MdeModulePkg/MdeModulePkg.dec

   1 ## @file  MdeModulePkg.dec
   2 #
   3 # This package provides the modules that conform to UEFI/PI Industry standards.
   4 # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
   5 # and libraries instances, which are used for those modules.
   6 #
   7 # Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR>
   8 # This program and the accompanying materials are licensed and made available under
   9 # the terms and conditions of the BSD License that accompanies this distribution.
  10 # The full text of the license may be found at
  11 # http://opensource.org/licenses/bsd-license.php.
  12 #
  13 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  15 #
  16 ##
  17
  18
  19 [Defines]
  20   DEC_SPECIFICATION              = 0x00010005
  21   PACKAGE_NAME                   = MdeModulePkg
  22   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  23   PACKAGE_VERSION                = 0.91
  24
  25 [Includes]
  26   Include
  27
  28
  29 [LibraryClasses]
  30   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  31   #   This library is only intended to be used by UEFI network stack modules.
  32   IpIoLib|Include/Library/IpIoLib.h
  33
  34   ##  @libraryclass  Basic function for UEFI network stack.
  35   #   This library is only intended to be used by UEFI network stack modules.
  36   NetLib|Include/Library/NetLib.h
  37
  38   ##  @libraryclass  The helper routines to access UDP service.
  39   #   This library is only intended to be used by UEFI network stack modules.
  40   UdpIoLib|Include/Library/UdpIoLib.h
  41
  42   ##  @libraryclass  Defines a set of methods to reset whole system.
  43   ResetSystemLib|Include/Library/ResetSystemLib.h
  44
  45   ##  @libraryclass  Defines a set of methods related do S3 mode.
  46   #   This library class is no longer used and modules using this library should
  47   #   directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
  48   S3Lib|Include/Library/S3Lib.h
  49
  50   ##  @libraryclass  Defines a set of methods related recovery mode.
  51   #   This library class is no longer used and modules using this library should
  52   #   directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
  53   RecoveryLib|Include/Library/RecoveryLib.h
  54
  55   ##  @libraryclass  Provides HII related functions.
  56   HiiLib|Include/Library/HiiLib.h
  57
  58   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  59   CapsuleLib|Include/Library/CapsuleLib.h
  60
  61   ##  @libraryclass  Library for Deferred Procedure Calls.
  62   DpcLib|Include/Library/DpcLib.h
  63
  64   ##  @libraryclass    Provides global variables that are pointers
  65   #   to the UEFI HII related protocols.
  66   #
  67   UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
  68
  69   ##  @libraryclass    Provides a set of interfaces to abstract the policy of security measurement.
  70   #
  71   SecurityManagementLib|MdeModulePkg/Include/Library/SecurityManagementLib.h
  72
  73   ##  @libraryclass  OEM status code libary is used to report status code to OEM device.
  74   #
  75   OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
  76
  77   ##  @libraryclass  Debug Agent is used to provide soft debug capability.
  78   #
  79   DebugAgentLib|Include/Library/DebugAgentLib.h
  80 [Guids]
  81   ## MdeModule package token space guid
  82   # Include/Guid/MdeModulePkgTokenSpace.h
  83   gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
  84
  85   ## Hob guid for Pcd DataBase
  86   #  Include/Guid/PcdDataBaseHobGuid.h
  87   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
  88
  89   ## Guid for EDKII implementation GUIDed opcodes
  90   #  Include/Guid/MdeModuleHii.h
  91   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
  92
  93   ## Guid for Framework vfr GUIDed opcodes.
  94   #  Include/Guid/MdeModuleHii.h
  95   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
  96
  97   ## Guid to specify the System Non Volatile FV
  98   #  Include/Guid/SystemNvDataGuid.h
  99   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
 100
 101   ## Guid specify the device is the console out device.
 102   #  Include/Guid/ConsoleOutDevice.h
 103   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 104
 105   ## Guid specify the device is the console in device.
 106   #  Include/Guid/ConsoleInDevice.h
 107   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 108
 109   ## Hob and Variable guid specify the platform memory type information.
 110   #  Include/Guid/MemoryTypeInformation.h
 111   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
 112
 113   ## Capsule update hob and variable guid
 114   #  Include/Guid/CapsuleVendor.h
 115   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
 116
 117   ## Guid specifiy the device is the StdErr device.
 118   #  Include/Guid/StandardErrorDevice.h
 119   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 120
 121   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
 122   #  Include/Guid/VariableFormat.h
 123   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
 124
 125   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
 126   #  Include/Guid/Performance.h
 127   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}
 128
 129   ## Guid is defined for CRC32 encapsulation scheme.
 130   #  Include/Guid/Crc32GuidedSectionExtraction.h
 131   gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
 132
 133   ## Include/Guid/NicIp4ConfigNvData.h
 134   gEfiNicIp4ConfigVariableGuid   = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
 135
 136   ## Include/Guid/StatusCodeCallbackGuid.h
 137   gStatusCodeCallbackGuid   = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
 138
 139   ## GUID identifies status code records HOB that originate from the PEI status code
 140   #  Include/Guid/MemoryStatusCodeRecord.h
 141   gMemoryStatusCodeRecordGuid     = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
 142
 143   ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
 144   #  Include/Guid/StatusCodeDataTypeDebug.h
 145   gEfiStatusCodeDataTypeDebugGuid  = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
 146
 147   ##  A configuration Table Guid for Load module at fixed address
 148   #  Include/Guid/LoadModuleAtFixedAddress.h
 149   gLoadFixedAddressConfigurationTableGuid  = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
 150
 151 [Protocols]
 152   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
 153   #  Include/Protocol/LoadPe32Image.h
 154   #  This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
 155   #  If developer need implement such functionality, they should use BasePeCoffLib.
 156   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
 157
 158   ## Print protocol defines basic print functions to print the format unicode and ascii string.
 159   # Include/Protocol/Print2.h
 160   gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
 161
 162   ## This protocol defines the generic memory test interfaces in Dxe phase.
 163   # Include/Protocol/GenericMemoryTest.h
 164   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
 165
 166   ## Include/Protocol/Dpc.h
 167   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
 168
 169   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
 170   #  Include/Protocol/FaultTolerantWrite.h
 171   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 172
 173   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
 174   #  Include/Protocol/SwapAddressRange.h
 175   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
 176
 177 [PcdsFeatureFlag]
 178   ## Indicate whether platform can support update capsule across a system reset
 179   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
 180
 181   ## This feature flag can be used to enable or disable all PCD PEIM services.
 182   #  If TRUE, all PCD PPI services will be produced.
 183   #  If FALSE, the minimal PCD PEIM services (only GetService) will be produced.
 184   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
 185
 186   ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
 187   #  It can be disabled to save size.
 188   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
 189
 190   ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
 191   #  It can be disabled to save size.
 192   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
 193
 194   ## If TRUE, enable the statistic functionality about variable usage. Such information is
 195   #  stored as a vendor configuration table into the EFI system table.
 196   #  If user wants to use VariableInfo application in MdeModulePkg\Application directory to get
 197   #  variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can
 198   #  not output useful info.
 199   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
 200
 201   ## If TRUE, Unicode Collation Protocol will be installed.
 202   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
 203
 204   ## If TRUE, Unicode Collation 2 Protocol will be installed.
 205   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
 206
 207   ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
 208   #  It could be set FALSE to save size.
 209   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
 210
 211   ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
 212   #  It could be set FALSE to save size.
 213   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
 214
 215   ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.
 216   #  If TE section is not found, then PeiCore will search PE section.
 217   #  If FALSE, PeiCore will first search PE section from PEIM to load the image.
 218   #  This PCD is used to tune Pei phase performance to reduce the search image time.
 219   #  It can be set according to the generated image section type.
 220   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
 221
 222   ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI
 223   #  interrupt to access usb device in the case of absence of usb stack.
 224   #  DUET platform requires the token to be TRUE.
 225   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
 226
 227   ## If TRUE, HiiImageProtocol will be installed.
 228   #  FALSE is for size reduction.
 229   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
 230
 231   ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
 232   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
 233   #  from HII database.
 234   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
 235
 236   ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
 237   #  If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
 238   #  This is used to provide backward compatibility support to Framework HII and Framework FvHob.
 239   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
 240
 241   ## If TRUE, HelloWorld Application will print the verbose information.
 242   #  This PCD is a sample to explain FeatureFlag PCD usage.
 243   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
 244
 245   ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.
 246   #  If FASLE, only FTW Write service is available.
 247   gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
 248
 249   ## If TRUE, DXE IPL must support the UEFI decompression algorithm.
 250   #  If FALSE, DXE IPL will not support UEFI decompression to save space.
 251   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
 252
 253   ## This PCD specifies whether PciBus supports the hot plug device.
 254   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
 255
 256   ## This PCD specifies whether the PCI bus driver probes non-standard,
 257   #  such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
 258   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x10000047
 259   ## This PCD specifies whether StatusCode is reported via Serial port.
 260   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
 261
 262   ## This PCD specifies whether StatusCode is stored in memory.
 263   #  The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
 264   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
 265
 266   ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.
 267   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
 268
 269   ## This PCD specified whether ACPI SDT protocol is installed.
 270   gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
 271
 272 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
 273   ##
 274   # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
 275   # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;
 276   # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
 277   # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
 278   # is built in firmware.
 279   #
 280   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
 281
 282 [PcdsFixedAtBuild]
 283   ## Dynamic type PCD can be registered callback function for Pcd setting action.
 284   #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
 285   #  for a dynamic PCD used in PEI phase.
 286   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
 287
 288   ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
 289   #  to store PCD value.
 290   #
 291   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
 292
 293   ## Maximum number of FV is supported by PeiCore's dispatching.
 294   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
 295
 296   ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
 297   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
 298
 299   ## Maximum stack size for PeiCore.
 300   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
 301
 302   ## Maximum PPI count is supported by PeiCore's PPI database.
 303   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
 304
 305   ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize
 306   #  The root cause is that variable driver will use FTW protocol to reclaim variable region.
 307   #  If the length of variable region is larger than FTW spare size, it means the whole variable region can not
 308   #  be reflushed through the manner of fault tolerant write.
 309   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
 310
 311   ## The maximum size of single common variable, that is non-HwErr type varible.
 312   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
 313
 314   ## The maximum size of single hardware error record variable.
 315   # In IA32/X64 platforms, this value should be larger than 1KB.
 316   # In IA64 platforms, this value should be larger than 128KB.
 317   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
 318
 319   ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize
 320   # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
 321   # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.
 322   # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
 323   gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
 324
 325   ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.
 326   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
 327
 328   ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize
 329   # The root cause is that variable driver will use FTW protocol to reclaim variable region.
 330   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
 331   # be reflushed through the manner of fault tolerant write.
 332   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
 333
 334   ## Size of the FTW working block range.
 335   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
 336
 337   ## FFS filename to find the ACPI tables
 338   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16
 339
 340   ## Single root I/O virtualization virtual function memory BAR alignment
 341   #  BITN set indicates 2 of n+12 power
 342   #  BIT0 set indicates 4KB alignment
 343   #  BIT1 set indicates 8KB alignment
 344   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
 345
 346   ## Flag of enabling/disabling the feature of Loading Module at Fixed Address
 347   #  -1: Enable the feature as fixed offset to TOLM
 348   #   0: Disable the feature.
 349   #  Positive Value:  Enable the feature as fixed absolute address, and the value is the top memory address
 350   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
 351
 352   ## Smbios version
 353   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0206|UINT16|0x00010055
 354
 355   ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
 356   #  to handle all link layers. If the value is non zero, the PCD value will be used as block size.
 357   #
 358   gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
 359
 360 [PcdsFixedAtBuild,PcdsPatchableInModule]
 361   ## Maximun number of performance log entries during PEI phase.
 362   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
 363
 364   ## RTC Update Timeout Value
 365   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
 366
 367 [PcdsPatchableInModule,PcdsDynamic]
 368   ## This PCD defines the Console output column and the default value is 25 according to UEFI spec
 369   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
 370
 371   ## This PCD defines the Console output row and the default value is 80 according to UEFI spec
 372   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
 373
 374 [PcdsFixedAtBuild,PcdsDynamic]
 375   ## Base address of the NV variable range in flash device
 376   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
 377
 378   ## Base address of the FTW spare block range in flash device.
 379   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
 380
 381   ## Base address of the FTW working block range in flash device.
 382   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
 383
 384   ## 64-bit Base address of the NV variable range in flash device
 385   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
 386
 387   ## 64-bit Base address of the FTW spare block range in flash device.
 388   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
 389
 390   ## 64-bit Base address of the FTW working block range in flash device.
 391   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
 392
 393   ## This PCD defines the print string.
 394   #  This PCD is a sample to explain String typed PCD usage.
 395   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
 396
 397   ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store
 398   #  The range is valid if non-zero.  The memory range size must be PcdVariableStoreSize.
 399   gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
 400
 401   ## This PCD specifies whether the Single Root I/O virtualization support.
 402   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
 403
 404   ## This PCD specifies whether the Alternative Routing-ID support.
 405   gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
 406
 407   ## This PCD specifies whether the Multi Root I/O virtualization support.
 408   gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
 409
 410 [PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]
 411   ## This PCD defines the times to print hello world string.
 412   #  This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
 413   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
 414
 415   ## Indicate the max size of the capsule image with reset flag that the platform can support.
 416   #  The default max size is 100MB (0x6400000) for more than one large capsule images.
 417   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
 418
 419   ## Indicate the max size of the capsule image without reset flag that the platform can support.
 420   #  The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
 421   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
 422
 423   ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
 424   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050
 425
 426   ## Firmware revision that is default value filled into the EFI System Table
 427   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
 428
 429   ## Null-terminated Unicode string that described the firmware version
 430   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
 431
 432   ## Null-terminated Unicode string that contains the date the formware was released
 433   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
 434
 435   ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true
 436   #  (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.
 437   #  The default value in PeiPhase is 1 KBytes.
 438   #  The default value in DxePhase is 128 KBytes.
 439   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
 440
 441 [PcdsPatchableInModule]
 442   ## Specify  memory size with page number for PEI code when
 443   #  the feature of Loading Module at Fixed Address is enabled
 444   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
 445
 446   ## Specify  memory size with page number for DXE boot time code when
 447   #  the feature of Loading Module at Fixed Address is enabled
 448   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
 449
 450   ## Specify  memory size with page number for DXE runtime code when
 451   #  the feature of Loading Module at Fixed Address is enabled
 452   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
 453
 454   ## Specify  memory size with page number for SMM code when
 455   #  the feature of Loading Module at Fixed Address is enabled
 456   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
 457