOCK_CAP = TRUE
84 WRITE_LOCK_STATUS = TRUE
85 READ_DISABLED_CAP = TRUE
86 READ_ENABLED_CAP = TRUE
87 READ_STATUS = TRUE
88 READ_LOCK_CAP = TRUE
89 READ_LOCK_STATUS = TRUE
90
91 INF MdeModulePkg/Core/Dxe/DxeMain.inf
92
93 #
94 # PI DXE Drivers producing Architectural Protocols (EFI Services)
95 #
96 INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
97
98 INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
99 INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
100 INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
101 INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
102 INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
103 INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
104
105 INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
106
107 INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
108 INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
109 INF EmbeddedPkg/TemplateMetronomeDxe/TemplateMetronomeDxe.inf
110
111 #
112 # Semi-hosting filesystem
113 #
114 INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
115
116 #
117 # Nand Flash
118 #
119 INF Omap35xxPkg/Flash/Flash.inf
120
121 #
122 # MMC/SD
123 #
124 INF Omap35xxPkg/MMCHSDxe/MMCHS.inf
125
126 #
127 # I2C
128 #
129 INF Omap35xxPkg/SmbusDxe/Smbus.inf
130
131 #
132 # SoC Drivers
133 #
134 INF Omap35xxPkg/Gpio/Gpio.inf
135 INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
136 INF Omap35xxPkg/TimerDxe/TimerDxe.inf
137
138 #
139 # Power IC
140 #
141 INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
142
143 #
144 # FAT filesystem + GPT/MBR partitioning
145 #
146 INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
147 INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
148 INF FatPkg/EnhancedFatDxe/Fat.inf
149 INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
150
151 #
152 # USB Support
153 #
154
155 INF Omap35xxPkg/PciEmulation/PciEmulation.inf
156
157 #NOTE: Open source EHCI stack doesn't work on Beagleboard.
158 #NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain.
159 #INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
160 #INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
161 #INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
162
163 #
164 # UEFI application (Shell Embedded Boot Loader)
165 #
166 INF EmbeddedPkg/Ebl/Ebl.inf
167
168
169 #
170 # Bds
171 #
172 INF BeagleBoardPkg/Bds/Bds.inf
173
174 #
175 # Gdb Stub
176 #
177 #INF ArmPkg/Drivers/DebugSupportDxe/DebugSupportDxe.inf
178
179
180 [FV.FVMAIN_COMPACT]
181 FvAlignment = 8
182 ERASE_POLARITY = 1
183 MEMORY_MAPPED = TRUE
184 STICKY_WRITE = TRUE
185 LOCK_CAP = TRUE
186 LOCK_STATUS = TRUE
187 WRITE_DISABLED_CAP = TRUE
188 WRITE_ENABLED_CAP = TRUE
189 WRITE_STATUS = TRUE
190 WRITE_LOCK_CAP = TRUE
191 WRITE_LOCK_STATUS = TRUE
192 READ_DISABLED_CAP = TRUE
193 READ_ENABLED_CAP = TRUE
194 READ_STATUS = TRUE
195 READ_LOCK_CAP = TRUE
196 READ_LOCK_STATUS = TRUE
197
198 INF BeagleBoardPkg/Sec/Sec.inf
199 # INF MdeModulePkg/Core/Dxe/DxeMain.inf
200
201 FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
202 SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
203 SECTION FV_IMAGE = FVMAIN
204 }
205 }
206
207
208 ################################################################################
209 #
210 # Rules are use with the [FV] section's module INF type to define
211 # how an FFS file is created for a given INF file. The following Rule are the default
212 # rules for the different module type. User can add the customized rules to define the
213 # content of the FFS file.
214 #
215 ################################################################################
216
217
218 ############################################################################
219 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
220 ############################################################################
221 #
222 #[Rule.Common.DXE_DRIVER]
223 # FILE DRIVER = $(NAMED_GUID) {
224 # DXE_DEPEX DXE_DEPEX Optional |.depex
225 # COMPRESS PI_STD {
226 # GUIDED {
227 # PE32 PE32 |.efi
228 # UI STRING="$(MODULE_NAME)" Optional
229 # VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
230 # }
231 # }
232 # }
233 #
234 ############################################################################
235
236 [Rule.Common.SEC]
237 FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
238 TE TE Align = 8 |.efi
239 }
240
241 [Rule.Common.PEI_CORE]
242 FILE PEI_CORE = $(NAMED_GUID) {
243 TE TE |.efi
244 UI STRING ="$(MODULE_NAME)" Optional
245 }
246
247 [Rule.Common.PEIM]
248 FILE PEIM = $(NAMED_GUID) {
249 PEI_DEPEX PEI_DEPEX Optional |.depex
250 PE32 PE32 |.efi
251 UI STRING="$(MODULE_NAME)" Optional
252 }
253
254 [Rule.Common.PEIM.TIANOCOMPRESSED]
255 FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
256 PEI_DEPEX PEI_DEPEX Optional |.depex
257 GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
258 PE32 PE32 |.efi
259 UI STRING="$(MODULE_NAME)" Optional
260 }
261 }
262
263 [Rule.Common.DXE_CORE]
264 FILE DXE_CORE = $(NAMED_GUID) {
265 PE32 PE32 |.efi
266 UI STRING="$(MODULE_NAME)" Optional
267 }
268
269
270 [Rule.Common.UEFI_DRIVER]
271 FILE DRIVER = $(NAMED_GUID) {
272 DXE_DEPEX DXE_DEPEX Optional |.depex
273 PE32 PE32 |.efi
274 UI STRING="$(MODULE_NAME)" Optional
275 }
276
277 [Rule.Common.DXE_DRIVER]
278 FILE DRIVER = $(NAMED_GUID) {
279 DXE_DEPEX DXE_DEPEX Optional |.depex
280 PE32 PE32 |.efi
281 UI STRING="$(MODULE_NAME)" Optional
282 }
283
284 [Rule.Common.DXE_RUNTIME_DRIVER]
285 FILE DRIVER = $(NAMED_GUID) {
286 DXE_DEPEX DXE_DEPEX Optional |.depex
287 PE32 PE32 |.efi
288 UI STRING="$(MODULE_NAME)" Optional
289 }
290
291
292 [Rule.Common.UEFI_APPLICATION]
293 FILE APPLICATION = $(NAMED_GUID) {
294 UI STRING ="$(MODULE_NAME)" Optional
295 PE32 PE32 |.efi
296 }