MdeModulePkg/MdeModulePkg.dec

   1 ## @file  MdeModulePkg.dec
   2 # This package provides the modules that conform to UEFI/PI Industry standards.
   3 # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
   4 # and libraries instances, which are used for those modules.
   5 #
   6 # Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
   7 # This program and the accompanying materials are licensed and made available under
   8 # the terms and conditions of the BSD License that accompanies this distribution.
   9 # The full text of the license may be found at
  10 # http://opensource.org/licenses/bsd-license.php.
  11 #
  12 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  13 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  14 #
  15 ##
  16
  17
  18 [Defines]
  19   DEC_SPECIFICATION              = 0x00010005
  20   PACKAGE_NAME                   = MdeModulePkg
  21   PACKAGE_UNI_FILE               = MdeModulePkg.uni
  22   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  23   PACKAGE_VERSION                = 0.96
  24
  25 [Includes]
  26   Include
  27
  28
  29 [LibraryClasses]
  30   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  31   #   This library is only intended to be used by UEFI network stack modules.
  32   IpIoLib|Include/Library/IpIoLib.h
  33
  34   ##  @libraryclass  Basic function for UEFI network stack.
  35   #   This library is only intended to be used by UEFI network stack modules.
  36   NetLib|Include/Library/NetLib.h
  37
  38   ##  @libraryclass  The helper routines to access UDP service.
  39   #   This library is only intended to be used by UEFI network stack modules.
  40   UdpIoLib|Include/Library/UdpIoLib.h
  41
  42   ##  @libraryclass  The helper routines to access TCP service.
  43   #   This library is only intended to be used by UEFI network stack modules.
  44   TcpIoLib|Include/Library/TcpIoLib.h
  45
  46   ##  @libraryclass  The helper routines to access HTTP service.
  47   #   This library is only intended to be used by UEFI network stack modules.
  48   HttpLib|Include/Library/HttpLib.h
  49
  50   ##  @libraryclass  Defines a set of methods to reset whole system.
  51   ResetSystemLib|Include/Library/ResetSystemLib.h
  52
  53   ##  @libraryclass  Defines a set of methods related do S3 mode.
  54   #   This library class is no longer used and modules using this library should
  55   #   directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
  56   S3Lib|Include/Library/S3Lib.h
  57
  58   ##  @libraryclass  Defines a set of methods related recovery mode.
  59   #   This library class is no longer used and modules using this library should
  60   #   directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
  61   RecoveryLib|Include/Library/RecoveryLib.h
  62
  63   ##  @libraryclass  Provides HII related functions.
  64   HiiLib|Include/Library/HiiLib.h
  65
  66   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  67   CapsuleLib|Include/Library/CapsuleLib.h
  68
  69   ##  @libraryclass  Library for Deferred Procedure Calls.
  70   DpcLib|Include/Library/DpcLib.h
  71
  72   ##  @libraryclass    Provides global variables that are pointers
  73   #   to the UEFI HII related protocols.
  74   #
  75   UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
  76
  77   ##  @libraryclass    Provides a set of interfaces to abstract the policy of security measurement.
  78   #
  79   SecurityManagementLib|Include/Library/SecurityManagementLib.h
  80
  81   ##  @libraryclass  OEM status code libary is used to report status code to OEM device.
  82   #
  83   OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
  84
  85   ##  @libraryclass  Debug Agent is used to provide soft debug capability.
  86   #
  87   DebugAgentLib|Include/Library/DebugAgentLib.h
  88
  89   ##  @libraryclass  Provide platform specific hooks.
  90   #
  91   PlatformHookLib|Include/Library/PlatformHookLib.h
  92
  93   ##  @libraryclass  Provide platform specific hooks for SMM core.
  94   #
  95   SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
  96
  97   ##  @libraryclass  Provide capability to maintain the data integrity cross S3 phase.
  98   #
  99   LockBoxLib|Include/Library/LockBoxLib.h
 100
 101   ##  @libraryclass  Provide the CPU exception handler.
 102   #
 103   CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
 104
 105   ##  @libraryclass    Provides platform specific display interface.
 106   #
 107   CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
 108
 109   ## @libraryclass   Provides sorting functions
 110   SortLib|Include/Library/SortLib.h
 111
 112   ## @libraryclass   Provides core boot manager functions
 113   UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
 114
 115   ## @libraryclass   Provides core boot manager functions
 116   PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
 117
 118   ## @libraryclass  Provides common interfaces about TPM measurement for other modules.
 119   #
 120   TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
 121
 122   ## @libraryclass  Provides authenticated variable services.
 123   #
 124   AuthVariableLib|Include/Library/AuthVariableLib.h
 125
 126   ## @libraryclass  Provides variable check services and database management.
 127   #
 128   VarCheckLib|Include/Library/VarCheckLib.h
 129
 130   ## @libraryclass  Provides services to get variable error flag and do platform variable cleanup.
 131   #
 132   PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
 133
 134   ## @libraryclass  Provides image decoding service.
 135   #
 136   ImageDecoderLib|Include/Library/ImageDecoderLib.h
 137
 138   ## @libraryclass  Provides interfaces about logo display.
 139   #
 140   BootLogoLib|Include/Library/BootLogoLib.h
 141
 142 [Guids]
 143   ## MdeModule package token space guid
 144   # Include/Guid/MdeModulePkgTokenSpace.h
 145   gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
 146
 147   ## Hob guid for Pcd DataBase
 148   #  Include/Guid/PcdDataBaseHobGuid.h
 149   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
 150
 151   ## Guid for PCD DataBase signature.
 152   # Include/Guid/PcdDataBaseSignatureGuid.h
 153   gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
 154
 155   ## Guid for EDKII implementation GUIDed opcodes
 156   #  Include/Guid/MdeModuleHii.h
 157   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
 158
 159   ## Guid for Framework vfr GUIDed opcodes.
 160   #  Include/Guid/MdeModuleHii.h
 161   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
 162
 163   ## Guid to specify the System Non Volatile FV
 164   #  Include/Guid/SystemNvDataGuid.h
 165   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
 166
 167   ## GUID used as the signature of FTW working block header.
 168   #  Include/Guid/SystemNvDataGuid.h
 169   gEdkiiWorkingBlockSignatureGuid   = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65,  0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
 170
 171   ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
 172   #  Include/Guid/FaultTolerantWrite.h
 173   gEdkiiFaultTolerantWriteGuid      = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83,  0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
 174
 175   ## Guid specify the device is the console out device.
 176   #  Include/Guid/ConsoleOutDevice.h
 177   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 178
 179   ## Guid specify the device is the console in device.
 180   #  Include/Guid/ConsoleInDevice.h
 181   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 182
 183   ## Hob and Variable guid specify the platform memory type information.
 184   #  Include/Guid/MemoryTypeInformation.h
 185   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
 186
 187   ## Capsule update hob and variable guid
 188   #  Include/Guid/CapsuleVendor.h
 189   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
 190
 191   ## Guid specifiy the device is the StdErr device.
 192   #  Include/Guid/StandardErrorDevice.h
 193   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 194
 195   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
 196   #  Include/Guid/VariableFormat.h
 197   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
 198
 199   ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
 200   #  Include/Guid/AuthenticatedVariableFormat.h
 201   gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
 202
 203   #  Include/Guid/VariableIndexTable.h
 204   gEfiVariableIndexTableGuid  = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
 205
 206   ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
 207   #  Include/Guid/SmmVariableCommon.h
 208   gSmmVariableWriteGuid  = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
 209
 210   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
 211   #  Include/Guid/Performance.h
 212   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
 213   gSmmPerformanceProtocolGuid    = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa,  0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
 214   gPerformanceExProtocolGuid     = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1,  0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
 215   gSmmPerformanceExProtocolGuid  = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6,  0x30, 0xe3, 0xe,  0xe5 } }
 216
 217   ## Guid is defined for CRC32 encapsulation scheme.
 218   #  Include/Guid/Crc32GuidedSectionExtraction.h
 219   gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
 220
 221   ## Include/Guid/StatusCodeCallbackGuid.h
 222   gStatusCodeCallbackGuid   = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
 223
 224   ## GUID identifies status code records HOB that originate from the PEI status code
 225   #  Include/Guid/MemoryStatusCodeRecord.h
 226   gMemoryStatusCodeRecordGuid     = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
 227
 228   ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
 229   #  Include/Guid/StatusCodeDataTypeDebug.h
 230   gEfiStatusCodeDataTypeDebugGuid  = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
 231
 232   ##  A configuration Table Guid for Load module at fixed address
 233   #  Include/Guid/LoadModuleAtFixedAddress.h
 234   gLoadFixedAddressConfigurationTableGuid  = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
 235
 236   ## GUID used to store the global debug mask value into an EFI Variable
 237   # Include/Guid/DebugMask.h
 238   gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
 239
 240   ##  Event for the DXE Core to signal idle events
 241   #  Include/Guid/EventIdle.h
 242   gIdleLoopEventGuid  = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
 243
 244   ## Include/Guid/RecoveryDevice.h
 245   gRecoveryOnFatUsbDiskGuid          = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
 246
 247   ## Include/Guid/RecoveryDevice.h
 248   gRecoveryOnFatIdeDiskGuid          = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
 249
 250   ## Include/Guid/RecoveryDevice.h
 251   gRecoveryOnFatFloppyDiskGuid       = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
 252
 253   ## Include/Guid/RecoveryDevice.h
 254   gRecoveryOnDataCdGuid              = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
 255
 256   ## Include/Guid/SmmLockBox.h
 257   gEfiSmmLockBoxCommunicationGuid    = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
 258
 259   ## Include/Guid/AcpiS3Context.h
 260   gEfiAcpiVariableGuid               = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
 261
 262   ## Include/Guid/AcpiS3Context.h
 263   gEfiAcpiS3ContextGuid              = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
 264
 265   ## Include/Guid/BootScriptExecutorVariable.h
 266   gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
 267   gEfiBootScriptExecutorContextGuid  = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
 268
 269   ## Include/Guid/UsbKeyBoardLayout.h
 270   gUsbKeyboardLayoutPackageGuid      = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
 271   gUsbKeyboardLayoutKeyGuid          = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
 272
 273   ## Include/Guid/HiiResourceSampleHii.h
 274   gHiiResourceSamleFormSetGuid       = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
 275
 276   ## Include/Guid/DriverSampleHii.h
 277   gDriverSampleFormSetGuid           = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
 278   gDriverSampleInventoryGuid         = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
 279   gEfiIfrRefreshIdOpGuid             = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
 280
 281   ## Include/Guid/PlatDriOverrideHii.h
 282   gPlatformOverridesManagerGuid      = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
 283
 284   ## Include/Guid/Ip4Config2Hii.h
 285   gIp4Config2NvDataGuid              = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
 286
 287   ## Include/Guid/VlanConfigHii.h
 288   gVlanConfigFormSetGuid             = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
 289
 290   ## Include/Guid/Ip4IScsiConfigHii.h
 291   gIp4IScsiConfigGuid                = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
 292   gIScsiCHAPAuthInfoGuid             = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
 293
 294   ## Include/Guid/ZeroGuid.h
 295   gZeroGuid                          = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
 296
 297   ## Include/Guid/MtcVendor.h
 298   gMtcVendorGuid                     = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
 299
 300   ## Guid for Firmware Performance Data Table (FPDT) implementation.
 301   #  Include/Guid/FirmwarePerformance.h
 302   gEfiFirmwarePerformanceGuid        = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
 303   gFirmwarePerformanceS3PointerGuid  = { 0xdc65adc,  0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
 304
 305   ## Include/Guid/ExitBootServiceFailed.h
 306   gEventExitBootServicesFailedGuid   = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
 307
 308   ## Include/Guid/ConnectConInEvent.h
 309   gConnectConInEventGuid             = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
 310
 311   ## Include/Guid/StatusCodeDataTypeVariable.h
 312   gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
 313
 314   ## Include/Guid/MemoryProfile.h
 315   gEdkiiMemoryProfileGuid              = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
 316
 317   ## Include/Protocol/VarErrorFlag.h
 318   gEdkiiVarErrorFlagGuid               = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
 319
 320   ## GUID indicates the LZMA custom compress/decompress algorithm.
 321   #  Include/Guid/LzmaDecompress.h
 322   gLzmaCustomDecompressGuid      = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
 323   gLzmaF86CustomDecompressGuid     = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
 324
 325   ## Include/Guid/TtyTerm.h
 326   gEfiTtyTermGuid                = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
 327
 328   ## Include/Guid/HiiBootMaintenanceFormset.h
 329   gEfiIfrBootMaintenanceGuid      = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
 330
 331 [Ppis]
 332   ## Include/Ppi/AtaController.h
 333   gPeiAtaControllerPpiGuid       = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
 334
 335   ## Include/Ppi/UsbHostController.h
 336   gPeiUsbHostControllerPpiGuid   = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
 337
 338   ## Include/Ppi/Usb2HostController.h
 339   gPeiUsb2HostControllerPpiGuid  = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22   }}
 340
 341   ## Include/Ppi/UsbController.h
 342   gPeiUsbControllerPpiGuid       = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
 343
 344   ## Include/Ppi/UsbIo.h
 345   gPeiUsbIoPpiGuid               = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
 346
 347   ## Include/Ppi/SecPerformance.h
 348   gPeiSecPerformancePpiGuid      = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
 349
 350   ## Include/Ppi/SmmCommunication.h
 351   gEfiPeiSmmCommunicationPpiGuid   =  { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
 352
 353   ## Include/Ppi/SmmAccess.h
 354   gPeiSmmAccessPpiGuid          =  { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
 355
 356   ## Include/Ppi/SmmControl.h
 357   gPeiSmmControlPpiGuid         =  { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
 358
 359   ## Include/Ppi/PostBootScriptTable.h
 360   gPeiPostScriptTablePpiGuid    =  { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
 361
 362   ## Include/Ppi/SerialPortPei.h
 363   gPeiSerialPortPpiGuid         =  { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
 364
 365   ## Include/Ppi/UfsHostController.h
 366   gEdkiiPeiUfsHostControllerPpiGuid  =  { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
 367
 368 [Protocols]
 369   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
 370   #  Include/Protocol/LoadPe32Image.h
 371   #  This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
 372   #  If developer need implement such functionality, they should use BasePeCoffLib.
 373   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
 374
 375   ## Print protocol defines basic print functions to print the format unicode and ascii string.
 376   # Include/Protocol/Print2.h
 377   gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
 378
 379   ## This protocol defines the generic memory test interfaces in Dxe phase.
 380   # Include/Protocol/GenericMemoryTest.h
 381   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
 382
 383   ## Include/Protocol/Dpc.h
 384   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
 385
 386   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
 387   #  Include/Protocol/FaultTolerantWrite.h
 388   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 389
 390   ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
 391   #  Include/Protocol/SmmFaultTolerantWrite.h
 392   gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
 393
 394   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
 395   #  Include/Protocol/SwapAddressRange.h
 396   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
 397
 398   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
 399   #  Include/Protocol/SmmSwapAddressRange.h
 400   gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
 401
 402   ## This protocol is intended for use as a means to store data in the EFI SMM environment.
 403   #  Include/Protocol/SmmVariableProtocol.h
 404   gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
 405
 406   ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
 407   #  Include/Protocol/VariableLock.h
 408   gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
 409
 410   ## Include/Protocol/VarCheck.h
 411   gEdkiiVarCheckProtocolGuid     = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
 412
 413   ## Include/Protocol/SmmVarCheck.h
 414   gEdkiiSmmVarCheckProtocolGuid  = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
 415
 416   ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
 417   #  Include/Protocol/SmmFirmwareVolumeBlock.h
 418   gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
 419
 420   ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
 421   # Include/Guid/DebugMask.h
 422   gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
 423
 424   ## Include/Protocol/LockBox.h
 425   gEfiLockBoxProtocolGuid        = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
 426
 427   ## Include/Protocol/FormBrowserEx.h
 428   gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
 429
 430   ## Include/Protocol/EbcVmTest.h
 431   gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
 432
 433   ## Include/Protocol/EbcSimpleDebugger.h
 434   gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
 435
 436   ## Include/Protocol/BootLogo.h
 437   gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
 438
 439   ## Include/Protocol/DisplayProtocol.h
 440   gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
 441
 442   ## Include/Protocol/FormBrowserEx2.h
 443   gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
 444
 445   ## Include/Protocol/UfsHostController.h
 446   gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
 447
 448   ## Include/Protocol/EsrtManagement.h
 449   gEsrtManagementProtocolGuid         = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
 450
 451   ## Include/Protocol/SmmExitBootServices.h
 452   gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
 453
 454   ## Include/Protocol/SmmLegacyBoot.h
 455   gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
 456
 457   ## Include/Protocol/SmmReadyToBoot.h
 458   gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
 459
 460   ## Include/Protocol/PlatformLogo.h
 461   gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }
 462
 463 #
 464 # [Error.gEfiMdeModulePkgTokenSpaceGuid]
 465 #   0x80000001 | Invalid value provided.
 466 #   0x80000002 | Reserved bits must be set to zero.
 467 #   0x80000003 | Incorrect progress code provided.
 468 #   0x80000004 | Invalid foreground color specified.
 469 #   0x80000005 | Invalid background color specified.
 470 #   0x80000006 | Incorrect error code provided.
 471 #
 472
 473 [PcdsFeatureFlag]
 474   ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
 475   #   TRUE  - Supports update capsule across a system reset.<BR>
 476   #   FALSE - Does not support update capsule across a system reset.<BR>
 477   # @Prompt Enable update capsule across a system reset.
 478   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
 479
 480   ## Indicates if all PCD PPI services will be enabled.<BR><BR>
 481   #   TRUE  - All PCD PPI services will be produced.<BR>
 482   #   FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
 483   # @Prompt Enable full PEI PCD services.
 484   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
 485
 486   ## Indicates if the Device Path To Text Protocol should be produced by the platform.
 487   #  It can be disabled to save size.<BR><BR>
 488   #   TRUE  - Device Path To Text Protocol will be produced.<BR>
 489   #   FALSE - Device Path To Text Protocol will not be produced.<BR>
 490   # @Prompt Enable Device Path to Text support.
 491   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
 492
 493   ## Indicates if the Device Path From Text Protocol should be produced by the platform.
 494   #  It can be disabled to save size.<BR><BR>
 495   #   TRUE  - Device Path From Text Protocol will be produced.<BR>
 496   #   FALSE - Device Path From Text Protocol will not be produced.<BR>
 497   # @Prompt Enable Device Path From Text support.
 498   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
 499
 500   ## Indicates if the statistics about variable usage will be collected. This information is
 501   #  stored as a vendor configuration table into the EFI system table.
 502   #  Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
 503   #  variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
 504   #   TRUE  - Statistics about variable usage will be collected.<BR>
 505   #   FALSE - Statistics about variable usage will not be collected.<BR>
 506   # @Prompt Enable variable statistics collection.
 507   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
 508
 509   ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
 510   #   TRUE  - Installs Unicode Collation Protocol.<BR>
 511   #   FALSE - Does not install Unicode Collation Protocol.<BR>
 512   # @Prompt Enable Unicode Collation support.
 513   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
 514
 515   ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
 516   #   TRUE  - Installs Unicode Collation 2 Protocol.<BR>
 517   #   FALSE - Does not install Unicode Collation 2 Protocol.<BR>
 518   # @Prompt Enable Unicode Collation 2 support.
 519   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
 520
 521   ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
 522   #  It could be set FALSE to save size.<BR><BR>
 523   #   TRUE  - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
 524   #   FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
 525   # @Prompt Enable ConOut GOP support.
 526   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
 527
 528   ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
 529   #  It could be set FALSE to save size.<BR><BR>
 530   #   TRUE  - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
 531   #   FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
 532   # @Prompt Enable ConOut UGA support.
 533   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
 534
 535   ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
 536   #  This PCD is used to tune PEI phase performance to reduce the search image time.
 537   #  It can be set according to the generated image section type.<BR><BR>
 538   #   TRUE  - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
 539   #   FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
 540   # @Prompt PeiCore search TE section first.
 541   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
 542
 543   ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
 544   #  interrupt to access usb device in the case of absence of usb stack.
 545   #  DUET platform requires the token to be TRUE.<BR><BR>
 546   #   TRUE  - Turn off usb legacy support.<BR>
 547   #   FALSE - Does not turn off usb legacy support.<BR>
 548   # @Prompt Turn off USB legacy support.
 549   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
 550
 551   ## Indicates if HiiImageProtocol will be installed.
 552   #  FALSE is for size reduction.<BR><BR>
 553   #   TRUE  - Installs HiiImageProtocol.<BR>
 554   #   FALSE - Does not install HiiImageProtocol.<BR>
 555   # @Prompt Enable HII image support.
 556   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
 557
 558   ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
 559   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
 560   #  from HII database.<BR><BR>
 561   #   TRUE  - USB KeyBoard Driver will disable the default keyboard layout.<BR>
 562   #   FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
 563   # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
 564   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
 565
 566   ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
 567   #   TRUE  - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
 568   #           the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
 569   #   FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
 570   #           the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
 571   # @Prompt Enable framework backward compatibility support.
 572   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
 573
 574   ## Indicates if HelloWorld Application will print the verbose information.
 575   #  This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
 576   #   TRUE  - HelloWorld Application will print the verbose information.<BR>
 577   #   FALSE - HelloWorld Application will not print the verbose information.<BR>
 578   # @Prompt Enable HelloWorld print.
 579   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
 580
 581   ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
 582   #   TRUE  - Produces FULL FTW protocol services (total six APIs).<BR>
 583   #   FALSE - Only FTW Write service is available.<BR>
 584   # @Prompt Enable FULL FTW services.
 585   gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
 586
 587   ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
 588   #   TRUE  - DXE IPL will support UEFI decompression.<BR>
 589   #   FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
 590   # @Prompt Enable UEFI decompression support in DXE IPL.
 591   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
 592
 593   ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
 594   #   TRUE  - PciBus driver supports the hot plug device.<BR>
 595   #   FALSE - PciBus driver doesn't support the hot plug device.<BR>
 596   # @Prompt Enable PciBus hot plug device support.
 597   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
 598
 599   ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
 600   #   TRUE  - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
 601   #   FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
 602   # @Prompt Enable PCI bridge IO alignment probe.
 603   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
 604
 605   ## Indicates if StatusCode is reported via Serial port.<BR><BR>
 606   #   TRUE  - Reports StatusCode via Serial port.<BR>
 607   #   FALSE - Does not report StatusCode via Serial port.<BR>
 608   # @Prompt Enable StatusCode via Serial port.
 609   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
 610
 611   ## Indicates if StatusCode is stored in memory.
 612   #  The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
 613   #   TRUE  - Stores StatusCode in memory.<BR>
 614   #   FALSE - Does not store StatusCode in memory.<BR>
 615   # @Prompt Enable StatusCode via memory.
 616   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
 617
 618   ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
 619   #   TRUE  - Replays PEI phase StatusCode in DXE phased.<BR>
 620   #   FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
 621   # @Prompt Enable PEI StatusCode replay in DXE phase
 622   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
 623
 624   ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
 625   #   TRUE  - Installs ACPI SDT protocol.<BR>
 626   #   FALSE - Does not install ACPI SDT protocol.<BR>
 627   # @Prompt Enable ACPI SDT support.
 628   gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
 629
 630   ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
 631   #  The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
 632   #   TRUE  - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
 633   #   FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
 634   # @Prompt Enable unaligned PCI I/O support.
 635   gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
 636
 637   ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
 638   #   TRUE  - TEXT statement will always be set to GrayOut.<BR>
 639   #   FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
 640   # @Prompt Always GrayOut TEXT statement.
 641   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
 642
 643   ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
 644   #   TRUE  - The unselectable menu will be set to GrayOut.<BR>
 645   #   FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
 646   # @Prompt GrayOut read only menu.
 647   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
 648
 649   ## Indicates if recovery from IDE disk will be supported.<BR><BR>
 650   #   TRUE  - Supports recovery from IDE disk.<BR>
 651   #   FALSE - Does not support recovery from IDE disk.<BR>
 652   # @Prompt Enable recovery on IDE disk.
 653   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
 654
 655   ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
 656   #   TRUE  - Supports recovery from FAT floppy disk.<BR>
 657   #   FALSE - Does not support recovery from FAT floppy disk.<BR>
 658   # @Prompt Enable recovery on FAT floppy disk.
 659   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
 660
 661   ## Indicates if recovery from data CD will be supported.<BR><BR>
 662   #   TRUE  - Supports recovery from data CD.<BR>
 663   #   FALSE - Does not support recovery from data CD.<BR>
 664   # @Prompt Enable recovery on data CD.
 665   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
 666
 667   ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
 668   #   TRUE  - Supports recovery from USB disk.<BR>
 669   #   FALSE - Does not support recovery from USB disk.<BR>
 670   # @Prompt Enable recovery on FAT USB disk.
 671   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
 672
 673   ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
 674   #   TRUE  - S3 performance data will be supported in ACPI FPDT table.<BR>
 675   #   FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
 676   # @Prompt Enable S3 performance data support.
 677   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
 678
 679 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
 680   ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
 681   #  It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
 682   #  is built in firmware.<BR><BR>
 683   #   TRUE  - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
 684   #   FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
 685   # @Prompt DxeIpl switch to long mode.
 686   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
 687
 688   ## Indicates if DxeIpl should rebuild page tables. This flag only
 689   #  makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
 690   #   TRUE  - DxeIpl will rebuild page tables.<BR>
 691   #   FALSE - DxeIpl will not rebuild page tables.<BR>
 692   # @Prompt DxeIpl rebuild page tables.
 693   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
 694
 695 [PcdsFixedAtBuild]
 696   ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
 697   #  0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
 698   #  0:                  Disable the feature.<BR>
 699   #  Other Value:        Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
 700   # @Prompt Enable LMFA feature.
 701   # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
 702   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
 703
 704   ## Progress Code for OS Loader LoadImage start.<BR><BR>
 705   #  PROGRESS_CODE_OS_LOADER_LOAD   = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
 706   # @Prompt Progress Code for OS Loader LoadImage start.
 707   # @ValidList  0x80000003 | 0x03058000
 708   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
 709
 710   ## Progress Code for OS Loader StartImage start.<BR><BR>
 711   #  PROGRESS_CODE_OS_LOADER_START  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
 712   # @Prompt Progress Code for OS Loader StartImage start.
 713   # @ValidList  0x80000003 | 0x03058001
 714   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
 715
 716   ## Progress Code for S3 Suspend start.<BR><BR>
 717   #  PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000))    = 0x03078000<BR>
 718   # @Prompt Progress Code for S3 Suspend start.
 719   # @ValidList  0x80000003 | 0x03078000
 720   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
 721
 722   ## Progress Code for S3 Suspend end.<BR><BR>
 723   #  PROGRESS_CODE_S3_SUSPEND_END   = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001))    = 0x03078001<BR>
 724   # @Prompt Progress Code for S3 Suspend end.
 725   # @ValidList  0x80000003 | 0x03078001
 726   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
 727
 728   ## Error Code for SetVariable failure.<BR><BR>
 729   #  EDKII_ERROR_CODE_SET_VARIABLE  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
 730   # @Prompt Error Code for SetVariable failure.
 731   # @ValidList  0x80000006 | 0x03058002
 732   gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
 733
 734 [PcdsFixedAtBuild, PcdsPatchableInModule]
 735   ## Dynamic type PCD can be registered callback function for Pcd setting action.
 736   #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
 737   #  for a dynamic PCD used in PEI phase.
 738   # @Prompt Max PEI PCD callback number per PCD entry.
 739   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
 740
 741   ## VPD type PCD  allows a developer to point to an absolute physical address PcdVpdBaseAddress
 742   #  to store PCD value.
 743   # @Prompt VPD base address.
 744   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
 745
 746   ## Maximum number of FV is supported by PeiCore's dispatching.
 747   # @Prompt Maximum number of FV supported by PeiCore.
 748   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
 749
 750   ## Maximum File count in every FV is supported by PeiCore's dispatching.
 751   #  PeiCore supported File type includes PEIM, Combined PEIM and FV.
 752   # @Prompt Maximum File count per FV supported by PeiCore.
 753   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
 754
 755   ## Maximum stack size for PeiCore.
 756   # @Prompt Maximum stack size for PeiCore.
 757   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
 758
 759   ## Maximum PPI count is supported by PeiCore's PPI database.
 760   # @Prompt Maximum PPI count supported by PeiCore.
 761   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
 762
 763   ## The maximum size of a single non-HwErr type variable.
 764   # @Prompt Maximum variable size.
 765   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
 766
 767   ## The maximum size of a single authenticated variable.
 768   # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
 769   # @Prompt Maximum authenticated variable size.
 770   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
 771
 772   ## The maximum size of single hardware error record variable.<BR><BR>
 773   # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
 774   # In IA64 platforms, this value should be larger than 128KB.<BR>
 775   # @Prompt Maximum HwErr variable size.
 776   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
 777
 778   ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
 779   # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
 780   # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
 781   # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
 782   # @Prompt HwErr variable storage size.
 783   gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
 784
 785   ## The size of maximum user NV variable space.<BR><BR>
 786   # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
 787   # If the value is 0, it means user variable share the same NV storage with system variable,
 788   # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
 789   # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
 790   # otherwise the variable will be regarded as user variable.<BR>
 791   #  1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
 792   #  2) Variables managed by Variable driver internally.<BR>
 793   #  3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
 794   #  4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
 795   # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
 796   # @Prompt Maximum user NV variable space size.
 797   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
 798
 799   ## The size of NV variable space reserved at UEFI boottime.<BR><BR>
 800   # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
 801   # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
 802   # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
 803   # Then the common NV variable space size at boottime will be
 804   #  (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
 805   # and the common NV variable space size at runtime will be
 806   #  (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
 807   # @Prompt Boottime reserved NV variable space size.
 808   gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
 809
 810   ## Reclaim variable space at EndOfDxe.<BR><BR>
 811   # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
 812   # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
 813   # @Prompt Reclaim variable space at EndOfDxe.
 814   gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
 815
 816   ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
 817   # @Prompt Variable storage size.
 818   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
 819
 820   ## FFS filename to find the ACPI tables.
 821   # @Prompt FFS name of ACPI tables storage.
 822   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
 823
 824   ## FFS filename to find the capsule coalesce image.
 825   # @Prompt FFS name of capsule coalesce image.
 826   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
 827
 828   ## Maximum number of performance log entries during PEI phase.
 829   # @Prompt Maximum number of PEI performance log entries.
 830   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
 831
 832   ## RTC Update Timeout Value(microsecond).
 833   # @Prompt RTC Update Timeout Value.
 834   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
 835
 836   ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
 837   #   TRUE  - 16550 serial port registers are in MMIO space.<BR>
 838   #   FALSE - 16550 serial port registers are in I/O space.<BR>
 839   # @Prompt Serial port registers use MMIO.
 840   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
 841
 842   ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
 843   #   TRUE  - 16550 serial port hardware flow control will be enabled.<BR>
 844   #   FALSE - 16550 serial port hardware flow control will be disabled.<BR>
 845   # @Prompt Enable serial port hardware flow control.
 846   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
 847
 848   ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
 849   #  This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
 850   #   TRUE  - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
 851   #   FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
 852   # @Prompt Enable serial port cable detetion.
 853   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
 854
 855   ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
 856   # @Prompt Base address of serial port registers.
 857   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
 858
 859   ## Baud rate for the 16550 serial port.  Default is 115200 baud.
 860   # @Prompt Baud rate for serial port.
 861   # @ValidList  0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
 862   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
 863
 864   ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
 865   #    BIT1..BIT0 - Data bits.  00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
 866   #    BIT2       - Stop Bits.  0 = 1 stop bit.  1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
 867   #    BIT5..BIT3 - Parity.  xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
 868   #    BIT7..BIT6 - Reserved.  Must be 0.<BR>
 869   #
 870   #  Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
 871   # @Prompt Serial port Line Control settings.
 872   # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
 873   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
 874
 875   ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
 876   #    BIT0       - FIFO Enable.  0 = Disable FIFOs.  1 = Enable FIFOs.<BR>
 877   #    BIT1       - Clear receive FIFO.  1 = Clear FIFO.<BR>
 878   #    BIT2       - Clear transmit FIFO.  1 = Clear FIFO.<BR>
 879   #    BIT4..BIT3 - Reserved.  Must be 0.<BR>
 880   #    BIT5       - Enable 64-byte FIFO.  0 = Disable 64-byte FIFO.  1 = Enable 64-byte FIFO<BR>
 881   #    BIT7..BIT6 - Reserved.  Must be 0.<BR>
 882   #
 883   #  Default is to enable and clear all FIFOs.<BR>
 884   # @Prompt Serial port FIFO Control settings.
 885   # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
 886   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
 887
 888   ## This setting can override the default TFTP block size. A value of 0 computes
 889   # the default from MTU information. A non-zero value will be used as block size
 890   # in bytes.
 891   # @Prompt TFTP block size.
 892   gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
 893
 894   ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
 895   #  structure. The default value for this PCD is 0, which means that the DXE Core
 896   #  will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
 897   #  boundary as close to the top of memory as feasible.  If this PCD is set to a
 898   #  value other than 0, then the DXE Core will first attempt to allocate the
 899   #  EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
 900   #  by this PCD, and if that allocation fails, retry the allocation on a 4MB
 901   #  boundary as close to the top of memory as feasible.
 902   # @Prompt Maximum Efi System Table Pointer address.
 903   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
 904
 905   ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
 906   #   TRUE  - Shadow PEIM on S3 boot path after memory is ready.<BR>
 907   #   FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
 908   # @Prompt Shadow Peim On S3 Boot.
 909   gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
 910
 911   ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
 912   #  This PCD is used on other boot path except for S3 boot.
 913   #   TRUE  - Shadow PEIM and PeiCore after memory is ready.<BR>
 914   #   FALSE - Not shadow PEIM after memory is ready.<BR>
 915   # @Prompt Shadow Peim and PeiCore on boot
 916   gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
 917
 918   ## The mask is used to control memory profile behavior.<BR><BR>
 919   #  BIT0 - Enable UEFI memory profile.<BR>
 920   #  BIT1 - Enable SMRAM profile.<BR>
 921   # @Prompt Memory Profile Property.
 922   # @Expression  0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0
 923   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
 924
 925   ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
 926   # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
 927   #
 928   # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
 929   #  EfiReservedMemoryType          0x0001<BR>
 930   #  EfiLoaderCode                  0x0002<BR>
 931   #  EfiLoaderData                  0x0004<BR>
 932   #  EfiBootServicesCode            0x0008<BR>
 933   #  EfiBootServicesData            0x0010<BR>
 934   #  EfiRuntimeServicesCode         0x0020<BR>
 935   #  EfiRuntimeServicesData         0x0040<BR>
 936   #  EfiConventionalMemory          0x0080<BR>
 937   #  EfiUnusableMemory              0x0100<BR>
 938   #  EfiACPIReclaimMemory           0x0200<BR>
 939   #  EfiACPIMemoryNVS               0x0400<BR>
 940   #  EfiMemoryMappedIO              0x0800<BR>
 941   #  EfiMemoryMappedIOPortSpace     0x1000<BR>
 942   #  EfiPalCode                     0x2000<BR>
 943   #  EfiPersistentMemory            0x4000<BR>
 944   #  OEM Reserved       0x4000000000000000<BR>
 945   #  OS Reserved        0x8000000000000000<BR>
 946   #
 947   # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
 948   #
 949   # @Prompt Memory profile memory type.
 950   gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
 951
 952   ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
 953   #  information that describes the path that contains zero or more PCI to PCI briges
 954   #  followed by a PCI serial device.  Each array entry is 4-bytes in length.  The
 955   #  first byte is the PCI Device Number, then second byte is the PCI Function Number,
 956   #  and the last two bytes are the offset to the PCI power management capabilities
 957   #  register used to manage the D0-D3 states.  If a PCI power management capabilities
 958   #  register is not present, then the last two bytes in the offset is set to 0.  The
 959   #  array is terminated by an array entry with a PCI Device Number of 0xFF.  For a
 960   #  non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
 961   # @Prompt Pci Serial Device Info
 962   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
 963
 964   ## Serial Port Extended Transmit FIFO Size.  The default is 64 bytes.
 965   # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
 966   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
 967
 968   ## This PCD points to the file name GUID of the BootManagerMenuApp
 969   #  Platform can customize the PCD to point to different application for Boot Manager Menu
 970   # @Prompt Boot Manager Menu File
 971   gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
 972
 973   ## This PCD points to the formset GUID of the driver health management form
 974   #  The form will be popped up by BDS core when there are Configuration Required driver health intances.
 975   #  Platform can customize the PCD to point to different formset.
 976   # @Prompt Driver Health Management Form
 977   gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
 978
 979   ## The number of bytes between registers in serial device.  The default is 1 byte.
 980   # @Prompt Serial Port Register Stride in Bytes
 981   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
 982
 983   ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
 984   # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
 985   # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
 986   # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
 987   gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
 988
 989 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
 990   ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
 991   #  This PCD could be set to 0 then console output would be at max column and max row.
 992   # @Prompt Console output row.
 993   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
 994
 995   ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
 996   #  This PCD could be set to 0 then console output would be at max column and max row.
 997   # @Prompt Console output column.
 998   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
 999
1000   ## This PCD defines the video horizontal resolution.
1001   #  If this PCD is set to 0 then video resolution would be at highest resolution.
1002   # @Prompt Video horizontal resolution.
1003   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
1004
1005   ## This PCD defines the video vertical resolution.
1006   #  If this PCD is set to 0 then video resolution would be at highest resolution.
1007   # @Prompt Video vertical resolution.
1008   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
1009
1010   #  The 4 PCDs below are used to specify the video resolution and text mode of text setup.
1011   #  To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
1012   #  PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
1013   #  Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
1014   #  (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
1015   #  for text setup.
1016
1017   ## Specify the video horizontal resolution of text setup.
1018   # @Prompt Video Horizontal Resolution of Text Setup
1019   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
1020
1021   ## Specify the video vertical resolution of text setup.
1022   # @Prompt Video Vertical Resolution of Text Setup
1023   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
1024
1025   ## Specify the console output column of text setup.
1026   # @Prompt Console Output Column of Text Setup
1027   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
1028
1029   ## Specify the console output row of text setup.
1030   # @Prompt Console Output Row of Text Setup
1031   gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
1032
1033 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1034   ## UART clock frequency is for the baud rate configuration.
1035   # @Prompt Serial Port Clock Rate.
1036   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
1037
1038   ## This PCD points to the front page formset GUID
1039   #  Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
1040   # @Prompt Front Page Formset.
1041   gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
1042
1043   ## Base address of the NV variable range in flash device.
1044   # @Prompt Base address of flash NV variable range.
1045   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
1046
1047   ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
1048   #  The root cause is that variable driver will use FTW protocol to reclaim variable region.
1049   #  If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1050   #  be reflushed through the manner of fault tolerant write.
1051   # @Prompt Size of flash NV variable range.
1052   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
1053
1054   ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1055   # @Prompt Base address of flash FTW spare block range.
1056   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
1057
1058   ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
1059   # The root cause is that variable driver will use FTW protocol to reclaim variable region.
1060   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1061   # be reflushed through the manner of fault tolerant write.
1062   # @Prompt Size of flash FTW spare block range.
1063   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
1064
1065   ## Base address of the FTW working block range in flash device.
1066   # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1067   # @Prompt Base address of flash FTW working block range.
1068   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
1069
1070   ## Size of the FTW working block range.
1071   # If the value is less than one block size, the work space range should not span blocks.
1072   # If the value is larger than one block size, it should be block size aligned.
1073   # @Prompt Size of flash FTW working block range.
1074   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
1075
1076   ## 64-bit Base address of the NV variable range in flash device.
1077   # @Prompt 64-bit Base address of flash NV variable range.
1078   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
1079
1080   ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1081   # @Prompt 64-bit Base address of flash FTW spare block range.
1082   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
1083
1084   ## 64-bit Base address of the FTW working block range in flash device.
1085   # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1086   # @Prompt 64-bit Base address of flash FTW working block range.
1087   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
1088
1089   ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
1090   #  The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
1091   # @Prompt Reserved memory range for EMU variable NV storage.
1092   gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
1093
1094   ## This PCD defines the times to print hello world string.
1095   #  This PCD is a sample to explain UINT32 PCD usage.
1096   # @Prompt HellowWorld print times.
1097   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
1098
1099   ## This PCD defines the HelloWorld print string.
1100   #  This PCD is a sample to explain String typed PCD usage.
1101   # @Prompt HelloWorld print string.
1102   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
1103
1104   ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
1105   #  The default max size is 100MB (0x6400000) for more than one large capsule images.
1106   # @Prompt Max size of populated capsule.
1107   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
1108
1109   ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
1110   #  The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
1111   # @Prompt Max size of non-populated capsule.
1112   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
1113
1114   ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
1115   # @Prompt Firmware vendor.
1116   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
1117
1118   ## Firmware revision that is the default revision filled into the EFI System Table.
1119   # @Prompt Firmware revision.
1120   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
1121
1122   ## Null-terminated Unicode string that describes the firmware version.
1123   # @Prompt Firmware version string.
1124   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
1125
1126   ## Null-terminated Unicode string that contains the date the firmware was released
1127   # @Prompt Firmware release data string.
1128   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
1129
1130   ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
1131   #  (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
1132   #  The default value in PeiPhase is 1 KBytes.<BR>
1133   #  The default value in DxePhase is 128 KBytes.<BR>
1134   # @Prompt StatusCode memory size.
1135   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
1136
1137   ## Indicates if to reset system when memory type information changes.<BR><BR>
1138   #   TRUE  - Resets system when memory type information changes.<BR>
1139   #   FALSE - Does not reset system when memory type information changes.<BR>
1140   # @Prompt Reset on memory type information change.
1141   gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
1142
1143   ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
1144   #  Only following values defined in UEFI specification are valid:<BR><BR>
1145   #  0x00 (EFI_BLACK)<BR>
1146   #  0x01 (EFI_BLUE)<BR>
1147   #  0x02 (EFI_GREEN)<BR>
1148   #  0x03 (EFI_CYAN)<BR>
1149   #  0x04 (EFI_RED)<BR>
1150   #  0x05 (EFI_MAGENTA)<BR>
1151   #  0x06 (EFI_BROWN)<BR>
1152   #  0x07 (EFI_LIGHTGRAY)<BR>
1153   #  0x08 (EFI_DARKGRAY)<BR>
1154   #  0x09 (EFI_LIGHTBLUE)<BR>
1155   #  0x0A (EFI_LIGHTGREEN)<BR>
1156   #  0x0B (EFI_LIGHTCYAN)<BR>
1157   #  0x0C (EFI_LIGHTRED)<BR>
1158   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1159   #  0x0E (EFI_YELLOW)<BR>
1160   #  0x0F (EFI_WHITE)<BR>
1161   # @Prompt Foreground color for browser subtile.
1162   # @ValidRange 0x80000004 | 0x00 - 0x0F
1163   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
1164
1165   ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
1166   #  Only following values defined in UEFI specification are valid:<BR><BR>
1167   #  0x00 (EFI_BLACK)<BR>
1168   #  0x01 (EFI_BLUE)<BR>
1169   #  0x02 (EFI_GREEN)<BR>
1170   #  0x03 (EFI_CYAN)<BR>
1171   #  0x04 (EFI_RED)<BR>
1172   #  0x05 (EFI_MAGENTA)<BR>
1173   #  0x06 (EFI_BROWN)<BR>
1174   #  0x07 (EFI_LIGHTGRAY)<BR>
1175   #  0x08 (EFI_DARKGRAY)<BR>
1176   #  0x09 (EFI_LIGHTBLUE)<BR>
1177   #  0x0A (EFI_LIGHTGREEN)<BR>
1178   #  0x0B (EFI_LIGHTCYAN)<BR>
1179   #  0x0C (EFI_LIGHTRED)<BR>
1180   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1181   #  0x0E (EFI_YELLOW)<BR>
1182   #  0x0F (EFI_WHITE)<BR>
1183   # @Prompt Foreground color for browser field.
1184   # @ValidRange 0x80000004 | 0x00 - 0x0F
1185   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
1186
1187   ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
1188   #  The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
1189   #  0x00 (EFI_BLACK)<BR>
1190   #  0x01 (EFI_BLUE)<BR>
1191   #  0x02 (EFI_GREEN)<BR>
1192   #  0x03 (EFI_CYAN)<BR>
1193   #  0x04 (EFI_RED)<BR>
1194   #  0x05 (EFI_MAGENTA)<BR>
1195   #  0x06 (EFI_BROWN)<BR>
1196   #  0x07 (EFI_LIGHTGRAY)<BR>
1197   #  0x08 (EFI_DARKGRAY)<BR>
1198   #  0x09 (EFI_LIGHTBLUE)<BR>
1199   #  0x0A (EFI_LIGHTGREEN)<BR>
1200   #  0x0B (EFI_LIGHTCYAN)<BR>
1201   #  0x0C (EFI_LIGHTRED)<BR>
1202   #  0x0D (EFI_LIGHTMAGENTA)<BR>
1203   #  0x0E (EFI_YELLOW)<BR>
1204   #  0x0F (EFI_WHITE)<BR>
1205   # @Prompt Foreground color for highlighted browser field.
1206   # @ValidRange 0x80000004 | 0x00 - 0x0F
1207   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
1208
1209   ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
1210   #  The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
1211   #  0x00 (EFI_BACKGROUND_BLACK)<BR>
1212   #  0x10 (EFI_BACKGROUND_BLUE)<BR>
1213   #  0x20 (EFI_BACKGROUND_GREEN)<BR>
1214   #  0x30 (EFI_BACKGROUND_CYAN)<BR>
1215   #  0x40 (EFI_BACKGROUND_RED)<BR>
1216   #  0x50 (EFI_BACKGROUND_MAGENTA)<BR>
1217   #  0x60 (EFI_BACKGROUND_BROWN)<BR>
1218   #  0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
1219   # @Prompt Background color for highlighted browser field.
1220   # @ValidList  0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
1221   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
1222
1223   ## Time in second to delay for SATA devices to spin-up for recovery.
1224   # @Prompt SATA spin-up delay time in second for recovery path.
1225   gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
1226
1227   ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
1228   #  to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
1229   #  When changing the value of this PCD, the platform developer should make sure the memory size is
1230   #  large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
1231   # @Prompt Reserved page number for S3 Boot Script Runtime Table.
1232   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
1233
1234   ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
1235   #  The default size is 32K. When changing the value of this PCD, the platform developer should
1236   #  make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
1237   # @Prompt Stack size for CapsulePei transfer to long mode.
1238   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
1239
1240   ## Indicates if 1G page table will be enabled.<BR><BR>
1241   #   TRUE  - 1G page table will be enabled.<BR>
1242   #   FALSE - 1G page table will not be enabled.<BR>
1243   # @Prompt Enable 1G page table support.
1244   gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
1245
1246   ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
1247   #   TRUE  - Single Root I/O virtualization is supported.<BR>
1248   #   FALSE - Single Root I/O virtualization is not supported.<BR>
1249   # @Prompt Enable SRIOV support.
1250   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
1251
1252   ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
1253   #   TRUE  - Alternative Routing-ID is supported.<BR>
1254   #   FALSE - Alternative Routing-ID is not supported.<BR>
1255   # @Prompt Enable ARI support.
1256   gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
1257
1258   ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
1259   #   TRUE  - Multi Root I/O virtualization is supported.<BR>
1260   #   FALSE - Multi Root I/O virtualization is not supported.<BR>
1261   # @Prompt Enable MRIOV support.
1262   gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
1263
1264   ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
1265   #  BITN set indicates 2 of n+12 power<BR>
1266   #  BIT0 set indicates 4KB alignment<BR>
1267   #  BIT1 set indicates 8KB alignment<BR>
1268   # @Prompt SRIOV system page size.
1269   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
1270
1271   ## SMBIOS version.
1272   # @Prompt SMBIOS version.
1273   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055
1274
1275   ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1276   # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1277   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A
1278
1279   ## SMBIOS produce method.
1280   #  BIT0 set indicates 32-bit entry point and table are produced.<BR>
1281   #  BIT1 set indicates 64-bit entry point and table are produced.<BR>
1282   # @Prompt The policy to produce SMBIOS entry point and table.
1283   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
1284
1285   ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
1286   #  the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
1287   # @Prompt Pad size for extension FPDT boot records.
1288   gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
1289
1290   ## Indicates if ConIn device are connected on demand.<BR><BR>
1291   #   TRUE  - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
1292   #           by Consplitter should be called before any real key read operation.<BR>
1293   #   FALSE - ConIn device may be connected normally during BDS.<BR>
1294   # @Prompt ConIn connect on demand.
1295   gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
1296
1297   ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
1298   #   TRUE  - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
1299   #   FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
1300   # @Prompt Enable ATA S.M.A.R.T feature.
1301   gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
1302
1303   ## Indicates if full PCI enumeration is disabled.<BR><BR>
1304   #   TRUE  - Full PCI enumeration is disabled.<BR>
1305   #   FALSE - Full PCI enumeration is not disabled.<BR>
1306   # @Prompt Disable full PCI enumeration.
1307   gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
1308
1309   ## Disk I/O - Number of Data Buffer block.
1310   # Define the size in block of the pre-allocated buffer. It provide better
1311   # performance for large Disk I/O requests.
1312   # @Prompt Disk I/O - Number of Data Buffer block.
1313   gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
1314
1315   ## This PCD specifies the PCI-based UFS host controller mmio base address.
1316   # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
1317   # host controllers, their mmio base addresses are calculated one by one from this base address.
1318   # @Prompt Mmio base address of pci-based UFS host controller.
1319   gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
1320
1321   ## Specify Max ESRT cache entry number supported for FMP instances
1322   #
1323   # @Prompt Max FMP ESRT entry number to be synced & cached in repository.
1324   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
1325
1326   ## Specify Max ESRT cache entry number supported for Non FMP instances
1327   #
1328   # @Prompt Max Non-FMP ESRT entry number to be cached in repository.
1329   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
1330
1331   ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
1332   #
1333   # @Prompt Flag to request system reboot after processing capsule.
1334   gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
1335
1336   ## Publish PropertiesTable or not.
1337   #
1338   # If this PCD is TRUE, DxeCore publishs PropertiesTable.
1339   # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
1340   # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
1341   # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
1342   # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
1343   #
1344   # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
1345   #   1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
1346   #      use EfiRuntimeServicesData for runtime driver PE image header and other section.
1347   #   2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
1348   #   3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
1349   #   4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
1350   #
1351   # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
1352   # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
1353   # section. If PE code/data sections are merged, the result is unpredictable.
1354   #
1355   # @Prompt Publish UEFI PropertiesTable.
1356   gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|TRUE|BOOLEAN|0x0000006e
1357
1358   ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
1359   # @Prompt Default OEM ID for ACPI table creation.
1360   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
1361
1362   ## Default OEM Table ID for ACPI table creation, it is "EDK2    ".
1363   # @Prompt Default OEM Table ID for ACPI table creation.
1364   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
1365
1366   ## Default OEM Revision for ACPI table creation.
1367   # @Prompt Default OEM Revision for ACPI table creation.
1368   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
1369
1370   ## Default Creator ID for ACPI table creation.
1371   # @Prompt Default Creator ID for ACPI table creation.
1372   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
1373
1374   ## Default Creator Revision for ACPI table creation.
1375   # @Prompt Default Creator Revision for ACPI table creation.
1376   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
1377
1378   ## Indicates if to set NX for stack.<BR><BR>
1379   #  For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
1380   #  For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
1381   #  IA32 PAE is supported and Execute Disable Bit is available.<BR>
1382   #   TRUE  - to set NX for stack.<BR>
1383   #   FALSE - Not to set NX for stack.<BR>
1384   # @Prompt Set NX for stack.
1385   gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
1386
1387 [PcdsPatchableInModule]
1388   ## Specify memory size with page number for PEI code when
1389   #  Loading Module at Fixed Address feature is enabled.
1390   #  The value will be set by the build tool.
1391   # @Prompt LMFA PEI code page number.
1392   # @ValidList  0x80000001 | 0
1393   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
1394
1395   ## Specify memory size with page number for DXE boot time code when
1396   #  Loading Module at Fixed Address feature is enabled.
1397   #  The value will be set by the build tool.
1398   # @Prompt LMFA DXE boot code page number.
1399   # @ValidList  0x80000001 | 0
1400   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
1401
1402   ## Specify memory size with page number for DXE runtime code when
1403   #  Loading Module at Fixed Address feature is enabled.
1404   #  The value will be set by the build tool.
1405   # @Prompt LMFA DXE runtime code page number.
1406   # @ValidList  0x80000001 | 0
1407   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
1408
1409   ## Specify memory size with page number for SMM code when
1410   #  Loading Module at Fixed Address feature is enabled.
1411   #  The value will be set by the build tool.
1412   # @Prompt LMFA SMM code page number.
1413   # @ValidList  0x80000001 | 0
1414   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
1415
1416 [PcdsDynamic, PcdsDynamicEx]
1417   ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
1418   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1419   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1420   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1421   # @Prompt S3 Boot Script Table Private Data pointer.
1422   # @ValidList  0x80000001 | 0x0
1423   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
1424
1425   ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
1426   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1427   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1428   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1429   # @Prompt S3 Boot Script Table Private Smm Data pointer.
1430   # @ValidList  0x80000001 | 0x0
1431   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
1432
1433   ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
1434   #  Virtual to Physical mapping according to the processor physical address bits.
1435   # @Prompt Identify Mapping Page Table pointer.
1436   # @ValidList  0x80000001 | 0x0
1437   gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
1438
1439 [UserExtensions.TianoCore."ExtraFiles"]
1440   MdeModulePkgExtra.uni