BeagleBoardPkg/BeagleBoardPkg.fdf

   1 # FLASH layout file for Beagle board.
   2 #
   3 # Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
   4 #
   5 #    This program and the accompanying materials
   6 #    are licensed and made available under the terms and conditions of the BSD License
   7 #    which accompanies this distribution. The full text of the license may be found at
   8 #    http://opensource.org/licenses/bsd-license.php
   9 #
  10 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28
  29 [FD.BeagleBoard_EFI]
  30 ####BaseAddress   = 0x80208000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress  #The base address of the FLASH Device.
  31 BaseAddress   = 0x80008000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress  #The base address of the FLASH Device.
  32 Size          = 0x00080000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize         #The size in bytes of the FLASH Device
  33 ErasePolarity = 1
  34 BlockSize     = 0x40
  35 NumBlocks     = 0x2000
  36
  37 ################################################################################
  38 #
  39 # Following are lists of FD Region layout which correspond to the locations of different
  40 # images within the flash device.
  41 #
  42 # Regions must be defined in ascending order and may not overlap.
  43 #
  44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  46 # "0x" characters. Like:
  47 # Offset|Size
  48 # PcdOffsetCName|PcdSizeCName
  49 # RegionType <FV, DATA, or FILE>
  50 #
  51 ################################################################################
  52
  53 # 512 bytes of configuration header & 8 bytes of image header
  54 0x00000000|0x00000208
  55
  56 0x00000208|0x0007FDC0
  57 gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize
  58 FV = FVMAIN_COMPACT
  59
  60 ################################################################################
  61 #
  62 # FV Section
  63 #
  64 # [FV] section is used to define what components or modules are placed within a flash
  65 # device file.  This section also defines order the components and modules are positioned
  66 # within the image.  The [FV] section consists of define statements, set statements and
  67 # module statements.
  68 #
  69 ################################################################################
  70
  71 [FV.FvMain]
  72 BlockSize          = 0x40
  73 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  74 FvAlignment        = 8         # FV alignment and FV attributes setting.
  75 ERASE_POLARITY     = 1
  76 MEMORY_MAPPED      = TRUE
  77 STICKY_WRITE       = TRUE
  78 LOCK_CAP           = TRUE
  79 LOCK_STATUS        = TRUE
  80 WRITE_DISABLED_CAP = TRUE
  81 WRITE_ENABLED_CAP  = TRUE
  82 WRITE_STATUS       = TRUE
  83 WRITE_LOCK_CAP     = TRUE
  84 WRITE_LOCK_STATUS  = TRUE
  85 READ_DISABLED_CAP  = TRUE
  86 READ_ENABLED_CAP   = TRUE
  87 READ_STATUS        = TRUE
  88 READ_LOCK_CAP      = TRUE
  89 READ_LOCK_STATUS   = TRUE
  90
  91   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  92
  93   #
  94   # PI DXE Drivers producing Architectural Protocols (EFI Services)
  95   #
  96   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  97
  98   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  99   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 100   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 101   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 102   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 103   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 104
 105   INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
 106
 107   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 108   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 109   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 110
 111   #
 112   # Semi-hosting filesystem
 113   #
 114   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 115
 116   #
 117   # Nand Flash
 118   #
 119   INF Omap35xxPkg/Flash/Flash.inf
 120
 121   #
 122   # MMC/SD
 123   #
 124   INF Omap35xxPkg/MMCHSDxe/MMCHS.inf
 125
 126   #
 127   # I2C
 128   #
 129   INF Omap35xxPkg/SmbusDxe/Smbus.inf
 130
 131   #
 132   # SoC Drivers
 133   #
 134   INF Omap35xxPkg/Gpio/Gpio.inf
 135   INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
 136   INF Omap35xxPkg/TimerDxe/TimerDxe.inf
 137
 138   #
 139   # Power IC
 140   #
 141   INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
 142
 143   #
 144   # FAT filesystem + GPT/MBR partitioning
 145   #
 146   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 147   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 148   INF FatPkg/EnhancedFatDxe/Fat.inf
 149   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 150
 151   #
 152   # USB Support
 153   #
 154
 155   INF Omap35xxPkg/PciEmulation/PciEmulation.inf
 156
 157   #NOTE: Open source EHCI stack doesn't work on Beagleboard.
 158   #NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain.
 159   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 160   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 161   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 162
 163   #
 164   # UEFI application (Shell Embedded Boot Loader)
 165   #
 166   INF EmbeddedPkg/Ebl/Ebl.inf
 167
 168
 169   #
 170   # Bds
 171   #
 172   INF BeagleBoardPkg/Bds/Bds.inf
 173
 174
 175
 176 [FV.FVMAIN_COMPACT]
 177 FvAlignment        = 8
 178 ERASE_POLARITY     = 1
 179 MEMORY_MAPPED      = TRUE
 180 STICKY_WRITE       = TRUE
 181 LOCK_CAP           = TRUE
 182 LOCK_STATUS        = TRUE
 183 WRITE_DISABLED_CAP = TRUE
 184 WRITE_ENABLED_CAP  = TRUE
 185 WRITE_STATUS       = TRUE
 186 WRITE_LOCK_CAP     = TRUE
 187 WRITE_LOCK_STATUS  = TRUE
 188 READ_DISABLED_CAP  = TRUE
 189 READ_ENABLED_CAP   = TRUE
 190 READ_STATUS        = TRUE
 191 READ_LOCK_CAP      = TRUE
 192 READ_LOCK_STATUS   = TRUE
 193
 194   INF BeagleBoardPkg/Sec/Sec.inf
 195
 196   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 197     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 198       SECTION FV_IMAGE = FVMAIN
 199     }
 200   }
 201
 202
 203 ################################################################################
 204 #
 205 # Rules are use with the [FV] section's module INF type to define
 206 # how an FFS file is created for a given INF file. The following Rule are the default
 207 # rules for the different module type. User can add the customized rules to define the
 208 # content of the FFS file.
 209 #
 210 ################################################################################
 211
 212
 213 ############################################################################
 214 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 215 ############################################################################
 216 #
 217 #[Rule.Common.DXE_DRIVER]
 218 #  FILE DRIVER = $(NAMED_GUID) {
 219 #    DXE_DEPEX    DXE_DEPEX Optional      |.depex
 220 #    COMPRESS PI_STD {
 221 #      GUIDED {
 222 #        PE32     PE32                    |.efi
 223 #        UI       STRING="$(MODULE_NAME)" Optional
 224 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 225 #      }
 226 #    }
 227 #  }
 228 #
 229 ############################################################################
 230
 231 [Rule.Common.SEC]
 232   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 233     TE  TE    Align = 8      |.efi
 234   }
 235
 236 [Rule.Common.PEI_CORE]
 237   FILE PEI_CORE = $(NAMED_GUID) {
 238     TE     TE           |.efi
 239     UI     STRING ="$(MODULE_NAME)" Optional
 240   }
 241
 242 [Rule.Common.PEIM]
 243   FILE PEIM = $(NAMED_GUID) {
 244      PEI_DEPEX PEI_DEPEX Optional        |.depex
 245      PE32      PE32                      |.efi
 246      UI       STRING="$(MODULE_NAME)" Optional
 247   }
 248
 249 [Rule.Common.PEIM.TIANOCOMPRESSED]
 250   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 251     PEI_DEPEX PEI_DEPEX Optional         |.depex
 252     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 253       PE32      PE32                     |.efi
 254       UI        STRING="$(MODULE_NAME)" Optional
 255     }
 256   }
 257
 258 [Rule.Common.DXE_CORE]
 259   FILE DXE_CORE = $(NAMED_GUID) {
 260     PE32     PE32           |.efi
 261     UI       STRING="$(MODULE_NAME)" Optional
 262   }
 263
 264
 265 [Rule.Common.UEFI_DRIVER]
 266   FILE DRIVER = $(NAMED_GUID) {
 267     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 268     PE32         PE32                    |.efi
 269     UI           STRING="$(MODULE_NAME)" Optional
 270   }
 271
 272 [Rule.Common.DXE_DRIVER]
 273   FILE DRIVER = $(NAMED_GUID) {
 274     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 275     PE32         PE32                    |.efi
 276     UI           STRING="$(MODULE_NAME)" Optional
 277   }
 278
 279 [Rule.Common.DXE_RUNTIME_DRIVER]
 280   FILE DRIVER = $(NAMED_GUID) {
 281     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 282     PE32         PE32                    |.efi
 283     UI           STRING="$(MODULE_NAME)" Optional
 284   }
 285
 286
 287 [Rule.Common.UEFI_APPLICATION]
 288   FILE APPLICATION = $(NAMED_GUID) {
 289     UI     STRING ="$(MODULE_NAME)" Optional
 290     PE32   PE32                    |.efi
 291   }