MdeModulePkg/MdeModulePkg.dec

   1 ## @file  MdeModulePkg.dec
   2 # This package provides the modules that conform to UEFI/PI Industry standards.
   3 # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
   4 # and libraries instances, which are used for those modules.
   5 #
   6 # Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
   7 # Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
   8 # (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
   9 # Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
  10 #
  11 # This program and the accompanying materials are licensed and made available under
  12 # the terms and conditions of the BSD License that accompanies this distribution.
  13 # The full text of the license may be found at
  14 # http://opensource.org/licenses/bsd-license.php.
  15 #
  16 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  17 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  18 #
  19 ##
  20
  21
  22 [Defines]
  23   DEC_SPECIFICATION              = 0x00010005
  24   PACKAGE_NAME                   = MdeModulePkg
  25   PACKAGE_UNI_FILE               = MdeModulePkg.uni
  26   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  27   PACKAGE_VERSION                = 0.97
  28
  29 [Includes]
  30   Include
  31
  32
  33 [LibraryClasses]
  34   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  35   #   This library is only intended to be used by UEFI network stack modules.
  36   IpIoLib|Include/Library/IpIoLib.h
  37
  38   ##  @libraryclass  Basic function for UEFI network stack.
  39   #   This library is only intended to be used by UEFI network stack modules.
  40   NetLib|Include/Library/NetLib.h
  41
  42   ##  @libraryclass  The helper routines to access UDP service.
  43   #   This library is only intended to be used by UEFI network stack modules.
  44   UdpIoLib|Include/Library/UdpIoLib.h
  45
  46   ##  @libraryclass  The helper routines to access TCP service.
  47   #   This library is only intended to be used by UEFI network stack modules.
  48   TcpIoLib|Include/Library/TcpIoLib.h
  49
  50   ##  @libraryclass  The helper routines to access HTTP service.
  51   #   This library is only intended to be used by UEFI network stack modules.
  52   HttpLib|Include/Library/HttpLib.h
  53
  54   ##  @libraryclass  Defines a set of methods to reset whole system.
  55   ResetSystemLib|Include/Library/ResetSystemLib.h
  56
  57   ##  @libraryclass  Defines a set of methods related do S3 mode.
  58   #   This library class is no longer used and modules using this library should
  59   #   directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
  60   S3Lib|Include/Library/S3Lib.h
  61
  62   ##  @libraryclass  Defines a set of methods related recovery mode.
  63   #   This library class is no longer used and modules using this library should
  64   #   directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
  65   RecoveryLib|Include/Library/RecoveryLib.h
  66
  67   ##  @libraryclass  Provides HII related functions.
  68   HiiLib|Include/Library/HiiLib.h
  69
  70   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  71   CapsuleLib|Include/Library/CapsuleLib.h
  72
  73   ##  @libraryclass  Library for Deferred Procedure Calls.
  74   DpcLib|Include/Library/DpcLib.h
  75
  76   ##  @libraryclass    Provides global variables that are pointers
  77   #   to the UEFI HII related protocols.
  78   #
  79   UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
  80
  81   ##  @libraryclass    Provides a set of interfaces to abstract the policy of security measurement.
  82   #
  83   SecurityManagementLib|Include/Library/SecurityManagementLib.h
  84
  85   ##  @libraryclass  OEM status code libary is used to report status code to OEM device.
  86   #
  87   OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
  88
  89   ##  @libraryclass  Debug Agent is used to provide soft debug capability.
  90   #
  91   DebugAgentLib|Include/Library/DebugAgentLib.h
  92
  93   ##  @libraryclass  Provide platform specific hooks.
  94   #
  95   PlatformHookLib|Include/Library/PlatformHookLib.h
  96
  97   ##  @libraryclass  Provide platform specific hooks for SMM core.
  98   #
  99   SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
 100
 101   ##  @libraryclass  Provide capability to maintain the data integrity cross S3 phase.
 102   #
 103   LockBoxLib|Include/Library/LockBoxLib.h
 104
 105   ##  @libraryclass  Provide the CPU exception handler.
 106   #
 107   CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
 108
 109   ##  @libraryclass    Provides platform specific display interface.
 110   #
 111   CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
 112
 113   ## @libraryclass   Provides sorting functions
 114   SortLib|Include/Library/SortLib.h
 115
 116   ## @libraryclass   Provides core boot manager functions
 117   UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
 118
 119   ## @libraryclass   Provides core boot manager functions
 120   PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
 121
 122   ## @libraryclass  Provides common interfaces about TPM measurement for other modules.
 123   #
 124   TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
 125
 126   ## @libraryclass  Provides authenticated variable services.
 127   #
 128   AuthVariableLib|Include/Library/AuthVariableLib.h
 129
 130   ## @libraryclass  Provides variable check services and database management.
 131   #
 132   VarCheckLib|Include/Library/VarCheckLib.h
 133
 134   ## @libraryclass  Provides services to get variable error flag and do platform variable cleanup.
 135   #
 136   PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
 137
 138   ## @libraryclass  Provides services to get do the file explorer.
 139   #
 140   FileExplorerLib|Include/Library/FileExplorerLib.h
 141
 142   ## @libraryclass  Provides interfaces about logo display.
 143   #
 144   BootLogoLib|Include/Library/BootLogoLib.h
 145
 146   ## @libraryclass  Provides interfaces about Ipmi submit generic commond.
 147   #
 148   IpmiLib|Include/Library/IpmiLib.h
 149
 150   ## @libraryclass  Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
 151   #
 152   PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
 153
 154   ## @libraryclass  Provides services to record memory profile of multilevel caller.
 155   #
 156   MemoryProfileLib|Include/Library/MemoryProfileLib.h
 157
 158   ##  @libraryclass  Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.
 159   ##
 160   FrameBufferBltLib|Include/Library/FrameBufferBltLib.h
 161
 162   ## @libraryclass  Provides services to authenticate a UEFI defined FMP Capsule.
 163   #
 164   FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h
 165
 166   ## @libraryclass   Provides a service to register non-discoverable device
 167   ##
 168   NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h
 169
 170 [Guids]
 171   ## MdeModule package token space guid
 172   # Include/Guid/MdeModulePkgTokenSpace.h
 173   gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
 174
 175   ## Hob guid for Pcd DataBase
 176   #  Include/Guid/PcdDataBaseHobGuid.h
 177   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
 178
 179   ## Guid for PCD DataBase signature.
 180   # Include/Guid/PcdDataBaseSignatureGuid.h
 181   gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
 182
 183   ## Guid for EDKII implementation GUIDed opcodes
 184   #  Include/Guid/MdeModuleHii.h
 185   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
 186
 187   ## Guid for EDKII implementation extension, used to indaicate there are bit fields in the varstore.
 188   #  Include/Guid/MdeModuleHii.h
 189   gEdkiiIfrBitVarstoreGuid  = {0x82DDD68B, 0x9163, 0x4187, {0x9B, 0x27, 0x20, 0xA8, 0xFD, 0x60,0xA7, 0x1D}}
 190
 191   ## Guid for Framework vfr GUIDed opcodes.
 192   #  Include/Guid/MdeModuleHii.h
 193   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
 194
 195   ## Guid to specify the System Non Volatile FV
 196   #  Include/Guid/SystemNvDataGuid.h
 197   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
 198
 199   ## GUID used as the signature of FTW working block header.
 200   #  Include/Guid/SystemNvDataGuid.h
 201   gEdkiiWorkingBlockSignatureGuid   = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65,  0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
 202
 203   ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
 204   #  Include/Guid/FaultTolerantWrite.h
 205   gEdkiiFaultTolerantWriteGuid      = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83,  0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
 206
 207   ## Guid specify the device is the console out device.
 208   #  Include/Guid/ConsoleOutDevice.h
 209   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 210
 211   ## Guid specify the device is the console in device.
 212   #  Include/Guid/ConsoleInDevice.h
 213   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 214
 215   ## Hob and Variable guid specify the platform memory type information.
 216   #  Include/Guid/MemoryTypeInformation.h
 217   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
 218
 219   ## Capsule update hob and variable guid
 220   #  Include/Guid/CapsuleVendor.h
 221   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
 222
 223   ## Guid specifiy the device is the StdErr device.
 224   #  Include/Guid/StandardErrorDevice.h
 225   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 226
 227   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
 228   #  Include/Guid/VariableFormat.h
 229   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
 230
 231   ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
 232   #  Include/Guid/AuthenticatedVariableFormat.h
 233   gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
 234
 235   #  Include/Guid/VariableIndexTable.h
 236   gEfiVariableIndexTableGuid  = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
 237
 238   ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
 239   #  Include/Guid/SmmVariableCommon.h
 240   gSmmVariableWriteGuid  = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
 241
 242   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
 243   #  Include/Guid/Performance.h
 244   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
 245   gSmmPerformanceProtocolGuid    = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa,  0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
 246   gPerformanceExProtocolGuid     = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1,  0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
 247   gSmmPerformanceExProtocolGuid  = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6,  0x30, 0xe3, 0xe,  0xe5 } }
 248
 249   ## Guid is defined for CRC32 encapsulation scheme.
 250   #  Include/Guid/Crc32GuidedSectionExtraction.h
 251   gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
 252
 253   ## Include/Guid/StatusCodeCallbackGuid.h
 254   gStatusCodeCallbackGuid   = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
 255
 256   ## GUID identifies status code records HOB that originate from the PEI status code
 257   #  Include/Guid/MemoryStatusCodeRecord.h
 258   gMemoryStatusCodeRecordGuid     = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
 259
 260   ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
 261   #  Include/Guid/StatusCodeDataTypeDebug.h
 262   gEfiStatusCodeDataTypeDebugGuid  = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
 263
 264   ##  A configuration Table Guid for Load module at fixed address
 265   #  Include/Guid/LoadModuleAtFixedAddress.h
 266   gLoadFixedAddressConfigurationTableGuid  = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
 267
 268   ## GUID used to store the global debug mask value into an EFI Variable
 269   # Include/Guid/DebugMask.h
 270   gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
 271
 272   ##  Event for the DXE Core to signal idle events
 273   #  Include/Guid/EventIdle.h
 274   gIdleLoopEventGuid  = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
 275
 276   ## Include/Guid/RecoveryDevice.h
 277   gRecoveryOnFatUsbDiskGuid          = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
 278
 279   ## Include/Guid/RecoveryDevice.h
 280   gRecoveryOnFatIdeDiskGuid          = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
 281
 282   ## Include/Guid/RecoveryDevice.h
 283   gRecoveryOnFatFloppyDiskGuid       = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
 284
 285   ## Include/Guid/RecoveryDevice.h
 286   gRecoveryOnDataCdGuid              = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
 287
 288   ## Include/Guid/SmmLockBox.h
 289   gEfiSmmLockBoxCommunicationGuid    = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
 290
 291   ## Include/Guid/AcpiS3Context.h
 292   gEfiAcpiVariableGuid               = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
 293
 294   ## Include/Guid/AcpiS3Context.h
 295   gEfiAcpiS3ContextGuid              = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
 296
 297   ## Include/Guid/BootScriptExecutorVariable.h
 298   gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
 299   gEfiBootScriptExecutorContextGuid  = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
 300
 301   ## Include/Guid/UsbKeyBoardLayout.h
 302   gUsbKeyboardLayoutPackageGuid      = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
 303   gUsbKeyboardLayoutKeyGuid          = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
 304
 305   ## Include/Guid/HiiResourceSampleHii.h
 306   gHiiResourceSamleFormSetGuid       = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
 307
 308   ## Include/Guid/DriverSampleHii.h
 309   gDriverSampleFormSetGuid           = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
 310   gDriverSampleInventoryGuid         = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
 311   gEfiIfrRefreshIdOpGuid             = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
 312
 313   ## Include/Guid/PlatDriOverrideHii.h
 314   gPlatformOverridesManagerGuid      = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
 315
 316   ## Include/Guid/Ip4Config2Hii.h
 317   gIp4Config2NvDataGuid              = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
 318
 319   ## Include/Guid/VlanConfigHii.h
 320   gVlanConfigFormSetGuid             = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
 321
 322   ## Include/Guid/Ip4IScsiConfigHii.h
 323   gIp4IScsiConfigGuid                = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
 324   gIScsiCHAPAuthInfoGuid             = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
 325
 326   ## Include/Guid/ZeroGuid.h
 327   gZeroGuid                          = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
 328
 329   ## Include/Guid/MtcVendor.h
 330   gMtcVendorGuid                     = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
 331
 332   ## Guid for Firmware Performance Data Table (FPDT) implementation.
 333   #  Include/Guid/FirmwarePerformance.h
 334   gEfiFirmwarePerformanceGuid        = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
 335   gFirmwarePerformanceS3PointerGuid  = { 0xdc65adc,  0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
 336
 337   ## Include/Guid/ExitBootServiceFailed.h
 338   gEventExitBootServicesFailedGuid   = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
 339
 340   ## Include/Guid/ConnectConInEvent.h
 341   gConnectConInEventGuid             = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
 342
 343   ## Include/Guid/StatusCodeDataTypeVariable.h
 344   gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
 345
 346   ## Include/Guid/MemoryProfile.h
 347   gEdkiiMemoryProfileGuid              = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
 348   gEdkiiSmmMemoryProfileGuid           = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}
 349
 350   ## Include/Protocol/VarErrorFlag.h
 351   gEdkiiVarErrorFlagGuid               = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
 352
 353   ## GUID indicates the BROTLI custom compress/decompress algorithm.
 354   gBrotliCustomDecompressGuid      = { 0x3D532050, 0x5CDA, 0x4FD0, { 0x87, 0x9E, 0x0F, 0x7F, 0x63, 0x0D, 0x5A, 0xFB }}
 355
 356   ## GUID indicates the LZMA custom compress/decompress algorithm.
 357   #  Include/Guid/LzmaDecompress.h
 358   gLzmaCustomDecompressGuid      = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
 359   gLzmaF86CustomDecompressGuid     = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
 360
 361   ## Include/Guid/TtyTerm.h
 362   gEfiTtyTermGuid                = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
 363
 364   ## Include/Guid/HiiBootMaintenanceFormset.h
 365   gEfiIfrBootMaintenanceGuid      = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
 366
 367   gEfiIfrFrontPageGuid        = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
 368
 369   ## Include/Guid/RamDiskHii.h
 370   gRamDiskFormSetGuid            = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
 371
 372   ## Include/Guid/PiSmmCommunicationRegionTable.h
 373   gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}
 374
 375   ## Include/Guid/PiSmmMemoryAttributesTable.h
 376   gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}
 377
 378   ## Include/Guid/SmiHandlerProfile.h
 379   gSmiHandlerProfileGuid = {0x49174342, 0x7108, 0x409b, {0x8b, 0xbe, 0x65, 0xfd, 0xa8, 0x53, 0x89, 0xf5}}
 380
 381   ## Include/Guid/NonDiscoverableDevice.h
 382   gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }
 383   gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }
 384   gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }
 385   gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }
 386   gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }
 387   gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }
 388   gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }
 389   gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }
 390   gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }
 391
 392   ## Include/Guid/PlatformHasAcpi.h
 393   gEdkiiPlatformHasAcpiGuid = { 0xf0966b41, 0xc23f, 0x41b9, { 0x96, 0x04, 0x0f, 0xf7, 0xe1, 0x11, 0x96, 0x5a } }
 394
 395   ## Include/Guid/EndofS3Resume.h
 396   gEdkiiEndOfS3ResumeGuid = { 0x96f5296d, 0x05f7, 0x4f3c, {0x84, 0x67, 0xe4, 0x56, 0x89, 0x0e, 0x0c, 0xb5 } }
 397
 398 [Ppis]
 399   ## Include/Ppi/AtaController.h
 400   gPeiAtaControllerPpiGuid       = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
 401
 402   ## Include/Ppi/UsbHostController.h
 403   gPeiUsbHostControllerPpiGuid   = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
 404
 405   ## Include/Ppi/Usb2HostController.h
 406   gPeiUsb2HostControllerPpiGuid  = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22   }}
 407
 408   ## Include/Ppi/UsbController.h
 409   gPeiUsbControllerPpiGuid       = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
 410
 411   ## Include/Ppi/UsbIo.h
 412   gPeiUsbIoPpiGuid               = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
 413
 414   ## Include/Ppi/SecPerformance.h
 415   gPeiSecPerformancePpiGuid      = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
 416
 417   ## Include/Ppi/SmmCommunication.h
 418   gEfiPeiSmmCommunicationPpiGuid   =  { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
 419
 420   ## Include/Ppi/SmmAccess.h
 421   gPeiSmmAccessPpiGuid          =  { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
 422
 423   ## Include/Ppi/SmmControl.h
 424   gPeiSmmControlPpiGuid         =  { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
 425
 426   ## Include/Ppi/PostBootScriptTable.h
 427   gPeiPostScriptTablePpiGuid    =  { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
 428
 429   ## Include/Ppi/SerialPortPei.h
 430   gPeiSerialPortPpiGuid         =  { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
 431
 432   ## Include/Ppi/UfsHostController.h
 433   gEdkiiPeiUfsHostControllerPpiGuid  =  { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
 434
 435   ## Include/Ppi/IpmiPpi.h
 436   gPeiIpmiPpiGuid               =  { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
 437
 438   ## Include/Ppi/SdMmcHostController.h
 439   gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
 440
 441   ## Include/Ppi/IoMmu.h
 442   gEdkiiIoMmuPpiGuid = { 0x70b0af26, 0xf847, 0x4bb6, { 0xaa, 0xb9, 0xcd, 0xe8, 0x4f, 0xc6, 0x14, 0x31 } }
 443
 444 [Protocols]
 445   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
 446   #  Include/Protocol/LoadPe32Image.h
 447   #  This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
 448   #  If developer need implement such functionality, they should use BasePeCoffLib.
 449   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
 450
 451   ## Print protocols define basic print functions to print the format unicode and ascii string.
 452   # Include/Protocol/Print2.h
 453   gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
 454   gEfiPrint2SProtocolGuid         = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }
 455
 456   ## This protocol defines the generic memory test interfaces in Dxe phase.
 457   # Include/Protocol/GenericMemoryTest.h
 458   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
 459
 460   ## This protocol defines the Debugger Configuration interface.
 461   # Include/Protocol/DebuggerConfiguration.h
 462   gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}
 463
 464   ## Include/Protocol/Dpc.h
 465   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
 466
 467   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
 468   #  Include/Protocol/FaultTolerantWrite.h
 469   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 470
 471   ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
 472   #  Include/Protocol/SmmFaultTolerantWrite.h
 473   gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
 474
 475   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
 476   #  Include/Protocol/SwapAddressRange.h
 477   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
 478
 479   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
 480   #  Include/Protocol/SmmSwapAddressRange.h
 481   gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
 482
 483   ## This protocol is intended for use as a means to store data in the EFI SMM environment.
 484   #  Include/Protocol/SmmVariableProtocol.h
 485   gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
 486
 487   ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
 488   #  Include/Protocol/VariableLock.h
 489   gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
 490
 491   ## Include/Protocol/VarCheck.h
 492   gEdkiiVarCheckProtocolGuid     = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
 493
 494   ## Include/Protocol/SmmVarCheck.h
 495   gEdkiiSmmVarCheckProtocolGuid  = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
 496
 497   ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
 498   #  Include/Protocol/SmmFirmwareVolumeBlock.h
 499   gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
 500
 501   ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
 502   # Include/Guid/DebugMask.h
 503   gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
 504
 505   ## Include/Protocol/LockBox.h
 506   gEfiLockBoxProtocolGuid        = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
 507
 508   ## Include/Protocol/FormBrowserEx.h
 509   gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
 510   gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
 511
 512   ## Include/Protocol/EbcVmTest.h
 513   gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
 514
 515   ## Include/Protocol/EbcSimpleDebugger.h
 516   gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
 517
 518   ## Include/Protocol/BootLogo.h
 519   gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
 520
 521   ## Include/Protocol/DisplayProtocol.h
 522   gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
 523
 524   ## Include/Protocol/FormBrowserEx2.h
 525   gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
 526
 527   ## Include/Protocol/UfsHostController.h
 528   gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
 529
 530   ## Include/Protocol/EsrtManagement.h
 531   gEsrtManagementProtocolGuid         = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
 532
 533   ## Include/Protocol/SmmExitBootServices.h
 534   gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
 535
 536   ## Include/Protocol/SmmLegacyBoot.h
 537   gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
 538
 539   ## Include/Protocol/SmmReadyToBoot.h
 540   gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
 541
 542   ## Include/Protocol/PlatformLogo.h
 543   gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }
 544
 545   ## Include/Protocol/FileExplorer.h
 546   gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
 547
 548   ## Include/Protocol/IpmiProtocol.h
 549   gIpmiProtocolGuid    = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
 550   gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
 551
 552   ## PS/2 policy protocol abstracts the specific platform initialization and setting.
 553   #  Include/Protocol/Ps2Policy.h
 554   gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }
 555
 556   ## Include/Protocol/NonDiscoverableDevice.h
 557   gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }
 558
 559   ## Include/Protocol/IoMmu.h
 560   gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }
 561
 562   ## Include/Protocol/SmmMemoryAttribute.h
 563   gEdkiiSmmMemoryAttributeProtocolGuid = { 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } }
 564
 565 #
 566 # [Error.gEfiMdeModulePkgTokenSpaceGuid]
 567 #   0x80000001 | Invalid value provided.
 568 #   0x80000002 | Reserved bits must be set to zero.
 569 #   0x80000003 | Incorrect progress code provided.
 570 #   0x80000004 | Invalid foreground color specified.
 571 #   0x80000005 | Invalid background color specified.
 572 #   0x80000006 | Incorrect error code provided.
 573 #
 574
 575 [PcdsFeatureFlag]
 576   ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
 577   #   TRUE  - Supports update capsule across a system reset.<BR>
 578   #   FALSE - Does not support update capsule across a system reset.<BR>
 579   # @Prompt Enable update capsule across a system reset.
 580   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
 581
 582   ## Indicates if all PCD PPI services will be enabled.<BR><BR>
 583   #   TRUE  - All PCD PPI services will be produced.<BR>
 584   #   FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
 585   # @Prompt Enable full PEI PCD services.
 586   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
 587
 588   ## Indicates if the Device Path To Text Protocol should be produced by the platform.
 589   #  It can be disabled to save size.<BR><BR>
 590   #   TRUE  - Device Path To Text Protocol will be produced.<BR>
 591   #   FALSE - Device Path To Text Protocol will not be produced.<BR>
 592   # @Prompt Enable Device Path to Text support.
 593   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
 594
 595   ## Indicates if the Device Path From Text Protocol should be produced by the platform.
 596   #  It can be disabled to save size.<BR><BR>
 597   #   TRUE  - Device Path From Text Protocol will be produced.<BR>
 598   #   FALSE - Device Path From Text Protocol will not be produced.<BR>
 599   # @Prompt Enable Device Path From Text support.
 600   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
 601
 602   ## Indicates if the statistics about variable usage will be collected. This information is
 603   #  stored as a vendor configuration table into the EFI system table.
 604   #  Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
 605   #  variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
 606   #   TRUE  - Statistics about variable usage will be collected.<BR>
 607   #   FALSE - Statistics about variable usage will not be collected.<BR>
 608   # @Prompt Enable variable statistics collection.
 609   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
 610
 611   ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
 612   #   TRUE  - Installs Unicode Collation Protocol.<BR>
 613   #   FALSE - Does not install Unicode Collation Protocol.<BR>
 614   # @Prompt Enable Unicode Collation support.
 615   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
 616
 617   ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
 618   #   TRUE  - Installs Unicode Collation 2 Protocol.<BR>
 619   #   FALSE - Does not install Unicode Collation 2 Protocol.<BR>
 620   # @Prompt Enable Unicode Collation 2 support.
 621   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
 622
 623   ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
 624   #  It could be set FALSE to save size.<BR><BR>
 625   #   TRUE  - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
 626   #   FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
 627   # @Prompt Enable ConOut GOP support.
 628   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
 629
 630   ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
 631   #  It could be set FALSE to save size.<BR><BR>
 632   #   TRUE  - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
 633   #   FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
 634   # @Prompt Enable ConOut UGA support.
 635   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
 636
 637   ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
 638   #  This PCD is used to tune PEI phase performance to reduce the search image time.
 639   #  It can be set according to the generated image section type.<BR><BR>
 640   #   TRUE  - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
 641   #   FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
 642   # @Prompt PeiCore search TE section first.
 643   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
 644
 645   ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
 646   #  interrupt to access usb device in the case of absence of usb stack.
 647   #  DUET platform requires the token to be TRUE.<BR><BR>
 648   #   TRUE  - Turn off usb legacy support.<BR>
 649   #   FALSE - Does not turn off usb legacy support.<BR>
 650   # @Prompt Turn off USB legacy support.
 651   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
 652
 653   ## Indicates if HiiImageProtocol will be installed.
 654   #  FALSE is for size reduction.<BR><BR>
 655   #   TRUE  - Installs HiiImageProtocol.<BR>
 656   #   FALSE - Does not install HiiImageProtocol.<BR>
 657   # @Prompt Enable HII image support.
 658   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
 659
 660   ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
 661   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
 662   #  from HII database.<BR><BR>
 663   #   TRUE  - USB KeyBoard Driver will disable the default keyboard layout.<BR>
 664   #   FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
 665   # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
 666   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
 667
 668   ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
 669   #   TRUE  - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
 670   #           the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
 671   #   FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
 672   #           the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
 673   # @Prompt Enable framework backward compatibility support.
 674   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
 675
 676   ## Indicates if HelloWorld Application will print the verbose information.
 677   #  This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
 678   #   TRUE  - HelloWorld Application will print the verbose information.<BR>
 679   #   FALSE - HelloWorld Application will not print the verbose information.<BR>
 680   # @Prompt Enable HelloWorld print.
 681   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
 682
 683   ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
 684   #   TRUE  - Produces FULL FTW protocol services (total six APIs).<BR>
 685   #   FALSE - Only FTW Write service is available.<BR>
 686   # @Prompt Enable FULL FTW services.
 687   gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
 688
 689   ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
 690   #   TRUE  - DXE IPL will support UEFI decompression.<BR>
 691   #   FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
 692   # @Prompt Enable UEFI decompression support in DXE IPL.
 693   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
 694
 695   ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
 696   #   TRUE  - PciBus driver supports the hot plug device.<BR>
 697   #   FALSE - PciBus driver doesn't support the hot plug device.<BR>
 698   # @Prompt Enable PciBus hot plug device support.
 699   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
 700
 701   ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
 702   #   TRUE  - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
 703   #   FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
 704   # @Prompt Enable PCI bridge IO alignment probe.
 705   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
 706
 707   ## Indicates if StatusCode is reported via Serial port.<BR><BR>
 708   #   TRUE  - Reports StatusCode via Serial port.<BR>
 709   #   FALSE - Does not report StatusCode via Serial port.<BR>
 710   # @Prompt Enable StatusCode via Serial port.
 711   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
 712
 713   ## Indicates if StatusCode is stored in memory.
 714   #  The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
 715   #   TRUE  - Stores StatusCode in memory.<BR>
 716   #   FALSE - Does not store StatusCode in memory.<BR>
 717   # @Prompt Enable StatusCode via memory.
 718   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
 719
 720   ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
 721   #   TRUE  - Replays PEI phase StatusCode in DXE phased.<BR>
 722   #   FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
 723   # @Prompt Enable PEI StatusCode replay in DXE phase
 724   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
 725
 726   ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
 727   #   TRUE  - Installs ACPI SDT protocol.<BR>
 728   #   FALSE - Does not install ACPI SDT protocol.<BR>
 729   # @Prompt Enable ACPI SDT support.
 730   gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
 731
 732   ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
 733   #  The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
 734   #   TRUE  - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
 735   #   FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
 736   # @Prompt Enable unaligned PCI I/O support.
 737   gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
 738
 739   ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
 740   #   TRUE  - TEXT statement will always be set to GrayOut.<BR>
 741   #   FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
 742   # @Prompt Always GrayOut TEXT statement.
 743   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
 744
 745   ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
 746   #   TRUE  - The unselectable menu will be set to GrayOut.<BR>
 747   #   FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
 748   # @Prompt GrayOut read only menu.
 749   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
 750
 751   ## Indicates if recovery from IDE disk will be supported.<BR><BR>
 752   #   TRUE  - Supports recovery from IDE disk.<BR>
 753   #   FALSE - Does not support recovery from IDE disk.<BR>
 754   # @Prompt Enable recovery on IDE disk.
 755   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
 756
 757   ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
 758   #   TRUE  - Supports recovery from FAT floppy disk.<BR>
 759   #   FALSE - Does not support recovery from FAT floppy disk.<BR>
 760   # @Prompt Enable recovery on FAT floppy disk.
 761   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
 762
 763   ## Indicates if recovery from data CD will be supported.<BR><BR>
 764   #   TRUE  - Supports recovery from data CD.<BR>
 765   #   FALSE - Does not support recovery from data CD.<BR>
 766   # @Prompt Enable recovery on data CD.
 767   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
 768
 769   ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
 770   #   TRUE  - Supports recovery from USB disk.<BR>
 771   #   FALSE - Does not support recovery from USB disk.<BR>
 772   # @Prompt Enable recovery on FAT USB disk.
 773   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
 774
 775   ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
 776   #   TRUE  - S3 performance data will be supported in ACPI FPDT table.<BR>
 777   #   FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
 778   # @Prompt Enable S3 performance data support.
 779   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
 780
 781   ## Indicates if PS2 keyboard does a extended verification during start.
 782   #  Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
 783   #  Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
 784   #   TRUE  - Turn on PS2 keyboard extended verification.<BR>
 785   #   FALSE - Turn off PS2 keyboard extended verification.<BR>
 786   # @Prompt Turn on PS2 Keyboard Extended Verification
 787   gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072
 788
 789   ## Indicates if Serial device uses half hand shake.<BR><BR>
 790   #   TRUE  - Serial device uses half hand shake.<BR>
 791   #   FALSE - Serial device doesn't use half hand shake.<BR>
 792   # @Prompt Enable Serial device Half Hand Shake
 793   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
 794
 795   ## Indicates if HII data and configuration has been exported.<BR><BR>
 796   #  Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
 797   #  simulator platform because the performance cost for this feature.
 798   #   TRUE  - Export HII data and configuration data.<BR>
 799   #   FALSE - Does not export HII data and configuration.<BR>
 800   # @Prompt Enable export HII data and configuration to be used in OS runtime.
 801   gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
 802
 803   ## Indicates if PS2 mouse does a extended verification during start.
 804   #  Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
 805   #   TRUE  - Turn on PS2 mouse extended verification. <BR>
 806   #   FALSE - Turn off PS2 mouse extended verification. <BR>
 807   # @Prompt Turn on PS2 Mouse Extended Verification
 808   gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075
 809
 810   ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM
 811   #  On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),
 812   #  which requires that all PCI MMIO BARs are located below 4 GB
 813   #   TRUE  - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM
 814   #   FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM
 815   # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs
 816   gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a
 817
 818 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]
 819   gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a
 820
 821 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
 822   ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
 823   #  It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
 824   #  is built in firmware.<BR><BR>
 825   #   TRUE  - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
 826   #   FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
 827   # @Prompt DxeIpl switch to long mode.
 828   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
 829
 830   ## Indicates if DxeIpl should rebuild page tables. This flag only
 831   #  makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
 832   #   TRUE  - DxeIpl will rebuild page tables.<BR>
 833   #   FALSE - DxeIpl will not rebuild page tables.<BR>
 834   # @Prompt DxeIpl rebuild page tables.
 835   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
 836
 837 [PcdsFixedAtBuild]
 838   ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
 839   #  0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
 840   #  0:                  Disable the feature.<BR>
 841   #  Other Value:        Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
 842   # @Prompt Enable LMFA feature.
 843   # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
 844   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
 845
 846   ## Progress Code for OS Loader LoadImage start.<BR><BR>
 847   #  PROGRESS_CODE_OS_LOADER_LOAD   = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
 848   # @Prompt Progress Code for OS Loader LoadImage start.
 849   # @ValidList  0x80000003 | 0x03058000
 850   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
 851
 852   ## Progress Code for OS Loader StartImage start.<BR><BR>
 853   #  PROGRESS_CODE_OS_LOADER_START  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
 854   # @Prompt Progress Code for OS Loader StartImage start.
 855   # @ValidList  0x80000003 | 0x03058001
 856   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
 857
 858   ## Progress Code for S3 Suspend start.<BR><BR>
 859   #  PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000))    = 0x03078000<BR>
 860   # @Prompt Progress Code for S3 Suspend start.
 861   # @ValidList  0x80000003 | 0x03078000
 862   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
 863
 864   ## Progress Code for S3 Suspend end.<BR><BR>
 865   #  PROGRESS_CODE_S3_SUSPEND_END   = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001))    = 0x03078001<BR>
 866   # @Prompt Progress Code for S3 Suspend end.
 867   # @ValidList  0x80000003 | 0x03078001
 868   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
 869
 870   ## Error Code for SetVariable failure.<BR><BR>
 871   #  EDKII_ERROR_CODE_SET_VARIABLE  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
 872   # @Prompt Error Code for SetVariable failure.
 873   # @ValidList  0x80000006 | 0x03058002
 874   gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
 875
 876   ## Mask to control the NULL address detection in code for different phases.
 877   #  If enabled, accessing NULL address in UEFI or SMM code can be caught.<BR><BR>
 878   #    BIT0    - Enable NULL pointer detection for UEFI.<BR>
 879   #    BIT1    - Enable NULL pointer detection for SMM.<BR>
 880   #    BIT2..6 - Reserved for future uses.<BR>
 881   #    BIT7    - Disable NULL pointer detection just after EndOfDxe. <BR>
 882   #              This is a workaround for those unsolvable NULL access issues in
 883   #              OptionROM, boot loader, etc. It can also help to avoid unnecessary
 884   #              exception caused by legacy memory (0-4095) access after EndOfDxe,
 885   #              such as Windows 7 boot on Qemu.<BR>
 886   # @Prompt Enable NULL address detection.
 887   gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask|0x0|UINT8|0x30001050
 888
 889   ## Init Value in Temp Stack to be shared between SEC and PEI_CORE
 890   # SEC fills the full temp stack with this values. When switch stack, PeiCore can check
 891   # this value in the temp stack to know how many stack has been used.
 892   # @Prompt Init Value in Temp Stack
 893   gEfiMdeModulePkgTokenSpaceGuid.PcdInitValueInTempStack|0x5AA55AA5|UINT32|0x30001051
 894
 895   ## Indicates which type allocation need guard page.
 896   #
 897   # If a bit is set, a head guard page and a tail guard page will be added just
 898   # before and after corresponding type of pages allocated if there's enough
 899   # free pages for all of them. The page allocation for the type related to
 900   # cleared bits keeps the same as ususal.
 901   #
 902   # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
 903   #  EfiReservedMemoryType             0x0000000000000001<BR>
 904   #  EfiLoaderCode                     0x0000000000000002<BR>
 905   #  EfiLoaderData                     0x0000000000000004<BR>
 906   #  EfiBootServicesCode               0x0000000000000008<BR>
 907   #  EfiBootServicesData               0x0000000000000010<BR>
 908   #  EfiRuntimeServicesCode            0x0000000000000020<BR>
 909   #  EfiRuntimeServicesData            0x0000000000000040<BR>
 910   #  EfiConventionalMemory             0x0000000000000080<BR>
 911   #  EfiUnusableMemory                 0x0000000000000100<BR>
 912   #  EfiACPIReclaimMemory              0x0000000000000200<BR>
 913   #  EfiACPIMemoryNVS                  0x0000000000000400<BR>
 914   #  EfiMemoryMappedIO                 0x0000000000000800<BR>
 915   #  EfiMemoryMappedIOPortSpace        0x0000000000001000<BR>
 916   #  EfiPalCode                        0x0000000000002000<BR>
 917   #  EfiPersistentMemory               0x0000000000004000<BR>
 918   #  OEM Reserved                      0x4000000000000000<BR>
 919   #  OS Reserved                       0x8000000000000000<BR>
 920   # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.<BR>
 921   # @Prompt The memory type mask for Page Guard.
 922   gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType|0x0|UINT64|0x30001052
 923
 924   ## Indicates which type allocation need guard page.
 925   #
 926   # If a bit is set, a head guard page and a tail guard page will be added just
 927   # before and after corresponding type of pages which the allocated pool occupies,
 928   # if there's enough free memory for all of them. The pool allocation for the
 929   # type related to cleared bits keeps the same as ususal.
 930   #
 931   # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
 932   #  EfiReservedMemoryType             0x0000000000000001<BR>
 933   #  EfiLoaderCode                     0x0000000000000002<BR>
 934   #  EfiLoaderData                     0x0000000000000004<BR>
 935   #  EfiBootServicesCode               0x0000000000000008<BR>
 936   #  EfiBootServicesData               0x0000000000000010<BR>
 937   #  EfiRuntimeServicesCode            0x0000000000000020<BR>
 938   #  EfiRuntimeServicesData            0x0000000000000040<BR>
 939   #  EfiConventionalMemory             0x0000000000000080<BR>
 940   #  EfiUnusableMemory                 0x0000000000000100<BR>
 941   #  EfiACPIReclaimMemory              0x0000000000000200<BR>
 942   #  EfiACPIMemoryNVS                  0x0000000000000400<BR>
 943   #  EfiMemoryMappedIO                 0x0000000000000800<BR>
 944   #  EfiMemoryMappedIOPortSpace        0x0000000000001000<BR>
 945   #  EfiPalCode                        0x0000000000002000<BR>
 946   #  EfiPersistentMemory               0x0000000000004000<BR>
 947   #  OEM Reserved                      0x4000000000000000<BR>
 948   #  OS Reserved                       0x8000000000000000<BR>
 949   # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.<BR>
 950   # @Prompt The memory type mask for Pool Guard.
 951   gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053
 952
 953   ## This mask is to control Heap Guard behavior.
 954   # Note that due to the limit of pool memory implementation and the alignment
 955   # requirement of UEFI spec, BIT7 is a try-best setting which cannot guarantee
 956   # that the returned pool is exactly adjacent to head guard page or tail guard
 957   # page.
 958   #   BIT0 - Enable UEFI page guard.<BR>
 959   #   BIT1 - Enable UEFI pool guard.<BR>
 960   #   BIT2 - Enable SMM page guard.<BR>
 961   #   BIT3 - Enable SMM pool guard.<BR>
 962   #   BIT7 - The direction of Guard Page for Pool Guard.
 963   #          0 - The returned pool is near the tail guard page.<BR>
 964   #          1 - The returned pool is near the head guard page.<BR>
 965   # @Prompt The Heap Guard feature mask
 966   gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask|0x0|UINT8|0x30001054
 967
 968   ## Indicates if UEFI Stack Guard will be enabled.
 969   #  If enabled, stack overflow in UEFI can be caught, preventing chaotic consequences.<BR><BR>
 970   #   TRUE  - UEFI Stack Guard will be enabled.<BR>
 971   #   FALSE - UEFI Stack Guard will be disabled.<BR>
 972   # @Prompt Enable UEFI Stack Guard.
 973   gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard|FALSE|BOOLEAN|0x30001055
 974
 975 [PcdsFixedAtBuild, PcdsPatchableInModule]
 976   ## Dynamic type PCD can be registered callback function for Pcd setting action.
 977   #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
 978   #  for a dynamic PCD used in PEI phase.
 979   # @Prompt Max PEI PCD callback number per PCD entry.
 980   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
 981
 982   ## VPD type PCD  allows a developer to point to an absolute physical address PcdVpdBaseAddress
 983   #  to store PCD value.
 984   # @Prompt VPD base address.
 985   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
 986
 987   ## Maximum number of FV is supported by PeiCore's dispatching.
 988   # @Prompt Maximum number of FV supported by PeiCore.
 989   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
 990
 991   ## Maximum File count in every FV is supported by PeiCore's dispatching.
 992   #  PeiCore supported File type includes PEIM, Combined PEIM and FV.
 993   # @Prompt Maximum File count per FV supported by PeiCore.
 994   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
 995
 996   ## Maximum stack size for PeiCore.
 997   # @Prompt Maximum stack size for PeiCore.
 998   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
 999
1000   ## Maximum PPI count is supported by PeiCore's PPI database.
1001   # @Prompt Maximum PPI count supported by PeiCore.
1002   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
1003
1004   ## The maximum size of a single non-HwErr type variable.
1005   # @Prompt Maximum variable size.
1006   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
1007
1008   ## The maximum size of a single authenticated variable.
1009   # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
1010   # @Prompt Maximum authenticated variable size.
1011   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
1012
1013   ## The maximum size of single hardware error record variable.<BR><BR>
1014   # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
1015   # In IA64 platforms, this value should be larger than 128KB.<BR>
1016   # @Prompt Maximum HwErr variable size.
1017   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
1018
1019   ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
1020   # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
1021   # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
1022   # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
1023   # @Prompt HwErr variable storage size.
1024   gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
1025
1026   ## The size of maximum user NV variable space.<BR><BR>
1027   # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
1028   # If the value is 0, it means user variable share the same NV storage with system variable,
1029   # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
1030   # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
1031   # otherwise the variable will be regarded as user variable.<BR>
1032   #  1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
1033   #  2) Variables managed by Variable driver internally.<BR>
1034   #  3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
1035   #  4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
1036   # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
1037   # @Prompt Maximum user NV variable space size.
1038   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
1039
1040   ## The size of NV variable space reserved at UEFI boottime.<BR><BR>
1041   # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
1042   # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
1043   # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
1044   # Then the common NV variable space size at boottime will be
1045   #  (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
1046   # and the common NV variable space size at runtime will be
1047   #  (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
1048   # @Prompt Boottime reserved NV variable space size.
1049   gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
1050
1051   ## Reclaim variable space at EndOfDxe.<BR><BR>
1052   # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
1053   # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
1054   # @Prompt Reclaim variable space at EndOfDxe.
1055   gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
1056
1057   ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
1058   # @Prompt Variable storage size.
1059   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
1060
1061   ## FFS filename to find the ACPI tables.
1062   # @Prompt FFS name of ACPI tables storage.
1063   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
1064
1065   ## FFS filename to find the capsule coalesce image.
1066   # @Prompt FFS name of capsule coalesce image.
1067   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
1068
1069   ## Maximum number of performance log entries during PEI phase.
1070   # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is
1071   # more than 255.
1072   # @Prompt Maximum number of PEI performance log entries.
1073   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
1074
1075   ## Maximum number of performance log entries during PEI phase.
1076   # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of
1077   # entries. If greater than 0, then this PCD determines the number of entries,
1078   # and PcdMaxPeiPerformanceLogEntries is ignored.
1079   # @Prompt Maximum number of PEI performance log entries.
1080   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
1081
1082   ## RTC Update Timeout Value(microsecond).
1083   # @Prompt RTC Update Timeout Value.
1084   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
1085
1086   ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
1087   #   TRUE  - 16550 serial port registers are in MMIO space.<BR>
1088   #   FALSE - 16550 serial port registers are in I/O space.<BR>
1089   # @Prompt Serial port registers use MMIO.
1090   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
1091
1092   ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
1093   #   TRUE  - 16550 serial port hardware flow control will be enabled.<BR>
1094   #   FALSE - 16550 serial port hardware flow control will be disabled.<BR>
1095   # @Prompt Enable serial port hardware flow control.
1096   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
1097
1098   ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
1099   #  This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
1100   #   TRUE  - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
1101   #   FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
1102   # @Prompt Enable serial port cable detetion.
1103   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
1104
1105   ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
1106   # @Prompt Base address of serial port registers.
1107   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
1108
1109   ## Baud rate for the 16550 serial port.  Default is 115200 baud.
1110   # @Prompt Baud rate for serial port.
1111   # @ValidList  0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
1112   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
1113
1114   ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
1115   #    BIT1..BIT0 - Data bits.  00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
1116   #    BIT2       - Stop Bits.  0 = 1 stop bit.  1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
1117   #    BIT5..BIT3 - Parity.  xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
1118   #    BIT7..BIT6 - Reserved.  Must be 0.<BR>
1119   #
1120   #  Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
1121   # @Prompt Serial port Line Control settings.
1122   # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
1123   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
1124
1125   ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
1126   #    BIT0       - FIFO Enable.  0 = Disable FIFOs.  1 = Enable FIFOs.<BR>
1127   #    BIT1       - Clear receive FIFO.  1 = Clear FIFO.<BR>
1128   #    BIT2       - Clear transmit FIFO.  1 = Clear FIFO.<BR>
1129   #    BIT4..BIT3 - Reserved.  Must be 0.<BR>
1130   #    BIT5       - Enable 64-byte FIFO.  0 = Disable 64-byte FIFO.  1 = Enable 64-byte FIFO<BR>
1131   #    BIT7..BIT6 - Reserved.  Must be 0.<BR>
1132   #
1133   #  Default is to enable and clear all FIFOs.<BR>
1134   # @Prompt Serial port FIFO Control settings.
1135   # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
1136   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
1137
1138   ## This setting can override the default TFTP block size. A value of 0 computes
1139   # the default from MTU information. A non-zero value will be used as block size
1140   # in bytes.
1141   # @Prompt TFTP block size.
1142   gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
1143
1144   ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
1145   #  structure. The default value for this PCD is 0, which means that the DXE Core
1146   #  will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
1147   #  boundary as close to the top of memory as feasible.  If this PCD is set to a
1148   #  value other than 0, then the DXE Core will first attempt to allocate the
1149   #  EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
1150   #  by this PCD, and if that allocation fails, retry the allocation on a 4MB
1151   #  boundary as close to the top of memory as feasible.
1152   # @Prompt Maximum Efi System Table Pointer address.
1153   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
1154
1155   ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
1156   #   TRUE  - Shadow PEIM on S3 boot path after memory is ready.<BR>
1157   #   FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
1158   # @Prompt Shadow Peim On S3 Boot.
1159   gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
1160
1161   ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
1162   #  This PCD is used on other boot path except for S3 boot.
1163   #   TRUE  - Shadow PEIM and PeiCore after memory is ready.<BR>
1164   #   FALSE - Not shadow PEIM after memory is ready.<BR>
1165   # @Prompt Shadow Peim and PeiCore on boot
1166   gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
1167
1168   ## The mask is used to control memory profile behavior.<BR><BR>
1169   #  BIT0 - Enable UEFI memory profile.<BR>
1170   #  BIT1 - Enable SMRAM profile.<BR>
1171   #  BIT7 - Disable recording at the start.<BR>
1172   # @Prompt Memory Profile Property.
1173   # @Expression  0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0
1174   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
1175
1176   ## The mask is used to control SmiHandlerProfile behavior.<BR><BR>
1177   #  BIT0 - Enable SmiHandlerProfile.<BR>
1178   # @Prompt SmiHandlerProfile Property.
1179   # @Expression  0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask & 0xFE) == 0
1180   gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask|0|UINT8|0x00000108
1181
1182   ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
1183   # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
1184   #
1185   # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
1186   #  EfiReservedMemoryType          0x0001<BR>
1187   #  EfiLoaderCode                  0x0002<BR>
1188   #  EfiLoaderData                  0x0004<BR>
1189   #  EfiBootServicesCode            0x0008<BR>
1190   #  EfiBootServicesData            0x0010<BR>
1191   #  EfiRuntimeServicesCode         0x0020<BR>
1192   #  EfiRuntimeServicesData         0x0040<BR>
1193   #  EfiConventionalMemory          0x0080<BR>
1194   #  EfiUnusableMemory              0x0100<BR>
1195   #  EfiACPIReclaimMemory           0x0200<BR>
1196   #  EfiACPIMemoryNVS               0x0400<BR>
1197   #  EfiMemoryMappedIO              0x0800<BR>
1198   #  EfiMemoryMappedIOPortSpace     0x1000<BR>
1199   #  EfiPalCode                     0x2000<BR>
1200   #  EfiPersistentMemory            0x4000<BR>
1201   #  OEM Reserved       0x4000000000000000<BR>
1202   #  OS Reserved        0x8000000000000000<BR>
1203   #
1204   # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
1205   #
1206   # @Prompt Memory profile memory type.
1207   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
1208
1209   ## This PCD is to control which drivers need memory profile data.<BR><BR>
1210   # For example:<BR>
1211   # One image only (Shell):<BR>
1212   #     Header                    GUID<BR>
1213   #     {0x04, 0x06, 0x14, 0x00,  0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
1214   #      0x7F, 0xFF, 0x04, 0x00}<BR>
1215   # Two or more images (Shell + WinNtSimpleFileSystem):<BR>
1216   #     {0x04, 0x06, 0x14, 0x00,  0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
1217   #      0x7F, 0x01, 0x04, 0x00,<BR>
1218   #      0x04, 0x06, 0x14, 0x00,  0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>
1219   #      0x7F, 0xFF, 0x04, 0x00}<BR>
1220   # @Prompt Memory profile driver path.
1221   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043
1222
1223   ## Set image protection policy. The policy is bitwise.
1224   #  If a bit is set, the image will be protected by DxeCore if it is aligned.
1225   #   The code section becomes read-only, and the data section becomes non-executable.
1226   #  If a bit is clear, the image will not be protected.<BR><BR>
1227   #    BIT0       - Image from unknown device. <BR>
1228   #    BIT1       - Image from firmware volume.<BR>
1229   # @Prompt Set image protection policy.
1230   # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F
1231   gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047
1232
1233   ## Set DXE memory protection policy. The policy is bitwise.
1234   #  If a bit is set, memory regions of the associated type will be mapped
1235   #  non-executable.<BR><BR>
1236   #
1237   # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
1238   #  EfiReservedMemoryType          0x0001<BR>
1239   #  EfiLoaderCode                  0x0002<BR>
1240   #  EfiLoaderData                  0x0004<BR>
1241   #  EfiBootServicesCode            0x0008<BR>
1242   #  EfiBootServicesData            0x0010<BR>
1243   #  EfiRuntimeServicesCode         0x0020<BR>
1244   #  EfiRuntimeServicesData         0x0040<BR>
1245   #  EfiConventionalMemory          0x0080<BR>
1246   #  EfiUnusableMemory              0x0100<BR>
1247   #  EfiACPIReclaimMemory           0x0200<BR>
1248   #  EfiACPIMemoryNVS               0x0400<BR>
1249   #  EfiMemoryMappedIO              0x0800<BR>
1250   #  EfiMemoryMappedIOPortSpace     0x1000<BR>
1251   #  EfiPalCode                     0x2000<BR>
1252   #  EfiPersistentMemory            0x4000<BR>
1253   #  OEM Reserved       0x4000000000000000<BR>
1254   #  OS Reserved        0x8000000000000000<BR>
1255   #
1256   # NOTE: User must NOT set NX protection for EfiLoaderCode / EfiBootServicesCode / EfiRuntimeServicesCode. <BR>
1257   #       User MUST set the same NX protection for EfiBootServicesData and EfiConventionalMemory. <BR>
1258   #
1259   # e.g. 0x7FD5 can be used for all memory except Code. <BR>
1260   # e.g. 0x7BD4 can be used for all memory except Code and ACPINVS/Reserved. <BR>
1261   #
1262   # @Prompt Set DXE memory protection policy.
1263   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048
1264
1265   ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
1266   #  information that describes the path that contains zero or more PCI to PCI briges
1267   #  followed by a PCI serial device.  Each array entry is 4-bytes in length.  The
1268   #  first byte is the PCI Device Number, then second byte is the PCI Function Number,
1269   #  and the last two bytes are the offset to the PCI power management capabilities
1270   #  register used to manage the D0-D3 states.  If a PCI power management capabilities
1271   #  register is not present, then the last two bytes in the offset is set to 0.  The
1272   #  array is terminated by an array entry with a PCI Device Number of 0xFF.  For a
1273   #  non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
1274   # @Prompt Pci Serial Device Info
1275   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
1276
1277   ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
1278   #  BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
1279   #  describes the parameters of special PCI serial devices.
1280   #  Each array entry is 24-byte in length. The array is terminated
1281   #  by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
1282   #  standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
1283   #  The C style structure is defined as below:<BR>
1284   #  typedef struct {<BR>
1285   #    UINT16  VendorId;          ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>
1286   #    UINT16  DeviceId;          ///< Device ID to match the PCI device.<BR>
1287   #    UINT32  ClockRate;         ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>
1288   #    UINT64  Offset;            ///< The byte offset into to the BAR.<BR>
1289   #    UINT8   BarIndex;          ///< Which BAR to get the UART base address.<BR>
1290   #    UINT8   RegisterStride;    ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>
1291   #    UINT16  ReceiveFifoDepth;  ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
1292   #    UINT16  TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
1293   #    UINT8   Reserved[2];<BR>
1294   #  } PCI_SERIAL_PARAMETER;<BR>
1295   #  It contains zero or more instances of the above structure.<BR>
1296   #  For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
1297   #  to contain  two instances of the above structure, with the VendorId and DeviceId
1298   #  equals to the Device ID and Vendor ID of the device; If the PCI device uses the
1299   #  first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
1300   #  BarIndex of second one equals to 1; If the PCI device uses the first BAR to
1301   #  support both UARTs, BarIndex of both instance equals to 0, Offset of first
1302   #  instance equals to 0 and Offset of second one equals to a value bigger than or
1303   #  equal to 8.<BR>
1304   #  For certain UART whose register needs to be accessed in DWORD aligned address,
1305   #  RegisterStride equals to 4.
1306   # @Prompt Pci Serial Parameters
1307   gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
1308
1309   ## Serial Port Extended Transmit FIFO Size.  The default is 64 bytes.
1310   # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
1311   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
1312
1313   ## This PCD points to the file name GUID of the BootManagerMenuApp
1314   #  Platform can customize the PCD to point to different application for Boot Manager Menu
1315   # @Prompt Boot Manager Menu File
1316   gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
1317
1318   ## This PCD points to the formset GUID of the driver health management form
1319   #  The form will be popped up by BDS core when there are Configuration Required driver health intances.
1320   #  Platform can customize the PCD to point to different formset.
1321   # @Prompt Driver Health Management Form
1322   gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
1323
1324   ## The number of bytes between registers in serial device.  The default is 1 byte.
1325   # @Prompt Serial Port Register Stride in Bytes
1326   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
1327
1328   ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
1329   # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
1330   # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
1331   # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
1332   gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
1333
1334   ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS
1335   #  These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h
1336   #   BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>
1337   #   BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>
1338   #   BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>
1339   #   BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>
1340   #   BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>
1341   # @Prompt Exposed ACPI table versions.
1342   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
1343
1344   ## This PCD defines the MAX repair count.
1345   #  The default value is 0 that means infinite.
1346   # @Prompt MAX repair count
1347   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076
1348
1349   ## Status Code for Capsule subclass definitions.<BR><BR>
1350   #  EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE  = 0x00810000<BR>
1351   #  NOTE: The default value of this PCD may collide with other OEM specific status codes.
1352   #        Override the value of this PCD in the platform DSC file as needed.
1353   # @Prompt Status Code for Capsule subclass definitions
1354   # @ValidList  0x80000003 | 0x00810000
1355   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100
1356
1357   ## Status Code for Capsule Process Begin.<BR><BR>
1358   #  EFI_CAPSULE_PROCESS_CAPSULES_BEGIN  = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001<BR>
1359   #  NOTE: The default value of this PCD may collide with other OEM specific status codes.
1360   #        Override the value of this PCD in the platform DSC file as needed.
1361   # @Prompt Status Code for Capsule Process Begin
1362   # @ValidList  0x80000003 | 0x00008001
1363   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101
1364
1365   ## Status Code for Capsule Process End.<BR><BR>
1366   #  EFI_CAPSULE_PROCESS_CAPSULES_END    = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002<BR>
1367   #  NOTE: The default value of this PCD may collide with other OEM specific status codes.
1368   #        Override the value of this PCD in the platform DSC file as needed.
1369   # @Prompt Status Code for Capsule Process End
1370   # @ValidList  0x80000003 | 0x00008002
1371   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102
1372
1373   ## Status Code for Capsule Process Updating Firmware.<BR><BR>
1374   #  EFI_CAPSULE_UPDATING_FIRMWARE       = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003<BR>
1375   #  NOTE: The default value of this PCD may collide with other OEM specific status codes.
1376   #        Override the value of this PCD in the platform DSC file as needed.
1377   # @Prompt Status Code for Capsule Process Updating Firmware
1378   # @ValidList  0x80000003 | 0x00008003
1379   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103
1380
1381   ## Status Code for Capsule Process Update Firmware Success.<BR><BR>
1382   #  EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004<BR>
1383   #  NOTE: The default value of this PCD may collide with other OEM specific status codes.
1384   #        Override the value of this PCD in the platform DSC file as needed.
1385   # @Prompt Status Code for Capsule Process Update Firmware Success
1386   # @ValidList  0x80000003 | 0x00008004
1387   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104
1388
1389   ## Status Code for Capsule Process Update Firmware Failed.<BR><BR>
1390   #  EFI_CAPSULE_UPDATE_FIRMWARE_FAILED  = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005<BR>
1391   #  NOTE: The default value of this PCD may collide with other OEM specific status codes.
1392   #        Override the value of this PCD in the platform DSC file as needed.
1393   # @Prompt Status Code for Capsule Process Update Firmware Failed
1394   # @ValidList  0x80000003 | 0x00008005
1395   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105
1396
1397   ## Status Code for Capsule Resetting System.<BR><BR>
1398   #  EFI_CAPSULE_RESETTING_SYSTEM        = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006<BR>
1399   #  NOTE: The default value of this PCD may collide with other OEM specific status codes.
1400   #        Override the value of this PCD in the platform DSC file as needed.
1401   # @Prompt Status Code for Capsule Resetting System
1402   # @ValidList  0x80000003 | 0x00008006
1403   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106
1404
1405   ## CapsuleMax value in capsule report variable.
1406   # @Prompt CapsuleMax value in capsule report variable.
1407   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107
1408
1409 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1410   ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
1411   #  This PCD could be set to 0 then console output would be at max column and max row.
1412   # @Prompt Console output row.
1413   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
1414
1415   ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
1416   #  This PCD could be set to 0 then console output would be at max column and max row.
1417   # @Prompt Console output column.
1418   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
1419
1420   ## This PCD defines the video horizontal resolution.
1421   #  If this PCD is set to 0 then video resolution would be at highest resolution.
1422   # @Prompt Video horizontal resolution.
1423   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
1424
1425   ## This PCD defines the video vertical resolution.
1426   #  If this PCD is set to 0 then video resolution would be at highest resolution.
1427   # @Prompt Video vertical resolution.
1428   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
1429
1430   #  The 4 PCDs below are used to specify the video resolution and text mode of text setup.
1431   #  To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
1432   #  PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
1433   #  Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
1434   #  (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
1435   #  for text setup.
1436
1437   ## Specify the video horizontal resolution of text setup.
1438   # @Prompt Video Horizontal Resolution of Text Setup
1439   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
1440
1441   ## Specify the video vertical resolution of text setup.
1442   # @Prompt Video Vertical Resolution of Text Setup
1443   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
1444
1445   ## Specify the console output column of text setup.
1446   # @Prompt Console Output Column of Text Setup
1447   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
1448
1449   ## Specify the console output row of text setup.
1450   # @Prompt Console Output Row of Text Setup
1451   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
1452
1453 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1454   ## UART clock frequency is for the baud rate configuration.
1455   # @Prompt Serial Port Clock Rate.
1456   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
1457
1458   ## This PCD points to the front page formset GUID
1459   #  Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
1460   # @Prompt Front Page Formset.
1461   gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
1462
1463   ## Base address of the NV variable range in flash device.
1464   # @Prompt Base address of flash NV variable range.
1465   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
1466
1467   ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
1468   #  The root cause is that variable driver will use FTW protocol to reclaim variable region.
1469   #  If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1470   #  be reflushed through the manner of fault tolerant write.
1471   # @Prompt Size of flash NV variable range.
1472   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
1473
1474   ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1475   # @Prompt Base address of flash FTW spare block range.
1476   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
1477
1478   ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
1479   # The root cause is that variable driver will use FTW protocol to reclaim variable region.
1480   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1481   # be reflushed through the manner of fault tolerant write.
1482   # @Prompt Size of flash FTW spare block range.
1483   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
1484
1485   ## Base address of the FTW working block range in flash device.
1486   # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1487   # @Prompt Base address of flash FTW working block range.
1488   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
1489
1490   ## Size of the FTW working block range.
1491   # If the value is less than one block size, the work space range should not span blocks.
1492   # If the value is larger than one block size, it should be block size aligned.
1493   # @Prompt Size of flash FTW working block range.
1494   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
1495
1496   ## 64-bit Base address of the NV variable range in flash device.
1497   # @Prompt 64-bit Base address of flash NV variable range.
1498   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
1499
1500   ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1501   # @Prompt 64-bit Base address of flash FTW spare block range.
1502   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
1503
1504   ## 64-bit Base address of the FTW working block range in flash device.
1505   # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1506   # @Prompt 64-bit Base address of flash FTW working block range.
1507   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
1508
1509   ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
1510   #  The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
1511   # @Prompt Reserved memory range for EMU variable NV storage.
1512   gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
1513
1514   ## This PCD defines the times to print hello world string.
1515   #  This PCD is a sample to explain UINT32 PCD usage.
1516   # @Prompt HellowWorld print times.
1517   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
1518
1519   ## This PCD defines the HelloWorld print string.
1520   #  This PCD is a sample to explain String typed PCD usage.
1521   # @Prompt HelloWorld print string.
1522   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
1523
1524   ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
1525   #  The default max size is 100MB (0x6400000) for more than one large capsule images.
1526   # @Prompt Max size of populated capsule.
1527   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
1528
1529   ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
1530   #  The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
1531   # @Prompt Max size of non-populated capsule.
1532   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
1533
1534   ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
1535   # @Prompt Firmware vendor.
1536   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
1537
1538   ## Firmware revision that is the default revision filled into the EFI System Table.
1539   # @Prompt Firmware revision.
1540   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
1541
1542   ## Null-terminated Unicode string that describes the firmware version.
1543   # @Prompt Firmware version string.
1544   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
1545
1546   ## Null-terminated Unicode string that contains the date the firmware was released
1547   # @Prompt Firmware release data string.
1548   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
1549
1550   ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
1551   #  (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
1552   #  The default value in PeiPhase is 1 KBytes.<BR>
1553   #  The default value in DxePhase is 128 KBytes.<BR>
1554   # @Prompt StatusCode memory size.
1555   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
1556
1557   ## Indicates if to reset system when memory type information changes.<BR><BR>
1558   #   TRUE  - Resets system when memory type information changes.<BR>
1559   #   FALSE - Does not reset system when memory type information changes.<BR>
1560   # @Prompt Reset on memory type information change.
1561   gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
1562
1563   ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
1564   #  Only following values defined in UEFI specification are valid:<BR><BR>
1565   #  0x00 (EFI_BLACK)<BR>
1566   #  0x01 (EFI_BLUE)<BR>
1567   #  0x02 (EFI_GREEN)<BR>
1568   #  0x03 (EFI_CYAN)<BR>
1569   #  0x04 (EFI_RED)<BR>
1570   #  0x05 (EFI_MAGENTA)<BR>
1571   #  0x06 (EFI_BROWN)<BR>
1572   #  0x07 (EFI_LIGHTGRAY)<BR>
1573   #  0x08 (EFI_DARKGRAY)<BR>
1574   #  0x09 (EFI_LIGHTBLUE)<BR>
1575   #  0x0A (EFI_LIGHTGREEN)<BR>
1576   #  0x0B (EFI_LIGHTCYAN)<BR>
1577   #  0x0C (EFI_LIGHTRED)<BR>
1578   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1579   #  0x0E (EFI_YELLOW)<BR>
1580   #  0x0F (EFI_WHITE)<BR>
1581   # @Prompt Foreground color for browser subtile.
1582   # @ValidRange 0x80000004 | 0x00 - 0x0F
1583   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
1584
1585   ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
1586   #  Only following values defined in UEFI specification are valid:<BR><BR>
1587   #  0x00 (EFI_BLACK)<BR>
1588   #  0x01 (EFI_BLUE)<BR>
1589   #  0x02 (EFI_GREEN)<BR>
1590   #  0x03 (EFI_CYAN)<BR>
1591   #  0x04 (EFI_RED)<BR>
1592   #  0x05 (EFI_MAGENTA)<BR>
1593   #  0x06 (EFI_BROWN)<BR>
1594   #  0x07 (EFI_LIGHTGRAY)<BR>
1595   #  0x08 (EFI_DARKGRAY)<BR>
1596   #  0x09 (EFI_LIGHTBLUE)<BR>
1597   #  0x0A (EFI_LIGHTGREEN)<BR>
1598   #  0x0B (EFI_LIGHTCYAN)<BR>
1599   #  0x0C (EFI_LIGHTRED)<BR>
1600   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1601   #  0x0E (EFI_YELLOW)<BR>
1602   #  0x0F (EFI_WHITE)<BR>
1603   # @Prompt Foreground color for browser field.
1604   # @ValidRange 0x80000004 | 0x00 - 0x0F
1605   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
1606
1607   ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
1608   #  The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
1609   #  0x00 (EFI_BLACK)<BR>
1610   #  0x01 (EFI_BLUE)<BR>
1611   #  0x02 (EFI_GREEN)<BR>
1612   #  0x03 (EFI_CYAN)<BR>
1613   #  0x04 (EFI_RED)<BR>
1614   #  0x05 (EFI_MAGENTA)<BR>
1615   #  0x06 (EFI_BROWN)<BR>
1616   #  0x07 (EFI_LIGHTGRAY)<BR>
1617   #  0x08 (EFI_DARKGRAY)<BR>
1618   #  0x09 (EFI_LIGHTBLUE)<BR>
1619   #  0x0A (EFI_LIGHTGREEN)<BR>
1620   #  0x0B (EFI_LIGHTCYAN)<BR>
1621   #  0x0C (EFI_LIGHTRED)<BR>
1622   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1623   #  0x0E (EFI_YELLOW)<BR>
1624   #  0x0F (EFI_WHITE)<BR>
1625   # @Prompt Foreground color for highlighted browser field.
1626   # @ValidRange 0x80000004 | 0x00 - 0x0F
1627   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
1628
1629   ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
1630   #  The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
1631   #  0x00 (EFI_BACKGROUND_BLACK)<BR>
1632   #  0x10 (EFI_BACKGROUND_BLUE)<BR>
1633   #  0x20 (EFI_BACKGROUND_GREEN)<BR>
1634   #  0x30 (EFI_BACKGROUND_CYAN)<BR>
1635   #  0x40 (EFI_BACKGROUND_RED)<BR>
1636   #  0x50 (EFI_BACKGROUND_MAGENTA)<BR>
1637   #  0x60 (EFI_BACKGROUND_BROWN)<BR>
1638   #  0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
1639   # @Prompt Background color for highlighted browser field.
1640   # @ValidList  0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
1641   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
1642
1643   ## Time in second to delay for SATA devices to spin-up for recovery.
1644   # @Prompt SATA spin-up delay time in second for recovery path.
1645   gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
1646
1647   ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
1648   #  to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
1649   #  When changing the value of this PCD, the platform developer should make sure the memory size is
1650   #  large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
1651   # @Prompt Reserved page number for S3 Boot Script Runtime Table.
1652   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
1653
1654   ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
1655   #  The default size is 32K. When changing the value of this PCD, the platform developer should
1656   #  make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
1657   # @Prompt Stack size for CapsulePei transfer to long mode.
1658   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
1659
1660   ## Indicates if 1G page table will be enabled.<BR><BR>
1661   #   TRUE  - 1G page table will be enabled.<BR>
1662   #   FALSE - 1G page table will not be enabled.<BR>
1663   # @Prompt Enable 1G page table support.
1664   gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
1665
1666   ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
1667   #   TRUE  - Single Root I/O virtualization is supported.<BR>
1668   #   FALSE - Single Root I/O virtualization is not supported.<BR>
1669   # @Prompt Enable SRIOV support.
1670   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
1671
1672   ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
1673   #   TRUE  - Alternative Routing-ID is supported.<BR>
1674   #   FALSE - Alternative Routing-ID is not supported.<BR>
1675   # @Prompt Enable ARI support.
1676   gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
1677
1678   ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
1679   #   TRUE  - Multi Root I/O virtualization is supported.<BR>
1680   #   FALSE - Multi Root I/O virtualization is not supported.<BR>
1681   # @Prompt Enable MRIOV support.
1682   gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
1683
1684   ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
1685   #  BITN set indicates 2 of n+12 power<BR>
1686   #  BIT0 set indicates 4KB alignment<BR>
1687   #  BIT1 set indicates 8KB alignment<BR>
1688   # @Prompt SRIOV system page size.
1689   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
1690
1691   ## SMBIOS version.
1692   # @Prompt SMBIOS version.
1693   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0301|UINT16|0x00010055
1694
1695   ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1696   # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1697   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x1|UINT8|0x0001006A
1698
1699   ## SMBIOS produce method.
1700   #  BIT0 set indicates 32-bit entry point and table are produced.<BR>
1701   #  BIT1 set indicates 64-bit entry point and table are produced.<BR>
1702   # @Prompt The policy to produce SMBIOS entry point and table.
1703   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
1704
1705   ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
1706   #  the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
1707   # @Prompt Pad size for extension FPDT boot records.
1708   gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
1709
1710   ## Indicates if ConIn device are connected on demand.<BR><BR>
1711   #   TRUE  - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
1712   #           by Consplitter should be called before any real key read operation.<BR>
1713   #   FALSE - ConIn device may be connected normally during BDS.<BR>
1714   # @Prompt ConIn connect on demand.
1715   gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
1716
1717   ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
1718   #   TRUE  - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
1719   #   FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
1720   # @Prompt Enable ATA S.M.A.R.T feature.
1721   gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
1722
1723   ## Indicates if full PCI enumeration is disabled.<BR><BR>
1724   #   TRUE  - Full PCI enumeration is disabled.<BR>
1725   #   FALSE - Full PCI enumeration is not disabled.<BR>
1726   # @Prompt Disable full PCI enumeration.
1727   gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
1728
1729   ## Disk I/O - Number of Data Buffer block.
1730   # Define the size in block of the pre-allocated buffer. It provide better
1731   # performance for large Disk I/O requests.
1732   # @Prompt Disk I/O - Number of Data Buffer block.
1733   gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
1734
1735   ## This PCD specifies the PCI-based UFS host controller mmio base address.
1736   # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
1737   # host controllers, their mmio base addresses are calculated one by one from this base address.
1738   # @Prompt Mmio base address of pci-based UFS host controller.
1739   gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
1740
1741   ## Specify Max ESRT cache entry number supported for FMP instances
1742   #
1743   # @Prompt Max FMP ESRT entry number to be synced & cached in repository.
1744   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
1745
1746   ## Specify Max ESRT cache entry number supported for Non FMP instances
1747   #
1748   # @Prompt Max Non-FMP ESRT entry number to be cached in repository.
1749   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
1750
1751   ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
1752   #
1753   # @Prompt Flag to request system reboot after processing capsule.
1754   gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
1755
1756   ## Publish PropertiesTable or not.
1757   #
1758   # If this PCD is TRUE, DxeCore publishs PropertiesTable.
1759   # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
1760   # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
1761   # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
1762   # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
1763   #
1764   # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
1765   #   1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
1766   #      use EfiRuntimeServicesData for runtime driver PE image header and other section.
1767   #   2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
1768   #   3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
1769   #   4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
1770   #
1771   # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
1772   # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
1773   # section. If PE code/data sections are merged, the result is unpredictable.
1774   #
1775   # UEFI 2.6 specification does not recommend to use this BIT0 attribute.
1776   #
1777   # @Prompt Publish UEFI PropertiesTable.
1778   gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e
1779
1780   ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
1781   # @Prompt Default OEM ID for ACPI table creation.
1782   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
1783
1784   ## Default OEM Table ID for ACPI table creation, it is "EDK2    ".
1785   #  According to ACPI specification, this field is particularly useful when
1786   #  defining a definition block to distinguish definition block functions.
1787   #  The OEM assigns each dissimilar table a new OEM Table ID.
1788   #  This PCD is ignored for definition block.
1789   # @Prompt Default OEM Table ID for ACPI table creation.
1790   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
1791
1792   ## Default OEM Revision for ACPI table creation.
1793   #  According to ACPI specification, for LoadTable() opcode, the OS can also
1794   #  check the OEM Table ID and Revision ID against a database for a newer
1795   #  revision Definition Block of the same OEM Table ID and load it instead.
1796   #  This PCD is ignored for definition block.
1797   # @Prompt Default OEM Revision for ACPI table creation.
1798   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
1799
1800   ## Default Creator ID for ACPI table creation.
1801   #  According to ACPI specification, for tables containing Definition Blocks,
1802   #  this is the ID for the ASL Compiler.
1803   #  This PCD is ignored for definition block.
1804   # @Prompt Default Creator ID for ACPI table creation.
1805   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
1806
1807   ## Default Creator Revision for ACPI table creation.
1808   #  According to ACPI specification, for tables containing Definition Blocks,
1809   #  this is the revision for the ASL Compiler.
1810   #  This PCD is ignored for definition block.
1811   # @Prompt Default Creator Revision for ACPI table creation.
1812   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
1813
1814   ## Indicates if to set NX for stack.<BR><BR>
1815   #  For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
1816   #  For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
1817   #  IA32 PAE is supported and Execute Disable Bit is available.<BR>
1818   #   TRUE  - to set NX for stack.<BR>
1819   #   FALSE - Not to set NX for stack.<BR>
1820   # @Prompt Set NX for stack.
1821   gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
1822
1823   ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.
1824   # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC
1825   # host controllers, their mmio base addresses are calculated one by one from this base address.
1826   # @Prompt Mmio base address of pci-based SD/MMC host controller.
1827   gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043
1828
1829   ## Indicates if ACPI S3 will be enabled.<BR><BR>
1830   #   TRUE  - ACPI S3 will be enabled.<BR>
1831   #   FALSE - ACPI S3 will be disabled.<BR>
1832   # @Prompt ACPI S3 Enable.
1833   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
1834
1835   ## Specify memory size for boot script executor stack usage in S3 phase.
1836   #  The default size 32K. When changing the value make sure the memory size is large enough
1837   #  to meet boot script executor requirement in the S3 phase.
1838   # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
1839   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
1840
1841   ## Indicates if to use the optimized timing for best PS2 detection performance.
1842   #  Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>
1843   #   TRUE  - Use the optimized timing for best PS2 detection performance.<BR>
1844   #   FALSE - Use the normal timing to detect PS2.<BR>
1845   # @Prompt Enable fast PS2 detection
1846   gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044
1847
1848   ## This is recover file name in PEI phase.
1849   #  The file must be in the root directory.
1850   #  The file name must be the 8.3 format.
1851   #  The PCD data must be in UNICODE format.
1852   # @Prompt Recover file name in PEI phase
1853   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
1854
1855   ## This PCD hold a list GUIDs for the ImageTypeId to indicate the
1856   #  FMP capsule is a system FMP.
1857   # @Prompt A list of system FMP ImageTypeId GUIDs
1858   gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046
1859
1860   ## This PCD holds the address mask for page table entries when memory encryption is
1861   #  enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.
1862   #  This mask should be applied when creating 1:1 virtual to physical mapping tables.
1863   # @Prompt The address mask when memory encryption is enabled.
1864   gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047
1865
1866 [PcdsPatchableInModule]
1867   ## Specify memory size with page number for PEI code when
1868   #  Loading Module at Fixed Address feature is enabled.
1869   #  The value will be set by the build tool.
1870   # @Prompt LMFA PEI code page number.
1871   # @ValidList  0x80000001 | 0
1872   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
1873
1874   ## Specify memory size with page number for DXE boot time code when
1875   #  Loading Module at Fixed Address feature is enabled.
1876   #  The value will be set by the build tool.
1877   # @Prompt LMFA DXE boot code page number.
1878   # @ValidList  0x80000001 | 0
1879   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
1880
1881   ## Specify memory size with page number for DXE runtime code when
1882   #  Loading Module at Fixed Address feature is enabled.
1883   #  The value will be set by the build tool.
1884   # @Prompt LMFA DXE runtime code page number.
1885   # @ValidList  0x80000001 | 0
1886   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
1887
1888   ## Specify memory size with page number for SMM code when
1889   #  Loading Module at Fixed Address feature is enabled.
1890   #  The value will be set by the build tool.
1891   # @Prompt LMFA SMM code page number.
1892   # @ValidList  0x80000001 | 0
1893   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
1894
1895 [PcdsDynamic, PcdsDynamicEx]
1896   ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
1897   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1898   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1899   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1900   # @Prompt S3 Boot Script Table Private Data pointer.
1901   # @ValidList  0x80000001 | 0x0
1902   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
1903
1904   ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
1905   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1906   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1907   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1908   # @Prompt S3 Boot Script Table Private Smm Data pointer.
1909   # @ValidList  0x80000001 | 0x0
1910   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
1911
1912   ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
1913   #  Virtual to Physical mapping according to the processor physical address bits.
1914   # @Prompt Identify Mapping Page Table pointer.
1915   # @ValidList  0x80000001 | 0x0
1916   gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
1917
1918   ## This dynamic PCD holds the information if there is any test key used by the platform.
1919   # @Prompt If there is any test key used by the platform.
1920   gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
1921
1922 [PcdsDynamicEx]
1923   ## This dynamic PCD enables the default variable setting.
1924   #  Its value is the default store ID value. The default value is zero as Standard default.
1925   #  When its value is set in PEI, it will trig the default setting to be applied as the default EFI variable.
1926   # @Prompt NV Storage DefaultId
1927   gEfiMdeModulePkgTokenSpaceGuid.PcdSetNvStoreDefaultId|0x0|UINT16|0x00030004
1928
1929   ## This dynamic PCD holds the DynamicHii PCD value. Its value is the auto generated.
1930   # @Prompt NV Storage Default Value Buffer
1931   gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer|{0x0}|VOID*|0x00030005
1932
1933 [UserExtensions.TianoCore."ExtraFiles"]
1934   MdeModulePkgExtra.uni