ShellPkg/DynamicCommand/DpDynamicCommand/Dp.uni

   1 // *++
   2 //
   3 // (C) Copyright 2014-2015 Hewlett-Packard Development Company, L.P.<BR>
   4 // Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
   5 // (C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>
   6 // This program and the accompanying materials
   7 // are licensed and made available under the terms and conditions of the BSD License
   8 // which accompanies this distribution.  The full text of the license may be found at
   9 // http://opensource.org/licenses/bsd-license.php
  10 //
  11 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 //
  14 //
  15 // Module Name:
  16 //
  17 //   DpStrings.uni
  18 //
  19 // Abstract:
  20 //
  21 //   String definitions for the Shell dp command
  22 //
  23 // Revision History:
  24 //
  25 // --*/
  26
  27 /=#
  28
  29 #langdef   en-US "English"
  30
  31 #string STR_DP_UP                      #language en-US  "UP"
  32 #string STR_DP_DOWN                    #language en-US  "DOWN"
  33 #string STR_DP_DASHES                  #language en-US  "-------------------------------------------------------------------------------\n"
  34 #string STR_DP_SECTION_HEADER          #language en-US  "\n==[ %s ]========\n"
  35 #string STR_DP_INVALID_ARG             #language en-US  "Invalid argument(s)\n"
  36 #string STR_DP_HANDLES_ERROR           #language en-US  "Locate all handles error - %r\n"
  37 #string STR_DP_ERROR_NAME              #language en-US  "Unknown driver name"
  38 #string STR_PERF_PROPERTY_NOT_FOUND    #language en-US  "Performance property not found\n"
  39 #string STR_DP_BUILD_REVISION          #language en-US  "\nDP Build Version:       %d.%d\n"
  40 #string STR_DP_KHZ                     #language en-US  "System Performance Timer Frequency:   %,8d (KHz)\n"
  41 #string STR_DP_TIMER_PROPERTIES        #language en-US  "System Performance Timer counts %s from 0x%Lx to 0x%Lx\n"
  42 #string STR_DP_VERBOSE_THRESHOLD       #language en-US  "Measurements less than %,Ld microseconds are not displayed.\n"
  43 #string STR_DP_SECTION_PHASES          #language en-US  "Major Phases"
  44 #string STR_DP_SEC_PHASE               #language en-US  "  SEC Phase Duration:      %L8d (us)\n"
  45 #string STR_DP_PHASE_BDSTO             #language en-US  "         BDS Timeout:   %L8d (ms) included in BDS Duration\n"
  46 #string STR_DP_PHASE_DURATION          #language en-US  "%5a Phase Duration:   %L8d (ms)\n"
  47 #string STR_DP_TOTAL_DURATION          #language en-US  "Total       Duration:   %L8d (ms)\n"
  48 #string STR_DP_SECTION_DRIVERS         #language en-US  "Drivers by Handle"
  49 #string STR_DP_HANDLE_SECTION          #language en-US  "Index:  Handle                Driver Name               Description    Time(us)\n"
  50 #string STR_DP_HANDLE_VARS             #language en-US  "%5d:  [%3x]   %36s    %11s    %L8d\n"
  51 #string STR_DP_HANDLE_SECTION2         #language en-US  "Index: Handle               Driver Name             Description  Time(us)    ID\n"
  52 #string STR_DP_HANDLE_VARS2            #language en-US  "%5d: [%3x]  %36s  %11s  %L8d %5d\n"
  53 #string STR_DP_SECTION_PEIMS           #language en-US  "PEIMs"
  54 #string STR_DP_PEIM_SECTION            #language en-US  "Index:                Instance GUID              Token    Time(us)\n"
  55 #string STR_DP_PEIM_VARS               #language en-US  "%5d:    %g   PEIM    %L8d\n"
  56 #string STR_DP_PEIM_SECTION2           #language en-US  "Index:               Instance GUID            Token  Time(us)    ID\n"
  57 #string STR_DP_PEIM_VARS2              #language en-US  "%5d:   %g PEIM  %L8d %5d\n"
  58 #string STR_DP_SECTION_GENERAL         #language en-US  "General"
  59 #string STR_DP_GLOBAL_SECTION          #language en-US  "Index                      Name                         Description    Time(us)\n"
  60 #string STR_DP_GLOBAL_VARS             #language en-US  "%5d:%25s     %31s    %L8d\n"
  61 #string STR_DP_GLOBAL_SECTION2         #language en-US  "Index                      Name                     Description  Time(us)    ID\n"
  62 #string STR_DP_GLOBAL_VARS2            #language en-US  "%5d:%25s %31s  %L8d %5d\n"
  63 #string STR_DP_SECTION_CUMULATIVE      #language en-US  "Cumulative"
  64 #string STR_DP_CUMULATIVE_SECT_1       #language en-US  "(Times in microsec.)     Cumulative   Average     Shortest    Longest\n"
  65 #string STR_DP_CUMULATIVE_SECT_2       #language en-US  "   Name         Count     Duration    Duration    Duration    Duration\n"
  66 #string STR_DP_CUMULATIVE_STATS        #language en-US  "%11a   %8d  %L10d  %L10d  %L10d  %L10d\n"
  67 #string STR_DP_SECTION_STATISTICS      #language en-US  "Statistics"
  68 #string STR_DP_STATS_NUMTRACE          #language en-US  "There were %d measurements taken, of which:\n"
  69 #string STR_DP_STATS_NUMINCOMPLETE     #language en-US  "%,8d are incomplete.\n"
  70 #string STR_DP_STATS_NUMPHASES         #language en-US  "%,8d are major execution phases.\n"
  71 #string STR_DP_STATS_NUMHANDLES        #language en-US  "%,8d have non-NULL handles, %d are NULL.\n"
  72 #string STR_DP_STATS_NUMPEIMS          #language en-US  "%,8d are PEIMs.\n"
  73 #string STR_DP_STATS_NUMGLOBALS        #language en-US  "%,8d are general measurements.\n"
  74 #string STR_DP_STATS_NUMPROFILE        #language en-US  "%,8d are profiling records.\n"
  75 #string STR_DP_SECTION_ALL             #language en-US  "Sequential Trace Records"
  76 #string STR_DP_ALL_HEADR               #language en-US  "\nIndex      Handle                 Module                      Token    Time(us)\n"
  77 #string STR_DP_ALL_VARS                #language en-US  "%5d:%3s0x%08p %36s %13s %L8d\n"
  78 #string STR_DP_ALL_DASHES2             #language en-US  "-------------------------------------------------------------------------------------\n"
  79 #string STR_DP_ALL_HEADR2              #language en-US  "\nIndex      Handle                 Module                      Token    Time(us)    ID\n"
  80 #string STR_DP_ALL_VARS2               #language en-US  "%5d:%3s0x%08p %36s %13s %L8d %5d\n"
  81 #string STR_DP_SECTION_RAWTRACE        #language en-US  "RAW Trace"
  82 #string STR_DP_RAW_DASHES              #language en-US  "---------------------------------------------------------------------------------------------------------------------------\n"
  83 #string STR_DP_RAW_VARS                #language en-US  "%5d: %16LX %16LX %16LX  %31a  %31a\n"
  84 #string STR_DP_RAW_HEADR               #language en-US  "\nIndex       Handle        Start Count       End Count                  Token                          Module\n"
  85 #string STR_DP_RAW_DASHES2             #language en-US  "---------------------------------------------------------------------------------------------------------------------------------\n"
  86 #string STR_DP_RAW_VARS2               #language en-US  "%5d: %16LX %16LX %16LX  %31a  %31a %5d\n"
  87 #string STR_DP_RAW_HEADR2              #language en-US  "\nIndex       Handle        Start Count       End Count                  Token                          Module                   ID\n"
  88 #string STR_DP_INCOMPLETE              #language en-US  " I "
  89 #string STR_DP_COMPLETE                #language en-US  "   "
  90 #string STR_ALIT_UNKNOWN               #language en-US  "Unknown"
  91 #string STR_DP_GET_ACPI_TABLE_FAIL     #language en-US  "Fail to get ACPI Table\n"
  92 #string STR_DP_GET_ACPI_FPDT_FAIL      #language en-US  "Fail to get Firmware Performance Data Table (FPDT) in ACPI Table\n"
  93
  94 #string STR_GET_HELP_DP         #language en-US ""
  95 ".TH dp 0 "Display performance metrics"\r\n"
  96 ".SH NAME\r\n"
  97 "Displays performance metrics that are stored in memory.\r\n"
  98 ".SH SYNOPSIS\r\n"
  99 "DP [-b] [-v] [-x] [-s | -A | -R] [-t value] [-n count] [-c [token]][-i] [-?]\r\n"
 100 ".SH OPTIONS\r\n"
 101 " \r\n"
 102 "  -b       - Displays on multiple pages\r\n"
 103 "  -v       - Displays additional information\r\n"
 104 "  -x       - Prevents display of individual measurements for cumulative items\r\n"
 105 "  -s       - Displays summary information only\r\n"
 106 "  -A       - Displays all measurements in a list\r\n"
 107 "  -R       - Displays all measurements in raw format\r\n"
 108 "  -t VALUE - Sets display threshold to VALUE microseconds\r\n"
 109 "  -n COUNT - Limits display to COUNT lines in All and Raw modes\r\n"
 110 "  -i       - Displays identifier\r\n"
 111 "  -c TOKEN - Display pre-defined and custom cumulative data\r\n"
 112 "             Pre-defined cumulative token are:\r\n"
 113 "             1. LoadImage:\r\n"
 114 "             2. StartImage:\r\n"
 115 "             3. DB:Start:\r\n"
 116 "             4. DB:Support:\r\n"
 117 "  -?       - Displays DP help information\r\n"
 118 ".SH DESCRIPTION\r\n"
 119 " \r\n"
 120 "NOTES:\r\n"
 121 "  1. Displays Performance metrics that are stored in memory.\r\n"
 122 ".SH RETURNVALUES\r\n"
 123 " \r\n"
 124 "RETURN VALUES:\r\n"
 125 "  SHELL_SUCCESS            The action was completed as requested.\r\n"
 126 "  SHELL_NOT_FOUND          The requested option was not found.\r\n"
 127 "  SHELL_INVALID_PARAMETER  One of the passed in parameters was incorrectly formatted or its value was out of bounds.\r\n"
 128 "  SHELL_UNSUPPORTED        The action as requested was unsupported.\r\n"
 129 "  SHELL_OUT_OF_RESOURCES   There was insufficient free space for the request to be completed.\r\n"