OvmfPkg/OvmfPkgIa32X64.fdf

   1 #/** @file
   2 #  Open Virtual Machine Firmware: FDF
   3 #
   4 #  Copyright (c) 2006 - 2009, Intel Corporation
   5 #
   6 #  All rights reserved. This program and the accompanying materials
   7 #  are licensed and made available under the terms and conditions of the BSD License
   8 #  which accompanies this distribution. The full text of the license may be found at
   9 #  http://opensource.org/licenses/bsd-license.php
  10 #
  11 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14 #**/
  15
  16 ################################################################################
  17 #
  18 # FD Section
  19 # The [FD] Section is made up of the definition statements and a
  20 # description of what goes into  the Flash Device Image.  Each FD section
  21 # defines one flash "device" image.  A flash device image may be one of
  22 # the following: Removable media bootable image (like a boot floppy
  23 # image,) an Option ROM image (that would be "flashed" into an add-in
  24 # card,) a System "Flash"  image (that would be burned into a system's
  25 # flash) or an Update ("Capsule") image that will be used to update and
  26 # existing system flash.
  27 #
  28 ################################################################################
  29 [FD.OVMF]
  30 BaseAddress   = 0xFFE00000     # The base address of the FLASH Device.
  31 Size          = 0x00200000     # The size in bytes of the FLASH Device
  32 ErasePolarity = 1
  33 BlockSize     = 0x10000
  34 NumBlocks     = 0x20
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51 0x0|0x200000
  52 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize
  53 FV = MAINFV
  54
  55 ################################################################################
  56 #
  57 # FV Section
  58 #
  59 # [FV] section is used to define what components or modules are placed within a flash
  60 # device file.  This section also defines order the components and modules are positioned
  61 # within the image.  The [FV] section consists of define statements, set statements and
  62 # module statements.
  63 #
  64 ################################################################################
  65 [FV.DXEFV]
  66 BlockSize          = 0x1000
  67 FvAlignment        = 16         #FV alignment and FV attributes setting.
  68 ERASE_POLARITY     = 1
  69 MEMORY_MAPPED      = TRUE
  70 STICKY_WRITE       = TRUE
  71 LOCK_CAP           = TRUE
  72 LOCK_STATUS        = TRUE
  73 WRITE_DISABLED_CAP = TRUE
  74 WRITE_ENABLED_CAP  = TRUE
  75 WRITE_STATUS       = TRUE
  76 WRITE_LOCK_CAP     = TRUE
  77 WRITE_LOCK_STATUS  = TRUE
  78 READ_DISABLED_CAP  = TRUE
  79 READ_ENABLED_CAP   = TRUE
  80 READ_STATUS        = TRUE
  81 READ_LOCK_CAP      = TRUE
  82 READ_LOCK_STATUS   = TRUE
  83
  84 #
  85 # Files to be placed in DXEFV
  86 #
  87 # This firmware volume will have files placed in it uncompressed,
  88 # and then then entire firmware volume will be compressed in a
  89 # single compression operation in order to achieve better
  90 # overall compression.
  91 #
  92
  93 APRIORI DXE {
  94   INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  95   INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
  96 }
  97
  98 #
  99 # DXE Phase modules
 100 #
 101 INF  MdeModulePkg/Core/Dxe/DxeMain.inf
 102
 103 INF  IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf
 104 INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 105
 106 INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 107 INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 108 INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
 109 INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
 110 INF  PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
 111 INF  UefiCpuPkg/CpuIoDxe/CpuIo.inf
 112 INF  UefiCpuPkg/CpuDxe/CpuDxe.inf
 113 INF  PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
 114 INF  PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
 115 INF  IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
 116 INF  PcAtChipsetPkg/KbcResetDxe/Reset.inf
 117 INF  MdeModulePkg/Universal/Metronome/Metronome.inf
 118 INF  PcAtChipsetPkg/PcRtc/RealTimeClock.inf
 119
 120 INF  MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 121 INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 122 INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 123 INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 124 INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 125 INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 126 INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 127 INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 128 INF  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
 129 INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 130 INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 131 INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 132 INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 133 INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
 134 INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
 135 INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
 136 INF  PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
 137 INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 138 INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 139
 140 INF  OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf
 141
 142 INF  PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
 143 INF  IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
 144 INF  IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
 145 INF  IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
 146 INF  IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf
 147
 148 INF  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
 149 INF  MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
 150 INF  RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf
 151
 152 FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {
 153     SECTION PE32 = FatBinPkg/EnhancedFatDxe/X64/Fat.efi
 154   }
 155
 156 FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {
 157     SECTION PE32 = EdkShellBinPkg/FullShell/X64/Shell_full.efi
 158   }
 159
 160 FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {
 161     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
 162       SECTION RAW = MdeModulePkg/Logo/Logo.bmp
 163     }
 164   }
 165
 166 ################################################################################
 167
 168 [FV.MAINFV]
 169 FvAlignment        = 16
 170 ERASE_POLARITY     = 1
 171 MEMORY_MAPPED      = TRUE
 172 STICKY_WRITE       = TRUE
 173 LOCK_CAP           = TRUE
 174 LOCK_STATUS        = TRUE
 175 WRITE_DISABLED_CAP = TRUE
 176 WRITE_ENABLED_CAP  = TRUE
 177 WRITE_STATUS       = TRUE
 178 WRITE_LOCK_CAP     = TRUE
 179 WRITE_LOCK_STATUS  = TRUE
 180 READ_DISABLED_CAP  = TRUE
 181 READ_ENABLED_CAP   = TRUE
 182 READ_STATUS        = TRUE
 183 READ_LOCK_CAP      = TRUE
 184 READ_LOCK_STATUS   = TRUE
 185
 186 #
 187 # Files to be placed in MAINFV
 188 #
 189 # This firmware volume will have all the files placed in it which
 190 # must not be compressed at the initial boot phase.  The only
 191 # exception to this is the compressed 'DXEFV'.
 192 #
 193
 194 APRIORI PEI {
 195   INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 196 }
 197
 198 #
 199 #  SEC Phase modules
 200 #
 201 INF  OvmfPkg/Sec/SecMain.inf
 202
 203 #
 204 #  PEI Phase modules
 205 #
 206 INF  MdeModulePkg/Core/Pei/PeiMain.inf
 207 INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 208 INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 209 INF  OvmfPkg/PlatformPei/PlatformPei.inf
 210 INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 211
 212 #
 213 # This file contains the compressed 'DXEFV', which is compressed
 214 # in a single compression operation in order to achieve better
 215 # overall compression.
 216 #
 217 FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {
 218    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
 219       SECTION FV_IMAGE = DXEFV
 220    }
 221  }
 222
 223 FILE RAW = 1BA0062E-C779-4582-8566-336AE8F78F09 {
 224     SECTION RAW = OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw
 225   }
 226
 227
 228 ################################################################################
 229 #
 230 # Rules are use with the [FV] section's module INF type to define
 231 # how an FFS file is created for a given INF file. The following Rule are the default
 232 # rules for the different module type. User can add the customized rules to define the
 233 # content of the FFS file.
 234 #
 235 ################################################################################
 236
 237 [Rule.Common.PEI_CORE]
 238   FILE PEI_CORE = $(NAMED_GUID) {
 239     PE32     PE32           |.efi
 240     UI       STRING ="$(MODULE_NAME)" Optional
 241     VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 242   }
 243
 244 [Rule.Common.SEC]
 245   FILE SEC = $(NAMED_GUID) {
 246     PE32     PE32           |.efi
 247     UI       STRING ="$(MODULE_NAME)" Optional
 248     VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 249   }
 250
 251 [Rule.Common.PEIM]
 252   FILE PEIM = $(NAMED_GUID) {
 253      PEI_DEPEX PEI_DEPEX Optional        |.depex
 254      PE32      PE32                      |.efi
 255      UI       STRING="$(MODULE_NAME)" Optional
 256      VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 257   }
 258
 259 [Rule.Common.PEIM.TIANOCOMPRESSED]
 260   FILE PEIM = $(NAMED_GUID) {
 261     PEI_DEPEX PEI_DEPEX Optional         |.depex
 262     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 263       PE32      PE32                     |.efi
 264       UI        STRING="$(MODULE_NAME)" Optional
 265       VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 266     }
 267   }
 268
 269 [Rule.Common.DXE_CORE]
 270   FILE DXE_CORE = $(NAMED_GUID) {
 271     PE32     PE32           |.efi
 272     UI       STRING="$(MODULE_NAME)" Optional
 273     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 274   }
 275
 276 [Rule.Common.UEFI_DRIVER]
 277   FILE DRIVER = $(NAMED_GUID) {
 278     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 279     PE32     PE32                    |.efi
 280     UI       STRING="$(MODULE_NAME)" Optional
 281     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 282   }
 283
 284 [Rule.Common.DXE_DRIVER]
 285   FILE DRIVER = $(NAMED_GUID) {
 286     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 287     PE32     PE32                    |.efi
 288     UI       STRING="$(MODULE_NAME)" Optional
 289     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 290   }
 291
 292 [Rule.Common.DXE_RUNTIME_DRIVER]
 293   FILE DRIVER = $(NAMED_GUID) {
 294     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 295     PE32     PE32                    |.efi
 296     UI       STRING="$(MODULE_NAME)" Optional
 297     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 298   }
 299
 300 [Rule.Common.UEFI_APPLICATION]
 301   FILE APPLICATION = $(NAMED_GUID) {
 302     PE32     PE32                    |.efi
 303     UI       STRING="$(MODULE_NAME)" Optional
 304     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 305   }
 306
 307 [Rule.Common.DXE_DRIVER.ACPITABLE]
 308   FILE FREEFORM = $(NAMED_GUID) {
 309     RAW ACPI               |.acpi
 310     RAW ASL                |.aml
 311   }
 312
 313 [Rule.Common.SEC.RESET_VECTOR]
 314   FILE RAW = $(NAMED_GUID) {
 315     RAW RAW                |.raw
 316   }
 317