MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h

   1 /** @file
   2   Header file for AHCI mode of ATA host controller.
   3
   4   Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
   5   This program and the accompanying materials
   6   are licensed and made available under the terms and conditions of the BSD License
   7   which accompanies this distribution.  The full text of the license may be found at
   8   http://opensource.org/licenses/bsd-license.php
   9
  10   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12
  13 **/
  14 #ifndef __ATA_HC_AHCI_MODE_H__
  15 #define __ATA_HC_AHCI_MODE_H__
  16
  17 #define EFI_AHCI_BAR_INDEX                     0x05
  18
  19 #define EFI_AHCI_CAPABILITY_OFFSET             0x0000
  20 #define   EFI_AHCI_CAP_SAM                     BIT18
  21 #define   EFI_AHCI_CAP_SSS                     BIT27
  22 #define   EFI_AHCI_CAP_S64A                    BIT31
  23 #define EFI_AHCI_GHC_OFFSET                    0x0004
  24 #define   EFI_AHCI_GHC_RESET                   BIT0
  25 #define   EFI_AHCI_GHC_IE                      BIT1
  26 #define   EFI_AHCI_GHC_ENABLE                  BIT31
  27 #define EFI_AHCI_IS_OFFSET                     0x0008
  28 #define EFI_AHCI_PI_OFFSET                     0x000C
  29
  30 #define EFI_AHCI_MAX_PORTS                     32
  31
  32 typedef struct {
  33   UINT32  Lower32;
  34   UINT32  Upper32;
  35 } DATA_32;
  36
  37 typedef union {
  38   DATA_32   Uint32;
  39   UINT64    Uint64;
  40 } DATA_64;
  41
  42 //
  43 // Refer SATA1.0a spec section 5.2, the Phy detection time should be less than 10ms.
  44 // Add a bit of margin for robustness.
  45 //
  46 #define  EFI_AHCI_BUS_PHY_DETECT_TIMEOUT       15
  47 //
  48 // Refer SATA1.0a spec, the FIS enable time should be less than 500ms.
  49 //
  50 #define  EFI_AHCI_PORT_CMD_FR_CLEAR_TIMEOUT    EFI_TIMER_PERIOD_MILLISECONDS(500)
  51 //
  52 // Refer SATA1.0a spec, the bus reset time should be less than 1s.
  53 //
  54 #define  EFI_AHCI_BUS_RESET_TIMEOUT            EFI_TIMER_PERIOD_SECONDS(1)
  55
  56 #define  EFI_AHCI_ATAPI_DEVICE_SIG             0xEB140000
  57 #define  EFI_AHCI_ATA_DEVICE_SIG               0x00000000
  58 #define  EFI_AHCI_PORT_MULTIPLIER_SIG          0x96690000
  59 #define  EFI_AHCI_ATAPI_SIG_MASK               0xFFFF0000
  60
  61 //
  62 // Each PRDT entry can point to a memory block up to 4M byte
  63 //
  64 #define EFI_AHCI_MAX_DATA_PER_PRDT             0x400000
  65
  66 #define EFI_AHCI_FIS_REGISTER_H2D              0x27      //Register FIS - Host to Device
  67 #define   EFI_AHCI_FIS_REGISTER_H2D_LENGTH     20
  68 #define EFI_AHCI_FIS_REGISTER_D2H              0x34      //Register FIS - Device to Host
  69 #define   EFI_AHCI_FIS_REGISTER_D2H_LENGTH     20
  70 #define EFI_AHCI_FIS_DMA_ACTIVATE              0x39      //DMA Activate FIS - Device to Host
  71 #define   EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH     4
  72 #define EFI_AHCI_FIS_DMA_SETUP                 0x41      //DMA Setup FIS - Bi-directional
  73 #define   EFI_AHCI_FIS_DMA_SETUP_LENGTH        28
  74 #define EFI_AHCI_FIS_DATA                      0x46      //Data FIS - Bi-directional
  75 #define EFI_AHCI_FIS_BIST                      0x58      //BIST Activate FIS - Bi-directional
  76 #define   EFI_AHCI_FIS_BIST_LENGTH             12
  77 #define EFI_AHCI_FIS_PIO_SETUP                 0x5F      //PIO Setup FIS - Device to Host
  78 #define   EFI_AHCI_FIS_PIO_SETUP_LENGTH        20
  79 #define EFI_AHCI_FIS_SET_DEVICE                0xA1      //Set Device Bits FIS - Device to Host
  80 #define   EFI_AHCI_FIS_SET_DEVICE_LENGTH       8
  81
  82 #define EFI_AHCI_D2H_FIS_OFFSET                0x40
  83 #define EFI_AHCI_DMA_FIS_OFFSET                0x00
  84 #define EFI_AHCI_PIO_FIS_OFFSET                0x20
  85 #define EFI_AHCI_SDB_FIS_OFFSET                0x58
  86 #define EFI_AHCI_FIS_TYPE_MASK                 0xFF
  87 #define EFI_AHCI_U_FIS_OFFSET                  0x60
  88
  89 //
  90 // Port register
  91 //
  92 #define EFI_AHCI_PORT_START                    0x0100
  93 #define EFI_AHCI_PORT_REG_WIDTH                0x0080
  94 #define EFI_AHCI_PORT_CLB                      0x0000
  95 #define EFI_AHCI_PORT_CLBU                     0x0004
  96 #define EFI_AHCI_PORT_FB                       0x0008
  97 #define EFI_AHCI_PORT_FBU                      0x000C
  98 #define EFI_AHCI_PORT_IS                       0x0010
  99 #define   EFI_AHCI_PORT_IS_DHRS                BIT0
 100 #define   EFI_AHCI_PORT_IS_PSS                 BIT1
 101 #define   EFI_AHCI_PORT_IS_SSS                 BIT2
 102 #define   EFI_AHCI_PORT_IS_SDBS                BIT3
 103 #define   EFI_AHCI_PORT_IS_UFS                 BIT4
 104 #define   EFI_AHCI_PORT_IS_DPS                 BIT5
 105 #define   EFI_AHCI_PORT_IS_PCS                 BIT6
 106 #define   EFI_AHCI_PORT_IS_DIS                 BIT7
 107 #define   EFI_AHCI_PORT_IS_PRCS                BIT22
 108 #define   EFI_AHCI_PORT_IS_IPMS                BIT23
 109 #define   EFI_AHCI_PORT_IS_OFS                 BIT24
 110 #define   EFI_AHCI_PORT_IS_INFS                BIT26
 111 #define   EFI_AHCI_PORT_IS_IFS                 BIT27
 112 #define   EFI_AHCI_PORT_IS_HBDS                BIT28
 113 #define   EFI_AHCI_PORT_IS_HBFS                BIT29
 114 #define   EFI_AHCI_PORT_IS_TFES                BIT30
 115 #define   EFI_AHCI_PORT_IS_CPDS                BIT31
 116 #define   EFI_AHCI_PORT_IS_CLEAR               0xFFFFFFFF
 117 #define   EFI_AHCI_PORT_IS_FIS_CLEAR           0x0000000F
 118
 119 #define EFI_AHCI_PORT_IE                       0x0014
 120 #define EFI_AHCI_PORT_CMD                      0x0018
 121 #define   EFI_AHCI_PORT_CMD_ST_MASK            0xFFFFFFFE
 122 #define   EFI_AHCI_PORT_CMD_ST                 BIT0
 123 #define   EFI_AHCI_PORT_CMD_SUD                BIT1
 124 #define   EFI_AHCI_PORT_CMD_POD                BIT2
 125 #define   EFI_AHCI_PORT_CMD_CLO                BIT3
 126 #define   EFI_AHCI_PORT_CMD_CR                 BIT15
 127 #define   EFI_AHCI_PORT_CMD_FRE                BIT4
 128 #define   EFI_AHCI_PORT_CMD_FR                 BIT14
 129 #define   EFI_AHCI_PORT_CMD_MASK               ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE | EFI_AHCI_PORT_CMD_COL)
 130 #define   EFI_AHCI_PORT_CMD_PMA                BIT17
 131 #define   EFI_AHCI_PORT_CMD_HPCP               BIT18
 132 #define   EFI_AHCI_PORT_CMD_MPSP               BIT19
 133 #define   EFI_AHCI_PORT_CMD_CPD                BIT20
 134 #define   EFI_AHCI_PORT_CMD_ESP                BIT21
 135 #define   EFI_AHCI_PORT_CMD_ATAPI              BIT24
 136 #define   EFI_AHCI_PORT_CMD_DLAE               BIT25
 137 #define   EFI_AHCI_PORT_CMD_ALPE               BIT26
 138 #define   EFI_AHCI_PORT_CMD_ASP                BIT27
 139 #define   EFI_AHCI_PORT_CMD_ICC_MASK           (BIT28 | BIT29 | BIT30 | BIT31)
 140 #define   EFI_AHCI_PORT_CMD_ACTIVE             (1 << 28 )
 141 #define EFI_AHCI_PORT_TFD                      0x0020
 142 #define   EFI_AHCI_PORT_TFD_MASK               (BIT7 | BIT3 | BIT0)
 143 #define   EFI_AHCI_PORT_TFD_BSY                BIT7
 144 #define   EFI_AHCI_PORT_TFD_DRQ                BIT3
 145 #define   EFI_AHCI_PORT_TFD_ERR                BIT0
 146 #define   EFI_AHCI_PORT_TFD_ERR_MASK           0x00FF00
 147 #define EFI_AHCI_PORT_SIG                      0x0024
 148 #define EFI_AHCI_PORT_SSTS                     0x0028
 149 #define   EFI_AHCI_PORT_SSTS_DET_MASK          0x000F
 150 #define   EFI_AHCI_PORT_SSTS_DET               0x0001
 151 #define   EFI_AHCI_PORT_SSTS_DET_PCE           0x0003
 152 #define   EFI_AHCI_PORT_SSTS_SPD_MASK          0x00F0
 153 #define EFI_AHCI_PORT_SCTL                     0x002C
 154 #define   EFI_AHCI_PORT_SCTL_DET_MASK          0x000F
 155 #define   EFI_AHCI_PORT_SCTL_MASK              (~EFI_AHCI_PORT_SCTL_DET_MASK)
 156 #define   EFI_AHCI_PORT_SCTL_DET_INIT          0x0001
 157 #define   EFI_AHCI_PORT_SCTL_DET_PHYCOMM       0x0003
 158 #define   EFI_AHCI_PORT_SCTL_SPD_MASK          0x00F0
 159 #define   EFI_AHCI_PORT_SCTL_IPM_MASK          0x0F00
 160 #define   EFI_AHCI_PORT_SCTL_IPM_INIT          0x0300
 161 #define   EFI_AHCI_PORT_SCTL_IPM_PSD           0x0100
 162 #define   EFI_AHCI_PORT_SCTL_IPM_SSD           0x0200
 163 #define EFI_AHCI_PORT_SERR                     0x0030
 164 #define   EFI_AHCI_PORT_SERR_RDIE              BIT0
 165 #define   EFI_AHCI_PORT_SERR_RCE               BIT1
 166 #define   EFI_AHCI_PORT_SERR_TDIE              BIT8
 167 #define   EFI_AHCI_PORT_SERR_PCDIE             BIT9
 168 #define   EFI_AHCI_PORT_SERR_PE                BIT10
 169 #define   EFI_AHCI_PORT_SERR_IE                BIT11
 170 #define   EFI_AHCI_PORT_SERR_PRC               BIT16
 171 #define   EFI_AHCI_PORT_SERR_PIE               BIT17
 172 #define   EFI_AHCI_PORT_SERR_CW                BIT18
 173 #define   EFI_AHCI_PORT_SERR_BDE               BIT19
 174 #define   EFI_AHCI_PORT_SERR_DE                BIT20
 175 #define   EFI_AHCI_PORT_SERR_CRCE              BIT21
 176 #define   EFI_AHCI_PORT_SERR_HE                BIT22
 177 #define   EFI_AHCI_PORT_SERR_LSE               BIT23
 178 #define   EFI_AHCI_PORT_SERR_TSTE              BIT24
 179 #define   EFI_AHCI_PORT_SERR_UFT               BIT25
 180 #define   EFI_AHCI_PORT_SERR_EX                BIT26
 181 #define   EFI_AHCI_PORT_ERR_CLEAR              0xFFFFFFFF
 182 #define EFI_AHCI_PORT_SACT                     0x0034
 183 #define EFI_AHCI_PORT_CI                       0x0038
 184 #define EFI_AHCI_PORT_SNTF                     0x003C
 185
 186
 187 #pragma pack(1)
 188 //
 189 // Command List structure includes total 32 entries.
 190 // The entry data structure is listed at the following.
 191 //
 192 typedef struct {
 193   UINT32   AhciCmdCfl:5;      //Command FIS Length
 194   UINT32   AhciCmdA:1;        //ATAPI
 195   UINT32   AhciCmdW:1;        //Write
 196   UINT32   AhciCmdP:1;        //Prefetchable
 197   UINT32   AhciCmdR:1;        //Reset
 198   UINT32   AhciCmdB:1;        //BIST
 199   UINT32   AhciCmdC:1;        //Clear Busy upon R_OK
 200   UINT32   AhciCmdRsvd:1;
 201   UINT32   AhciCmdPmp:4;      //Port Multiplier Port
 202   UINT32   AhciCmdPrdtl:16;   //Physical Region Descriptor Table Length
 203   UINT32   AhciCmdPrdbc;      //Physical Region Descriptor Byte Count
 204   UINT32   AhciCmdCtba;       //Command Table Descriptor Base Address
 205   UINT32   AhciCmdCtbau;      //Command Table Descriptor Base Address Upper 32-BITs
 206   UINT32   AhciCmdRsvd1[4];
 207 } EFI_AHCI_COMMAND_LIST;
 208
 209 //
 210 // This is a software constructed FIS.
 211 // For data transfer operations, this is the H2D Register FIS format as
 212 // specified in the Serial ATA Revision 2.6 specification.
 213 //
 214 typedef struct {
 215   UINT8    AhciCFisType;
 216   UINT8    AhciCFisPmNum:4;
 217   UINT8    AhciCFisRsvd:1;
 218   UINT8    AhciCFisRsvd1:1;
 219   UINT8    AhciCFisRsvd2:1;
 220   UINT8    AhciCFisCmdInd:1;
 221   UINT8    AhciCFisCmd;
 222   UINT8    AhciCFisFeature;
 223   UINT8    AhciCFisSecNum;
 224   UINT8    AhciCFisClyLow;
 225   UINT8    AhciCFisClyHigh;
 226   UINT8    AhciCFisDevHead;
 227   UINT8    AhciCFisSecNumExp;
 228   UINT8    AhciCFisClyLowExp;
 229   UINT8    AhciCFisClyHighExp;
 230   UINT8    AhciCFisFeatureExp;
 231   UINT8    AhciCFisSecCount;
 232   UINT8    AhciCFisSecCountExp;
 233   UINT8    AhciCFisRsvd3;
 234   UINT8    AhciCFisControl;
 235   UINT8    AhciCFisRsvd4[4];
 236   UINT8    AhciCFisRsvd5[44];
 237 } EFI_AHCI_COMMAND_FIS;
 238
 239 //
 240 // ACMD: ATAPI command (12 or 16 bytes)
 241 //
 242 typedef struct {
 243   UINT8    AtapiCmd[0x10];
 244 } EFI_AHCI_ATAPI_COMMAND;
 245
 246 //
 247 // Physical Region Descriptor Table includes up to 65535 entries
 248 // The entry data structure is listed at the following.
 249 // the actual entry number comes from the PRDTL field in the command
 250 // list entry for this command slot.
 251 //
 252 typedef struct {
 253   UINT32   AhciPrdtDba;       //Data Base Address
 254   UINT32   AhciPrdtDbau;      //Data Base Address Upper 32-BITs
 255   UINT32   AhciPrdtRsvd;
 256   UINT32   AhciPrdtDbc:22;    //Data Byte Count
 257   UINT32   AhciPrdtRsvd1:9;
 258   UINT32   AhciPrdtIoc:1;     //Interrupt on Completion
 259 } EFI_AHCI_COMMAND_PRDT;
 260
 261 //
 262 // Command table data strucute which is pointed to by the entry in the command list
 263 //
 264 typedef struct {
 265   EFI_AHCI_COMMAND_FIS      CommandFis;       // A software constructed FIS.
 266   EFI_AHCI_ATAPI_COMMAND    AtapiCmd;         // 12 or 16 bytes ATAPI cmd.
 267   UINT8                     Reserved[0x30];
 268   EFI_AHCI_COMMAND_PRDT     PrdtTable[65535];     // The scatter/gather list for data transfer
 269 } EFI_AHCI_COMMAND_TABLE;
 270
 271 //
 272 // Received FIS structure
 273 //
 274 typedef struct {
 275   UINT8    AhciDmaSetupFis[0x1C];         // Dma Setup Fis: offset 0x00
 276   UINT8    AhciDmaSetupFisRsvd[0x04];
 277   UINT8    AhciPioSetupFis[0x14];         // Pio Setup Fis: offset 0x20
 278   UINT8    AhciPioSetupFisRsvd[0x0C];
 279   UINT8    AhciD2HRegisterFis[0x14];      // D2H Register Fis: offset 0x40
 280   UINT8    AhciD2HRegisterFisRsvd[0x04];
 281   UINT64   AhciSetDeviceBitsFis;          // Set Device Bits Fix: offset 0x58
 282   UINT8    AhciUnknownFis[0x40];          // Unkonwn Fis: offset 0x60
 283   UINT8    AhciUnknownFisRsvd[0x60];
 284 } EFI_AHCI_RECEIVED_FIS;
 285
 286 #pragma pack()
 287
 288 typedef struct {
 289   EFI_AHCI_RECEIVED_FIS     *AhciRFis;
 290   EFI_AHCI_COMMAND_LIST     *AhciCmdList;
 291   EFI_AHCI_COMMAND_TABLE    *AhciCommandTable;
 292   EFI_AHCI_RECEIVED_FIS     *AhciRFisPciAddr;
 293   EFI_AHCI_COMMAND_LIST     *AhciCmdListPciAddr;
 294   EFI_AHCI_COMMAND_TABLE    *AhciCommandTablePciAddr;
 295   UINT64                    MaxCommandListSize;
 296   UINT64                    MaxCommandTableSize;
 297   UINT64                    MaxReceiveFisSize;
 298   VOID                      *MapRFis;
 299   VOID                      *MapCmdList;
 300   VOID                      *MapCommandTable;
 301 } EFI_AHCI_REGISTERS;
 302
 303 /**
 304   This function is used to send out ATAPI commands conforms to the Packet Command
 305   with PIO Protocol.
 306
 307   @param PciIo              The PCI IO protocol instance.
 308   @param AhciRegisters      The pointer to the EFI_AHCI_REGISTERS.
 309   @param Port               The number of port.
 310   @param PortMultiplier     The number of port multiplier.
 311   @param Packet             A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure.
 312
 313   @retval EFI_SUCCESS       send out the ATAPI packet command successfully
 314                             and device sends data successfully.
 315   @retval EFI_DEVICE_ERROR  the device failed to send data.
 316
 317 **/
 318 EFI_STATUS
 319 EFIAPI
 320 AhciPacketCommandExecute (
 321   IN  EFI_PCI_IO_PROTOCOL                           *PciIo,
 322   IN  EFI_AHCI_REGISTERS                            *AhciRegisters,
 323   IN  UINT8                                         Port,
 324   IN  UINT8                                         PortMultiplier,
 325   IN  EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET    *Packet
 326   );
 327
 328 /**
 329   Start command for give slot on specific port.
 330
 331   @param  PciIo              The PCI IO protocol instance.
 332   @param  Port               The number of port.
 333   @param  CommandSlot        The number of CommandSlot.
 334   @param  Timeout            The timeout value of start, uses 100ns as a unit.
 335
 336   @retval EFI_DEVICE_ERROR   The command start unsuccessfully.
 337   @retval EFI_TIMEOUT        The operation is time out.
 338   @retval EFI_SUCCESS        The command start successfully.
 339
 340 **/
 341 EFI_STATUS
 342 EFIAPI
 343 AhciStartCommand (
 344   IN  EFI_PCI_IO_PROTOCOL       *PciIo,
 345   IN  UINT8                     Port,
 346   IN  UINT8                     CommandSlot,
 347   IN  UINT64                    Timeout
 348   );
 349
 350 /**
 351   Stop command running for giving port
 352
 353   @param  PciIo              The PCI IO protocol instance.
 354   @param  Port               The number of port.
 355   @param  Timeout            The timeout value of stop, uses 100ns as a unit.
 356
 357   @retval EFI_DEVICE_ERROR   The command stop unsuccessfully.
 358   @retval EFI_TIMEOUT        The operation is time out.
 359   @retval EFI_SUCCESS        The command stop successfully.
 360
 361 **/
 362 EFI_STATUS
 363 EFIAPI
 364 AhciStopCommand (
 365   IN  EFI_PCI_IO_PROTOCOL       *PciIo,
 366   IN  UINT8                     Port,
 367   IN  UINT64                    Timeout
 368   );
 369
 370 #endif
 371