MdePkg/Include/Ppi/Smbus2.h

   1 /** @file
   2   This file declares Smbus2 PPI.
   3   This PPI provides the basic I/O interfaces that a PEIM uses to access its
   4   SMBus controller and the slave devices attached to it.
   5
   6   Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
   7   This program and the accompanying materials
   8   are licensed and made available under the terms and conditions of the BSD License
   9   which accompanies this distribution.  The full text of the license may be found at
  10   http://opensource.org/licenses/bsd-license.php
  11
  12   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  13   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  14
  15   @par Revision Reference:
  16   This PPI is introduced in PI Version 1.0.
  17
  18 **/
  19
  20 #ifndef __PEI_SMBUS2_PPI_H__
  21 #define __PEI_SMBUS2_PPI_H__
  22
  23 #include <IndustryStandard/SmBus.h>
  24
  25 #define EFI_PEI_SMBUS2_PPI_GUID \
  26   { 0x9ca93627, 0xb65b, 0x4324, { 0xa2, 0x2, 0xc0, 0xb4, 0x61, 0x76, 0x45, 0x43 } }
  27
  28
  29 typedef struct _EFI_PEI_SMBUS2_PPI EFI_PEI_SMBUS2_PPI;
  30
  31 /**
  32   Executes an SMBus operation to an SMBus controller. Returns when either
  33   the command has been executed or an error is encountered in doing the operation.
  34
  35   @param  This            A pointer to the EFI_PEI_SMBUS2_PPI instance.
  36   @param  SlaveAddress    The SMBUS hardware address to which the SMBUS device is preassigned or
  37                           allocated.
  38   @param  Command         This command is transmitted by the SMBus host controller to the SMBus slave
  39                           device and the interpretation is SMBus slave device specific.
  40                           It can mean the offset to a list of functions inside
  41                           an SMBus slave device. Not all operations or slave devices support
  42                           this command's registers.
  43   @param  Operation       Signifies which particular SMBus hardware protocol instance that it
  44                           will use to execute the SMBus transactions.
  45                           This SMBus hardware protocol is defined by the System Management Bus (SMBus)
  46                           Specification and is not related to UEFI.
  47   @param  PecCheck        Defines if Packet Error Code (PEC) checking is required for this operation.
  48   @param  Length          Signifies the number of bytes that this operation will do.
  49                           The maximum number of bytes can be revision specific and operation specific.
  50                           This parameter will contain the actual number of bytes that are executed
  51                           for this operation. Not all operations require this argument.
  52   @param  Buffer          Contains the value of data to execute to the SMBus slave device.
  53                           Not all operations require this argument.
  54                           The length of this buffer is identified by Length.
  55
  56
  57   @retval EFI_SUCCESS           The last data that was returned from the access
  58                                 matched the poll exit criteria.
  59   @retval EFI_CRC_ERROR         The checksum is not correct (PEC is incorrect)
  60   @retval EFI_TIMEOUT           Timeout expired before the operation was completed.
  61                                 Timeout is determined by the SMBus host controller device.
  62   @retval EFI_OUT_OF_RESOURCES  The request could not be completed
  63                                 due to a lack of resources.
  64   @retval EFI_DEVICE_ERROR      The request was not completed because
  65                                 a failure reflected in the Host Status Register bit.
  66   @retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.
  67                                 Or Length/Buffer is NULL for operations except for EfiSmbusQuickRead and
  68                                 EfiSmbusQuickWrite. Or Length is outside the range of valid values.
  69   @retval EFI_UNSUPPORTED       The SMBus operation or PEC is not supported.
  70   @retval EFI_BUFFER_TOO_SMALL  Buffer is not sufficient for this operation.
  71
  72 **/
  73 typedef
  74 EFI_STATUS
  75 (EFIAPI *EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION)(
  76   IN CONST  EFI_PEI_SMBUS2_PPI        *This,
  77   IN        EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,
  78   IN        EFI_SMBUS_DEVICE_COMMAND  Command,
  79   IN        EFI_SMBUS_OPERATION       Operation,
  80   IN        BOOLEAN                   PecCheck,
  81   IN OUT    UINTN                     *Length,
  82   IN OUT    VOID                      *Buffer
  83 );
  84
  85 /**
  86   The ArpDevice() function enumerates the entire bus or enumerates a specific
  87   device that is identified by SmbusUdid.
  88
  89   @param  This           A pointer to the EFI_PEI_SMBUS2_PPI instance.
  90   @param  ArpAll         A Boolean expression that indicates if the host drivers need
  91                          to enumerate all the devices or enumerate only the device that is identified
  92                          by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.
  93                          If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address
  94                          will be at SlaveAddress.
  95   @param  SmbusUdid      The targeted SMBus Unique Device Identifier (UDID).
  96                          The UDID may not exist for SMBus devices with fixed addresses.
  97   @param  SlaveAddress   The new SMBus address for the slave device for
  98                          which the operation is targeted.
  99
 100   @retval EFI_SUCCESS           The SMBus slave device address was set.
 101   @retval EFI_INVALID_PARAMETER SlaveAddress is NULL.
 102   @retval EFI_OUT_OF_RESOURCES  The request could not be completed
 103                                 due to a lack of resources.
 104   @retval EFI_TIMEOUT           The SMBus slave device did not respond.
 105   @retval EFI_DEVICE_ERROR      The request was not completed because the transaction failed.
 106   @retval EFI_UNSUPPORTED       ArpDevice, GetArpMap, and Notify are not implemented by this PEIM.
 107
 108 **/
 109 typedef
 110 EFI_STATUS
 111 (EFIAPI *EFI_PEI_SMBUS2_PPI_ARP_DEVICE)(
 112   IN CONST  EFI_PEI_SMBUS2_PPI        *This,
 113   IN        BOOLEAN                   ArpAll,
 114   IN        EFI_SMBUS_UDID            *SmbusUdid,   OPTIONAL
 115   IN OUT    EFI_SMBUS_DEVICE_ADDRESS  *SlaveAddress OPTIONAL
 116 );
 117
 118 /**
 119   The GetArpMap() function returns the mapping of all the SMBus devices
 120   that are enumerated by the SMBus host driver.
 121
 122   @param  This           A pointer to the EFI_PEI_SMBUS2_PPI instance.
 123   @param  Length         Size of the buffer that contains the SMBus device map.
 124   @param  SmbusDeviceMap The pointer to the device map as enumerated
 125                          by the SMBus controller driver.
 126
 127   @retval EFI_SUCCESS           The device map was returned correctly in the buffer.
 128   @retval EFI_UNSUPPORTED       ArpDevice, GetArpMap, and Notify are not implemented by this PEIM.
 129
 130 **/
 131 typedef
 132 EFI_STATUS
 133 (EFIAPI *EFI_PEI_SMBUS2_PPI_GET_ARP_MAP)(
 134   IN CONST  EFI_PEI_SMBUS2_PPI    *This,
 135   IN OUT    UINTN                 *Length,
 136   IN OUT    EFI_SMBUS_DEVICE_MAP  **SmbusDeviceMap
 137 );
 138
 139 /**
 140   CallBack function can be registered in EFI_PEI_SMBUS2_PPI_NOTIFY.
 141
 142   @param  This           A pointer to the EFI_PEI_SMBUS2_PPI instance.
 143   @param  SlaveAddress   The SMBUS hardware address to which the SMBUS
 144                          device is preassigned or allocated.
 145   @param  Data           Data of the SMBus host notify command that
 146                          the caller wants to be called.
 147
 148   @retval EFI_SUCCESS           NotifyFunction has been registered.
 149   @retval EFI_UNSUPPORTED       ArpDevice, GetArpMap, and Notify are not
 150                                 implemented by this PEIM.
 151
 152 **/
 153 typedef
 154 EFI_STATUS
 155 (EFIAPI *EFI_PEI_SMBUS_NOTIFY2_FUNCTION)(
 156   IN CONST  EFI_PEI_SMBUS2_PPI        *SmbusPpi,
 157   IN        EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,
 158   IN        UINTN                     Data
 159 );
 160
 161 /**
 162   The Notify() function registers all the callback functions to allow the
 163   bus driver to call these functions when the SlaveAddress/Data pair happens.
 164
 165   @param  This           A pointer to the EFI_PEI_SMBUS2_PPI instance.
 166   @param  SlaveAddress   Address that the host controller detects as
 167                          sending a message and calls all the registered functions.
 168   @param  Data           Data that the host controller detects as sending a message
 169                          and calls all the registered functions.
 170   @param  NotifyFunction The function to call when the bus driver
 171                          detects the SlaveAddress and Data pair.
 172
 173   @retval EFI_SUCCESS     NotifyFunction has been registered.
 174   @retval EFI_UNSUPPORTED ArpDevice, GetArpMap, and Notify are not
 175                           implemented by this PEIM.
 176 **/
 177 typedef
 178 EFI_STATUS
 179 (EFIAPI *EFI_PEI_SMBUS2_PPI_NOTIFY)(
 180   IN CONST EFI_PEI_SMBUS2_PPI              *This,
 181   IN       EFI_SMBUS_DEVICE_ADDRESS        SlaveAddress,
 182   IN       UINTN                           Data,
 183   IN       EFI_PEI_SMBUS_NOTIFY2_FUNCTION  NotifyFunction
 184 );
 185
 186 ///
 187 ///  Provides the basic I/O interfaces that a PEIM uses to access
 188 ///  its SMBus controller and the slave devices attached to it.
 189 ///
 190 struct _EFI_PEI_SMBUS2_PPI {
 191   EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION  Execute;
 192   EFI_PEI_SMBUS2_PPI_ARP_DEVICE         ArpDevice;
 193   EFI_PEI_SMBUS2_PPI_GET_ARP_MAP        GetArpMap;
 194   EFI_PEI_SMBUS2_PPI_NOTIFY             Notify;
 195   ///
 196   /// Identifier which uniquely identifies this SMBus controller in a system.
 197   ///
 198   EFI_GUID                              Identifier;
 199 };
 200
 201 extern EFI_GUID gEfiPeiSmbus2PpiGuid;
 202
 203 #endif