Move MdeModuleHii.h into Include\Guid directory

[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec

##  @file  MdeModulePkg.dec
#
# This package provides the modules that conform to EFI/PI Industry standards.
# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) 
# and libraries instances, which are used for those modules.
#
# Copyright (c) 2007 - 2008, Intel Corporation.
#
# All rights reserved.
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License which accompanies this distribution.
# The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##


[Defines]
  DEC_SPECIFICATION              = 0x00010005
  PACKAGE_NAME                   = MdeModulePkg
  PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  PACKAGE_VERSION                = 0.1

[Includes.common]
  Include


[LibraryClasses.common]
  ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  IpIoLib|Include/Library/IpIoLib.h
  
  ##  @libraryclass  Basic function for UEFI network stack.
  NetLib|Include/Library/NetLib.h

  ##  @libraryclass  Defines a set of methods to reset whole system.
  ResetSystemLib|Include/Library/ResetSystemLib.h
  
  ##  @libraryclass  The helper routines to access UDP service.
  UdpIoLib|Include/Library/UdpIoLib.h
  
  ##  @libraryclass  Defines a set of methods related do S3 mode.
  S3Lib|Include/Library/S3Lib.h
  
  ##  @libraryclass  Defines a set of methods related recovery mode.
  RecoveryLib|Include/Library/RecoveryLib.h
  
  ##  @libraryclass  Basic platform driver override functions.
  PlatDriOverLib|Include/Library/PlatDriOverLib.h

  ##  @libraryclass  Provides HII related functions.
  HiiLib|Include/Library/HiiLib.h

  ##  @libraryclass  Provides a set of interfaces to do IFR opcode creation and interact with a UEFI Form Browser.
  IfrSupportLib|Include/Library/IfrSupportLib.h
  
  ##  @libraryclass  Includes two extended HII functions to create and destory Hii Package 
  #                  by create the virtual Driver Handle.
  ##
  ExtendedHiiLib|Include/Library/ExtendedHiiLib.h
  
  ##  @libraryclass  Defines APIs that is related to IFR operations but specific to EDK II
  #                  implementation.
  ##
  ExtendedIfrSupportLib|Include/Library/ExtendedIfrSupportLib.h
  
  ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  CapsuleLib|Include/Library/CapsuleLib.h
  
  ##  @libraryclass  Platform BDS library definition about platform specific behavior.
  PlatformBdsLib|Include/Library/PlatformBdsLib.h
  
  ##  @libraryclass  Generic BDS library definition, include the data structure and function.
  GenericBdsLib|Include/Library/GenericBdsLib.h
  
  ##  @libraryclass  Library for Deferred Procedure Calls.
  DpcLib|Include/Library/DpcLib.h

  ##  @libraryclass  Provides all FVB runtime services defined in PI specification FVB protocol to provide
  #                  low level control interfaces over block-oriented firmware devices.
  ##
  FvbServiceLib|Include/Library/FvbServiceLib.h

[Guids.common]
  ## MdeModule package token space guid
  ## Include/Guid/MdeModulePkgTokenSpace.h
  gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}

  ## Hob guid for Pcd DataBase
  ## Include/Guid/PcdDataBaseHobGuid.h
  gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
  
  ## Hob guid for Pcd Pei Callback Function Table
  ## Include/Guid/PcdPeiCallbackFnTableHobGuid.h
  gPcdPeiCallbackFnTableHobGuid  = { 0xC625F4B2, 0xEA09, 0x4675, { 0x82, 0xD7, 0xBA, 0x36, 0x82, 0x15, 0x7A, 0x14 }}

  ## Guid for EDKII implementation GUIDed opcodes
  gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
  
  ## Guid for Framework vfr GUIDed opcodes.
  gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
  
  ## Guid to specify the System Non Volatile FV
  ## Include/Guid/SystemNvDataGuid.h
  gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
  
  ## Hob guid for the System Non Volatile HOB entries in the HOB list
  ## Include/Guid/SystemNvDataGuid.h
  gEfiSystemNvDataHobGuid        = { 0xD6E5092D, 0xC7B2, 0x4872, { 0xAF, 0x66, 0xFD, 0xC0, 0xE6, 0xF9, 0x5E, 0x78 }}
  
  ## Guid for EFI_DISK_INFO_PROTOCOL.Interface to specify Usb interface.
  ## Include/Protocol/DiskInfo.h
  gEfiDiskInfoUsbInterfaceGuid   = { 0xCB871572, 0xC11A, 0x47B5, { 0xB4, 0x92, 0x67, 0x5E, 0xAF, 0xA7, 0x77, 0x27 }}
  
  ## Guid for EFI_DISK_INFO_PROTOCOL.Interface to specify Scsi interface.
  ## Include/Protocol/DiskInfo.h
  gEfiDiskInfoScsiInterfaceGuid  = { 0x08F74BAA, 0xEA36, 0x41D9, { 0x95, 0x21, 0x21, 0xA7, 0x0F, 0x87, 0x80, 0xBC }}
  
  ## Guid for EFI_DISK_INFO_PROTOCOL.Interface to specify Ide interface.
  ## Include/Protocol/DiskInfo.h
  gEfiDiskInfoIdeInterfaceGuid   = { 0x5E948FE3, 0x26D3, 0x42B5, { 0xAF, 0x17, 0x61, 0x02, 0x87, 0x18, 0x8D, 0xEC }}
  
  ## Guid for EFI_DISK_INFO_PROTOCOL.Interface to specify Ahci interface.
  ## Include/Protocol/DiskInfo.h
  gEfiDiskInfoAhciInterfaceGuid  = { 0x9e498932, 0x4abc, 0x45af, { 0xa3, 0x4d, 0x02, 0x47, 0x78, 0x7b, 0xe7, 0xc6 }}
  
  ## Alternate Firmware Volume Block Guid specify that the additional 
  #  FVB protocol is installed into FVB handle
  ## Include/Guid/AlternateFvBlock.h
  gEfiAlternateFvBlockGuid       = { 0xF496922D, 0x172F, 0x4BBC, { 0xA1, 0xEB, 0x0E, 0xEB, 0x94, 0x9C, 0x34, 0x86 }}
  
  ## Guid specify the device is the console out device.
  ## Include/Guid/ConsoleOutDevice.h
  gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}

  ## Guid specify the device is the console in device.
  ## Include/Guid/ConsoleInDevice.h
  gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
  
  ## Guid specify the primary console out device.
  ## Include/Guid/PrimaryConsoleOutDevice.h
  gEfiPrimaryConsoleOutDeviceGuid = { 0x62BDF38A, 0xE3D5, 0x492C, { 0x95, 0x0C, 0x23, 0xA7, 0xF6, 0x6E, 0x67, 0x2E }}
  
  ## Guid specify the primary console in device.
  ## Include/Guid/PrimaryConsoleInDevice.h
  gEfiPrimaryConsoleInDeviceGuid = { 0xE451DCBE, 0x96A1, 0x4729, { 0xA5, 0xCF, 0x6B, 0x9C, 0x2C, 0xFF, 0x47, 0xFD }}
  
  ## Guid specify the primary StdErr device.
  ## Include/Guid/PrimaryStandardErrorDevice.h
  gEfiPrimaryStandardErrorDeviceGuid = { 0x5A68191B, 0x9B97, 0x4752, { 0x99, 0x46, 0xE3, 0x6A, 0x5D, 0xA9, 0x42, 0xB1 }}
  
  ## Guid specify the default BMP logo file.
  ## Include/Guid/Bmp.h
  gEfiDefaultBmpLogoGuid         = { 0x7BB28B99, 0x61BB, 0x11D5, { 0x9A, 0x5D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
  
  ## Variale guid specify boot state.
  ## Include/Guid/BootState.h
  gEfiBootStateGuid              = { 0x60B5E939, 0x0FCF, 0x4227, { 0xBA, 0x83, 0x6B, 0xBE, 0xD4, 0x5B, 0xC0, 0xE3 }}
  
  ## Hob and Variable guid specify the platform memory type information.
  ## Include/Guid/MemoryTypeInformation.h
  gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
  
  ## Capsule update hob and variable guid
  ## Include/Guid/CapsuleVendor.h
  gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
  
  ## Guid specify the Shell application.
  ## Include/Guid/ShellFile.h
  gEfiShellFileGuid              = { 0xC57AD6B7, 0x0515, 0x40A8, { 0x9D, 0x21, 0x55, 0x16, 0x52, 0x85, 0x4E, 0x37 }}
  
  ## Guid specifiy the device is the StdErr device.
  ## Include/Guid/StandardErrorDevice.h
  gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
  
  ## PeCoffLoader guid for PeCoffLoader entry in the HOB list.
  ## Include/Guid/PeiPeCoffLoader.h
  gEfiPeiPeCoffLoaderGuid        = { 0xD8117CFF, 0x94A6, 0x11D4, { 0x9A, 0x3A, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
  
  ## Guid specify the variable list entries put in the EFI system table.
  ## Include/Guid/VariableInfo.h
  gEfiVariableInfoGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
  
  ## Platform Override Variable guid
  ## Include/Guid/OverrideVariable.h
  gEfiOverrideVariableGuid       = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }}
  
  ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
  ## Include/Guid/Performance.h
  gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}

[Protocols.common] 
  ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
  ## Include/Protocol/LoadPe32Image.h
  gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
  
  ## Print protocol defines six basic print functions to print the format unicode and ascii string.
  ## Include/Protocol/Print2.h
  gEfiPrint2ProtocolGuid          = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}

  ## This protocol defines the generic memory test interfaces in Dxe phase.
  ## Include/Protocol/GenericMemoryTest.h
  gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
  
  ## Disk Info protocol is used to export Inquiry Data for a drive.
  ## Include/Protocol/DiskInfo.h
  gEfiDiskInfoProtocolGuid       = { 0xD432A67F, 0x14DC, 0x484B, { 0xB3, 0xBB, 0x3F, 0x02, 0x91, 0x84, 0x93, 0x27 }}
  
  ## This protocol provides an extended service to erase the specified range of a firmware volume block.
  ## Include/Protocol/FvbExtension.h
  gEfiFvbExtensionProtocolGuid   = { 0x53A4C71B, 0xB581, 0x4170, { 0x91, 0xB3, 0x8D, 0xB8, 0x7A, 0x4B, 0x5C, 0x46 }}
  
  ## Fault tolerant write lite protocol defines only one interface to write 
  #  the buffer to the fault tolerant storage.
  ## Include/Protocol/FaultTolerantWriteLite.h
  gEfiFaultTolerantWriteLiteProtocolGuid = { 0x3F557189, 0x8DAE, 0x45AE, { 0xA0, 0xB3, 0x2B, 0x99, 0xCA, 0x7A, 0xA7, 0xA0 }}
  
  ## This protocol provides the interfaces to Get/Set the current video mode for GOP/UGA screen
  ## Include/Protocol/ConsoleControl.h
  gEfiConsoleControlProtocolGuid = { 0xF42F7782, 0x012E, 0x4C12, { 0x99, 0x56, 0x49, 0xF9, 0x43, 0x04, 0xF7, 0x21 }}
  
  ## OEM Badging Protocol defines the interface to get the OEM badging image with the dispaly attribute.
  ## Include/Protocol/OEMBadging.h
  gEfiOEMBadgingProtocolGuid     = { 0x170E13C0, 0xBF1B, 0x4218, { 0x87, 0x1D, 0x2A, 0xBD, 0xC6, 0xF8, 0x87, 0xBC }}
  
  ## Protocol guid is defined for CRC32 encapsulation scheme.
  ## Include/Protocol/Crc32GuidedSectionExtraction.h
  gEfiCrc32GuidedSectionExtractionProtocolGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
  
  ## Include/Protocol/NicIp4Config.h
  gEfiNicIp4ConfigProtocolGuid   = {0xdca3d4d, 0x12da, 0x4728,  { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 }}
  
  ## Include/Protocol/NicIp4Config.h
  gEfiNicIp4ConfigVariableGuid   = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
  
  ## Include/Protocol/Tcp.h
  gEfiTcpProtocolGuid            = {0x02b3d5f2, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d }}
  
  ## Include/Protocol/PxeDhcp4CallBack.h
  gEfiPxeDhcp4CallbackProtocolGuid = {0xc1544c01, 0x92a4, 0x4198, {0x8a, 0x84, 0x77, 0x85, 0x83, 0xc2, 0x36, 0x21 }}
  
  ## Include/Protocol/PxeDhcp4.h
  gEfiPxeDhcp4ProtocolGuid       = {0x03c4e624, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x29, 0x3f, 0xc1, 0x4d }}
  
  ## Include/Protocol/Dpc.h
  gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
  
  ## Tcg addtional services to measure PeImage and ActionString.
  ## Include/Protocol/TcgPlatform.h
  gEfiTcgPlatformProtocolGuid    = { 0x8c4c9a41, 0xbf56, 0x4627, { 0x9e, 0xa, 0xc8, 0x38, 0x6d, 0x66, 0x11, 0x5c }}
  
  ## Protocol Guid specify the Simple TextIn Notify handle.
  ## Include/Protocol/SimpleTextInExNotify.h
  gSimpleTextInExNotifyGuid      = { 0x856f2def, 0x4e93, 0x4d6b, { 0x94, 0xce, 0x1c, 0xfe, 0x47, 0x01, 0x3e, 0xa5 }}  

[PcdsFeatureFlag.common]
  ## Indicate whether platform can support update capsule across a system reset
  gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
  
  ## This feature flag can be used to enable or disable the Pcd PEIM database 
  #  traverse capability. Disable it can reduce the size of final image generated.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseTraverseEnabled|TRUE|BOOLEAN|0x00010020
  
  ## This feature flag can be used to enable or disable the Pcd DXE database 
  #  traverse capability. Disable it can reduce the size of final image generated.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDxePcdDatabaseTraverseEnabled|TRUE|BOOLEAN|0x00010021
  
  ## This feature flag can be used to enable or disable the SET capability of PCD service PEIM.
  #  If a platform does not do PCD SET operation in PEI phase. This flag can be set to DISABLE to save size.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseSetEnabled|TRUE|BOOLEAN|0x00010030
  
  ## This feature flag can be used to enable or disable the GET size capability of PCD service PEIM.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseGetSizeEnabled|TRUE|BOOLEAN|0x00010031
  
  ## This feature flag can be used to enable or disable the Callback On SET capability of PCD service PEIM. 
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseCallbackOnSetEnabled|TRUE|BOOLEAN|0x00010032
  
  ## This feature flag can be used to enable or disable the PCD service PEIM to handle DynamicEX PCD. 
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseExEnabled|TRUE|BOOLEAN|0x00010033
 
  ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
  #  It can be disabled to save size.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
  
  ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
  #  It can be disabled to save size.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
    
  ## If this PCD is set as TRUE, the code specific to NT emulator will be enabled.
  gEfiMdeModulePkgTokenSpaceGuid.PcdNtEmulatorEnable|FALSE|BOOLEAN|0x0001003e
  
  ## If TRUE, track statistical information about variable usage stored in the EFI system table.
  gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
  
  ## If TRUE, Unicode Collation Protocol will be installed.
  gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
  
  ## If TRUE, Unicode Collation 2 Protocol will be installed.
  gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
  
  ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
  #  It could be set FALSE to save size.
  gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
  
  ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
  #  It could be set FALSE to save size.
  gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
  
  ## If TRUE, TE image will first be searched in PeiCore dispatcher. 
  #  If FALSE, PE image will first be searched.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
  
  ## If PcdSupportHardwareErrorRecord is TRUE, support hardware error record via variable in BDS.
  gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHardwareErrorRecord|FALSE|BOOLEAN|0x00010045
  
  ## If TRUE, Robustnesss improvement such as for DUET. Default is not required.
  gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047

  ## If TRUE, HiiImageProtocol will be installed.
  #  FALSE is for size reduction.
  gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
  
  ## If TRUE, Full UEFI Config Routing Protocol will be installed.
  #  FALSE is for size reduction.
  gEfiMdeModulePkgTokenSpaceGuid.PcdSupportFullConfigRoutingProtocol|TRUE|BOOLEAN|0x00010101
  
  ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
  #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
  #  from HII database.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200

  ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. 
  #  This is used to provide backward compatibility support to Framework HII module built togehter EdkCompatbilityPkg.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkHiiCompatibilitySupport|TRUE|BOOLEAN|0x00012008
  
  ## If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkFvHobCompatibilitySupport|FALSE|BOOLEAN|0x00012009
  
  ##
  #  If TRUE, HelloWorld Application will print the verbose information.
  #  This PCD is a sample to explain FeatureFlag PCD usage.
  ##
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a

[PcdsFixedAtBuild.common]
  ## Dynamic type PCD can be registered callback function for Pcd setting action.
  #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
  #  for a dynamic PCD used in PEI phase.
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f

  ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
  #  to store PCD value. 
  #
  gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
  
  ## Indicate the max size of the populated image that the platform can support.
  #  To support the multi populated images, the defautl supported size will 
  #  be enlarged to 100MB that is 10 times of the single non-populated image.
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
  
  ## Indicate the max size of the non-populated image that the platform can support.
  #  The default size is 10MB for the casule image without populated flag setting.
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
  
  ## Maximun number of performance log entries during PEI phase.
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
  
  ## Maximum number of FV is supported by PeiCore's dispatching.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030

  ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031

  ## Maximum stack size for PeiCore.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032

  ## Maximum PPI count is supported by PeiCore's PPI database.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
  
  ## RTC Update Timeout Value
  gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
  
  ## Base address of the NV variable range in flash device.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
  
  ## Size of the NV variable range.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
  
  ## Maximum buffer for the single variable.
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
  
  ## Maximum buffer for Hardware error record variable.
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
  
  ## Maximum buffer for the total variable store.
  gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
  
  ## Base address of the FTW spare block range in flash device.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
  
  ## Size of the FTW spare block range.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
  
  ## Base address of the FTW working block range in flash device.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
  
  ## Size of the FTW working block range.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011

  ## Default timeout value for displaying progressing bar in before boot OS.
  #  This value can be changed in BDS.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001

  ## Error level for hardware recorder.
  gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002
  
  ##
  #  This PCD defines the print string.
  #  This PCD is a sample to explain FixedAtBuild String PCD usage.
  ##
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004

  ##
  #  This PCD defines the times to print hello world string.
  #  This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
  ##
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005

[PcdsFixedAtBuild.IA32]
  ## Default EFI boot path name for IA32 architecture, this path is relative to 
  #  EFI boot disk.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTIA32.EFI"|VOID*|0x40000003

[PcdsFixedAtBuild.X64]
  ## Default EFI boot path name for X64 architecture, this path is relative to 
  #  EFI boot disk.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTX64.EFI"|VOID*|0x40000003

[PcdsFixedAtBuild.IPF]
  ## Default EFI boot path name for IPF architecture, this path is relative to 
  #  EFI boot disk.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTIA64.EFI"|VOID*|0x40000003

[PcdsFixedAtBuild.EBC]
  ## Default EFI boot path name for EBC architecture, this path is relative to 
  #  EFI boot disk.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTEBC.EFI"|VOID*|0x40000003
  
[PcdsDynamic.common]
  ## Base address of the NV variable range in flash device 
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
  
  ## Size of the NV variable range.  
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002

  ## Base address of the FTW spare block range in flash device.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013

  ## Size of the FTW spare block range.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014

  ## Base address of the FTW working block range in flash device.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010

  ## Size of the FTW working block range.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011

  ## Default timeout value for displaying progressing bar in before boot OS.
  #  This value can be changed in BDS.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001

  ## Error level for hardware recorder.
  gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002

  ##
  #  This PCD defines the print string.
  #  This PCD is a sample to explain Dynamic PCD usage.
  ##
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004

  ##
  #  This PCD defines the times to print hello world string.
  #  This PCD is a sample to explain Dynamic UINT32 PCD usage.
  ##
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005

  ##
  #  This PCD defines the Console output column and the default value is 25 according to UEFI spec
  ##
  gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
  
  ##
  #  This PCD defines the Console output row and the default value is 80 according to UEFI spec
  ##
  gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007

[PcdsPatchableInModule.common]
  ## Maximun number of performance log entries during PEI phase.
  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f

  ## Base address of the NV variable range in flash device 
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
  
  ## Size of the NV variable range.  
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002

  ## Base address of the FTW spare block range in flash device.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013

  ## Size of the FTW spare block range.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014

  ## Base address of the FTW working block range in flash device.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010

  ## Size of the FTW working block range.
  gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011

  ## Default timeout value for displaying progressing bar in before boot OS.
  #  This value can be changed in BDS.
  gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001

  ## Error level for hardware recorder.
  gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002

  ##
  #  This PCD defines the times to print hello world string.
  #  This PCD is a sample to explain Patchable UINT32 PCD usage.
  ##
  gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005

[PcdsFeatureFlag.IA32]
  ## If TRUE, the DXE IPL will load a 64-bit DxeCore.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
  
  ## If TRUE, the DXE IPL will create the default IDT table.
  gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplEnableIdt|TRUE|BOOLEAN|0x0001003d