MdeModulePkg/MdeModulePkg.dec

   1 ## @file  MdeModulePkg.dec
   2 # This package provides the modules that conform to UEFI/PI Industry standards.
   3 # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
   4 # and libraries instances, which are used for those modules.
   5 #
   6 # Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>
   7 # Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
   8 # This program and the accompanying materials are licensed and made available under
   9 # the terms and conditions of the BSD License that accompanies this distribution.
  10 # The full text of the license may be found at
  11 # http://opensource.org/licenses/bsd-license.php.
  12 #
  13 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  15 #
  16 ##
  17
  18
  19 [Defines]
  20   DEC_SPECIFICATION              = 0x00010005
  21   PACKAGE_NAME                   = MdeModulePkg
  22   PACKAGE_UNI_FILE               = MdeModulePkg.uni
  23   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  24   PACKAGE_VERSION                = 0.96
  25
  26 [Includes]
  27   Include
  28
  29
  30 [LibraryClasses]
  31   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  32   #   This library is only intended to be used by UEFI network stack modules.
  33   IpIoLib|Include/Library/IpIoLib.h
  34
  35   ##  @libraryclass  Basic function for UEFI network stack.
  36   #   This library is only intended to be used by UEFI network stack modules.
  37   NetLib|Include/Library/NetLib.h
  38
  39   ##  @libraryclass  The helper routines to access UDP service.
  40   #   This library is only intended to be used by UEFI network stack modules.
  41   UdpIoLib|Include/Library/UdpIoLib.h
  42
  43   ##  @libraryclass  The helper routines to access TCP service.
  44   #   This library is only intended to be used by UEFI network stack modules.
  45   TcpIoLib|Include/Library/TcpIoLib.h
  46
  47   ##  @libraryclass  The helper routines to access HTTP service.
  48   #   This library is only intended to be used by UEFI network stack modules.
  49   HttpLib|Include/Library/HttpLib.h
  50
  51   ##  @libraryclass  Defines a set of methods to reset whole system.
  52   ResetSystemLib|Include/Library/ResetSystemLib.h
  53
  54   ##  @libraryclass  Defines a set of methods related do S3 mode.
  55   #   This library class is no longer used and modules using this library should
  56   #   directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
  57   S3Lib|Include/Library/S3Lib.h
  58
  59   ##  @libraryclass  Defines a set of methods related recovery mode.
  60   #   This library class is no longer used and modules using this library should
  61   #   directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
  62   RecoveryLib|Include/Library/RecoveryLib.h
  63
  64   ##  @libraryclass  Provides HII related functions.
  65   HiiLib|Include/Library/HiiLib.h
  66
  67   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  68   CapsuleLib|Include/Library/CapsuleLib.h
  69
  70   ##  @libraryclass  Library for Deferred Procedure Calls.
  71   DpcLib|Include/Library/DpcLib.h
  72
  73   ##  @libraryclass    Provides global variables that are pointers
  74   #   to the UEFI HII related protocols.
  75   #
  76   UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
  77
  78   ##  @libraryclass    Provides a set of interfaces to abstract the policy of security measurement.
  79   #
  80   SecurityManagementLib|Include/Library/SecurityManagementLib.h
  81
  82   ##  @libraryclass  OEM status code libary is used to report status code to OEM device.
  83   #
  84   OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
  85
  86   ##  @libraryclass  Debug Agent is used to provide soft debug capability.
  87   #
  88   DebugAgentLib|Include/Library/DebugAgentLib.h
  89
  90   ##  @libraryclass  Provide platform specific hooks.
  91   #
  92   PlatformHookLib|Include/Library/PlatformHookLib.h
  93
  94   ##  @libraryclass  Provide platform specific hooks for SMM core.
  95   #
  96   SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
  97
  98   ##  @libraryclass  Provide capability to maintain the data integrity cross S3 phase.
  99   #
 100   LockBoxLib|Include/Library/LockBoxLib.h
 101
 102   ##  @libraryclass  Provide the CPU exception handler.
 103   #
 104   CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
 105
 106   ##  @libraryclass    Provides platform specific display interface.
 107   #
 108   CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
 109
 110   ## @libraryclass   Provides sorting functions
 111   SortLib|Include/Library/SortLib.h
 112
 113   ## @libraryclass   Provides core boot manager functions
 114   UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
 115
 116   ## @libraryclass   Provides core boot manager functions
 117   PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
 118
 119   ## @libraryclass  Provides common interfaces about TPM measurement for other modules.
 120   #
 121   TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
 122
 123   ## @libraryclass  Provides authenticated variable services.
 124   #
 125   AuthVariableLib|Include/Library/AuthVariableLib.h
 126
 127   ## @libraryclass  Provides variable check services and database management.
 128   #
 129   VarCheckLib|Include/Library/VarCheckLib.h
 130
 131   ## @libraryclass  Provides services to get variable error flag and do platform variable cleanup.
 132   #
 133   PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
 134
 135   ## @libraryclass  Provides services to get do the file explorer.
 136   #
 137   FileExplorerLib|Include/Library/FileExplorerLib.h
 138
 139   ## @libraryclass  Provides image decoding service.
 140   #
 141   ImageDecoderLib|Include/Library/ImageDecoderLib.h
 142
 143   ## @libraryclass  Provides interfaces about logo display.
 144   #
 145   BootLogoLib|Include/Library/BootLogoLib.h
 146
 147   ## @libraryclass  Provides interfaces about Ipmi submit generic commond.
 148   #
 149   IpmiLib|Include/Library/IpmiLib.h
 150
 151   ## @libraryclass  Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
 152   #
 153   PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
 154
 155 [Guids]
 156   ## MdeModule package token space guid
 157   # Include/Guid/MdeModulePkgTokenSpace.h
 158   gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
 159
 160   ## Hob guid for Pcd DataBase
 161   #  Include/Guid/PcdDataBaseHobGuid.h
 162   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
 163
 164   ## Guid for PCD DataBase signature.
 165   # Include/Guid/PcdDataBaseSignatureGuid.h
 166   gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
 167
 168   ## Guid for EDKII implementation GUIDed opcodes
 169   #  Include/Guid/MdeModuleHii.h
 170   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
 171
 172   ## Guid for Framework vfr GUIDed opcodes.
 173   #  Include/Guid/MdeModuleHii.h
 174   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
 175
 176   ## Guid to specify the System Non Volatile FV
 177   #  Include/Guid/SystemNvDataGuid.h
 178   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
 179
 180   ## GUID used as the signature of FTW working block header.
 181   #  Include/Guid/SystemNvDataGuid.h
 182   gEdkiiWorkingBlockSignatureGuid   = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65,  0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
 183
 184   ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
 185   #  Include/Guid/FaultTolerantWrite.h
 186   gEdkiiFaultTolerantWriteGuid      = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83,  0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
 187
 188   ## Guid specify the device is the console out device.
 189   #  Include/Guid/ConsoleOutDevice.h
 190   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 191
 192   ## Guid specify the device is the console in device.
 193   #  Include/Guid/ConsoleInDevice.h
 194   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 195
 196   ## Hob and Variable guid specify the platform memory type information.
 197   #  Include/Guid/MemoryTypeInformation.h
 198   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
 199
 200   ## Capsule update hob and variable guid
 201   #  Include/Guid/CapsuleVendor.h
 202   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
 203
 204   ## Guid specifiy the device is the StdErr device.
 205   #  Include/Guid/StandardErrorDevice.h
 206   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 207
 208   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
 209   #  Include/Guid/VariableFormat.h
 210   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
 211
 212   ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
 213   #  Include/Guid/AuthenticatedVariableFormat.h
 214   gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
 215
 216   #  Include/Guid/VariableIndexTable.h
 217   gEfiVariableIndexTableGuid  = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
 218
 219   ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
 220   #  Include/Guid/SmmVariableCommon.h
 221   gSmmVariableWriteGuid  = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
 222
 223   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
 224   #  Include/Guid/Performance.h
 225   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
 226   gSmmPerformanceProtocolGuid    = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa,  0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
 227   gPerformanceExProtocolGuid     = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1,  0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
 228   gSmmPerformanceExProtocolGuid  = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6,  0x30, 0xe3, 0xe,  0xe5 } }
 229
 230   ## Guid is defined for CRC32 encapsulation scheme.
 231   #  Include/Guid/Crc32GuidedSectionExtraction.h
 232   gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
 233
 234   ## Include/Guid/StatusCodeCallbackGuid.h
 235   gStatusCodeCallbackGuid   = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
 236
 237   ## GUID identifies status code records HOB that originate from the PEI status code
 238   #  Include/Guid/MemoryStatusCodeRecord.h
 239   gMemoryStatusCodeRecordGuid     = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
 240
 241   ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
 242   #  Include/Guid/StatusCodeDataTypeDebug.h
 243   gEfiStatusCodeDataTypeDebugGuid  = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
 244
 245   ##  A configuration Table Guid for Load module at fixed address
 246   #  Include/Guid/LoadModuleAtFixedAddress.h
 247   gLoadFixedAddressConfigurationTableGuid  = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
 248
 249   ## GUID used to store the global debug mask value into an EFI Variable
 250   # Include/Guid/DebugMask.h
 251   gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
 252
 253   ##  Event for the DXE Core to signal idle events
 254   #  Include/Guid/EventIdle.h
 255   gIdleLoopEventGuid  = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
 256
 257   ## Include/Guid/RecoveryDevice.h
 258   gRecoveryOnFatUsbDiskGuid          = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
 259
 260   ## Include/Guid/RecoveryDevice.h
 261   gRecoveryOnFatIdeDiskGuid          = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
 262
 263   ## Include/Guid/RecoveryDevice.h
 264   gRecoveryOnFatFloppyDiskGuid       = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
 265
 266   ## Include/Guid/RecoveryDevice.h
 267   gRecoveryOnDataCdGuid              = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
 268
 269   ## Include/Guid/SmmLockBox.h
 270   gEfiSmmLockBoxCommunicationGuid    = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
 271
 272   ## Include/Guid/AcpiS3Context.h
 273   gEfiAcpiVariableGuid               = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
 274
 275   ## Include/Guid/AcpiS3Context.h
 276   gEfiAcpiS3ContextGuid              = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
 277
 278   ## Include/Guid/BootScriptExecutorVariable.h
 279   gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
 280   gEfiBootScriptExecutorContextGuid  = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
 281
 282   ## Include/Guid/UsbKeyBoardLayout.h
 283   gUsbKeyboardLayoutPackageGuid      = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
 284   gUsbKeyboardLayoutKeyGuid          = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
 285
 286   ## Include/Guid/HiiResourceSampleHii.h
 287   gHiiResourceSamleFormSetGuid       = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
 288
 289   ## Include/Guid/DriverSampleHii.h
 290   gDriverSampleFormSetGuid           = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
 291   gDriverSampleInventoryGuid         = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
 292   gEfiIfrRefreshIdOpGuid             = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
 293
 294   ## Include/Guid/PlatDriOverrideHii.h
 295   gPlatformOverridesManagerGuid      = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
 296
 297   ## Include/Guid/Ip4Config2Hii.h
 298   gIp4Config2NvDataGuid              = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
 299
 300   ## Include/Guid/VlanConfigHii.h
 301   gVlanConfigFormSetGuid             = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
 302
 303   ## Include/Guid/Ip4IScsiConfigHii.h
 304   gIp4IScsiConfigGuid                = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
 305   gIScsiCHAPAuthInfoGuid             = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
 306
 307   ## Include/Guid/ZeroGuid.h
 308   gZeroGuid                          = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
 309
 310   ## Include/Guid/MtcVendor.h
 311   gMtcVendorGuid                     = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
 312
 313   ## Guid for Firmware Performance Data Table (FPDT) implementation.
 314   #  Include/Guid/FirmwarePerformance.h
 315   gEfiFirmwarePerformanceGuid        = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
 316   gFirmwarePerformanceS3PointerGuid  = { 0xdc65adc,  0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
 317
 318   ## Include/Guid/ExitBootServiceFailed.h
 319   gEventExitBootServicesFailedGuid   = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
 320
 321   ## Include/Guid/ConnectConInEvent.h
 322   gConnectConInEventGuid             = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
 323
 324   ## Include/Guid/StatusCodeDataTypeVariable.h
 325   gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
 326
 327   ## Include/Guid/MemoryProfile.h
 328   gEdkiiMemoryProfileGuid              = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
 329
 330   ## Include/Protocol/VarErrorFlag.h
 331   gEdkiiVarErrorFlagGuid               = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
 332
 333   ## GUID indicates the LZMA custom compress/decompress algorithm.
 334   #  Include/Guid/LzmaDecompress.h
 335   gLzmaCustomDecompressGuid      = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
 336   gLzmaF86CustomDecompressGuid     = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
 337
 338   ## Include/Guid/TtyTerm.h
 339   gEfiTtyTermGuid                = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
 340
 341   ## Include/Guid/HiiBootMaintenanceFormset.h
 342   gEfiIfrBootMaintenanceGuid      = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
 343
 344   gEfiIfrFrontPageGuid        = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
 345
 346   ## Include/Guid/RamDiskHii.h
 347   gRamDiskFormSetGuid            = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
 348
 349
 350 [Ppis]
 351   ## Include/Ppi/AtaController.h
 352   gPeiAtaControllerPpiGuid       = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
 353
 354   ## Include/Ppi/UsbHostController.h
 355   gPeiUsbHostControllerPpiGuid   = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
 356
 357   ## Include/Ppi/Usb2HostController.h
 358   gPeiUsb2HostControllerPpiGuid  = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22   }}
 359
 360   ## Include/Ppi/UsbController.h
 361   gPeiUsbControllerPpiGuid       = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
 362
 363   ## Include/Ppi/UsbIo.h
 364   gPeiUsbIoPpiGuid               = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
 365
 366   ## Include/Ppi/SecPerformance.h
 367   gPeiSecPerformancePpiGuid      = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
 368
 369   ## Include/Ppi/SmmCommunication.h
 370   gEfiPeiSmmCommunicationPpiGuid   =  { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
 371
 372   ## Include/Ppi/SmmAccess.h
 373   gPeiSmmAccessPpiGuid          =  { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
 374
 375   ## Include/Ppi/SmmControl.h
 376   gPeiSmmControlPpiGuid         =  { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
 377
 378   ## Include/Ppi/PostBootScriptTable.h
 379   gPeiPostScriptTablePpiGuid    =  { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
 380
 381   ## Include/Ppi/SerialPortPei.h
 382   gPeiSerialPortPpiGuid         =  { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
 383
 384   ## Include/Ppi/UfsHostController.h
 385   gEdkiiPeiUfsHostControllerPpiGuid  =  { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
 386
 387   ## Include/Ppi/IpmiPpi.h
 388   gPeiIpmiPpiGuid               =  { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
 389
 390 [Protocols]
 391   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
 392   #  Include/Protocol/LoadPe32Image.h
 393   #  This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
 394   #  If developer need implement such functionality, they should use BasePeCoffLib.
 395   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
 396
 397   ## Print protocol defines basic print functions to print the format unicode and ascii string.
 398   # Include/Protocol/Print2.h
 399   gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
 400
 401   ## This protocol defines the generic memory test interfaces in Dxe phase.
 402   # Include/Protocol/GenericMemoryTest.h
 403   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
 404
 405   ## Include/Protocol/Dpc.h
 406   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
 407
 408   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
 409   #  Include/Protocol/FaultTolerantWrite.h
 410   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 411
 412   ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
 413   #  Include/Protocol/SmmFaultTolerantWrite.h
 414   gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
 415
 416   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
 417   #  Include/Protocol/SwapAddressRange.h
 418   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
 419
 420   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
 421   #  Include/Protocol/SmmSwapAddressRange.h
 422   gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
 423
 424   ## This protocol is intended for use as a means to store data in the EFI SMM environment.
 425   #  Include/Protocol/SmmVariableProtocol.h
 426   gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
 427
 428   ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
 429   #  Include/Protocol/VariableLock.h
 430   gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
 431
 432   ## Include/Protocol/VarCheck.h
 433   gEdkiiVarCheckProtocolGuid     = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
 434
 435   ## Include/Protocol/SmmVarCheck.h
 436   gEdkiiSmmVarCheckProtocolGuid  = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
 437
 438   ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
 439   #  Include/Protocol/SmmFirmwareVolumeBlock.h
 440   gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
 441
 442   ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
 443   # Include/Guid/DebugMask.h
 444   gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
 445
 446   ## Include/Protocol/LockBox.h
 447   gEfiLockBoxProtocolGuid        = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
 448
 449   ## Include/Protocol/FormBrowserEx.h
 450   gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
 451
 452   ## Include/Protocol/EbcVmTest.h
 453   gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
 454
 455   ## Include/Protocol/EbcSimpleDebugger.h
 456   gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
 457
 458   ## Include/Protocol/BootLogo.h
 459   gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
 460
 461   ## Include/Protocol/DisplayProtocol.h
 462   gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
 463
 464   ## Include/Protocol/FormBrowserEx2.h
 465   gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
 466
 467   ## Include/Protocol/UfsHostController.h
 468   gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
 469
 470   ## Include/Protocol/EsrtManagement.h
 471   gEsrtManagementProtocolGuid         = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
 472
 473   ## Include/Protocol/SmmExitBootServices.h
 474   gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
 475
 476   ## Include/Protocol/SmmLegacyBoot.h
 477   gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
 478
 479   ## Include/Protocol/SmmReadyToBoot.h
 480   gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
 481
 482   ## Include/Protocol/PlatformLogo.h
 483   gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }
 484
 485   ## Include/Protocol/FileExplorer.h
 486   gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
 487
 488   ## Include/Protocol/IpmiProtocol.h
 489   gIpmiProtocolGuid    = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
 490   gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
 491
 492 #
 493 # [Error.gEfiMdeModulePkgTokenSpaceGuid]
 494 #   0x80000001 | Invalid value provided.
 495 #   0x80000002 | Reserved bits must be set to zero.
 496 #   0x80000003 | Incorrect progress code provided.
 497 #   0x80000004 | Invalid foreground color specified.
 498 #   0x80000005 | Invalid background color specified.
 499 #   0x80000006 | Incorrect error code provided.
 500 #
 501
 502 [PcdsFeatureFlag]
 503   ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
 504   #   TRUE  - Supports update capsule across a system reset.<BR>
 505   #   FALSE - Does not support update capsule across a system reset.<BR>
 506   # @Prompt Enable update capsule across a system reset.
 507   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
 508
 509   ## Indicates if all PCD PPI services will be enabled.<BR><BR>
 510   #   TRUE  - All PCD PPI services will be produced.<BR>
 511   #   FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
 512   # @Prompt Enable full PEI PCD services.
 513   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
 514
 515   ## Indicates if the Device Path To Text Protocol should be produced by the platform.
 516   #  It can be disabled to save size.<BR><BR>
 517   #   TRUE  - Device Path To Text Protocol will be produced.<BR>
 518   #   FALSE - Device Path To Text Protocol will not be produced.<BR>
 519   # @Prompt Enable Device Path to Text support.
 520   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
 521
 522   ## Indicates if the Device Path From Text Protocol should be produced by the platform.
 523   #  It can be disabled to save size.<BR><BR>
 524   #   TRUE  - Device Path From Text Protocol will be produced.<BR>
 525   #   FALSE - Device Path From Text Protocol will not be produced.<BR>
 526   # @Prompt Enable Device Path From Text support.
 527   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
 528
 529   ## Indicates if the statistics about variable usage will be collected. This information is
 530   #  stored as a vendor configuration table into the EFI system table.
 531   #  Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
 532   #  variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
 533   #   TRUE  - Statistics about variable usage will be collected.<BR>
 534   #   FALSE - Statistics about variable usage will not be collected.<BR>
 535   # @Prompt Enable variable statistics collection.
 536   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
 537
 538   ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
 539   #   TRUE  - Installs Unicode Collation Protocol.<BR>
 540   #   FALSE - Does not install Unicode Collation Protocol.<BR>
 541   # @Prompt Enable Unicode Collation support.
 542   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
 543
 544   ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
 545   #   TRUE  - Installs Unicode Collation 2 Protocol.<BR>
 546   #   FALSE - Does not install Unicode Collation 2 Protocol.<BR>
 547   # @Prompt Enable Unicode Collation 2 support.
 548   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
 549
 550   ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
 551   #  It could be set FALSE to save size.<BR><BR>
 552   #   TRUE  - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
 553   #   FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
 554   # @Prompt Enable ConOut GOP support.
 555   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
 556
 557   ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
 558   #  It could be set FALSE to save size.<BR><BR>
 559   #   TRUE  - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
 560   #   FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
 561   # @Prompt Enable ConOut UGA support.
 562   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
 563
 564   ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
 565   #  This PCD is used to tune PEI phase performance to reduce the search image time.
 566   #  It can be set according to the generated image section type.<BR><BR>
 567   #   TRUE  - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
 568   #   FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
 569   # @Prompt PeiCore search TE section first.
 570   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
 571
 572   ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
 573   #  interrupt to access usb device in the case of absence of usb stack.
 574   #  DUET platform requires the token to be TRUE.<BR><BR>
 575   #   TRUE  - Turn off usb legacy support.<BR>
 576   #   FALSE - Does not turn off usb legacy support.<BR>
 577   # @Prompt Turn off USB legacy support.
 578   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
 579
 580   ## Indicates if HiiImageProtocol will be installed.
 581   #  FALSE is for size reduction.<BR><BR>
 582   #   TRUE  - Installs HiiImageProtocol.<BR>
 583   #   FALSE - Does not install HiiImageProtocol.<BR>
 584   # @Prompt Enable HII image support.
 585   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
 586
 587   ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
 588   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
 589   #  from HII database.<BR><BR>
 590   #   TRUE  - USB KeyBoard Driver will disable the default keyboard layout.<BR>
 591   #   FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
 592   # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
 593   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
 594
 595   ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
 596   #   TRUE  - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
 597   #           the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
 598   #   FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
 599   #           the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
 600   # @Prompt Enable framework backward compatibility support.
 601   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
 602
 603   ## Indicates if HelloWorld Application will print the verbose information.
 604   #  This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
 605   #   TRUE  - HelloWorld Application will print the verbose information.<BR>
 606   #   FALSE - HelloWorld Application will not print the verbose information.<BR>
 607   # @Prompt Enable HelloWorld print.
 608   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
 609
 610   ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
 611   #   TRUE  - Produces FULL FTW protocol services (total six APIs).<BR>
 612   #   FALSE - Only FTW Write service is available.<BR>
 613   # @Prompt Enable FULL FTW services.
 614   gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
 615
 616   ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
 617   #   TRUE  - DXE IPL will support UEFI decompression.<BR>
 618   #   FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
 619   # @Prompt Enable UEFI decompression support in DXE IPL.
 620   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
 621
 622   ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
 623   #   TRUE  - PciBus driver supports the hot plug device.<BR>
 624   #   FALSE - PciBus driver doesn't support the hot plug device.<BR>
 625   # @Prompt Enable PciBus hot plug device support.
 626   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
 627
 628   ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
 629   #   TRUE  - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
 630   #   FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
 631   # @Prompt Enable PCI bridge IO alignment probe.
 632   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
 633
 634   ## Indicates if StatusCode is reported via Serial port.<BR><BR>
 635   #   TRUE  - Reports StatusCode via Serial port.<BR>
 636   #   FALSE - Does not report StatusCode via Serial port.<BR>
 637   # @Prompt Enable StatusCode via Serial port.
 638   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
 639
 640   ## Indicates if StatusCode is stored in memory.
 641   #  The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
 642   #   TRUE  - Stores StatusCode in memory.<BR>
 643   #   FALSE - Does not store StatusCode in memory.<BR>
 644   # @Prompt Enable StatusCode via memory.
 645   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
 646
 647   ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
 648   #   TRUE  - Replays PEI phase StatusCode in DXE phased.<BR>
 649   #   FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
 650   # @Prompt Enable PEI StatusCode replay in DXE phase
 651   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
 652
 653   ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
 654   #   TRUE  - Installs ACPI SDT protocol.<BR>
 655   #   FALSE - Does not install ACPI SDT protocol.<BR>
 656   # @Prompt Enable ACPI SDT support.
 657   gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
 658
 659   ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
 660   #  The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
 661   #   TRUE  - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
 662   #   FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
 663   # @Prompt Enable unaligned PCI I/O support.
 664   gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
 665
 666   ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
 667   #   TRUE  - TEXT statement will always be set to GrayOut.<BR>
 668   #   FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
 669   # @Prompt Always GrayOut TEXT statement.
 670   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
 671
 672   ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
 673   #   TRUE  - The unselectable menu will be set to GrayOut.<BR>
 674   #   FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
 675   # @Prompt GrayOut read only menu.
 676   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
 677
 678   ## Indicates if recovery from IDE disk will be supported.<BR><BR>
 679   #   TRUE  - Supports recovery from IDE disk.<BR>
 680   #   FALSE - Does not support recovery from IDE disk.<BR>
 681   # @Prompt Enable recovery on IDE disk.
 682   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
 683
 684   ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
 685   #   TRUE  - Supports recovery from FAT floppy disk.<BR>
 686   #   FALSE - Does not support recovery from FAT floppy disk.<BR>
 687   # @Prompt Enable recovery on FAT floppy disk.
 688   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
 689
 690   ## Indicates if recovery from data CD will be supported.<BR><BR>
 691   #   TRUE  - Supports recovery from data CD.<BR>
 692   #   FALSE - Does not support recovery from data CD.<BR>
 693   # @Prompt Enable recovery on data CD.
 694   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
 695
 696   ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
 697   #   TRUE  - Supports recovery from USB disk.<BR>
 698   #   FALSE - Does not support recovery from USB disk.<BR>
 699   # @Prompt Enable recovery on FAT USB disk.
 700   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
 701
 702   ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
 703   #   TRUE  - S3 performance data will be supported in ACPI FPDT table.<BR>
 704   #   FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
 705   # @Prompt Enable S3 performance data support.
 706   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
 707
 708   ## Indicates if Serial device uses half hand shake.<BR><BR>
 709   #   TRUE  - Serial device uses half hand shake.<BR>
 710   #   FALSE - Serial device doesn't use half hand shake.<BR>
 711   # @Prompt Enable Serial device Half Hand Shake
 712   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
 713
 714   ## Indicates if HII data and configuration has been exported.<BR><BR>
 715   #  Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
 716   #  simulator platform because the performance cost for this feature.
 717   #   TRUE  - Export HII data and configuration data.<BR>
 718   #   FALSE - Does not export HII data and configuration.<BR>
 719   # @Prompt Enable export HII data and configuration to be used in OS runtime.
 720   gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
 721
 722 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
 723   ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
 724   #  It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
 725   #  is built in firmware.<BR><BR>
 726   #   TRUE  - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
 727   #   FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
 728   # @Prompt DxeIpl switch to long mode.
 729   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
 730
 731   ## Indicates if DxeIpl should rebuild page tables. This flag only
 732   #  makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
 733   #   TRUE  - DxeIpl will rebuild page tables.<BR>
 734   #   FALSE - DxeIpl will not rebuild page tables.<BR>
 735   # @Prompt DxeIpl rebuild page tables.
 736   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
 737
 738 [PcdsFixedAtBuild]
 739   ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
 740   #  0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
 741   #  0:                  Disable the feature.<BR>
 742   #  Other Value:        Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
 743   # @Prompt Enable LMFA feature.
 744   # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
 745   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
 746
 747   ## Progress Code for OS Loader LoadImage start.<BR><BR>
 748   #  PROGRESS_CODE_OS_LOADER_LOAD   = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
 749   # @Prompt Progress Code for OS Loader LoadImage start.
 750   # @ValidList  0x80000003 | 0x03058000
 751   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
 752
 753   ## Progress Code for OS Loader StartImage start.<BR><BR>
 754   #  PROGRESS_CODE_OS_LOADER_START  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
 755   # @Prompt Progress Code for OS Loader StartImage start.
 756   # @ValidList  0x80000003 | 0x03058001
 757   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
 758
 759   ## Progress Code for S3 Suspend start.<BR><BR>
 760   #  PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000))    = 0x03078000<BR>
 761   # @Prompt Progress Code for S3 Suspend start.
 762   # @ValidList  0x80000003 | 0x03078000
 763   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
 764
 765   ## Progress Code for S3 Suspend end.<BR><BR>
 766   #  PROGRESS_CODE_S3_SUSPEND_END   = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001))    = 0x03078001<BR>
 767   # @Prompt Progress Code for S3 Suspend end.
 768   # @ValidList  0x80000003 | 0x03078001
 769   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
 770
 771   ## Error Code for SetVariable failure.<BR><BR>
 772   #  EDKII_ERROR_CODE_SET_VARIABLE  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
 773   # @Prompt Error Code for SetVariable failure.
 774   # @ValidList  0x80000006 | 0x03058002
 775   gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
 776
 777 [PcdsFixedAtBuild, PcdsPatchableInModule]
 778   ## Dynamic type PCD can be registered callback function for Pcd setting action.
 779   #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
 780   #  for a dynamic PCD used in PEI phase.
 781   # @Prompt Max PEI PCD callback number per PCD entry.
 782   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
 783
 784   ## VPD type PCD  allows a developer to point to an absolute physical address PcdVpdBaseAddress
 785   #  to store PCD value.
 786   # @Prompt VPD base address.
 787   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
 788
 789   ## Maximum number of FV is supported by PeiCore's dispatching.
 790   # @Prompt Maximum number of FV supported by PeiCore.
 791   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
 792
 793   ## Maximum File count in every FV is supported by PeiCore's dispatching.
 794   #  PeiCore supported File type includes PEIM, Combined PEIM and FV.
 795   # @Prompt Maximum File count per FV supported by PeiCore.
 796   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
 797
 798   ## Maximum stack size for PeiCore.
 799   # @Prompt Maximum stack size for PeiCore.
 800   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
 801
 802   ## Maximum PPI count is supported by PeiCore's PPI database.
 803   # @Prompt Maximum PPI count supported by PeiCore.
 804   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
 805
 806   ## The maximum size of a single non-HwErr type variable.
 807   # @Prompt Maximum variable size.
 808   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
 809
 810   ## The maximum size of a single authenticated variable.
 811   # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
 812   # @Prompt Maximum authenticated variable size.
 813   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
 814
 815   ## The maximum size of single hardware error record variable.<BR><BR>
 816   # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
 817   # In IA64 platforms, this value should be larger than 128KB.<BR>
 818   # @Prompt Maximum HwErr variable size.
 819   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
 820
 821   ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
 822   # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
 823   # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
 824   # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
 825   # @Prompt HwErr variable storage size.
 826   gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
 827
 828   ## The size of maximum user NV variable space.<BR><BR>
 829   # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
 830   # If the value is 0, it means user variable share the same NV storage with system variable,
 831   # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
 832   # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
 833   # otherwise the variable will be regarded as user variable.<BR>
 834   #  1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
 835   #  2) Variables managed by Variable driver internally.<BR>
 836   #  3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
 837   #  4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
 838   # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
 839   # @Prompt Maximum user NV variable space size.
 840   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
 841
 842   ## The size of NV variable space reserved at UEFI boottime.<BR><BR>
 843   # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
 844   # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
 845   # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
 846   # Then the common NV variable space size at boottime will be
 847   #  (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
 848   # and the common NV variable space size at runtime will be
 849   #  (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
 850   # @Prompt Boottime reserved NV variable space size.
 851   gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
 852
 853   ## Reclaim variable space at EndOfDxe.<BR><BR>
 854   # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
 855   # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
 856   # @Prompt Reclaim variable space at EndOfDxe.
 857   gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
 858
 859   ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
 860   # @Prompt Variable storage size.
 861   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
 862
 863   ## FFS filename to find the ACPI tables.
 864   # @Prompt FFS name of ACPI tables storage.
 865   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
 866
 867   ## FFS filename to find the capsule coalesce image.
 868   # @Prompt FFS name of capsule coalesce image.
 869   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
 870
 871   ## Maximum number of performance log entries during PEI phase.
 872   # @Prompt Maximum number of PEI performance log entries.
 873   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
 874
 875   ## RTC Update Timeout Value(microsecond).
 876   # @Prompt RTC Update Timeout Value.
 877   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
 878
 879   ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
 880   #   TRUE  - 16550 serial port registers are in MMIO space.<BR>
 881   #   FALSE - 16550 serial port registers are in I/O space.<BR>
 882   # @Prompt Serial port registers use MMIO.
 883   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
 884
 885   ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
 886   #   TRUE  - 16550 serial port hardware flow control will be enabled.<BR>
 887   #   FALSE - 16550 serial port hardware flow control will be disabled.<BR>
 888   # @Prompt Enable serial port hardware flow control.
 889   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
 890
 891   ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
 892   #  This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
 893   #   TRUE  - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
 894   #   FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
 895   # @Prompt Enable serial port cable detetion.
 896   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
 897
 898   ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
 899   # @Prompt Base address of serial port registers.
 900   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
 901
 902   ## Baud rate for the 16550 serial port.  Default is 115200 baud.
 903   # @Prompt Baud rate for serial port.
 904   # @ValidList  0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
 905   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
 906
 907   ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
 908   #    BIT1..BIT0 - Data bits.  00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
 909   #    BIT2       - Stop Bits.  0 = 1 stop bit.  1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
 910   #    BIT5..BIT3 - Parity.  xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
 911   #    BIT7..BIT6 - Reserved.  Must be 0.<BR>
 912   #
 913   #  Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
 914   # @Prompt Serial port Line Control settings.
 915   # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
 916   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
 917
 918   ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
 919   #    BIT0       - FIFO Enable.  0 = Disable FIFOs.  1 = Enable FIFOs.<BR>
 920   #    BIT1       - Clear receive FIFO.  1 = Clear FIFO.<BR>
 921   #    BIT2       - Clear transmit FIFO.  1 = Clear FIFO.<BR>
 922   #    BIT4..BIT3 - Reserved.  Must be 0.<BR>
 923   #    BIT5       - Enable 64-byte FIFO.  0 = Disable 64-byte FIFO.  1 = Enable 64-byte FIFO<BR>
 924   #    BIT7..BIT6 - Reserved.  Must be 0.<BR>
 925   #
 926   #  Default is to enable and clear all FIFOs.<BR>
 927   # @Prompt Serial port FIFO Control settings.
 928   # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
 929   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
 930
 931   ## This setting can override the default TFTP block size. A value of 0 computes
 932   # the default from MTU information. A non-zero value will be used as block size
 933   # in bytes.
 934   # @Prompt TFTP block size.
 935   gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
 936
 937   ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
 938   #  structure. The default value for this PCD is 0, which means that the DXE Core
 939   #  will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
 940   #  boundary as close to the top of memory as feasible.  If this PCD is set to a
 941   #  value other than 0, then the DXE Core will first attempt to allocate the
 942   #  EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
 943   #  by this PCD, and if that allocation fails, retry the allocation on a 4MB
 944   #  boundary as close to the top of memory as feasible.
 945   # @Prompt Maximum Efi System Table Pointer address.
 946   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
 947
 948   ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
 949   #   TRUE  - Shadow PEIM on S3 boot path after memory is ready.<BR>
 950   #   FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
 951   # @Prompt Shadow Peim On S3 Boot.
 952   gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
 953
 954   ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
 955   #  This PCD is used on other boot path except for S3 boot.
 956   #   TRUE  - Shadow PEIM and PeiCore after memory is ready.<BR>
 957   #   FALSE - Not shadow PEIM after memory is ready.<BR>
 958   # @Prompt Shadow Peim and PeiCore on boot
 959   gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
 960
 961   ## The mask is used to control memory profile behavior.<BR><BR>
 962   #  BIT0 - Enable UEFI memory profile.<BR>
 963   #  BIT1 - Enable SMRAM profile.<BR>
 964   # @Prompt Memory Profile Property.
 965   # @Expression  0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0
 966   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
 967
 968   ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
 969   # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
 970   #
 971   # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
 972   #  EfiReservedMemoryType          0x0001<BR>
 973   #  EfiLoaderCode                  0x0002<BR>
 974   #  EfiLoaderData                  0x0004<BR>
 975   #  EfiBootServicesCode            0x0008<BR>
 976   #  EfiBootServicesData            0x0010<BR>
 977   #  EfiRuntimeServicesCode         0x0020<BR>
 978   #  EfiRuntimeServicesData         0x0040<BR>
 979   #  EfiConventionalMemory          0x0080<BR>
 980   #  EfiUnusableMemory              0x0100<BR>
 981   #  EfiACPIReclaimMemory           0x0200<BR>
 982   #  EfiACPIMemoryNVS               0x0400<BR>
 983   #  EfiMemoryMappedIO              0x0800<BR>
 984   #  EfiMemoryMappedIOPortSpace     0x1000<BR>
 985   #  EfiPalCode                     0x2000<BR>
 986   #  EfiPersistentMemory            0x4000<BR>
 987   #  OEM Reserved       0x4000000000000000<BR>
 988   #  OS Reserved        0x8000000000000000<BR>
 989   #
 990   # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
 991   #
 992   # @Prompt Memory profile memory type.
 993   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
 994
 995   ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
 996   #  information that describes the path that contains zero or more PCI to PCI briges
 997   #  followed by a PCI serial device.  Each array entry is 4-bytes in length.  The
 998   #  first byte is the PCI Device Number, then second byte is the PCI Function Number,
 999   #  and the last two bytes are the offset to the PCI power management capabilities
1000   #  register used to manage the D0-D3 states.  If a PCI power management capabilities
1001   #  register is not present, then the last two bytes in the offset is set to 0.  The
1002   #  array is terminated by an array entry with a PCI Device Number of 0xFF.  For a
1003   #  non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
1004   # @Prompt Pci Serial Device Info
1005   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
1006
1007   ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
1008   #  BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
1009   #  describes the parameters of special PCI serial devices.
1010   #  Each array entry is 24-byte in length. The array is terminated
1011   #  by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
1012   #  standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
1013   #  The C style structure is defined as below:<BR>
1014   #  typedef struct {<BR>
1015   #    UINT16  VendorId;          ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>
1016   #    UINT16  DeviceId;          ///< Device ID to match the PCI device.<BR>
1017   #    UINT32  ClockRate;         ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>
1018   #    UINT64  Offset;            ///< The byte offset into to the BAR.<BR>
1019   #    UINT8   BarIndex;          ///< Which BAR to get the UART base address.<BR>
1020   #    UINT8   RegisterStride;    ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>
1021   #    UINT16  ReceiveFifoDepth;  ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
1022   #    UINT16  TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
1023   #    UINT8   Reserved[2];<BR>
1024   #  } PCI_SERIAL_PARAMETER;<BR>
1025   #  It contains zero or more instances of the above structure.<BR>
1026   #  For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
1027   #  to contain  two instances of the above structure, with the VendorId and DeviceId
1028   #  equals to the Device ID and Vendor ID of the device; If the PCI device uses the
1029   #  first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
1030   #  BarIndex of second one equals to 1; If the PCI device uses the first BAR to
1031   #  support both UARTs, BarIndex of both instance equals to 0, Offset of first
1032   #  instance equals to 0 and Offset of second one equals to a value bigger than or
1033   #  equal to 8.<BR>
1034   #  For certain UART whose register needs to be accessed in DWORD aligned address,
1035   #  RegisterStride equals to 4.
1036   # @Prompt Pci Serial Parameters
1037   gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
1038
1039   ## Serial Port Extended Transmit FIFO Size.  The default is 64 bytes.
1040   # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
1041   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
1042
1043   ## This PCD points to the file name GUID of the BootManagerMenuApp
1044   #  Platform can customize the PCD to point to different application for Boot Manager Menu
1045   # @Prompt Boot Manager Menu File
1046   gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
1047
1048   ## This PCD points to the formset GUID of the driver health management form
1049   #  The form will be popped up by BDS core when there are Configuration Required driver health intances.
1050   #  Platform can customize the PCD to point to different formset.
1051   # @Prompt Driver Health Management Form
1052   gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
1053
1054   ## The number of bytes between registers in serial device.  The default is 1 byte.
1055   # @Prompt Serial Port Register Stride in Bytes
1056   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
1057
1058   ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
1059   # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
1060   # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
1061   # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
1062   gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
1063
1064   ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS
1065   #  These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h
1066   #   BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>
1067   #   BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>
1068   #   BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>
1069   #   BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>
1070   #   BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>
1071   # @Prompt Exposed ACPI table versions.
1072   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
1073
1074 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1075   ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
1076   #  This PCD could be set to 0 then console output would be at max column and max row.
1077   # @Prompt Console output row.
1078   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
1079
1080   ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
1081   #  This PCD could be set to 0 then console output would be at max column and max row.
1082   # @Prompt Console output column.
1083   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
1084
1085   ## This PCD defines the video horizontal resolution.
1086   #  If this PCD is set to 0 then video resolution would be at highest resolution.
1087   # @Prompt Video horizontal resolution.
1088   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
1089
1090   ## This PCD defines the video vertical resolution.
1091   #  If this PCD is set to 0 then video resolution would be at highest resolution.
1092   # @Prompt Video vertical resolution.
1093   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
1094
1095   #  The 4 PCDs below are used to specify the video resolution and text mode of text setup.
1096   #  To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
1097   #  PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
1098   #  Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
1099   #  (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
1100   #  for text setup.
1101
1102   ## Specify the video horizontal resolution of text setup.
1103   # @Prompt Video Horizontal Resolution of Text Setup
1104   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
1105
1106   ## Specify the video vertical resolution of text setup.
1107   # @Prompt Video Vertical Resolution of Text Setup
1108   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
1109
1110   ## Specify the console output column of text setup.
1111   # @Prompt Console Output Column of Text Setup
1112   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
1113
1114   ## Specify the console output row of text setup.
1115   # @Prompt Console Output Row of Text Setup
1116   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
1117
1118 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1119   ## UART clock frequency is for the baud rate configuration.
1120   # @Prompt Serial Port Clock Rate.
1121   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
1122
1123   ## This PCD points to the front page formset GUID
1124   #  Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
1125   # @Prompt Front Page Formset.
1126   gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
1127
1128   ## Base address of the NV variable range in flash device.
1129   # @Prompt Base address of flash NV variable range.
1130   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
1131
1132   ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
1133   #  The root cause is that variable driver will use FTW protocol to reclaim variable region.
1134   #  If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1135   #  be reflushed through the manner of fault tolerant write.
1136   # @Prompt Size of flash NV variable range.
1137   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
1138
1139   ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1140   # @Prompt Base address of flash FTW spare block range.
1141   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
1142
1143   ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
1144   # The root cause is that variable driver will use FTW protocol to reclaim variable region.
1145   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1146   # be reflushed through the manner of fault tolerant write.
1147   # @Prompt Size of flash FTW spare block range.
1148   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
1149
1150   ## Base address of the FTW working block range in flash device.
1151   # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1152   # @Prompt Base address of flash FTW working block range.
1153   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
1154
1155   ## Size of the FTW working block range.
1156   # If the value is less than one block size, the work space range should not span blocks.
1157   # If the value is larger than one block size, it should be block size aligned.
1158   # @Prompt Size of flash FTW working block range.
1159   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
1160
1161   ## 64-bit Base address of the NV variable range in flash device.
1162   # @Prompt 64-bit Base address of flash NV variable range.
1163   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
1164
1165   ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1166   # @Prompt 64-bit Base address of flash FTW spare block range.
1167   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
1168
1169   ## 64-bit Base address of the FTW working block range in flash device.
1170   # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1171   # @Prompt 64-bit Base address of flash FTW working block range.
1172   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
1173
1174   ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
1175   #  The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
1176   # @Prompt Reserved memory range for EMU variable NV storage.
1177   gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
1178
1179   ## This PCD defines the times to print hello world string.
1180   #  This PCD is a sample to explain UINT32 PCD usage.
1181   # @Prompt HellowWorld print times.
1182   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
1183
1184   ## This PCD defines the HelloWorld print string.
1185   #  This PCD is a sample to explain String typed PCD usage.
1186   # @Prompt HelloWorld print string.
1187   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
1188
1189   ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
1190   #  The default max size is 100MB (0x6400000) for more than one large capsule images.
1191   # @Prompt Max size of populated capsule.
1192   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
1193
1194   ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
1195   #  The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
1196   # @Prompt Max size of non-populated capsule.
1197   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
1198
1199   ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
1200   # @Prompt Firmware vendor.
1201   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
1202
1203   ## Firmware revision that is the default revision filled into the EFI System Table.
1204   # @Prompt Firmware revision.
1205   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
1206
1207   ## Null-terminated Unicode string that describes the firmware version.
1208   # @Prompt Firmware version string.
1209   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
1210
1211   ## Null-terminated Unicode string that contains the date the firmware was released
1212   # @Prompt Firmware release data string.
1213   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
1214
1215   ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
1216   #  (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
1217   #  The default value in PeiPhase is 1 KBytes.<BR>
1218   #  The default value in DxePhase is 128 KBytes.<BR>
1219   # @Prompt StatusCode memory size.
1220   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
1221
1222   ## Indicates if to reset system when memory type information changes.<BR><BR>
1223   #   TRUE  - Resets system when memory type information changes.<BR>
1224   #   FALSE - Does not reset system when memory type information changes.<BR>
1225   # @Prompt Reset on memory type information change.
1226   gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
1227
1228   ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
1229   #  Only following values defined in UEFI specification are valid:<BR><BR>
1230   #  0x00 (EFI_BLACK)<BR>
1231   #  0x01 (EFI_BLUE)<BR>
1232   #  0x02 (EFI_GREEN)<BR>
1233   #  0x03 (EFI_CYAN)<BR>
1234   #  0x04 (EFI_RED)<BR>
1235   #  0x05 (EFI_MAGENTA)<BR>
1236   #  0x06 (EFI_BROWN)<BR>
1237   #  0x07 (EFI_LIGHTGRAY)<BR>
1238   #  0x08 (EFI_DARKGRAY)<BR>
1239   #  0x09 (EFI_LIGHTBLUE)<BR>
1240   #  0x0A (EFI_LIGHTGREEN)<BR>
1241   #  0x0B (EFI_LIGHTCYAN)<BR>
1242   #  0x0C (EFI_LIGHTRED)<BR>
1243   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1244   #  0x0E (EFI_YELLOW)<BR>
1245   #  0x0F (EFI_WHITE)<BR>
1246   # @Prompt Foreground color for browser subtile.
1247   # @ValidRange 0x80000004 | 0x00 - 0x0F
1248   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
1249
1250   ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
1251   #  Only following values defined in UEFI specification are valid:<BR><BR>
1252   #  0x00 (EFI_BLACK)<BR>
1253   #  0x01 (EFI_BLUE)<BR>
1254   #  0x02 (EFI_GREEN)<BR>
1255   #  0x03 (EFI_CYAN)<BR>
1256   #  0x04 (EFI_RED)<BR>
1257   #  0x05 (EFI_MAGENTA)<BR>
1258   #  0x06 (EFI_BROWN)<BR>
1259   #  0x07 (EFI_LIGHTGRAY)<BR>
1260   #  0x08 (EFI_DARKGRAY)<BR>
1261   #  0x09 (EFI_LIGHTBLUE)<BR>
1262   #  0x0A (EFI_LIGHTGREEN)<BR>
1263   #  0x0B (EFI_LIGHTCYAN)<BR>
1264   #  0x0C (EFI_LIGHTRED)<BR>
1265   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1266   #  0x0E (EFI_YELLOW)<BR>
1267   #  0x0F (EFI_WHITE)<BR>
1268   # @Prompt Foreground color for browser field.
1269   # @ValidRange 0x80000004 | 0x00 - 0x0F
1270   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
1271
1272   ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
1273   #  The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
1274   #  0x00 (EFI_BLACK)<BR>
1275   #  0x01 (EFI_BLUE)<BR>
1276   #  0x02 (EFI_GREEN)<BR>
1277   #  0x03 (EFI_CYAN)<BR>
1278   #  0x04 (EFI_RED)<BR>
1279   #  0x05 (EFI_MAGENTA)<BR>
1280   #  0x06 (EFI_BROWN)<BR>
1281   #  0x07 (EFI_LIGHTGRAY)<BR>
1282   #  0x08 (EFI_DARKGRAY)<BR>
1283   #  0x09 (EFI_LIGHTBLUE)<BR>
1284   #  0x0A (EFI_LIGHTGREEN)<BR>
1285   #  0x0B (EFI_LIGHTCYAN)<BR>
1286   #  0x0C (EFI_LIGHTRED)<BR>
1287   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1288   #  0x0E (EFI_YELLOW)<BR>
1289   #  0x0F (EFI_WHITE)<BR>
1290   # @Prompt Foreground color for highlighted browser field.
1291   # @ValidRange 0x80000004 | 0x00 - 0x0F
1292   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
1293
1294   ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
1295   #  The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
1296   #  0x00 (EFI_BACKGROUND_BLACK)<BR>
1297   #  0x10 (EFI_BACKGROUND_BLUE)<BR>
1298   #  0x20 (EFI_BACKGROUND_GREEN)<BR>
1299   #  0x30 (EFI_BACKGROUND_CYAN)<BR>
1300   #  0x40 (EFI_BACKGROUND_RED)<BR>
1301   #  0x50 (EFI_BACKGROUND_MAGENTA)<BR>
1302   #  0x60 (EFI_BACKGROUND_BROWN)<BR>
1303   #  0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
1304   # @Prompt Background color for highlighted browser field.
1305   # @ValidList  0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
1306   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
1307
1308   ## Time in second to delay for SATA devices to spin-up for recovery.
1309   # @Prompt SATA spin-up delay time in second for recovery path.
1310   gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
1311
1312   ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
1313   #  to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
1314   #  When changing the value of this PCD, the platform developer should make sure the memory size is
1315   #  large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
1316   # @Prompt Reserved page number for S3 Boot Script Runtime Table.
1317   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
1318
1319   ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
1320   #  The default size is 32K. When changing the value of this PCD, the platform developer should
1321   #  make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
1322   # @Prompt Stack size for CapsulePei transfer to long mode.
1323   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
1324
1325   ## Indicates if 1G page table will be enabled.<BR><BR>
1326   #   TRUE  - 1G page table will be enabled.<BR>
1327   #   FALSE - 1G page table will not be enabled.<BR>
1328   # @Prompt Enable 1G page table support.
1329   gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
1330
1331   ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
1332   #   TRUE  - Single Root I/O virtualization is supported.<BR>
1333   #   FALSE - Single Root I/O virtualization is not supported.<BR>
1334   # @Prompt Enable SRIOV support.
1335   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
1336
1337   ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
1338   #   TRUE  - Alternative Routing-ID is supported.<BR>
1339   #   FALSE - Alternative Routing-ID is not supported.<BR>
1340   # @Prompt Enable ARI support.
1341   gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
1342
1343   ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
1344   #   TRUE  - Multi Root I/O virtualization is supported.<BR>
1345   #   FALSE - Multi Root I/O virtualization is not supported.<BR>
1346   # @Prompt Enable MRIOV support.
1347   gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
1348
1349   ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
1350   #  BITN set indicates 2 of n+12 power<BR>
1351   #  BIT0 set indicates 4KB alignment<BR>
1352   #  BIT1 set indicates 8KB alignment<BR>
1353   # @Prompt SRIOV system page size.
1354   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
1355
1356   ## SMBIOS version.
1357   # @Prompt SMBIOS version.
1358   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055
1359
1360   ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1361   # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1362   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A
1363
1364   ## SMBIOS produce method.
1365   #  BIT0 set indicates 32-bit entry point and table are produced.<BR>
1366   #  BIT1 set indicates 64-bit entry point and table are produced.<BR>
1367   # @Prompt The policy to produce SMBIOS entry point and table.
1368   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
1369
1370   ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
1371   #  the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
1372   # @Prompt Pad size for extension FPDT boot records.
1373   gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
1374
1375   ## Indicates if ConIn device are connected on demand.<BR><BR>
1376   #   TRUE  - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
1377   #           by Consplitter should be called before any real key read operation.<BR>
1378   #   FALSE - ConIn device may be connected normally during BDS.<BR>
1379   # @Prompt ConIn connect on demand.
1380   gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
1381
1382   ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
1383   #   TRUE  - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
1384   #   FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
1385   # @Prompt Enable ATA S.M.A.R.T feature.
1386   gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
1387
1388   ## Indicates if full PCI enumeration is disabled.<BR><BR>
1389   #   TRUE  - Full PCI enumeration is disabled.<BR>
1390   #   FALSE - Full PCI enumeration is not disabled.<BR>
1391   # @Prompt Disable full PCI enumeration.
1392   gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
1393
1394   ## Disk I/O - Number of Data Buffer block.
1395   # Define the size in block of the pre-allocated buffer. It provide better
1396   # performance for large Disk I/O requests.
1397   # @Prompt Disk I/O - Number of Data Buffer block.
1398   gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
1399
1400   ## This PCD specifies the PCI-based UFS host controller mmio base address.
1401   # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
1402   # host controllers, their mmio base addresses are calculated one by one from this base address.
1403   # @Prompt Mmio base address of pci-based UFS host controller.
1404   gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
1405
1406   ## Specify Max ESRT cache entry number supported for FMP instances
1407   #
1408   # @Prompt Max FMP ESRT entry number to be synced & cached in repository.
1409   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
1410
1411   ## Specify Max ESRT cache entry number supported for Non FMP instances
1412   #
1413   # @Prompt Max Non-FMP ESRT entry number to be cached in repository.
1414   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
1415
1416   ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
1417   #
1418   # @Prompt Flag to request system reboot after processing capsule.
1419   gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
1420
1421   ## Publish PropertiesTable or not.
1422   #
1423   # If this PCD is TRUE, DxeCore publishs PropertiesTable.
1424   # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
1425   # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
1426   # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
1427   # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
1428   #
1429   # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
1430   #   1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
1431   #      use EfiRuntimeServicesData for runtime driver PE image header and other section.
1432   #   2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
1433   #   3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
1434   #   4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
1435   #
1436   # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
1437   # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
1438   # section. If PE code/data sections are merged, the result is unpredictable.
1439   #
1440   # UEFI 2.6 specification does not recommend to use this BIT0 attribute.
1441   #
1442   # @Prompt Publish UEFI PropertiesTable.
1443   gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e
1444
1445   ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
1446   # @Prompt Default OEM ID for ACPI table creation.
1447   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
1448
1449   ## Default OEM Table ID for ACPI table creation, it is "EDK2    ".
1450   #  According to ACPI specification, this field is particularly useful when
1451   #  defining a definition block to distinguish definition block functions.
1452   #  The OEM assigns each dissimilar table a new OEM Table ID.
1453   #  This PCD is ignored for definition block.
1454   # @Prompt Default OEM Table ID for ACPI table creation.
1455   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
1456
1457   ## Default OEM Revision for ACPI table creation.
1458   #  According to ACPI specification, for LoadTable() opcode, the OS can also
1459   #  check the OEM Table ID and Revision ID against a database for a newer
1460   #  revision Definition Block of the same OEM Table ID and load it instead.
1461   #  This PCD is ignored for definition block.
1462   # @Prompt Default OEM Revision for ACPI table creation.
1463   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
1464
1465   ## Default Creator ID for ACPI table creation.
1466   #  According to ACPI specification, for tables containing Definition Blocks,
1467   #  this is the ID for the ASL Compiler.
1468   #  This PCD is ignored for definition block.
1469   # @Prompt Default Creator ID for ACPI table creation.
1470   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
1471
1472   ## Default Creator Revision for ACPI table creation.
1473   #  According to ACPI specification, for tables containing Definition Blocks,
1474   #  this is the revision for the ASL Compiler.
1475   #  This PCD is ignored for definition block.
1476   # @Prompt Default Creator Revision for ACPI table creation.
1477   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
1478
1479   ## Indicates if to set NX for stack.<BR><BR>
1480   #  For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
1481   #  For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
1482   #  IA32 PAE is supported and Execute Disable Bit is available.<BR>
1483   #   TRUE  - to set NX for stack.<BR>
1484   #   FALSE - Not to set NX for stack.<BR>
1485   # @Prompt Set NX for stack.
1486   gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
1487
1488 [PcdsPatchableInModule]
1489   ## Specify memory size with page number for PEI code when
1490   #  Loading Module at Fixed Address feature is enabled.
1491   #  The value will be set by the build tool.
1492   # @Prompt LMFA PEI code page number.
1493   # @ValidList  0x80000001 | 0
1494   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
1495
1496   ## Specify memory size with page number for DXE boot time code when
1497   #  Loading Module at Fixed Address feature is enabled.
1498   #  The value will be set by the build tool.
1499   # @Prompt LMFA DXE boot code page number.
1500   # @ValidList  0x80000001 | 0
1501   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
1502
1503   ## Specify memory size with page number for DXE runtime code when
1504   #  Loading Module at Fixed Address feature is enabled.
1505   #  The value will be set by the build tool.
1506   # @Prompt LMFA DXE runtime code page number.
1507   # @ValidList  0x80000001 | 0
1508   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
1509
1510   ## Specify memory size with page number for SMM code when
1511   #  Loading Module at Fixed Address feature is enabled.
1512   #  The value will be set by the build tool.
1513   # @Prompt LMFA SMM code page number.
1514   # @ValidList  0x80000001 | 0
1515   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
1516
1517 [PcdsDynamic, PcdsDynamicEx]
1518   ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
1519   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1520   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1521   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1522   # @Prompt S3 Boot Script Table Private Data pointer.
1523   # @ValidList  0x80000001 | 0x0
1524   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
1525
1526   ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
1527   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1528   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1529   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1530   # @Prompt S3 Boot Script Table Private Smm Data pointer.
1531   # @ValidList  0x80000001 | 0x0
1532   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
1533
1534   ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
1535   #  Virtual to Physical mapping according to the processor physical address bits.
1536   # @Prompt Identify Mapping Page Table pointer.
1537   # @ValidList  0x80000001 | 0x0
1538   gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
1539
1540 [UserExtensions.TianoCore."ExtraFiles"]
1541   MdeModulePkgExtra.uni