MdeModulePkg/MdeModulePkg.dec

   1 ##  @file  MdeModulePkg.dec
   2 #
   3 # This package provides the modules that conform to EFI/PI Industry standards.
   4 # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
   5 # and libraries instances, which are used for those modules.
   6 #
   7 # Copyright (c) 2007 - 2009, Intel Corporation.
   8 #
   9 # All rights reserved.
  10 # This program and the accompanying materials are licensed and made available under
  11 # the terms and conditions of the BSD License which accompanies this distribution.
  12 # The full text of the license may be found at
  13 # http://opensource.org/licenses/bsd-license.php
  14 #
  15 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  16 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  17 #
  18 ##
  19
  20
  21 [Defines]
  22   DEC_SPECIFICATION              = 0x00010005
  23   PACKAGE_NAME                   = MdeModulePkg
  24   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  25   PACKAGE_VERSION                = 0.1
  26
  27 [Includes.common]
  28   Include
  29
  30
  31 [LibraryClasses.common]
  32   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  33   #   This library is only intended to be used by UEFI network stack modules.
  34   IpIoLib|Include/Library/IpIoLib.h
  35
  36   ##  @libraryclass  Basic function for UEFI network stack.
  37   #   This library is only intended to be used by UEFI network stack modules.
  38   NetLib|Include/Library/NetLib.h
  39
  40   ##  @libraryclass  The helper routines to access UDP service.
  41   #   This library is only intended to be used by UEFI network stack modules.
  42   UdpIoLib|Include/Library/UdpIoLib.h
  43
  44   ##  @libraryclass  Defines a set of methods to reset whole system.
  45   ResetSystemLib|Include/Library/ResetSystemLib.h
  46
  47   ##  @libraryclass  Defines a set of methods related do S3 mode.
  48   S3Lib|Include/Library/S3Lib.h
  49
  50   ##  @libraryclass  Defines a set of methods related recovery mode.
  51   RecoveryLib|Include/Library/RecoveryLib.h
  52
  53   ##  @libraryclass  Basic platform driver override functions.
  54   #   This library is only intended to be used by Platform Driver Override Dxe Driver and Application.
  55   PlatformDriverOverrideLib|Include/Library/PlatformDriverOverrideLib.h
  56
  57   ##  @libraryclass  Provides HII related functions.
  58   HiiLib|Include/Library/HiiLib.h
  59
  60   ##  @libraryclass  Provides a set of interfaces to do IFR opcode creation and interact with a UEFI Form Browser.
  61   IfrSupportLib|Include/Library/IfrSupportLib.h
  62
  63   ##  @libraryclass  Includes two extended HII functions to create and destory Hii Package
  64   #                  by create the virtual Driver Handle.
  65   ##
  66   ExtendedHiiLib|Include/Library/ExtendedHiiLib.h
  67
  68   ##  @libraryclass  Defines APIs that is related to IFR operations but specific to EDK II
  69   #                  implementation.
  70   ##
  71   ExtendedIfrSupportLib|Include/Library/ExtendedIfrSupportLib.h
  72
  73   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  74   CapsuleLib|Include/Library/CapsuleLib.h
  75
  76   ##  @libraryclass  Library for Deferred Procedure Calls.
  77   DpcLib|Include/Library/DpcLib.h
  78
  79   ##  @libraryclass  Provides APIs for system memory test.
  80   ##
  81   BaseMemoryTestLib|Include/Library/BaseMemoryTestLib.h
  82
  83 [Guids.common]
  84   ## MdeModule package token space guid
  85   ## Include/Guid/MdeModulePkgTokenSpace.h
  86   gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
  87
  88   ## Hob guid for Pcd DataBase
  89   ## Include/Guid/PcdDataBaseHobGuid.h
  90   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
  91
  92   ## Guid for EDKII implementation GUIDed opcodes
  93   #  Include/Guid/MdeModuleHii.h
  94   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
  95
  96   ## Guid for Framework vfr GUIDed opcodes.
  97   #  Include/Guid/MdeModuleHii.h
  98   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
  99
 100   ## Guid to specify the System Non Volatile FV
 101   ## Include/Guid/SystemNvDataGuid.h
 102   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
 103
 104   ## Guid specify the device is the console out device.
 105   ## Include/Guid/ConsoleOutDevice.h
 106   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 107
 108   ## Guid specify the device is the console in device.
 109   ## Include/Guid/ConsoleInDevice.h
 110   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 111
 112   ## Hob and Variable guid specify the platform memory type information.
 113   ## Include/Guid/MemoryTypeInformation.h
 114   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
 115
 116   ## Capsule update hob and variable guid
 117   ## Include/Guid/CapsuleVendor.h
 118   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
 119
 120   ## Guid specifiy the device is the StdErr device.
 121   ## Include/Guid/StandardErrorDevice.h
 122   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 123
 124   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
 125   ## Include/Guid/VariableFormat.h
 126   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
 127
 128   ## Platform Override Variable guid
 129   ## Include/Guid/OverrideVariable.h
 130   gEfiOverrideVariableGuid       = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }}
 131
 132   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
 133   ## Include/Guid/Performance.h
 134   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}
 135
 136   ## Guid is defined for CRC32 encapsulation scheme.
 137   ## Include/Guid/Crc32GuidedSectionExtraction.h
 138   gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
 139
 140 [Protocols.common]
 141   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
 142   ## Include/Protocol/LoadPe32Image.h
 143   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
 144
 145   ## Print protocol defines six basic print functions to print the format unicode and ascii string.
 146   ## Include/Protocol/Print2.h
 147   gEfiPrint2ProtocolGuid          = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}
 148
 149   ## This protocol defines the generic memory test interfaces in Dxe phase.
 150   ## Include/Protocol/GenericMemoryTest.h
 151   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
 152
 153   ## This protocol provides the interfaces to Get/Set the current video mode for GOP/UGA screen
 154   ## Include/Protocol/ConsoleControl.h
 155   gEfiConsoleControlProtocolGuid = { 0xF42F7782, 0x012E, 0x4C12, { 0x99, 0x56, 0x49, 0xF9, 0x43, 0x04, 0xF7, 0x21 }}
 156
 157   ## Include/Protocol/NicIp4Config.h
 158   gEfiNicIp4ConfigProtocolGuid   = {0xdca3d4d, 0x12da, 0x4728,  { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 }}
 159
 160   ## Include/Protocol/NicIp4Config.h
 161   gEfiNicIp4ConfigVariableGuid   = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
 162
 163   ## Include/Protocol/Tcp.h
 164   gEfiTcpProtocolGuid            = {0x02b3d5f2, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d }}
 165
 166   ## Include/Protocol/PxeDhcp4CallBack.h
 167   gEfiPxeDhcp4CallbackProtocolGuid = {0xc1544c01, 0x92a4, 0x4198, {0x8a, 0x84, 0x77, 0x85, 0x83, 0xc2, 0x36, 0x21 }}
 168
 169   ## Include/Protocol/PxeDhcp4.h
 170   gEfiPxeDhcp4ProtocolGuid       = {0x03c4e624, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x29, 0x3f, 0xc1, 0x4d }}
 171
 172   ## Include/Protocol/Dpc.h
 173   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
 174
 175   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
 176   #  Include/Protocol/FaultTolerantWrite.h
 177   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 178
 179   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
 180   #  Include/Protocol/SwapAddressRange.h
 181   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
 182
 183 [PcdsFeatureFlag]
 184   ## Indicate whether platform can support update capsule across a system reset
 185   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
 186
 187   ## This feature flag can be used to enable or disable all PCD PEIM services.
 188   #  If TRUE, all PCD PPI services will be produced.
 189   ## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.
 190   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
 191
 192   ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
 193   #  It can be disabled to save size.
 194   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
 195
 196   ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
 197   #  It can be disabled to save size.
 198   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
 199
 200   ## If TRUE, enable the statistic functionality about variable usage. Such information is
 201   #  stored as a vendor configuration table into the EFI system table.
 202   #  If user wants to get variable usage info, this pcd should be set as TRUE.
 203   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
 204
 205   ## If TRUE, Unicode Collation Protocol will be installed.
 206   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
 207
 208   ## If TRUE, Unicode Collation 2 Protocol will be installed.
 209   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
 210
 211   ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
 212   #  It could be set FALSE to save size.
 213   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
 214
 215   ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
 216   #  It could be set FALSE to save size.
 217   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
 218
 219   ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.
 220   #  If TE section is not found, then PeiCore will search PE section.
 221   #  If FALSE, PeiCore will first search PE section from PEIM to load the image.
 222   #  This PCD is used to tune Pei phase performance to reduce the search image time.
 223   #  It can be set according to the generated image section type.
 224   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
 225
 226   ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI
 227   #  interrupt to access usb device in the case of absence of usb stack.
 228   ##
 229   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
 230
 231   ## If TRUE, HiiImageProtocol will be installed.
 232   #  FALSE is for size reduction.
 233   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
 234
 235   ## If TRUE, these interface in EFI_HII_CONFIG_ROUTING_PROTOCOL will be supported: ExtractConfig, ExportConfig, RouteConfig
 236   # and GetAltCfg will be supported. Otherwise, these interfaces will return EFI_UNSUPPORTED.
 237   # FALSE is for size reduction.
 238   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportFullConfigRoutingProtocol|TRUE|BOOLEAN|0x00010101
 239
 240   ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
 241   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
 242   #  from HII database.
 243   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
 244
 245   ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
 246   #  If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
 247   ## This is used to provide backward compatibility support to Framework HII and Framework FvHob.
 248   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
 249
 250   ##
 251   #  If TRUE, HelloWorld Application will print the verbose information.
 252   #  This PCD is a sample to explain FeatureFlag PCD usage.
 253   ##
 254   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
 255
 256   ##
 257   #  If TRUE, FULL FTW protocol services (total six APIs) will be produced.
 258   #  If FASLE, only FTW Write service is available.
 259   gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200a
 260
 261 [PcdsFeatureFlag.IA32]
 262   ##
 263   # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
 264   # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;
 265   # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
 266   # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
 267   # is built in firmware.
 268   #
 269   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
 270
 271 [PcdsFixedAtBuild]
 272   ## Dynamic type PCD can be registered callback function for Pcd setting action.
 273   #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
 274   #  for a dynamic PCD used in PEI phase.
 275   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
 276
 277   ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
 278   #  to store PCD value.
 279   #
 280   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
 281
 282   ## Maximum number of FV is supported by PeiCore's dispatching.
 283   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
 284
 285   ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
 286   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
 287
 288   ## Maximum stack size for PeiCore.
 289   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
 290
 291   ## Maximum PPI count is supported by PeiCore's PPI database.
 292   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
 293
 294   ## Size of the NV variable range.
 295   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
 296
 297   ## Maximum allowable size of a common type variable, that is, non-hardware error type variable.
 298   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
 299
 300   ## Maximum allowable size of a single hardware error record variable.
 301   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
 302
 303   ## Size of allocated memory for volatile variable store. Variables are stored in such region and
 304   #  total length of all variables should not larger than this value.
 305   ##
 306   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
 307
 308   ## Size of the FTW spare block range.
 309   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
 310
 311   ## Size of the FTW working block range.
 312   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
 313
 314 [PcdsFixedAtBuild,PcdsPatchableInModule]
 315   ## Maximun number of performance log entries during PEI phase.
 316   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
 317
 318   ## RTC Update Timeout Value
 319   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
 320
 321 [PcdsPatchableInModule,PcdsDynamic]
 322   ##
 323   #  This PCD defines the Console output column and the default value is 25 according to UEFI spec
 324   ##
 325   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
 326
 327   ##
 328   #  This PCD defines the Console output row and the default value is 80 according to UEFI spec
 329   ##
 330   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
 331
 332 [PcdsFixedAtBuild,PcdsDynamic]
 333   ## Base address of the NV variable range in flash device
 334   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
 335
 336   ## Base address of the FTW spare block range in flash device.
 337   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
 338
 339   ## Base address of the FTW working block range in flash device.
 340   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
 341
 342   ##
 343   #  This PCD defines the print string.
 344   #  This PCD is a sample to explain String typed PCD usage.
 345   ##
 346   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
 347
 348 [PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]
 349   ##
 350   #  This PCD defines the times to print hello world string.
 351   #  This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
 352   ##
 353   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
 354
 355   ## Indicate the max size of the populated capsule image that the platform can support.
 356   #  The default max size is 100MB (0x6400000) for more than one large capsule images.
 357   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
 358
 359   ## Indicate the max size of the non-populated capsule image that the platform can support.
 360   #  The default max size is 10MB (0xa00000) for the casule image without populated flag setting.
 361   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f