ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.uni

   1 // /**
   2 //
   3 // Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
   4 // (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P.<BR>
   5 // (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
   6 // This program and the accompanying materials
   7 // are licensed and made available under the terms and conditions of the BSD License
   8 // which accompanies this distribution. The full text of the license may be found at
   9 // http://opensource.org/licenses/bsd-license.php
  10 //
  11 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 //
  14 // Module Name:
  15 //
  16 // UefiShellDebug1CommandsLib.uni
  17 //
  18 // Abstract:
  19 //
  20 // String definitions for UEFI Shell 2.0 Debug1 profile commands
  21 //
  22 //
  23 // **/
  24
  25 /=#
  26
  27 #langdef   en-US "english"
  28
  29 #string STR_GEN_NO_MEM            #language en-US "%H%s%N: Memory is not available.\r\n"
  30 #string STR_GEN_BOOT_ONLY         #language en-US "%H%s%N: Boot must be selected for hot key options.\r\n"
  31 #string STR_GEN_FIND_FAIL         #language en-US "%H%s%N: File not found - '%H%s%N'\r\n"
  32
  33 #string STR_GEN_PROBLEM           #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n"
  34 #string STR_GEN_PROBLEM_VAL       #language en-US "%H%s%N: Bad value - '%H%s%N' for flag - '%H%s%N'\r\n"
  35 #string STR_GEN_NO_VALUE          #language en-US "%H%s%N: Missing argument for flag - '%H%s%N'\r\n"
  36 #string STR_GEN_TOO_FEW           #language en-US "%H%s%N: Too few arguments.\r\n"
  37 #string STR_GEN_TOO_MANY          #language en-US "%H%s%N: Too many arguments.\r\n"
  38 #string STR_GEN_NO_DRIVER_BOOT    #language en-US "%H%s%N: Driver or Boot must be selected.\r\n"
  39 #string STR_GEN_PCIRBIO_NF        #language en-US "%H%s%N: Protocol - PciRootBridgeIo not found.\r\n"
  40 #string STR_GEN_PCIRBIO_ER        #language en-US "%H%s%N: Problem accessing the data using Protocol - PciRootBridgeIo\r\n"
  41 #string STR_GEN_PARAM_INV         #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n"
  42 #string STR_GEN_PARAM_INV_HEX     #language en-US "%H%s%N: Invalid parameter - '%H%s%N:'.  Must be hexadecimal.\r\n"
  43 #string STR_GEN_PARAM_CONFLICT    #language en-US "%H%s%N: Flags conflict with - '%H%s%N' and '%H%s%N'\r\n"
  44 #string STR_GEN_OUT_MEM           #language en-US "%H%s%N: Memory allocation was not successful.\r\n"
  45 #string STR_GEN_MAP_PROTOCOL      #language en-US "%H%s%N: Mapped device '%B%s%N' does not have protocol %B%s%N\r\n"
  46 #string STR_GEN_FILE_OPEN_FAIL    #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n"
  47 #string STR_GEN_FILE_DELETE_FAIL  #language en-US "%H%s%N: Cannot delete file - '%H%s%N'\r\n"
  48 #string STR_GEN_NO_CWD            #language en-US "%H%s%N: Current directory not specified.\r\n"
  49 #string STR_GEN_FILE_IS_DIRECTORY #language en-US "%H%s%N: The file '%H%s%N' is a directory.\r\n"
  50 #string STR_GEN_SFO_HEADER        #language en-US "ShellCommand,"%s"\r\n"
  51
  52
  53 #string STR_FILE_OPEN_FAIL        #language en-US "Unable to open file on '%B%s%N' with: %r.\r\n"
  54 #string STR_FILE_FIND_FAIL        #language en-US "%H%s%N: File not found - '%H%s%N'\r\n"
  55 #string STR_FILE_NOT_DIR          #language en-US "%H%s%N: Directories are not permitted - '%H%s%N'\r\n"
  56 #string STR_SIZE_NOT_SPEC         #language en-US "%H%s%N: A valid size must be specified\r\n"
  57 #string STR_FILE_NOT_SPEC         #language en-US "%H%s%N: File not specified\r\n"
  58 #string STR_FILE_WRITE_FAIL       #language en-US "%H%s%N: Write file error - '%H%s%N'\r\n"
  59 #string STR_FILE_READ_FAIL        #language en-US "%H%s%N: Read file error - '%H%s%N'\r\n"
  60 #string STR_VOLUME_FULL           #language en-US "%H%s%N: The volume is full\r\n"
  61
  62 #string STR_SET_SIZE_FAIL         #language en-US "%H%s%N: Unable to change size on '%B%s%N'\r\n"
  63 #string STR_SET_SIZE_DONE         #language en-US "Size changed on '%B%s%N'.\r\n"
  64
  65 #string STR_DBLK_HEADER           #language en-US "LBA %016LX Size %08x bytes BlkIo %0x\r\n"
  66
  67 #string STR_COMP_HEADER           #language en-US "Compare %s to %s.\r\n"
  68 #string STR_COMP_SIZE_FAIL        #language en-US "Difference # 1: File size mismatch.\r\n"
  69 #string STR_COMP_SPOT_FAIL1       #language en-US ""
  70                                                   "Difference #% 2d:\r\n"
  71                                                   "File1: %s\r\n"
  72                                                   "  %08x: %02x                               *%c*\r\n"
  73                                                   "File2: %s\r\n"
  74                                                   "  %08x: %02x                               *%c*\r\n"
  75 #string STR_COMP_SPOT_FAIL2       #language en-US ""
  76                                                   "Difference #% 2d:\r\n"
  77                                                   "File1: %s\r\n"
  78                                                   "  %08x: %02x %02x                            *%c%c*\r\n"
  79                                                   "File2: %s\r\n"
  80                                                   "  %08x: %02x %02x                            *%c%c*\r\n"
  81 #string STR_COMP_SPOT_FAIL3       #language en-US ""
  82                                                   "Difference #% 2d:\r\n"
  83                                                   "File1: %s\r\n"
  84                                                   "  %08x: %02x %02x %02x                         *%c%c%c*\r\n"
  85                                                   "File2: %s\r\n"
  86                                                   "  %08x: %02x %02x %02x                         *%c%c%c*\r\n"
  87 #string STR_COMP_SPOT_FAIL4       #language en-US ""
  88                                                   "Difference #% 2d:\r\n"
  89                                                   "File1: %s\r\n"
  90                                                   "  %08x: %02x %02x %02x %02x                      *%c%c%c%c*\r\n"
  91                                                   "File2: %s\r\n"
  92                                                   "  %08x: %02x %02x %02x %02x                      *%c%c%c%c*\r\n"
  93
  94 #string STR_COMP_FOOTER_FAIL      #language en-US "[difference(s) encountered] \r\n"
  95 #string STR_COMP_FOOTER_PASS      #language en-US "[no differences encountered]\r\n"
  96
  97 #string STR_MODE_SET_FAIL         #language en-US "%H%s%N: Unable to change the mode.\r\n"
  98 #string STR_MODE_NO_MATCH         #language en-US "%H%s%N: No matching mode found to set\r\n"
  99 #string STR_MODE_LIST_HEAD        #language en-US "Available modes for console output device.\r\n"
 100 #string STR_MODE_LIST_ITEM        #language en-US "  Col % 5d Row % 5d  %c\r\n"
 101
 102 #string STR_MEMMAP_GET_FAILED     #language en-US "%H%s%N: Unable to get memory map\r\n"
 103 #string STR_MEMMAP_LIST_HEAD      #language en-US "Type       Start            End              # Pages          Attributes\r\n"
 104 #string STR_MEMMAP_LIST_ITEM      #language en-US "% -10s %016LX-%016LX %016LX %016LX\r\n"
 105 #string STR_MEMMAP_LIST_SUMM      #language en-US " \r\n"
 106                                                   "  Reserved  : %,14ld Pages (%,ld Bytes)\r\n"
 107                                                   "  LoaderCode: %,14ld Pages (%,ld Bytes)\r\n"
 108                                                   "  LoaderData: %,14ld Pages (%,ld Bytes)\r\n"
 109                                                   "  BS_Code   : %,14ld Pages (%,ld Bytes)\r\n"
 110                                                   "  BS_Data   : %,14ld Pages (%,ld Bytes)\r\n"
 111                                                   "  RT_Code   : %,14ld Pages (%,ld Bytes)\r\n"
 112                                                   "  RT_Data   : %,14ld Pages (%,ld Bytes)\r\n"
 113                                                   "  ACPI_Recl : %,14ld Pages (%,ld Bytes)\r\n"
 114                                                   "  ACPI_NVS  : %,14ld Pages (%,ld Bytes)\r\n"
 115                                                   "  MMIO      : %,14ld Pages (%,ld Bytes)\r\n"
 116                                                   "  MMIO_Port : %,14ld Pages (%,ld Bytes)\r\n"
 117                                                   "  PalCode   : %,14ld Pages (%,ld Bytes)\r\n"
 118                                                   "  Available : %,14ld Pages (%,ld Bytes)\r\n"
 119                                                   "  Persistent: %,14ld Pages (%,ld Bytes)\r\n"
 120                                                   "              -------------- \r\n"
 121                                                   "Total Memory: %,14ld MB (%,ld Bytes)\r\n"
 122 #string STR_MEMMAP_LIST_ITEM_SFO  #language en-US "MemoryMap,"%s","%LX","%LX","%LX","%LX"\r\n"
 123 #string STR_MEMMAP_LIST_SUMM_SFO  #language en-US "MemoryMapSummary,"%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld"\r\n"
 124
 125 #string STR_EFI_COMPRESS_FAIL     #language en-US "Unable to compress: %r.\r\n"
 126 #string STR_EFI_DECOMPRESS_FAIL   #language en-US "Unable to decompress: %r.\r\n"
 127 #string STR_EFI_DECOMPRESS_NOPE   #language en-US "The file does not appear to be a compressed file.  Cannot continue. \"%H%s%N\"\r\n"
 128
 129 #string STR_DMEM_HEADER_ROW       #language en-US "Memory Address %016LX %X Bytes\r\n"
 130 #string STR_DMEM_MMIO_HEADER_ROW  #language en-US "Memory Mapped IO Address %016LX %X Bytes\r\n"
 131 #string STR_DMEM_DATA_ROW         #language en-US "%08X: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x *%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c*\r\n"
 132 #string STR_DMEM_SYSTEM_TABLE     #language en-US "\r\nValid EFI Header at Address %016Lx\r\n"
 133                                                   "---------------------------------------------\r\n"
 134                                                   "System: Table Structure size %08x revision %08x\r\n"
 135                                                   "ConIn (%016LX) ConOut (%016LX) StdErr (%016LX)\r\n"
 136                                                   "Runtime Services %016LX\r\n"
 137                                                   "Boot Services    %016LX\r\n"
 138                                                   "SAL System Table %016LX\r\n"
 139                                                   "ACPI Table       %016LX\r\n"
 140                                                   "ACPI 2.0 Table   %016LX\r\n"
 141                                                   "MPS Table        %016LX\r\n"
 142                                                   "SMBIOS Table     %016LX\r\n"
 143
 144 #string STR_LOAD_PCI_ROM_RES      #language en-US "Image '%B%s%N' load result: %r\r\n"
 145 #string STR_LOADPCIROM_CORRUPT    #language en-US "%H%s%N: File '%B%s%N' Image %d is corrupt.\r\n"
 146 #string STR_LOADPCIROM_LOAD_FAIL  #language en-US "%H%s%N: File '%B%s%N' Image %d unable to load.\r\n"
 147 #string STR_LOADPCIROM_START_FAIL #language en-US "%H%s%N: File '%B%s%N' Image %d unable to start.\r\n"
 148
 149 #string STR_MM_NOT_ALIGNED        #language en-US "%H%s%N: Address parameter %016LX is not aligned.\r\n"
 150 #string STR_MM_PCIE_ADDRESS_RANGE #language en-US "%H%s%N: Address parameter %016LX is not a valid PCI/PCIE address.\r\n"
 151 #string STR_MM_IO_ADDRESS_RANGE   #language en-US "%H%s%N: IO address out of range 0 - 0xFFFF\r\n"
 152 #string STR_MM_MMIO               #language en-US "%HMMIO%N"
 153 #string STR_MM_IO                 #language en-US "%HIO%N"
 154 #string STR_MM_PCI                #language en-US "%HPCI%N"
 155 #string STR_MM_MEM                #language en-US "%HMEM%N"
 156 #string STR_MM_PCIE               #language en-US "%HPCIE%N"
 157 #string STR_MM_ADDRESS            #language en-US "  0x%016lx : "
 158 #string STR_MM_BUF                #language en-US "0x%0*lx"
 159 #string STR_MM_ADDRESS_RANGE2     #language en-US "%H%s%N: IO address out of range\r\n"
 160 #string STR_MM_ERROR              #language en-US "%H%s%N: Input had incorrect format\r\n"
 161
 162 #string STR_SETVAR_PRINT          #language en-US "%g - %s - %04x Bytes\r\n"
 163 #string STR_SETVAR_ERROR_SET      #language en-US "%H%s%N: Unable to set - %H%g%N - %H%s%N\r\n"
 164 #string STR_SETVAR_ERROR_GET      #language en-US "%H%s%N: Unable to get - %H%g%N - %H%s%N\r\n"
 165 #string STR_SETVAR_ERROR_DPFT     #language en-US "%H%s%N: DevicePathFromText conversion was not successful.\r\n"
 166
 167 #string STR_SERMODE_NO_FOUND      #language en-US "%H%s%N: No serial ports found.\r\n"
 168 #string STR_SERMODE_NOT_FOUND     #language en-US "%H%s%N: No serial port or specified serial port found.\r\n"
 169 #string STR_SERMODE_BAD_HANDLE    #language en-US "%H%s%N: Handle %H%02x%N is not a serial device handle.\r\n"
 170 #string STR_SERMODE_SET_HANDLE    #language en-US "Mode set on handle %H%02x%N successfully.\r\n"
 171 #string STR_SERMODE_SET_FAIL      #language en-US "%H%s%N: Mode change on handle %H%02x%N was not successful.\r\n"
 172 #string STR_SERMODE_DISPLAY       #language en-US "%x(%08x) - (%ld, %c, %d, %s)\r\n"
 173 #string STR_SERMODE_SET_UNSUPPORTED #language en-US "%H%s%N: One or more of the new settings is not supported on handle %H%02x%N.\r\n"
 174 #string STR_SERMODE_SET_DEV_ERROR  #language en-US "%H%s%N: The serial device on handle %H%02x%N is not functioning correctly.\r\n"
 175
 176 #string STR_PCI_HANDLE_CFG_ERR    #language en-US "%H%s%N: Handle protocol or configuration error.\r\n"
 177 #string STR_PCI_BUS_RANGE_ERR     #language en-US "%H%s%N: Get next bus range error.\r\n"
 178 #string STR_PCI_NO_FIND           #language en-US "%H%s%N: Cannot find protocol interface for segment %x, bus %x.\r\n"
 179 #string STR_PCI_NO_CFG            #language en-US "%H%s%N: Cannot read configuration data.\r\n"
 180 #string STR_PCI_INFO              #language en-US "%H  PCI Segment %02x Bus %02x Device %02x Func %02x%N [EFI %02x%02x%02x%02x00]\r\n"
 181 #string STR_PCI_TITLE             #language en-US "   Seg  Bus  Dev  Func\r\n"
 182                                                   "   ---  ---  ---  ----\r\n"
 183 #string STR_PCI_LINE_P1           #language en-US "    %E%02x   %02x   %02x    %02x ==> %N"
 184 #string STR_PCI_LINE_P2           #language en-US "\r\n             Vendor %04x Device %04x Prog Interface %x\r\n"
 185 #string STR_PCIEX_CAPABILITY_CAPID     #language en-US "CapID(%2x):          %E%02x%N"
 186 #string STR_PCIEX_NEXTCAP_PTR          #language en-US "            NextCap Ptr(%2x):    %E%02x%N\r\n"
 187 #string STR_PCIEX_CAP_REGISTER         #language en-US "Cap Register(%2x):             %E%04x%N\r\n"
 188 #string STR_PCIEX_DEVICE_CAP           #language en-US "Device Capabilities(%2x):      %E%08x%N\r\n"
 189 #string STR_PCIEX_DEVICE_CONTROL       #language en-US "Device Control(%2x):           %E%04x%N\r\n"
 190 #string STR_PCIEX_DEVICE_STATUS        #language en-US "Device Status(%2x):            %E%04x%N\r\n"
 191 #string STR_PCIEX_LINK_CAPABILITIES    #language en-US "Link Capabilities(%2x):        %E%08x%N\r\n"
 192 #string STR_PCIEX_LINK_CONTROL         #language en-US "Link Control(%2x):             %E%04x%N\r\n"
 193 #string STR_PCIEX_LINK_STATUS          #language en-US "Link Status(%2x):              %E%04x%N\r\n"
 194 #string STR_PCIEX_SLOT_CAPABILITIES    #language en-US "Slot Capabilities(%2x):        %E%08x%N\r\n"
 195 #string STR_PCIEX_SLOT_CONTROL         #language en-US "Slot Control(%2x):             %E%04x%N\r\n"
 196 #string STR_PCIEX_SLOT_STATUS          #language en-US "Slot Status(%2x):              %E%04x%N\r\n"
 197 #string STR_PCIEX_ROOT_CONTROL         #language en-US "Root Control(%2x):             %E%04x%N\r\n"
 198 #string STR_PCIEX_RSVDP                #language en-US "Root Capabilities(%2x):        %E%04x%N\r\n"
 199 #string STR_PCIEX_ROOT_STATUS          #language en-US "Root Status(%2x):              %E%08x%N\r\n"
 200 #string STR_PCI_LINE_VID_DID      #language en-US "Vendor ID(%x): %E%04x%N     Device ID(%x): %E%04x%N\r\n"
 201 #string STR_PCI_LINE_RID          #language en-US "Revision ID(%x): %E%02x%N "
 202 #string STR_PCI_LINE_BIST         #language en-US "BIST(%02x): "
 203 #string STR_PCI_LINE_CAP          #language en-US "Capable,Return: %E%02x%N\r\n"
 204 #string STR_PCI_LINE_CAP_NO       #language en-US " Incapable\r\n"
 205 #string STR_PCI2_CACHE_LINE_SIZE       #language en-US "Cache Line Size(%x): %E%02x%N                 "
 206 #string STR_PCI2_LATENCY_TIMER         #language en-US "Latency Timer(%x): %E%02x%N\r\n"
 207 #string STR_PCI2_HEADER_TYPE           #language en-US "Header Type(%02x):    %E%02x%N, "
 208 #string STR_PCI2_MULTI_FUNCTION        #language en-US "Multi-function, "
 209 #string STR_PCI2_SINGLE_FUNCTION       #language en-US "Single function, "
 210 #string STR_PCI2_PCI_DEVICE            #language en-US "PCI device\r\n"
 211 #string STR_PCI2_P2P_BRIDGE            #language en-US "P2P bridge\r\n"
 212 #string STR_PCI2_CARDBUS_BRIDGE        #language en-US "CardBus bridge\r\n"
 213 #string STR_PCI2_RESERVED              #language en-US "Reserved\r\n"
 214 #string STR_PCI2_CLASS                 #language en-US "Class: "
 215 #string STR_PCI2_BASE_ADDR             #language en-US "Base Address Registers(%x):\r\n"
 216 #string STR_PCI2_START_TYPE            #language en-US "     Start_Address  Type  Space    Prefetchable?     Size             Limit\r\n"
 217 #string STR_PCI2_NONE                  #language en-US "  (None)"
 218 #string STR_PCI2_EXPANSION_ROM_DISABLED #language en-US "\r\nExpansion ROM Disabled(%x)\r\n\r\n"
 219 #string STR_PCI2_EXPANSION_ROM_BASE    #language en-US "\r\nExpansion ROM Base Address(%x): %E%08x%N\r\n\r\n"
 220 #string STR_PCI2_CARDBUS_CIS           #language en-US "Cardbus CIS ptr(%x):   %E%08x%N\r\n"
 221 #string STR_PCI2_SUB_VENDOR_ID         #language en-US "Sub VendorID(%x):          %E%04x%N      "
 222 #string STR_PCI2_SUBSYSTEM_ID          #language en-US "Subsystem ID(%x):      %E%04x%N\r\n"
 223 #string STR_PCI2_CAPABILITIES_PTR      #language en-US "Capabilities Ptr(%x):        %E%02x%N\r\n"
 224 #string STR_PCI2_INTERRUPT_LINE        #language en-US "Interrupt Line(%x):          %E%02x%N      "
 225 #string STR_PCI2_INTERRUPT_PIN         #language en-US "Interrupt Pin(%x):       %E%02x%N\r\n"
 226 #string STR_PCI2_MIN_GNT               #language en-US "Min_Gnt(%x):                 %E%02x%N      "
 227 #string STR_PCI2_MAX_LAT               #language en-US "Max_Lat(%x):             %E%02x%N\r\n"
 228 #string STR_PCI2_BASE_ADDRESS          #language en-US "Base Address Registers(%x):"
 229 #string STR_PCI2_START_TYPE_2          #language en-US "     Start_Address  Type  Space    Prefetchable?     Size             Limit\r\n"
 230 #string STR_PCI2_NO_EXPANSION_ROM      #language en-US "\r\nNo Expansion ROM(%x)    "
 231 #string STR_PCI2_EXPANSION_ROM_BASE_2  #language en-US "\r\nExpansion ROM Base Address(%x): %E%08x%N\r\n"
 232 #string STR_PCI2_BUS_NUMBERS           #language en-US "\r\n\r\n(Bus Numbers)  Primary(%x)     Secondary(%x)   Subordinate(%x)\r\n"
 233 #string STR_PCI2_BRIDGE                #language en-US "               %E%02x%N"
 234 #string STR_PCI2_SECONDARY_TIMER       #language en-US "\r\nSecondary Latency Timer(%x):       %E%02x%N\n\n"
 235 #string STR_PCI2_CARDBUS_LATENCY       #language en-US "\r\nCardBus Latency Timer(%x):         %E%02x%N\r\n"
 236 #string STR_PCI2_RESOURCE_TYPE_2       #language en-US "\r\nResource Type              Type              Base                Limit\r\n"
 237 #string STR_PCI2_MEM_3                 #language en-US "Mem(%x)      %s          %E%08x%N             %E%08x%N\r\n"
 238 #string STR_PCI2_IO_2                  #language en-US "I/O(%x)      %s          %E%08x%N             %E%08x%N\r\n"
 239 #string STR_PCI2_INTERRUPT_LINE_3      #language en-US "\r\nInterrupt Line(%x):     %E%02x%N             Interrupt Pin(%x):       %E%02x%N\r\n"
 240 #string STR_PCI2_SUB_VENDOR_ID_2       #language en-US "\r\nSub VendorID(%x):     %E%04x%N             Subsystem ID(%x):      %E%04x%N\r\n"
 241 #string STR_PCI2_OPTIONAL              #language en-US "Optional 16-Bit PC Card legacy Mode Base Address(%x): %E%08x%N\r\n"
 242 #string STR_PCI2_STATUS                #language en-US "Status(%x): %E%04x%N\r\n"
 243 #string STR_PCI2_SECONDARY_STATUS      #language en-US "Secondary Status(%2x): %E%4x%N\r\n"
 244 #string STR_PCI2_NEW_CAPABILITIES      #language en-US "  (04)New Capabilities linked list:   %E%d%N"
 245 #string STR_PCI2_66_CAPABLE            #language en-US "  (05)66MHz Capable:                %EN/A%N\r\n"
 246 #string STR_PCI2_66_CAPABLE_2          #language en-US "  (05)66MHz Capable:                  %E%d%N\r\n"
 247 #string STR_PCI2_FAST_BACK             #language en-US "  (07)Fast Back-to-Back Capable:      %E%d%N"
 248 #string STR_PCI2_NO                    #language en-US "No     "
 249 #string STR_PCI2_YES                   #language en-US "YES    "
 250 #string STR_PCI2_ONE_VAR_4             #language en-US "\r\n              %E%04x%N  "
 251 #string STR_PCI2_NEWBAR_32             #language en-US "        %08x  "
 252 #string STR_PCI2_NEWBAR_32_2           #language en-US "        %08x"
 253 #string STR_PCI2_RSHIFT                #language en-US "%08x"
 254 #string STR_PCI2_NEWBAR_32_3           #language en-US "%04x              "
 255 #string STR_PCI2_NEWBAR_32_4           #language en-US "%04x"
 256 #string STR_PCI2_CARDBUS_SOCKET        #language en-US "\r\nCardBus Socket Registers/ExCA Base Address Register(%x): %E%8x%N\r\n\r\n"
 257 #string STR_PCI2_BUS_NUMBERS_2         #language en-US "\r\n(Bus Numbers)  Pci(%x)         CardBus(%x)     Subordinate(%x)\r\n"
 258 #string STR_PCI2_CARDBUS               #language en-US "               %E%02x%N"
 259 #string STR_PCI2_CARDBUS_2             #language en-US "                %E%02x%N"
 260 #string STR_PCI2_CARDBUS_3             #language en-US "                %E%02x%N\r\n"
 261 #string STR_PCI2_MASTER_DATA           #language en-US "  (08)Master Data Parity Error:       %E%d%N\r\n"
 262 #string STR_PCI2_DEVSEL_TIMING         #language en-US "  (09)DEVSEL timing:           "
 263 #string STR_PCI2_FAST                  #language en-US "%E    Fast%N"
 264 #string STR_PCI2_MEDIUM                #language en-US "%E  Medium%N"
 265 #string STR_PCI2_SLOW                  #language en-US "%E    Slow%N"
 266 #string STR_PCI2_RESERVED_2            #language en-US "%EReserved%N"
 267 #string STR_PCI2_SIGNALED_TARGET       #language en-US "  (11)Signaled Target Abort:          %E%d%N\r\n"
 268 #string STR_PCI2_RECEIVED_TARGET       #language en-US "  (12)Received Target Abort:          %E%d%N"
 269 #string STR_PCI2_RECEIVED_MASTER       #language en-US "  (13)Received Master Abort:          %E%d%N\r\n"
 270 #string STR_PCI2_SIGNALED_ERROR        #language en-US "  (14)Signaled System Error:          %E%d%N"
 271 #string STR_PCI2_RECEIVED_ERROR        #language en-US "  (14)Received System Error:          %E%d%N"
 272 #string STR_PCI2_DETECTED_ERROR        #language en-US "  (15)Detected Parity Error:          %E%d%N\r\n"
 273 #string STR_PCI2_COMMAND               #language en-US "Command(%x): %E%04x%N\r\n"
 274 #string STR_PCI2_SPACE_ACCESS_DENIED   #language en-US "  (00)I/O space access enabled:       %E%d%N"
 275 #string STR_PCI2_MEMORY_SPACE          #language en-US "  (01)Memory space access enabled:    %E%d%N\r\n"
 276 #string STR_PCI2_BEHAVE_BUS_MASTER     #language en-US "  (02)Behave as bus master:           %E%d%N"
 277 #string STR_PCI2_MONITOR_SPECIAL_CYCLE #language en-US "  (03)Monitor special cycle enabled:  %E%d%N\r\n"
 278 #string STR_PCI2_MEM_WRITE_INVALIDATE  #language en-US "  (04)Mem Write & Invalidate enabled: %E%d%N"
 279 #string STR_PCI2_PALETTE_SNOOPING      #language en-US "  (05)Palette snooping is enabled:    %E%d%N\r\n"
 280 #string STR_PCI2_ASSERT_PERR           #language en-US "  (06)Assert PERR# when parity error: %E%d%N"
 281 #string STR_PCI2_DO_ADDR_STEPPING      #language en-US "  (07)Do address/data stepping:       %E%d%N\r\n"
 282 #string STR_PCI2_SERR_DRIVER           #language en-US "  (08)SERR# driver enabled:           %E%d%N"
 283 #string STR_PCI2_FAST_BACK_2           #language en-US "  (09)Fast back-to-back transact...:  %E%d%N\r\n\r\n"
 284 #string STR_PCI2_BRIDGE_CONTROL        #language en-US "Bridge Control(%x)     %E%04x%N\r\n"
 285 #string STR_PCI2_PARITY_ERROR          #language en-US "  (00)Parity Error Response:          %E%d%N"
 286 #string STR_PCI2_SERR_ENABLE           #language en-US "  (01)SERR# Enable:                   %E%d%N\r\n"
 287 #string STR_PCI2_ISA_ENABLE            #language en-US "  (02)ISA Enable:                     %E%d%N"
 288 #string STR_PCI2_RESOURCE_TYPE         #language en-US "\r\nResource Type                            Base                    Limit\r\n"
 289 #string STR_PCI2_TWO_VARS              #language en-US "I/O(%x)                            %E%08x%N"
 290 #string STR_PCI2_ONE_VAR               #language en-US "                 %E%08x%N\r\n"
 291 #string STR_PCI2_MEMORY                #language en-US "Memory(%x)                         %E%08x%N"
 292 #string STR_PCI2_PREFETCHABLE          #language en-US "Prefetchable Memory(%x)    %E%08x%08x%N"
 293 #string STR_PCI2_TWO_VARS_2            #language en-US "         %E%08x%08x%N\r\n"
 294 #string STR_PCI2_CAPABILITIES_PTR_2    #language en-US "\r\nCapabilities Ptr(%x):   %E%02x%N             \r\n\r\n"
 295 #string STR_PCI2_INTERRUPT_LINE_2      #language en-US "\r\nInterrupt Line(%x)      %E%02x%N             "
 296 #string STR_PCI2_BAR                   #language en-US "\r\n          %E%08x%N  "
 297 #string STR_PCI2_MEM                   #language en-US "Mem   "
 298 #string STR_PCI2_32_BITS               #language en-US "32 bits  "
 299 #string STR_PCI2_ONE_VAR_2             #language en-US "\r\n  %E%08x"
 300 #string STR_PCI2_ONE_VAR_3             #language en-US "%08x%N  "
 301 #string STR_PCI2_64_BITS               #language en-US "64 bits  "
 302 #string STR_PCI2_MEM_2                 #language en-US "Mem            "
 303 #string STR_PCI2_VGA_ENABLE            #language en-US "  (03)VGA Enable:                     %E%d%N\r\n"
 304 #string STR_PCI2_MASTER_ABORT          #language en-US "  (05)Master Abort Mode:              %E%d%N"
 305 #string STR_PCI2_SECONDARY_BUS_RESET   #language en-US "  (06)Secondary Bus Reset:            %E%d%N\r\n"
 306 #string STR_PCI2_FAST_ENABLE           #language en-US "  (07)Fast Back-to-Back Enable:       %E%d%N"
 307 #string STR_PCI2_PRIMARY_DISCARD_TIMER #language en-US "  (08)Primary Discard Timer:       %E%s%N\r\n"
 308 #string STR_PCI2_SECONDARY_DISCARD_TIMER #language en-US "  (09)Secondary Discard Timer:     %E%s%N"
 309 #string STR_PCI2_DISCARD_TIMER_STATUS  #language en-US "  (10)Discard Timer Status:           %E%d%N\r\n"
 310 #string STR_PCI2_DISCARD_TIMER_SERR    #language en-US "  (11)Discard Timer SERR# Enable:     %E%d%N\r\n"
 311 #string STR_PCI2_CARDBUS_RESET         #language en-US "  (06)CardBus Reset:                  %E%d%N\r\n"
 312 #string STR_PCI2_IREQ_ENABLE           #language en-US "  (07)IREQ/INT Enable:                %E%d%N"
 313 #string STR_PCI2_WRITE_POSTING_ENABLE  #language en-US "  (10)Write Posting Enable:           %E%d%N\r\n"
 314 #string STR_PCI_EXT_CAP_AER            #language en-US "  Advanced Error Reporting\r\n"
 315                                                        "    UncorrectableErrorStatus       %08x\r\n"
 316                                                        "    UncorrectableErrorMask         %08x\r\n"
 317                                                        "    UncorrectableErrorSeverity     %08x\r\n"
 318                                                        "    CorrectableErrorStatus         %08x\r\n"
 319                                                        "    CorrectableErrorMask           %08x\r\n"
 320                                                        "    AdvancedErrorCapAndControl     %08x\r\n"
 321                                                        "    HeaderLog1                     %08x\r\n"
 322                                                        "    HeaderLog2                     %08x\r\n"
 323                                                        "    HeaderLog3                     %08x\r\n"
 324                                                        "    HeaderLog4                     %08x\r\n"
 325                                                        "    RootErrorCommand               %08x\r\n"
 326                                                        "    RootErrorStatus                %08x\r\n"
 327                                                        "    ErrorSourceIdentification      %04x\r\n"
 328                                                        "    CorrectableErrorSourceIden     %04x\r\n"
 329                                                        "    TlpPrefixLog1                  %08x\r\n"
 330                                                        "    TlpPrefixLog2                  %08x\r\n"
 331                                                        "    TlpPrefixLog3                  %08x\r\n"
 332                                                        "    TlpPrefixLog4                  %08x\r\n"
 333 #string STR_PCI_EXT_CAP_LINK_CONTROL   #language en-US "  Link Control\r\n"
 334                                                        "    RootComplexLinkCapabilities    %08x\r\n"
 335                                                        "    RootComplexLinkControl         %04x\r\n"
 336                                                        "    RootComplexLinkStatus          %04x\r\n"
 337 #string STR_PCI_EXT_CAP_LINK_DECLAR    #language en-US "  Link Declaration\r\n"
 338                                                        "    ElementSelfDescription         %08x\r\n"
 339 #string STR_PCI_EXT_CAP_LINK_DECLAR2   #language en-US "    LinkEntry[%x]                  %08x\r\n"
 340 #string STR_PCI_EXT_CAP_SN             #language en-US "  Serial Number\r\n"
 341                                                        "    SerialNumber                   %L16x\r\n"
 342 #string STR_PCI_EXT_CAP_POWER          #language en-US "  Power Budgeting\r\n"
 343                                                        "    DataSelect                     %02x\r\n"
 344                                                        "    Data                           %08x\r\n"
 345                                                        "    PowerBudgetCapability          %02x\r\n"
 346 #string STR_PCI_EXT_CAP_ACS            #language en-US "  ACS\r\n"
 347                                                        "    CapabilityRegister             %04x\r\n"
 348                                                        "    ControlRegister                %04x\r\n"
 349 #string STR_PCI_EXT_CAP_ACS2           #language en-US "    EgressControlVectorByte[%x]    %02x\r\n"
 350 #string STR_PCI_EXT_CAP_LAT            #language en-US "  Latency Tolerance Reporting\r\n"
 351                                                        "    MaxSnoopLatency                %04x\r\n"
 352                                                        "    MaxNoSnoopLatency              %04x\r\n"
 353 #string STR_PCI_EXT_CAP_ARI            #language en-US "  ARI\r\n"
 354                                                        "    AriCapability                  %04x\r\n"
 355                                                        "    AriControl                     %04x\r\n"
 356 #string STR_PCI_EXT_CAP_RCRB           #language en-US "  RCRB\r\n"
 357                                                        "    VendorId                       %04x\r\n"
 358                                                        "    DeviceId                       %04x\r\n"
 359                                                        "    RcrbCapabilities               %04x\r\n"
 360                                                        "    RcrbControl                    %04x\r\n"
 361 #string STR_PCI_EXT_CAP_VEN            #language en-US "  VendorSpecific\r\n"
 362                                                        "    VendorSpecificHeader           %04x\r\n"
 363 #string STR_PCI_EXT_CAP_DPA            #language en-US "  DPA\r\n"
 364                                                        "    DpaCapability                  %04x\r\n"
 365                                                        "    DpaLatencyIndicator            %04x\r\n"
 366                                                        "    DpaStatus                      %04x\r\n"
 367                                                        "    DpaControl                     %04x\r\n"
 368 #string STR_PCI_EXT_CAP_DPA2           #language en-US "    DpaPowerAllocationArray[%x]    %02x\r\n"
 369 #string STR_PCI_EXT_CAP_ECEA           #language en-US "  Event Collector Endpoint Association\r\n"
 370                                                        "    AssociationBitmap              %04x\r\n"
 371 #string STR_PCI_EXT_CAP_VC_BASE        #language en-US "  Virtual (Multi) Channel Capability\r\n"
 372                                                        "    ExtendedVcCount                %08x\r\n"
 373                                                        "    PortCapability1                %08x\r\n"
 374                                                        "    PortCapability2                %08x\r\n"
 375                                                        "    ArbitrationTableOffset         %08x\r\n"
 376                                                        "    PortVcControl                  %04x\r\n"
 377                                                        "    PortVcStatus                   %04x\r\n"
 378 #string STR_PCI_EXT_CAP_VC_ITEM        #language en-US "  Virtual Channel Capability Extended Item[%x]\r\n"
 379                                                        "    ResourceCapability             %08x\r\n"
 380                                                        "    ArbitrationTableOffset         %08x\r\n"
 381                                                        "    ResourceControl                %08x\r\n"
 382                                                        "    ResourceStatus                 %04x\r\n"
 383 #string STR_PCI_EXT_CAP_MULTICAST      #language en-US "  MultiCast Capability\r\n"
 384                                                        "    MultiCastCapability            %04x\r\n"
 385                                                        "    MulticastControl               %04x\r\n"
 386                                                        "    McBaseAddress                  %L16x\r\n"
 387                                                        "    McReceiveAddress               %L16x\r\n"
 388                                                        "    McBlockAll                     %L16x\r\n"
 389                                                        "    McBlockUntranslated            %L16x\r\n"
 390                                                        "    McOverlayBar                   %L16x\r\n"
 391 #string STR_PCI_EXT_CAP_RESIZE_BAR     #language en-US "  Resizeable Bar Capability [%x]\r\n"
 392                                                        "    ResizableBarCapability         %08x\r\n"
 393                                                        "    ResizableBarControl            %04x\r\n"
 394 #string STR_PCI_EXT_CAP_TPH            #language en-US "  TPH\r\n"
 395                                                        "    TphRequesterCapability         %08x\r\n"
 396                                                        "    TphRequesterControl            %04x\r\n"
 397                                                        "    TphTable (optional):\r\n"
 398 #string STR_PCI_EXT_CAP_SECONDARY      #language en-US "  Secondary PCI Express Extended Capability\r\n"
 399                                                        "    LinkControl3                   %08x\r\n"
 400                                                        "    LaneErrorStatus                %08x\r\n"
 401                                                        "    EqualizationControl:\r\n"
 402
 403 #string STR_DMPSTORE_SAVE              #language en-US "Save variable to file: %H%s%N.\r\n"
 404 #string STR_DMPSTORE_LOAD              #language en-US "Load and set variables from file: %H%s%N.\r\n"
 405 #string STR_DMPSTORE_LOAD_GEN_FAIL     #language en-US "%H%s%N: Failed to set variable %H%s%N: %r.\r\n"
 406 #string STR_DMPSTORE_LOAD_BAD_FILE     #language en-US "%H%s%N: Incorrect file format.\r\n"
 407 #string STR_DMPSTORE_HEADER_LINE       #language en-US "Variable %H%s%N '%H%g%N:%H%s%N' DataSize = 0x%02x\r\n"
 408 #string STR_DMPSTORE_DELETE_LINE       #language en-US "Delete variable '%H%g%N:%H%s%N': %r\r\n"
 409 #string STR_DMPSTORE_NO_VAR_FOUND      #language en-US "%H%s%N: No matching variables found.\r\n"
 410 #string STR_DMPSTORE_NO_VAR_FOUND_SFO  #language en-US "VariableInfo,\"\",\"\",\"\",\"\",\"\"\r\n"
 411 #string STR_DMPSTORE_NO_VAR_FOUND_GN   #language en-US "%H%s%N: No matching variables found. Guid %g, Name %s\r\n"
 412 #string STR_DMPSTORE_NO_VAR_FOUND_NG_SFO #language en-US "VariableInfo,\"%s\",\"%g\",\"\",\"\",\"\"\r\n"
 413 #string STR_DMPSTORE_NO_VAR_FOUND_N    #language en-US "%H%s%N: No matching variables found. Name %s\r\n"
 414 #string STR_DMPSTORE_NO_VAR_FOUND_N_SFO #language en-US #language en-US "VariableInfo,\"%s\",\"\",\"\",\"\",\"\"\r\n"
 415 #string STR_DMPSTORE_NO_VAR_FOUND_G    #language en-US "%H%s%N: No matching variables found. Guid %g\r\n"
 416 #string STR_DMPSTORE_NO_VAR_FOUND_G_SFO #language en-US "VariableInfo,\"\",\"%g\",\"\",\"\",\"\"\r\n"
 417 #string STR_DMPSTORE_VAR_SFO           #language en-US "VariableInfo,\"%s\",\"%g\",\"0x%x\",\"0x%x\",\"%s\"\r\n"
 418
 419 #string STR_GET_HELP_COMP         #language en-US ""
 420 ".TH comp 0 "Compare 2 files"\r\n"
 421 ".SH NAME\r\n"
 422 "Compares the contents of two files on a byte-for-byte basis.\r\n"
 423 ".SH SYNOPSIS\r\n"
 424 " \r\n"
 425 "COMP [-b] file1 file2\r\n"
 426 ".SH OPTIONS\r\n"
 427 " \r\n"
 428 "  -b    - Displays one screen at a time.\r\n"
 429 "  file1 - Specifies a first file name  (directory name or wildcards not permitted).\r\n"
 430 "  file2 - Specifies a second file name (directory name or wildcards not permitted).\r\n"
 431 ".SH DESCRIPTION\r\n"
 432 " \r\n"
 433 "NOTES:\r\n"
 434 "  1. This command compares the contents of two files in binary mode.\r\n"
 435 "  2. It displays up to 10 differences between the two files. For each\r\n"
 436 "     difference, up to 32 bytes from the location where the difference starts\r\n"
 437 "     is dumped.\r\n"
 438 "  3. It will exit immediately if the lengths of the compared files are\r\n"
 439 "     different.\r\n"
 440 ".SH EXAMPLES\r\n"
 441 " \r\n"
 442 "EXAMPLES:\r\n"
 443 "  * To compare two files with the same length but different contents:\r\n"
 444 "    fs0:\> comp bios.inf bios2.inf\r\n"
 445 ".SH RETURNVALUES\r\n"
 446 " \r\n"
 447 "RETURN VALUES:\r\n"
 448 "  SHELL_SUCCESS              The function operated as expected.\r\n"
 449 "  SHELL_NOT_EQUAL            The files were not identical.\r\n"
 450 "  SHELL_INVALID_PARAMETER    One of the passed in parameters was incorrectly\r\n"
 451 "                             formatted or its value was out of bounds.\r\n"
 452 "  SHELL_SECURITY_VIOLATION   This function was not performed due to a security\r\n"
 453 "                             violation.\r\n"
 454 "  SHELL_NOT_FOUND            The requested file was not found.\r\n"
 455
 456 #string STR_GET_HELP_SETSIZE      #language en-US ""
 457 ".TH setsize 0 "Set file size"\r\n"
 458 ".SH NAME\r\n"
 459 "Adjusts the size of a file.\r\n"
 460 ".SH SYNOPSIS\r\n"
 461 " \r\n"
 462 "SETSIZE size file [file...]\r\n"
 463 ".SH OPTIONS\r\n"
 464 " \r\n"
 465 "  size - Specifies the size of the file after it is adjusted.\r\n"
 466 "  file - Specifies the file or files to be adjusted.\r\n"
 467 ".SH DESCRIPTION\r\n"
 468 " \r\n"
 469 "NOTES:\r\n"
 470 "  1. Setting the size smaller than the actual data contained in this file will\r\n"
 471 "     truncate its data.\r\n"
 472 "  2. This command adjusts the size of a particular target file.\r\n"
 473 "  3. This command automatically truncates or extends the size of a file based on the passed-in\r\n"
 474 "     parameters. If the file does not exist, it is created.\r\n"
 475 ".SH RETURNVALUES\r\n"
 476 " \r\n"
 477 "RETURN VALUES:\r\n"
 478 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 479 "  SHELL_VOLUME_FULL         The media has insufficient space to complete the\r\n"
 480 "                            request.\r\n"
 481 "  SHELL_INVALID_PARAMETER   One of the passed in parameters was incorrectly\r\n"
 482 "                            formatted or its value was out of bounds.\r\n"
 483
 484 #string STR_GET_HELP_MODE         #language en-US ""
 485 ".TH mode 0 "Shows or changes ConOut mode."\r\n"
 486 ".SH NAME\r\n"
 487 "Displays or changes the console output device mode.\r\n"
 488 ".SH SYNOPSIS\r\n"
 489 " \r\n"
 490 "MODE [col row]\r\n"
 491 ".SH OPTIONS\r\n"
 492 " \r\n"
 493 "  col - Specifies the number of columns.\r\n"
 494 "  row - Specifies the number of rows.\r\n"
 495 ".SH DESCRIPTION\r\n"
 496 " \r\n"
 497 "NOTES:\r\n"
 498 "  1. This command changes the display mode for the console output\r\n"
 499 "     device.\r\n"
 500 "  2. When this command is used without any parameters, it shows the list of\r\n"
 501 "     modes that the standard output device currently supports.\r\n"
 502 "  3. When used with the row and col parameter, this command\r\n"
 503 "     changes the number of rows and columns on the standard output device.\r\n"
 504 "  4. The current selected mode is indicated by a '*'. \r\n"
 505 "  5. The display is cleared every time this command is used to change the\r\n"
 506 "     currently selected display mode.\r\n"
 507 ".SH EXAMPLES\r\n"
 508 " \r\n"
 509 "EXAMPLES:\r\n"
 510 "  * To display all available modes on standard output:\r\n"
 511 "    Shell> mode\r\n"
 512 " \r\n"
 513 "  * To change the current mode setting:\r\n"
 514 "    Shell> mode 80 50\r\n"
 515 ".SH RETURNVALUES\r\n"
 516 " \r\n"
 517 "RETURN VALUES:\r\n"
 518 "  SHELL_SUCCESS              The action was completed as requested.\r\n"
 519 "  SHELL_SECURITY_VIOLATION   This function was not performed due to a security\r\n"
 520 "                             violation.\r\n"
 521 "  SHELL_INVALID_PARAMETER    One of the passed-in parameters was incorrectly\r\n"
 522 "                             formatted or its value was out of bounds.\r\n"
 523
 524 #string STR_GET_HELP_MEMMAP       #language en-US ""
 525 ".TH memmap 0 "Displays the memory map."\r\n"
 526 ".SH NAME\r\n"
 527 "Displays the memory map maintained by the UEFI environment.\r\n"
 528 ".SH SYNOPSIS\r\n"
 529 " \r\n"
 530 "MEMMAP [-b] [-sfo]\r\n"
 531 ".SH OPTIONS\r\n"
 532 " \r\n"
 533 "  -b   - Displays one screen at a time\r\n"
 534 "  -sfo - Displays information as described in Standard-Format Output.\r\n"
 535 ".SH DESCRIPTION\r\n"
 536 " \r\n"
 537 "NOTES:\r\n"
 538 "  1. The UEFI environment keeps track of all the physical memory in the system\r\n"
 539 "     and how it is currently being used.\r\n"
 540 "  2. Total Memory is the physical memory size excluding Reserved, Unusable,\r\n"
 541 "     MemoryMappedIO, and MemoryMappedIOPortSpace memory types.\r\n"
 542 "  3. Refer to the UEFI specification for memory type definitions.\r\n"
 543 ".SH EXAMPLES\r\n"
 544 " \r\n"
 545 "EXAMPLES:\r\n"
 546 "  * To display the system memory map:\r\n"
 547 "    Shell> memmap\r\n"
 548 " \r\n"
 549
 550 #string STR_GET_HELP_EFICOMPRESS  #language en-US ""
 551 ".TH eficompress 0 "compresses a file."\r\n"
 552 ".SH NAME\r\n"
 553 "Compresses a file using UEFI Compression Algorithm.\r\n"
 554 ".SH SYNOPSIS\r\n"
 555 " \r\n"
 556 "EFICOMPRESS infile outfile\r\n"
 557 ".SH OPTIONS\r\n"
 558 " \r\n"
 559 "  infile  - Specifies the file name of the uncompressed input file.\r\n"
 560 "  outfile - Specifies the file name of the compressed output file.\r\n"
 561 ".SH DESCRIPTION\r\n"
 562 " \r\n"
 563 "NOTES:\r\n"
 564 "  1. This command compresses a file using UEFI Compression Algorithm\r\n"
 565 "     and writes the compressed form out to a new file.\r\n"
 566 ".SH EXAMPLES\r\n"
 567 " \r\n"
 568 "EXAMPLES:\r\n"
 569 "  * To compress a file named 'uncompressed' to a file named 'compressed':\r\n"
 570 "    fs0:\> eficompress uncompressed compressed\r\n"
 571
 572 #string STR_GET_HELP_EFIDCOMPRESS #language en-US ""
 573 ".TH efidecompress 0 "Decompresses a file."\r\n"
 574 ".SH NAME\r\n"
 575 "Decompresses a file using UEFI Decompression Algorithm.\r\n"
 576 ".SH SYNOPSIS\r\n"
 577 " \r\n"
 578 "EFIDECOMPRESS infile outfile\r\n"
 579 ".SH OPTIONS\r\n"
 580 " \r\n"
 581 "  infile  - Specifies the file name of the compressed input file.\r\n"
 582 "  outfile - Specifies the file name of the decompressed output file.\r\n"
 583 ".SH DESCRIPTION\r\n"
 584 " \r\n"
 585 "NOTES:\r\n"
 586 "  1. This decompresses a file using UEFI Decompression\r\n"
 587 "     Algorithm and writes the decompressed form out to a new file.\r\n"
 588 ".SH EXAMPLES\r\n"
 589 " \r\n"
 590 "EXAMPLES:\r\n"
 591 "  * To decompress a file named 'compressed' to a file named 'uncompressed':\r\n"
 592 "    fs0:\> efidecompress compressed uncompressed\r\n"
 593
 594 #string STR_GET_HELP_DMEM         #language en-US ""
 595 ".TH dmem 0 "Displays memory."\r\n"
 596 ".SH NAME\r\n"
 597 "Displays the contents of system or device memory.\r\n"
 598 ".SH SYNOPSIS\r\n"
 599 " \r\n"
 600 "DMEM [-b] [address] [size] [-MMIO]\r\n"
 601 ".SH OPTIONS\r\n"
 602 " \r\n"
 603 "  -b      - Displays one screen at a time.\r\n"
 604 "  -MMIO   - Forces address cycles to the PCI bus.\r\n"
 605 "  address - Specifies a starting address in hexadecimal format.\r\n"
 606 "  size    - Specifies the number of bytes to display in hexadecimal format.\r\n"
 607 ".SH DESCRIPTION\r\n"
 608 " \r\n"
 609 "NOTES:\r\n"
 610 "  1. This command displays the contents of system memory or device memory.\r\n"
 611 "  2. Enter address and size in hexadecimal format.\r\n"
 612 "  3. If address is not specified, the contents of the UEFI System Table\r\n"
 613 "     are displayed. Otherwise, memory starting at the specified address is displayed.\r\n"
 614 "  4. Size specifies the number of bytes to display. If size is not specified,\r\n"
 615 "     512 bytes are displayed.\r\n"
 616 "  5. If MMIO is not specified, main system memory is displayed. Otherwise,\r\n"
 617 "     device memory is displayed through the use of the\r\n"
 618 "     EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.\r\n"
 619 ".SH EXAMPLES\r\n"
 620 " \r\n"
 621 "EXAMPLES:\r\n"
 622 "  * To display the UEFI system table pointer entries:\r\n"
 623 "    fs0:\> dmem\r\n"
 624 " \r\n"
 625 "  * To display memory contents from 1af3088 with size of 16 bytes:\r\n"
 626 "    Shell> dmem 1af3088 16\r\n"
 627 " \r\n"
 628 "  * To display memory mapped IO contents from 1af3088 with a size of 16 bytes:\r\n"
 629 "    Shell> dmem 1af3088 16 -MMIO\r\n"
 630
 631 #string STR_GET_HELP_MM           #language en-US ""
 632 ".TH mm 0 "Displays or modifies address space memory."\r\n"
 633 ".SH NAME\r\n"
 634 "Displays or modifies MEM/MMIO/IO/PCI/PCIE address space.\r\n"
 635 ".SH SYNOPSIS\r\n"
 636 " \r\n"
 637 "MM Address [Value] [-w 1|2|4|8] [-MEM | -MMIO | -IO | -PCI | -PCIE] [-n]\r\n"
 638 ".SH OPTIONS\r\n"
 639 " \r\n"
 640 "  Address - Specifies a starting address.\r\n"
 641 "  Value   - Specifies the value to write.\r\n"
 642 "  -MEM    - Memory Address type\r\n"
 643 "  -MMIO   - Memory Mapped IO Address type\r\n"
 644 "  -IO     - IO Address type\r\n"
 645 "  -PCI    - PCI Configuration Space Address type:\r\n"
 646 "            Address format: 0x000000ssbbddffrr\r\n"
 647 "              ss   - Segment\r\n"
 648 "              bb   - Bus\r\n"
 649 "              dd   - Device\r\n"
 650 "              ff   - Function\r\n"
 651 "              rr   - Register\r\n"
 652 "  -PCIE   - PCIE Configuration Space Address type:\r\n"
 653 "            Address format: 0x00000ssbbddffrrr\r\n"
 654 "              ss   - Segment\r\n"
 655 "              bb   - Bus\r\n"
 656 "              dd   - Device\r\n"
 657 "              ff   - Function\r\n"
 658 "              rrr  - Register\r\n"
 659 "  -w      - Unit size accessed in bytes:\r\n"
 660 "              1    - 1 byte\r\n"
 661 "              2    - 2 bytes\r\n"
 662 "              4    - 4 bytes\r\n"
 663 "              8    - 8 bytes\r\n"
 664 "  -n      - Non-interactive mode\r\n"
 665 ".SH DESCRIPTION\r\n"
 666 " \r\n"
 667 "NOTES:\r\n"
 668 "  1.  If the address type parameter is not specified, address type defaults\r\n"
 669 "      to the 'MEM' type.\r\n"
 670 "  2.  If the 'Value' parameter is specified, the '-n' option is used and\r\n"
 671 "      the command writes the value to the\r\n"
 672 "      specified address in non-interactive mode. If the 'Value' parameter is\r\n"
 673 "      not specified, only the current contents in the address are displayed.\r\n"
 674 "  3.  If the '-w' option is not specified, unit size defaults to 1 byte.\r\n"
 675 "  4.  If the PCI address type is specified, the 'Address' parameter must\r\n"
 676 "      follow the PCI Configuration Space Address format above. The 'PCI'\r\n"
 677 "      command can be used to determine the address for a specified device.\r\n"
 678 "      It is listed in the PCI configuration space dump information in the\r\n"
 679 "      following format: "[EFI 0x000000ssbbddffxx]".\r\n"
 680 "  5.  If the PCIE address type is specified, the 'Address' parameter must\r\n"
 681 "      follow the PCIE Configuration Space Address format above.\r\n"
 682 "  6.  In interactive mode, type a hex value to modify, 'q' or '.' to exit.\r\n"
 683 "      If the '-n' option is specified, it runs in non-interactive mode,\r\n"
 684 "      which supports batch file operation without user intervention.\r\n"
 685 "  7.  Not all PCI configuration register locations are writable.\r\n"
 686 "  8.  MM will only write the specified value. Read-modify-write operations\r\n"
 687 "      are not supported.\r\n"
 688 "  9.  The 'Address' parameter must be aligned on a boundary of the\r\n"
 689 "      specified width.\r\n"
 690 "  10. Not all addresses are safe to access. Access to any improper address\r\n"
 691 "      can bring unexpected results.\r\n"
 692 ".SH EXAMPLES\r\n"
 693 " \r\n"
 694 "EXAMPLES:\r\n"
 695 "  * To display or modify memory:\r\n"
 696 "    Address 0x1b07288, default width=1 byte:\r\n"
 697 "    fs0:\> mm 1b07288\r\n"
 698 "    MEM  0x0000000001B07288 : 0x6D >\r\n"
 699 "    MEM  0x0000000001B07289 : 0x6D >\r\n"
 700 "    MEM  0x0000000001B0728A : 0x61 > 80\r\n"
 701 "    MEM  0x0000000001B0728B : 0x70 > q\r\n"
 702 "    fs0:\> mm 1b07288\r\n"
 703 "    MEM  0x0000000001B07288 : 0x6D >\r\n"
 704 "    MEM  0x0000000001B07289 : 0x6D >\r\n"
 705 "    MEM  0x0000000001B0728A : 0x80 >        *Modified\r\n"
 706 "    MEM  0x0000000001B0728B : 0x70 > q\r\n"
 707 " \r\n"
 708 "  * To modify memory: Address 0x1b07288, width = 2 bytes:\r\n"
 709 "    Shell> mm 1b07288 -w 2\r\n"
 710 "    MEM  0x0000000001B07288 : 0x6D6D >\r\n"
 711 "    MEM  0x0000000001B0728A : 0x7061 > 55aa\r\n"
 712 "    MEM  0x0000000001B0728C : 0x358C > q\r\n"
 713 "    Shell> mm 1b07288 -w 2\r\n"
 714 "    MEM  0x0000000001B07288 : 0x6D6D >\r\n"
 715 "    MEM  0x0000000001B0728A : 0x55AA >      *Modified\r\n"
 716 "    MEM  0x0000000001B0728C : 0x358C > q\r\n"
 717 " \r\n"
 718 "  * To display IO space:   Address 80h, width = 4 bytes:\r\n"
 719 "    Shell> mm 80 -w 4 -IO\r\n"
 720 "    IO  0x0000000000000080 : 0x000000FE >\r\n"
 721 "    IO  0x0000000000000084 : 0x00FF5E6D > q\r\n"
 722 " \r\n"
 723 "  * To modify IO space using non-interactive mode:\r\n"
 724 "    Shell> mm 80 52 -w 1 -IO\r\n"
 725 "    Shell> mm 80 -w 1 -IO\r\n"
 726 "    IO  0x0000000000000080 : 0x52 > FE      *Modified\r\n"
 727 "    IO  0x0000000000000081 : 0xFF >\r\n"
 728 "    IO  0x0000000000000082 : 0x00 >\r\n"
 729 "    IO  0x0000000000000083 : 0x00 >\r\n"
 730 "    IO  0x0000000000000084 : 0x6D >\r\n"
 731 "    IO  0x0000000000000085 : 0x5E >\r\n"
 732 "    IO  0x0000000000000086 : 0xFF >\r\n"
 733 "    IO  0x0000000000000087 : 0x00 > q\r\n"
 734 " \r\n"
 735 "  * To display PCI configuration space, ss=00, bb=00, dd=00, ff=00, rr=00:\r\n"
 736 "    Shell> mm 0000000000 -PCI\r\n"
 737 "    PCI  0x0000000000000000 : 0x86 >\r\n"
 738 "    PCI  0x0000000000000001 : 0x80 >\r\n"
 739 "    PCI  0x0000000000000002 : 0x30 >\r\n"
 740 "    PCI  0x0000000000000003 : 0x11 >\r\n"
 741 "    PCI  0x0000000000000004 : 0x06 >\r\n"
 742 "    PCI  0x0000000000000005 : 0x00 > q\r\n"
 743 "    These contents can also be displayed by 'PCI 00 00 00'.\r\n"
 744 " \r\n"
 745 "  * To display PCIE configuration space, ss=00, bb=06, dd=00, ff=00, rrr=000:\r\n"
 746 "    Shell> mm 00060000000 -PCIE\r\n"
 747 "    PCIE  0x0000000060000000 : 0xAB >\r\n"
 748 "    PCIE  0x0000000060000001 : 0x11 >\r\n"
 749 "    PCIE  0x0000000060000002 : 0x61 >\r\n"
 750 "    PCIE  0x0000000060000003 : 0x43 >\r\n"
 751 " \r\n"
 752
 753 #string STR_GET_HELP_LOAD_PCI_ROM #language en-US ""
 754 ".TH loadpcirom 0 "Loads a PCI option ROM file."\r\n"
 755 ".SH NAME\r\n"
 756 "Loads a PCI Option ROM.\r\n"
 757 ".SH SYNOPSIS\r\n"
 758 " \r\n"
 759 "LoadPciRom [-nc] romfile [romfile...]\r\n"
 760 ".SH OPTIONS\r\n"
 761 " \r\n"
 762 "  -nc     - Loads the ROM image(s) but does not connect drivers.\r\n"
 763 "  romfile - Specifies the PCI option ROM image file (wildcards are permitted).\r\n"
 764 ".SH DESCRIPTION\r\n"
 765 " \r\n"
 766 "NOTES:\r\n"
 767 "  1. This command loads PCI option ROM images into memory for\r\n"
 768 "     execution.\r\n"
 769 "  2. The file can contain legacy images and multiple PE32 images, in which case\r\n"
 770 "     all PE32 images are loaded.\r\n"
 771 ".SH EXAMPLES\r\n"
 772 " \r\n"
 773 "EXAMPLES:\r\n"
 774 "  * To load a rom file 'rom.bin':\r\n"
 775 "    fs0:\> LoadPciRom rom.bin\r\n"
 776 " \r\n"
 777 "  * To load '*.bin' files without connecting drivers:\r\n"
 778 "    fs0:\> LoadPciRom -nc *.bin\r\n"
 779
 780 #string STR_GET_HELP_SETVAR       #language en-US ""
 781 ".TH setvar 0 "Displays or modifies a UEFI variable."\r\n"
 782 ".SH NAME\r\n"
 783 "Displays or modifies a UEFI variable.\r\n"
 784 ".SH SYNOPSIS\r\n"
 785 " \r\n"
 786 "SETVAR variable-name [-guid guid][-bs][-rt][-nv] [=data]\r\n"
 787 ".SH OPTIONS\r\n"
 788 " \r\n"
 789 "  variable-name - Specifies the name of the UEFI variable to modify or display.\r\n"
 790 "  -guid         - Specifies the GUID of the UEFI variable to modify or display.\r\n"
 791 "                  If not present, GUID EFI_GLOBAL_VARIABLE is assumed.\r\n"
 792 "  -bs           - Indicates that the variable is a boot variable. Applies to a new variable;\r\n"
 793 "                  otherwise, it is ignored. \r\n"
 794 "  -rt           - Indicates that the variable is a runtime variable. Applies to a new variable;\r\n"
 795 "                  otherwise, it is ignored. \r\n"
 796 "  -nv           - Indicates that the variable is non-volatile. If not present,\r\n"
 797 "                  then the variable is assumed to be volatile. Applies to a new variable;\r\n"
 798 "                  otherwise, it is ignored. \r\n"
 799 "  =data         - Specifies there is new data for the variable. If there is nothing after the '='\r\n"
 800 "                  then the variable is deleted. If '=' is not present, then the\r\n"
 801 "                  current value of the variable is dumped as hex bytes.\r\n"
 802 "                  The data can consist of zero or more of the following:\r\n"
 803 "                    xx[xx]         - Hexadecimal bytes\r\n"
 804 "                    ^"ascii-string^" - ASCII-string with no null-terminator\r\n"
 805 "                    L^"UCS2-string^" - UCS-2 encoded string with no\r\n"
 806 "                                     null-terminator\r\n"
 807 "                    --device       - Device path text format\r\n"
 808 ".SH DESCRIPTION\r\n"
 809 " \r\n"
 810 "NOTES:\r\n"
 811 "  1. This command changes the UEFI variable specified by name and GUID.\r\n"
 812 "  2. If = is specified, but data is not, the variable is deleted, if it exists.\r\n"
 813 "  3. If = is not specified, then the current variable contents are displayed.\r\n"
 814 "  4. If =data is specified, then the variable's value is changed to the value\r\n"
 815 "     specified by data.\r\n"
 816 "  5. -bs, -rt and -nv are only useful if the variable does not exist.\r\n"
 817 "  6. If the variable already exists, the attributes cannot be changed, and the"
 818 "     flags will be ignored.\r\n"
 819 ".SH RETURNVALUES\r\n"
 820 " \r\n"
 821 "RETURN VALUES:\r\n"
 822 "  SHELL_SUCCESS             The shell has stored the variable and its data with\r\n"
 823 "                            the defined attributes.\r\n"
 824 "  SHELL_INVALID_PARAMETER   Incorrect attributes were used.\r\n"
 825 "  SHELL_OUT_OF_RESOURCES    Insufficient resources were available for storing\r\n"
 826 "                            the variable and its data.\r\n"
 827 "  SHELL_DEVICE_ERROR The    Variable could not be saved due to a hardware\r\n"
 828 "                            error.\r\n"
 829 "  SHELL_WRITE_PROTECTED     The variable in question is read-only.\r\n"
 830 "  SHELL_WRITE_PROTECTED     The variable in question cannot be deleted.\r\n"
 831 "  SHELL_NOT_FOUND           The variable could not be found.\r\n"
 832
 833 #string STR_GET_HELP_SERMODE      #language en-US ""
 834 ".TH sermode 0 "configure serial port"\r\n"
 835 ".SH NAME\r\n"
 836 "Sets serial port attributes.\r\n"
 837 ".SH SYNOPSIS\r\n"
 838 " \r\n"
 839 "SERMODE [handle [baudrate parity databits stopbits]]\r\n"
 840 ".SH OPTIONS\r\n"
 841 " \r\n"
 842 "  handle   - Specifies a device handle for a serial port in hexadecimal format.\r\n"
 843 "  baudrate - Specifies a baud rate for specified serial port.\r\n"
 844 "  parity   - Sets parity bit settings for specified serial port. Valid values\r\n"
 845 "             are:\r\n"
 846 "               d   - Default parity\r\n"
 847 "               n   - No parity\r\n"
 848 "               e   - Even parity\r\n"
 849 "               o   - Odd parity\r\n"
 850 "               m   - Mark parity\r\n"
 851 "               s   - Space parity\r\n"
 852 "  databits - Sets the data bits for the specified serial port.\r\n"
 853 "  stopbits - Sets the stop bits for the specified serial port.\r\n"
 854 ".SH DESCRIPTION\r\n"
 855 " \r\n"
 856 "NOTES:\r\n"
 857 "  1. The 'handle' parameter is the device handle of the desired serial port.\r\n"
 858 "     The 'DH' command can be used to retrieve this information.\r\n"
 859 "  2. The 'stopbits' parameter supports the following settings:\r\n"
 860 "       0  (0 stop bits - default setting)\r\n"
 861 "       1  (1 stop bit)\r\n"
 862 "       2  (2 stop bits)\r\n"
 863 "       15 (1.5 stop bits)\r\n"
 864 "     All other settings are invalid.\r\n"
 865 "  3. The 'baudrate' parameter supports the following settings:\r\n"
 866 "     50, 75, 110, 150, 300, 600, 1200, 1800, 2000, 2400, 3600, 4800,\r\n"
 867 "     7200, 9600(default), 19200, 38400, 57600, 115200, 230400, 460800\r\n"
 868 "     All other values will be converted to the next highest setting.\r\n"
 869 "  4. The 'databits' parameter supports the following settings:\r\n"
 870 "       4\r\n"
 871 "       7\r\n"
 872 "       8 (default)\r\n"
 873 "     All other settings are invalid.\r\n"
 874 "  5. Parity attributes are mutually exclusive.\r\n"
 875 ".SH EXAMPLES\r\n"
 876 " \r\n"
 877 "EXAMPLES:\r\n"
 878 "  * To display the settings for all serial port devices:\r\n"
 879 "    Shell> sermode\r\n"
 880 " \r\n"
 881 "  * To display the settings for the serial port device whose handle is 0x6B:\r\n"
 882 "    Shell> sermode 6B\r\n"
 883 " \r\n"
 884 "  * To configure the serial port settings for handle 0x6B to 9600bps, even\r\n"
 885 "    parity, 8 data bits, and 1 stop bit:\r\n"
 886 "    Shell> sermode 6B 9600 e 8 1\r\n"
 887 ".SH RETURNVALUES\r\n"
 888 " \r\n"
 889 "RETURN VALUES:\r\n"
 890 "  SHELL_SUCCESS             The new attributes were set on the serial device.\r\n"
 891 "  SHELL_INVALID_PARAMETER   One or more of the attributes has an unsupported\r\n"
 892 "                            value.\r\n"
 893 "  SHELL_DEVICE_ERROR        The serial device is not functioning correctly.\r\n"
 894
 895 #string STR_GET_HELP_PCI          #language en-US ""
 896 ".TH pci 0 "Displays PCI device information."\r\n"
 897 ".SH NAME\r\n"
 898 "Displays a PCI device list or PCI function configuration space of a device.\r\n"
 899 ".SH SYNOPSIS\r\n"
 900 " \r\n"
 901 "PCI [Bus Dev [Func] [-s Seg] [-i]]\r\n"
 902 ".SH OPTIONS\r\n"
 903 " \r\n"
 904 "  -s   - Specifies optional segment number.\r\n"
 905 "  -i   - Displays interpreted information.\r\n"
 906 "  Bus  - Specifies a bus number.\r\n"
 907 "  Dev  - Specifies a device number.\r\n"
 908 "  Func - Specifies a function number.\r\n"
 909 ".SH DESCRIPTION\r\n"
 910 " \r\n"
 911 "NOTES:\r\n"
 912 "  1. This command displays a list of all the PCI devices found in the system. It\r\n"
 913 "     also displays the configuration space of a PCI device according to the\r\n"
 914 "     specified bus (Bus), device (Dev), and function (Func) addresses. If the\r\n"
 915 "     function address is not specified, it defaults to 0.\r\n"
 916 "  2. The -i option displays verbose information for the specified PCI\r\n"
 917 "     device. The PCI configuration space for the device is displayed with\r\n"
 918 "     a detailed interpretation.\r\n"
 919 "  3. If no parameters are specified, all PCI devices are listed.\r\n"
 920 "  4. If the 'Bus' and 'Dev' parameters are specified but the 'Func' or\r\n"
 921 "     'Seg' parameters are not, Function or Seg are set to the default value of 0.\r\n"
 922 ".SH EXAMPLES\r\n"
 923 " \r\n"
 924 "EXAMPLES:\r\n"
 925 "  * To display all PCI devices in the system:\r\n"
 926 "    Shell> pci\r\n"
 927 " \r\n"
 928 "  * To display the configuration space of Bus 0, Device 0, Function 0:\r\n"
 929 "    Shell> pci 00 00 00 -i\r\n"
 930 " \r\n"
 931 "  * To display configuration space of Segment 0, Bus 0, Device 0, Function 0:\r\n"
 932 "    Shell> pci 00 00 00 -s 0\r\n"
 933 ".SH RETURNVALUES\r\n"
 934 " \r\n"
 935 "RETURN VALUES:\r\n"
 936 "  SHELL_SUCCESS        Data was displayed as requested.\r\n"
 937 "  SHELL_DEVICE_ERROR   The specified device parameters did not match a physical\r\n"
 938 "                       device in the system.\r\n"
 939
 940 #string STR_GET_HELP_SMBIOSVIEW   #language en-US ""
 941 ".TH smbiosview 0 "Displays SMBIOS information."\r\n"
 942 ".SH NAME\r\n"
 943 "Displays SMBIOS information.\r\n"
 944 ".SH SYNOPSIS\r\n"
 945 " \r\n"
 946 "SMBIOSVIEW [-t SmbiosType]|[-h SmbiosHandle]|[-s]|[-a]\r\n"
 947 ".SH OPTIONS\r\n"
 948 " \r\n"
 949 "  -t            - Displays all structures of SmbiosType.\r\n"
 950 "  -h            - Displays structure of SmbiosHandle.\r\n"
 951 "  -s            - Displays a statistics table.\r\n"
 952 "  -a            - Displays all information.\r\n"
 953 "  SmbiosType    - Specifies a SMBIOS structure type.\r\n"
 954 "  SmbiosHandle  - Specifies a SMBIOS structure unique 16-bit handle.\r\n"
 955 ".SH DESCRIPTION\r\n"
 956 " \r\n"
 957 "NOTES:\r\n"
 958 "  1. The SmbiosType parameter supports the following types:\n"
 959 "       0  - BIOS Information\r\n"
 960 "       1  - System Information\r\n"
 961 "       2  - Baseboard Information\r\n"
 962 "       3  - System Enclosure\r\n"
 963 "       4  - Processor Information\r\n"
 964 "       5  - Memory Controller Information\r\n"
 965 "       6  - Memory Module Information\r\n"
 966 "       7  - Cache Information\r\n"
 967 "       8  - Port Connector Information\r\n"
 968 "       9  - System Slots\r\n"
 969 "       10 - On Board Devices Information\r\n"
 970 "       11 - OEM Strings\r\n"
 971 "       12 - System Configuration Options\r\n"
 972 "       13 - BIOS Language Information\r\n"
 973 "       14 - Group Associations\r\n"
 974 "       15 - System Event Log\r\n"
 975 "       16 - Physical Memory Array\r\n"
 976 "       17 - Memory Device\r\n"
 977 "       18 - 32-bit Memory Error Information\r\n"
 978 "       19 - Memory Array Mapped Address\r\n"
 979 "       20 - Memory Device Mapped Address\r\n"
 980 "       21 - Built-in Pointing Device\r\n"
 981 "       22 - Portable Battery\r\n"
 982 "       23 - System Reset\r\n"
 983 "       24 - Hardware Security\r\n"
 984 "       25 - System Power Controls\r\n"
 985 "       26 - Voltage Probe\r\n"
 986 "       27 - Cooling Device\r\n"
 987 "       28 - Temperature Probe\r\n"
 988 "       29 - Electrical Current Probe\r\n"
 989 "       30 - Out-Of-Band Remote Access\r\n"
 990 "       31 - Boot Integrity Services (BIS) Entry Point\r\n"
 991 "       32 - System Boot Information\r\n"
 992 "       33 - 64-Bit Memory Error Information\r\n"
 993 "       34 - Management Device\r\n"
 994 "       35 - Management Device Component\r\n"
 995 "       36 - Management Device Threshold Data\r\n"
 996 "       37 - Memory Channel\r\n"
 997 "       38 - IPMI Device Information\r\n"
 998 "       39 - System Power Supply\r\n"
 999 "       40 - Additional Information\r\n"
1000 "       41 - Onboard Devices Extended Information\r\n"
1001 "       42 - Management Controller Host Interface\r\n"
1002 "  2. Enter the SmbiosHandle parameter in hexadecimal format.\r\n"
1003 "     Do not use the '0x' prefix format for hexadecimal values.\r\n"
1004 "  3. Internal commands:\r\n"
1005 "       :q --------  quit smbiosview\r\n"
1006 "       :0 --------  Change smbiosview display NONE info\r\n"
1007 "       :1 --------  Change smbiosview display OUTLINE info\r\n"
1008 "       :2 --------  Change smbiosview display NORMAL info\r\n"
1009 "       :3 --------  Change smbiosview display DETAIL info\r\n"
1010 "       /? --------  Show help\r\n"
1011 ".SH RETURNVALUES\r\n"
1012 " \r\n"
1013 "RETURN VALUES:\r\n"
1014 "  SHELL_SUCCESS        Data was displayed as requested.\r\n"
1015 "  SHELL_DEVICE_ERROR   The requested structure was not found.\r\n"
1016
1017 #string STR_GET_HELP_DMPSTORE     #language en-US ""
1018 ".TH dmpstore 0 "Manages all UEFI variables."\r\n"
1019 ".SH NAME\r\n"
1020 "Manages all UEFI variables.\r\n"
1021 ".SH SYNOPSIS\r\n"
1022 " \r\n"
1023 "DMPSTORE [-b] [-d] [-all | ([variable] [-guid guid])] [-sfo]\r\n"
1024 "DMPSTORE [-all | ([variable] [-guid guid])] [-s file]\r\n"
1025 "DMPSTORE [-all | ([variable] [-guid guid])] [-l file]\r\n"
1026 ".SH OPTIONS\r\n"
1027 " \r\n"
1028 "  -b       - Displays one screen at a time.\r\n"
1029 "  -guid    - Specifies the GUID of the variables to be displayed in\r\n"
1030 "             standard text format. If not specified and -all is not\r\n"
1031 "             specified, the EFI_GLOBAL_VARIABLE GUID is assumed.\r\n"
1032 "  -sfo     - Displays information as described in Standard-Format Output.\r\n"
1033 "  -all     - Dumps all variables, including those\r\n"
1034 "             with a different GUID than EFI_GLOBAL_VARIABLE.\r\n"
1035 "  -d       - Delete variables.\r\n"
1036 "  -s       - Saves variables to a file.\r\n"
1037 "  -l       - Loads and sets variables from a file.\r\n"
1038 "  variable - Specifies a variable name. This can be a literal name or\r\n"
1039 "             a pattern as specified in the MetaiMatch() function of the\r\n"
1040 "             EFI_UNICODE_COLLATION2_PROCOOL.\r\n"
1041 ".SH DESCRIPTION\r\n"
1042 " \r\n"
1043 "NOTES:\r\n"
1044 "  1. This command manages the UEFI variables. The variables\r\n"
1045 "     displayed or deleted depend on the command line options, as specified in\r\n"
1046 "     the following table:\r\n"
1047 "     Variable GUID  -all  Description\r\n"
1048 "     ---      ---   ---   All variables with the GUID EFI_GLOBAL_VARIABLE will\r\n"
1049 "                          be operated on.\r\n"
1050 "     ---      ---    X    All variables (regardless of GUID or name) will be\r\n"
1051 "                          operated on.\r\n"
1052 "     ---       X    ---   All variables with the specified GUID will be\r\n"
1053 "                          operated on.\r\n"
1054 "      X       ---   ---   The variable with the GUID EFI_GLOBAL_VARIABLE and\r\n"
1055 "                          the name Variable will be operated on.\r\n"
1056 "      X        X    ---   The variable with the specified GUID and name\r\n"
1057 "                          Variable will be operated on.\r\n"
1058 "  2. The variable value is printed as a hexadecimal dump.\r\n"
1059 "  3. Option -d is used to delete variables. Option -s and -l are used to save\r\n"
1060 "     and load variables to and from a file. The variable name can be specified\r\n"
1061 "     when using these flags so that the operation only takes effect on\r\n"
1062 "     that variable.\r\n"
1063 ".SH EXAMPLES\r\n"
1064 " \r\n"
1065 "EXAMPLES:\r\n"
1066 "  * To dump all variables with the GUID EFI_GLOBAL_VARIABLE:\r\n"
1067 "    Shell> dmpstore\r\n"
1068 " \r\n"
1069 "  * To dump all variables (regardless of GUID or name):\r\n"
1070 "    Shell> dmpstore -all\r\n"
1071 " \r\n"
1072 "  * To dump the 'path' variable with the GUID '158DEF5A-F656-419C-B027-\r\n"
1073 "    7A3192C079D2':\r\n"
1074 "    Shell> dmpstore path -guid 158DEF5A-F656-419C-B027-7A3192C079D2\r\n"
1075 " \r\n"
1076 "  * To save all variables (regardless of GUID or name) to a file 'VarDump.txt':\r\n"
1077 "    fs0:\> dmpstore -all -s VarDump.txt\r\n"
1078 " \r\n"
1079 "  * To delete the 'BootOrder' variable with the GUID EFI_GLOBAL_VARIABLE:\r\n"
1080 "    Shell> dmpstore -d BootOrder\r\n"
1081 ".SH RETURNVALUES\r\n"
1082 " \r\n"
1083 "RETURN VALUES:\r\n"
1084 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
1085 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
1086 "                            formatted or its value was out of bounds.\r\n"
1087
1088 #string STR_GET_HELP_DBLK         #language en-US ""
1089 ".TH dblk 0 "Displays one or more blocks from a block device."\r\n"
1090 ".SH NAME\r\n"
1091 "Displays one or more blocks from a block device.\r\n"
1092 ".SH SYNOPSIS\r\n"
1093 " \r\n"
1094 "DBLK device [lba] [blocks] [-b]\r\n"
1095 ".SH OPTIONS\r\n"
1096 " \r\n"
1097 "  -b     - Displays one screen at a time.\r\n"
1098 "  device - Blocks the device name.\r\n"
1099 "  lba    - Specifies the index of the first block to be displayed (a hexadecimal number).\r\n"
1100 "           The default is 0.\r\n"
1101 "  blocks - Specifies the number of blocks to display (a hexadecimal number). The default\r\n"
1102 "           is 1. If larger than 0x10, then only 0x10 are displayed.\r\n"
1103 ".SH DESCRIPTION\r\n"
1104 " \r\n"
1105 "NOTES:\r\n"
1106 "  1. This command displays the contents of one or more blocks from a block\r\n"
1107 "     device. Enter a hexidecimal value for the lba and blocks variables.  If lba is not\r\n"
1108 "     specified, block #0 is assumed. If blocks is not specified, on1y one\r\n"
1109 "     block is displayed. The maximum number of blocks that can be\r\n"
1110 "     displayed at one time is 0x10.\r\n"
1111 "  2. If an MBR is found on the block, the partition information is displayed\r\n"
1112 "     after all the block contents are displayed.\r\n"
1113 "  3. If the block is a FAT partition, some FAT parameters are displayed\r\n"
1114 "     (label, systemid, oemid, sectorsize, clustersize, media, and so forth) after all the\r\n"
1115 "     blocks are displayed.\r\n"
1116 ".SH EXAMPLES\r\n"
1117 " \r\n"
1118 "EXAMPLES:\r\n"
1119 "  * To display one block of blk0, beginning from block 0:\r\n"
1120 "    Shell> dblk blk0\r\n"
1121 " \r\n"
1122 "  * To display one block of fs0, beginning from block 0x2:\r\n"
1123 "    Shell> dblk fs0 2\r\n"
1124 " \r\n"
1125 "  * To display 0x5 blocks of fs0, beginning from block 0x12:\r\n"
1126 "    Shell> dblk fs0 12 5\r\n"
1127 " \r\n"
1128 "  * To display 0x10 blocks of fs0, beginning from block 0x12:\r\n"
1129 "    Shell> dblk fs0 12 10\r\n"
1130 " \r\n"
1131 "  * To attempt to display more than 0x10 blocks, resulting in only 0x10\r\n"
1132 "    blocks being displayed:\r\n"
1133 "    Shell> dblk fs0 12 20\r\n"
1134 " \r\n"
1135 "  * To display one block of blk2, beginning from the first block (blk0):\r\n"
1136 "    fs1:\tmps1> dblk blk2 0 1\r\n"
1137 " \r\n"
1138
1139 #string STR_GET_HELP_EDIT         #language en-US ""
1140 ".TH edit 0 "Provides a full screen text editor for ASCII or UCS-2 files."\r\n"
1141 ".SH NAME\r\n"
1142 "Provides a full screen text editor for ASCII or UCS-2 files.\r\n"
1143 ".SH SYNOPSIS\r\n"
1144 " \r\n"
1145 "EDIT [file]\r\n"
1146 ".SH OPTIONS\r\n"
1147 " \r\n"
1148 "  file - Specifies the name of file to be edited. If none is specified, an empty file\r\n"
1149 "         is created with a default file name.\r\n"
1150 ".SH DESCRIPTION\r\n"
1151 " \r\n"
1152 "NOTES:\r\n"
1153 "  1. This command enables full screen file editing.\r\n"
1154 "  2. The editor supports both UCS-2 and ASCII file types.\r\n"
1155 ".SH EXAMPLES\r\n"
1156 " \r\n"
1157 "EXAMPLES:\r\n"
1158 "  * To edit the 'shell.log' file:\r\n"
1159 "    fs0:\> edit shell.log\r\n"
1160
1161 #string STR_GET_HELP_HEXEDIT      #language en-US ""
1162 ".TH hexedit 0 "Provides a full screen hex editor for files, block devices, or memory."\r\n"
1163 ".SH NAME\r\n"
1164 "Provides a full screen hex editor for files, block devices, or memory.\r\n"
1165 ".SH SYNOPSIS\r\n"
1166 " \r\n"
1167 "HEXEDIT [[-f] filename| [-d diskname offset size] | [-m address size]]\r\n"
1168 ".SH OPTIONS\r\n"
1169 " \r\n"
1170 "  -f - Specifies the name of the file to edit.\r\n"
1171 "  -d - Specifies the disk block to edit:\r\n"
1172 "         DiskName - Name of the disk to edit (for example fs0)\r\n"
1173 "         Offset   - Starting block number (beginning from 0)\r\n"
1174 "         Size     - Number of blocks to edit\r\n"
1175 "  -m - Specifies the memory region to edit:\r\n"
1176 "         Address  - Starting 32-bit memory address (beginning from 0)\r\n"
1177 "         Size     - Size of memory region to edit in bytes\r\n"
1178 ".SH DESCRIPTION\r\n"
1179 " \r\n"
1180 "NOTES:\r\n"
1181 "  1. This command enables you to edit a file, block device, or memory region.\r\n"
1182 "  2. The region being edited is displayed as hexadecimal bytes. The\r\n"
1183 "     contents can be modified and saved.\r\n"
1184 ".SH EXAMPLES\r\n"
1185 " \r\n"
1186 "EXAMPLES:\r\n"
1187 "  * To edit a file in hex mode:\r\n"
1188 "    fs0:\> hexedit test.bin\r\n"
1189 " \r\n"
1190 "  * To edit block device fs0 starting at block 0 with size of 2 blocks:\r\n"
1191 "    fs0:\> hexedit -d fs0 0 2\r\n"
1192 " \r\n"
1193 "  * To edit memory region starting at address 0x00000000 with size of 2 bytes:\r\n"
1194 "    fs0:\> hexedit -m 0 2\r\n"
1195