MdeModulePkg DxeCore/PiSmmCore: Add UEFI memory and SMRAM profile support.
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
1 ## @file MdeModulePkg.dec
2 # This package provides the modules that conform to UEFI/PI Industry standards.
3 # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
4 # and libraries instances, which are used for those modules.
5 #
6 # Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
7 # This program and the accompanying materials are licensed and made available under
8 # the terms and conditions of the BSD License that accompanies this distribution.
9 # The full text of the license may be found at
10 # http://opensource.org/licenses/bsd-license.php.
11 #
12 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
14 #
15 ##
16
17
18 [Defines]
19 DEC_SPECIFICATION = 0x00010005
20 PACKAGE_NAME = MdeModulePkg
21 PACKAGE_UNI_FILE = MdeModulePkg.uni
22 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
23 PACKAGE_VERSION = 0.94
24
25 [Includes]
26 Include
27
28
29 [LibraryClasses]
30 ## @libraryclass IpIo layer upon EFI IP4 Protocol.
31 # This library is only intended to be used by UEFI network stack modules.
32 IpIoLib|Include/Library/IpIoLib.h
33
34 ## @libraryclass Basic function for UEFI network stack.
35 # This library is only intended to be used by UEFI network stack modules.
36 NetLib|Include/Library/NetLib.h
37
38 ## @libraryclass The helper routines to access UDP service.
39 # This library is only intended to be used by UEFI network stack modules.
40 UdpIoLib|Include/Library/UdpIoLib.h
41
42 ## @libraryclass The helper routines to access TCP service.
43 # This library is only intended to be used by UEFI network stack modules.
44 TcpIoLib|Include/Library/TcpIoLib.h
45
46 ## @libraryclass Defines a set of methods to reset whole system.
47 ResetSystemLib|Include/Library/ResetSystemLib.h
48
49 ## @libraryclass Defines a set of methods related do S3 mode.
50 # This library class is no longer used and modules using this library should
51 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
52 S3Lib|Include/Library/S3Lib.h
53
54 ## @libraryclass Defines a set of methods related recovery mode.
55 # This library class is no longer used and modules using this library should
56 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
57 RecoveryLib|Include/Library/RecoveryLib.h
58
59 ## @libraryclass Provides HII related functions.
60 HiiLib|Include/Library/HiiLib.h
61
62 ## @libraryclass Defines a set of interfaces on how to process capusle image update.
63 CapsuleLib|Include/Library/CapsuleLib.h
64
65 ## @libraryclass Library for Deferred Procedure Calls.
66 DpcLib|Include/Library/DpcLib.h
67
68 ## @libraryclass Provides global variables that are pointers
69 # to the UEFI HII related protocols.
70 #
71 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
72
73 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
74 #
75 SecurityManagementLib|Include/Library/SecurityManagementLib.h
76
77 ## @libraryclass OEM status code libary is used to report status code to OEM device.
78 #
79 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
80
81 ## @libraryclass Debug Agent is used to provide soft debug capability.
82 #
83 DebugAgentLib|Include/Library/DebugAgentLib.h
84
85 ## @libraryclass Provide platform specific hooks.
86 #
87 PlatformHookLib|Include/Library/PlatformHookLib.h
88
89 ## @libraryclass Provide platform specific hooks for SMM core.
90 #
91 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
92
93 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
94 #
95 LockBoxLib|Include/Library/LockBoxLib.h
96
97 ## @libraryclass Provide the CPU exception handler.
98 #
99 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
100
101 ## @libraryclass Provides platform specific display interface.
102 #
103 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
104
105 [Guids]
106 ## MdeModule package token space guid
107 # Include/Guid/MdeModulePkgTokenSpace.h
108 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
109
110 ## Hob guid for Pcd DataBase
111 # Include/Guid/PcdDataBaseHobGuid.h
112 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
113
114 ## Guid for PCD DataBase signature.
115 # Include/Guid/PcdDataBaseSignatureGuid.h
116 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
117
118 ## Guid for EDKII implementation GUIDed opcodes
119 # Include/Guid/MdeModuleHii.h
120 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
121
122 ## Guid for Framework vfr GUIDed opcodes.
123 # Include/Guid/MdeModuleHii.h
124 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
125
126 ## Guid to specify the System Non Volatile FV
127 # Include/Guid/SystemNvDataGuid.h
128 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
129
130 ## GUID used as the signature of FTW working block header.
131 # Include/Guid/SystemNvDataGuid.h
132 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
133
134 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
135 # Include/Guid/FaultTolerantWrite.h
136 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
137
138 ## Guid specify the device is the console out device.
139 # Include/Guid/ConsoleOutDevice.h
140 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
141
142 ## Guid specify the device is the console in device.
143 # Include/Guid/ConsoleInDevice.h
144 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
145
146 ## Hob and Variable guid specify the platform memory type information.
147 # Include/Guid/MemoryTypeInformation.h
148 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
149
150 ## Capsule update hob and variable guid
151 # Include/Guid/CapsuleVendor.h
152 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
153
154 ## Guid specifiy the device is the StdErr device.
155 # Include/Guid/StandardErrorDevice.h
156 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
157
158 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
159 # Include/Guid/VariableFormat.h
160 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
161
162 # Include/Guid/VariableIndexTable.h
163 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
164
165 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
166 # Include/Guid/SmmVariableCommon.h
167 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
168
169 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
170 # Include/Guid/Performance.h
171 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
172 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
173 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
174 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
175
176 ## Guid is defined for CRC32 encapsulation scheme.
177 # Include/Guid/Crc32GuidedSectionExtraction.h
178 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
179
180 ## Include/Guid/NicIp4ConfigNvData.h
181 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
182
183 ## Include/Guid/StatusCodeCallbackGuid.h
184 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
185
186 ## GUID identifies status code records HOB that originate from the PEI status code
187 # Include/Guid/MemoryStatusCodeRecord.h
188 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
189
190 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
191 # Include/Guid/StatusCodeDataTypeDebug.h
192 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
193
194 ## A configuration Table Guid for Load module at fixed address
195 # Include/Guid/LoadModuleAtFixedAddress.h
196 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
197
198 ## GUID used to store the global debug mask value into an EFI Variable
199 # Include/Guid/DebugMask.h
200 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
201
202 ## Event for the DXE Core to signal idle events
203 # Include/Guid/EventIdle.h
204 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
205
206 ## Include/Guid/RecoveryDevice.h
207 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
208
209 ## Include/Guid/RecoveryDevice.h
210 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
211
212 ## Include/Guid/RecoveryDevice.h
213 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
214
215 ## Include/Guid/RecoveryDevice.h
216 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
217
218 ## Include/Guid/SmmLockBox.h
219 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
220
221 ## Include/Guid/AcpiS3Context.h
222 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
223
224 ## Include/Guid/AcpiS3Context.h
225 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
226
227 ## Include/Guid/BootScriptExecutorVariable.h
228 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
229 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
230
231 ## Include/Guid/UsbKeyBoardLayout.h
232 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
233 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
234
235 ## Include/Guid/HiiResourceSampleHii.h
236 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
237
238 ## Include/Guid/DriverSampleHii.h
239 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
240 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
241 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
242
243 ## Include/Guid/PlatDriOverrideHii.h
244 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
245
246 ## Include/Guid/Ip4ConfigHii.h
247 gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}
248
249 ## Include/Guid/VlanConfigHii.h
250 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
251
252 ## Include/Guid/Ip4IScsiConfigHii.h
253 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
254 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
255
256 ## Include/Guid/ZeroGuid.h
257 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
258
259 ## Include/Guid/MtcVendor.h
260 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
261
262 ## Guid for Firmware Performance Data Table (FPDT) implementation.
263 # Include/Guid/FirmwarePerformance.h
264 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
265 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
266
267 ## Include/Guid/ExitBootServiceFailed.h
268 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
269
270 ## Include/Guid/ConnectConInEvent.h
271 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
272
273 ## Include/Guid/StatusCodeDataTypeVariable.h
274 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
275
276 ## Include/Guid/MemoryProfile.h
277 gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
278
279 [Ppis]
280 ## Include/Ppi/AtaController.h
281 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
282
283 ## Include/Ppi/UsbHostController.h
284 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
285
286 ## Include/Ppi/Usb2HostController.h
287 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
288
289 ## Include/Ppi/UsbController.h
290 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
291
292 ## Include/Ppi/UsbIo.h
293 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
294
295 ## Include/Ppi/Capsule.h
296 gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
297
298 ## Include/Ppi/SecPerformance.h
299 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
300
301 ## Include/Ppi/SmmCommunication.h
302 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
303
304 ## Include/Ppi/SmmAccess.h
305 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
306
307 ## Include/Ppi/SmmControl.h
308 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
309
310 ## Include/Ppi/PostBootScriptTable.h
311 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
312
313 ## Include/Ppi/SerialPortPei.h
314 gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
315
316 [Protocols]
317 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
318 # Include/Protocol/LoadPe32Image.h
319 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
320 # If developer need implement such functionality, they should use BasePeCoffLib.
321 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
322
323 ## Print protocol defines basic print functions to print the format unicode and ascii string.
324 # Include/Protocol/Print2.h
325 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
326
327 ## This protocol defines the generic memory test interfaces in Dxe phase.
328 # Include/Protocol/GenericMemoryTest.h
329 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
330
331 ## Include/Protocol/Dpc.h
332 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
333
334 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
335 # Include/Protocol/FaultTolerantWrite.h
336 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
337
338 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
339 # Include/Protocol/SmmFaultTolerantWrite.h
340 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
341
342 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
343 # Include/Protocol/SwapAddressRange.h
344 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
345
346 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
347 # Include/Protocol/SmmSwapAddressRange.h
348 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
349
350 ## This protocol is intended for use as a means to store data in the EFI SMM environment.
351 # Include/Protocol/SmmVariableProtocol.h
352 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
353
354 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
355 # Include/Protocol/VariableLock.h
356 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
357
358 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
359 # Include/Protocol/SmmFirmwareVolumeBlock.h
360 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
361
362 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
363 # Include/Guid/DebugMask.h
364 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
365
366 ## Include/Protocol/LockBox.h
367 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
368
369 ## Include/Protocol/FormBrowserEx.h
370 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
371
372 ## Include/Protocol/EbcVmTest.h
373 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
374
375 ## Include/Protocol/EbcSimpleDebugger.h
376 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
377
378 ## Include/Protocol/BootLogo.h
379 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
380
381 ## Include/Protocol/DisplayProtocol.h
382 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
383
384 ## Include/Protocol/FormBrowserEx2.h
385 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
386
387 #
388 # [Error.gEfiMdeModulePkgTokenSpaceGuid]
389 # 0x80000001 | Invalid value provided.
390 # 0x80000002 | Reserved bits must be set to zero.
391 # 0x80000003 | Incorrect progress code provided.
392 # 0x80000004 | Invalid foreground color specified.
393 # 0x80000005 | Invalid background color specified.
394 # 0x80000006 | Incorrect error code provided.
395 #
396
397 [PcdsFeatureFlag]
398 ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
399 # TRUE - Supports update capsule across a system reset.<BR>
400 # FALSE - Does not support update capsule across a system reset.<BR>
401 # @Prompt Enable update capsule across a system reset.
402 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
403
404 ## Indicates if all PCD PPI services will be enabled.<BR><BR>
405 # TRUE - All PCD PPI services will be produced.<BR>
406 # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
407 # @Prompt Enable full PEI PCD services.
408 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
409
410 ## Indicates if the Device Path To Text Protocol should be produced by the platform.
411 # It can be disabled to save size.<BR><BR>
412 # TRUE - Device Path To Text Protocol will be produced.<BR>
413 # FALSE - Device Path To Text Protocol will not be produced.<BR>
414 # @Prompt Enable Device Path to Text support.
415 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
416
417 ## Indicates if the Device Path From Text Protocol should be produced by the platform.
418 # It can be disabled to save size.<BR><BR>
419 # TRUE - Device Path From Text Protocol will be produced.<BR>
420 # FALSE - Device Path From Text Protocol will not be produced.<BR>
421 # @Prompt Enable Device Path From Text support.
422 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
423
424 ## Indicates if the statistics about variable usage will be collected. This information is
425 # stored as a vendor configuration table into the EFI system table.
426 # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
427 # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
428 # TRUE - Statistics about variable usage will be collected.<BR>
429 # FALSE - Statistics about variable usage will not be collected.<BR>
430 # @Prompt Enable variable statistics collection.
431 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
432
433 ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
434 # TRUE - Installs Unicode Collation Protocol.<BR>
435 # FALSE - Does not install Unicode Collation Protocol.<BR>
436 # @Prompt Enable Unicode Collation support.
437 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
438
439 ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
440 # TRUE - Installs Unicode Collation 2 Protocol.<BR>
441 # FALSE - Does not install Unicode Collation 2 Protocol.<BR>
442 # @Prompt Enable Unicode Collation 2 support.
443 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
444
445 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
446 # It could be set FALSE to save size.<BR><BR>
447 # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
448 # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
449 # @Prompt Enable ConOut GOP support.
450 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
451
452 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
453 # It could be set FALSE to save size.<BR><BR>
454 # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
455 # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
456 # @Prompt Enable ConOut UGA support.
457 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
458
459 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
460 # This PCD is used to tune PEI phase performance to reduce the search image time.
461 # It can be set according to the generated image section type.<BR><BR>
462 # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
463 # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
464 # @Prompt PeiCore search TE section first.
465 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
466
467 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
468 # interrupt to access usb device in the case of absence of usb stack.
469 # DUET platform requires the token to be TRUE.<BR><BR>
470 # TRUE - Turn off usb legacy support.<BR>
471 # FALSE - Does not turn off usb legacy support.<BR>
472 # @Prompt Turn off USB legacy support.
473 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
474
475 ## Indicates if HiiImageProtocol will be installed.
476 # FALSE is for size reduction.<BR><BR>
477 # TRUE - Installs HiiImageProtocol.<BR>
478 # FALSE - Does not install HiiImageProtocol.<BR>
479 # @Prompt Enable HII image support.
480 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
481
482 ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
483 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved
484 # from HII database.<BR><BR>
485 # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>
486 # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
487 # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
488 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
489
490 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
491 # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
492 # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
493 # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
494 # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
495 # @Prompt Enable framework backward compatibility support.
496 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
497
498 ## Indicates if HelloWorld Application will print the verbose information.
499 # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
500 # TRUE - HelloWorld Application will print the verbose information.<BR>
501 # FALSE - HelloWorld Application will not print the verbose information.<BR>
502 # @Prompt Enable HelloWorld print.
503 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
504
505 ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
506 # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>
507 # FALSE - Only FTW Write service is available.<BR>
508 # @Prompt Enable FULL FTW services.
509 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
510
511 ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
512 # TRUE - DXE IPL will support UEFI decompression.<BR>
513 # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
514 # @Prompt Enable UEFI decompression support in DXE IPL.
515 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
516
517 ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
518 # TRUE - PciBus driver supports the hot plug device.<BR>
519 # FALSE - PciBus driver doesn't support the hot plug device.<BR>
520 # @Prompt Enable PciBus hot plug device support.
521 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
522
523 ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
524 # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
525 # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
526 # @Prompt Enable PCI bridge IO alignment probe.
527 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
528
529 ## Indicates if StatusCode is reported via Serial port.<BR><BR>
530 # TRUE - Reports StatusCode via Serial port.<BR>
531 # FALSE - Does not report StatusCode via Serial port.<BR>
532 # @Prompt Enable StatusCode via Serial port.
533 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
534
535 ## Indicates if StatusCode is stored in memory.
536 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
537 # TRUE - Stores StatusCode in memory.<BR>
538 # FALSE - Does not store StatusCode in memory.<BR>
539 # @Prompt Enable StatusCode via memory.
540 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
541
542 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
543 # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>
544 # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
545 # @Prompt Enable PEI StatusCode replay in DXE phase
546 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
547
548 ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
549 # TRUE - Installs ACPI SDT protocol.<BR>
550 # FALSE - Does not install ACPI SDT protocol.<BR>
551 # @Prompt Enable ACPI SDT support.
552 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
553
554 ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
555 # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
556 # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
557 # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
558 # @Prompt Enable unaligned PCI I/O support.
559 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
560
561 ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
562 # TRUE - TEXT statement will always be set to GrayOut.<BR>
563 # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
564 # @Prompt Always GrayOut TEXT statement.
565 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
566
567 ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
568 # TRUE - The unselectable menu will be set to GrayOut.<BR>
569 # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
570 # @Prompt GrayOut read only menu.
571 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
572
573 ## Indicates if recovery from IDE disk will be supported.<BR><BR>
574 # TRUE - Supports recovery from IDE disk.<BR>
575 # FALSE - Does not support recovery from IDE disk.<BR>
576 # @Prompt Enable recovery on IDE disk.
577 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
578
579 ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
580 # TRUE - Supports recovery from FAT floppy disk.<BR>
581 # FALSE - Does not support recovery from FAT floppy disk.<BR>
582 # @Prompt Enable recovery on FAT floppy disk.
583 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
584
585 ## Indicates if recovery from data CD will be supported.<BR><BR>
586 # TRUE - Supports recovery from data CD.<BR>
587 # FALSE - Does not support recovery from data CD.<BR>
588 # @Prompt Enable recovery on data CD.
589 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
590
591 ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
592 # TRUE - Supports recovery from USB disk.<BR>
593 # FALSE - Does not support recovery from USB disk.<BR>
594 # @Prompt Enable recovery on FAT USB disk.
595 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
596
597 ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
598 # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>
599 # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
600 # @Prompt Enable S3 performance data support.
601 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
602
603 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
604 ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
605 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
606 # is built in firmware.<BR><BR>
607 # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
608 # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
609 # @Prompt DxeIpl switch to long mode.
610 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
611
612 ## Indicates if DxeIpl should rebuild page tables. This flag only
613 # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
614 # TRUE - DxeIpl will rebuild page tables.<BR>
615 # FALSE - DxeIpl will not rebuild page tables.<BR>
616 # @Prompt DxeIpl rebuild page tables.
617 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
618
619 [PcdsFixedAtBuild]
620 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
621 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
622 # 0: Disable the feature.<BR>
623 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
624 # @Prompt Enable LMFA feature.
625 # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
626 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
627
628 ## Progress Code for OS Loader LoadImage start.<BR><BR>
629 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
630 # @Prompt Progress Code for OS Loader LoadImage start.
631 # @ValidList 0x80000003 | 0x03058000
632 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
633
634 ## Progress Code for OS Loader StartImage start.<BR><BR>
635 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
636 # @Prompt Progress Code for OS Loader StartImage start.
637 # @ValidList 0x80000003 | 0x03058001
638 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
639
640 ## Progress Code for S3 Suspend start.<BR><BR>
641 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>
642 # @Prompt Progress Code for S3 Suspend start.
643 # @ValidList 0x80000003 | 0x03078000
644 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
645
646 ## Progress Code for S3 Suspend end.<BR><BR>
647 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>
648 # @Prompt Progress Code for S3 Suspend end.
649 # @ValidList 0x80000003 | 0x03078001
650 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
651
652 ## Error Code for SetVariable failure.<BR><BR>
653 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
654 # @Prompt Error Code for SetVariable failure.
655 # @ValidList 0x80000006 | 0x03058002
656 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
657
658 [PcdsFixedAtBuild, PcdsPatchableInModule]
659 ## Dynamic type PCD can be registered callback function for Pcd setting action.
660 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
661 # for a dynamic PCD used in PEI phase.
662 # @Prompt Max PEI PCD callback number per PCD entry.
663 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
664
665 ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress
666 # to store PCD value.
667 # @Prompt VPD base address.
668 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
669
670 ## Maximum number of FV is supported by PeiCore's dispatching.
671 # @Prompt Maximum number of FV supported by PeiCore.
672 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
673
674 ## Maximum File count in every FV is supported by PeiCore's dispatching.
675 # PeiCore supported File type includes PEIM, Combined PEIM and FV.
676 # @Prompt Maximum File count per FV supported by PeiCore.
677 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
678
679 ## Maximum stack size for PeiCore.
680 # @Prompt Maximum stack size for PeiCore.
681 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
682
683 ## Maximum PPI count is supported by PeiCore's PPI database.
684 # @Prompt Maximum PPI count supported by PeiCore.
685 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
686
687 ## The maximum size of a single non-HwErr type variable.
688 # @Prompt Maximum variable size.
689 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
690
691 ## The maximum size of single hardware error record variable.<BR><BR>
692 # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
693 # In IA64 platforms, this value should be larger than 128KB.<BR>
694 # @Prompt Maximum HwErr variable size.
695 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
696
697 ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize.
698 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
699 # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.
700 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
701 # @Prompt HwErr variable storage size.
702 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
703
704 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
705 # @Prompt Variable storage size.
706 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
707
708 ## FFS filename to find the ACPI tables.
709 # @Prompt FFS name of ACPI tables storage.
710 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
711
712 ## FFS filename to find the capsule coalesce image.
713 # @Prompt FFS name of capsule coalesce image.
714 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
715
716 ## Maximum number of performance log entries during PEI phase.
717 # @Prompt Maximum number of PEI performance log entries.
718 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
719
720 ## RTC Update Timeout Value(microsecond).
721 # @Prompt RTC Update Timeout Value.
722 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
723
724 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
725 # TRUE - 16550 serial port registers are in MMIO space.<BR>
726 # FALSE - 16550 serial port registers are in I/O space.<BR>
727 # @Prompt Serial port registers use MMIO.
728 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
729
730 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
731 # TRUE - 16550 serial port hardware flow control will be enabled.<BR>
732 # FALSE - 16550 serial port hardware flow control will be disabled.<BR>
733 # @Prompt Enable serial port hardware flow control.
734 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
735
736 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
737 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
738 # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
739 # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
740 # @Prompt Enable serial port cable detetion.
741 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
742
743 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
744 # @Prompt Base address of serial port registers.
745 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
746
747 ## Baud rate for the 16550 serial port. Default is 115200 baud.
748 # @Prompt Baud rate for serial port.
749 # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
750 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
751
752 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
753 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
754 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
755 # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
756 # BIT7..BIT6 - Reserved. Must be 0.<BR>
757 #
758 # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
759 # @Prompt Serial port Line Control settings.
760 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
761 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
762
763 ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
764 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>
765 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>
766 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>
767 # BIT4..BIT3 - Reserved. Must be 0.<BR>
768 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>
769 # BIT7..BIT6 - Reserved. Must be 0.<BR>
770 #
771 # Default is to enable and clear all FIFOs.<BR>
772 # @Prompt Serial port FIFO Control settings.
773 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
774 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
775
776 ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
777 # to handle all link layers. If the value is non zero, the PCD value will be used as block size.
778 # @Prompt TFTP block size.
779 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
780
781 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
782 # structure. The default value for this PCD is 0, which means that the DXE Core
783 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
784 # boundary as close to the top of memory as feasible. If this PCD is set to a
785 # value other than 0, then the DXE Core will first attempt to allocate the
786 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
787 # by this PCD, and if that allocation fails, retry the allocation on a 4MB
788 # boundary as close to the top of memory as feasible.
789 # @Prompt Maximum Efi System Table Pointer address.
790 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
791
792 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
793 # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>
794 # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
795 # @Prompt Shadow Peim On S3 Boot.
796 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
797
798 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
799 # @Prompt Default OEM ID for ACPI table creation.
800 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
801
802 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
803 # @Prompt Default OEM Table ID for ACPI table creation.
804 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
805
806 ## Default OEM Revision for ACPI table creation.
807 # @Prompt Default OEM Revision for ACPI table creation.
808 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
809
810 ## Default Creator ID for ACPI table creation.
811 # @Prompt Default Creator ID for ACPI table creation.
812 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
813
814 ## Default Creator Revision for ACPI table creation.
815 # @Prompt Default Creator Revision for ACPI table creation.
816 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
817
818 ## The mask is used to control memory profile behavior.<BR><BR>
819 # BIT0 - Enable UEFI memory profile.<BR>
820 # BIT1 - Enable SMRAM profile.<BR>
821 # @Prompt Memory Profile Property.
822 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0
823 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
824
825 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
826 # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
827 #
828 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
829 # EfiReservedMemoryType 0x0001<BR>
830 # EfiLoaderCode 0x0002<BR>
831 # EfiLoaderData 0x0004<BR>
832 # EfiBootServicesCode 0x0008<BR>
833 # EfiBootServicesData 0x0010<BR>
834 # EfiRuntimeServicesCode 0x0020<BR>
835 # EfiRuntimeServicesData 0x0040<BR>
836 # EfiConventionalMemory 0x0080<BR>
837 # EfiUnusableMemory 0x0100<BR>
838 # EfiACPIReclaimMemory 0x0200<BR>
839 # EfiACPIMemoryNVS 0x0400<BR>
840 # EfiMemoryMappedIO 0x0800<BR>
841 # EfiMemoryMappedIOPortSpace 0x1000<BR>
842 # EfiPalCode 0x2000<BR>
843 # OS Reserved 0x8000000000000000<BR>
844 #
845 # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
846 #
847 # @Prompt Memory profile memory type.
848 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
849
850 ## UART clock frequency is for the baud rate configuration.
851 # @Prompt Serial Port Clock Rate.
852 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
853
854 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
855 # information that describes the path that contains zero or more PCI to PCI briges
856 # followed by a PCI serial device. Each array entry is 4-bytes in length. The
857 # first byte is the PCI Device Number, then second byte is the PCI Function Number,
858 # and the last two bytes are the offset to the PCI power management capabilities
859 # register used to manage the D0-D3 states. If a PCI power management capabilities
860 # register is not present, then the last two bytes in the offset is set to 0. The
861 # array is terminated by an array entry with a PCI Device Number of 0xFF. For a
862 # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
863 # @Prompt Pci Serial Device Info
864 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
865
866 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
867 # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
868 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
869
870 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
871 ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
872 # This PCD could be set to 0 then console output would be at max column and max row.
873 # @Prompt Console output row.
874 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
875
876 ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.
877 # This PCD could be set to 0 then console output would be at max column and max row.
878 # @Prompt Console output column.
879 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
880
881 ## This PCD defines the video horizontal resolution.
882 # If this PCD is set to 0 then video resolution would be at highest resolution.
883 # @Prompt Video horizontal resolution.
884 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
885
886 ## This PCD defines the video vertical resolution.
887 # If this PCD is set to 0 then video resolution would be at highest resolution.
888 # @Prompt Video vertical resolution.
889 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
890
891 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
892 ## Base address of the NV variable range in flash device.
893 # @Prompt Base address of flash NV variable range.
894 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
895
896 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
897 # The root cause is that variable driver will use FTW protocol to reclaim variable region.
898 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
899 # be reflushed through the manner of fault tolerant write.
900 # @Prompt Size of flash NV variable range.
901 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
902
903 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
904 # @Prompt Base address of flash FTW spare block range.
905 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
906
907 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
908 # The root cause is that variable driver will use FTW protocol to reclaim variable region.
909 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
910 # be reflushed through the manner of fault tolerant write.
911 # @Prompt Size of flash FTW spare block range.
912 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
913
914 ## Base address of the FTW working block range in flash device.
915 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
916 # @Prompt Base address of flash FTW working block range.
917 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
918
919 ## Size of the FTW working block range.
920 # If the value is less than one block size, the work space range should not span blocks.
921 # If the value is larger than one block size, it should be block size aligned.
922 # @Prompt Size of flash FTW working block range.
923 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
924
925 ## 64-bit Base address of the NV variable range in flash device.
926 # @Prompt 64-bit Base address of flash NV variable range.
927 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
928
929 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
930 # @Prompt 64-bit Base address of flash FTW spare block range.
931 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
932
933 ## 64-bit Base address of the FTW working block range in flash device.
934 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
935 # @Prompt 64-bit Base address of flash FTW working block range.
936 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
937
938 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
939 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
940 # @Prompt Reserved memory range for EMU variable NV storage.
941 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
942
943 ## This PCD defines the times to print hello world string.
944 # This PCD is a sample to explain UINT32 PCD usage.
945 # @Prompt HellowWorld print times.
946 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
947
948 ## This PCD defines the HelloWorld print string.
949 # This PCD is a sample to explain String typed PCD usage.
950 # @Prompt HelloWorld print string.
951 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
952
953 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
954 # The default max size is 100MB (0x6400000) for more than one large capsule images.
955 # @Prompt Max size of populated capsule.
956 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
957
958 ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
959 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
960 # @Prompt Max size of non-populated capsule.
961 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
962
963 ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
964 # @Prompt Firmware vendor.
965 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
966
967 ## Firmware revision that is the default revision filled into the EFI System Table.
968 # @Prompt Firmware revision.
969 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
970
971 ## Null-terminated Unicode string that describes the firmware version.
972 # @Prompt Firmware version string.
973 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
974
975 ## Null-terminated Unicode string that contains the date the firmware was released
976 # @Prompt Firmware release data string.
977 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
978
979 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
980 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
981 # The default value in PeiPhase is 1 KBytes.<BR>
982 # The default value in DxePhase is 128 KBytes.<BR>
983 # @Prompt StatusCode memory size.
984 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
985
986 ## Indicates if to reset system when memory type information changes.<BR><BR>
987 # TRUE - Resets system when memory type information changes.<BR>
988 # FALSE - Does not reset system when memory type information changes.<BR>
989 # @Prompt Reset on memory type information change.
990 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
991
992 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
993 # Only following values defined in UEFI specification are valid:<BR><BR>
994 # 0x00 (EFI_BLACK)<BR>
995 # 0x01 (EFI_BLUE)<BR>
996 # 0x02 (EFI_GREEN)<BR>
997 # 0x03 (EFI_CYAN)<BR>
998 # 0x04 (EFI_RED)<BR>
999 # 0x05 (EFI_MAGENTA)<BR>
1000 # 0x06 (EFI_BROWN)<BR>
1001 # 0x07 (EFI_LIGHTGRAY)<BR>
1002 # 0x08 (EFI_DARKGRAY)<BR>
1003 # 0x09 (EFI_LIGHTBLUE)<BR>
1004 # 0x0A (EFI_LIGHTGREEN)<BR>
1005 # 0x0B (EFI_LIGHTCYAN)<BR>
1006 # 0x0C (EFI_LIGHTRED)<BR>
1007 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1008 # 0x0E (EFI_YELLOW)<BR>
1009 # 0x0F (EFI_WHITE)<BR>
1010 # @Prompt Foreground color for browser subtile.
1011 # @ValidRange 0x80000004 | 0x00 - 0x0F
1012 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
1013
1014 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
1015 # Only following values defined in UEFI specification are valid:<BR><BR>
1016 # 0x00 (EFI_BLACK)<BR>
1017 # 0x01 (EFI_BLUE)<BR>
1018 # 0x02 (EFI_GREEN)<BR>
1019 # 0x03 (EFI_CYAN)<BR>
1020 # 0x04 (EFI_RED)<BR>
1021 # 0x05 (EFI_MAGENTA)<BR>
1022 # 0x06 (EFI_BROWN)<BR>
1023 # 0x07 (EFI_LIGHTGRAY)<BR>
1024 # 0x08 (EFI_DARKGRAY)<BR>
1025 # 0x09 (EFI_LIGHTBLUE)<BR>
1026 # 0x0A (EFI_LIGHTGREEN)<BR>
1027 # 0x0B (EFI_LIGHTCYAN)<BR>
1028 # 0x0C (EFI_LIGHTRED)<BR>
1029 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1030 # 0x0E (EFI_YELLOW)<BR>
1031 # 0x0F (EFI_WHITE)<BR>
1032 # @Prompt Foreground color for browser field.
1033 # @ValidRange 0x80000004 | 0x00 - 0x0F
1034 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
1035
1036 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
1037 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
1038 # 0x00 (EFI_BLACK)<BR>
1039 # 0x01 (EFI_BLUE)<BR>
1040 # 0x02 (EFI_GREEN)<BR>
1041 # 0x03 (EFI_CYAN)<BR>
1042 # 0x04 (EFI_RED)<BR>
1043 # 0x05 (EFI_MAGENTA)<BR>
1044 # 0x06 (EFI_BROWN)<BR>
1045 # 0x07 (EFI_LIGHTGRAY)<BR>
1046 # 0x08 (EFI_DARKGRAY)<BR>
1047 # 0x09 (EFI_LIGHTBLUE)<BR>
1048 # 0x0A (EFI_LIGHTGREEN)<BR>
1049 # 0x0B (EFI_LIGHTCYAN)<BR>
1050 # 0x0C (EFI_LIGHTRED)<BR>
1051 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1052 # 0x0E (EFI_YELLOW)<BR>
1053 # 0x0F (EFI_WHITE)<BR>
1054 # @Prompt Foreground color for highlighted browser field.
1055 # @ValidRange 0x80000004 | 0x00 - 0x0F
1056 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
1057
1058 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
1059 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
1060 # 0x00 (EFI_BACKGROUND_BLACK)<BR>
1061 # 0x10 (EFI_BACKGROUND_BLUE)<BR>
1062 # 0x20 (EFI_BACKGROUND_GREEN)<BR>
1063 # 0x30 (EFI_BACKGROUND_CYAN)<BR>
1064 # 0x40 (EFI_BACKGROUND_RED)<BR>
1065 # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>
1066 # 0x60 (EFI_BACKGROUND_BROWN)<BR>
1067 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
1068 # @Prompt Background color for highlighted browser field.
1069 # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
1070 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
1071
1072 ## Time in second to delay for SATA devices to spin-up for recovery.
1073 # @Prompt SATA spin-up delay time in second for recovery path.
1074 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
1075
1076 ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold
1077 # runtime created S3 boot script entries. The default page number is 2. When changing the value of this
1078 # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot
1079 # script node created in runtime phase.
1080 # @Prompt Reserved page number for S3 Boot Script Runtime Table.
1081 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
1082
1083 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
1084 # The default size is 32K. When changing the value of this PCD, the platform developer should
1085 # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
1086 # @Prompt Stack size for CapsulePei transfer to long mode.
1087 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
1088
1089 ## Indicates if 1G page table will be enabled.<BR><BR>
1090 # TRUE - 1G page table will be enabled.<BR>
1091 # FALSE - 1G page table will not be enabled.<BR>
1092 # @Prompt Enable 1G page table support.
1093 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
1094
1095 ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
1096 # TRUE - Single Root I/O virtualization is supported.<BR>
1097 # FALSE - Single Root I/O virtualization is not supported.<BR>
1098 # @Prompt Enable SRIOV support.
1099 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
1100
1101 ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
1102 # TRUE - Alternative Routing-ID is supported.<BR>
1103 # FALSE - Alternative Routing-ID is not supported.<BR>
1104 # @Prompt Enable ARI support.
1105 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
1106
1107 ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
1108 # TRUE - Multi Root I/O virtualization is supported.<BR>
1109 # FALSE - Multi Root I/O virtualization is not supported.<BR>
1110 # @Prompt Enable MRIOV support.
1111 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
1112
1113 ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
1114 # BITN set indicates 2 of n+12 power<BR>
1115 # BIT0 set indicates 4KB alignment<BR>
1116 # BIT1 set indicates 8KB alignment<BR>
1117 # @Prompt SRIOV system page size.
1118 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
1119
1120 ## SMBIOS version.
1121 # @Prompt SMBIOS version.
1122 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055
1123
1124 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
1125 # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
1126 # @Prompt Pad size for extension FPDT boot records.
1127 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
1128
1129 ## Indicates if ConIn device are connected on demand.<BR><BR>
1130 # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
1131 # by Consplitter should be called before any real key read operation.<BR>
1132 # FALSE - ConIn device may be connected normally during BDS.<BR>
1133 # @Prompt ConIn connect on demand.
1134 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
1135
1136 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
1137 # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
1138 # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
1139 # @Prompt Enable ATA S.M.A.R.T feature.
1140 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
1141
1142 ## Indicates if full PCI enumeration is disabled.<BR><BR>
1143 # TRUE - Full PCI enumeration is disabled.<BR>
1144 # FALSE - Full PCI enumeration is not disabled.<BR>
1145 # @Prompt Disable full PCI enumeration.
1146 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
1147
1148 ## Disk I/O - Number of Data Buffer block.
1149 # Define the size in block of the pre-allocated buffer. It provide better
1150 # performance for large Disk I/O requests.
1151 # @Prompt Disk I/O - Number of Data Buffer block.
1152 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
1153
1154 [PcdsPatchableInModule]
1155 ## Specify memory size with page number for PEI code when
1156 # Loading Module at Fixed Address feature is enabled.
1157 # The value will be set by the build tool.
1158 # @Prompt LMFA PEI code page number.
1159 # @ValidList 0x80000001 | 0
1160 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
1161
1162 ## Specify memory size with page number for DXE boot time code when
1163 # Loading Module at Fixed Address feature is enabled.
1164 # The value will be set by the build tool.
1165 # @Prompt LMFA DXE boot code page number.
1166 # @ValidList 0x80000001 | 0
1167 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
1168
1169 ## Specify memory size with page number for DXE runtime code when
1170 # Loading Module at Fixed Address feature is enabled.
1171 # The value will be set by the build tool.
1172 # @Prompt LMFA DXE runtime code page number.
1173 # @ValidList 0x80000001 | 0
1174 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
1175
1176 ## Specify memory size with page number for SMM code when
1177 # Loading Module at Fixed Address feature is enabled.
1178 # The value will be set by the build tool.
1179 # @Prompt LMFA SMM code page number.
1180 # @ValidList 0x80000001 | 0
1181 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
1182
1183 [PcdsDynamic, PcdsDynamicEx]
1184 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
1185 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1186 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1187 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1188 # @Prompt S3 Boot Script Table Private Data pointer.
1189 # @ValidList 0x80000001 | 0x0
1190 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
1191
1192 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
1193 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1194 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1195 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1196 # @Prompt S3 Boot Script Table Private Smm Data pointer.
1197 # @ValidList 0x80000001 | 0x0
1198 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
1199
1200 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
1201 # Virtual to Physical mapping according to the processor physical address bits.
1202 # @Prompt Identify Mapping Page Table pointer.
1203 # @ValidList 0x80000001 | 0x0
1204 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
1205
1206 [UserExtensions.TianoCore."ExtraFiles"]
1207 MdeModulePkgExtra.uni