2 EFI_USB2_HC_PROTOCOL as defined in UEFI 2.0.
4 Copyright (c) 2006, Intel Corporation
5 All rights reserved. This program and the accompanying materials
6 are licensed and made available under the terms and conditions of the BSD License
7 which accompanies this distribution. The full text of the license may be found at
8 http://opensource.org/licenses/bsd-license.php
10 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
11 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
15 #ifndef _USB2_HOSTCONTROLLER_H_
16 #define _USB2_HOSTCONTROLLER_H_
18 #include <IndustryStandard/Usb.h>
19 #include <Protocol/UsbIo.h>
21 #define EFI_USB2_HC_PROTOCOL_GUID \
23 0x3e745226, 0x9818, 0x45b6, {0xa2, 0xac, 0xd7, 0xcd, 0xe, 0x8b, 0xa2, 0xbc } \
27 // Forward reference for pure ANSI compatability
29 typedef struct _EFI_USB2_HC_PROTOCOL EFI_USB2_HC_PROTOCOL
;
34 UINT16 PortChangeStatus
;
35 } EFI_USB_PORT_STATUS
;
38 // Constant value for Port Status & Port Change Status
40 #define USB_PORT_STAT_CONNECTION 0x0001
41 #define USB_PORT_STAT_ENABLE 0x0002
42 #define USB_PORT_STAT_SUSPEND 0x0004
43 #define USB_PORT_STAT_OVERCURRENT 0x0008
44 #define USB_PORT_STAT_RESET 0x0010
45 #define USB_PORT_STAT_POWER 0x0100
46 #define USB_PORT_STAT_LOW_SPEED 0x0200
47 #define USB_PORT_STAT_HIGH_SPEED 0x0400
48 #define USB_PORT_STAT_OWNER 0x0800
50 #define USB_PORT_STAT_C_CONNECTION 0x0001
51 #define USB_PORT_STAT_C_ENABLE 0x0002
52 #define USB_PORT_STAT_C_SUSPEND 0x0004
53 #define USB_PORT_STAT_C_OVERCURRENT 0x0008
54 #define USB_PORT_STAT_C_RESET 0x0010
62 EfiUsbPortSuspend
= 2,
66 EfiUsbPortConnectChange
= 16,
67 EfiUsbPortEnableChange
= 17,
68 EfiUsbPortSuspendChange
= 18,
69 EfiUsbPortOverCurrentChange
= 19,
70 EfiUsbPortResetChange
= 20
71 } EFI_USB_PORT_FEATURE
;
74 #define EFI_USB_SPEED_FULL 0x0000 // 12 Mb/s, USB 1.1 OHCI and UHCI HC.
75 #define EFI_USB_SPEED_LOW 0x0001 // 1 Mb/s, USB 1.1 OHCI and UHCI HC.
76 #define EFI_USB_SPEED_HIGH 0x0002 // 480 Mb/s, USB 2.0 EHCI HC.
79 UINT8 TranslatorHubAddress
;
80 UINT8 TranslatorPortNumber
;
81 } EFI_USB2_HC_TRANSACTION_TRANSLATOR
;
84 // Protocol definitions
88 Retrieves the Host Controller capabilities.
90 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
91 @param MaxSpeed Host controller data transfer speed.
92 @param PortNumber Number of the root hub ports.
93 @param Is64BitCapable TRUE if controller supports 64-bit memory addressing,
96 @retval EFI_SUCCESS The host controller capabilities were retrieved successfully.
97 @retval EFI_INVALID_PARAMETER One of the input args was NULL.
98 @retval EFI_DEVICE_ERROR An error was encountered while attempting to
99 retrieve the capabilities.
104 (EFIAPI
*EFI_USB2_HC_PROTOCOL_GET_CAPABILITY
) (
105 IN EFI_USB2_HC_PROTOCOL
*This
,
107 OUT UINT8
*PortNumber
,
108 OUT UINT8
*Is64BitCapable
112 #define EFI_USB_HC_RESET_GLOBAL 0x0001
113 #define EFI_USB_HC_RESET_HOST_CONTROLLER 0x0002
114 #define EFI_USB_HC_RESET_GLOBAL_WITH_DEBUG 0x0004
115 #define EFI_USB_HC_RESET_HOST_WITH_DEBUG 0x0008
117 Provides software reset for the USB host controller.
119 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
120 @param Attributes A bit mask of the reset operation to perform.
122 @retval EFI_SUCCESS The reset operation succeeded.
123 @retval EFI_INVALID_PARAMETER Attributes is not valid.
124 @retval EFI_UNSUPPORTED The type of reset specified by Attributes is not currently
125 supported by the host controller hardware.
126 @retval EFI_ACCESS_DENIED Reset operation is rejected due to the debug port being configured
127 and active; only EFI_USB_HC_RESET_GLOBAL_WITH_DEBUG or
128 EFI_USB_HC_RESET_HOST_WITH_DEBUG reset Attributes can be used to
129 perform reset operation for this host controller.
130 @retval EFI_DEVICE_ERROR An error was encountered while attempting to
131 retrieve the capabilities.
136 (EFIAPI
*EFI_USB2_HC_PROTOCOL_RESET
) (
137 IN EFI_USB2_HC_PROTOCOL
*This
,
144 @param EfiUsbHcStateHalt The host controller is in halt
145 state. No USB transactions can occur
146 while in this state. The host
147 controller can enter this state for
148 three reasons: 1) After host
149 controller hardware reset. 2)
150 Explicitly set by software. 3)
151 Triggered by a fatal error such as
152 consistency check failure.
155 @param EfiUsbHcStateOperational The host controller is in an
156 operational state. When in
158 controller can execute bus
159 traffic. This state must be
160 explicitly set to enable the
164 @param EfiUsbHcStateSuspend The host controller is in the
165 suspend state. No USB
166 transactions can occur while in
167 this state. The host controller
168 enters this state for the
169 following reasons: 1) Explicitly
170 set by software. 2) Triggered
171 when there is no bus traffic for
177 EfiUsbHcStateOperational
,
178 EfiUsbHcStateSuspend
,
183 Retrieves current state of the USB host controller.
185 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
186 @param State A pointer to the EFI_USB_HC_STATE data structure that
187 indicates current state of the USB host controller.
189 @retval EFI_SUCCESS The state information of the host controller was returned in State.
190 @retval EFI_INVALID_PARAMETER State is NULL.
191 @retval EFI_DEVICE_ERROR An error was encountered while attempting to retrieve the
192 host controller's current state.
197 (EFIAPI
*EFI_USB2_HC_PROTOCOL_GET_STATE
) (
198 IN CONST EFI_USB2_HC_PROTOCOL
*This
,
199 OUT EFI_USB_HC_STATE
*State
204 Sets the USB host controller to a specific state.
206 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
207 @param State Indicates the state of the host controller that will be set.
209 @retval EFI_SUCCESS The USB host controller was successfully placed in the state
211 @retval EFI_INVALID_PARAMETER State is not valid.
212 @retval EFI_DEVICE_ERROR Failed to set the state specified by State due to device error.
217 (EFIAPI
*EFI_USB2_HC_PROTOCOL_SET_STATE
) (
218 IN EFI_USB2_HC_PROTOCOL
*This
,
219 IN EFI_USB_HC_STATE State
224 Submits control transfer to a target USB device.
226 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
227 @param DeviceAddress Represents the address of the target device on the USB.
228 @param DeviceSpeed Indicates device speed.
229 @param MaximumPacketLength Indicates the maximum packet size that the default control transfer
230 endpoint is capable of sending or receiving.
231 @param Request A pointer to the USB device request that will be sent to the USB device.
232 @param TransferDirection Specifies the data direction for the transfer. There are three values
233 available, EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData.
234 @param Data A pointer to the buffer of data that will be transmitted to USB device or
235 received from USB device.
236 @param DataLength On input, indicates the size, in bytes, of the data buffer specified by Data.
237 On output, indicates the amount of data actually transferred.
238 @param Translator A pointer to the transaction translator data.
239 @param TimeOut Indicates the maximum time, in milliseconds, which the transfer is
241 @param TransferResult A pointer to the detailed result information generated by this control
244 @retval EFI_SUCCESS The control transfer was completed successfully.
245 @retval EFI_INVALID_PARAMETER Some parameters are invalid.
246 @retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due to a lack of resources.
247 @retval EFI_TIMEOUT The control transfer failed due to timeout.
248 @retval EFI_DEVICE_ERROR The control transfer failed due to host controller or device error.
249 Caller should check TransferResult for detailed error information.
254 (EFIAPI
*EFI_USB2_HC_PROTOCOL_CONTROL_TRANSFER
) (
255 IN EFI_USB2_HC_PROTOCOL
*This
,
256 IN UINT8 DeviceAddress
,
257 IN UINT8 DeviceSpeed
,
258 IN UINTN MaximumPacketLength
,
259 IN EFI_USB_DEVICE_REQUEST
*Request
,
260 IN EFI_USB_DATA_DIRECTION TransferDirection
,
261 IN OUT VOID
*Data OPTIONAL
,
262 IN OUT UINTN
*DataLength OPTIONAL
,
264 IN EFI_USB2_HC_TRANSACTION_TRANSLATOR
*Translator
,
265 OUT UINT32
*TransferResult
269 #define EFI_USB_MAX_BULK_BUFFER_NUM 10
272 Submits bulk transfer to a bulk endpoint of a USB device.
274 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
275 @param DeviceAddress Represents the address of the target device on the USB.
276 @param EndPointAddress The combination of an endpoint number and an endpoint direction of the
278 @param DeviceSpeed Indicates device speed.
279 @param MaximumPacketLength Indicates the maximum packet size the target endpoint is capable of
280 sending or receiving.
281 @param DataBuffersNumber Number of data buffers prepared for the transfer.
282 @param Data Array of pointers to the buffers of data that will be transmitted to USB
283 device or received from USB device.
284 @param DataLength When input, indicates the size, in bytes, of the data buffers specified by
285 Data. When output, indicates the actually transferred data size.
286 @param DataToggle A pointer to the data toggle value.
287 @param Translator A pointer to the transaction translator data.
288 @param TimeOut Indicates the maximum time, in milliseconds, which the transfer is
290 @param TransferResult A pointer to the detailed result information of the bulk transfer.
292 @retval EFI_SUCCESS The bulk transfer was completed successfully.
293 @retval EFI_INVALID_PARAMETER Some parameters are invalid.
294 @retval EFI_OUT_OF_RESOURCES The bulk transfer could not be submitted due to a lack of resources.
295 @retval EFI_TIMEOUT The bulk transfer failed due to timeout.
296 @retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.
297 Caller should check TransferResult for detailed error information.
302 (EFIAPI
*EFI_USB2_HC_PROTOCOL_BULK_TRANSFER
) (
303 IN EFI_USB2_HC_PROTOCOL
*This
,
304 IN UINT8 DeviceAddress
,
305 IN UINT8 EndPointAddress
,
306 IN UINT8 DeviceSpeed
,
307 IN UINTN MaximumPacketLength
,
308 IN UINT8 DataBuffersNumber
,
309 IN OUT VOID
*Data
[EFI_USB_MAX_BULK_BUFFER_NUM
],
310 IN OUT UINTN
*DataLength
,
311 IN OUT UINT8
*DataToggle
,
313 IN EFI_USB2_HC_TRANSACTION_TRANSLATOR
*Translator
,
314 OUT UINT32
*TransferResult
319 Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device.
320 Translator parameter doesn't exist in UEFI2.0 spec, but it will be updated in the following specification version.
322 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
323 @param DeviceAddress Represents the address of the target device on the USB.
324 @param EndPointAddress The combination of an endpoint number and an endpoint direction of the
326 @param DeviceSpeed Indicates device speed.
327 @param MaximumPacketLength Indicates the maximum packet size the target endpoint is capable of
328 sending or receiving.
329 @param IsNewTransfer If TRUE, an asynchronous interrupt pipe is built between the host and the
330 target interrupt endpoint. If FALSE, the specified asynchronous interrupt
331 pipe is canceled. If TRUE, and an interrupt transfer exists for the target
332 end point, then EFI_INVALID_PARAMETER is returned.
333 @param DataToggle A pointer to the data toggle value.
334 @param PollingInterval Indicates the interval, in milliseconds, that the asynchronous interrupt
336 @param DataLength Indicates the length of data to be received at the rate specified by
337 PollingInterval from the target asynchronous interrupt endpoint.
338 @param Translator A pointr to the transaction translator data.
339 @param CallBackFunction The Callback function. This function is called at the rate specified by
341 @param Context The context that is passed to the CallBackFunction. This is an
342 optional parameter and may be NULL.
344 @retval EFI_SUCCESS The asynchronous interrupt transfer request has been successfully
345 submitted or canceled.
346 @retval EFI_INVALID_PARAMETER Some parameters are invalid.
347 @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
352 (EFIAPI
*EFI_USB2_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER
) (
353 IN EFI_USB2_HC_PROTOCOL
*This
,
354 IN UINT8 DeviceAddress
,
355 IN UINT8 EndPointAddress
,
356 IN UINT8 DeviceSpeed
,
357 IN UINTN MaxiumPacketLength
,
358 IN BOOLEAN IsNewTransfer
,
359 IN OUT UINT8
*DataToggle
,
360 IN UINTN PollingInterval OPTIONAL
,
361 IN UINTN DataLength OPTIONAL
,
362 IN EFI_USB2_HC_TRANSACTION_TRANSLATOR
*Translator OPTIONAL
,
363 IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction OPTIONAL
,
364 IN VOID
*Context OPTIONAL
369 Submits synchronous interrupt transfer to an interrupt endpoint of a USB device.
370 Translator parameter doesn't exist in UEFI2.0 spec, but it will be updated in the following specification version.
372 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
373 @param DeviceAddress Represents the address of the target device on the USB.
374 @param EndPointAddress The combination of an endpoint number and an endpoint direction of the
376 @param DeviceSpeed Indicates device speed.
377 @param MaximumPacketLength Indicates the maximum packet size the target endpoint is capable of
378 sending or receiving.
379 @param Data A pointer to the buffer of data that will be transmitted to USB device or
380 received from USB device.
381 @param DataLength On input, the size, in bytes, of the data buffer specified by Data. On
382 output, the number of bytes transferred.
383 @param DataToggle A pointer to the data toggle value.
384 @param TimeOut Indicates the maximum time, in milliseconds, which the transfer is
386 @param Translator A pointr to the transaction translator data.
387 @param TransferResult A pointer to the detailed result information from the synchronous
390 @retval EFI_SUCCESS The synchronous interrupt transfer was completed successfully.
391 @retval EFI_INVALID_PARAMETER Some parameters are invalid.
392 @retval EFI_OUT_OF_RESOURCES The synchronous interrupt transfer could not be submitted due to a lack of resources.
393 @retval EFI_TIMEOUT The synchronous interrupt transfer failed due to timeout.
394 @retval EFI_DEVICE_ERROR The synchronous interrupt transfer failed due to host controller or device error.
395 Caller should check TransferResult for detailed error information.
400 (EFIAPI
*EFI_USB2_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER
) (
401 IN EFI_USB2_HC_PROTOCOL
*This
,
402 IN UINT8 DeviceAddress
,
403 IN UINT8 EndPointAddress
,
404 IN UINT8 DeviceSpeed
,
405 IN UINTN MaximumPacketLength
,
407 IN OUT UINTN
*DataLength
,
408 IN OUT UINT8
*DataToggle
,
410 IN EFI_USB2_HC_TRANSACTION_TRANSLATOR
*Translator
,
411 OUT UINT32
*TransferResult
415 #define EFI_USB_MAX_ISO_BUFFER_NUM 7
416 #define EFI_USB_MAX_ISO_BUFFER_NUM1 2
419 Submits isochronous transfer to an isochronous endpoint of a USB device.
421 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
422 @param DeviceAddress Represents the address of the target device on the USB.
423 @param EndPointAddress The combination of an endpoint number and an endpoint direction of the
425 @param DeviceSpeed Indicates device speed.
426 @param MaximumPacketLength Indicates the maximum packet size the target endpoint is capable of
427 sending or receiving.
428 @param DataBuffersNumber Number of data buffers prepared for the transfer.
429 @param Data Array of pointers to the buffers of data that will be transmitted to USB
430 device or received from USB device.
431 @param DataLength Specifies the length, in bytes, of the data to be sent to or received from
433 @param Translator A pointer to the transaction translator data.
434 @param TransferResult A pointer to the detailed result information of the isochronous transfer.
436 @retval EFI_SUCCESS The isochronous transfer was completed successfully.
437 @retval EFI_INVALID_PARAMETER Some parameters are invalid.
438 @retval EFI_OUT_OF_RESOURCES The isochronous transfer could not be submitted due to a lack of resources.
439 @retval EFI_TIMEOUT The isochronous transfer cannot be completed within the one USB frame time.
440 @retval EFI_DEVICE_ERROR The isochronous transfer failed due to host controller or device error.
441 Caller should check TransferResult for detailed error information.
446 (EFIAPI
*EFI_USB2_HC_PROTOCOL_ISOCHRONOUS_TRANSFER
) (
447 IN EFI_USB2_HC_PROTOCOL
*This
,
448 IN UINT8 DeviceAddress
,
449 IN UINT8 EndPointAddress
,
450 IN UINT8 DeviceSpeed
,
451 IN UINTN MaximumPacketLength
,
452 IN UINT8 DataBuffersNumber
,
453 IN OUT VOID
*Data
[EFI_USB_MAX_ISO_BUFFER_NUM
],
455 IN EFI_USB2_HC_TRANSACTION_TRANSLATOR
*Translator
,
456 OUT UINT32
*TransferResult
461 Submits nonblocking isochronous transfer to an isochronous endpoint of a USB device.
463 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
464 @param DeviceAddress Represents the address of the target device on the USB.
465 @param EndPointAddress The combination of an endpoint number and an endpoint direction of the
467 @param DeviceSpeed Indicates device speed.
468 @param MaximumPacketLength Indicates the maximum packet size the target endpoint is capable of
469 sending or receiving.
470 @param DataBuffersNumber Number of data buffers prepared for the transfer.
471 @param Data Array of pointers to the buffers of data that will be transmitted to USB
472 device or received from USB device.
473 @param DataLength Specifies the length, in bytes, of the data to be sent to or received from
475 @param Translator A pointer to the transaction translator data.
476 @param IsochronousCallback The Callback function. This function is called if the requested
477 isochronous transfer is completed.
478 @param Context Data passed to the IsochronousCallback function. This is an
479 optional parameter and may be NULL.
481 @retval EFI_SUCCESS The asynchronous isochronous transfer request has been successfully
482 submitted or canceled.
483 @retval EFI_INVALID_PARAMETER Some parameters are invalid.
484 @retval EFI_OUT_OF_RESOURCES The asynchronous isochronous transfer could not be submitted due to
490 (EFIAPI
*EFI_USB2_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER
) (
491 IN EFI_USB2_HC_PROTOCOL
*This
,
492 IN UINT8 DeviceAddress
,
493 IN UINT8 EndPointAddress
,
494 IN UINT8 DeviceSpeed
,
495 IN UINTN MaximumPacketLength
,
496 IN UINT8 DataBuffersNumber
,
497 IN OUT VOID
*Data
[EFI_USB_MAX_ISO_BUFFER_NUM
],
499 IN EFI_USB2_HC_TRANSACTION_TRANSLATOR
*Translator
,
500 IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack
,
501 IN VOID
*Context OPTIONAL
506 Retrieves the current status of a USB root hub port.
508 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
509 @param PortNumber Specifies the root hub port from which the status is to be retrieved.
510 This value is zero based.
511 @param PortStatus A pointer to the current port status bits and port status change bits.
513 @retval EFI_SUCCESS The status of the USB root hub port specified by PortNumber
514 was returned in PortStatus.
515 @retval EFI_INVALID_PARAMETER PortNumber is invalid.
520 (EFIAPI
*EFI_USB2_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS
) (
521 IN CONST EFI_USB2_HC_PROTOCOL
*This
,
522 IN CONST UINT8 PortNumber
,
523 OUT EFI_USB_PORT_STATUS
*PortStatus
528 Sets a feature for the specified root hub port.
530 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
531 @param PortNumber Specifies the root hub port whose feature is requested to be set. This
533 @param PortFeature Indicates the feature selector associated with the feature set request.
535 @retval EFI_SUCCESS The feature specified by PortFeature was set for the USB
536 root hub port specified by PortNumber.
537 @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function.
542 (EFIAPI
*EFI_USB2_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE
) (
543 IN EFI_USB2_HC_PROTOCOL
*This
,
545 IN EFI_USB_PORT_FEATURE PortFeature
550 Clears a feature for the specified root hub port.
552 @param This A pointer to the EFI_USB2_HC_PROTOCOL instance.
553 @param PortNumber Specifies the root hub port whose feature is requested to be cleared. This
555 @param PortFeature Indicates the feature selector associated with the feature clear request.
557 @retval EFI_SUCCESS The feature specified by PortFeature was cleared for the USB
558 root hub port specified by PortNumber.
559 @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function.
564 (EFIAPI
*EFI_USB2_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE
) (
565 IN EFI_USB2_HC_PROTOCOL
*This
,
567 IN EFI_USB_PORT_FEATURE PortFeature
571 struct _EFI_USB2_HC_PROTOCOL
{
572 EFI_USB2_HC_PROTOCOL_GET_CAPABILITY GetCapability
;
573 EFI_USB2_HC_PROTOCOL_RESET Reset
;
574 EFI_USB2_HC_PROTOCOL_GET_STATE GetState
;
575 EFI_USB2_HC_PROTOCOL_SET_STATE SetState
;
576 EFI_USB2_HC_PROTOCOL_CONTROL_TRANSFER ControlTransfer
;
577 EFI_USB2_HC_PROTOCOL_BULK_TRANSFER BulkTransfer
;
578 EFI_USB2_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER AsyncInterruptTransfer
;
579 EFI_USB2_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER SyncInterruptTransfer
;
580 EFI_USB2_HC_PROTOCOL_ISOCHRONOUS_TRANSFER IsochronousTransfer
;
581 EFI_USB2_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER AsyncIsochronousTransfer
;
582 EFI_USB2_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus
;
583 EFI_USB2_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature
;
584 EFI_USB2_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature
;
585 UINT16 MajorRevision
;
586 UINT16 MinorRevision
;
589 extern EFI_GUID gEfiUsb2HcProtocolGuid
;