]> git.proxmox.com Git - mirror_edk2.git/blob - MdeModulePkg/MdeModulePkg.dec
Added SMBIOS 2.8.0 updates.
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
1 ## @file MdeModulePkg.dec
2 #
3 # This package provides the modules that conform to UEFI/PI Industry standards.
4 # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
5 # and libraries instances, which are used for those modules.
6 #
7 # Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
8 # This program and the accompanying materials are licensed and made available under
9 # the terms and conditions of the BSD License that accompanies this distribution.
10 # The full text of the license may be found at
11 # http://opensource.org/licenses/bsd-license.php.
12 #
13 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
14 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
15 #
16 ##
17
18
19 [Defines]
20 DEC_SPECIFICATION = 0x00010005
21 PACKAGE_NAME = MdeModulePkg
22 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
23 PACKAGE_VERSION = 0.93
24
25 [Includes]
26 Include
27
28
29 [LibraryClasses]
30 ## @libraryclass IpIo layer upon EFI IP4 Protocol.
31 # This library is only intended to be used by UEFI network stack modules.
32 IpIoLib|Include/Library/IpIoLib.h
33
34 ## @libraryclass Basic function for UEFI network stack.
35 # This library is only intended to be used by UEFI network stack modules.
36 NetLib|Include/Library/NetLib.h
37
38 ## @libraryclass The helper routines to access UDP service.
39 # This library is only intended to be used by UEFI network stack modules.
40 UdpIoLib|Include/Library/UdpIoLib.h
41
42 ## @libraryclass The helper routines to access TCP service.
43 # This library is only intended to be used by UEFI network stack modules.
44 TcpIoLib|Include/Library/TcpIoLib.h
45
46 ## @libraryclass Defines a set of methods to reset whole system.
47 ResetSystemLib|Include/Library/ResetSystemLib.h
48
49 ## @libraryclass Defines a set of methods related do S3 mode.
50 # This library class is no longer used and modules using this library should
51 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
52 S3Lib|Include/Library/S3Lib.h
53
54 ## @libraryclass Defines a set of methods related recovery mode.
55 # This library class is no longer used and modules using this library should
56 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
57 RecoveryLib|Include/Library/RecoveryLib.h
58
59 ## @libraryclass Provides HII related functions.
60 HiiLib|Include/Library/HiiLib.h
61
62 ## @libraryclass Defines a set of interfaces on how to process capusle image update.
63 CapsuleLib|Include/Library/CapsuleLib.h
64
65 ## @libraryclass Library for Deferred Procedure Calls.
66 DpcLib|Include/Library/DpcLib.h
67
68 ## @libraryclass Provides global variables that are pointers
69 # to the UEFI HII related protocols.
70 #
71 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
72
73 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
74 #
75 SecurityManagementLib|Include/Library/SecurityManagementLib.h
76
77 ## @libraryclass OEM status code libary is used to report status code to OEM device.
78 #
79 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
80
81 ## @libraryclass Debug Agent is used to provide soft debug capability.
82 #
83 DebugAgentLib|Include/Library/DebugAgentLib.h
84
85 ## @libraryclass Provide platform specific hooks.
86 #
87 PlatformHookLib|Include/Library/PlatformHookLib.h
88
89 ## @libraryclass Provide platform specific hooks for SMM core.
90 #
91 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
92
93 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
94 #
95 LockBoxLib|Include/Library/LockBoxLib.h
96
97 ## @libraryclass Provide the CPU exception handler.
98 #
99 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
100
101 ## @libraryclass Provides platform specific display interface.
102 #
103 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
104
105 [Guids]
106 ## MdeModule package token space guid
107 # Include/Guid/MdeModulePkgTokenSpace.h
108 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
109
110 ## Hob guid for Pcd DataBase
111 # Include/Guid/PcdDataBaseHobGuid.h
112 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
113
114 ## Guid for PCD DataBase signature.
115 # Include/Guid/PcdDataBaseSignatureGuid.h
116 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
117
118 ## Guid for EDKII implementation GUIDed opcodes
119 # Include/Guid/MdeModuleHii.h
120 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
121
122 ## Guid for Framework vfr GUIDed opcodes.
123 # Include/Guid/MdeModuleHii.h
124 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
125
126 ## Guid to specify the System Non Volatile FV
127 # Include/Guid/SystemNvDataGuid.h
128 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
129
130 ## GUID used as the signature of FTW working block header.
131 # Include/Guid/SystemNvDataGuid.h
132 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
133
134 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
135 # Include/Guid/FaultTolerantWrite.h
136 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
137
138 ## Guid specify the device is the console out device.
139 # Include/Guid/ConsoleOutDevice.h
140 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
141
142 ## Guid specify the device is the console in device.
143 # Include/Guid/ConsoleInDevice.h
144 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
145
146 ## Hob and Variable guid specify the platform memory type information.
147 # Include/Guid/MemoryTypeInformation.h
148 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
149
150 ## Capsule update hob and variable guid
151 # Include/Guid/CapsuleVendor.h
152 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
153
154 ## Guid specifiy the device is the StdErr device.
155 # Include/Guid/StandardErrorDevice.h
156 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
157
158 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
159 # Include/Guid/VariableFormat.h
160 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
161
162 # Include/Guid/VariableIndexTable.h
163 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
164
165 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
166 # Include/Guid/SmmVariableCommon.h
167 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
168
169 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
170 # Include/Guid/Performance.h
171 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
172 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
173 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
174 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
175
176 ## Guid is defined for CRC32 encapsulation scheme.
177 # Include/Guid/Crc32GuidedSectionExtraction.h
178 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
179
180 ## Include/Guid/NicIp4ConfigNvData.h
181 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
182
183 ## Include/Guid/StatusCodeCallbackGuid.h
184 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
185
186 ## GUID identifies status code records HOB that originate from the PEI status code
187 # Include/Guid/MemoryStatusCodeRecord.h
188 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
189
190 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
191 # Include/Guid/StatusCodeDataTypeDebug.h
192 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
193
194 ## A configuration Table Guid for Load module at fixed address
195 # Include/Guid/LoadModuleAtFixedAddress.h
196 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
197
198 ## GUID used to store the global debug mask value into an EFI Variable
199 # Include/Guid/DebugMask.h
200 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
201
202 ## Event for the DXE Core to signal idle events
203 # Include/Guid/EventIdle.h
204 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
205
206 ## Include/Guid/RecoveryDevice.h
207 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
208
209 ## Include/Guid/RecoveryDevice.h
210 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
211
212 ## Include/Guid/RecoveryDevice.h
213 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
214
215 ## Include/Guid/RecoveryDevice.h
216 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
217
218 ## Include/Guid/SmmLockBox.h
219 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
220
221 ## Include/Guid/AcpiS3Context.h
222 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
223
224 ## Include/Guid/AcpiS3Context.h
225 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
226
227 ## Include/Guid/BootScriptExecutorVariable.h
228 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
229 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
230
231 ## Include/Guid/UsbKeyBoardLayout.h
232 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
233 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
234
235 ## Include/Guid/HiiResourceSampleHii.h
236 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
237
238 ## Include/Guid/DriverSampleHii.h
239 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
240 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
241 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
242
243 ## Include/Guid/PlatDriOverrideHii.h
244 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
245
246 ## Include/Guid/Ip4ConfigHii.h
247 gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}
248
249 ## Include/Guid/VlanConfigHii.h
250 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
251
252 ## Include/Guid/Ip4IScsiConfigHii.h
253 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
254 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
255
256 ## Include/Guid/ZeroGuid.h
257 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
258
259 ## Include/Guid/MtcVendor.h
260 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
261
262 ## Guid for Firmware Performance Data Table (FPDT) implementation.
263 # Include/Guid/FirmwarePerformance.h
264 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
265 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
266
267 ## Include/Guid/ExitBootServiceFailed.h
268 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
269
270 ## Include/Guid/ConnectConInEvent.h
271 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
272
273 ## Include/Guid/StatusCodeDataTypeVariable.h
274 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
275
276 [Ppis]
277 ## Include/Ppi/AtaController.h
278 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
279
280 ## Include/Ppi/UsbHostController.h
281 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
282
283 ## Include/Ppi/Usb2HostController.h
284 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
285
286 ## Include/Ppi/UsbController.h
287 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
288
289 ## Include/Ppi/UsbIo.h
290 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
291
292 ## Include/Ppi/Capsule.h
293 gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
294
295 ## Include/Ppi/SecPerformance.h
296 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
297
298 ## Include/Ppi/SmmCommunication.h
299 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
300
301 ## Include/Ppi/SmmAccess.h
302 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
303
304 ## Include/Ppi/SmmControl.h
305 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
306
307 ## Include/Ppi/PostBootScriptTable.h
308 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
309
310 [Protocols]
311 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
312 # Include/Protocol/LoadPe32Image.h
313 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
314 # If developer need implement such functionality, they should use BasePeCoffLib.
315 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
316
317 ## Print protocol defines basic print functions to print the format unicode and ascii string.
318 # Include/Protocol/Print2.h
319 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
320
321 ## This protocol defines the generic memory test interfaces in Dxe phase.
322 # Include/Protocol/GenericMemoryTest.h
323 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
324
325 ## Include/Protocol/Dpc.h
326 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
327
328 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
329 # Include/Protocol/FaultTolerantWrite.h
330 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
331
332 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
333 # Include/Protocol/SmmFaultTolerantWrite.h
334 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
335
336 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
337 # Include/Protocol/SwapAddressRange.h
338 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
339
340 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
341 # Include/Protocol/SmmSwapAddressRange.h
342 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
343
344 ## This protocol is intended for use as a means to store data in the EFI SMM environment.
345 # Include/Protocol/SmmVariableProtocol.h
346 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
347
348 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
349 # Include/Protocol/VariableLock.h
350 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
351
352 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
353 # Include/Protocol/SmmFirmwareVolumeBlock.h
354 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
355
356 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
357 # Include/Guid/DebugMask.h
358 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
359
360 ## Include/Protocol/LockBox.h
361 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
362
363 ## Include/Protocol/FormBrowserEx.h
364 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
365
366 ## Include/Protocol/EbcVmTest.h
367 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
368
369 ## Include/Protocol/EbcSimpleDebugger.h
370 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
371
372 ## Include/Protocol/BootLogo.h
373 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
374
375 ## Include/Protocol/DisplayProtocol.h
376 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
377
378 ## Include/Protocol/FormBrowserEx2.h
379 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
380
381 [PcdsFeatureFlag]
382 ## Indicate whether platform can support update capsule across a system reset
383 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
384
385 ## This feature flag can be used to enable or disable all PCD PEIM services.
386 # If TRUE, all PCD PPI services will be produced.
387 # If FALSE, the minimal PCD PEIM services (only GetService) will be produced.
388 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
389
390 ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
391 # It can be disabled to save size.
392 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
393
394 ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
395 # It can be disabled to save size.
396 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
397
398 ## If TRUE, enable the statistic functionality about variable usage. Such information is
399 # stored as a vendor configuration table into the EFI system table.
400 # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get
401 # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can
402 # not output useful info.
403 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
404
405 ## If TRUE, Unicode Collation Protocol will be installed.
406 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
407
408 ## If TRUE, Unicode Collation 2 Protocol will be installed.
409 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
410
411 ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
412 # It could be set FALSE to save size.
413 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
414
415 ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
416 # It could be set FALSE to save size.
417 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
418
419 ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.
420 # If TE section is not found, then PeiCore will search PE section.
421 # If FALSE, PeiCore will first search PE section from PEIM to load the image.
422 # This PCD is used to tune Pei phase performance to reduce the search image time.
423 # It can be set according to the generated image section type.
424 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
425
426 ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI
427 # interrupt to access usb device in the case of absence of usb stack.
428 # DUET platform requires the token to be TRUE.
429 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
430
431 ## If TRUE, HiiImageProtocol will be installed.
432 # FALSE is for size reduction.
433 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
434
435 ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
436 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved
437 # from HII database.
438 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
439
440 ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
441 # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
442 # This is used to provide backward compatibility support to Framework HII and Framework FvHob.
443 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
444
445 ## If TRUE, HelloWorld Application will print the verbose information.
446 # This PCD is a sample to explain FeatureFlag PCD usage.
447 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
448
449 ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.
450 # If FASLE, only FTW Write service is available.
451 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
452
453 ## If TRUE, DXE IPL must support the UEFI decompression algorithm.
454 # If FALSE, DXE IPL will not support UEFI decompression to save space.
455 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
456
457 ## This PCD specifies whether PciBus supports the hot plug device.
458 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
459
460 ## This PCD specifies whether the PCI bus driver probes non-standard,
461 # such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
462 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
463 ## This PCD specifies whether StatusCode is reported via Serial port.
464 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
465
466 ## This PCD specifies whether StatusCode is stored in memory.
467 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
468 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
469
470 ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.
471 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
472
473 ## This PCD specified whether ACPI SDT protocol is installed.
474 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
475
476 ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
477 # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.
478 # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.
479 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
480
481 ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.
482 # If TRUE, TEXT statement will always be set to GrayOut.
483 # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
484 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
485
486 ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser.
487 # If TRUE, the unselectable menu will be set to GrayOut.
488 # If FALSE, the menu will be show as normal menu entry even if it is not selectable.
489 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
490
491 ## If TRUE, recovery from IDE disk will be supported.
492 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
493
494 ## If TRUE, recovery from FAT floppy disk will be supported.
495 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
496
497 ## If TRUE, recovery from data CD will be supported.
498 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
499
500 ## If TRUE, recovery from FAT USB disk will be supported.
501 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
502
503 ## If TRUE, S3 performance data will be supported in ACPI FPDT table.
504 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
505
506 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
507 ##
508 # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
509 # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;
510 # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
511 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
512 # is built in firmware.
513 #
514 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
515
516 ##
517 # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only
518 # makes sense in the case where the DxeIpl and the DxeCore are both X64.
519 #
520 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
521
522 [PcdsFixedAtBuild]
523 ## Dynamic type PCD can be registered callback function for Pcd setting action.
524 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
525 # for a dynamic PCD used in PEI phase.
526 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
527
528 ## Maximum number of FV is supported by PeiCore's dispatching.
529 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
530
531 ## Maximum File count in every FV is supported by PeiCore's dispatching.
532 # PeiCore supported File type includes PEIM, Combined PEIM and FV.
533 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
534
535 ## Maximum stack size for PeiCore.
536 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
537
538 ## Maximum PPI count is supported by PeiCore's PPI database.
539 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
540
541 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize
542 # The root cause is that variable driver will use FTW protocol to reclaim variable region.
543 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
544 # be reflushed through the manner of fault tolerant write.
545 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
546
547 ## The maximum size of single common variable, that is non-HwErr type varible.
548 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
549
550 ## The maximum size of single hardware error record variable.
551 # In IA32/X64 platforms, this value should be larger than 1KB.
552 # In IA64 platforms, this value should be larger than 128KB.
553 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
554
555 ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize
556 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
557 # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.
558 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
559 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
560
561 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.
562 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
563
564 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
565 # The root cause is that variable driver will use FTW protocol to reclaim variable region.
566 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
567 # be reflushed through the manner of fault tolerant write.
568 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
569
570 ## Size of the FTW working block range.
571 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
572
573 ## FFS filename to find the ACPI tables
574 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
575
576 ## FFS filename to find the capsule coalesce image.
577 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
578
579 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address
580 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM
581 # 0: Disable the feature
582 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address
583 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
584
585 ## Smbios version
586 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0208|UINT16|0x00010055
587
588 ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
589 # to handle all link layers. If the value is non zero, the PCD value will be used as block size.
590 #
591 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
592
593 ## Progress Code for OS Loader LoadImage start.
594 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000
595 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
596
597 ## Progress Code for OS Loader StartImage start.
598 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001
599 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
600
601 ## Progress Code for S3 Suspend start.
602 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000
603 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
604
605 ## Progress Code for S3 Suspend end.
606 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001
607 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
608
609 ## Error Code for SetVariable failure.
610 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002
611 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
612
613 [PcdsFixedAtBuild,PcdsPatchableInModule]
614 ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
615 # to store PCD value.
616 #
617 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
618
619 ## Maximun number of performance log entries during PEI phase.
620 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
621
622 ## RTC Update Timeout Value
623 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
624
625 ## If TRUE, then 16550 serial port registers are in MMIO space.
626 # If FALSE, then 16550 serial port registers are in I/O space. Default value.
627 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
628
629 ## If TRUE, then the 16550 serial port hardware flow control is enabled.
630 # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.
631 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
632
633 ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).
634 # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.
635 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.
636 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
637
638 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
639 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
640
641 ## Baud rate for the 16550 serial port. Default is 115200 baud.
642 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
643
644 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.
645 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits
646 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.
647 # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity
648 # BIT7..BIT6 - Reserved. Must be 0.
649 #
650 # Default is No Parity, 8 Data Bits, 1 Stop Bit.
651 #
652 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
653
654 ## FIFO Control Register (FCR) for the 16550 serial port.
655 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.
656 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.
657 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.
658 # BIT4..BIT3 - Reserved. Must be 0.
659 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO
660 # BIT7..BIT6 - Reserved. Must be 0.
661 #
662 # Default is to enable and clear all FIFOs.
663 #
664 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
665
666 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
667 # structure. The default value for this PCD is 0, which means that the DXE Core
668 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
669 # boundary as close to the top of memory as feasible. If this PCD is set to a
670 # value other than 0, then the DXE Core will first attempt to allocate the
671 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
672 # by this PCD, and if that allocation fails, retry the allocation on a 4MB
673 # boundary as close to the top of memory as feasible.
674 #
675 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
676
677 ## This PCD specifies whether to shadow PEIM on S3 boot path after memory is ready.
678 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
679
680 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
681 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
682
683 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
684 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
685
686 ## Default OEM Revision for ACPI table creation.
687 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
688
689 ## Default Creator ID for ACPI table creation.
690 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
691
692 ## Default Creator Revision for ACPI table creation.
693 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
694
695 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
696 ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.
697 # This PCD could be set to 0 then console output could be at max column and max row.
698 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
699
700 ## This PCD defines the Console output row and the default value is 80 according to UEFI spec.
701 # This PCD could be set to 0 then console output could be at max column and max row.
702 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
703
704 ## This PCD defines the video horizontal resolution.
705 # This PCD could be set to 0 then video resolution could be at highest resolution.
706 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
707
708 ## This PCD defines the video vertical resolution.
709 # This PCD could be set to 0 then video resolution could be at highest resolution.
710 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
711
712 [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]
713 ## Base address of the NV variable range in flash device
714 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
715
716 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
717 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
718
719 ## Base address of the FTW working block range in flash device.
720 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
721
722 ## 64-bit Base address of the NV variable range in flash device
723 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
724
725 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
726 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
727
728 ## 64-bit Base address of the FTW working block range in flash device.
729 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
730
731 ## This PCD defines the print string.
732 # This PCD is a sample to explain String typed PCD usage.
733 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
734
735 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store
736 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
737 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
738
739 ## This PCD specifies whether the Single Root I/O virtualization support.
740 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
741
742 ## This PCD specifies whether the Alternative Routing-ID support.
743 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
744
745 ## This PCD specifies whether the Multi Root I/O virtualization support.
746 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
747
748 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
749 ## Single root I/O virtualization virtual function memory BAR alignment
750 # BITN set indicates 2 of n+12 power
751 # BIT0 set indicates 4KB alignment
752 # BIT1 set indicates 8KB alignment
753 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
754
755 ## This PCD defines the times to print hello world string.
756 # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
757 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
758
759 ## Indicate the max size of the capsule image with reset flag that the platform can support.
760 # The default max size is 100MB (0x6400000) for more than one large capsule images.
761 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
762
763 ## Indicate the max size of the capsule image without reset flag that the platform can support.
764 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
765 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
766
767 ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
768 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
769
770 ## Firmware revision that is default value filled into the EFI System Table
771 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
772
773 ## Null-terminated Unicode string that described the firmware version
774 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
775
776 ## Null-terminated Unicode string that contains the date the formware was released
777 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
778
779 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true
780 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.
781 # The default value in PeiPhase is 1 KBytes.
782 # The default value in DxePhase is 128 KBytes.
783 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
784
785 ## This PCD specifies whether to reset system when memory type information changes.
786 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
787
788 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
789 # Only following values defined in UEFI specification are valid:
790 # 0x00 (EFI_BLACK)
791 # 0x01 (EFI_BLUE)
792 # 0x02 (EFI_GREEN)
793 # 0x03 (EFI_CYAN)
794 # 0x04 (EFI_RED)
795 # 0x05 (EFI_MAGENTA)
796 # 0x06 (EFI_BROWN)
797 # 0x07 (EFI_LIGHTGRAY)
798 # 0x08 (EFI_DARKGRAY)
799 # 0x09 (EFI_LIGHTBLUE)
800 # 0x0A (EFI_LIGHTGREEN)
801 # 0x0B (EFI_LIGHTCYAN)
802 # 0x0C (EFI_LIGHTRED)
803 # 0x0D (EFI_LIGHTMAGENTA)
804 # 0x0E (EFI_YELLOW)
805 # 0x0F (EFI_WHITE)
806 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
807
808 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
809 # Only following values defined in UEFI specification are valid:
810 # 0x00 (EFI_BLACK)
811 # 0x01 (EFI_BLUE)
812 # 0x02 (EFI_GREEN)
813 # 0x03 (EFI_CYAN)
814 # 0x04 (EFI_RED)
815 # 0x05 (EFI_MAGENTA)
816 # 0x06 (EFI_BROWN)
817 # 0x07 (EFI_LIGHTGRAY)
818 # 0x08 (EFI_DARKGRAY)
819 # 0x09 (EFI_LIGHTBLUE)
820 # 0x0A (EFI_LIGHTGREEN)
821 # 0x0B (EFI_LIGHTCYAN)
822 # 0x0C (EFI_LIGHTRED)
823 # 0x0D (EFI_LIGHTMAGENTA)
824 # 0x0E (EFI_YELLOW)
825 # 0x0F (EFI_WHITE)
826 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
827
828 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
829 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:
830 # 0x00 (EFI_BLACK)
831 # 0x01 (EFI_BLUE)
832 # 0x02 (EFI_GREEN)
833 # 0x03 (EFI_CYAN)
834 # 0x04 (EFI_RED)
835 # 0x05 (EFI_MAGENTA)
836 # 0x06 (EFI_BROWN)
837 # 0x07 (EFI_LIGHTGRAY)
838 # 0x08 (EFI_DARKGRAY)
839 # 0x09 (EFI_LIGHTBLUE)
840 # 0x0A (EFI_LIGHTGREEN)
841 # 0x0B (EFI_LIGHTCYAN)
842 # 0x0C (EFI_LIGHTRED)
843 # 0x0D (EFI_LIGHTMAGENTA)
844 # 0x0E (EFI_YELLOW)
845 # 0x0F (EFI_WHITE)
846 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
847
848 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
849 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:
850 # 0x00 (EFI_BACKGROUND_BLACK)
851 # 0x10 (EFI_BACKGROUND_BLUE)
852 # 0x20 (EFI_BACKGROUND_GREEN)
853 # 0x30 (EFI_BACKGROUND_CYAN)
854 # 0x40 (EFI_BACKGROUND_RED)
855 # 0x50 (EFI_BACKGROUND_MAGENTA)
856 # 0x60 (EFI_BACKGROUND_BROWN)
857 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)
858 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
859
860 ## Time in second to delay for SATA devices to spin-up for recovery.
861 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
862
863 ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold
864 # runtime created S3 boot script entries. The default page number is 2. When changing the value of this
865 # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot
866 # script node created in runtime phase.
867 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
868
869 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
870 # The default size 32K. When changing the value of this PCD, the platform developer should
871 # make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.
872 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
873
874 ## This PCD specifies whether 1G page table is enabled.
875 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
876
877 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
878 # the extension FPDT boot records got after ReadyToBoot and before ExitBootService.
879 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
880
881 ## This PCD specifies whether ConIn device are connected on demand. If TRUE, ConIn
882 # device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
883 # by Consplitter should be called before any real key read operation.
884 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
885
886 ## This PCD specified whether the S.M.A.R.T feature of attached ATA hard disks are enabled.
887 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
888
889 ## This PCD specifies whether full PCI enumeration is disabled.
890 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
891
892 ## Disk I/O - Number of Data Buffer block
893 # Define the size in block of the pre-allocated buffer. It provide better
894 # performance for large Disk I/O requests
895 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
896
897 [PcdsPatchableInModule]
898 ## Specify memory size with page number for PEI code when
899 # the feature of Loading Module at Fixed Address is enabled
900 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
901
902 ## Specify memory size with page number for DXE boot time code when
903 # the feature of Loading Module at Fixed Address is enabled
904 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
905
906 ## Specify memory size with page number for DXE runtime code when
907 # the feature of Loading Module at Fixed Address is enabled
908 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
909
910 ## Specify memory size with page number for SMM code when
911 # the feature of Loading Module at Fixed Address is enabled
912 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
913
914 [PcdsDynamic, PcdsDynamicEx]
915 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
916 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
917 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
918 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
919 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
920
921 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
922 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
923 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
924 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
925 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
926