]> git.proxmox.com Git - mirror_edk2.git/blob - MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c
projects / mirror_edk2.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
MdeModulePkg/Bus: Fix typos in comments
[mirror_edk2.git] / MdeModulePkg / Bus / Ata / AtaAtapiPassThru / AtaAtapiPassThru.c
1 /** @file
2 This file implements ATA_PASSTHRU_PROCTOCOL and EXT_SCSI_PASSTHRU_PROTOCOL interfaces
3 for managed ATA controllers.
4
5 Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution. The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php
10
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
13
14 **/
15
16 #include "AtaAtapiPassThru.h"
17
18 //
19 // EFI_DRIVER_BINDING_PROTOCOL instance
20 //
21 EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding = {
22 AtaAtapiPassThruSupported,
23 AtaAtapiPassThruStart,
24 AtaAtapiPassThruStop,
25 0x10,
26 NULL,
27 NULL
28 };
29
30 ATA_ATAPI_PASS_THRU_INSTANCE gAtaAtapiPassThruInstanceTemplate = {
31 ATA_ATAPI_PASS_THRU_SIGNATURE,
32 0, // Controller Handle
33 NULL, // PciIo Protocol
34 NULL, // IdeControllerInit Protocol
35 { // AtaPassThruMode
36 //
37 // According to UEFI2.3 spec Section 12.10, Drivers for non-RAID ATA controllers should set
38 // both EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL and EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL
39 // bits.
40 // Note that the driver doesn't support AtaPassThru non blocking I/O.
41 //
42 EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL | EFI_ATA_PASS_THRU_ATTRIBUTES_NONBLOCKIO,
43 //
44 // IoAlign
45 //
46 sizeof (UINTN)
47 },
48 { // AtaPassThru
49 NULL,
50 AtaPassThruPassThru,
51 AtaPassThruGetNextPort,
52 AtaPassThruGetNextDevice,
53 AtaPassThruBuildDevicePath,
54 AtaPassThruGetDevice,
55 AtaPassThruResetPort,
56 AtaPassThruResetDevice
57 },
58 { // ExtScsiPassThruMode
59 //
60 // AdapterId
61 //
62 0,
63 //
64 // According to UEFI2.3 spec Section 14.7, Drivers for non-RAID SCSI controllers should set
65 // both EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL and EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL
66 // bits.
67 // Note that the driver doesn't support ExtScsiPassThru non blocking I/O.
68 //
69 EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL,
70 //
71 // IoAlign
72 //
73 sizeof (UINTN)
74 },
75 { // ExtScsiPassThru
76 NULL,
77 ExtScsiPassThruPassThru,
78 ExtScsiPassThruGetNextTargetLun,
79 ExtScsiPassThruBuildDevicePath,
80 ExtScsiPassThruGetTargetLun,
81 ExtScsiPassThruResetChannel,
82 ExtScsiPassThruResetTargetLun,
83 ExtScsiPassThruGetNextTarget
84 },
85 EfiAtaUnknownMode, // Work Mode
86 { // IdeRegisters
87 {0},
88 {0}
89 },
90 { // AhciRegisters
91 0
92 },
93 { // DeviceList
94 NULL,
95 NULL
96 },
97 0, // OriginalAttributes
98 0, // PreviousPort
99 0, // PreviousPortMultiplier
100 0, // PreviousTargetId
101 0, // PreviousLun
102 NULL, // Timer event
103 { // NonBlocking TaskList
104 NULL,
105 NULL
106 }
107 };
108
109 ATAPI_DEVICE_PATH mAtapiDevicePathTemplate = {
110 {
111 MESSAGING_DEVICE_PATH,
112 MSG_ATAPI_DP,
113 {
114 (UINT8) (sizeof (ATAPI_DEVICE_PATH)),
115 (UINT8) ((sizeof (ATAPI_DEVICE_PATH)) >> 8)
116 }
117 },
118 0,
119 0,
120 0
121 };
122
123 SATA_DEVICE_PATH mSataDevicePathTemplate = {
124 {
125 MESSAGING_DEVICE_PATH,
126 MSG_SATA_DP,
127 {
128 (UINT8) (sizeof (SATA_DEVICE_PATH)),
129 (UINT8) ((sizeof (SATA_DEVICE_PATH)) >> 8)
130 }
131 },
132 0,
133 0,
134 0
135 };
136
137 UINT8 mScsiId[TARGET_MAX_BYTES] = {
138 0xFF, 0xFF, 0xFF, 0xFF,
139 0xFF, 0xFF, 0xFF, 0xFF,
140 0xFF, 0xFF, 0xFF, 0xFF,
141 0xFF, 0xFF, 0xFF, 0xFF
142 };
143
144 /**
145 Sends an ATA command to an ATA device that is attached to the ATA controller. This function
146 supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
147 and the non-blocking I/O functionality is optional.
148
149 @param[in] Port The port number of the ATA device to send the command.
150 @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
151 If there is no port multiplier, then specify 0xFFFF.
152 @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
153 and PortMultiplierPort.
154 @param[in] Instance Pointer to the ATA_ATAPI_PASS_THRU_INSTANCE.
155 @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
156 used by non-blocking mode.
157
158 @retval EFI_SUCCESS The ATA command was sent by the host. For
159 bi-directional commands, InTransferLength bytes
160 were transferred from InDataBuffer. For
161 write and bi-directional commands, OutTransferLength
162 bytes were transferred by OutDataBuffer.
163 @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number
164 of bytes that could be transferred is returned
165 in InTransferLength. For write and bi-directional
166 commands, OutTransferLength bytes were transferred
167 by OutDataBuffer.
168 @retval EFI_NOT_READY The ATA command could not be sent because
169 there are too many ATA commands already
170 queued. The caller may retry again later.
171 @retval EFI_DEVICE_ERROR A device error occurred while attempting
172 to send the ATA command.
173 @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents
174 of Acb are invalid. The ATA command was
175 not sent, so no additional status information
176 is available.
177
178 **/
179 EFI_STATUS
180 EFIAPI
181 AtaPassThruPassThruExecute (
182 IN UINT16 Port,
183 IN UINT16 PortMultiplierPort,
184 IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
185 IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
186 IN ATA_NONBLOCK_TASK *Task OPTIONAL
187 )
188 {
189 EFI_ATA_PASS_THRU_CMD_PROTOCOL Protocol;
190 EFI_ATA_HC_WORK_MODE Mode;
191 EFI_STATUS Status;
192
193 Protocol = Packet->Protocol;
194
195 Mode = Instance->Mode;
196 switch (Mode) {
197 case EfiAtaIdeMode:
198 //
199 // Reassign IDE mode io port registers' base addresses
200 //
201 Status = GetIdeRegisterIoAddr (Instance->PciIo, Instance->IdeRegisters);
202
203 if (EFI_ERROR (Status)) {
204 return Status;
205 }
206
207 switch (Protocol) {
208 case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA:
209 Status = AtaNonDataCommandIn (
210 Instance->PciIo,
211 &Instance->IdeRegisters[Port],
212 Packet->Acb,
213 Packet->Asb,
214 Packet->Timeout,
215 Task
216 );
217 break;
218 case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN:
219 Status = AtaPioDataInOut (
220 Instance->PciIo,
221 &Instance->IdeRegisters[Port],
222 Packet->InDataBuffer,
223 Packet->InTransferLength,
224 TRUE,
225 Packet->Acb,
226 Packet->Asb,
227 Packet->Timeout,
228 Task
229 );
230 break;
231 case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT:
232 Status = AtaPioDataInOut (
233 Instance->PciIo,
234 &Instance->IdeRegisters[Port],
235 Packet->OutDataBuffer,
236 Packet->OutTransferLength,
237 FALSE,
238 Packet->Acb,
239 Packet->Asb,
240 Packet->Timeout,
241 Task
242 );
243 break;
244 case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN:
245 Status = AtaUdmaInOut (
246 Instance,
247 &Instance->IdeRegisters[Port],
248 TRUE,
249 Packet->InDataBuffer,
250 Packet->InTransferLength,
251 Packet->Acb,
252 Packet->Asb,
253 Packet->Timeout,
254 Task
255 );
256 break;
257 case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT:
258 Status = AtaUdmaInOut (
259 Instance,
260 &Instance->IdeRegisters[Port],
261 FALSE,
262 Packet->OutDataBuffer,
263 Packet->OutTransferLength,
264 Packet->Acb,
265 Packet->Asb,
266 Packet->Timeout,
267 Task
268 );
269 break;
270 default :
271 return EFI_UNSUPPORTED;
272 }
273 break;
274 case EfiAtaAhciMode :
275 if (PortMultiplierPort == 0xFFFF) {
276 //
277 // If there is no port multiplier, PortMultiplierPort will be 0xFFFF
278 // according to UEFI spec. Here, we convert its value to 0 to follow
279 // AHCI spec.
280 //
281 PortMultiplierPort = 0;
282 }
283 switch (Protocol) {
284 case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA:
285 Status = AhciNonDataTransfer (
286 Instance->PciIo,
287 &Instance->AhciRegisters,
288 (UINT8)Port,
289 (UINT8)PortMultiplierPort,
290 NULL,
291 0,
292 Packet->Acb,
293 Packet->Asb,
294 Packet->Timeout,
295 Task
296 );
297 break;
298 case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN:
299 Status = AhciPioTransfer (
300 Instance->PciIo,
301 &Instance->AhciRegisters,
302 (UINT8)Port,
303 (UINT8)PortMultiplierPort,
304 NULL,
305 0,
306 TRUE,
307 Packet->Acb,
308 Packet->Asb,
309 Packet->InDataBuffer,
310 Packet->InTransferLength,
311 Packet->Timeout,
312 Task
313 );
314 break;
315 case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT:
316 Status = AhciPioTransfer (
317 Instance->PciIo,
318 &Instance->AhciRegisters,
319 (UINT8)Port,
320 (UINT8)PortMultiplierPort,
321 NULL,
322 0,
323 FALSE,
324 Packet->Acb,
325 Packet->Asb,
326 Packet->OutDataBuffer,
327 Packet->OutTransferLength,
328 Packet->Timeout,
329 Task
330 );
331 break;
332 case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN:
333 Status = AhciDmaTransfer (
334 Instance,
335 &Instance->AhciRegisters,
336 (UINT8)Port,
337 (UINT8)PortMultiplierPort,
338 NULL,
339 0,
340 TRUE,
341 Packet->Acb,
342 Packet->Asb,
343 Packet->InDataBuffer,
344 Packet->InTransferLength,
345 Packet->Timeout,
346 Task
347 );
348 break;
349 case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT:
350 Status = AhciDmaTransfer (
351 Instance,
352 &Instance->AhciRegisters,
353 (UINT8)Port,
354 (UINT8)PortMultiplierPort,
355 NULL,
356 0,
357 FALSE,
358 Packet->Acb,
359 Packet->Asb,
360 Packet->OutDataBuffer,
361 Packet->OutTransferLength,
362 Packet->Timeout,
363 Task
364 );
365 break;
366 default :
367 return EFI_UNSUPPORTED;
368 }
369 break;
370
371 default:
372 Status = EFI_DEVICE_ERROR;
373 break;
374 }
375
376 return Status;
377 }
378
379 /**
380 Call back function when the timer event is signaled.
381
382 @param[in] Event The Event this notify function registered to.
383 @param[in] Context Pointer to the context data registered to the
384 Event.
385
386 **/
387 VOID
388 EFIAPI
389 AsyncNonBlockingTransferRoutine (
390 EFI_EVENT Event,
391 VOID* Context
392 )
393 {
394 LIST_ENTRY *Entry;
395 LIST_ENTRY *EntryHeader;
396 ATA_NONBLOCK_TASK *Task;
397 EFI_STATUS Status;
398 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
399
400 Instance = (ATA_ATAPI_PASS_THRU_INSTANCE *) Context;
401 EntryHeader = &Instance->NonBlockingTaskList;
402 //
403 // Get the Taks from the Taks List and execute it, until there is
404 // no task in the list or the device is busy with task (EFI_NOT_READY).
405 //
406 while (TRUE) {
407 if (!IsListEmpty (EntryHeader)) {
408 Entry = GetFirstNode (EntryHeader);
409 Task = ATA_NON_BLOCK_TASK_FROM_ENTRY (Entry);
410 } else {
411 return;
412 }
413
414 Status = AtaPassThruPassThruExecute (
415 Task->Port,
416 Task->PortMultiplier,
417 Task->Packet,
418 Instance,
419 Task
420 );
421
422 //
423 // If the data transfer meet a error, remove all tasks in the list since these tasks are
424 // associated with one task from Ata Bus and signal the event with error status.
425 //
426 if ((Status != EFI_NOT_READY) && (Status != EFI_SUCCESS)) {
427 DestroyAsynTaskList (Instance, TRUE);
428 break;
429 }
430
431 //
432 // For Non blocking mode, the Status of EFI_NOT_READY means the operation
433 // is not finished yet. Otherwise the operation is successful.
434 //
435 if (Status == EFI_NOT_READY) {
436 break;
437 } else {
438 RemoveEntryList (&Task->Link);
439 gBS->SignalEvent (Task->Event);
440 FreePool (Task);
441 }
442 }
443 }
444
445 /**
446 The Entry Point of module.
447
448 @param[in] ImageHandle The firmware allocated handle for the EFI image.
449 @param[in] SystemTable A pointer to the EFI System Table.
450
451 @retval EFI_SUCCESS The entry point is executed successfully.
452 @retval other Some error occurs when executing this entry point.
453
454 **/
455 EFI_STATUS
456 EFIAPI
457 InitializeAtaAtapiPassThru (
458 IN EFI_HANDLE ImageHandle,
459 IN EFI_SYSTEM_TABLE *SystemTable
460 )
461 {
462 EFI_STATUS Status;
463
464 //
465 // Install driver model protocol(s).
466 //
467 Status = EfiLibInstallDriverBindingComponentName2 (
468 ImageHandle,
469 SystemTable,
470 &gAtaAtapiPassThruDriverBinding,
471 ImageHandle,
472 &gAtaAtapiPassThruComponentName,
473 &gAtaAtapiPassThruComponentName2
474 );
475 ASSERT_EFI_ERROR (Status);
476
477 return Status;
478 }
479
480 /**
481 Tests to see if this driver supports a given controller. If a child device is provided,
482 it further tests to see if this driver supports creating a handle for the specified child device.
483
484 This function checks to see if the driver specified by This supports the device specified by
485 ControllerHandle. Drivers will typically use the device path attached to
486 ControllerHandle and/or the services from the bus I/O abstraction attached to
487 ControllerHandle to determine if the driver supports ControllerHandle. This function
488 may be called many times during platform initialization. In order to reduce boot times, the tests
489 performed by this function must be very small, and take as little time as possible to execute. This
490 function must not change the state of any hardware devices, and this function must be aware that the
491 device specified by ControllerHandle may already be managed by the same driver or a
492 different driver. This function must match its calls to AllocatePages() with FreePages(),
493 AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
494 Because ControllerHandle may have been previously started by the same driver, if a protocol is
495 already in the opened state, then it must not be closed with CloseProtocol(). This is required
496 to guarantee the state of ControllerHandle is not modified by this function.
497
498 @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
499 @param[in] ControllerHandle The handle of the controller to test. This handle
500 must support a protocol interface that supplies
501 an I/O abstraction to the driver.
502 @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
503 parameter is ignored by device drivers, and is optional for bus
504 drivers. For bus drivers, if this parameter is not NULL, then
505 the bus driver must determine if the bus controller specified
506 by ControllerHandle and the child controller specified
507 by RemainingDevicePath are both supported by this
508 bus driver.
509
510 @retval EFI_SUCCESS The device specified by ControllerHandle and
511 RemainingDevicePath is supported by the driver specified by This.
512 @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
513 RemainingDevicePath is already being managed by the driver
514 specified by This.
515 @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
516 RemainingDevicePath is already being managed by a different
517 driver or an application that requires exclusive access.
518 Currently not implemented.
519 @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
520 RemainingDevicePath is not supported by the driver specified by This.
521 **/
522 EFI_STATUS
523 EFIAPI
524 AtaAtapiPassThruSupported (
525 IN EFI_DRIVER_BINDING_PROTOCOL *This,
526 IN EFI_HANDLE Controller,
527 IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
528 )
529 {
530 EFI_STATUS Status;
531 EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
532 EFI_PCI_IO_PROTOCOL *PciIo;
533 PCI_TYPE00 PciData;
534 EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
535
536 //
537 // SATA Controller is a device driver, and should ingore the
538 // "RemainingDevicePath" according to UEFI spec
539 //
540 Status = gBS->OpenProtocol (
541 Controller,
542 &gEfiDevicePathProtocolGuid,
543 (VOID *) &ParentDevicePath,
544 This->DriverBindingHandle,
545 Controller,
546 EFI_OPEN_PROTOCOL_BY_DRIVER
547 );
548 if (EFI_ERROR (Status)) {
549 //
550 // EFI_ALREADY_STARTED is also an error
551 //
552 return Status;
553 }
554 //
555 // Close the protocol because we don't use it here
556 //
557 gBS->CloseProtocol (
558 Controller,
559 &gEfiDevicePathProtocolGuid,
560 This->DriverBindingHandle,
561 Controller
562 );
563
564 Status = gBS->OpenProtocol (
565 Controller,
566 &gEfiIdeControllerInitProtocolGuid,
567 (VOID **) &IdeControllerInit,
568 This->DriverBindingHandle,
569 Controller,
570 EFI_OPEN_PROTOCOL_BY_DRIVER
571 );
572
573 if (EFI_ERROR (Status)) {
574 //
575 // EFI_ALREADY_STARTED is also an error
576 //
577 return Status;
578 }
579
580 //
581 // Close the I/O Abstraction(s) used to perform the supported test
582 //
583 gBS->CloseProtocol (
584 Controller,
585 &gEfiIdeControllerInitProtocolGuid,
586 This->DriverBindingHandle,
587 Controller
588 );
589
590 //
591 // Now test the EfiPciIoProtocol
592 //
593 Status = gBS->OpenProtocol (
594 Controller,
595 &gEfiPciIoProtocolGuid,
596 (VOID **) &PciIo,
597 This->DriverBindingHandle,
598 Controller,
599 EFI_OPEN_PROTOCOL_GET_PROTOCOL
600 );
601 if (EFI_ERROR (Status)) {
602 return Status;
603 }
604 //
605 // Now further check the PCI header: Base class (offset 0x0B) and
606 // Sub Class (offset 0x0A). This controller should be an ATA controller
607 //
608 Status = PciIo->Pci.Read (
609 PciIo,
610 EfiPciIoWidthUint8,
611 PCI_CLASSCODE_OFFSET,
612 sizeof (PciData.Hdr.ClassCode),
613 PciData.Hdr.ClassCode
614 );
615 if (EFI_ERROR (Status)) {
616 return EFI_UNSUPPORTED;
617 }
618
619 if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {
620 return EFI_SUCCESS;
621 }
622
623 return EFI_UNSUPPORTED;
624 }
625
626 /**
627 Starts a device controller or a bus controller.
628
629 The Start() function is designed to be invoked from the EFI boot service ConnectController().
630 As a result, much of the error checking on the parameters to Start() has been moved into this
631 common boot service. It is legal to call Start() from other locations,
632 but the following calling restrictions must be followed, or the system behavior will not be deterministic.
633 1. ControllerHandle must be a valid EFI_HANDLE.
634 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
635 EFI_DEVICE_PATH_PROTOCOL.
636 3. Prior to calling Start(), the Supported() function for the driver specified by This must
637 have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
638
639 @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
640 @param[in] ControllerHandle The handle of the controller to start. This handle
641 must support a protocol interface that supplies
642 an I/O abstraction to the driver.
643 @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
644 parameter is ignored by device drivers, and is optional for bus
645 drivers. For a bus driver, if this parameter is NULL, then handles
646 for all the children of Controller are created by this driver.
647 If this parameter is not NULL and the first Device Path Node is
648 not the End of Device Path Node, then only the handle for the
649 child device specified by the first Device Path Node of
650 RemainingDevicePath is created by this driver.
651 If the first Device Path Node of RemainingDevicePath is
652 the End of Device Path Node, no child handle is created by this
653 driver.
654
655 @retval EFI_SUCCESS The device was started.
656 @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
657 @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
658 @retval Others The driver failded to start the device.
659
660 **/
661 EFI_STATUS
662 EFIAPI
663 AtaAtapiPassThruStart (
664 IN EFI_DRIVER_BINDING_PROTOCOL *This,
665 IN EFI_HANDLE Controller,
666 IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
667 )
668 {
669 EFI_STATUS Status;
670 EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
671 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
672 EFI_PCI_IO_PROTOCOL *PciIo;
673 UINT64 Supports;
674 UINT64 OriginalPciAttributes;
675
676 Status = EFI_SUCCESS;
677 IdeControllerInit = NULL;
678 Instance = NULL;
679 OriginalPciAttributes = 0;
680
681 DEBUG ((EFI_D_INFO, "==AtaAtapiPassThru Start== Controller = %x\n", Controller));
682
683 Status = gBS->OpenProtocol (
684 Controller,
685 &gEfiIdeControllerInitProtocolGuid,
686 (VOID **) &IdeControllerInit,
687 This->DriverBindingHandle,
688 Controller,
689 EFI_OPEN_PROTOCOL_BY_DRIVER
690 );
691
692 if (EFI_ERROR (Status)) {
693 DEBUG ((EFI_D_ERROR, "Open Ide_Controller_Init Error, Status=%r", Status));
694 goto ErrorExit;
695 }
696
697 Status = gBS->OpenProtocol (
698 Controller,
699 &gEfiPciIoProtocolGuid,
700 (VOID **) &PciIo,
701 This->DriverBindingHandle,
702 Controller,
703 EFI_OPEN_PROTOCOL_GET_PROTOCOL
704 );
705 if (EFI_ERROR (Status)) {
706 DEBUG ((EFI_D_ERROR, "Get Pci_Io Protocol Error, Status=%r", Status));
707 goto ErrorExit;
708 }
709
710 Status = PciIo->Attributes (
711 PciIo,
712 EfiPciIoAttributeOperationGet,
713 0,
714 &OriginalPciAttributes
715 );
716
717 if (EFI_ERROR (Status)) {
718 goto ErrorExit;
719 }
720
721 Status = PciIo->Attributes (
722 PciIo,
723 EfiPciIoAttributeOperationSupported,
724 0,
725 &Supports
726 );
727 if (!EFI_ERROR (Status)) {
728 Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
729 Status = PciIo->Attributes (
730 PciIo,
731 EfiPciIoAttributeOperationEnable,
732 Supports,
733 NULL
734 );
735 }
736
737 if (EFI_ERROR (Status)) {
738 goto ErrorExit;
739 }
740
741 //
742 // Allocate a buffer to store the ATA_ATAPI_PASS_THRU_INSTANCE data structure
743 //
744 Instance = AllocateCopyPool (sizeof (ATA_ATAPI_PASS_THRU_INSTANCE), &gAtaAtapiPassThruInstanceTemplate);
745 if (Instance == NULL) {
746 goto ErrorExit;
747 }
748
749 Instance->ControllerHandle = Controller;
750 Instance->IdeControllerInit = IdeControllerInit;
751 Instance->PciIo = PciIo;
752 Instance->OriginalPciAttributes = OriginalPciAttributes;
753 Instance->AtaPassThru.Mode = &Instance->AtaPassThruMode;
754 Instance->ExtScsiPassThru.Mode = &Instance->ExtScsiPassThruMode;
755 InitializeListHead(&Instance->DeviceList);
756 InitializeListHead(&Instance->NonBlockingTaskList);
757
758 Instance->TimerEvent = NULL;
759
760 Status = gBS->CreateEvent (
761 EVT_TIMER | EVT_NOTIFY_SIGNAL,
762 TPL_NOTIFY,
763 AsyncNonBlockingTransferRoutine,
764 Instance,
765 &Instance->TimerEvent
766 );
767 if (EFI_ERROR (Status)) {
768 goto ErrorExit;
769 }
770
771 //
772 // Set 1ms timer.
773 //
774 Status = gBS->SetTimer (Instance->TimerEvent, TimerPeriodic, 10000);
775 if (EFI_ERROR (Status)) {
776 goto ErrorExit;
777 }
778
779 //
780 // Enumerate all inserted ATA devices.
781 //
782 Status = EnumerateAttachedDevice (Instance);
783 if (EFI_ERROR (Status)) {
784 goto ErrorExit;
785 }
786
787 Status = gBS->InstallMultipleProtocolInterfaces (
788 &Controller,
789 &gEfiAtaPassThruProtocolGuid, &(Instance->AtaPassThru),
790 &gEfiExtScsiPassThruProtocolGuid, &(Instance->ExtScsiPassThru),
791 NULL
792 );
793 ASSERT_EFI_ERROR (Status);
794
795 return Status;
796
797 ErrorExit:
798 if (IdeControllerInit != NULL) {
799 gBS->CloseProtocol (
800 Controller,
801 &gEfiIdeControllerInitProtocolGuid,
802 This->DriverBindingHandle,
803 Controller
804 );
805 }
806
807 if ((Instance != NULL) && (Instance->TimerEvent != NULL)) {
808 gBS->CloseEvent (Instance->TimerEvent);
809 }
810
811 //
812 // Remove all inserted ATA devices.
813 //
814 DestroyDeviceInfoList(Instance);
815
816 if (Instance != NULL) {
817 FreePool (Instance);
818 }
819 return EFI_UNSUPPORTED;
820 }
821
822 /**
823 Stops a device controller or a bus controller.
824
825 The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
826 As a result, much of the error checking on the parameters to Stop() has been moved
827 into this common boot service. It is legal to call Stop() from other locations,
828 but the following calling restrictions must be followed, or the system behavior will not be deterministic.
829 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
830 same driver's Start() function.
831 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
832 EFI_HANDLE. In addition, all of these handles must have been created in this driver's
833 Start() function, and the Start() function must have called OpenProtocol() on
834 ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
835
836 @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
837 @param[in] ControllerHandle A handle to the device being stopped. The handle must
838 support a bus specific I/O protocol for the driver
839 to use to stop the device.
840 @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
841 @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
842 if NumberOfChildren is 0.
843
844 @retval EFI_SUCCESS The device was stopped.
845 @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
846
847 **/
848 EFI_STATUS
849 EFIAPI
850 AtaAtapiPassThruStop (
851 IN EFI_DRIVER_BINDING_PROTOCOL *This,
852 IN EFI_HANDLE Controller,
853 IN UINTN NumberOfChildren,
854 IN EFI_HANDLE *ChildHandleBuffer
855 )
856 {
857 EFI_STATUS Status;
858 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
859 EFI_ATA_PASS_THRU_PROTOCOL *AtaPassThru;
860 EFI_PCI_IO_PROTOCOL *PciIo;
861 EFI_AHCI_REGISTERS *AhciRegisters;
862 UINT64 Supports;
863
864 DEBUG ((EFI_D_INFO, "==AtaAtapiPassThru Stop== Controller = %x\n", Controller));
865
866 Status = gBS->OpenProtocol (
867 Controller,
868 &gEfiAtaPassThruProtocolGuid,
869 (VOID **) &AtaPassThru,
870 This->DriverBindingHandle,
871 Controller,
872 EFI_OPEN_PROTOCOL_GET_PROTOCOL
873 );
874
875 if (EFI_ERROR (Status)) {
876 return EFI_DEVICE_ERROR;
877 }
878
879 Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (AtaPassThru);
880
881 Status = gBS->UninstallMultipleProtocolInterfaces (
882 Controller,
883 &gEfiAtaPassThruProtocolGuid, &(Instance->AtaPassThru),
884 &gEfiExtScsiPassThruProtocolGuid, &(Instance->ExtScsiPassThru),
885 NULL
886 );
887
888 if (EFI_ERROR (Status)) {
889 return EFI_DEVICE_ERROR;
890 }
891
892 //
893 // Close protocols opened by AtaAtapiPassThru controller driver
894 //
895 gBS->CloseProtocol (
896 Controller,
897 &gEfiIdeControllerInitProtocolGuid,
898 This->DriverBindingHandle,
899 Controller
900 );
901
902 //
903 // Close Non-Blocking timer and free Task list.
904 //
905 if (Instance->TimerEvent != NULL) {
906 gBS->CloseEvent (Instance->TimerEvent);
907 Instance->TimerEvent = NULL;
908 }
909 DestroyAsynTaskList (Instance, FALSE);
910 //
911 // Free allocated resource
912 //
913 DestroyDeviceInfoList (Instance);
914
915 //
916 // If the current working mode is AHCI mode, then pre-allocated resource
917 // for AHCI initialization should be released.
918 //
919 PciIo = Instance->PciIo;
920
921 if (Instance->Mode == EfiAtaAhciMode) {
922 AhciRegisters = &Instance->AhciRegisters;
923 PciIo->Unmap (
924 PciIo,
925 AhciRegisters->MapCommandTable
926 );
927 PciIo->FreeBuffer (
928 PciIo,
929 EFI_SIZE_TO_PAGES ((UINTN) AhciRegisters->MaxCommandTableSize),
930 AhciRegisters->AhciCommandTable
931 );
932 PciIo->Unmap (
933 PciIo,
934 AhciRegisters->MapCmdList
935 );
936 PciIo->FreeBuffer (
937 PciIo,
938 EFI_SIZE_TO_PAGES ((UINTN) AhciRegisters->MaxCommandListSize),
939 AhciRegisters->AhciCmdList
940 );
941 PciIo->Unmap (
942 PciIo,
943 AhciRegisters->MapRFis
944 );
945 PciIo->FreeBuffer (
946 PciIo,
947 EFI_SIZE_TO_PAGES ((UINTN) AhciRegisters->MaxReceiveFisSize),
948 AhciRegisters->AhciRFis
949 );
950 }
951
952 //
953 // Disable this ATA host controller.
954 //
955 Status = PciIo->Attributes (
956 PciIo,
957 EfiPciIoAttributeOperationSupported,
958 0,
959 &Supports
960 );
961 if (!EFI_ERROR (Status)) {
962 Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
963 PciIo->Attributes (
964 PciIo,
965 EfiPciIoAttributeOperationDisable,
966 Supports,
967 NULL
968 );
969 }
970
971 //
972 // Restore original PCI attributes
973 //
974 Status = PciIo->Attributes (
975 PciIo,
976 EfiPciIoAttributeOperationSet,
977 Instance->OriginalPciAttributes,
978 NULL
979 );
980 ASSERT_EFI_ERROR (Status);
981
982 FreePool (Instance);
983
984 return Status;
985 }
986
987 /**
988 Traverse the attached ATA devices list to find out the device to access.
989
990 @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
991 @param[in] Port The port number of the ATA device to send the command.
992 @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
993 If there is no port multiplier, then specify 0xFFFF.
994 @param[in] DeviceType The device type of the ATA device.
995
996 @retval The pointer to the data structure of the device info to access.
997
998 **/
999 LIST_ENTRY *
1000 EFIAPI
1001 SearchDeviceInfoList (
1002 IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
1003 IN UINT16 Port,
1004 IN UINT16 PortMultiplier,
1005 IN EFI_ATA_DEVICE_TYPE DeviceType
1006 )
1007 {
1008 EFI_ATA_DEVICE_INFO *DeviceInfo;
1009 LIST_ENTRY *Node;
1010
1011 Node = GetFirstNode (&Instance->DeviceList);
1012 while (!IsNull (&Instance->DeviceList, Node)) {
1013 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
1014
1015 //
1016 // For CD-ROM working in the AHCI mode, only 8 bits are used to record
1017 // the PortMultiplier information. If the CD-ROM is directly attached
1018 // on a SATA port, the PortMultiplier should be translated from 0xFF
1019 // to 0xFFFF according to the UEFI spec.
1020 //
1021 if ((Instance->Mode == EfiAtaAhciMode) &&
1022 (DeviceInfo->Type == EfiIdeCdrom) &&
1023 (PortMultiplier == 0xFF)) {
1024 PortMultiplier = 0xFFFF;
1025 }
1026
1027 if ((DeviceInfo->Type == DeviceType) &&
1028 (Port == DeviceInfo->Port) &&
1029 (PortMultiplier == DeviceInfo->PortMultiplier)) {
1030 return Node;
1031 }
1032
1033 Node = GetNextNode (&Instance->DeviceList, Node);
1034 }
1035
1036 return NULL;
1037 }
1038
1039 /**
1040 Allocate device info data structure to contain device info.
1041 And insert the data structure to the tail of device list for tracing.
1042
1043 @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
1044 @param[in] Port The port number of the ATA device to send the command.
1045 @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
1046 If there is no port multiplier, then specify 0xFFFF.
1047 @param[in] DeviceType The device type of the ATA device.
1048 @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd.
1049
1050 @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list.
1051 @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use.
1052
1053 **/
1054 EFI_STATUS
1055 EFIAPI
1056 CreateNewDeviceInfo (
1057 IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
1058 IN UINT16 Port,
1059 IN UINT16 PortMultiplier,
1060 IN EFI_ATA_DEVICE_TYPE DeviceType,
1061 IN EFI_IDENTIFY_DATA *IdentifyData
1062 )
1063 {
1064 EFI_ATA_DEVICE_INFO *DeviceInfo;
1065
1066 DeviceInfo = AllocateZeroPool (sizeof (EFI_ATA_DEVICE_INFO));
1067
1068 if (DeviceInfo == NULL) {
1069 return EFI_OUT_OF_RESOURCES;
1070 }
1071
1072 DeviceInfo->Signature = ATA_ATAPI_DEVICE_SIGNATURE;
1073 DeviceInfo->Port = Port;
1074 DeviceInfo->PortMultiplier = PortMultiplier;
1075 DeviceInfo->Type = DeviceType;
1076
1077 if (IdentifyData != NULL) {
1078 DeviceInfo->IdentifyData = AllocateCopyPool (sizeof (EFI_IDENTIFY_DATA), IdentifyData);
1079 if (DeviceInfo->IdentifyData == NULL) {
1080 FreePool (DeviceInfo);
1081 return EFI_OUT_OF_RESOURCES;
1082 }
1083 }
1084
1085 InsertTailList (&Instance->DeviceList, &DeviceInfo->Link);
1086
1087 return EFI_SUCCESS;
1088 }
1089
1090 /**
1091 Destroy all attached ATA devices info.
1092
1093 @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
1094
1095 **/
1096 VOID
1097 EFIAPI
1098 DestroyDeviceInfoList (
1099 IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
1100 )
1101 {
1102 EFI_ATA_DEVICE_INFO *DeviceInfo;
1103 LIST_ENTRY *Node;
1104
1105 Node = GetFirstNode (&Instance->DeviceList);
1106 while (!IsNull (&Instance->DeviceList, Node)) {
1107 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
1108
1109 Node = GetNextNode (&Instance->DeviceList, Node);
1110
1111 RemoveEntryList (&DeviceInfo->Link);
1112 if (DeviceInfo->IdentifyData != NULL) {
1113 FreePool (DeviceInfo->IdentifyData);
1114 }
1115 FreePool (DeviceInfo);
1116 }
1117 }
1118
1119 /**
1120 Destroy all pending non blocking tasks.
1121
1122 @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
1123 @param[in] IsSigEvent Indicate whether signal the task event when remove the
1124 task.
1125
1126 **/
1127 VOID
1128 EFIAPI
1129 DestroyAsynTaskList (
1130 IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
1131 IN BOOLEAN IsSigEvent
1132 )
1133 {
1134 LIST_ENTRY *Entry;
1135 LIST_ENTRY *DelEntry;
1136 ATA_NONBLOCK_TASK *Task;
1137 EFI_TPL OldTpl;
1138
1139 OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
1140 if (!IsListEmpty (&Instance->NonBlockingTaskList)) {
1141 //
1142 // Free the Subtask list.
1143 //
1144 for (Entry = (&Instance->NonBlockingTaskList)->ForwardLink;
1145 Entry != (&Instance->NonBlockingTaskList);
1146 ) {
1147 DelEntry = Entry;
1148 Entry = Entry->ForwardLink;
1149 Task = ATA_NON_BLOCK_TASK_FROM_ENTRY (DelEntry);
1150
1151 RemoveEntryList (DelEntry);
1152 if (IsSigEvent) {
1153 Task->Packet->Asb->AtaStatus = 0x01;
1154 gBS->SignalEvent (Task->Event);
1155 }
1156 FreePool (Task);
1157 }
1158 }
1159 gBS->RestoreTPL (OldTpl);
1160 }
1161
1162 /**
1163 Enumerate all attached ATA devices at IDE mode or AHCI mode separately.
1164
1165 The function is designed to enumerate all attached ATA devices.
1166
1167 @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
1168
1169 @retval EFI_SUCCESS Successfully enumerate attached ATA devices.
1170 @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
1171
1172 **/
1173 EFI_STATUS
1174 EFIAPI
1175 EnumerateAttachedDevice (
1176 IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
1177 )
1178 {
1179 EFI_STATUS Status;
1180 PCI_TYPE00 PciData;
1181 UINT8 ClassCode;
1182
1183 Status = EFI_SUCCESS;
1184
1185 Status = Instance->PciIo->Pci.Read (
1186 Instance->PciIo,
1187 EfiPciIoWidthUint8,
1188 PCI_CLASSCODE_OFFSET,
1189 sizeof (PciData.Hdr.ClassCode),
1190 PciData.Hdr.ClassCode
1191 );
1192 ASSERT_EFI_ERROR (Status);
1193
1194 ClassCode = PciData.Hdr.ClassCode[1];
1195
1196 switch (ClassCode) {
1197 case PCI_CLASS_MASS_STORAGE_IDE :
1198 //
1199 // The ATA controller is working at IDE mode
1200 //
1201 Instance->Mode = EfiAtaIdeMode;
1202
1203 Status = IdeModeInitialization (Instance);
1204 if (EFI_ERROR (Status)) {
1205 Status = EFI_DEVICE_ERROR;
1206 goto Done;
1207 }
1208 break;
1209 case PCI_CLASS_MASS_STORAGE_SATADPA :
1210 //
1211 // The ATA controller is working at AHCI mode
1212 //
1213 Instance->Mode = EfiAtaAhciMode;
1214
1215 Status = AhciModeInitialization (Instance);
1216
1217 if (EFI_ERROR (Status)) {
1218 Status = EFI_DEVICE_ERROR;
1219 goto Done;
1220 }
1221
1222 break;
1223 default :
1224 Status = EFI_UNSUPPORTED;
1225 }
1226
1227 Done:
1228 return Status;
1229 }
1230
1231 /**
1232 Sends an ATA command to an ATA device that is attached to the ATA controller. This function
1233 supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
1234 and the non-blocking I/O functionality is optional.
1235
1236 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
1237 @param[in] Port The port number of the ATA device to send the command.
1238 @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
1239 If there is no port multiplier, then specify 0xFFFF.
1240 @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
1241 and PortMultiplierPort.
1242 @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking
1243 I/O is performed. If Event is NULL, then blocking I/O is performed. If
1244 Event is not NULL and non blocking I/O is supported, then non-blocking
1245 I/O is performed, and Event will be signaled when the ATA command completes.
1246
1247 @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands,
1248 InTransferLength bytes were transferred from InDataBuffer. For write and
1249 bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer.
1250 @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred
1251 is returned in InTransferLength. For write and bi-directional commands,
1252 OutTransferLength bytes were transferred by OutDataBuffer.
1253 @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands
1254 already queued. The caller may retry again later.
1255 @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command.
1256 @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA
1257 command was not sent, so no additional status information is available.
1258
1259 **/
1260 EFI_STATUS
1261 EFIAPI
1262 AtaPassThruPassThru (
1263 IN EFI_ATA_PASS_THRU_PROTOCOL *This,
1264 IN UINT16 Port,
1265 IN UINT16 PortMultiplierPort,
1266 IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
1267 IN EFI_EVENT Event OPTIONAL
1268 )
1269 {
1270 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
1271 LIST_ENTRY *Node;
1272 EFI_ATA_DEVICE_INFO *DeviceInfo;
1273 EFI_IDENTIFY_DATA *IdentifyData;
1274 UINT64 Capacity;
1275 UINT32 MaxSectorCount;
1276 ATA_NONBLOCK_TASK *Task;
1277 EFI_TPL OldTpl;
1278 UINT32 BlockSize;
1279
1280 Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
1281
1282 if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->InDataBuffer, This->Mode->IoAlign)) {
1283 return EFI_INVALID_PARAMETER;
1284 }
1285
1286 if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->OutDataBuffer, This->Mode->IoAlign)) {
1287 return EFI_INVALID_PARAMETER;
1288 }
1289
1290 if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->Asb, This->Mode->IoAlign)) {
1291 return EFI_INVALID_PARAMETER;
1292 }
1293
1294 Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
1295
1296 if (Node == NULL) {
1297 Node = SearchDeviceInfoList(Instance, Port, PortMultiplierPort, EfiIdeCdrom);
1298 if (Node == NULL) {
1299 return EFI_INVALID_PARAMETER;
1300 }
1301 }
1302
1303 //
1304 // Check whether this device needs 48-bit addressing (ATAPI-6 ata device).
1305 // Per ATA-6 spec, word83: bit15 is zero and bit14 is one.
1306 // If bit10 is one, it means the ata device support 48-bit addressing.
1307 //
1308 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
1309 IdentifyData = DeviceInfo->IdentifyData;
1310 MaxSectorCount = 0x100;
1311 if ((IdentifyData->AtaData.command_set_supported_83 & (BIT10 | BIT15 | BIT14)) == 0x4400) {
1312 Capacity = *((UINT64 *)IdentifyData->AtaData.maximum_lba_for_48bit_addressing);
1313 if (Capacity > 0xFFFFFFF) {
1314 //
1315 // Capacity exceeds 120GB. 48-bit addressing is really needed
1316 // In this case, the max sector count is 0x10000
1317 //
1318 MaxSectorCount = 0x10000;
1319 }
1320 }
1321
1322 BlockSize = 0x200;
1323 if ((IdentifyData->AtaData.phy_logic_sector_support & (BIT14 | BIT15)) == BIT14) {
1324 //
1325 // Check logical block size
1326 //
1327 if ((IdentifyData->AtaData.phy_logic_sector_support & BIT12) != 0) {
1328 BlockSize = (UINT32) (((IdentifyData->AtaData.logic_sector_size_hi << 16) | IdentifyData->AtaData.logic_sector_size_lo) * sizeof (UINT16));
1329 }
1330 }
1331
1332 //
1333 // convert the transfer length from sector count to byte.
1334 //
1335 if (((Packet->Length & EFI_ATA_PASS_THRU_LENGTH_BYTES) == 0) &&
1336 (Packet->InTransferLength != 0)) {
1337 Packet->InTransferLength = Packet->InTransferLength * BlockSize;
1338 }
1339
1340 //
1341 // convert the transfer length from sector count to byte.
1342 //
1343 if (((Packet->Length & EFI_ATA_PASS_THRU_LENGTH_BYTES) == 0) &&
1344 (Packet->OutTransferLength != 0)) {
1345 Packet->OutTransferLength = Packet->OutTransferLength * BlockSize;
1346 }
1347
1348 //
1349 // If the data buffer described by InDataBuffer/OutDataBuffer and InTransferLength/OutTransferLength
1350 // is too big to be transferred in a single command, then no data is transferred and EFI_BAD_BUFFER_SIZE
1351 // is returned.
1352 //
1353 if (((Packet->InTransferLength != 0) && (Packet->InTransferLength > MaxSectorCount * BlockSize)) ||
1354 ((Packet->OutTransferLength != 0) && (Packet->OutTransferLength > MaxSectorCount * BlockSize))) {
1355 return EFI_BAD_BUFFER_SIZE;
1356 }
1357
1358 //
1359 // For non-blocking mode, queue the Task into the list.
1360 //
1361 if (Event != NULL) {
1362 Task = AllocateZeroPool (sizeof (ATA_NONBLOCK_TASK));
1363 if (Task == NULL) {
1364 return EFI_OUT_OF_RESOURCES;
1365 }
1366
1367 Task->Signature = ATA_NONBLOCKING_TASK_SIGNATURE;
1368 Task->Port = Port;
1369 Task->PortMultiplier = PortMultiplierPort;
1370 Task->Packet = Packet;
1371 Task->Event = Event;
1372 Task->IsStart = FALSE;
1373 Task->RetryTimes = DivU64x32(Packet->Timeout, 1000) + 1;
1374 if (Packet->Timeout == 0) {
1375 Task->InfiniteWait = TRUE;
1376 } else {
1377 Task->InfiniteWait = FALSE;
1378 }
1379
1380 OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
1381 InsertTailList (&Instance->NonBlockingTaskList, &Task->Link);
1382 gBS->RestoreTPL (OldTpl);
1383
1384 return EFI_SUCCESS;
1385 } else {
1386 return AtaPassThruPassThruExecute (
1387 Port,
1388 PortMultiplierPort,
1389 Packet,
1390 Instance,
1391 NULL
1392 );
1393 }
1394 }
1395
1396 /**
1397 Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.
1398 These can either be the list of ports where ATA devices are actually present or the
1399 list of legal port numbers for the ATA controller. Regardless, the caller of this
1400 function must probe the port number returned to see if an ATA device is actually
1401 present at that location on the ATA controller.
1402
1403 The GetNextPort() function retrieves the port number on an ATA controller. If on input
1404 Port is 0xFFFF, then the port number of the first port on the ATA controller is returned
1405 in Port and EFI_SUCCESS is returned.
1406
1407 If Port is a port number that was returned on a previous call to GetNextPort(), then the
1408 port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS
1409 is returned. If Port is not 0xFFFF and Port was not returned on a previous call to
1410 GetNextPort(), then EFI_INVALID_PARAMETER is returned.
1411
1412 If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is
1413 returned.
1414
1415 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
1416 @param[in, out] Port On input, a pointer to the port number on the ATA controller.
1417 On output, a pointer to the next port number on the ATA
1418 controller. An input value of 0xFFFF retrieves the first port
1419 number on the ATA controller.
1420
1421 @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port.
1422 @retval EFI_NOT_FOUND There are no more ports on this ATA controller.
1423 @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call
1424 to GetNextPort().
1425
1426 **/
1427 EFI_STATUS
1428 EFIAPI
1429 AtaPassThruGetNextPort (
1430 IN EFI_ATA_PASS_THRU_PROTOCOL *This,
1431 IN OUT UINT16 *Port
1432 )
1433 {
1434 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
1435 LIST_ENTRY *Node;
1436 EFI_ATA_DEVICE_INFO *DeviceInfo;
1437
1438 Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
1439
1440 if (Port == NULL) {
1441 return EFI_INVALID_PARAMETER;
1442 }
1443
1444 if (*Port == 0xFFFF) {
1445 //
1446 // If the Port is all 0xFF's, start to traverse the device list from the beginning
1447 //
1448 Node = GetFirstNode (&Instance->DeviceList);
1449
1450 while (!IsNull (&Instance->DeviceList, Node)) {
1451 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
1452
1453 if (DeviceInfo->Type == EfiIdeHarddisk) {
1454 *Port = DeviceInfo->Port;
1455 goto Exit;
1456 }
1457
1458 Node = GetNextNode (&Instance->DeviceList, Node);
1459 }
1460
1461 return EFI_NOT_FOUND;
1462 } else if (*Port == Instance->PreviousPort) {
1463 Node = GetFirstNode (&Instance->DeviceList);
1464
1465 while (!IsNull (&Instance->DeviceList, Node)) {
1466 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
1467
1468 if ((DeviceInfo->Type == EfiIdeHarddisk) &&
1469 (DeviceInfo->Port > *Port)){
1470 *Port = DeviceInfo->Port;
1471 goto Exit;
1472 }
1473
1474 Node = GetNextNode (&Instance->DeviceList, Node);
1475 }
1476
1477 return EFI_NOT_FOUND;
1478 } else {
1479 //
1480 // Port is not equal to 0xFFFF and also not equal to previous return value
1481 //
1482 return EFI_INVALID_PARAMETER;
1483 }
1484
1485 Exit:
1486 //
1487 // Update the PreviousPort and PreviousPortMultiplier.
1488 //
1489 Instance->PreviousPort = *Port;
1490
1491 return EFI_SUCCESS;
1492 }
1493
1494 /**
1495 Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA
1496 controller. These can either be the list of port multiplier ports where ATA devices are actually
1497 present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this
1498 function must probe the port number and port multiplier port number returned to see if an ATA
1499 device is actually present.
1500
1501 The GetNextDevice() function retrieves the port multiplier port number of an ATA device
1502 present on a port of an ATA controller.
1503
1504 If PortMultiplierPort points to a port multiplier port number value that was returned on a
1505 previous call to GetNextDevice(), then the port multiplier port number of the next ATA device
1506 on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is
1507 returned.
1508
1509 If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first
1510 ATA device on port of the ATA controller is returned in PortMultiplierPort and
1511 EFI_SUCCESS is returned.
1512
1513 If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort
1514 was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER
1515 is returned.
1516
1517 If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of
1518 the ATA controller, then EFI_NOT_FOUND is returned.
1519
1520 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
1521 @param[in] Port The port number present on the ATA controller.
1522 @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an
1523 ATA device present on the ATA controller.
1524 If on input a PortMultiplierPort of 0xFFFF is specified,
1525 then the port multiplier port number of the first ATA device
1526 is returned. On output, a pointer to the port multiplier port
1527 number of the next ATA device present on an ATA controller.
1528
1529 @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port
1530 of the ATA controller was returned in PortMultiplierPort.
1531 @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller.
1532 @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not
1533 returned on a previous call to GetNextDevice().
1534
1535 **/
1536 EFI_STATUS
1537 EFIAPI
1538 AtaPassThruGetNextDevice (
1539 IN EFI_ATA_PASS_THRU_PROTOCOL *This,
1540 IN UINT16 Port,
1541 IN OUT UINT16 *PortMultiplierPort
1542 )
1543 {
1544 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
1545 LIST_ENTRY *Node;
1546 EFI_ATA_DEVICE_INFO *DeviceInfo;
1547
1548 Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
1549
1550 if (PortMultiplierPort == NULL) {
1551 return EFI_INVALID_PARAMETER;
1552 }
1553
1554 if (Instance->PreviousPortMultiplier == 0xFFFF) {
1555 //
1556 // If a device is directly attached on a port, previous call to this
1557 // function will return the value 0xFFFF for PortMultiplierPort. In
1558 // this case, there should be no more device on the port multiplier.
1559 //
1560 Instance->PreviousPortMultiplier = 0;
1561 return EFI_NOT_FOUND;
1562 }
1563
1564 if (*PortMultiplierPort == Instance->PreviousPortMultiplier) {
1565 Node = GetFirstNode (&Instance->DeviceList);
1566
1567 while (!IsNull (&Instance->DeviceList, Node)) {
1568 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
1569
1570 if ((DeviceInfo->Type == EfiIdeHarddisk) &&
1571 (DeviceInfo->Port == Port) &&
1572 (DeviceInfo->PortMultiplier > *PortMultiplierPort)){
1573 *PortMultiplierPort = DeviceInfo->PortMultiplier;
1574 goto Exit;
1575 }
1576
1577 Node = GetNextNode (&Instance->DeviceList, Node);
1578 }
1579
1580 return EFI_NOT_FOUND;
1581 } else if (*PortMultiplierPort == 0xFFFF) {
1582 //
1583 // If the PortMultiplierPort is all 0xFF's, start to traverse the device list from the beginning
1584 //
1585 Node = GetFirstNode (&Instance->DeviceList);
1586
1587 while (!IsNull (&Instance->DeviceList, Node)) {
1588 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
1589
1590 if ((DeviceInfo->Type == EfiIdeHarddisk) &&
1591 (DeviceInfo->Port == Port)){
1592 *PortMultiplierPort = DeviceInfo->PortMultiplier;
1593 goto Exit;
1594 }
1595
1596 Node = GetNextNode (&Instance->DeviceList, Node);
1597 }
1598
1599 return EFI_NOT_FOUND;
1600 } else {
1601 //
1602 // PortMultiplierPort is not equal to 0xFFFF and also not equal to previous return value
1603 //
1604 return EFI_INVALID_PARAMETER;
1605 }
1606
1607 Exit:
1608 //
1609 // Update the PreviousPort and PreviousPortMultiplier.
1610 //
1611 Instance->PreviousPortMultiplier = *PortMultiplierPort;
1612
1613 return EFI_SUCCESS;
1614 }
1615
1616 /**
1617 Used to allocate and build a device path node for an ATA device on an ATA controller.
1618
1619 The BuildDevicePath() function allocates and builds a single device node for the ATA
1620 device specified by Port and PortMultiplierPort. If the ATA device specified by Port and
1621 PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned.
1622 If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough
1623 resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.
1624
1625 Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
1626 DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort,
1627 and EFI_SUCCESS is returned.
1628
1629 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
1630 @param[in] Port Port specifies the port number of the ATA device for which a
1631 device path node is to be allocated and built.
1632 @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a
1633 device path node is to be allocated and built. If there is no
1634 port multiplier, then specify 0xFFFF.
1635 @param[in, out] DevicePath A pointer to a single device path node that describes the ATA
1636 device specified by Port and PortMultiplierPort. This function
1637 is responsible for allocating the buffer DevicePath with the
1638 boot service AllocatePool(). It is the caller's responsibility
1639 to free DevicePath when the caller is finished with DevicePath.
1640 @retval EFI_SUCCESS The device path node that describes the ATA device specified by
1641 Port and PortMultiplierPort was allocated and returned in DevicePath.
1642 @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not
1643 exist on the ATA controller.
1644 @retval EFI_INVALID_PARAMETER DevicePath is NULL.
1645 @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
1646
1647 **/
1648 EFI_STATUS
1649 EFIAPI
1650 AtaPassThruBuildDevicePath (
1651 IN EFI_ATA_PASS_THRU_PROTOCOL *This,
1652 IN UINT16 Port,
1653 IN UINT16 PortMultiplierPort,
1654 IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
1655 )
1656 {
1657 EFI_DEV_PATH *DevicePathNode;
1658 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
1659 LIST_ENTRY *Node;
1660
1661 Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
1662
1663 //
1664 // Validate parameters passed in.
1665 //
1666 if (DevicePath == NULL) {
1667 return EFI_INVALID_PARAMETER;
1668 }
1669
1670 Node = SearchDeviceInfoList(Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
1671 if (Node == NULL) {
1672 return EFI_NOT_FOUND;
1673 }
1674
1675 if (Instance->Mode == EfiAtaIdeMode) {
1676 DevicePathNode = AllocateCopyPool (sizeof (ATAPI_DEVICE_PATH), &mAtapiDevicePathTemplate);
1677 if (DevicePathNode == NULL) {
1678 return EFI_OUT_OF_RESOURCES;
1679 }
1680 DevicePathNode->Atapi.PrimarySecondary = (UINT8) Port;
1681 DevicePathNode->Atapi.SlaveMaster = (UINT8) PortMultiplierPort;
1682 DevicePathNode->Atapi.Lun = 0;
1683 } else {
1684 DevicePathNode = AllocateCopyPool (sizeof (SATA_DEVICE_PATH), &mSataDevicePathTemplate);
1685 if (DevicePathNode == NULL) {
1686 return EFI_OUT_OF_RESOURCES;
1687 }
1688
1689 DevicePathNode->Sata.HBAPortNumber = Port;
1690 DevicePathNode->Sata.PortMultiplierPortNumber = PortMultiplierPort;
1691 DevicePathNode->Sata.Lun = 0;
1692 }
1693
1694 *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) DevicePathNode;
1695
1696 return EFI_SUCCESS;
1697 }
1698
1699 /**
1700 Used to translate a device path node to a port number and port multiplier port number.
1701
1702 The GetDevice() function determines the port and port multiplier port number associated with
1703 the ATA device described by DevicePath. If DevicePath is a device path node type that the
1704 ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents
1705 DevicePath into a port number and port multiplier port number.
1706
1707 If this translation is successful, then that port number and port multiplier port number are returned
1708 in Port and PortMultiplierPort, and EFI_SUCCESS is returned.
1709
1710 If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned.
1711
1712 If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then
1713 EFI_UNSUPPORTED is returned.
1714
1715 If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not
1716 a valid translation from DevicePath to a port number and port multiplier port number, then
1717 EFI_NOT_FOUND is returned.
1718
1719 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
1720 @param[in] DevicePath A pointer to the device path node that describes an ATA device on the
1721 ATA controller.
1722 @param[out] Port On return, points to the port number of an ATA device on the ATA controller.
1723 @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device
1724 on the ATA controller.
1725
1726 @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier
1727 port number, and they were returned in Port and PortMultiplierPort.
1728 @retval EFI_INVALID_PARAMETER DevicePath is NULL.
1729 @retval EFI_INVALID_PARAMETER Port is NULL.
1730 @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL.
1731 @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath.
1732 @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier
1733 port number does not exist.
1734 **/
1735 EFI_STATUS
1736 EFIAPI
1737 AtaPassThruGetDevice (
1738 IN EFI_ATA_PASS_THRU_PROTOCOL *This,
1739 IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
1740 OUT UINT16 *Port,
1741 OUT UINT16 *PortMultiplierPort
1742 )
1743 {
1744 EFI_DEV_PATH *DevicePathNode;
1745 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
1746 LIST_ENTRY *Node;
1747
1748 Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
1749
1750 //
1751 // Validate parameters passed in.
1752 //
1753 if (DevicePath == NULL || Port == NULL || PortMultiplierPort == NULL) {
1754 return EFI_INVALID_PARAMETER;
1755 }
1756
1757 //
1758 // Check whether the DevicePath belongs to SCSI_DEVICE_PATH or ATAPI_DEVICE_PATH
1759 //
1760 if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
1761 ((DevicePath->SubType != MSG_SATA_DP) &&
1762 (DevicePath->SubType != MSG_ATAPI_DP)) ||
1763 ((DevicePathNodeLength(DevicePath) != sizeof(ATAPI_DEVICE_PATH)) &&
1764 (DevicePathNodeLength(DevicePath) != sizeof(SATA_DEVICE_PATH)))) {
1765 return EFI_UNSUPPORTED;
1766 }
1767
1768 DevicePathNode = (EFI_DEV_PATH *) DevicePath;
1769
1770 if (Instance->Mode == EfiAtaIdeMode) {
1771 *Port = DevicePathNode->Atapi.PrimarySecondary;
1772 *PortMultiplierPort = DevicePathNode->Atapi.SlaveMaster;
1773 } else {
1774 *Port = DevicePathNode->Sata.HBAPortNumber;
1775 *PortMultiplierPort = DevicePathNode->Sata.PortMultiplierPortNumber;
1776 }
1777
1778 Node = SearchDeviceInfoList(Instance, *Port, *PortMultiplierPort, EfiIdeHarddisk);
1779
1780 if (Node == NULL) {
1781 return EFI_NOT_FOUND;
1782 }
1783
1784 return EFI_SUCCESS;
1785 }
1786
1787 /**
1788 Resets a specific port on the ATA controller. This operation also resets all the ATA devices
1789 connected to the port.
1790
1791 The ResetChannel() function resets an a specific port on an ATA controller. This operation
1792 resets all the ATA devices connected to that port. If this ATA controller does not support
1793 a reset port operation, then EFI_UNSUPPORTED is returned.
1794
1795 If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is
1796 returned.
1797
1798 If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned.
1799
1800 If the port reset operation is completed, then EFI_SUCCESS is returned.
1801
1802 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
1803 @param[in] Port The port number on the ATA controller.
1804
1805 @retval EFI_SUCCESS The ATA controller port was reset.
1806 @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation.
1807 @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port.
1808 @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port.
1809
1810 **/
1811 EFI_STATUS
1812 EFIAPI
1813 AtaPassThruResetPort (
1814 IN EFI_ATA_PASS_THRU_PROTOCOL *This,
1815 IN UINT16 Port
1816 )
1817 {
1818 //
1819 // Return success directly then upper layer driver could think reset port operation is done.
1820 //
1821 return EFI_SUCCESS;
1822 }
1823
1824 /**
1825 Resets an ATA device that is connected to an ATA controller.
1826
1827 The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort.
1828 If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is
1829 returned.
1830
1831 If Port or PortMultiplierPort are not in a valid range for this ATA controller, then
1832 EFI_INVALID_PARAMETER is returned.
1833
1834 If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR
1835 is returned.
1836
1837 If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is
1838 returned.
1839
1840 If the device reset operation is completed, then EFI_SUCCESS is returned.
1841
1842 @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
1843 @param[in] Port Port represents the port number of the ATA device to be reset.
1844 @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset.
1845 If there is no port multiplier, then specify 0xFFFF.
1846 @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset.
1847 @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation.
1848 @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid.
1849 @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device
1850 specified by Port and PortMultiplierPort.
1851 @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device
1852 specified by Port and PortMultiplierPort.
1853
1854 **/
1855 EFI_STATUS
1856 EFIAPI
1857 AtaPassThruResetDevice (
1858 IN EFI_ATA_PASS_THRU_PROTOCOL *This,
1859 IN UINT16 Port,
1860 IN UINT16 PortMultiplierPort
1861 )
1862 {
1863 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
1864 LIST_ENTRY *Node;
1865
1866 Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
1867
1868 Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
1869
1870 if (Node == NULL) {
1871 return EFI_INVALID_PARAMETER;
1872 }
1873
1874 //
1875 // Return success directly then upper layer driver could think reset device operation is done.
1876 //
1877 return EFI_SUCCESS;
1878 }
1879
1880 /**
1881 Submit ATAPI request sense command.
1882
1883 @param[in] This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
1884 @param[in] Target The Target is an array of size TARGET_MAX_BYTES and it represents
1885 the id of the SCSI device to send the SCSI Request Packet. Each
1886 transport driver may choose to utilize a subset of this size to suit the needs
1887 of transport target representation. For example, a Fibre Channel driver
1888 may use only 8 bytes (WWN) to represent an FC target.
1889 @param[in] Lun The LUN of the SCSI device to send the SCSI Request Packet.
1890 @param[in] SenseData A pointer to store sense data.
1891 @param[in] SenseDataLength The sense data length.
1892 @param[in] Timeout The timeout value to execute this cmd, uses 100ns as a unit.
1893
1894 @retval EFI_SUCCESS Send out the ATAPI packet command successfully.
1895 @retval EFI_DEVICE_ERROR The device failed to send data.
1896
1897 **/
1898 EFI_STATUS
1899 EFIAPI
1900 AtaPacketRequestSense (
1901 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
1902 IN UINT8 *Target,
1903 IN UINT64 Lun,
1904 IN VOID *SenseData,
1905 IN UINT8 SenseDataLength,
1906 IN UINT64 Timeout
1907 )
1908 {
1909 EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET Packet;
1910 UINT8 Cdb[12];
1911 EFI_STATUS Status;
1912
1913 ZeroMem (&Packet, sizeof (EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET));
1914 ZeroMem (Cdb, 12);
1915
1916 Cdb[0] = ATA_CMD_REQUEST_SENSE;
1917 Cdb[4] = SenseDataLength;
1918
1919 Packet.Timeout = Timeout;
1920 Packet.Cdb = Cdb;
1921 Packet.CdbLength = 12;
1922 Packet.DataDirection = EFI_EXT_SCSI_DATA_DIRECTION_READ;
1923 Packet.InDataBuffer = SenseData;
1924 Packet.InTransferLength = SenseDataLength;
1925
1926 Status = ExtScsiPassThruPassThru (This, Target, Lun, &Packet, NULL);
1927
1928 return Status;
1929 }
1930
1931 /**
1932 Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
1933 supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
1934 nonblocking I/O functionality is optional.
1935
1936 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
1937 @param Target The Target is an array of size TARGET_MAX_BYTES and it represents
1938 the id of the SCSI device to send the SCSI Request Packet. Each
1939 transport driver may choose to utilize a subset of this size to suit the needs
1940 of transport target representation. For example, a Fibre Channel driver
1941 may use only 8 bytes (WWN) to represent an FC target.
1942 @param Lun The LUN of the SCSI device to send the SCSI Request Packet.
1943 @param Packet A pointer to the SCSI Request Packet to send to the SCSI device
1944 specified by Target and Lun.
1945 @param Event If nonblocking I/O is not supported then Event is ignored, and blocking
1946 I/O is performed. If Event is NULL, then blocking I/O is performed. If
1947 Event is not NULL and non blocking I/O is supported, then
1948 nonblocking I/O is performed, and Event will be signaled when the
1949 SCSI Request Packet completes.
1950
1951 @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
1952 commands, InTransferLength bytes were transferred from
1953 InDataBuffer. For write and bi-directional commands,
1954 OutTransferLength bytes were transferred by
1955 OutDataBuffer.
1956 @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that
1957 could be transferred is returned in InTransferLength. For write
1958 and bi-directional commands, OutTransferLength bytes were
1959 transferred by OutDataBuffer.
1960 @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
1961 SCSI Request Packets already queued. The caller may retry again later.
1962 @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
1963 Packet.
1964 @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
1965 @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported
1966 by the host adapter. This includes the case of Bi-directional SCSI
1967 commands not supported by the implementation. The SCSI Request
1968 Packet was not sent, so no additional status information is available.
1969 @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
1970
1971 **/
1972 EFI_STATUS
1973 EFIAPI
1974 ExtScsiPassThruPassThru (
1975 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
1976 IN UINT8 *Target,
1977 IN UINT64 Lun,
1978 IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
1979 IN EFI_EVENT Event OPTIONAL
1980 )
1981 {
1982 EFI_STATUS Status;
1983 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
1984 UINT8 Port;
1985 UINT8 PortMultiplier;
1986 EFI_ATA_HC_WORK_MODE Mode;
1987 LIST_ENTRY *Node;
1988 EFI_ATA_DEVICE_INFO *DeviceInfo;
1989 BOOLEAN SenseReq;
1990 EFI_SCSI_SENSE_DATA *PtrSenseData;
1991 UINTN SenseDataLen;
1992 EFI_STATUS SenseStatus;
1993
1994 SenseDataLen = 0;
1995 Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
1996
1997 if ((Packet == NULL) || (Packet->Cdb == NULL)) {
1998 return EFI_INVALID_PARAMETER;
1999 }
2000
2001 //
2002 // Don't support variable length CDB
2003 //
2004 if ((Packet->CdbLength != 6) && (Packet->CdbLength != 10) &&
2005 (Packet->CdbLength != 12) && (Packet->CdbLength != 16)) {
2006 return EFI_INVALID_PARAMETER;
2007 }
2008
2009 if ((Packet->SenseDataLength != 0) && (Packet->SenseData == NULL)) {
2010 return EFI_INVALID_PARAMETER;
2011 }
2012
2013 if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->InDataBuffer, This->Mode->IoAlign)) {
2014 return EFI_INVALID_PARAMETER;
2015 }
2016
2017 if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->OutDataBuffer, This->Mode->IoAlign)) {
2018 return EFI_INVALID_PARAMETER;
2019 }
2020
2021 if ((This->Mode->IoAlign > 1) && !IS_ALIGNED(Packet->SenseData, This->Mode->IoAlign)) {
2022 return EFI_INVALID_PARAMETER;
2023 }
2024
2025 //
2026 // For ATAPI device, doesn't support multiple LUN device.
2027 //
2028 if (Lun != 0) {
2029 return EFI_INVALID_PARAMETER;
2030 }
2031
2032 //
2033 // The layout of Target array:
2034 // ________________________________________________________________________
2035 // | Byte 0 | Byte 1 | ... | TARGET_MAX_BYTES - 1 |
2036 // |_____________________|_____________________|_____|______________________|
2037 // | | The port multiplier | | |
2038 // | The port number | port number | N/A | N/A |
2039 // |_____________________|_____________________|_____|______________________|
2040 //
2041 // For ATAPI device, 2 bytes is enough to represent the location of SCSI device.
2042 //
2043 Port = Target[0];
2044 PortMultiplier = Target[1];
2045
2046 Node = SearchDeviceInfoList(Instance, Port, PortMultiplier, EfiIdeCdrom);
2047 if (Node == NULL) {
2048 return EFI_INVALID_PARAMETER;
2049 }
2050
2051 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
2052
2053 //
2054 // ATA_CMD_IDENTIFY_DEVICE cmd is a ATA cmd but not a SCSI cmd.
2055 // Normally it should NOT be passed down through ExtScsiPassThru protocol interface.
2056 // But to response EFI_DISK_INFO.Identify() request from ScsiDisk, we should handle this command.
2057 //
2058 if (*((UINT8*)Packet->Cdb) == ATA_CMD_IDENTIFY_DEVICE) {
2059 CopyMem (Packet->InDataBuffer, DeviceInfo->IdentifyData, sizeof (EFI_IDENTIFY_DATA));
2060 //
2061 // For IDENTIFY DEVICE cmd, we don't need to get sense data.
2062 //
2063 Packet->SenseDataLength = 0;
2064 return EFI_SUCCESS;
2065 }
2066
2067 Mode = Instance->Mode;
2068 switch (Mode) {
2069 case EfiAtaIdeMode:
2070 //
2071 // Reassign IDE mode io port registers' base addresses
2072 //
2073 Status = GetIdeRegisterIoAddr (Instance->PciIo, Instance->IdeRegisters);
2074
2075 if (EFI_ERROR (Status)) {
2076 return Status;
2077 }
2078
2079 Status = AtaPacketCommandExecute (Instance->PciIo, &Instance->IdeRegisters[Port], Port, PortMultiplier, Packet);
2080 break;
2081 case EfiAtaAhciMode:
2082 if (PortMultiplier == 0xFF) {
2083 //
2084 // If there is no port multiplier, the PortMultiplier will be 0xFF
2085 // Here, we convert its value to 0 to follow the AHCI spec.
2086 //
2087 PortMultiplier = 0;
2088 }
2089 Status = AhciPacketCommandExecute (Instance->PciIo, &Instance->AhciRegisters, Port, PortMultiplier, Packet);
2090 break;
2091 default :
2092 Status = EFI_DEVICE_ERROR;
2093 break;
2094 }
2095
2096 //
2097 // If the cmd doesn't get executed correctly, then check sense data.
2098 //
2099 if (EFI_ERROR (Status) && (Packet->SenseDataLength != 0) && (*((UINT8*)Packet->Cdb) != ATA_CMD_REQUEST_SENSE)) {
2100 PtrSenseData = AllocateAlignedPages (EFI_SIZE_TO_PAGES (sizeof (EFI_SCSI_SENSE_DATA)), This->Mode->IoAlign);
2101 if (PtrSenseData == NULL) {
2102 return EFI_DEVICE_ERROR;
2103 }
2104
2105 for (SenseReq = TRUE; SenseReq;) {
2106 SenseStatus = AtaPacketRequestSense (
2107 This,
2108 Target,
2109 Lun,
2110 PtrSenseData,
2111 sizeof (EFI_SCSI_SENSE_DATA),
2112 Packet->Timeout
2113 );
2114 if (EFI_ERROR (SenseStatus)) {
2115 break;
2116 }
2117
2118 CopyMem ((UINT8*)Packet->SenseData + SenseDataLen, PtrSenseData, sizeof (EFI_SCSI_SENSE_DATA));
2119 SenseDataLen += sizeof (EFI_SCSI_SENSE_DATA);
2120
2121 //
2122 // no more sense key or number of sense keys exceeds predefined,
2123 // skip the loop.
2124 //
2125 if ((PtrSenseData->Sense_Key == EFI_SCSI_SK_NO_SENSE) ||
2126 (SenseDataLen + sizeof (EFI_SCSI_SENSE_DATA) > Packet->SenseDataLength)) {
2127 SenseReq = FALSE;
2128 }
2129 }
2130 FreeAlignedPages (PtrSenseData, EFI_SIZE_TO_PAGES (sizeof (EFI_SCSI_SENSE_DATA)));
2131 }
2132 //
2133 // Update the SenseDataLength field to the data length received.
2134 //
2135 Packet->SenseDataLength = (UINT8)SenseDataLen;
2136 return Status;
2137 }
2138
2139 /**
2140 Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
2141 can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
2142 Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
2143 Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
2144 channel.
2145
2146 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
2147 @param Target On input, a pointer to the Target ID (an array of size
2148 TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
2149 On output, a pointer to the Target ID (an array of
2150 TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
2151 channel. An input value of 0xF(all bytes in the array are 0xF) in the
2152 Target array retrieves the Target ID of the first SCSI device present on a
2153 SCSI channel.
2154 @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI
2155 channel. On output, a pointer to the LUN of the next SCSI device present
2156 on a SCSI channel.
2157
2158 @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI
2159 channel was returned in Target and Lun.
2160 @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
2161 not returned on a previous call to GetNextTargetLun().
2162 @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
2163
2164 **/
2165 EFI_STATUS
2166 EFIAPI
2167 ExtScsiPassThruGetNextTargetLun (
2168 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
2169 IN OUT UINT8 **Target,
2170 IN OUT UINT64 *Lun
2171 )
2172 {
2173 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
2174 LIST_ENTRY *Node;
2175 EFI_ATA_DEVICE_INFO *DeviceInfo;
2176 UINT8 *Target8;
2177 UINT16 *Target16;
2178
2179 Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
2180
2181 if (Target == NULL || Lun == NULL) {
2182 return EFI_INVALID_PARAMETER;
2183 }
2184
2185 if (*Target == NULL) {
2186 return EFI_INVALID_PARAMETER;
2187 }
2188
2189 Target8 = *Target;
2190 Target16 = (UINT16 *)*Target;
2191
2192 if (CompareMem(Target8, mScsiId, TARGET_MAX_BYTES) != 0) {
2193 //
2194 // For ATAPI device, we use 2 least significant bytes to represent the location of SCSI device.
2195 // So the higher bytes in Target array should be 0xFF.
2196 //
2197 if (CompareMem (&Target8[2], &mScsiId[2], TARGET_MAX_BYTES - 2) != 0) {
2198 return EFI_INVALID_PARAMETER;
2199 }
2200
2201 //
2202 // When Target is not all 0xFF's, compare 2 least significant bytes with
2203 // previous target id to see if it is returned by previous call.
2204 //
2205 if ((*Target16 != Instance->PreviousTargetId) ||
2206 (*Lun != Instance->PreviousLun)) {
2207 return EFI_INVALID_PARAMETER;
2208 }
2209
2210 //
2211 // Traverse the whole device list to find the next cdrom closed to
2212 // the device signified by Target[0] and Target[1].
2213 //
2214 // Note that we here use a tricky way to find the next cdrom :
2215 // All ata devices are detected and inserted into the device list
2216 // sequentially.
2217 //
2218 Node = GetFirstNode (&Instance->DeviceList);
2219
2220 while (!IsNull (&Instance->DeviceList, Node)) {
2221 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
2222
2223 if ((DeviceInfo->Type == EfiIdeCdrom) &&
2224 ((Target8[0] < DeviceInfo->Port) ||
2225 ((Target8[0] == DeviceInfo->Port) &&
2226 (Target8[1] < (UINT8)DeviceInfo->PortMultiplier)))) {
2227 Target8[0] = (UINT8)DeviceInfo->Port;
2228 Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
2229 goto Exit;
2230 }
2231
2232 Node = GetNextNode (&Instance->DeviceList, Node);
2233 }
2234
2235 return EFI_NOT_FOUND;
2236 } else {
2237 //
2238 // If the array is all 0xFF's, start to traverse the device list from the beginning
2239 //
2240 Node = GetFirstNode (&Instance->DeviceList);
2241 while (!IsNull (&Instance->DeviceList, Node)) {
2242 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
2243
2244 if (DeviceInfo->Type == EfiIdeCdrom) {
2245 Target8[0] = (UINT8)DeviceInfo->Port;
2246 Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
2247 goto Exit;
2248 }
2249
2250 Node = GetNextNode (&Instance->DeviceList, Node);
2251 }
2252
2253 return EFI_NOT_FOUND;
2254 }
2255
2256 Exit:
2257 *Lun = 0;
2258
2259 //
2260 // Update the PreviousTargetId.
2261 //
2262 Instance->PreviousTargetId = *Target16;
2263 Instance->PreviousLun = *Lun;
2264
2265 return EFI_SUCCESS;
2266 }
2267
2268 /**
2269 Used to allocate and build a device path node for a SCSI device on a SCSI channel.
2270
2271 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
2272 @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the
2273 Target ID of the SCSI device for which a device path node is to be
2274 allocated and built. Transport drivers may chose to utilize a subset of
2275 this size to suit the representation of targets. For example, a Fibre
2276 Channel driver may use only 8 bytes (WWN) in the array to represent a
2277 FC target.
2278 @param Lun The LUN of the SCSI device for which a device path node is to be
2279 allocated and built.
2280 @param DevicePath A pointer to a single device path node that describes the SCSI device
2281 specified by Target and Lun. This function is responsible for
2282 allocating the buffer DevicePath with the boot service
2283 AllocatePool(). It is the caller's responsibility to free
2284 DevicePath when the caller is finished with DevicePath.
2285
2286 @retval EFI_SUCCESS The device path node that describes the SCSI device specified by
2287 Target and Lun was allocated and returned in
2288 DevicePath.
2289 @retval EFI_INVALID_PARAMETER DevicePath is NULL.
2290 @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist
2291 on the SCSI channel.
2292 @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
2293
2294 **/
2295 EFI_STATUS
2296 EFIAPI
2297 ExtScsiPassThruBuildDevicePath (
2298 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
2299 IN UINT8 *Target,
2300 IN UINT64 Lun,
2301 IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
2302 )
2303 {
2304 EFI_DEV_PATH *DevicePathNode;
2305 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
2306 UINT8 Port;
2307 UINT8 PortMultiplier;
2308
2309 Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
2310
2311 Port = Target[0];
2312 PortMultiplier = Target[1];
2313
2314 //
2315 // Validate parameters passed in.
2316 //
2317 if (DevicePath == NULL) {
2318 return EFI_INVALID_PARAMETER;
2319 }
2320
2321 //
2322 // can not build device path for the SCSI Host Controller.
2323 //
2324 if (Lun != 0) {
2325 return EFI_NOT_FOUND;
2326 }
2327
2328 if (SearchDeviceInfoList(Instance, Port, PortMultiplier, EfiIdeCdrom) == NULL) {
2329 return EFI_NOT_FOUND;
2330 }
2331
2332 if (Instance->Mode == EfiAtaIdeMode) {
2333 DevicePathNode = AllocateCopyPool (sizeof (ATAPI_DEVICE_PATH), &mAtapiDevicePathTemplate);
2334 if (DevicePathNode == NULL) {
2335 return EFI_OUT_OF_RESOURCES;
2336 }
2337
2338 DevicePathNode->Atapi.PrimarySecondary = Port;
2339 DevicePathNode->Atapi.SlaveMaster = PortMultiplier;
2340 DevicePathNode->Atapi.Lun = (UINT16) Lun;
2341 } else {
2342 DevicePathNode = AllocateCopyPool (sizeof (SATA_DEVICE_PATH), &mSataDevicePathTemplate);
2343 if (DevicePathNode == NULL) {
2344 return EFI_OUT_OF_RESOURCES;
2345 }
2346
2347 DevicePathNode->Sata.HBAPortNumber = Port;
2348 //
2349 // For CD-ROM working in the AHCI mode, only 8 bits are used to record
2350 // the PortMultiplier information. If the CD-ROM is directly attached
2351 // on a SATA port, the PortMultiplier should be translated from 0xFF
2352 // to 0xFFFF according to the UEFI spec.
2353 //
2354 DevicePathNode->Sata.PortMultiplierPortNumber = PortMultiplier == 0xFF ? 0xFFFF : PortMultiplier;
2355 DevicePathNode->Sata.Lun = (UINT16) Lun;
2356 }
2357
2358 *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) DevicePathNode;
2359
2360 return EFI_SUCCESS;
2361 }
2362
2363 /**
2364 Used to translate a device path node to a Target ID and LUN.
2365
2366 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
2367 @param DevicePath A pointer to a single device path node that describes the SCSI device
2368 on the SCSI channel.
2369 @param Target A pointer to the Target Array which represents the ID of a SCSI device
2370 on the SCSI channel.
2371 @param Lun A pointer to the LUN of a SCSI device on the SCSI channel.
2372
2373 @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and
2374 LUN, and they were returned in Target and Lun.
2375 @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
2376 @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN
2377 does not exist.
2378 @retval EFI_UNSUPPORTED This driver does not support the device path node type in
2379 DevicePath.
2380
2381 **/
2382 EFI_STATUS
2383 EFIAPI
2384 ExtScsiPassThruGetTargetLun (
2385 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
2386 IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
2387 OUT UINT8 **Target,
2388 OUT UINT64 *Lun
2389 )
2390 {
2391 EFI_DEV_PATH *DevicePathNode;
2392 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
2393 LIST_ENTRY *Node;
2394
2395 Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
2396
2397 //
2398 // Validate parameters passed in.
2399 //
2400 if (DevicePath == NULL || Target == NULL || Lun == NULL) {
2401 return EFI_INVALID_PARAMETER;
2402 }
2403
2404 if (*Target == NULL) {
2405 return EFI_INVALID_PARAMETER;
2406 }
2407 //
2408 // Check whether the DevicePath belongs to SCSI_DEVICE_PATH
2409 //
2410 if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
2411 ((DevicePath->SubType != MSG_ATAPI_DP) &&
2412 (DevicePath->SubType != MSG_SATA_DP)) ||
2413 ((DevicePathNodeLength(DevicePath) != sizeof(ATAPI_DEVICE_PATH)) &&
2414 (DevicePathNodeLength(DevicePath) != sizeof(SATA_DEVICE_PATH)))) {
2415 return EFI_UNSUPPORTED;
2416 }
2417
2418 SetMem (*Target, TARGET_MAX_BYTES, 0xFF);
2419
2420 DevicePathNode = (EFI_DEV_PATH *) DevicePath;
2421
2422 if (Instance->Mode == EfiAtaIdeMode) {
2423 (*Target)[0] = (UINT8) DevicePathNode->Atapi.PrimarySecondary;
2424 (*Target)[1] = (UINT8) DevicePathNode->Atapi.SlaveMaster;
2425 *Lun = (UINT8) DevicePathNode->Atapi.Lun;
2426 } else {
2427 (*Target)[0] = (UINT8) DevicePathNode->Sata.HBAPortNumber;
2428 (*Target)[1] = (UINT8) DevicePathNode->Sata.PortMultiplierPortNumber;
2429 *Lun = (UINT8) DevicePathNode->Sata.Lun;
2430 }
2431
2432 Node = SearchDeviceInfoList(Instance, (*Target)[0], (*Target)[1], EfiIdeCdrom);
2433
2434 if (Node == NULL) {
2435 return EFI_NOT_FOUND;
2436 }
2437
2438 if (*Lun != 0) {
2439 return EFI_NOT_FOUND;
2440 }
2441
2442 return EFI_SUCCESS;
2443 }
2444
2445 /**
2446 Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
2447
2448 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
2449
2450 @retval EFI_SUCCESS The SCSI channel was reset.
2451 @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
2452 @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel.
2453 @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation.
2454
2455 **/
2456 EFI_STATUS
2457 EFIAPI
2458 ExtScsiPassThruResetChannel (
2459 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
2460 )
2461 {
2462 //
2463 // Return success directly then upper layer driver could think reset channel operation is done.
2464 //
2465 return EFI_SUCCESS;
2466 }
2467
2468 /**
2469 Resets a SCSI logical unit that is connected to a SCSI channel.
2470
2471 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
2472 @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the
2473 target port ID of the SCSI device containing the SCSI logical unit to
2474 reset. Transport drivers may chose to utilize a subset of this array to suit
2475 the representation of their targets.
2476 @param Lun The LUN of the SCSI device to reset.
2477
2478 @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset.
2479 @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
2480 @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device
2481 specified by Target and Lun.
2482 @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation.
2483 @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device
2484 specified by Target and Lun.
2485
2486 **/
2487 EFI_STATUS
2488 EFIAPI
2489 ExtScsiPassThruResetTargetLun (
2490 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
2491 IN UINT8 *Target,
2492 IN UINT64 Lun
2493 )
2494 {
2495 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
2496 LIST_ENTRY *Node;
2497 UINT8 Port;
2498 UINT8 PortMultiplier;
2499
2500 Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
2501 //
2502 // For ATAPI device, doesn't support multiple LUN device.
2503 //
2504 if (Lun != 0) {
2505 return EFI_INVALID_PARAMETER;
2506 }
2507 //
2508 // The layout of Target array:
2509 // ________________________________________________________________________
2510 // | Byte 0 | Byte 1 | ... | TARGET_MAX_BYTES - 1 |
2511 // |_____________________|_____________________|_____|______________________|
2512 // | | The port multiplier | | |
2513 // | The port number | port number | N/A | N/A |
2514 // |_____________________|_____________________|_____|______________________|
2515 //
2516 // For ATAPI device, 2 bytes is enough to represent the location of SCSI device.
2517 //
2518 Port = Target[0];
2519 PortMultiplier = Target[1];
2520
2521 Node = SearchDeviceInfoList(Instance, Port, PortMultiplier, EfiIdeCdrom);
2522 if (Node == NULL) {
2523 return EFI_INVALID_PARAMETER;
2524 }
2525
2526 //
2527 // Return success directly then upper layer driver could think reset target LUN operation is done.
2528 //
2529 return EFI_SUCCESS;
2530 }
2531
2532 /**
2533 Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
2534 be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
2535 for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
2536 see if a SCSI device is actually present at that location on the SCSI channel.
2537
2538 @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
2539 @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
2540 On output, a pointer to the Target ID (an array of
2541 TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
2542 channel. An input value of 0xF(all bytes in the array are 0xF) in the
2543 Target array retrieves the Target ID of the first SCSI device present on a
2544 SCSI channel.
2545
2546 @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
2547 channel was returned in Target.
2548 @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
2549 @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
2550 returned on a previous call to GetNextTarget().
2551 @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
2552
2553 **/
2554 EFI_STATUS
2555 EFIAPI
2556 ExtScsiPassThruGetNextTarget (
2557 IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
2558 IN OUT UINT8 **Target
2559 )
2560 {
2561 ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
2562 LIST_ENTRY *Node;
2563 EFI_ATA_DEVICE_INFO *DeviceInfo;
2564 UINT8 *Target8;
2565 UINT16 *Target16;
2566
2567 Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
2568
2569 if (Target == NULL || *Target == NULL) {
2570 return EFI_INVALID_PARAMETER;
2571 }
2572
2573 Target8 = *Target;
2574 Target16 = (UINT16 *)*Target;
2575
2576 if (CompareMem(Target8, mScsiId, TARGET_MAX_BYTES) != 0) {
2577 //
2578 // For ATAPI device, we use 2 least significant bytes to represent the location of SCSI device.
2579 // So the higher bytes in Target array should be 0xFF.
2580 //
2581 if (CompareMem (&Target8[2], &mScsiId[2], TARGET_MAX_BYTES - 2) != 0) {
2582 return EFI_INVALID_PARAMETER;
2583 }
2584
2585 //
2586 // When Target is not all 0xFF's, compare 2 least significant bytes with
2587 // previous target id to see if it is returned by previous call.
2588 //
2589 if (*Target16 != Instance->PreviousTargetId) {
2590 return EFI_INVALID_PARAMETER;
2591 }
2592
2593 //
2594 // Traverse the whole device list to find the next cdrom closed to
2595 // the device signified by Target[0] and Target[1].
2596 //
2597 // Note that we here use a tricky way to find the next cdrom :
2598 // All ata devices are detected and inserted into the device list
2599 // sequentially.
2600 //
2601 Node = GetFirstNode (&Instance->DeviceList);
2602 while (!IsNull (&Instance->DeviceList, Node)) {
2603 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
2604
2605 if ((DeviceInfo->Type == EfiIdeCdrom) &&
2606 ((Target8[0] < DeviceInfo->Port) ||
2607 ((Target8[0] == DeviceInfo->Port) &&
2608 (Target8[1] < (UINT8)DeviceInfo->PortMultiplier)))) {
2609 Target8[0] = (UINT8)DeviceInfo->Port;
2610 Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
2611 goto Exit;
2612 }
2613
2614 Node = GetNextNode (&Instance->DeviceList, Node);
2615 }
2616
2617 return EFI_NOT_FOUND;
2618 } else {
2619 //
2620 // If the array is all 0xFF's, start to traverse the device list from the beginning
2621 //
2622 Node = GetFirstNode (&Instance->DeviceList);
2623
2624 while (!IsNull (&Instance->DeviceList, Node)) {
2625 DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
2626
2627 if (DeviceInfo->Type == EfiIdeCdrom) {
2628 Target8[0] = (UINT8)DeviceInfo->Port;
2629 Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
2630 goto Exit;
2631 }
2632
2633 Node = GetNextNode (&Instance->DeviceList, Node);
2634 }
2635
2636 return EFI_NOT_FOUND;
2637 }
2638
2639 Exit:
2640 //
2641 // Update the PreviousTargetId.
2642 //
2643 Instance->PreviousTargetId = *Target16;
2644
2645 return EFI_SUCCESS;
2646 }
2647
EFI Development Kit II mirror for PVE