OldMdePkg/Include/Protocol/BlockIo.h

   1 /** @file
   2   Block IO protocol as defined in the EFI 1.0 specification.
   3
   4   The Block IO protocol is used to abstract block devices like hard drives,
   5   DVD-ROMs and floppy drives.
   6
   7   Copyright (c) 2006, Intel Corporation
   8   All rights reserved. This program and the accompanying materials
   9   are licensed and made available under the terms and conditions of the BSD License
  10   which accompanies this distribution.  The full text of the license may be found at
  11   http://opensource.org/licenses/bsd-license.php
  12
  13   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  14   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  15
  16   Module Name:  BlockIo.h
  17
  18 **/
  19
  20 #ifndef __BLOCK_IO_H__
  21 #define __BLOCK_IO_H__
  22
  23 #define EFI_BLOCK_IO_PROTOCOL_GUID \
  24   { \
  25     0x964e5b21, 0x6459, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
  26   }
  27
  28 //
  29 // Forward reference for pure ANSI compatability
  30 //
  31 typedef struct _EFI_BLOCK_IO_PROTOCOL  EFI_BLOCK_IO_PROTOCOL;
  32
  33 /**
  34   Reset the Block Device.
  35
  36   @param  This                 Protocol instance pointer.
  37   @param  ExtendedVerification Driver may perform diagnostics on reset.
  38
  39   @retval EFI_SUCCESS          The device was reset.
  40   @retval EFI_DEVICE_ERROR     The device is not functioning properly and could
  41                                not be reset.
  42
  43 **/
  44 typedef
  45 EFI_STATUS
  46 (EFIAPI *EFI_BLOCK_RESET) (
  47   IN EFI_BLOCK_IO_PROTOCOL          *This,
  48   IN BOOLEAN                        ExtendedVerification
  49   )
  50 ;
  51
  52 /**
  53   Read BufferSize bytes from Lba into Buffer.
  54
  55   @param  This       Protocol instance pointer.
  56   @param  MediaId    Id of the media, changes every time the media is replaced.
  57   @param  Lba        The starting Logical Block Address to read from
  58   @param  BufferSize Size of Buffer, must be a multiple of device block size.
  59   @param  Buffer     Buffer containing read data
  60
  61   @retval EFI_SUCCESS           The data was read correctly from the device.
  62   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
  63   @retval EFI_NO_MEDIA          There is no media in the device.
  64   @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.
  65   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  66   @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
  67                                 valid for the device.
  68
  69 **/
  70 typedef
  71 EFI_STATUS
  72 (EFIAPI *EFI_BLOCK_READ) (
  73   IN EFI_BLOCK_IO_PROTOCOL          *This,
  74   IN UINT32                         MediaId,
  75   IN EFI_LBA                        Lba,
  76   IN UINTN                          BufferSize,
  77   OUT VOID                          *Buffer
  78   )
  79 ;
  80
  81 /**
  82   Write BufferSize bytes from Lba into Buffer.
  83
  84   @param  This       Protocol instance pointer.
  85   @param  MediaId    Id of the media, changes every time the media is replaced.
  86   @param  Lba        The starting Logical Block Address to read from
  87   @param  BufferSize Size of Buffer, must be a multiple of device block size.
  88   @param  Buffer     Buffer containing read data
  89
  90   @retval EFI_SUCCESS           The data was written correctly to the device.
  91   @retval EFI_WRITE_PROTECTED   The device can not be written to.
  92   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  93   @retval EFI_NO_MEDIA          There is no media in the device.
  94   @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
  95   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  96   @retval EFI_INVALID_PARAMETER The write request contains a LBA that is not
  97                                 valid for the device.
  98
  99 **/
 100 typedef
 101 EFI_STATUS
 102 (EFIAPI *EFI_BLOCK_WRITE) (
 103   IN EFI_BLOCK_IO_PROTOCOL          *This,
 104   IN UINT32                         MediaId,
 105   IN EFI_LBA                        Lba,
 106   IN UINTN                          BufferSize,
 107   IN VOID                           *Buffer
 108   )
 109 ;
 110
 111 /**
 112   Flush the Block Device.
 113
 114   @param  This              Protocol instance pointer.
 115
 116   @retval EFI_SUCCESS       All outstanding data was written to the device
 117   @retval EFI_DEVICE_ERROR  The device reported an error while writting back the data
 118   @retval EFI_NO_MEDIA      There is no media in the device.
 119
 120 **/
 121 typedef
 122 EFI_STATUS
 123 (EFIAPI *EFI_BLOCK_FLUSH) (
 124   IN EFI_BLOCK_IO_PROTOCOL  *This
 125   )
 126 ;
 127
 128 /**
 129   Block IO read only mode data and updated only via members of BlockIO
 130
 131 **/
 132 typedef struct {
 133   UINT32  MediaId;    ///< The curent media Id. If the media changes, this value is changed.
 134   BOOLEAN RemovableMedia;  ///< TRUE if the media is removable; otherwise, FALSE.
 135   BOOLEAN MediaPresent;    /**< TRUE if there is a media currently present in the device;
 136              othersise, FALSE. THis field shows the media present status
 137              as of the most recent ReadBlocks() or WriteBlocks() call.
 138         **/
 139   BOOLEAN LogicalPartition;  /**< TRUE if LBA 0 is the first block of a partition; otherwise
 140              FALSE. For media with only one partition this would be TRUE.
 141         **/
 142   BOOLEAN ReadOnly;    /**< TRUE if the media is marked read-only otherwise, FALSE.
 143              This field shows the read-only status as of the most recent WriteBlocks () call.
 144         **/
 145   BOOLEAN WriteCaching;    ///< TRUE if the WriteBlock () function caches write data.
 146
 147   UINT32  BlockSize;    /**< The intrinsic block size of the device. If the media changes, then
 148              this field is updated.
 149         **/
 150   UINT32  IoAlign;    ///< Supplies the alignment requirement for any buffer to read or write block(s).
 151
 152   EFI_LBA LastBlock;    /**< The last logical block address on the device.
 153              If the media changes, then this field is updated.
 154         **/
 155 } EFI_BLOCK_IO_MEDIA;
 156
 157 #define EFI_BLOCK_IO_PROTOCOL_REVISION  0x00010000
 158
 159 struct _EFI_BLOCK_IO_PROTOCOL {
 160   UINT64              Revision;
 161
 162   EFI_BLOCK_IO_MEDIA  *Media;
 163
 164   EFI_BLOCK_RESET     Reset;
 165   EFI_BLOCK_READ      ReadBlocks;
 166   EFI_BLOCK_WRITE     WriteBlocks;
 167   EFI_BLOCK_FLUSH     FlushBlocks;
 168
 169 };
 170
 171 extern EFI_GUID gEfiBlockIoProtocolGuid;
 172
 173 #endif