BeagleBoardPkg/readme.txt

   1 On Ubuntu 10.04, in your $(WORKROOT) directory (eg: ~/dev/)
   2
   3 Build UEFI for the BeagleBoard :
   4 ================================
   5 # Requirements
   6 sudo apt-get install uuid-dev
   7
   8 # Get the arm-none-eabi Toolchain:
   9 cd $(WORKROOT)
  10 wget http://www.codesourcery.com/sgpp/lite/arm/portal/package7813/public/arm-none-eabi/arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
  11 tar xjf arm-2010.09-51-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
  12 Add the arm-none-eabi toolchain to your path
  13
  14 # Build UEFI
  15 svn co https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2 edk2 --username guest
  16 cd $(WORKROOT)/edk2
  17 svn co https://edk2-fatdriver2.svn.sourceforge.net/svnroot/edk2-fatdriver2/trunk/FatPkg FatPkg --username guest
  18 patch -p1 < ArmPlatformPkg/Documentation/patches/BaseTools-Pending-Patches.patch
  19 cd BeagleBoardPkg/
  20 ./build.sh
  21
  22 # To Build a Release verion of UEFI
  23 ./build.sh RELEASE
  24
  25
  26 Test UEFI on qEmu :
  27 ===================
  28
  29 Installing Linaro qEmu:
  30 -----------------------
  31 cd $(WORKROOT)
  32 git clone git://git.linaro.org/qemu/qemu-linaro.git
  33 cd $(WORKROOT)/qemu-linaro
  34 ./configure --target-list=arm-softmmu,arm-linux-user,armeb-linux-user
  35 make
  36
  37 Installing Linaro image Creator:
  38 --------------------------------
  39 wget http://launchpad.net/linaro-image-tools/trunk/0.4.8/+download/linaro-image-tools-0.4.8.tar.gz
  40 tar xzf linaro-image-tools-0.4.8.tar.gz
  41 cd $(WORKROOT)/linaro-image-tools-0.4.8/
  42 sudo apt-get install parted dosfstools uboot-mkimage python-argparse python-dbus python-debian python-parted qemu-arm-static btrfs-tools command-not-found
  43
  44 Creating u-boot + Linux Linaro image:
  45 -------------------------------------
  46 mkdir $(WORKROOT)/beagle_image && cd $(WORKROOT)/beagle_image
  47 wget http://releases.linaro.org/platform/linaro-m/hwpacks/final/hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz
  48 wget http://releases.linaro.org/platform/linaro-m/headless/release-candidate/linaro-m-headless-tar-20101101-0.tar.gz
  49 sudo $(WORKROOT)/linaro-image-tools-0.4.8/linaro-media-create --image_file beagle_sd.img --dev beagle --binary linaro-m-headless-tar-20101101-0.tar.gz --hwpack hwpack_linaro-omap3_20101109-1_armel_supported.tar.gz
  50 sudo chmod a+rw beagle_sd.img
  51
  52 Test u-boot + Linux Linaro image on qEmu:
  53 -----------------------------------------
  54 $(WORKROOT)/qemu-linaro/arm-softmmu/qemu-system-arm -M beagle -sd $(WORKROOT)/beagle_image/beagle_sd.img -serial stdio -clock unix
  55 # in u-boot:
  56 boot
  57
  58 Start UEFI from NOR Flash :
  59 ---------------------------
  60 # Adding zImage to beagle_sd.img
  61 mkdir /tmp/beagle_img1
  62 sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1
  63 cp zImage /tmp/beagle_img1
  64 sudo umount /tmp/beagle_img1
  65
  66 ./qemu-system-arm -M beagle -mtdblock /work/tianocore/Build/BeagleBoard/DEBUG_ARMGCC/FV/BeagleBoard_EFI_flashboot.fd -serial stdio -sd /work/linaro-image-tools-0.4.8/beagle_sd.img
  67
  68 Start UEFI from SD card :
  69 -------------------------
  70 # To replace u-boot by uefi in the SD card
  71 1) Build the BeagleBoard UEFI firmware without the OMAP353x header
  72 cd $(WORKROOT)/edk2/BeagleBoardPkg/
  73 ./build.sh -D EDK2_SECOND_STAGE_BOOTOLADER=1
  74
  75 2) Replace u-boot by UEFI
  76 sudo mount -o loop,offset=$[63*512] $(WORKROOT)/beagle_image/beagle_sd.img /tmp/beagle_img1
  77 sudo cp ../Build/BeagleBoard/DEBUG_ARMGCC/FV/BEAGLEBOARD_EFI.fd /tmp/beagle_img1/u-boot.bin
  78 sudo umount /tmp/beagle_img1