BeagleBoardPkg/BeagleBoardPkg.fdf

   1 # FLASH layout file for Beagle board.
   2 #
   3 # Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
   4 # Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
   5 # Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
   6 #
   7 #    This program and the accompanying materials
   8 #    are licensed and made available under the terms and conditions of the BSD License
   9 #    which accompanies this distribution. The full text of the license may be found at
  10 #    http://opensource.org/licenses/bsd-license.php
  11 #
  12 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  13 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  14 #
  15
  16 ################################################################################
  17 #
  18 # FD Section
  19 # The [FD] Section is made up of the definition statements and a
  20 # description of what goes into  the Flash Device Image.  Each FD section
  21 # defines one flash "device" image.  A flash device image may be one of
  22 # the following: Removable media bootable image (like a boot floppy
  23 # image,) an Option ROM image (that would be "flashed" into an add-in
  24 # card,) a System "Flash"  image (that would be burned into a system's
  25 # flash) or an Update ("Capsule") image that will be used to update and
  26 # existing system flash.
  27 #
  28 ################################################################################
  29
  30
  31 [FD.BeagleBoard_EFI]
  32 BaseAddress   = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.
  33 Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device
  34 ErasePolarity = 1
  35 BlockSize     = 0x1
  36 NumBlocks     = 0xB0000
  37
  38 ################################################################################
  39 #
  40 # Following are lists of FD Region layout which correspond to the locations of different
  41 # images within the flash device.
  42 #
  43 # Regions must be defined in ascending order and may not overlap.
  44 #
  45 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  46 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  47 # "0x" characters. Like:
  48 # Offset|Size
  49 # PcdOffsetCName|PcdSizeCName
  50 # RegionType <FV, DATA, or FILE>
  51 #
  52 ################################################################################
  53 0x00000000|0x00000200
  54 FILE = BeagleBoardPkg/ConfigurationHeader.bin
  55
  56 0x00000200|0x00000008
  57 DATA = {
  58   0xF8, 0xFD, 0x0A, 0x00,   # image size:   0xB0000 - 0x208 == 0xAFDF8
  59   0x00, 0x80, 0x00, 0x80    # entry point:  0x80008000
  60 }
  61
  62 0x00000208|0x000AFDF8
  63 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  64 FV = FVMAIN_COMPACT
  65
  66 ################################################################################
  67 #
  68 # FV Section
  69 #
  70 # [FV] section is used to define what components or modules are placed within a flash
  71 # device file.  This section also defines order the components and modules are positioned
  72 # within the image.  The [FV] section consists of define statements, set statements and
  73 # module statements.
  74 #
  75 ################################################################################
  76
  77 [FV.FvMain]
  78 BlockSize          = 0x1
  79 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  80 FvAlignment        = 8         # FV alignment and FV attributes setting.
  81 ERASE_POLARITY     = 1
  82 MEMORY_MAPPED      = TRUE
  83 STICKY_WRITE       = TRUE
  84 LOCK_CAP           = TRUE
  85 LOCK_STATUS        = TRUE
  86 WRITE_DISABLED_CAP = TRUE
  87 WRITE_ENABLED_CAP  = TRUE
  88 WRITE_STATUS       = TRUE
  89 WRITE_LOCK_CAP     = TRUE
  90 WRITE_LOCK_STATUS  = TRUE
  91 READ_DISABLED_CAP  = TRUE
  92 READ_ENABLED_CAP   = TRUE
  93 READ_STATUS        = TRUE
  94 READ_LOCK_CAP      = TRUE
  95 READ_LOCK_STATUS   = TRUE
  96 FvNameGuid         = d0dd3e90-343d-4cb3-8f69-772214989282
  97
  98   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  99
 100   #
 101   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 102   #
 103   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 104
 105   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 106   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 107   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 108   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 109   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 110   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 111
 112   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 113   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 114   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 115   INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
 116   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 117
 118   INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
 119   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 120   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 121
 122 !if $(TARGET) == RELEASE
 123   #
 124   # Semi-hosting filesystem
 125   #
 126   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 127 !endif
 128
 129   #
 130   # Nand Flash
 131   #
 132   INF Omap35xxPkg/Flash/Flash.inf
 133
 134   #
 135   # MMC/SD
 136   #
 137   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 138   INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf
 139
 140   #
 141   # I2C
 142   #
 143   INF Omap35xxPkg/SmbusDxe/Smbus.inf
 144
 145   #
 146   # SoC Drivers
 147   #
 148   INF Omap35xxPkg/Gpio/Gpio.inf
 149   INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
 150   INF Omap35xxPkg/TimerDxe/TimerDxe.inf
 151   INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
 152
 153   #
 154   # Power IC
 155   #
 156   INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
 157
 158   #
 159   # FAT filesystem + GPT/MBR partitioning
 160   #
 161   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 162   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 163   INF FatPkg/EnhancedFatDxe/Fat.inf
 164   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 165
 166   #
 167   # USB Support
 168   #
 169
 170   INF Omap35xxPkg/PciEmulation/PciEmulation.inf
 171   INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf
 172
 173   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 174   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 175   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 176
 177   #
 178   # UEFI application (Shell Embedded Boot Loader)
 179   #
 180   INF ShellPkg/Application/Shell/Shell.inf
 181   INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
 182
 183   #
 184   # Bds
 185   #
 186   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 187   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 188   INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 189   INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
 190   INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
 191   INF MdeModulePkg/Application/UiApp/UiApp.inf
 192
 193
 194 [FV.FVMAIN_COMPACT]
 195 FvAlignment        = 8
 196 ERASE_POLARITY     = 1
 197 MEMORY_MAPPED      = TRUE
 198 STICKY_WRITE       = TRUE
 199 LOCK_CAP           = TRUE
 200 LOCK_STATUS        = TRUE
 201 WRITE_DISABLED_CAP = TRUE
 202 WRITE_ENABLED_CAP  = TRUE
 203 WRITE_STATUS       = TRUE
 204 WRITE_LOCK_CAP     = TRUE
 205 WRITE_LOCK_STATUS  = TRUE
 206 READ_DISABLED_CAP  = TRUE
 207 READ_ENABLED_CAP   = TRUE
 208 READ_STATUS        = TRUE
 209 READ_LOCK_CAP      = TRUE
 210 READ_LOCK_STATUS   = TRUE
 211
 212   INF ArmPlatformPkg/PrePi/PeiUniCore.inf
 213
 214   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 215     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 216       SECTION FV_IMAGE = FVMAIN
 217     }
 218   }
 219
 220
 221 ################################################################################
 222 #
 223 # Rules are use with the [FV] section's module INF type to define
 224 # how an FFS file is created for a given INF file. The following Rule are the default
 225 # rules for the different module type. User can add the customized rules to define the
 226 # content of the FFS file.
 227 #
 228 ################################################################################
 229
 230
 231 ############################################################################
 232 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 233 ############################################################################
 234 #
 235 #[Rule.Common.DXE_DRIVER]
 236 #  FILE DRIVER = $(NAMED_GUID) {
 237 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 238 #    COMPRESS PI_STD {
 239 #      GUIDED {
 240 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 241 #        UI       STRING="$(MODULE_NAME)" Optional
 242 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 243 #      }
 244 #    }
 245 #  }
 246 #
 247 ############################################################################
 248
 249 [Rule.Common.SEC]
 250   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 251     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 252   }
 253
 254 [Rule.Common.PEI_CORE]
 255   FILE PEI_CORE = $(NAMED_GUID) {
 256     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 257     UI     STRING ="$(MODULE_NAME)" Optional
 258   }
 259
 260 [Rule.Common.PEIM]
 261   FILE PEIM = $(NAMED_GUID) {
 262      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 263      PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
 264      UI       STRING="$(MODULE_NAME)" Optional
 265   }
 266
 267 [Rule.Common.PEIM.TIANOCOMPRESSED]
 268   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 269     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 270     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 271       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 272       UI        STRING="$(MODULE_NAME)" Optional
 273     }
 274   }
 275
 276 [Rule.Common.DXE_CORE]
 277   FILE DXE_CORE = $(NAMED_GUID) {
 278     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 279     UI       STRING="$(MODULE_NAME)" Optional
 280   }
 281
 282
 283 [Rule.Common.UEFI_DRIVER]
 284   FILE DRIVER = $(NAMED_GUID) {
 285     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 286     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 287     UI           STRING="$(MODULE_NAME)" Optional
 288   }
 289
 290 [Rule.Common.DXE_DRIVER]
 291   FILE DRIVER = $(NAMED_GUID) {
 292     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 293     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 294     UI           STRING="$(MODULE_NAME)" Optional
 295   }
 296
 297 [Rule.Common.DXE_RUNTIME_DRIVER]
 298   FILE DRIVER = $(NAMED_GUID) {
 299     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 300     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 301     UI           STRING="$(MODULE_NAME)" Optional
 302   }
 303
 304 [Rule.Common.UEFI_APPLICATION]
 305   FILE APPLICATION = $(NAMED_GUID) {
 306     UI     STRING ="$(MODULE_NAME)" Optional
 307     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 308   }
 309
 310 [Rule.Common.UEFI_DRIVER.BINARY]
 311   FILE DRIVER = $(NAMED_GUID) {
 312     DXE_DEPEX DXE_DEPEX Optional      |.depex
 313     PE32      PE32                    |.efi
 314     UI        STRING="$(MODULE_NAME)" Optional
 315     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 316   }
 317
 318 [Rule.Common.UEFI_APPLICATION.BINARY]
 319   FILE APPLICATION = $(NAMED_GUID) {
 320     PE32      PE32                    |.efi
 321     UI        STRING="$(MODULE_NAME)" Optional
 322     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 323   }