MdeModulePkg/MdeModulePkg.dec

   1 ## @file  MdeModulePkg.dec
   2 # This package provides the modules that conform to UEFI/PI Industry standards.
   3 # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
   4 # and libraries instances, which are used for those modules.
   5 #
   6 # Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
   7 # This program and the accompanying materials are licensed and made available under
   8 # the terms and conditions of the BSD License that accompanies this distribution.
   9 # The full text of the license may be found at
  10 # http://opensource.org/licenses/bsd-license.php.
  11 #
  12 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  13 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  14 #
  15 ##
  16
  17
  18 [Defines]
  19   DEC_SPECIFICATION              = 0x00010005
  20   PACKAGE_NAME                   = MdeModulePkg
  21   PACKAGE_UNI_FILE               = MdeModulePkg.uni
  22   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  23   PACKAGE_VERSION                = 0.96
  24
  25 [Includes]
  26   Include
  27
  28
  29 [LibraryClasses]
  30   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  31   #   This library is only intended to be used by UEFI network stack modules.
  32   IpIoLib|Include/Library/IpIoLib.h
  33
  34   ##  @libraryclass  Basic function for UEFI network stack.
  35   #   This library is only intended to be used by UEFI network stack modules.
  36   NetLib|Include/Library/NetLib.h
  37
  38   ##  @libraryclass  The helper routines to access UDP service.
  39   #   This library is only intended to be used by UEFI network stack modules.
  40   UdpIoLib|Include/Library/UdpIoLib.h
  41
  42   ##  @libraryclass  The helper routines to access TCP service.
  43   #   This library is only intended to be used by UEFI network stack modules.
  44   TcpIoLib|Include/Library/TcpIoLib.h
  45
  46   ##  @libraryclass  The helper routines to access HTTP service.
  47   #   This library is only intended to be used by UEFI network stack modules.
  48   HttpLib|Include/Library/HttpLib.h
  49
  50   ##  @libraryclass  Defines a set of methods to reset whole system.
  51   ResetSystemLib|Include/Library/ResetSystemLib.h
  52
  53   ##  @libraryclass  Defines a set of methods related do S3 mode.
  54   #   This library class is no longer used and modules using this library should
  55   #   directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
  56   S3Lib|Include/Library/S3Lib.h
  57
  58   ##  @libraryclass  Defines a set of methods related recovery mode.
  59   #   This library class is no longer used and modules using this library should
  60   #   directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
  61   RecoveryLib|Include/Library/RecoveryLib.h
  62
  63   ##  @libraryclass  Provides HII related functions.
  64   HiiLib|Include/Library/HiiLib.h
  65
  66   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  67   CapsuleLib|Include/Library/CapsuleLib.h
  68
  69   ##  @libraryclass  Library for Deferred Procedure Calls.
  70   DpcLib|Include/Library/DpcLib.h
  71
  72   ##  @libraryclass    Provides global variables that are pointers
  73   #   to the UEFI HII related protocols.
  74   #
  75   UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
  76
  77   ##  @libraryclass    Provides a set of interfaces to abstract the policy of security measurement.
  78   #
  79   SecurityManagementLib|Include/Library/SecurityManagementLib.h
  80
  81   ##  @libraryclass  OEM status code libary is used to report status code to OEM device.
  82   #
  83   OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
  84
  85   ##  @libraryclass  Debug Agent is used to provide soft debug capability.
  86   #
  87   DebugAgentLib|Include/Library/DebugAgentLib.h
  88
  89   ##  @libraryclass  Provide platform specific hooks.
  90   #
  91   PlatformHookLib|Include/Library/PlatformHookLib.h
  92
  93   ##  @libraryclass  Provide platform specific hooks for SMM core.
  94   #
  95   SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
  96
  97   ##  @libraryclass  Provide capability to maintain the data integrity cross S3 phase.
  98   #
  99   LockBoxLib|Include/Library/LockBoxLib.h
 100
 101   ##  @libraryclass  Provide the CPU exception handler.
 102   #
 103   CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
 104
 105   ##  @libraryclass    Provides platform specific display interface.
 106   #
 107   CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
 108
 109   ## @libraryclass   Provides sorting functions
 110   SortLib|Include/Library/SortLib.h
 111
 112   ## @libraryclass   Provides core boot manager functions
 113   UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
 114
 115   ## @libraryclass   Provides core boot manager functions
 116   PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
 117
 118   ## @libraryclass  Provides common interfaces about TPM measurement for other modules.
 119   #
 120   TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
 121
 122   ## @libraryclass  Provides authenticated variable services.
 123   #
 124   AuthVariableLib|Include/Library/AuthVariableLib.h
 125
 126   ## @libraryclass  Provides variable check services and database management.
 127   #
 128   VarCheckLib|Include/Library/VarCheckLib.h
 129
 130   ## @libraryclass  Provides services to get variable error flag and do platform variable cleanup.
 131   #
 132   PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
 133
 134   ## @libraryclass  Provides services to get do the file explorer.
 135   #
 136   FileExplorerLib|Include/Library/FileExplorerLib.h
 137
 138   ## @libraryclass  Provides image decoding service.
 139   #
 140   ImageDecoderLib|Include/Library/ImageDecoderLib.h
 141
 142   ## @libraryclass  Provides interfaces about logo display.
 143   #
 144   BootLogoLib|Include/Library/BootLogoLib.h
 145
 146 [Guids]
 147   ## MdeModule package token space guid
 148   # Include/Guid/MdeModulePkgTokenSpace.h
 149   gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
 150
 151   ## Hob guid for Pcd DataBase
 152   #  Include/Guid/PcdDataBaseHobGuid.h
 153   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
 154
 155   ## Guid for PCD DataBase signature.
 156   # Include/Guid/PcdDataBaseSignatureGuid.h
 157   gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
 158
 159   ## Guid for EDKII implementation GUIDed opcodes
 160   #  Include/Guid/MdeModuleHii.h
 161   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
 162
 163   ## Guid for Framework vfr GUIDed opcodes.
 164   #  Include/Guid/MdeModuleHii.h
 165   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
 166
 167   ## Guid to specify the System Non Volatile FV
 168   #  Include/Guid/SystemNvDataGuid.h
 169   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
 170
 171   ## GUID used as the signature of FTW working block header.
 172   #  Include/Guid/SystemNvDataGuid.h
 173   gEdkiiWorkingBlockSignatureGuid   = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65,  0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
 174
 175   ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
 176   #  Include/Guid/FaultTolerantWrite.h
 177   gEdkiiFaultTolerantWriteGuid      = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83,  0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
 178
 179   ## Guid specify the device is the console out device.
 180   #  Include/Guid/ConsoleOutDevice.h
 181   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 182
 183   ## Guid specify the device is the console in device.
 184   #  Include/Guid/ConsoleInDevice.h
 185   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 186
 187   ## Hob and Variable guid specify the platform memory type information.
 188   #  Include/Guid/MemoryTypeInformation.h
 189   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
 190
 191   ## Capsule update hob and variable guid
 192   #  Include/Guid/CapsuleVendor.h
 193   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
 194
 195   ## Guid specifiy the device is the StdErr device.
 196   #  Include/Guid/StandardErrorDevice.h
 197   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 198
 199   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
 200   #  Include/Guid/VariableFormat.h
 201   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
 202
 203   ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
 204   #  Include/Guid/AuthenticatedVariableFormat.h
 205   gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
 206
 207   #  Include/Guid/VariableIndexTable.h
 208   gEfiVariableIndexTableGuid  = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
 209
 210   ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
 211   #  Include/Guid/SmmVariableCommon.h
 212   gSmmVariableWriteGuid  = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
 213
 214   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
 215   #  Include/Guid/Performance.h
 216   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
 217   gSmmPerformanceProtocolGuid    = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa,  0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
 218   gPerformanceExProtocolGuid     = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1,  0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
 219   gSmmPerformanceExProtocolGuid  = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6,  0x30, 0xe3, 0xe,  0xe5 } }
 220
 221   ## Guid is defined for CRC32 encapsulation scheme.
 222   #  Include/Guid/Crc32GuidedSectionExtraction.h
 223   gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
 224
 225   ## Include/Guid/StatusCodeCallbackGuid.h
 226   gStatusCodeCallbackGuid   = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
 227
 228   ## GUID identifies status code records HOB that originate from the PEI status code
 229   #  Include/Guid/MemoryStatusCodeRecord.h
 230   gMemoryStatusCodeRecordGuid     = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
 231
 232   ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
 233   #  Include/Guid/StatusCodeDataTypeDebug.h
 234   gEfiStatusCodeDataTypeDebugGuid  = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
 235
 236   ##  A configuration Table Guid for Load module at fixed address
 237   #  Include/Guid/LoadModuleAtFixedAddress.h
 238   gLoadFixedAddressConfigurationTableGuid  = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
 239
 240   ## GUID used to store the global debug mask value into an EFI Variable
 241   # Include/Guid/DebugMask.h
 242   gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
 243
 244   ##  Event for the DXE Core to signal idle events
 245   #  Include/Guid/EventIdle.h
 246   gIdleLoopEventGuid  = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
 247
 248   ## Include/Guid/RecoveryDevice.h
 249   gRecoveryOnFatUsbDiskGuid          = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
 250
 251   ## Include/Guid/RecoveryDevice.h
 252   gRecoveryOnFatIdeDiskGuid          = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
 253
 254   ## Include/Guid/RecoveryDevice.h
 255   gRecoveryOnFatFloppyDiskGuid       = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
 256
 257   ## Include/Guid/RecoveryDevice.h
 258   gRecoveryOnDataCdGuid              = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
 259
 260   ## Include/Guid/SmmLockBox.h
 261   gEfiSmmLockBoxCommunicationGuid    = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
 262
 263   ## Include/Guid/AcpiS3Context.h
 264   gEfiAcpiVariableGuid               = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
 265
 266   ## Include/Guid/AcpiS3Context.h
 267   gEfiAcpiS3ContextGuid              = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
 268
 269   ## Include/Guid/BootScriptExecutorVariable.h
 270   gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
 271   gEfiBootScriptExecutorContextGuid  = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
 272
 273   ## Include/Guid/UsbKeyBoardLayout.h
 274   gUsbKeyboardLayoutPackageGuid      = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
 275   gUsbKeyboardLayoutKeyGuid          = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
 276
 277   ## Include/Guid/HiiResourceSampleHii.h
 278   gHiiResourceSamleFormSetGuid       = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
 279
 280   ## Include/Guid/DriverSampleHii.h
 281   gDriverSampleFormSetGuid           = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
 282   gDriverSampleInventoryGuid         = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
 283   gEfiIfrRefreshIdOpGuid             = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
 284
 285   ## Include/Guid/PlatDriOverrideHii.h
 286   gPlatformOverridesManagerGuid      = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
 287
 288   ## Include/Guid/Ip4Config2Hii.h
 289   gIp4Config2NvDataGuid              = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
 290
 291   ## Include/Guid/VlanConfigHii.h
 292   gVlanConfigFormSetGuid             = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
 293
 294   ## Include/Guid/Ip4IScsiConfigHii.h
 295   gIp4IScsiConfigGuid                = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
 296   gIScsiCHAPAuthInfoGuid             = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
 297
 298   ## Include/Guid/ZeroGuid.h
 299   gZeroGuid                          = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
 300
 301   ## Include/Guid/MtcVendor.h
 302   gMtcVendorGuid                     = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
 303
 304   ## Guid for Firmware Performance Data Table (FPDT) implementation.
 305   #  Include/Guid/FirmwarePerformance.h
 306   gEfiFirmwarePerformanceGuid        = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
 307   gFirmwarePerformanceS3PointerGuid  = { 0xdc65adc,  0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
 308
 309   ## Include/Guid/ExitBootServiceFailed.h
 310   gEventExitBootServicesFailedGuid   = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
 311
 312   ## Include/Guid/ConnectConInEvent.h
 313   gConnectConInEventGuid             = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
 314
 315   ## Include/Guid/StatusCodeDataTypeVariable.h
 316   gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
 317
 318   ## Include/Guid/MemoryProfile.h
 319   gEdkiiMemoryProfileGuid              = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
 320
 321   ## Include/Protocol/VarErrorFlag.h
 322   gEdkiiVarErrorFlagGuid               = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
 323
 324   ## GUID indicates the LZMA custom compress/decompress algorithm.
 325   #  Include/Guid/LzmaDecompress.h
 326   gLzmaCustomDecompressGuid      = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
 327   gLzmaF86CustomDecompressGuid     = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
 328
 329   ## Include/Guid/TtyTerm.h
 330   gEfiTtyTermGuid                = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
 331
 332   ## Include/Guid/HiiBootMaintenanceFormset.h
 333   gEfiIfrBootMaintenanceGuid      = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
 334
 335   gEfiIfrFrontPageGuid        = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
 336
 337
 338 [Ppis]
 339   ## Include/Ppi/AtaController.h
 340   gPeiAtaControllerPpiGuid       = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
 341
 342   ## Include/Ppi/UsbHostController.h
 343   gPeiUsbHostControllerPpiGuid   = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
 344
 345   ## Include/Ppi/Usb2HostController.h
 346   gPeiUsb2HostControllerPpiGuid  = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22   }}
 347
 348   ## Include/Ppi/UsbController.h
 349   gPeiUsbControllerPpiGuid       = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
 350
 351   ## Include/Ppi/UsbIo.h
 352   gPeiUsbIoPpiGuid               = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
 353
 354   ## Include/Ppi/SecPerformance.h
 355   gPeiSecPerformancePpiGuid      = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
 356
 357   ## Include/Ppi/SmmCommunication.h
 358   gEfiPeiSmmCommunicationPpiGuid   =  { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
 359
 360   ## Include/Ppi/SmmAccess.h
 361   gPeiSmmAccessPpiGuid          =  { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
 362
 363   ## Include/Ppi/SmmControl.h
 364   gPeiSmmControlPpiGuid         =  { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
 365
 366   ## Include/Ppi/PostBootScriptTable.h
 367   gPeiPostScriptTablePpiGuid    =  { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
 368
 369   ## Include/Ppi/SerialPortPei.h
 370   gPeiSerialPortPpiGuid         =  { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
 371
 372   ## Include/Ppi/UfsHostController.h
 373   gEdkiiPeiUfsHostControllerPpiGuid  =  { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
 374
 375 [Protocols]
 376   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
 377   #  Include/Protocol/LoadPe32Image.h
 378   #  This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
 379   #  If developer need implement such functionality, they should use BasePeCoffLib.
 380   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
 381
 382   ## Print protocol defines basic print functions to print the format unicode and ascii string.
 383   # Include/Protocol/Print2.h
 384   gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
 385
 386   ## This protocol defines the generic memory test interfaces in Dxe phase.
 387   # Include/Protocol/GenericMemoryTest.h
 388   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
 389
 390   ## Include/Protocol/Dpc.h
 391   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
 392
 393   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
 394   #  Include/Protocol/FaultTolerantWrite.h
 395   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 396
 397   ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
 398   #  Include/Protocol/SmmFaultTolerantWrite.h
 399   gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
 400
 401   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
 402   #  Include/Protocol/SwapAddressRange.h
 403   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
 404
 405   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
 406   #  Include/Protocol/SmmSwapAddressRange.h
 407   gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
 408
 409   ## This protocol is intended for use as a means to store data in the EFI SMM environment.
 410   #  Include/Protocol/SmmVariableProtocol.h
 411   gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
 412
 413   ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
 414   #  Include/Protocol/VariableLock.h
 415   gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
 416
 417   ## Include/Protocol/VarCheck.h
 418   gEdkiiVarCheckProtocolGuid     = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
 419
 420   ## Include/Protocol/SmmVarCheck.h
 421   gEdkiiSmmVarCheckProtocolGuid  = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
 422
 423   ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
 424   #  Include/Protocol/SmmFirmwareVolumeBlock.h
 425   gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
 426
 427   ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
 428   # Include/Guid/DebugMask.h
 429   gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
 430
 431   ## Include/Protocol/LockBox.h
 432   gEfiLockBoxProtocolGuid        = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
 433
 434   ## Include/Protocol/FormBrowserEx.h
 435   gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
 436
 437   ## Include/Protocol/EbcVmTest.h
 438   gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
 439
 440   ## Include/Protocol/EbcSimpleDebugger.h
 441   gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
 442
 443   ## Include/Protocol/BootLogo.h
 444   gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
 445
 446   ## Include/Protocol/DisplayProtocol.h
 447   gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
 448
 449   ## Include/Protocol/FormBrowserEx2.h
 450   gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
 451
 452   ## Include/Protocol/UfsHostController.h
 453   gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
 454
 455   ## Include/Protocol/EsrtManagement.h
 456   gEsrtManagementProtocolGuid         = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
 457
 458   ## Include/Protocol/SmmExitBootServices.h
 459   gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
 460
 461   ## Include/Protocol/SmmLegacyBoot.h
 462   gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
 463
 464   ## Include/Protocol/SmmReadyToBoot.h
 465   gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
 466
 467   ## Include/Protocol/PlatformLogo.h
 468   gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }
 469
 470   ## Include/Protocol/FileExplorer.h
 471   gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
 472
 473 #
 474 # [Error.gEfiMdeModulePkgTokenSpaceGuid]
 475 #   0x80000001 | Invalid value provided.
 476 #   0x80000002 | Reserved bits must be set to zero.
 477 #   0x80000003 | Incorrect progress code provided.
 478 #   0x80000004 | Invalid foreground color specified.
 479 #   0x80000005 | Invalid background color specified.
 480 #   0x80000006 | Incorrect error code provided.
 481 #
 482
 483 [PcdsFeatureFlag]
 484   ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
 485   #   TRUE  - Supports update capsule across a system reset.<BR>
 486   #   FALSE - Does not support update capsule across a system reset.<BR>
 487   # @Prompt Enable update capsule across a system reset.
 488   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
 489
 490   ## Indicates if all PCD PPI services will be enabled.<BR><BR>
 491   #   TRUE  - All PCD PPI services will be produced.<BR>
 492   #   FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
 493   # @Prompt Enable full PEI PCD services.
 494   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
 495
 496   ## Indicates if the Device Path To Text Protocol should be produced by the platform.
 497   #  It can be disabled to save size.<BR><BR>
 498   #   TRUE  - Device Path To Text Protocol will be produced.<BR>
 499   #   FALSE - Device Path To Text Protocol will not be produced.<BR>
 500   # @Prompt Enable Device Path to Text support.
 501   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
 502
 503   ## Indicates if the Device Path From Text Protocol should be produced by the platform.
 504   #  It can be disabled to save size.<BR><BR>
 505   #   TRUE  - Device Path From Text Protocol will be produced.<BR>
 506   #   FALSE - Device Path From Text Protocol will not be produced.<BR>
 507   # @Prompt Enable Device Path From Text support.
 508   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
 509
 510   ## Indicates if the statistics about variable usage will be collected. This information is
 511   #  stored as a vendor configuration table into the EFI system table.
 512   #  Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
 513   #  variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
 514   #   TRUE  - Statistics about variable usage will be collected.<BR>
 515   #   FALSE - Statistics about variable usage will not be collected.<BR>
 516   # @Prompt Enable variable statistics collection.
 517   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
 518
 519   ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
 520   #   TRUE  - Installs Unicode Collation Protocol.<BR>
 521   #   FALSE - Does not install Unicode Collation Protocol.<BR>
 522   # @Prompt Enable Unicode Collation support.
 523   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
 524
 525   ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
 526   #   TRUE  - Installs Unicode Collation 2 Protocol.<BR>
 527   #   FALSE - Does not install Unicode Collation 2 Protocol.<BR>
 528   # @Prompt Enable Unicode Collation 2 support.
 529   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
 530
 531   ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
 532   #  It could be set FALSE to save size.<BR><BR>
 533   #   TRUE  - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
 534   #   FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
 535   # @Prompt Enable ConOut GOP support.
 536   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
 537
 538   ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
 539   #  It could be set FALSE to save size.<BR><BR>
 540   #   TRUE  - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
 541   #   FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
 542   # @Prompt Enable ConOut UGA support.
 543   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
 544
 545   ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
 546   #  This PCD is used to tune PEI phase performance to reduce the search image time.
 547   #  It can be set according to the generated image section type.<BR><BR>
 548   #   TRUE  - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
 549   #   FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
 550   # @Prompt PeiCore search TE section first.
 551   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
 552
 553   ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
 554   #  interrupt to access usb device in the case of absence of usb stack.
 555   #  DUET platform requires the token to be TRUE.<BR><BR>
 556   #   TRUE  - Turn off usb legacy support.<BR>
 557   #   FALSE - Does not turn off usb legacy support.<BR>
 558   # @Prompt Turn off USB legacy support.
 559   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
 560
 561   ## Indicates if HiiImageProtocol will be installed.
 562   #  FALSE is for size reduction.<BR><BR>
 563   #   TRUE  - Installs HiiImageProtocol.<BR>
 564   #   FALSE - Does not install HiiImageProtocol.<BR>
 565   # @Prompt Enable HII image support.
 566   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
 567
 568   ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
 569   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
 570   #  from HII database.<BR><BR>
 571   #   TRUE  - USB KeyBoard Driver will disable the default keyboard layout.<BR>
 572   #   FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
 573   # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
 574   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
 575
 576   ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
 577   #   TRUE  - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
 578   #           the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
 579   #   FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
 580   #           the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
 581   # @Prompt Enable framework backward compatibility support.
 582   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
 583
 584   ## Indicates if HelloWorld Application will print the verbose information.
 585   #  This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
 586   #   TRUE  - HelloWorld Application will print the verbose information.<BR>
 587   #   FALSE - HelloWorld Application will not print the verbose information.<BR>
 588   # @Prompt Enable HelloWorld print.
 589   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
 590
 591   ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
 592   #   TRUE  - Produces FULL FTW protocol services (total six APIs).<BR>
 593   #   FALSE - Only FTW Write service is available.<BR>
 594   # @Prompt Enable FULL FTW services.
 595   gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
 596
 597   ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
 598   #   TRUE  - DXE IPL will support UEFI decompression.<BR>
 599   #   FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
 600   # @Prompt Enable UEFI decompression support in DXE IPL.
 601   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
 602
 603   ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
 604   #   TRUE  - PciBus driver supports the hot plug device.<BR>
 605   #   FALSE - PciBus driver doesn't support the hot plug device.<BR>
 606   # @Prompt Enable PciBus hot plug device support.
 607   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
 608
 609   ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
 610   #   TRUE  - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
 611   #   FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
 612   # @Prompt Enable PCI bridge IO alignment probe.
 613   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
 614
 615   ## Indicates if StatusCode is reported via Serial port.<BR><BR>
 616   #   TRUE  - Reports StatusCode via Serial port.<BR>
 617   #   FALSE - Does not report StatusCode via Serial port.<BR>
 618   # @Prompt Enable StatusCode via Serial port.
 619   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
 620
 621   ## Indicates if StatusCode is stored in memory.
 622   #  The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
 623   #   TRUE  - Stores StatusCode in memory.<BR>
 624   #   FALSE - Does not store StatusCode in memory.<BR>
 625   # @Prompt Enable StatusCode via memory.
 626   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
 627
 628   ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
 629   #   TRUE  - Replays PEI phase StatusCode in DXE phased.<BR>
 630   #   FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
 631   # @Prompt Enable PEI StatusCode replay in DXE phase
 632   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
 633
 634   ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
 635   #   TRUE  - Installs ACPI SDT protocol.<BR>
 636   #   FALSE - Does not install ACPI SDT protocol.<BR>
 637   # @Prompt Enable ACPI SDT support.
 638   gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
 639
 640   ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
 641   #  The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
 642   #   TRUE  - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
 643   #   FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
 644   # @Prompt Enable unaligned PCI I/O support.
 645   gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
 646
 647   ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
 648   #   TRUE  - TEXT statement will always be set to GrayOut.<BR>
 649   #   FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
 650   # @Prompt Always GrayOut TEXT statement.
 651   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
 652
 653   ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
 654   #   TRUE  - The unselectable menu will be set to GrayOut.<BR>
 655   #   FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
 656   # @Prompt GrayOut read only menu.
 657   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
 658
 659   ## Indicates if recovery from IDE disk will be supported.<BR><BR>
 660   #   TRUE  - Supports recovery from IDE disk.<BR>
 661   #   FALSE - Does not support recovery from IDE disk.<BR>
 662   # @Prompt Enable recovery on IDE disk.
 663   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
 664
 665   ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
 666   #   TRUE  - Supports recovery from FAT floppy disk.<BR>
 667   #   FALSE - Does not support recovery from FAT floppy disk.<BR>
 668   # @Prompt Enable recovery on FAT floppy disk.
 669   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
 670
 671   ## Indicates if recovery from data CD will be supported.<BR><BR>
 672   #   TRUE  - Supports recovery from data CD.<BR>
 673   #   FALSE - Does not support recovery from data CD.<BR>
 674   # @Prompt Enable recovery on data CD.
 675   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
 676
 677   ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
 678   #   TRUE  - Supports recovery from USB disk.<BR>
 679   #   FALSE - Does not support recovery from USB disk.<BR>
 680   # @Prompt Enable recovery on FAT USB disk.
 681   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
 682
 683   ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
 684   #   TRUE  - S3 performance data will be supported in ACPI FPDT table.<BR>
 685   #   FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
 686   # @Prompt Enable S3 performance data support.
 687   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
 688
 689   ## Indicates if Serial device uses half hand shake.<BR><BR>
 690   #   TRUE  - Serial device uses half hand shake.<BR>
 691   #   FALSE - Serial device doesn't use half hand shake.<BR>
 692   # @Prompt Enable Serial device Half Hand Shake
 693   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
 694
 695 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
 696   ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
 697   #  It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
 698   #  is built in firmware.<BR><BR>
 699   #   TRUE  - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
 700   #   FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
 701   # @Prompt DxeIpl switch to long mode.
 702   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
 703
 704   ## Indicates if DxeIpl should rebuild page tables. This flag only
 705   #  makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
 706   #   TRUE  - DxeIpl will rebuild page tables.<BR>
 707   #   FALSE - DxeIpl will not rebuild page tables.<BR>
 708   # @Prompt DxeIpl rebuild page tables.
 709   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
 710
 711 [PcdsFixedAtBuild]
 712   ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
 713   #  0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
 714   #  0:                  Disable the feature.<BR>
 715   #  Other Value:        Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
 716   # @Prompt Enable LMFA feature.
 717   # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
 718   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
 719
 720   ## Progress Code for OS Loader LoadImage start.<BR><BR>
 721   #  PROGRESS_CODE_OS_LOADER_LOAD   = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
 722   # @Prompt Progress Code for OS Loader LoadImage start.
 723   # @ValidList  0x80000003 | 0x03058000
 724   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
 725
 726   ## Progress Code for OS Loader StartImage start.<BR><BR>
 727   #  PROGRESS_CODE_OS_LOADER_START  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
 728   # @Prompt Progress Code for OS Loader StartImage start.
 729   # @ValidList  0x80000003 | 0x03058001
 730   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
 731
 732   ## Progress Code for S3 Suspend start.<BR><BR>
 733   #  PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000))    = 0x03078000<BR>
 734   # @Prompt Progress Code for S3 Suspend start.
 735   # @ValidList  0x80000003 | 0x03078000
 736   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
 737
 738   ## Progress Code for S3 Suspend end.<BR><BR>
 739   #  PROGRESS_CODE_S3_SUSPEND_END   = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001))    = 0x03078001<BR>
 740   # @Prompt Progress Code for S3 Suspend end.
 741   # @ValidList  0x80000003 | 0x03078001
 742   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
 743
 744   ## Error Code for SetVariable failure.<BR><BR>
 745   #  EDKII_ERROR_CODE_SET_VARIABLE  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
 746   # @Prompt Error Code for SetVariable failure.
 747   # @ValidList  0x80000006 | 0x03058002
 748   gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
 749
 750 [PcdsFixedAtBuild, PcdsPatchableInModule]
 751   ## Dynamic type PCD can be registered callback function for Pcd setting action.
 752   #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
 753   #  for a dynamic PCD used in PEI phase.
 754   # @Prompt Max PEI PCD callback number per PCD entry.
 755   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
 756
 757   ## VPD type PCD  allows a developer to point to an absolute physical address PcdVpdBaseAddress
 758   #  to store PCD value.
 759   # @Prompt VPD base address.
 760   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
 761
 762   ## Maximum number of FV is supported by PeiCore's dispatching.
 763   # @Prompt Maximum number of FV supported by PeiCore.
 764   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
 765
 766   ## Maximum File count in every FV is supported by PeiCore's dispatching.
 767   #  PeiCore supported File type includes PEIM, Combined PEIM and FV.
 768   # @Prompt Maximum File count per FV supported by PeiCore.
 769   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
 770
 771   ## Maximum stack size for PeiCore.
 772   # @Prompt Maximum stack size for PeiCore.
 773   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
 774
 775   ## Maximum PPI count is supported by PeiCore's PPI database.
 776   # @Prompt Maximum PPI count supported by PeiCore.
 777   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
 778
 779   ## The maximum size of a single non-HwErr type variable.
 780   # @Prompt Maximum variable size.
 781   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
 782
 783   ## The maximum size of a single authenticated variable.
 784   # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
 785   # @Prompt Maximum authenticated variable size.
 786   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
 787
 788   ## The maximum size of single hardware error record variable.<BR><BR>
 789   # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
 790   # In IA64 platforms, this value should be larger than 128KB.<BR>
 791   # @Prompt Maximum HwErr variable size.
 792   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
 793
 794   ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
 795   # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
 796   # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
 797   # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
 798   # @Prompt HwErr variable storage size.
 799   gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
 800
 801   ## The size of maximum user NV variable space.<BR><BR>
 802   # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
 803   # If the value is 0, it means user variable share the same NV storage with system variable,
 804   # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
 805   # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
 806   # otherwise the variable will be regarded as user variable.<BR>
 807   #  1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
 808   #  2) Variables managed by Variable driver internally.<BR>
 809   #  3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
 810   #  4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
 811   # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
 812   # @Prompt Maximum user NV variable space size.
 813   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
 814
 815   ## The size of NV variable space reserved at UEFI boottime.<BR><BR>
 816   # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
 817   # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
 818   # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
 819   # Then the common NV variable space size at boottime will be
 820   #  (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
 821   # and the common NV variable space size at runtime will be
 822   #  (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
 823   # @Prompt Boottime reserved NV variable space size.
 824   gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
 825
 826   ## Reclaim variable space at EndOfDxe.<BR><BR>
 827   # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
 828   # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
 829   # @Prompt Reclaim variable space at EndOfDxe.
 830   gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
 831
 832   ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
 833   # @Prompt Variable storage size.
 834   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
 835
 836   ## FFS filename to find the ACPI tables.
 837   # @Prompt FFS name of ACPI tables storage.
 838   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
 839
 840   ## FFS filename to find the capsule coalesce image.
 841   # @Prompt FFS name of capsule coalesce image.
 842   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
 843
 844   ## Maximum number of performance log entries during PEI phase.
 845   # @Prompt Maximum number of PEI performance log entries.
 846   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
 847
 848   ## RTC Update Timeout Value(microsecond).
 849   # @Prompt RTC Update Timeout Value.
 850   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
 851
 852   ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
 853   #   TRUE  - 16550 serial port registers are in MMIO space.<BR>
 854   #   FALSE - 16550 serial port registers are in I/O space.<BR>
 855   # @Prompt Serial port registers use MMIO.
 856   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
 857
 858   ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
 859   #   TRUE  - 16550 serial port hardware flow control will be enabled.<BR>
 860   #   FALSE - 16550 serial port hardware flow control will be disabled.<BR>
 861   # @Prompt Enable serial port hardware flow control.
 862   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
 863
 864   ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
 865   #  This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
 866   #   TRUE  - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
 867   #   FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
 868   # @Prompt Enable serial port cable detetion.
 869   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
 870
 871   ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
 872   # @Prompt Base address of serial port registers.
 873   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
 874
 875   ## Baud rate for the 16550 serial port.  Default is 115200 baud.
 876   # @Prompt Baud rate for serial port.
 877   # @ValidList  0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
 878   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
 879
 880   ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
 881   #    BIT1..BIT0 - Data bits.  00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
 882   #    BIT2       - Stop Bits.  0 = 1 stop bit.  1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
 883   #    BIT5..BIT3 - Parity.  xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
 884   #    BIT7..BIT6 - Reserved.  Must be 0.<BR>
 885   #
 886   #  Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
 887   # @Prompt Serial port Line Control settings.
 888   # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
 889   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
 890
 891   ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
 892   #    BIT0       - FIFO Enable.  0 = Disable FIFOs.  1 = Enable FIFOs.<BR>
 893   #    BIT1       - Clear receive FIFO.  1 = Clear FIFO.<BR>
 894   #    BIT2       - Clear transmit FIFO.  1 = Clear FIFO.<BR>
 895   #    BIT4..BIT3 - Reserved.  Must be 0.<BR>
 896   #    BIT5       - Enable 64-byte FIFO.  0 = Disable 64-byte FIFO.  1 = Enable 64-byte FIFO<BR>
 897   #    BIT7..BIT6 - Reserved.  Must be 0.<BR>
 898   #
 899   #  Default is to enable and clear all FIFOs.<BR>
 900   # @Prompt Serial port FIFO Control settings.
 901   # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
 902   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
 903
 904   ## This setting can override the default TFTP block size. A value of 0 computes
 905   # the default from MTU information. A non-zero value will be used as block size
 906   # in bytes.
 907   # @Prompt TFTP block size.
 908   gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
 909
 910   ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
 911   #  structure. The default value for this PCD is 0, which means that the DXE Core
 912   #  will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
 913   #  boundary as close to the top of memory as feasible.  If this PCD is set to a
 914   #  value other than 0, then the DXE Core will first attempt to allocate the
 915   #  EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
 916   #  by this PCD, and if that allocation fails, retry the allocation on a 4MB
 917   #  boundary as close to the top of memory as feasible.
 918   # @Prompt Maximum Efi System Table Pointer address.
 919   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
 920
 921   ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
 922   #   TRUE  - Shadow PEIM on S3 boot path after memory is ready.<BR>
 923   #   FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
 924   # @Prompt Shadow Peim On S3 Boot.
 925   gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
 926
 927   ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
 928   #  This PCD is used on other boot path except for S3 boot.
 929   #   TRUE  - Shadow PEIM and PeiCore after memory is ready.<BR>
 930   #   FALSE - Not shadow PEIM after memory is ready.<BR>
 931   # @Prompt Shadow Peim and PeiCore on boot
 932   gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
 933
 934   ## The mask is used to control memory profile behavior.<BR><BR>
 935   #  BIT0 - Enable UEFI memory profile.<BR>
 936   #  BIT1 - Enable SMRAM profile.<BR>
 937   # @Prompt Memory Profile Property.
 938   # @Expression  0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0
 939   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
 940
 941   ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
 942   # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
 943   #
 944   # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
 945   #  EfiReservedMemoryType          0x0001<BR>
 946   #  EfiLoaderCode                  0x0002<BR>
 947   #  EfiLoaderData                  0x0004<BR>
 948   #  EfiBootServicesCode            0x0008<BR>
 949   #  EfiBootServicesData            0x0010<BR>
 950   #  EfiRuntimeServicesCode         0x0020<BR>
 951   #  EfiRuntimeServicesData         0x0040<BR>
 952   #  EfiConventionalMemory          0x0080<BR>
 953   #  EfiUnusableMemory              0x0100<BR>
 954   #  EfiACPIReclaimMemory           0x0200<BR>
 955   #  EfiACPIMemoryNVS               0x0400<BR>
 956   #  EfiMemoryMappedIO              0x0800<BR>
 957   #  EfiMemoryMappedIOPortSpace     0x1000<BR>
 958   #  EfiPalCode                     0x2000<BR>
 959   #  EfiPersistentMemory            0x4000<BR>
 960   #  OEM Reserved       0x4000000000000000<BR>
 961   #  OS Reserved        0x8000000000000000<BR>
 962   #
 963   # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
 964   #
 965   # @Prompt Memory profile memory type.
 966   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
 967
 968   ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
 969   #  information that describes the path that contains zero or more PCI to PCI briges
 970   #  followed by a PCI serial device.  Each array entry is 4-bytes in length.  The
 971   #  first byte is the PCI Device Number, then second byte is the PCI Function Number,
 972   #  and the last two bytes are the offset to the PCI power management capabilities
 973   #  register used to manage the D0-D3 states.  If a PCI power management capabilities
 974   #  register is not present, then the last two bytes in the offset is set to 0.  The
 975   #  array is terminated by an array entry with a PCI Device Number of 0xFF.  For a
 976   #  non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
 977   # @Prompt Pci Serial Device Info
 978   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
 979
 980   ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
 981   #  BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
 982   #  describes the parameters of special PCI serial devices.
 983   #  Each array entry is 24-byte in length. The array is terminated
 984   #  by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
 985   #  standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
 986   #  The C style structure is defined as below:
 987   #  typedef struct {
 988   #    UINT16  VendorId;          ///< Vendor ID to match the PCI device.  The value 0xFFFF terminates the list of entries.
 989   #    UINT16  DeviceId;          ///< Device ID to match the PCI device
 990   #    UINT32  ClockRate;         ///< UART clock rate.  Set to 0 for default clock rate of 1843200 Hz
 991   #    UINT64  Offset;            ///< The byte offset into to the BAR
 992   #    UINT8   BarIndex;          ///< Which BAR to get the UART base address
 993   #    UINT8   RegisterStride;    ///< UART register stride in bytes.  Set to 0 for default register stride of 1 byte.
 994   #    UINT16  ReceiveFifoDepth;  ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
 995   #    UINT16  TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
 996   #    UINT8   Reserved[2];
 997   #  } PCI_SERIAL_PARAMETER;
 998   #  It contains zero or more instances of the above structure.
 999   #  For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
1000   #  to contain  two instances of the above structure, with the VendorId and DeviceId
1001   #  equals to the Device ID and Vendor ID of the device; If the PCI device uses the
1002   #  first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
1003   #  BarIndex of second one equals to 1; If the PCI device uses the first BAR to
1004   #  support both UARTs, BarIndex of both instance equals to 0, Offset of first
1005   #  instance equals to 0 and Offset of second one equals to a value bigger than or
1006   #  equal to 8.
1007   #  For certain UART whose register needs to be accessed in DWORD aligned address,
1008   #  RegisterStride equals to 4.
1009   # @Prompt Pci Serial Parameters
1010   gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
1011
1012   ## Serial Port Extended Transmit FIFO Size.  The default is 64 bytes.
1013   # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
1014   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
1015
1016   ## This PCD points to the file name GUID of the BootManagerMenuApp
1017   #  Platform can customize the PCD to point to different application for Boot Manager Menu
1018   # @Prompt Boot Manager Menu File
1019   gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
1020
1021   ## This PCD points to the formset GUID of the driver health management form
1022   #  The form will be popped up by BDS core when there are Configuration Required driver health intances.
1023   #  Platform can customize the PCD to point to different formset.
1024   # @Prompt Driver Health Management Form
1025   gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
1026
1027   ## The number of bytes between registers in serial device.  The default is 1 byte.
1028   # @Prompt Serial Port Register Stride in Bytes
1029   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
1030
1031   ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
1032   # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
1033   # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
1034   # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
1035   gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
1036
1037 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1038   ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
1039   #  This PCD could be set to 0 then console output would be at max column and max row.
1040   # @Prompt Console output row.
1041   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
1042
1043   ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
1044   #  This PCD could be set to 0 then console output would be at max column and max row.
1045   # @Prompt Console output column.
1046   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
1047
1048   ## This PCD defines the video horizontal resolution.
1049   #  If this PCD is set to 0 then video resolution would be at highest resolution.
1050   # @Prompt Video horizontal resolution.
1051   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
1052
1053   ## This PCD defines the video vertical resolution.
1054   #  If this PCD is set to 0 then video resolution would be at highest resolution.
1055   # @Prompt Video vertical resolution.
1056   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
1057
1058   #  The 4 PCDs below are used to specify the video resolution and text mode of text setup.
1059   #  To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
1060   #  PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
1061   #  Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
1062   #  (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
1063   #  for text setup.
1064
1065   ## Specify the video horizontal resolution of text setup.
1066   # @Prompt Video Horizontal Resolution of Text Setup
1067   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
1068
1069   ## Specify the video vertical resolution of text setup.
1070   # @Prompt Video Vertical Resolution of Text Setup
1071   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
1072
1073   ## Specify the console output column of text setup.
1074   # @Prompt Console Output Column of Text Setup
1075   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
1076
1077   ## Specify the console output row of text setup.
1078   # @Prompt Console Output Row of Text Setup
1079   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
1080
1081 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1082   ## UART clock frequency is for the baud rate configuration.
1083   # @Prompt Serial Port Clock Rate.
1084   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
1085
1086   ## This PCD points to the front page formset GUID
1087   #  Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
1088   # @Prompt Front Page Formset.
1089   gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
1090
1091   ## Base address of the NV variable range in flash device.
1092   # @Prompt Base address of flash NV variable range.
1093   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
1094
1095   ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
1096   #  The root cause is that variable driver will use FTW protocol to reclaim variable region.
1097   #  If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1098   #  be reflushed through the manner of fault tolerant write.
1099   # @Prompt Size of flash NV variable range.
1100   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
1101
1102   ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1103   # @Prompt Base address of flash FTW spare block range.
1104   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
1105
1106   ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
1107   # The root cause is that variable driver will use FTW protocol to reclaim variable region.
1108   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1109   # be reflushed through the manner of fault tolerant write.
1110   # @Prompt Size of flash FTW spare block range.
1111   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
1112
1113   ## Base address of the FTW working block range in flash device.
1114   # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1115   # @Prompt Base address of flash FTW working block range.
1116   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
1117
1118   ## Size of the FTW working block range.
1119   # If the value is less than one block size, the work space range should not span blocks.
1120   # If the value is larger than one block size, it should be block size aligned.
1121   # @Prompt Size of flash FTW working block range.
1122   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
1123
1124   ## 64-bit Base address of the NV variable range in flash device.
1125   # @Prompt 64-bit Base address of flash NV variable range.
1126   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
1127
1128   ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1129   # @Prompt 64-bit Base address of flash FTW spare block range.
1130   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
1131
1132   ## 64-bit Base address of the FTW working block range in flash device.
1133   # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1134   # @Prompt 64-bit Base address of flash FTW working block range.
1135   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
1136
1137   ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
1138   #  The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
1139   # @Prompt Reserved memory range for EMU variable NV storage.
1140   gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
1141
1142   ## This PCD defines the times to print hello world string.
1143   #  This PCD is a sample to explain UINT32 PCD usage.
1144   # @Prompt HellowWorld print times.
1145   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
1146
1147   ## This PCD defines the HelloWorld print string.
1148   #  This PCD is a sample to explain String typed PCD usage.
1149   # @Prompt HelloWorld print string.
1150   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
1151
1152   ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
1153   #  The default max size is 100MB (0x6400000) for more than one large capsule images.
1154   # @Prompt Max size of populated capsule.
1155   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
1156
1157   ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
1158   #  The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
1159   # @Prompt Max size of non-populated capsule.
1160   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
1161
1162   ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
1163   # @Prompt Firmware vendor.
1164   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
1165
1166   ## Firmware revision that is the default revision filled into the EFI System Table.
1167   # @Prompt Firmware revision.
1168   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
1169
1170   ## Null-terminated Unicode string that describes the firmware version.
1171   # @Prompt Firmware version string.
1172   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
1173
1174   ## Null-terminated Unicode string that contains the date the firmware was released
1175   # @Prompt Firmware release data string.
1176   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
1177
1178   ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
1179   #  (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
1180   #  The default value in PeiPhase is 1 KBytes.<BR>
1181   #  The default value in DxePhase is 128 KBytes.<BR>
1182   # @Prompt StatusCode memory size.
1183   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
1184
1185   ## Indicates if to reset system when memory type information changes.<BR><BR>
1186   #   TRUE  - Resets system when memory type information changes.<BR>
1187   #   FALSE - Does not reset system when memory type information changes.<BR>
1188   # @Prompt Reset on memory type information change.
1189   gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
1190
1191   ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
1192   #  Only following values defined in UEFI specification are valid:<BR><BR>
1193   #  0x00 (EFI_BLACK)<BR>
1194   #  0x01 (EFI_BLUE)<BR>
1195   #  0x02 (EFI_GREEN)<BR>
1196   #  0x03 (EFI_CYAN)<BR>
1197   #  0x04 (EFI_RED)<BR>
1198   #  0x05 (EFI_MAGENTA)<BR>
1199   #  0x06 (EFI_BROWN)<BR>
1200   #  0x07 (EFI_LIGHTGRAY)<BR>
1201   #  0x08 (EFI_DARKGRAY)<BR>
1202   #  0x09 (EFI_LIGHTBLUE)<BR>
1203   #  0x0A (EFI_LIGHTGREEN)<BR>
1204   #  0x0B (EFI_LIGHTCYAN)<BR>
1205   #  0x0C (EFI_LIGHTRED)<BR>
1206   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1207   #  0x0E (EFI_YELLOW)<BR>
1208   #  0x0F (EFI_WHITE)<BR>
1209   # @Prompt Foreground color for browser subtile.
1210   # @ValidRange 0x80000004 | 0x00 - 0x0F
1211   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
1212
1213   ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
1214   #  Only following values defined in UEFI specification are valid:<BR><BR>
1215   #  0x00 (EFI_BLACK)<BR>
1216   #  0x01 (EFI_BLUE)<BR>
1217   #  0x02 (EFI_GREEN)<BR>
1218   #  0x03 (EFI_CYAN)<BR>
1219   #  0x04 (EFI_RED)<BR>
1220   #  0x05 (EFI_MAGENTA)<BR>
1221   #  0x06 (EFI_BROWN)<BR>
1222   #  0x07 (EFI_LIGHTGRAY)<BR>
1223   #  0x08 (EFI_DARKGRAY)<BR>
1224   #  0x09 (EFI_LIGHTBLUE)<BR>
1225   #  0x0A (EFI_LIGHTGREEN)<BR>
1226   #  0x0B (EFI_LIGHTCYAN)<BR>
1227   #  0x0C (EFI_LIGHTRED)<BR>
1228   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1229   #  0x0E (EFI_YELLOW)<BR>
1230   #  0x0F (EFI_WHITE)<BR>
1231   # @Prompt Foreground color for browser field.
1232   # @ValidRange 0x80000004 | 0x00 - 0x0F
1233   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
1234
1235   ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
1236   #  The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
1237   #  0x00 (EFI_BLACK)<BR>
1238   #  0x01 (EFI_BLUE)<BR>
1239   #  0x02 (EFI_GREEN)<BR>
1240   #  0x03 (EFI_CYAN)<BR>
1241   #  0x04 (EFI_RED)<BR>
1242   #  0x05 (EFI_MAGENTA)<BR>
1243   #  0x06 (EFI_BROWN)<BR>
1244   #  0x07 (EFI_LIGHTGRAY)<BR>
1245   #  0x08 (EFI_DARKGRAY)<BR>
1246   #  0x09 (EFI_LIGHTBLUE)<BR>
1247   #  0x0A (EFI_LIGHTGREEN)<BR>
1248   #  0x0B (EFI_LIGHTCYAN)<BR>
1249   #  0x0C (EFI_LIGHTRED)<BR>
1250   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1251   #  0x0E (EFI_YELLOW)<BR>
1252   #  0x0F (EFI_WHITE)<BR>
1253   # @Prompt Foreground color for highlighted browser field.
1254   # @ValidRange 0x80000004 | 0x00 - 0x0F
1255   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
1256
1257   ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
1258   #  The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
1259   #  0x00 (EFI_BACKGROUND_BLACK)<BR>
1260   #  0x10 (EFI_BACKGROUND_BLUE)<BR>
1261   #  0x20 (EFI_BACKGROUND_GREEN)<BR>
1262   #  0x30 (EFI_BACKGROUND_CYAN)<BR>
1263   #  0x40 (EFI_BACKGROUND_RED)<BR>
1264   #  0x50 (EFI_BACKGROUND_MAGENTA)<BR>
1265   #  0x60 (EFI_BACKGROUND_BROWN)<BR>
1266   #  0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
1267   # @Prompt Background color for highlighted browser field.
1268   # @ValidList  0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
1269   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
1270
1271   ## Time in second to delay for SATA devices to spin-up for recovery.
1272   # @Prompt SATA spin-up delay time in second for recovery path.
1273   gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
1274
1275   ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
1276   #  to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
1277   #  When changing the value of this PCD, the platform developer should make sure the memory size is
1278   #  large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
1279   # @Prompt Reserved page number for S3 Boot Script Runtime Table.
1280   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
1281
1282   ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
1283   #  The default size is 32K. When changing the value of this PCD, the platform developer should
1284   #  make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
1285   # @Prompt Stack size for CapsulePei transfer to long mode.
1286   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
1287
1288   ## Indicates if 1G page table will be enabled.<BR><BR>
1289   #   TRUE  - 1G page table will be enabled.<BR>
1290   #   FALSE - 1G page table will not be enabled.<BR>
1291   # @Prompt Enable 1G page table support.
1292   gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
1293
1294   ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
1295   #   TRUE  - Single Root I/O virtualization is supported.<BR>
1296   #   FALSE - Single Root I/O virtualization is not supported.<BR>
1297   # @Prompt Enable SRIOV support.
1298   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
1299
1300   ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
1301   #   TRUE  - Alternative Routing-ID is supported.<BR>
1302   #   FALSE - Alternative Routing-ID is not supported.<BR>
1303   # @Prompt Enable ARI support.
1304   gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
1305
1306   ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
1307   #   TRUE  - Multi Root I/O virtualization is supported.<BR>
1308   #   FALSE - Multi Root I/O virtualization is not supported.<BR>
1309   # @Prompt Enable MRIOV support.
1310   gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
1311
1312   ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
1313   #  BITN set indicates 2 of n+12 power<BR>
1314   #  BIT0 set indicates 4KB alignment<BR>
1315   #  BIT1 set indicates 8KB alignment<BR>
1316   # @Prompt SRIOV system page size.
1317   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
1318
1319   ## SMBIOS version.
1320   # @Prompt SMBIOS version.
1321   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055
1322
1323   ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1324   # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1325   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A
1326
1327   ## SMBIOS produce method.
1328   #  BIT0 set indicates 32-bit entry point and table are produced.<BR>
1329   #  BIT1 set indicates 64-bit entry point and table are produced.<BR>
1330   # @Prompt The policy to produce SMBIOS entry point and table.
1331   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
1332
1333   ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
1334   #  the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
1335   # @Prompt Pad size for extension FPDT boot records.
1336   gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
1337
1338   ## Indicates if ConIn device are connected on demand.<BR><BR>
1339   #   TRUE  - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
1340   #           by Consplitter should be called before any real key read operation.<BR>
1341   #   FALSE - ConIn device may be connected normally during BDS.<BR>
1342   # @Prompt ConIn connect on demand.
1343   gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
1344
1345   ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
1346   #   TRUE  - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
1347   #   FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
1348   # @Prompt Enable ATA S.M.A.R.T feature.
1349   gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
1350
1351   ## Indicates if full PCI enumeration is disabled.<BR><BR>
1352   #   TRUE  - Full PCI enumeration is disabled.<BR>
1353   #   FALSE - Full PCI enumeration is not disabled.<BR>
1354   # @Prompt Disable full PCI enumeration.
1355   gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
1356
1357   ## Disk I/O - Number of Data Buffer block.
1358   # Define the size in block of the pre-allocated buffer. It provide better
1359   # performance for large Disk I/O requests.
1360   # @Prompt Disk I/O - Number of Data Buffer block.
1361   gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
1362
1363   ## This PCD specifies the PCI-based UFS host controller mmio base address.
1364   # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
1365   # host controllers, their mmio base addresses are calculated one by one from this base address.
1366   # @Prompt Mmio base address of pci-based UFS host controller.
1367   gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
1368
1369   ## Specify Max ESRT cache entry number supported for FMP instances
1370   #
1371   # @Prompt Max FMP ESRT entry number to be synced & cached in repository.
1372   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
1373
1374   ## Specify Max ESRT cache entry number supported for Non FMP instances
1375   #
1376   # @Prompt Max Non-FMP ESRT entry number to be cached in repository.
1377   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
1378
1379   ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
1380   #
1381   # @Prompt Flag to request system reboot after processing capsule.
1382   gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
1383
1384   ## Publish PropertiesTable or not.
1385   #
1386   # If this PCD is TRUE, DxeCore publishs PropertiesTable.
1387   # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
1388   # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
1389   # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
1390   # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
1391   #
1392   # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
1393   #   1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
1394   #      use EfiRuntimeServicesData for runtime driver PE image header and other section.
1395   #   2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
1396   #   3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
1397   #   4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
1398   #
1399   # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
1400   # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
1401   # section. If PE code/data sections are merged, the result is unpredictable.
1402   #
1403   # @Prompt Publish UEFI PropertiesTable.
1404   gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|TRUE|BOOLEAN|0x0000006e
1405
1406   ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
1407   # @Prompt Default OEM ID for ACPI table creation.
1408   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
1409
1410   ## Default OEM Table ID for ACPI table creation, it is "EDK2    ".
1411   # @Prompt Default OEM Table ID for ACPI table creation.
1412   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
1413
1414   ## Default OEM Revision for ACPI table creation.
1415   # @Prompt Default OEM Revision for ACPI table creation.
1416   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
1417
1418   ## Default Creator ID for ACPI table creation.
1419   # @Prompt Default Creator ID for ACPI table creation.
1420   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
1421
1422   ## Default Creator Revision for ACPI table creation.
1423   # @Prompt Default Creator Revision for ACPI table creation.
1424   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
1425
1426   ## Indicates if to set NX for stack.<BR><BR>
1427   #  For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
1428   #  For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
1429   #  IA32 PAE is supported and Execute Disable Bit is available.<BR>
1430   #   TRUE  - to set NX for stack.<BR>
1431   #   FALSE - Not to set NX for stack.<BR>
1432   # @Prompt Set NX for stack.
1433   gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
1434
1435 [PcdsPatchableInModule]
1436   ## Specify memory size with page number for PEI code when
1437   #  Loading Module at Fixed Address feature is enabled.
1438   #  The value will be set by the build tool.
1439   # @Prompt LMFA PEI code page number.
1440   # @ValidList  0x80000001 | 0
1441   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
1442
1443   ## Specify memory size with page number for DXE boot time code when
1444   #  Loading Module at Fixed Address feature is enabled.
1445   #  The value will be set by the build tool.
1446   # @Prompt LMFA DXE boot code page number.
1447   # @ValidList  0x80000001 | 0
1448   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
1449
1450   ## Specify memory size with page number for DXE runtime code when
1451   #  Loading Module at Fixed Address feature is enabled.
1452   #  The value will be set by the build tool.
1453   # @Prompt LMFA DXE runtime code page number.
1454   # @ValidList  0x80000001 | 0
1455   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
1456
1457   ## Specify memory size with page number for SMM code when
1458   #  Loading Module at Fixed Address feature is enabled.
1459   #  The value will be set by the build tool.
1460   # @Prompt LMFA SMM code page number.
1461   # @ValidList  0x80000001 | 0
1462   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
1463
1464 [PcdsDynamic, PcdsDynamicEx]
1465   ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
1466   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1467   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1468   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1469   # @Prompt S3 Boot Script Table Private Data pointer.
1470   # @ValidList  0x80000001 | 0x0
1471   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
1472
1473   ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
1474   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1475   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1476   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1477   # @Prompt S3 Boot Script Table Private Smm Data pointer.
1478   # @ValidList  0x80000001 | 0x0
1479   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
1480
1481   ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
1482   #  Virtual to Physical mapping according to the processor physical address bits.
1483   # @Prompt Identify Mapping Page Table pointer.
1484   # @ValidList  0x80000001 | 0x0
1485   gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
1486
1487 [UserExtensions.TianoCore."ExtraFiles"]
1488   MdeModulePkgExtra.uni