MdePkg/Include/Protocol/BlockIo.h

   1 /** @file
   2   Block IO protocol as defined in the UEFI 2.0 specification.
   3
   4   The Block IO protocol is used to abstract block devices like hard drives,
   5   DVD-ROMs and floppy drives.
   6
   7   Copyright (c) 2006 - 2008, Intel Corporation
   8   All rights reserved. This program and the accompanying materials
   9   are licensed and made available under the terms and conditions of the BSD License
  10   which accompanies this distribution.  The full text of the license may be found at
  11   http://opensource.org/licenses/bsd-license.php
  12
  13   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  14   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  15
  16 **/
  17
  18 #ifndef __BLOCK_IO_H__
  19 #define __BLOCK_IO_H__
  20
  21 #define EFI_BLOCK_IO_PROTOCOL_GUID \
  22   { \
  23     0x964e5b21, 0x6459, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
  24   }
  25
  26 typedef struct _EFI_BLOCK_IO_PROTOCOL  EFI_BLOCK_IO_PROTOCOL;
  27
  28 ///
  29 /// Protocol GUID name defined in EFI1.1.
  30 ///
  31 #define BLOCK_IO_PROTOCOL       EFI_BLOCK_IO_PROTOCOL_GUID
  32
  33 ///
  34 /// Protocol defined in EFI1.1.
  35 ///
  36 typedef EFI_BLOCK_IO_PROTOCOL   EFI_BLOCK_IO;
  37
  38 /**
  39   Reset the Block Device.
  40
  41   @param  This                 Protocol instance pointer.
  42   @param  ExtendedVerification Driver may perform diagnostics on reset.
  43
  44   @retval EFI_SUCCESS          The device was reset.
  45   @retval EFI_DEVICE_ERROR     The device is not functioning properly and could
  46                                not be reset.
  47
  48 **/
  49 typedef
  50 EFI_STATUS
  51 (EFIAPI *EFI_BLOCK_RESET)(
  52   IN EFI_BLOCK_IO_PROTOCOL          *This,
  53   IN BOOLEAN                        ExtendedVerification
  54   );
  55
  56 /**
  57   Read BufferSize bytes from Lba into Buffer.
  58
  59   @param  This       Protocol instance pointer.
  60   @param  MediaId    Id of the media, changes every time the media is replaced.
  61   @param  Lba        The starting Logical Block Address to read from
  62   @param  BufferSize Size of Buffer, must be a multiple of device block size.
  63   @param  Buffer     Buffer containing read data
  64
  65   @retval EFI_SUCCESS           The data was read correctly from the device.
  66   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
  67   @retval EFI_NO_MEDIA          There is no media in the device.
  68   @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.
  69   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  70   @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
  71                                 valid for the device.
  72
  73 **/
  74 typedef
  75 EFI_STATUS
  76 (EFIAPI *EFI_BLOCK_READ)(
  77   IN EFI_BLOCK_IO_PROTOCOL          *This,
  78   IN UINT32                         MediaId,
  79   IN EFI_LBA                        Lba,
  80   IN UINTN                          BufferSize,
  81   OUT VOID                          *Buffer
  82   );
  83
  84 /**
  85   Write BufferSize bytes from Lba into Buffer.
  86
  87   @param  This       Protocol instance pointer.
  88   @param  MediaId    Id of the media, changes every time the media is replaced.
  89   @param  Lba        The starting Logical Block Address to read from
  90   @param  BufferSize Size of Buffer, must be a multiple of device block size.
  91   @param  Buffer     Buffer containing read data
  92
  93   @retval EFI_SUCCESS           The data was written correctly to the device.
  94   @retval EFI_WRITE_PROTECTED   The device can not be written to.
  95   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  96   @retval EFI_NO_MEDIA          There is no media in the device.
  97   @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
  98   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  99   @retval EFI_INVALID_PARAMETER The write request contains a LBA that is not
 100                                 valid for the device.
 101
 102 **/
 103 typedef
 104 EFI_STATUS
 105 (EFIAPI *EFI_BLOCK_WRITE)(
 106   IN EFI_BLOCK_IO_PROTOCOL          *This,
 107   IN UINT32                         MediaId,
 108   IN EFI_LBA                        Lba,
 109   IN UINTN                          BufferSize,
 110   IN VOID                           *Buffer
 111   );
 112
 113 /**
 114   Flush the Block Device.
 115
 116   @param  This              Protocol instance pointer.
 117
 118   @retval EFI_SUCCESS       All outstanding data was written to the device
 119   @retval EFI_DEVICE_ERROR  The device reported an error while writting back the data
 120   @retval EFI_NO_MEDIA      There is no media in the device.
 121
 122 **/
 123 typedef
 124 EFI_STATUS
 125 (EFIAPI *EFI_BLOCK_FLUSH)(
 126   IN EFI_BLOCK_IO_PROTOCOL  *This
 127   );
 128
 129 /**
 130   Block IO read only mode data and updated only via members of BlockIO
 131 **/
 132 typedef struct {
 133   ///
 134   /// The curent media Id. If the media changes, this value is changed.
 135   ///
 136   UINT32  MediaId;
 137
 138   ///
 139   /// TRUE if the media is removable; otherwise, FALSE.
 140   ///
 141   BOOLEAN RemovableMedia;
 142
 143   ///
 144   /// TRUE if there is a media currently present in the device;
 145   /// othersise, FALSE. THis field shows the media present status
 146   /// as of the most recent ReadBlocks() or WriteBlocks() call.
 147   ///
 148   BOOLEAN MediaPresent;
 149
 150   ///
 151   /// TRUE if LBA 0 is the first block of a partition; otherwise
 152   /// FALSE. For media with only one partition this would be TRUE.
 153   ///
 154   BOOLEAN LogicalPartition;
 155
 156   ///
 157   /// TRUE if the media is marked read-only otherwise, FALSE.
 158   /// This field shows the read-only status as of the most recent WriteBlocks () call.
 159   ///
 160   BOOLEAN ReadOnly;
 161
 162   ///
 163   /// TRUE if the WriteBlock () function caches write data.
 164   ///
 165   BOOLEAN WriteCaching;
 166
 167   ///
 168   /// The intrinsic block size of the device. If the media changes, then
 169   /// this field is updated.
 170   ///
 171   UINT32  BlockSize;
 172
 173   ///
 174   /// Supplies the alignment requirement for any buffer to read or write block(s).
 175   ///
 176   UINT32  IoAlign;
 177
 178   ///
 179   /// The last logical block address on the device.
 180   /// If the media changes, then this field is updated.
 181   ///
 182   EFI_LBA LastBlock;
 183 } EFI_BLOCK_IO_MEDIA;
 184
 185 #define EFI_BLOCK_IO_PROTOCOL_REVISION  0x00010000
 186
 187 ///
 188 /// Revision defined in EFI1.1.
 189 ///
 190 #define EFI_BLOCK_IO_INTERFACE_REVISION   EFI_BLOCK_IO_PROTOCOL_REVISION
 191
 192 ///
 193 ///  This protocol provides control over block devices.
 194 ///
 195 struct _EFI_BLOCK_IO_PROTOCOL {
 196   ///
 197   /// The revision to which the block IO interface adheres. All future
 198   /// revisions must be backwards compatible. If a future version is not
 199   /// back wards compatible, it is not the same GUID.
 200   ///
 201   UINT64              Revision;
 202   ///
 203   /// Pointer to the EFI_BLOCK_IO_MEDIA data for this device.
 204   ///
 205   EFI_BLOCK_IO_MEDIA  *Media;
 206
 207   EFI_BLOCK_RESET     Reset;
 208   EFI_BLOCK_READ      ReadBlocks;
 209   EFI_BLOCK_WRITE     WriteBlocks;
 210   EFI_BLOCK_FLUSH     FlushBlocks;
 211
 212 };
 213
 214 extern EFI_GUID gEfiBlockIoProtocolGuid;
 215
 216 #endif