ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.uni

   1 // /**
   2 //
   3 // (C) Copyright 2015-2016 Hewlett Packard Enterprise Development LP<BR>
   4 // Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved. <BR>
   5 // This program and the accompanying materials
   6 // are licensed and made available under the terms and conditions of the BSD License
   7 // which accompanies this distribution. The full text of the license may be found at
   8 // http://opensource.org/licenses/bsd-license.php
   9 //
  10 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 //
  13 // Module Name:
  14 //
  15 // Tftp.uni
  16 //
  17 // Abstract:
  18 //
  19 // String definitions for UEFI Shell TFTP command
  20 //
  21 //
  22 // **/
  23
  24 /=#
  25
  26 #langdef   en-US "english"
  27
  28 #string STR_GEN_TOO_MANY           #language en-US "%H%s%N: Too many arguments\r\n"
  29 #string STR_GEN_TOO_FEW            #language en-US "%H%s%N: Too few arguments\r\n"
  30 #string STR_GEN_PARAM_INV          #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n"
  31 #string STR_GEN_PROBLEM            #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n"
  32 #string STR_GEN_FILE_OPEN_FAIL     #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n"
  33 #string STR_GEN_CRLF               #language en-US "\r\n"
  34
  35 #string STR_TFTP_ERR_NO_NIC        #language en-US "No network interface card found.\r\n"
  36 #string STR_TFTP_ERR_NIC_NAME      #language en-US "Failed to get the name of the network interface card number %d - %r\r\n"
  37 #string STR_TFTP_ERR_OPEN_PROTOCOL #language en-US "Unable to open MTFTP4 protocol on '%H%s%N' - %r\r\n"
  38 #string STR_TFTP_ERR_CONFIGURE     #language en-US "Unable to configure MTFTP4 protocol on '%H%s%N' - %r\r\n"
  39 #string STR_TFTP_ERR_FILE_SIZE     #language en-US "Unable to get the size of the file '%H%s%N' on '%H%s%N' - %r\r\n"
  40 #string STR_TFTP_ERR_DOWNLOAD      #language en-US "Unable to download the file '%H%s%N' on '%H%s%N' - %r\r\n"
  41 #string STR_TFTP_ERR_WRITE         #language en-US "Unable to write into file '%H%s%N' - %r\r\n"
  42 #string STR_TFTP_ERR_NIC_NOT_FOUND #language en-US "Network Interface Card '%H%s%N' not found.\r\n"
  43 #string STR_TFTP_DOWNLOADING       #language en-US "Downloading the file '%H%s%N'\r\n"
  44 #string STR_TFTP_STRING            #language en-US "%s"
  45
  46 #string STR_GET_HELP_TFTP          #language en-US ""
  47 ".TH tftp 0 "Download a file from TFTP server."\r\n"
  48 ".SH NAME\r\n"
  49 "Download a file from TFTP server.\r\n"
  50 ".SH SYNOPSIS\r\n"
  51 " \r\n"
  52 "TFTP [-i interface] [-l <port>] [-r <port>] [-c <retry count>] [-t <timeout>]\r\n"
  53 "     [-s <block size>] host remotefilepath [localfilepath]\r\n"
  54 ".SH OPTIONS\r\n"
  55 " \r\n"
  56 "  -i interface     - Specifies an adapter name, i.e., eth0.\r\n"
  57 "  -l port          - Specifies the local port number. Default value is 0\r\n"
  58 "                     and the port number is automatically assigned.\r\n"
  59 "  -r port          - Specifies the remote port number. Default value is 69.\r\n"
  60 "  -c <retry count> - The number of times to transmit request packets and\r\n"
  61 "                     wait for a response. The default value is 6.\r\n"
  62 "  -t <timeout>     - The number of seconds to wait for a response after\r\n"
  63 "                     sending a request packet. Default value is 4s.\r\n"
  64 "  -s <block size>  - Specifies the TFTP blksize option as defined in RFC 2348.\r\n"
  65 "                     Valid range is between 8 and 65464, default value is 512.\r\n"
  66 "  host             - Specify TFTP Server IPv4 address.\r\n"
  67 "  remotefilepath   - TFTP server file path to download the file.\r\n"
  68 "  localfilepath    - Local destination file path.\r\n"
  69 ".SH DESCRIPTION\r\n"
  70 " \r\n"
  71 "NOTES:\r\n"
  72 "  1. The TFTP command allows to get the file specified by its 'remotefilepath'\r\n"
  73 "     path from the TFTP server specified by its 'host' IPv4 address. If the\r\n"
  74 "     optional 'localfilepath' parameter is provided, the downloaded file is\r\n"
  75 "     stored locally using the provided file path. If the local file path is\r\n"
  76 "     not specified, the file is stored in the current directory using the file\r\n"
  77 "     server's name.\r\n"
  78 "  2. Before using the TFTP command, the network interface intended to be\r\n"
  79 "     used to retrieve the file must be configured. This configuration may be\r\n"
  80 "     done by means of the 'ifconfig' command.\r\n"
  81 "  3. If a network interface is defined with the '-i' option then only this\r\n"
  82 "     interface will be used to retrieve the remote file. Otherwise, all network\r\n"
  83 "     interfaces are tried in the order they have been discovered during the\r\n"
  84 "     DXE phase.\r\n"
  85 ".SH EXAMPLES\r\n"
  86 " \r\n"
  87 "EXAMPLES:\r\n"
  88 "  * To get the file "dir1/file1.dat" from the TFTP server 192.168.1.1 and\r\n"
  89 "    store it as file2.dat in the current directory :\r\n"
  90 "    fs0:\> tftp 192.168.1.1 dir1/file1.dat file2.dat\r\n"
  91 ".SH RETURNVALUES\r\n"
  92 " \r\n"
  93 "RETURN VALUES:\r\n"
  94 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
  95 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
  96 "                            formatted or its value was out of bounds.\r\n"
  97