MdeModulePkg/MdeModulePkg.dec

   1 ## @file  MdeModulePkg.dec
   2 #
   3 # This package provides the modules that conform to UEFI/PI Industry standards.
   4 # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
   5 # and libraries instances, which are used for those modules.
   6 #
   7 # Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>
   8 # This program and the accompanying materials are licensed and made available under
   9 # the terms and conditions of the BSD License that accompanies this distribution.
  10 # The full text of the license may be found at
  11 # http://opensource.org/licenses/bsd-license.php.
  12 #
  13 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  15 #
  16 ##
  17
  18
  19 [Defines]
  20   DEC_SPECIFICATION              = 0x00010005
  21   PACKAGE_NAME                   = MdeModulePkg
  22   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  23   PACKAGE_VERSION                = 0.92
  24
  25 [Includes]
  26   Include
  27
  28
  29 [LibraryClasses]
  30   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  31   #   This library is only intended to be used by UEFI network stack modules.
  32   IpIoLib|Include/Library/IpIoLib.h
  33
  34   ##  @libraryclass  Basic function for UEFI network stack.
  35   #   This library is only intended to be used by UEFI network stack modules.
  36   NetLib|Include/Library/NetLib.h
  37
  38   ##  @libraryclass  The helper routines to access UDP service.
  39   #   This library is only intended to be used by UEFI network stack modules.
  40   UdpIoLib|Include/Library/UdpIoLib.h
  41
  42   ##  @libraryclass  The helper routines to access TCP service.
  43   #   This library is only intended to be used by UEFI network stack modules.
  44   TcpIoLib|Include/Library/TcpIoLib.h
  45
  46   ##  @libraryclass  Defines a set of methods to reset whole system.
  47   ResetSystemLib|Include/Library/ResetSystemLib.h
  48
  49   ##  @libraryclass  Defines a set of methods related do S3 mode.
  50   #   This library class is no longer used and modules using this library should
  51   #   directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
  52   S3Lib|Include/Library/S3Lib.h
  53
  54   ##  @libraryclass  Defines a set of methods related recovery mode.
  55   #   This library class is no longer used and modules using this library should
  56   #   directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
  57   RecoveryLib|Include/Library/RecoveryLib.h
  58
  59   ##  @libraryclass  Provides HII related functions.
  60   HiiLib|Include/Library/HiiLib.h
  61
  62   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  63   CapsuleLib|Include/Library/CapsuleLib.h
  64
  65   ##  @libraryclass  Library for Deferred Procedure Calls.
  66   DpcLib|Include/Library/DpcLib.h
  67
  68   ##  @libraryclass    Provides global variables that are pointers
  69   #   to the UEFI HII related protocols.
  70   #
  71   UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
  72
  73   ##  @libraryclass    Provides a set of interfaces to abstract the policy of security measurement.
  74   #
  75   SecurityManagementLib|Include/Library/SecurityManagementLib.h
  76
  77   ##  @libraryclass  OEM status code libary is used to report status code to OEM device.
  78   #
  79   OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
  80
  81   ##  @libraryclass  Debug Agent is used to provide soft debug capability.
  82   #
  83   DebugAgentLib|Include/Library/DebugAgentLib.h
  84
  85   ##  @libraryclass  Provide platform specific hooks.
  86   #
  87   PlatformHookLib|Include/Library/PlatformHookLib.h
  88
  89   ##  @libraryclass  Provide platform specific hooks for SMM core.
  90   #
  91   SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
  92
  93   ##  @libraryclass  Provide capability to maintain the data integrity cross S3 phase.
  94   #
  95   LockBoxLib|Include/Library/LockBoxLib.h
  96
  97   ##  @libraryclass  Provide the CPU exception handler.
  98   #
  99   CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
 100
 101 [Guids]
 102   ## MdeModule package token space guid
 103   # Include/Guid/MdeModulePkgTokenSpace.h
 104   gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
 105
 106   ## Hob guid for Pcd DataBase
 107   #  Include/Guid/PcdDataBaseHobGuid.h
 108   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
 109
 110   ## Guid for EDKII implementation GUIDed opcodes
 111   #  Include/Guid/MdeModuleHii.h
 112   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
 113
 114   ## Guid for Framework vfr GUIDed opcodes.
 115   #  Include/Guid/MdeModuleHii.h
 116   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
 117
 118   ## Guid to specify the System Non Volatile FV
 119   #  Include/Guid/SystemNvDataGuid.h
 120   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
 121
 122   ## GUID used as the signature of FTW working block header.
 123   #  Include/Guid/SystemNvDataGuid.h
 124   gEdkiiWorkingBlockSignatureGuid   = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65,  0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
 125
 126   ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
 127   #  Include/Guid/FaultTolerantWrite.h
 128   gEdkiiFaultTolerantWriteGuid      = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83,  0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
 129
 130   ## Guid specify the device is the console out device.
 131   #  Include/Guid/ConsoleOutDevice.h
 132   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 133
 134   ## Guid specify the device is the console in device.
 135   #  Include/Guid/ConsoleInDevice.h
 136   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 137
 138   ## Hob and Variable guid specify the platform memory type information.
 139   #  Include/Guid/MemoryTypeInformation.h
 140   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
 141
 142   ## Capsule update hob and variable guid
 143   #  Include/Guid/CapsuleVendor.h
 144   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
 145
 146   ## Guid specifiy the device is the StdErr device.
 147   #  Include/Guid/StandardErrorDevice.h
 148   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 149
 150   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
 151   #  Include/Guid/VariableFormat.h
 152   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
 153
 154   #  Include/Guid/VariableIndexTable.h
 155   gEfiVariableIndexTableGuid  = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
 156
 157   ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
 158   #  Include/Guid/SmmVariableCommon.h
 159   gSmmVariableWriteGuid  = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
 160
 161   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
 162   #  Include/Guid/Performance.h
 163   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
 164   gSmmPerformanceProtocolGuid    = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa,  0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
 165   gPerformanceExProtocolGuid     = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1,  0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
 166   gSmmPerformanceExProtocolGuid  = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6,  0x30, 0xe3, 0xe,  0xe5 } }
 167
 168   ## Guid is defined for CRC32 encapsulation scheme.
 169   #  Include/Guid/Crc32GuidedSectionExtraction.h
 170   gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
 171
 172   ## Include/Guid/NicIp4ConfigNvData.h
 173   gEfiNicIp4ConfigVariableGuid   = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
 174
 175   ## Include/Guid/StatusCodeCallbackGuid.h
 176   gStatusCodeCallbackGuid   = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
 177
 178   ## GUID identifies status code records HOB that originate from the PEI status code
 179   #  Include/Guid/MemoryStatusCodeRecord.h
 180   gMemoryStatusCodeRecordGuid     = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
 181
 182   ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
 183   #  Include/Guid/StatusCodeDataTypeDebug.h
 184   gEfiStatusCodeDataTypeDebugGuid  = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
 185
 186   ##  A configuration Table Guid for Load module at fixed address
 187   #  Include/Guid/LoadModuleAtFixedAddress.h
 188   gLoadFixedAddressConfigurationTableGuid  = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
 189
 190   ## GUID used to store the global debug mask value into an EFI Variable
 191   # Include/Guid/DebugMask.h
 192   gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
 193
 194   ##  Event for the DXE Core to signal idle events
 195   #  Include/Guid/EventIdle.h
 196   gIdleLoopEventGuid  = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
 197
 198   ## Include/Guid/RecoveryDevice.h
 199   gRecoveryOnFatUsbDiskGuid          = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
 200
 201   ## Include/Guid/RecoveryDevice.h
 202   gRecoveryOnFatIdeDiskGuid          = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
 203
 204   ## Include/Guid/RecoveryDevice.h
 205   gRecoveryOnFatFloppyDiskGuid       = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
 206
 207   ## Include/Guid/RecoveryDevice.h
 208   gRecoveryOnDataCdGuid              = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
 209
 210   ## Include/Guid/SmmLockBox.h
 211   gEfiSmmLockBoxCommunicationGuid    = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
 212
 213   ## Include/Guid/AcpiS3Context.h
 214   gEfiAcpiVariableGuid               = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
 215
 216   ## Include/Guid/AcpiS3Context.h
 217   gEfiAcpiS3ContextGuid              = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
 218
 219   ## Include/Guid/BootScriptExecutorVariable.h
 220   gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
 221   gEfiBootScriptExecutorContextGuid  = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
 222
 223   ## Include/Guid/UsbKeyBoardLayout.h
 224   gUsbKeyboardLayoutPackageGuid      = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
 225   gUsbKeyboardLayoutKeyGuid          = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
 226
 227   ## Include/Guid/HiiResourceSampleHii.h
 228   gHiiResourceSamleFormSetGuid       = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
 229
 230   ## Include/Guid/DriverSampleHii.h
 231   gDriverSampleFormSetGuid           = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
 232   gDriverSampleInventoryGuid         = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
 233   gEfiIfrRefreshIdOpGuid             = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
 234
 235   ## Include/Guid/PlatDriOverrideHii.h
 236   gPlatformOverridesManagerGuid      = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
 237
 238   ## Include/Guid/Ip4ConfigHii.h
 239   gNicIp4ConfigNvDataGuid            = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}
 240
 241   ## Include/Guid/VlanConfigHii.h
 242   gVlanConfigFormSetGuid             = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
 243
 244   ## Include/Guid/Ip4IScsiConfigHii.h
 245   gIp4IScsiConfigGuid                = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
 246   gIScsiCHAPAuthInfoGuid             = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
 247
 248   ## Include/Guid/ZeroGuid.h
 249   gZeroGuid                          = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
 250
 251   ## Include/Guid/MtcVendor.h
 252   gMtcVendorGuid                     = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
 253
 254   ## Guid for Firmware Performance Data Table (FPDT) implementation.
 255   #  Include/Guid/FirmwarePerformance.h
 256   gEfiFirmwarePerformanceGuid        = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
 257   gFirmwarePerformanceS3PointerGuid  = { 0xdc65adc,  0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
 258
 259   ## Include/Guid/ExitBootServiceFailed.h
 260   gEventExitBootServicesFailedGuid   = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
 261
 262   ## Include/Guid/ConnectConInEvent.h
 263   gConnectConInEventGuid             = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
 264
 265 [Ppis]
 266   ## Include/Ppi/AtaController.h
 267   gPeiAtaControllerPpiGuid       = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
 268
 269   ## Include/Ppi/UsbHostController.h
 270   gPeiUsbHostControllerPpiGuid   = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
 271
 272   ## Include/Ppi/Usb2HostController.h
 273   gPeiUsb2HostControllerPpiGuid  = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22   }}
 274
 275   ## Include/Ppi/UsbController.h
 276   gPeiUsbControllerPpiGuid       = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
 277
 278   ## Include/Ppi/UsbIo.h
 279   gPeiUsbIoPpiGuid               = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
 280
 281   ## Include/Ppi/Capsule.h
 282   gPeiCapsulePpiGuid             = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
 283
 284   ## Include/Ppi/SecPerformance.h
 285   gPeiSecPerformancePpiGuid      = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
 286
 287   ## Include/Ppi/SmmCommunication.h
 288   gEfiPeiSmmCommunicationPpiGuid   =  { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
 289
 290   ## Include/Ppi/SmmAccess.h
 291   gPeiSmmAccessPpiGuid          =  { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
 292
 293   ## Include/Ppi/SmmControl.h
 294   gPeiSmmControlPpiGuid         =  { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
 295
 296   ## Include/Ppi/PostBootScriptTable.h
 297   gPeiPostScriptTablePpiGuid    =  { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
 298
 299 [Protocols]
 300   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
 301   #  Include/Protocol/LoadPe32Image.h
 302   #  This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
 303   #  If developer need implement such functionality, they should use BasePeCoffLib.
 304   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
 305
 306   ## Print protocol defines basic print functions to print the format unicode and ascii string.
 307   # Include/Protocol/Print2.h
 308   gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
 309
 310   ## This protocol defines the generic memory test interfaces in Dxe phase.
 311   # Include/Protocol/GenericMemoryTest.h
 312   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
 313
 314   ## Include/Protocol/Dpc.h
 315   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
 316
 317   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
 318   #  Include/Protocol/FaultTolerantWrite.h
 319   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 320
 321   ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
 322   #  Include/Protocol/SmmFaultTolerantWrite.h
 323   gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
 324
 325   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
 326   #  Include/Protocol/SwapAddressRange.h
 327   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
 328
 329   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
 330   #  Include/Protocol/SmmSwapAddressRange.h
 331   gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
 332
 333   ## This protocol is intended for use as a means to store data in the EFI SMM environment.
 334   #  Include/Protocol/SmmVariableProtocol.h
 335   gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
 336
 337   ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
 338   #  Include/Protocol/VariableLock.h
 339   gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
 340
 341   ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
 342   #  Include/Protocol/SmmFirmwareVolumeBlock.h
 343   gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
 344
 345   ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
 346   # Include/Guid/DebugMask.h
 347   gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
 348
 349   ## Include/Protocol/LockBox.h
 350   gEfiLockBoxProtocolGuid        = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
 351
 352   ## Include/Protocol/FormBrowserEx.h
 353   gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
 354
 355   ## Include/Protocol/EbcVmTest.h
 356   gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
 357
 358   ## Include/Protocol/EbcSimpleDebugger.h
 359   gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
 360
 361   ## Include/Protocol/BootLogo.h
 362   gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
 363
 364 [PcdsFeatureFlag]
 365   ## Indicate whether platform can support update capsule across a system reset
 366   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
 367
 368   ## This feature flag can be used to enable or disable all PCD PEIM services.
 369   #  If TRUE, all PCD PPI services will be produced.
 370   #  If FALSE, the minimal PCD PEIM services (only GetService) will be produced.
 371   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
 372
 373   ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
 374   #  It can be disabled to save size.
 375   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
 376
 377   ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
 378   #  It can be disabled to save size.
 379   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
 380
 381   ## If TRUE, enable the statistic functionality about variable usage. Such information is
 382   #  stored as a vendor configuration table into the EFI system table.
 383   #  If user wants to use VariableInfo application in MdeModulePkg\Application directory to get
 384   #  variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can
 385   #  not output useful info.
 386   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
 387
 388   ## If TRUE, Unicode Collation Protocol will be installed.
 389   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
 390
 391   ## If TRUE, Unicode Collation 2 Protocol will be installed.
 392   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
 393
 394   ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
 395   #  It could be set FALSE to save size.
 396   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
 397
 398   ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
 399   #  It could be set FALSE to save size.
 400   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
 401
 402   ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.
 403   #  If TE section is not found, then PeiCore will search PE section.
 404   #  If FALSE, PeiCore will first search PE section from PEIM to load the image.
 405   #  This PCD is used to tune Pei phase performance to reduce the search image time.
 406   #  It can be set according to the generated image section type.
 407   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
 408
 409   ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI
 410   #  interrupt to access usb device in the case of absence of usb stack.
 411   #  DUET platform requires the token to be TRUE.
 412   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
 413
 414   ## If TRUE, HiiImageProtocol will be installed.
 415   #  FALSE is for size reduction.
 416   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
 417
 418   ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
 419   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
 420   #  from HII database.
 421   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
 422
 423   ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
 424   #  If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
 425   #  This is used to provide backward compatibility support to Framework HII and Framework FvHob.
 426   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
 427
 428   ## If TRUE, HelloWorld Application will print the verbose information.
 429   #  This PCD is a sample to explain FeatureFlag PCD usage.
 430   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
 431
 432   ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.
 433   #  If FASLE, only FTW Write service is available.
 434   gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
 435
 436   ## If TRUE, DXE IPL must support the UEFI decompression algorithm.
 437   #  If FALSE, DXE IPL will not support UEFI decompression to save space.
 438   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
 439
 440   ## This PCD specifies whether PciBus supports the hot plug device.
 441   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
 442
 443   ## This PCD specifies whether the PCI bus driver probes non-standard,
 444   #  such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
 445   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
 446   ## This PCD specifies whether StatusCode is reported via Serial port.
 447   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
 448
 449   ## This PCD specifies whether StatusCode is stored in memory.
 450   #  The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
 451   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
 452
 453   ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.
 454   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
 455
 456   ## This PCD specified whether ACPI SDT protocol is installed.
 457   gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
 458
 459   ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
 460   #  If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.
 461   #  The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.
 462   gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
 463
 464   ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.
 465   #  If TRUE,  TEXT statement will always be set to GrayOut.
 466   #  If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
 467   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
 468
 469   ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser.
 470   # If TRUE, the unselectable menu will be set to GrayOut.
 471   # If FALSE, the menu will be show as normal menu entry even if it is not selectable.
 472   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
 473
 474   ## If TRUE, recovery from IDE disk will be supported.
 475   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
 476
 477   ## If TRUE, recovery from FAT floppy disk will be supported.
 478   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
 479
 480   ## If TRUE, recovery from data CD will be supported.
 481   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
 482
 483   ## If TRUE, recovery from FAT USB disk will be supported.
 484   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
 485
 486   ## If TRUE, S3 performance data will be supported in ACPI FPDT table.
 487   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
 488
 489 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
 490   ##
 491   # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
 492   # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;
 493   # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
 494   # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
 495   # is built in firmware.
 496   #
 497   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
 498
 499   ##
 500   # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only
 501   # makes sense in the case where the DxeIpl and the DxeCore are both X64.
 502   #
 503   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
 504
 505 [PcdsFixedAtBuild]
 506   ## Dynamic type PCD can be registered callback function for Pcd setting action.
 507   #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
 508   #  for a dynamic PCD used in PEI phase.
 509   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
 510
 511   ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
 512   #  to store PCD value.
 513   #
 514   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
 515
 516   ## Maximum number of FV is supported by PeiCore's dispatching.
 517   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
 518
 519   ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
 520   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
 521
 522   ## Maximum stack size for PeiCore.
 523   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
 524
 525   ## Maximum PPI count is supported by PeiCore's PPI database.
 526   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
 527
 528   ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize
 529   #  The root cause is that variable driver will use FTW protocol to reclaim variable region.
 530   #  If the length of variable region is larger than FTW spare size, it means the whole variable region can not
 531   #  be reflushed through the manner of fault tolerant write.
 532   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
 533
 534   ## The maximum size of single common variable, that is non-HwErr type varible.
 535   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
 536
 537   ## The maximum size of single hardware error record variable.
 538   # In IA32/X64 platforms, this value should be larger than 1KB.
 539   # In IA64 platforms, this value should be larger than 128KB.
 540   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
 541
 542   ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize
 543   # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
 544   # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.
 545   # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
 546   gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
 547
 548   ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.
 549   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
 550
 551   ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize
 552   # The root cause is that variable driver will use FTW protocol to reclaim variable region.
 553   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
 554   # be reflushed through the manner of fault tolerant write.
 555   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
 556
 557   ## Size of the FTW working block range.
 558   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
 559
 560   ## FFS filename to find the ACPI tables
 561   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
 562
 563   ## FFS filename to find the capsule coalesce image.
 564   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
 565
 566   ## Single root I/O virtualization virtual function memory BAR alignment
 567   #  BITN set indicates 2 of n+12 power
 568   #  BIT0 set indicates 4KB alignment
 569   #  BIT1 set indicates 8KB alignment
 570   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
 571
 572   ## Flag of enabling/disabling the feature of Loading Module at Fixed Address
 573   #  -1: Enable the feature as fixed offset to TOLM
 574   #   0: Disable the feature.
 575   #  Positive Value:  Enable the feature as fixed absolute address, and the value is the top memory address
 576   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
 577
 578   ## Smbios version
 579   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055
 580
 581   ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
 582   #  to handle all link layers. If the value is non zero, the PCD value will be used as block size.
 583   #
 584   gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
 585
 586   ## Progress Code for OS Loader LoadImage start.
 587   #  PROGRESS_CODE_OS_LOADER_LOAD   = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000
 588   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
 589
 590   ## Progress Code for OS Loader StartImage start.
 591   #  PROGRESS_CODE_OS_LOADER_START  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001
 592   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
 593
 594   ## Progress Code for S3 Suspend start.
 595   #  PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000))    = 0x03078000
 596   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
 597
 598   ## Progress Code for S3 Suspend end.
 599   #  PROGRESS_CODE_S3_SUSPEND_END   = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001))    = 0x03078001
 600   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
 601
 602 [PcdsFixedAtBuild,PcdsPatchableInModule]
 603   ## Maximun number of performance log entries during PEI phase.
 604   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
 605
 606   ## RTC Update Timeout Value
 607   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
 608
 609   ## If TRUE, then 16550 serial port registers are in MMIO space.
 610   #  If FALSE, then 16550 serial port registers are in I/O space.  Default value.
 611   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
 612
 613   ## If TRUE, then the 16550 serial port hardware flow control is enabled.
 614   #  If FALSE, then the 16550 serial port hardware flow control is disabled.  Default value.
 615   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
 616
 617   ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).
 618   #  If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.
 619   #  This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.
 620   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
 621
 622   ## Base address of 16550 serial port registers in MMIO or I/O space.  Default is 0x3F8.
 623   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
 624
 625   ## Baud rate for the 16550 serial port.  Default is 115200 baud.
 626   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
 627
 628   ## Line Control Register (LCR) for the 16550 serial port.  This encodes data bits, parity, and stop bits.
 629   #    BIT1..BIT0 - Data bits.  00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits
 630   #    BIT2       - Stop Bits.  0 = 1 stop bit.  1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.
 631   #    BIT5..BIT2 - Parity.  xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity
 632   #    BIT7..BIT6 - Reserved.  Must be 0.
 633   #
 634   # Default is No Parity, 8 Data Bits, 1 Stop Bit.
 635   #
 636   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
 637
 638   ## FIFO Control Register (FCR) for the 16550 serial port.
 639   #    BIT0       - FIFO Enable.  0 = Disable FIFOs.  1 = Enable FIFOs.
 640   #    BIT1       - Clear receive FIFO.  1 = Clear FIFO.
 641   #    BIT2       - Clear transmit FIFO.  1 = Clear FIFO.
 642   #    BIT4..BIT3 - Reserved.  Must be 0.
 643   #    BIT5       - Enable 64-byte FIFO.  0 = Disable 64-byte FIFO.  1 = Enable 64-byte FIFO
 644   #    BIT7..BIT6 - Reserved.  Must be 0.
 645   #
 646   # Default is to enable and clear all FIFOs.
 647   #
 648   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
 649
 650   ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
 651   #  structure.  The default value for this PCD is 0, which means that the DXE Core
 652   #  will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
 653   #  boundary as close to the top of memory as feasible.  If this PCD is set to a
 654   #  value other than 0, then the DXE Core will first attempt to allocate the
 655   #  EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
 656   #  by this PCD, and if that allocation fails, retry the allocation on a 4MB
 657   #  boundary as close to the top of memory as feasible.
 658   #
 659   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
 660
 661 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
 662   ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.
 663   #  This PCD could be set to 0 then console output could be at max column and max row.
 664   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
 665
 666   ## This PCD defines the Console output row and the default value is 80 according to UEFI spec.
 667   #  This PCD could be set to 0 then console output could be at max column and max row.
 668   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
 669
 670   ## This PCD defines the video horizontal resolution.
 671   #  This PCD could be set to 0 then video resolution could be at highest resolution.
 672   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
 673
 674   ## This PCD defines the video vertical resolution.
 675   #  This PCD could be set to 0 then video resolution could be at highest resolution.
 676   gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
 677
 678 [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]
 679   ## Base address of the NV variable range in flash device
 680   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
 681
 682   ## Base address of the FTW spare block range in flash device.
 683   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
 684
 685   ## Base address of the FTW working block range in flash device.
 686   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
 687
 688   ## 64-bit Base address of the NV variable range in flash device
 689   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
 690
 691   ## 64-bit Base address of the FTW spare block range in flash device.
 692   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
 693
 694   ## 64-bit Base address of the FTW working block range in flash device.
 695   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
 696
 697   ## This PCD defines the print string.
 698   #  This PCD is a sample to explain String typed PCD usage.
 699   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
 700
 701   ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store
 702   #  The range is valid if non-zero.  The memory range size must be PcdVariableStoreSize.
 703   gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
 704
 705   ## This PCD specifies whether the Single Root I/O virtualization support.
 706   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
 707
 708   ## This PCD specifies whether the Alternative Routing-ID support.
 709   gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
 710
 711   ## This PCD specifies whether the Multi Root I/O virtualization support.
 712   gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
 713
 714 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
 715   ## This PCD defines the times to print hello world string.
 716   #  This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
 717   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
 718
 719   ## Indicate the max size of the capsule image with reset flag that the platform can support.
 720   #  The default max size is 100MB (0x6400000) for more than one large capsule images.
 721   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
 722
 723   ## Indicate the max size of the capsule image without reset flag that the platform can support.
 724   #  The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
 725   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
 726
 727   ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
 728   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
 729
 730   ## Firmware revision that is default value filled into the EFI System Table
 731   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
 732
 733   ## Null-terminated Unicode string that described the firmware version
 734   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
 735
 736   ## Null-terminated Unicode string that contains the date the formware was released
 737   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
 738
 739   ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true
 740   #  (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.
 741   #  The default value in PeiPhase is 1 KBytes.
 742   #  The default value in DxePhase is 128 KBytes.
 743   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
 744
 745   ## This PCD specifies whether to reset system when memory type information changes.
 746   gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
 747
 748   ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
 749   #  Only following values defined in UEFI specification are valid:
 750   #  0x00 (EFI_BLACK)
 751   #  0x01 (EFI_BLUE)
 752   #  0x02 (EFI_GREEN)
 753   #  0x03 (EFI_CYAN)
 754   #  0x04 (EFI_RED)
 755   #  0x05 (EFI_MAGENTA)
 756   #  0x06 (EFI_BROWN)
 757   #  0x07 (EFI_LIGHTGRAY)
 758   #  0x08 (EFI_DARKGRAY)
 759   #  0x09 (EFI_LIGHTBLUE)
 760   #  0x0A (EFI_LIGHTGREEN)
 761   #  0x0B (EFI_LIGHTCYAN)
 762   #  0x0C (EFI_LIGHTRED)
 763   #  0x0D (EFI_LIGHTMAGENTA)
 764   #  0x0E (EFI_YELLOW)
 765   #  0x0F (EFI_WHITE)
 766   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
 767
 768   ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
 769   #  Only following values defined in UEFI specification are valid:
 770   #  0x00 (EFI_BLACK)
 771   #  0x01 (EFI_BLUE)
 772   #  0x02 (EFI_GREEN)
 773   #  0x03 (EFI_CYAN)
 774   #  0x04 (EFI_RED)
 775   #  0x05 (EFI_MAGENTA)
 776   #  0x06 (EFI_BROWN)
 777   #  0x07 (EFI_LIGHTGRAY)
 778   #  0x08 (EFI_DARKGRAY)
 779   #  0x09 (EFI_LIGHTBLUE)
 780   #  0x0A (EFI_LIGHTGREEN)
 781   #  0x0B (EFI_LIGHTCYAN)
 782   #  0x0C (EFI_LIGHTRED)
 783   #  0x0D (EFI_LIGHTMAGENTA)
 784   #  0x0E (EFI_YELLOW)
 785   #  0x0F (EFI_WHITE)
 786   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
 787
 788   ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
 789   #  The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:
 790   #  0x00 (EFI_BLACK)
 791   #  0x01 (EFI_BLUE)
 792   #  0x02 (EFI_GREEN)
 793   #  0x03 (EFI_CYAN)
 794   #  0x04 (EFI_RED)
 795   #  0x05 (EFI_MAGENTA)
 796   #  0x06 (EFI_BROWN)
 797   #  0x07 (EFI_LIGHTGRAY)
 798   #  0x08 (EFI_DARKGRAY)
 799   #  0x09 (EFI_LIGHTBLUE)
 800   #  0x0A (EFI_LIGHTGREEN)
 801   #  0x0B (EFI_LIGHTCYAN)
 802   #  0x0C (EFI_LIGHTRED)
 803   #  0x0D (EFI_LIGHTMAGENTA)
 804   #  0x0E (EFI_YELLOW)
 805   #  0x0F (EFI_WHITE)
 806   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
 807
 808   ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
 809   #  The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:
 810   #  0x00 (EFI_BACKGROUND_BLACK)
 811   #  0x10 (EFI_BACKGROUND_BLUE)
 812   #  0x20 (EFI_BACKGROUND_GREEN)
 813   #  0x30 (EFI_BACKGROUND_CYAN)
 814   #  0x40 (EFI_BACKGROUND_RED)
 815   #  0x50 (EFI_BACKGROUND_MAGENTA)
 816   #  0x60 (EFI_BACKGROUND_BROWN)
 817   #  0x70 (EFI_BACKGROUND_LIGHTGRAY)
 818   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
 819
 820   ## Time in second to delay for SATA devices to spin-up for recovery.
 821   gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
 822
 823   ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold
 824   #  runtime created S3 boot script entries. The default page number is 2. When changing the value of this
 825   #  PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot
 826   #  script node created in runtime phase.
 827   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
 828
 829   ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
 830   #  The default size 32K. When changing the value of this PCD, the platform developer should
 831   #  make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.
 832   gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
 833
 834   ## This PCD specifies whether 1G page table is enabled.
 835   gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
 836
 837   ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
 838   #  the extension FPDT boot records got after ReadyToBoot and before ExitBootService.
 839   gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
 840
 841   ## This PCD specifies whether ConIn device are connected on demand. If TRUE, ConIn
 842   #  device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
 843   #  by Consplitter should be called before any real key read operation.
 844   gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
 845
 846   ## This PCD specified whether the S.M.A.R.T feature of attached ATA hard disks are enabled.
 847   gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
 848
 849 [PcdsPatchableInModule]
 850   ## Specify  memory size with page number for PEI code when
 851   #  the feature of Loading Module at Fixed Address is enabled
 852   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
 853
 854   ## Specify  memory size with page number for DXE boot time code when
 855   #  the feature of Loading Module at Fixed Address is enabled
 856   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
 857
 858   ## Specify  memory size with page number for DXE runtime code when
 859   #  the feature of Loading Module at Fixed Address is enabled
 860   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
 861
 862   ## Specify  memory size with page number for SMM code when
 863   #  the feature of Loading Module at Fixed Address is enabled
 864   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
 865
 866 [PcdsDynamic, PcdsDynamicEx]
 867   ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
 868   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
 869   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
 870   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
 871   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
 872
 873   ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
 874   #  instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
 875   #  only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
 876   #  default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
 877   gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
 878