]> git.proxmox.com Git - mirror_edk2.git/blob - MdePkg/Include/Protocol/Ip4Config.h
Update the copyright notice format
[mirror_edk2.git] / MdePkg / Include / Protocol / Ip4Config.h
1 /** @file
2 This file provides a definition of the EFI IPv4 Configuration
3 Protocol.
4
5 Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
6 This program and the accompanying materials are licensed and made available under
7 the terms and conditions of the BSD License that accompanies this distribution.
8 The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php.
10
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
13
14 @par Revision Reference:
15 This Protocol is introduced in UEFI Specification 2.0.
16
17 **/
18 #ifndef __EFI_IP4CONFIG_PROTOCOL_H__
19 #define __EFI_IP4CONFIG_PROTOCOL_H__
20
21 #include <Protocol/Ip4.h>
22
23 #define EFI_IP4_CONFIG_PROTOCOL_GUID \
24 { \
25 0x3b95aa31, 0x3793, 0x434b, {0x86, 0x67, 0xc8, 0x07, 0x08, 0x92, 0xe0, 0x5e } \
26 }
27
28 typedef struct _EFI_IP4_CONFIG_PROTOCOL EFI_IP4_CONFIG_PROTOCOL;
29
30 #define IP4_CONFIG_VARIABLE_ATTRIBUTES \
31 (EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | \
32 EFI_VARIABLE_RUNTIME_ACCESS)
33
34 ///
35 /// EFI_IP4_IPCONFIG_DATA contains the minimum IPv4 configuration data
36 /// that is needed to start basic network communication. The StationAddress
37 /// and SubnetMask must be a valid unicast IP address and subnet mask.
38 /// If RouteTableSize is not zero, then RouteTable contains a properly
39 /// formatted routing table for the StationAddress/SubnetMask, with the
40 /// last entry in the table being the default route.
41 ///
42 typedef struct {
43 ///
44 /// Default station IP address, stored in network byte order.
45 ///
46 EFI_IPv4_ADDRESS StationAddress;
47 ///
48 /// Default subnet mask, stored in network byte order.
49 ///
50 EFI_IPv4_ADDRESS SubnetMask;
51 ///
52 /// Number of entries in the following RouteTable. May be zero.
53 ///
54 UINT32 RouteTableSize;
55 ///
56 /// Default routing table data (stored in network byte order).
57 /// Ignored if RouteTableSize is zero.
58 ///
59 EFI_IP4_ROUTE_TABLE *RouteTable;
60 } EFI_IP4_IPCONFIG_DATA;
61
62
63 /**
64 Starts running the configuration policy for the EFI IPv4 Protocol driver.
65
66 The Start() function is called to determine and to begin the platform
67 configuration policy by the EFI IPv4 Protocol driver. This determination may
68 be as simple as returning EFI_UNSUPPORTED if there is no EFI IPv4 Protocol
69 driver configuration policy. It may be as involved as loading some defaults
70 from nonvolatile storage, downloading dynamic data from a DHCP server, and
71 checking permissions with a site policy server.
72 Starting the configuration policy is just the beginning. It may finish almost
73 instantly or it may take several minutes before it fails to retrieve configuration
74 information from one or more servers. Once the policy is started, drivers
75 should use the DoneEvent parameter to determine when the configuration policy
76 has completed. EFI_IP4_CONFIG_PROTOCOL.GetData() must then be called to
77 determine if the configuration succeeded or failed.
78 Until the configuration completes successfully, EFI IPv4 Protocol driver instances
79 that are attempting to use default configurations must return EFI_NO_MAPPING.
80 Once the configuration is complete, the EFI IPv4 Configuration Protocol driver
81 signals DoneEvent. The configuration may need to be updated in the future.
82 Note that in this case the EFI IPv4 Configuration Protocol driver must signal
83 ReconfigEvent, and all EFI IPv4 Protocol driver instances that are using default
84 configurations must return EFI_NO_MAPPING until the configuration policy has
85 been rerun.
86
87 @param This The pointer to the EFI_IP4_CONFIG_PROTOCOL instance.
88 @param DoneEvent Event that will be signaled when the EFI IPv4
89 Protocol driver configuration policy completes
90 execution. This event must be of type EVT_NOTIFY_SIGNAL.
91 @param ReconfigEvent Event that will be signaled when the EFI IPv4
92 Protocol driver configuration needs to be updated.
93 This event must be of type EVT_NOTIFY_SIGNAL.
94
95 @retval EFI_SUCCESS The configuration policy for the EFI IPv4 Protocol
96 driver is now running.
97 @retval EFI_INVALID_PARAMETER One or more of the following parameters is NULL:
98 This
99 DoneEvent
100 ReconfigEvent
101 @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
102 @retval EFI_ALREADY_STARTED The configuration policy for the EFI IPv4 Protocol
103 driver was already started.
104 @retval EFI_DEVICE_ERROR An unexpected system error or network error occurred.
105 @retval EFI_UNSUPPORTED This interface does not support the EFI IPv4 Protocol
106 driver configuration.
107
108 **/
109 typedef
110 EFI_STATUS
111 (EFIAPI *EFI_IP4_CONFIG_START)(
112 IN EFI_IP4_CONFIG_PROTOCOL *This,
113 IN EFI_EVENT DoneEvent,
114 IN EFI_EVENT ReconfigEvent
115 );
116
117 /**
118 Stops running the configuration policy for the EFI IPv4 Protocol driver.
119
120 The Stop() function stops the configuration policy for the EFI IPv4 Protocol driver.
121 All configuration data will be lost after calling Stop().
122
123 @param This The pointer to the EFI_IP4_CONFIG_PROTOCOL instance.
124
125 @retval EFI_SUCCESS The configuration policy for the EFI IPv4 Protocol
126 driver has been stopped.
127 @retval EFI_INVALID_PARAMETER This is NULL.
128 @retval EFI_NOT_STARTED The configuration policy for the EFI IPv4 Protocol
129 driver was not started.
130
131 **/
132 typedef
133 EFI_STATUS
134 (EFIAPI *EFI_IP4_CONFIG_STOP)(
135 IN EFI_IP4_CONFIG_PROTOCOL *This
136 );
137
138 /**
139 Returns the default configuration data (if any) for the EFI IPv4 Protocol driver.
140
141 The GetData() function returns the current configuration data for the EFI IPv4
142 Protocol driver after the configuration policy has completed.
143
144 @param This The pointer to the EFI_IP4_CONFIG_PROTOCOL instance.
145 @param IpConfigDataSize On input, the size of the IpConfigData buffer.
146 On output, the count of bytes that were written
147 into the IpConfigData buffer.
148 @param IpConfigData The pointer to the EFI IPv4 Configuration Protocol
149 driver configuration data structure.
150 Type EFI_IP4_IPCONFIG_DATA is defined in
151 "Related Definitions" below.
152
153 @retval EFI_SUCCESS The EFI IPv4 Protocol driver configuration has been returned.
154 @retval EFI_INVALID_PARAMETER This is NULL.
155 @retval EFI_NOT_STARTED The configuration policy for the EFI IPv4 Protocol
156 driver is not running.
157 @retval EFI_NOT_READY EFI IPv4 Protocol driver configuration is still running.
158 @retval EFI_ABORTED EFI IPv4 Protocol driver configuration could not complete.
159 @retval EFI_BUFFER_TOO_SMALL *IpConfigDataSize is smaller than the configuration
160 data buffer or IpConfigData is NULL.
161
162 **/
163 typedef
164 EFI_STATUS
165 (EFIAPI *EFI_IP4_CONFIG_GET_DATA)(
166 IN EFI_IP4_CONFIG_PROTOCOL *This,
167 IN OUT UINTN *IpConfigDataSize,
168 OUT EFI_IP4_IPCONFIG_DATA *IpConfigData OPTIONAL
169 );
170
171 ///
172 /// The EFI_IP4_CONFIG_PROTOCOL driver performs platform-dependent and policy-dependent
173 /// configurations for the EFI IPv4 Protocol driver.
174 ///
175 struct _EFI_IP4_CONFIG_PROTOCOL {
176 EFI_IP4_CONFIG_START Start;
177 EFI_IP4_CONFIG_STOP Stop;
178 EFI_IP4_CONFIG_GET_DATA GetData;
179 };
180
181 extern EFI_GUID gEfiIp4ConfigProtocolGuid;
182
183 #endif