ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.uni

   1 // /**
   2 //
   3 // (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P.<BR>
   4 // Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>
   5 // This program and the accompanying materials
   6 // are licensed and made available under the terms and conditions of the BSD License
   7 // which accompanies this distribution. The full text of the license may be found at
   8 // http://opensource.org/licenses/bsd-license.php
   9 //
  10 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 //
  13 // Module Name:
  14 //
  15 // UefiShellLevel2CommandsLib.uni
  16 //
  17 // Abstract:
  18 //
  19 // String definitions for UEFI Shell 2.0 level 2 commands
  20 //
  21 //
  22 // **/
  23
  24 /=#
  25
  26 #langdef   en-US "english"
  27
  28 #string STR_GEN_NO_MEM            #language en-US "%H%s%N: Memory is not available.\r\n"
  29 #string STR_GEN_TOO_MANY          #language en-US "%H%s%N: Too many arguments.\r\n"
  30 #string STR_GEN_TOO_FEW           #language en-US "%H%s%N: Too few arguments.\r\n"
  31 #string STR_GEN_PARAM_INV         #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n"
  32 #string STR_GEN_PROBLEM           #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n"
  33 #string STR_GEN_PROBLEM_VAL       #language en-US "%H%s%N: Bad value - '%H%s%N' for flag - '%H%s%N'\r\n"
  34 #string STR_GEN_ATTRIBUTE         #language en-US "%H%s%N: Invalid argument - '%H-a%s%N'\r\n"
  35 #string STR_GEN_NO_VALUE          #language en-US "%H%s%N: Missing argument for flag - '%H%s%N'\r\n"
  36 #string STR_GEN_ERR_AD            #language en-US "%H%s%N: Access denied.\r\n"
  37 #string STR_GEN_ERR_FILE          #language en-US "%H%s%N: File '%H%s%N' error - %r\r\n"
  38 #string STR_GEN_ERR_UK            #language en-US "%H%s%N: Status: %r\r\n"
  39 #string STR_GEN_PARAM_CON         #language en-US "%H%s%N: Parameters conflict.\r\n"
  40 #string STR_GEN_PARAM_CONFLICT    #language en-US "%H%s%N: Flags conflict with - '%H%s%N' and '%H%s%N'\r\n"
  41 #string STR_GEN_FILE_OPEN_FAIL    #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n"
  42 #string STR_GEN_FILE_CLOSE_FAIL   #language en-US "%H%s%N: Cannot close file - '%H%s%N'\r\n"
  43 #string STR_GEN_FILE_AD           #language en-US "%H%s%N: File access error - '%H%s%N'\r\n"
  44 #string STR_GEN_FILE_NF           #language en-US "%H%s%N: File not found - '%H%s%N'\r\n"
  45 #string STR_GEN_CRLF              #language en-US "\r\n"
  46 #string STR_GEN_NO_CWD            #language en-US "%H%s%N: Current directory not specified.\r\n"
  47 #string STR_GEN_NO_FILES          #language en-US "%H%s%N: No matching files were found.\r\n"
  48 #string STR_GEN_DIR_NF            #language en-US "%H%s%N: Directory not found - '%H%s%N'\r\n"
  49 #string STR_GEN_RES_OK            #language en-US "- [ok]\r\n"
  50 #string STR_GEN_NOT_DIR           #language en-US "%H%s%N: '%H%s%N' is not a directory.\r\n"
  51 #string STR_GEN_NOT_FILE          #language en-US "%H%s%N: '%H%s%N' is not a file.\r\n"
  52 #string STR_GEN_SFO_HEADER        #language en-US "ShellCommand,"%s"\r\n"
  53 #string STR_GEN_MARG_ERROR        #language en-US "%H%s%N: The destination '%H%s%N' is ambiguous.\r\n"
  54 #string STR_GEN_FILE_ERROR        #language en-US "%H%s%N: The destination is an existing file '%H%s%N'.\r\n"
  55 #string STR_GEN_UEFI_FUNC_ERROR   #language en-US "%H%s%N: UEFI function '%H%s%N' returned an incorrect value for: %s (%x).\r\n"
  56 #string STR_GEN_UEFI_FUNC_WARN    #language en-US "%H%s%N: UEFI function '%H%s%N' returned: %r\r\n"
  57 #string STR_GEN_DEST_EXIST_OVR    #language en-US "Destination file already exists.  Overwrite? %BY%Nes, %BN%No, %BA%Nll, %BC%Nancel "
  58 #string STR_GEN_CPY_FAIL          #language en-US "%H%s%N: Copy failure: insufficient capacity on destination media.\r\n"
  59 #string STR_GEN_CPY_READ_ERROR    #language en-US "%H%s%N: reading '%B%s%N': IO Error \r\n"
  60 #string STR_GEN_CPY_WRITE_ERROR   #language en-US "%H%s%N: writing '%B%s%N': IO Error \r\n"
  61 #string STR_GEN_OUT_MEM           #language en-US "%H%s%N: Memory allocation was not successful.\r\n"
  62
  63 #string STR_SET_DISP              #language en-US "%V%8s %N= %H%s%N\r\n"
  64 #string STR_SET_NF                #language en-US "%H%s%N: Environment Variable '%H%s%N' not defined.\r\n"
  65 #string STR_SET_ND                #language en-US "%H%s%N: Environment Variable '%H%s%N' could not be deleted.\r\n"
  66 #string STR_SET_ERROR_SET         #language en-US "%H%s%N: Unable to set %H%s%N\r\n"
  67
  68 #string STR_CD_PRINT              #language en-US "%s\r\n"
  69 #string STR_CD_NF                 #language en-US "%H%s%N: No mapping found.\r\n"
  70
  71 #string STR_MAP_NF                #language en-US "%H%s%N: Cannot find mapped device - '%H%s%N'\r\n"
  72 #string STR_MAP_NOF               #language en-US "%H%s%N: No mappable target found - '%H%s%N'\r\n"
  73 #string STR_MAP_SFO_MAPPINGS      #language en-US "Mappings,"%s","%s","%s"\r\n"
  74 #string STR_MAP_HEADER            #language en-US "%EMapping table%N\r\n"
  75 #string STR_MAP_ENTRY             #language en-US "%E%10s%N %HAlias(s):%N%s\r\n          %s\r\n"
  76 #string STR_MAP_ENTRY_VERBOSE     #language en-US "         Handle:      [%H%02x%N]\r\n"
  77                                                   "         Media Type:  %s\r\n"
  78                                                   "         Removable:   %s\r\n"
  79                                                   "         Current Dir: %s\r\n"
  80
  81 #string STR_ATTRIB_OUTPUT_LINE    #language en-US "Attrib: %1c%1c%1c%1c%1c %s\r\n"
  82
  83 #string STR_MAP_MEDIA_FLOPPY      #language en-US "Floppy"
  84 #string STR_MAP_MEDIA_UNKNOWN     #language en-US "Unknown"
  85 #string STR_MAP_MEDIA_HARDDISK    #language en-US "HardDisk"
  86 #string STR_MAP_MEDIA_CDROM       #language en-US "CD-Rom"
  87
  88 #string STR_MKDIR_ALREADY         #language en-US "Directory '%B%s%N' already exists.\r\n"
  89 #string STR_MKDIR_CREATEFAIL      #language en-US "Directory '%B%s%N' unable to create.\r\n"
  90
  91 #string STR_DATE_FORMAT           #language en-US "%02d/%02d/%04d\r\n"
  92 #string STR_DATE_SFO_FORMAT       #language en-US "Date,"%02d","%02d","%04d"\r\n"
  93
  94 #string STR_TIME_FORMAT           #language en-US "%02d:%02d:%02d (UTC%1s%02d:%02d)"
  95 #string STR_TIME_FORMAT_LOCAL     #language en-US "%02d:%02d:%02d (LOCAL)"
  96 #string STR_TIME_DST0             #language en-US " DST: Not Affected\r\n"
  97 #string STR_TIME_DST1             #language en-US " DST: Affected\r\n"
  98 #string STR_TIME_DST2             #language en-US " DST: Adjusted\r\n"
  99 #string STR_TIME_DST3             #language en-US " DST: Affected and Adjusted\r\n"
 100
 101 #string STR_TIMEZONE_M12          #language en-US "UTC-12:00, International Date Line West\r\n"
 102 #string STR_TIMEZONE_M11          #language en-US "UTC-11:00, Midway Island, Samoa\r\n"
 103 #string STR_TIMEZONE_M10          #language en-US "UTC-10:00, Hawaii\r\n"
 104 #string STR_TIMEZONE_M9           #language en-US "UTC-09:00, Alaska\r\n"
 105 #string STR_TIMEZONE_M8           #language en-US "UTC-08:00, Pacific Time(US & Canada), Tijuana, Portland\r\n"
 106 #string STR_TIMEZONE_M7           #language en-US "UTC-07:00, Arizona, Chihuahua, La Paz, Mazatlan, Mountain Time (US & Canada)\r\n"
 107 #string STR_TIMEZONE_M6           #language en-US "UTC-06:00, Central America, Central Time(US & Canada)\r\n"
 108 #string STR_TIMEZONE_M5           #language en-US "UTC-05:00, Bogota, Lima, Quito, Eastern Time(US & Canada)\r\n"
 109 #string STR_TIMEZONE_M430         #language en-US "UTC-04:30, Caracas\r\n"
 110 #string STR_TIMEZONE_M4           #language en-US "UTC-04:00, Atlantic Time(Canada), Caracas, Santiago\r\n"
 111 #string STR_TIMEZONE_M330         #language en-US "UTC-03:30, Newfoundland\r\n"
 112 #string STR_TIMEZONE_M3           #language en-US "UTC-03:00, Brasilia, Buenos Aires, Georgetown, Greenland\r\n"
 113 #string STR_TIMEZONE_M2           #language en-US "UTC-02:00, Mid-Atlantic\r\n"
 114 #string STR_TIMEZONE_M1           #language en-US "UTC-01:00, Azores, Cape Verde Is.\r\n"
 115 #string STR_TIMEZONE_0            #language en-US "UTC      , Greenwich Mean Time, Casablanca, Monrovia, Dublin, London\r\n"
 116 #string STR_TIMEZONE_P1           #language en-US "UTC+01:00, Amsterdam, Berlin, Bern, Rome, Paris, West Central Africa\r\n"
 117 #string STR_TIMEZONE_P2           #language en-US "UTC+02:00, Athens, Istanbul, Bucharest, Cairo, Jerusalem\r\n"
 118 #string STR_TIMEZONE_P3           #language en-US "UTC+03:00, Baghdad, Kuwait, Riyadh, Moscow, Nairobi\r\n"
 119 #string STR_TIMEZONE_P330         #language en-US "UTC+03:30, Tehran\r\n"
 120 #string STR_TIMEZONE_P4           #language en-US "UTC+04:00, Abu Dhabi, Muscat, Baku, Tbilisi, Yerevan\r\n"
 121 #string STR_TIMEZONE_P430         #language en-US "UTC+04:30, Kabul\r\n"
 122 #string STR_TIMEZONE_P5           #language en-US "UTC+05:00, Ekaterinburg, Islamabad, Karachi, Tashkent\r\n"
 123 #string STR_TIMEZONE_P530         #language en-US "UTC+05:30, Chennai, Kolkata, Mumbai, New Delhi\r\n"
 124 #string STR_TIMEZONE_P545         #language en-US "UTC+05:45, Kathmandu\r\n"
 125 #string STR_TIMEZONE_P6           #language en-US "UTC+06:00, Almaty, Novosibirsk, Astana, Dhaka, Sri Jayawardenepura\r\n"
 126 #string STR_TIMEZONE_P630         #language en-US "UTC+06:30, Rangoon\r\n"
 127 #string STR_TIMEZONE_P7           #language en-US "UTC+07:00, Bangkok, Hanio, Jakarta, Krasnoyarsk\r\n"
 128 #string STR_TIMEZONE_P8           #language en-US "UTC+08:00, Beijing, Chongqing, Hong Kong, Urumqi, Taipei, Perth\r\n"
 129 #string STR_TIMEZONE_P9           #language en-US "UTC+09:00, Osaka, Sapporo, Tokyo, Seoul, Yakutsk\r\n"
 130 #string STR_TIMEZONE_P930         #language en-US "UTC+09:30, Adelaide, Darwin\r\n"
 131 #string STR_TIMEZONE_P10          #language en-US "UTC+10:00, Canberra, Melbourne, Sydney, Guam, Hobart, Vladivostok\r\n"
 132 #string STR_TIMEZONE_P11          #language en-US "UTC+11:00, Magadan, Solomon Is., New Caledonia\r\n"
 133 #string STR_TIMEZONE_P12          #language en-US "UTC+12:00, Auckland, Wellington, Fiji, Kamchatka, Marshall Is.\r\n"
 134 #string STR_TIMEZONE_P13          #language en-US "UTC+13:00, Nuku'alofa\r\n"
 135 #string STR_TIMEZONE_P14          #language en-US "UTC+14:00, Line Islands\r\n"
 136 #string STR_TIMEZONE_LOCAL        #language en-US "LOCAL    , Local Time\r\n"
 137 #string STR_TIMEZONE_SIMPLE       #language en-US "UTC%1s%02d:%02d\r\n"
 138 #string STR_TIMEZONE_SIMPLE_LOCAL #language en-US "LOCAL\r\n"
 139 #string STR_TIMEZONE_NI           #language en-US "No additional information known."
 140
 141 #string STR_LOAD_NOT_IMAGE        #language en-US "Image '%s' is not an image.\r\n"
 142 #string STR_LOAD_NOT_DRIVER       #language en-US "Image '%s' is not a driver.\r\n"
 143 #string STR_LOAD_LOADED           #language en-US "Image '%s' loaded at %x - %r\r\n"
 144 #string STR_LOAD_ERROR            #language en-US "Image '%s' error in StartImage: %r\r\n"
 145
 146 #string STR_LS_LINE_START_ALL     #language en-US "%t %5s %1c % ,L11d  "
 147 #string STR_LS_LINE_END_FILE      #language en-US "%s\r\n"
 148 #string STR_LS_LINE_END_EXE       #language en-US "%V%s%N\r\n"
 149 #string STR_LS_LINE_END_DIR       #language en-US "%B%s%N\r\n"
 150 #string STR_LS_FOOTER_LINE        #language en-US "% ,L11d File(s) % ,L11d bytes\r\n% ,L11d Dir(s)\r\n"
 151 #string STR_LS_HEADER_LINE1       #language en-US "Directory of: %H%s%N\r\n"
 152 #string STR_LS_FILE_NOT_FOUND     #language en-US "%H%s%N: File Not Found - '%H%s%N'\r\n"
 153 #string STR_LS_SFO_VOLINFO        #language en-US "VolumeInfo,"%s","%Ld","%5s","%Ld","%Ld"\r\n"
 154 #string STR_LS_SFO_FILEINFO       #language en-US "FileInfo,"%s","%Ld","%Ld","%s%s%s%s%s","%02d:%02d:%02d","%02d.%02d.%04d","%02d:%02d:%02d","%02d.%02d.%04d","%02d:%02d:%02d","%02d.%02d.%04d"\r\n"
 155
 156 #string STR_VOL_VOLINFO           #language en-US "Volume %s (%s)\r\n"
 157                                                   "%Ld bytes total disk space\r\n"
 158                                                   "%Ld bytes available on disk\r\n"
 159                                                   "%d bytes in each allocation unit\r\n"
 160
 161 #string STR_RM_LOG_DELETE_CONF    #language en-US "Remove Subtree '%B%s%N' [y/n]?"
 162 #string STR_RM_LOG_DELETE         #language en-US "Deleting '%B%s%N'\r\n"
 163 #string STR_RM_LOG_DELETE_ERR     #language en-US "Delete error: %r\r\n"
 164 #string STR_RM_LOG_DELETE_ERR2    #language en-US "Delete error.  Couldn't open file: %r\r\n"
 165 #string STR_RM_LOG_DELETE_ERR3    #language en-US "Delete error.  Invalid target '%B%s%N'\r\n"
 166 #string STR_RM_LOG_DELETE_COMP    #language en-US "Delete successful.\r\n"
 167 #string STR_RM_LOG_DETELE_RO      #language en-US "%H%s%N: '%H%s%N' is read-only\r\n"
 168
 169 #string STR_MV_OUTPUT             #language en-US "Moving %s -> %s\r\n"
 170 #string STR_MV_INV_SUB            #language en-US "Cannot move a directory into itself or its subdirectory.\r\n"
 171 #string STR_MV_INV_RO             #language en-US "Cannot move to or from a read-only file or directory '%B%s%N'\r\n"
 172 #string STR_MV_INV_CWD            #language en-US "Cannot move current working directory or its subdirectory.\r\n"
 173
 174 #string STR_CP_OUTPUT             #language en-US "Copying %s -> %s\r\n"
 175 #string STR_CP_ERROR              #language en-US "%H%s%N: Could not copy - '%H%s%N'\r\n"
 176 #string STR_CP_DIR_REQ            #language en-US "%H%s%N: Copying a directory requires -r.\r\n"
 177 #string STR_CP_DIR_WNF            #language en-US "%H%s%N: The specified path does not exist - '%H%s%N'\r\n"
 178 #string STR_CP_SD_SAME            #language en-US "%H%s%N: The source and destination are the same.\r\n"
 179 #string STR_CP_SD_PARENT          #language en-US "%H%s%N: The destination is a parent of the source.\r\n"
 180 #string STR_CP_DEST_ERROR         #language en-US "%H%s%N: The destination is read-only.\r\n"
 181 #string STR_CP_DEST_OPEN_FAIL     #language en-US "%H%s%N: The destination file '%B%s%N' failed to open with create.\r\n"
 182 #string STR_CP_DEST_DIR_FAIL      #language en-US "%H%s%N: The destination directory '%B%s%N' could not be created.\r\n"
 183 #string STR_CP_SRC_OPEN_FAIL     #language en-US "%H%s%N: The source file '%B%s%N' failed to open with read.\r\n"
 184
 185 #string STR_GET_HELP_ATTRIB       #language en-US ""
 186 ".TH attrib 0 "Displays or modifies the attributes of files or directories."\r\n"
 187 ".SH NAME\r\n"
 188 "Displays or modifies the attributes of files or directories.\r\n"
 189 ".SH SYNOPSIS\r\n"
 190 " \r\n"
 191 "ATTRIB [+a|-a] [+s|-s] [+h|-h] [+r|-r] [file...] [directory...]\r\n"
 192 ".SH OPTIONS\r\n"
 193 " \r\n"
 194 "  +a|-a     - Sets or clears the 'archive' attribute.\r\n"
 195 "  +s|-s     - Sets or clears the 'system' attribute.\r\n"
 196 "  +h|-h     - Sets or clears the 'hidden' attribute.\r\n"
 197 "  +r|-r     - Sets or clears the 'read-only' attribute.\r\n"
 198 "  file      - Specifies the file name (wild cards are permitted).\r\n"
 199 "  directory - Specifies the directory name (wildcards are permitted).\r\n"
 200 ".SH DESCRIPTION\r\n"
 201 " \r\n"
 202 "NOTES:\r\n"
 203 "  1. Four attribute types are supported in the UEFI file system:\r\n"
 204 "     - Archive [A]\r\n"
 205 "     - System [S]\r\n"
 206 "     - Hidden [H]\r\n"
 207 "     - Read only [R]\r\n"
 208 "  2. If a file (in general meaning) is a directory, then it is also shown\r\n"
 209 "     to have the attribute [D].\r\n"
 210 "  3. If any file in the file list that is specified \r\n"
 211 "     does not exist, attrib will continue processing the remaining files\r\n"
 212 "     while reporting the error.\r\n"
 213 "  4. If no attributes parameters are specified, the current attributes of\r\n"
 214 "     the specified files or directories are displayed.\r\n"
 215 "  5. If no files or directories are specified, the command applies to\r\n"
 216 "     all files and sub-directories within the current directory.\r\n"
 217 ".SH EXAMPLES\r\n"
 218 " \r\n"
 219 "EXAMPLES:\r\n"
 220 "  * To display the attributes of a directory:\r\n"
 221 "    fs0:\> attrib fs0:\ \r\n"
 222 " \r\n"
 223 "  * To display the attributes of all files and sub-directories in the current\r\n"
 224 "    directory:\r\n"
 225 "    fs0:\> attrib *\r\n"
 226 " \r\n"
 227 "  * To add the system attribute to all files with extension '.efi':\r\n"
 228 "    fs0:\> attrib +s *.efi\r\n"
 229 " \r\n"
 230 "  * To remove the read-only attribute from all files with extension '.inf':\r\n"
 231 "    fs0:\> attrib -r *.inf\r\n"
 232 ".SH RETURNVALUES\r\n"
 233 " \r\n"
 234 "RETURN VALUES:\r\n"
 235 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 236 "  SHELL_NOT_FOUND           The requested file was not found.\r\n"
 237 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
 238 "                            formatted or its value was out of bounds.\r\n"
 239 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 240 "                            violation.\r\n"
 241 "  SHELL_WRITE_PROTECTED     The media that the action was to take place on is\r\n"
 242 "                            write-protected.\r\n"
 243
 244 #string STR_GET_HELP_CD           #language en-US ""
 245 ".TH cd 0 "Displays or changes the current directory."\r\n"
 246 ".SH NAME\r\n"
 247 "Displays or changes the current directory.\r\n"
 248 ".SH SYNOPSIS\r\n"
 249 " \r\n"
 250 "CD [path]\r\n"
 251 ".SH OPTIONS\r\n"
 252 " \r\n"
 253 "  path - Specifies the relative or absolute directory path.\r\n"
 254 ".SH DESCRIPTION\r\n"
 255 " \r\n"
 256 "NOTES:\r\n"
 257 "  1. This command changes the current working directory that is used by the\r\n"
 258 "     UEFI Shell environment. If a file system mapping is specified, then the\r\n"
 259 "     current working directory is changed for that device. Otherwise, the\r\n"
 260 "     current working directory is changed for the current device.\r\n"
 261 "  2. If path is not present, then the current working directory (including\r\n"
 262 "     file system mapping) is displayed to standard out.\r\n"
 263 "  3. The table below describes the conventions that are used to refer to the\r\n"
 264 "     directory, its parent, and the root directory in the UEFI Shell\r\n"
 265 "     environment.\r\n"
 266 "     Convention  Description\r\n"
 267 "      '.'        Refers to the current directory.\r\n"
 268 "      '..'       Refers to the directory's parent.\r\n"
 269 "      '\\\'        Refers to the root of the current file system.\r\n"
 270 "  4. The current working directory is maintained in the environment\r\n"
 271 "     variable %cwd%.\r\n"
 272 ".SH EXAMPLES\r\n"
 273 " \r\n"
 274 "EXAMPLES:\r\n"
 275 "  * To change the current file system to the mapped fs0 file system:\r\n"
 276 "    Shell> fs0:\r\n"
 277 " \r\n"
 278 "  * To change the current directory to subdirectory 'efi':\r\n"
 279 "    fs0:\> cd efi\r\n"
 280 " \r\n"
 281 "  * To change the current directory to the parent directory (fs0:\):\r\n"
 282 "    fs0:\efi\> cd ..\r\n"
 283 " \r\n"
 284 "  * To change the current directory to 'fs0:\efi\Tools':\r\n"
 285 "    fs0:\> cd efi\Tools\r\n"
 286 " \r\n"
 287 "  * To change the current directory to the root of the current fs (fs0):\r\n"
 288 "    fs0:\efi\Tools\> cd \ \r\n"
 289 " \r\n"
 290 "  * To move between volumes and maintain the current path, and then copy\r\n"
 291 "    all of files in fs0:\efi\Tools into the fs1:\Tmp directory:\r\n"
 292 "    fs0:\> cd \efi\Tools\r\n"
 293 "    fs0:\efi\Tools\> fs1:\r\n"
 294 "    fs1:\> cd Tmp\r\n"
 295 ".SH RETURNVALUES\r\n"
 296 " \r\n"
 297 "RETURN VALUES:\r\n"
 298 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 299 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 300 "                            violation.\r\n"
 301 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
 302 "                            formatted or its value was out of bounds.\r\n"
 303
 304 #string STR_GET_HELP_CP           #language en-US ""
 305 ".TH cp 0 "Copies files or directories."\r\n"
 306 ".SH NAME\r\n"
 307 "Copies one or more files or directories to another location.\r\n"
 308 ".SH SYNOPSIS\r\n"
 309 " \r\n"
 310 "CP [-r] [-q] src [src...] [dst]\r\n"
 311 ".SH OPTIONS\r\n"
 312 " \r\n"
 313 "  -r  - Makes a recursive copy.\r\n"
 314 "  -q  - Makes a quiet copy (without a prompt).\r\n"
 315 "  src - Specifies a source file/directory name (wildcards are permitted).\r\n"
 316 "  dst - Specifies a destination file/directory name (wildcards are not permitted). \r\n"
 317 "        If more than one directory is specified, the last directory is\r\n"
 318 "        assumed to be the destination.\r\n"
 319 ".SH DESCRIPTION\r\n"
 320 " \r\n"
 321 "NOTES:\r\n"
 322 "  1. '-r' must be specified if src is a directory. If '-r' is specified,\r\n"
 323 "     the source directory is recursively copied to the destination.\r\n"
 324 "     'src' itself is copied.\r\n"
 325 "  2. If a destination is not specified, the current working directory is\r\n"
 326 "     assumed to be the destination.\r\n"
 327 "  3. 'CP -r src1 src2 dst' copies all files and subdirectories in 'src1' and\r\n"
 328 "     'src2' to the destination 'dst'. 'src1' and 'src2' themselves are also\r\n"
 329 "     copied. The 'dst' parameter is interpreted as a directory.\r\n"
 330 "  4. Copying a directory or file to itself is not allowed.\r\n"
 331 "  5. If an error occurs, this command exits immediately and the remaining files or\r\n"
 332 "     directories are not copied.\r\n"
 333 "  6. When 'cp' is executed with a script file, it always performs quiet\r\n"
 334 "     copying, regardless of whether the '-q' option is specified.\r\n"
 335 "  7. If you are copying multiple files, the destination must be an existing\r\n"
 336 "     directory.\r\n"
 337 ".SH EXAMPLES\r\n"
 338 " \r\n"
 339 "EXAMPLES:\r\n"
 340 "  * To display the contents of the current directory:\r\n"
 341 "    fs0:\> ls\r\n"
 342 " \r\n"
 343 "  * To copy a file in the same directory and change the file name:\r\n"
 344 "    fs0:\> cp temp.txt readme.txt\r\n"
 345 " \r\n"
 346 "  * To copy multiple files to another directory:\r\n"
 347 "    fs0:\> cp temp.txt isaBus.efi \Test\r\n"
 348 " \r\n"
 349 "  * To copy multiple directories recursively to another directory:\r\n"
 350 "    fs0:\> cp -r test1 test2 boot \Test\r\n"
 351 " \r\n"
 352 "  * To see the results of the above operations:\r\n"
 353 "    fs0:\> ls \Test\r\n"
 354 ".SH RETURNVALUES\r\n"
 355 " \r\n"
 356 "RETURN VALUES:\r\n"
 357 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 358 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly \r\n"
 359 "                            formatted or its value was out of bounds.\r\n"
 360 "  SHELL_OUT_OF_RESOURCES    There was insufficient space to save the \r\n"
 361 "                            requested file at the destination.\r\n"
 362 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security \r\n"
 363 "                            violation.\r\n"
 364 "  SHELL_WRITE_PROTECTED     An attempt was made to create a file on media that\r\n"
 365 "                            was write-protected.\r\n"
 366
 367 #string STR_GET_HELP_MAP          #language en-US ""
 368 ".TH map 0 "Displays or defines file system mappings"\r\n"
 369 ".SH NAME\r\n"
 370 "Displays or defines file system mappings.\r\n"
 371 ".SH SYNOPSIS\r\n"
 372 " \r\n"
 373 "MAP [-d <sname>]\r\n"
 374 "MAP [[-r][-v][-c][-f][-u][-t <type[,type...]>][sname]]\r\n"
 375 "MAP [sname handle | mapping]\r\n"
 376 ".SH OPTIONS\r\n"
 377 " \r\n"
 378 "  -d      - Deletes a file system mapping.\r\n"
 379 "  -r      - Resets file system mappings to default values.\r\n"
 380 "  -u      - Adds file system mappings for newly-installed devices and\r\n"
 381 "            removes mappings for uninstalled devices. This does not change\r\n"
 382 "            the mappings of existing devices and preserves user-defined mappings.\r\n"
 383 "  -v      - Displays verbose information about all file system mappings.\r\n"
 384 "  -c      - Displays the consistent mappings.\r\n"
 385 "  -f      - Displays the normal mappings (not the consistent mappings).\r\n"
 386 "  -t      - Displays the device mappings, filtered according to the device type.\r\n"
 387 "            Supported types are:\r\n"
 388 "              fp - Floppy\r\n"
 389 "              hd - Hard Disk\r\n"
 390 "              cd - CD-ROM\r\n"
 391 "            Types can be combined by putting a comma between two types. Spaces\r\n"
 392 "            are not allowed between types.\r\n"
 393 "  -sfo    - Displays information in Standard-Format Output.\r\n"
 394 "  sname   - Specifies a mapping name.\r\n"
 395 "  handle  - Specifies the number of a handle. Use the same value that is\r\n"
 396 "            displayed by the 'dh' command.\r\n"
 397 "  mapping - Specifies a new mapping name to assign to a device.\r\n"
 398 "            This value must end with a ':'.\r\n"
 399 ".SH DESCRIPTION\r\n"
 400 " \r\n"
 401 "NOTES:\r\n"
 402 "  1. This command creates a mapping between a user-defined name and a device.\r\n"
 403 "     The most common use of this command is to create a mapped name for\r\n"
 404 "     devices that support a file system protocol. After these mappings are\r\n"
 405 "     created, the names can be used with all the file manipulation commands.\r\n"
 406 "  2. The UEFI Shell environment creates default mappings for all of the\r\n"
 407 "     devices that support a recognized file system.\r\n"
 408 "  3. This command can be used to create additional mappings, or \r\n"
 409 "     when used with the -d option, to delete an existing mapping. If it is\r\n"
 410 "     used without any parameters, all of the current mappings are listed.\r\n"
 411 "     If the -v option is used, the mappings are shown with additional\r\n"
 412 "     information about each device.\r\n"
 413 "  4. The -r option is used to reset all the default mappings in a system,\r\n"
 414 "     which is useful if the system configuration has changed since the\r\n"
 415 "     last boot.\r\n"
 416 "  5. The -u option adds mappings for newly-installed devices and removes\r\n"
 417 "     mappings for uninstalled devices without changing the mappings of\r\n"
 418 "     existing devices. User-defined mappings are also preserved. A mapping\r\n"
 419 "     history is saved, which preserves the original mapping name for\r\n"
 420 "     a device with a specific device path. The current directory is also\r\n"
 421 "     preserved if the current device is not changed.\r\n"
 422 "  6. Each device in the system has a consistent mapping. If the hardware\r\n"
 423 "     configuration has not changed, the device's consistent mappings do not\r\n"
 424 "     change. If two or more machines have the same hardware configurations,\r\n"
 425 "     the device's consistent mapping remains the same. Use the -c option to\r\n"
 426 "     list all the consistent mappings in the system.\r\n"
 427 "  7. The mapping value must consist of digits and characters. Other\r\n"
 428 "     characters are illegal.\r\n"
 429 "  8. This command support wildcards. You can use the wildcards to delete\r\n"
 430 "     or show the mapping. However, when you assign the mapping, wildcards\r\n"
 431 "     are forbidden.\r\n"
 432 ".SH EXAMPLES\r\n"
 433 " \r\n"
 434 "EXAMPLES:\r\n"
 435 "  * To display verbose mapping table information:\r\n"
 436 "    Shell> map -v\r\n"
 437 " \r\n"
 438 "  * To assign a different name to fs0:\r\n"
 439 "    Shell> map floppy fs0:\r\n"
 440 " \r\n"
 441 "  * To operate with the mapped name:\r\n"
 442 "    Shell> floppy:\r\n"
 443 " \r\n"
 444 "  * To delete a mapped name:\r\n"
 445 "    Shell> map -d floppy:\r\n"
 446 " \r\n"
 447 "  * To display all the mapped names starting with 'f': \r\n"
 448 "    Shell> map f* \r\n"
 449 ".SH RETURNVALUES\r\n"
 450 " \r\n"
 451 "RETURN VALUES:\r\n"
 452 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 453 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 454 "                            violation.\r\n"
 455 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
 456 "                            formatted or its value was out of bounds.\r\n"
 457
 458 #string STR_GET_HELP_MKDIR        #language en-US ""
 459 ".TH mkdir 0 "Creates directories."\r\n"
 460 ".SH NAME\r\n"
 461 "Creates one or more new directories.\r\n"
 462 ".SH SYNOPSIS\r\n"
 463 " \r\n"
 464 "MKDIR dir [dir...]\r\n"
 465 ".SH OPTIONS\r\n"
 466 " \r\n"
 467 "  dir - Specifies the name of a directory or directories to create. (Wildcards are not\r\n"
 468 "        allowed) \r\n"
 469 ".SH DESCRIPTION\r\n"
 470 " \r\n"
 471 "NOTES:\r\n"
 472 "  1. The parent directory must already exist.\r\n"
 473 "  2. If the directory already exists, mkdir will abort.\r\n"
 474 "  3. Specifying additional directory parameters dependent on previous\r\n"
 475 "     directory parameters is not allowed:\r\n"
 476 "     For example, mkdir new new\Test is not allowed.\r\n"
 477 "  4. Redirecting output to a file that exists under the directory specified\r\n"
 478 "     by this command is not allowed.\r\n"
 479 ".SH EXAMPLES\r\n"
 480 " \r\n"
 481 "EXAMPLES:\r\n"
 482 "  * To create a new directory:\r\n"
 483 "    fs0:\> mkdir rafter\r\n"
 484 " \r\n"
 485 "  * To create multiple directories:\r\n"
 486 "    fs0:\> mkdir temp1 temp2\r\n"
 487 ".SH RETURNVALUES\r\n"
 488 " \r\n"
 489 "RETURN VALUES:\r\n"
 490 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 491 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly \r\n"
 492 "                            formatted or its value was out of bounds.\r\n"
 493 "  SHELL_OUT_OF_RESOURCES    There was insufficient space on the destination \r\n"
 494 "                            to create the requested directory.\r\n"
 495 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security \r\n"
 496 "                            violation.\r\n"
 497 "  SHELL_WRITE_PROTECTED     An attempt was made to create a directory when the\r\n"
 498 "                            target media was write-protected.\r\n"
 499
 500 #string STR_GET_HELP_MV           #language en-US ""
 501 ".TH mv 0 "Moves files."\r\n"
 502 ".SH NAME\r\n"
 503 "Moves one or more files to a destination within or between file systems.\r\n"
 504 ".SH SYNOPSIS\r\n"
 505 " \r\n"
 506 "MV src [src...] [dst]\r\n"
 507 ".SH OPTIONS\r\n"
 508 " \r\n"
 509 "  src - Specifies a source file/directory name (wildcards are permitted).\r\n"
 510 "  dst - Specifies a destination file/directory name (wildcards are permitted).\r\n"
 511 ".SH DESCRIPTION\r\n"
 512 " \r\n"
 513 "NOTES:\r\n"
 514 "  1. This command moves one or more files to a destination within or between\r\n"
 515 "     file systems.\r\n"
 516 "  2. If the destination is an existing directory, the sources are moved\r\n"
 517 "     into that directory. You cannot move the sources to a non-existing\r\n"
 518 "     directory.\r\n"
 519 "  3. If a destination is not specified, the current directory is assumed to be\r\n"
 520 "     the destination. If there is more than one argument on the command line,\r\n"
 521 "     the last one is assumed to be the destination.\r\n"
 522 "  4. Attempting to move a read-only file/directory results in an error.\r\n"
 523 "     Moving a directory that contains read-only files is allowed.\r\n"
 524 "  5. You cannot move a directory into itself or its subdirectories.\r\n"
 525 "  6. You cannot move a directory if the current working directory is itself or\r\n"
 526 "     its subdirectories.\r\n"
 527 "  7. If an error occurs, the remaining files or directories are still be\r\n"
 528 "     moved.\r\n"
 529 ".SH EXAMPLES\r\n"
 530 " \r\n"
 531 "EXAMPLES:\r\n"
 532 "  * To rename a file:\r\n"
 533 "    fs0:\> mv IsaBus.efi Bus.efi\r\n"
 534 " \r\n"
 535 "  * To move a directory to the current directory:\r\n"
 536 "    fs0:\> mkdir Test1\Temp\r\n"
 537 "    fs0:\> mv Test1\Temp\r\n"
 538 " \r\n"
 539 "  * To rename a directory:\r\n"
 540 "    fs0:\> mv efi efi1.1\r\n"
 541 " \r\n"
 542 "  * To move multiple directories at a time:\r\n"
 543 "    fs0:\> mv Test1 Test2 Test\r\n"
 544 " \r\n"
 545 "  * To attempt moving a read-only directory, which results in a failure:\r\n"
 546 "    fs0:\Test> attrib +r Temp1\r\n"
 547 "    DA  R fs0:\Test\Temp1\r\n"
 548 "    fs0:\Test> mv Temp1 Temp2\r\n"
 549 ".SH RETURNVALUES\r\n"
 550 " \r\n"
 551 "RETURN VALUES:\r\n"
 552 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 553 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 554 "                            violation.\r\n"
 555 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
 556 "                            formatted or its value was out of bounds.\r\n"
 557 "  SHELL_NOT_FOUND           The source file was not able to be found.\r\n"
 558 "  SHELL_OUT_OF_RESOURCES    There was insufficient free space to move the\r\n"
 559 "                            requested file to its destination.\r\n"
 560 "  SHELL_WRITE_PROTECTED     An attempt was made to create a file on media that\r\n"
 561 "                            was write-protected.\r\n"
 562
 563 #string STR_GET_HELP_PARSE        #language en-US ""
 564 ".TH parse 0 "Parses standard format output files."\r\n"
 565 ".SH NAME\r\n"
 566 "Retrieves a value from a standard format output file.\r\n"
 567 ".SH SYNOPSIS\r\n"
 568 " \r\n"
 569 "PARSE filename tablename column [-i <Instance>] [-s <Instance>]\r\n"
 570 ".SH OPTIONS\r\n"
 571 " \r\n"
 572 "  filename      - Specifies a source file name.\r\n"
 573 "  tablename     - Specifies the name of the table to be parsed.\r\n"
 574 "  column        - Specifies the one-based column index to use to determine which value\r\n"
 575 "                  from a particular record to parse.\r\n"
 576 "  -i <Instance> - Specifies an instance number to use to start parsing the ShellCommand table,\r\n"
 577 "                  and then the specified tablename. If not specified, all instances are returned.\r\n"
 578 "  -s <Instance> - Specifies an instance number to use to start parsing the ShellCommand\r\n"
 579 "                  table. If not present, then 1 is assumed.\r\n"
 580 ".SH DESCRIPTION\r\n"
 581 " \r\n"
 582 "NOTES:\r\n"
 583 "  1. This command enables you to parse data from a file that has been output\r\n"
 584 "     using the -sfo parameter.\r\n"
 585 "  2. Since the standard formatted output has a well known means of parsing,\r\n"
 586 "     this command is intended to provide an easy way of enabling\r\n"
 587 "     scripts to consume retrieved data from such constructed output files, and\r\n"
 588 "     use it in the logic of scripts written for the UEFI shell.\r\n"
 589 ".SH EXAMPLES\r\n"
 590 " \r\n"
 591 "EXAMPLES:\r\n"
 592 "  * The following data is contained in a temporary file (temp.txt):\r\n"
 593 "    ShellCommand,"ls"\r\n"
 594 "    VolumeInfo,"MikesVolume","400000000","FALSE","32000000","16000000"\r\n"
 595 "    FileInfo,"FS0:\efi\\boot\winloader.efi","45670","45900","arsh","08:30:12","01.08.2013","00:00:00","01.08.2013","08:30:12","01.08.2013"\r\n"
 596 "    FileInfo,"FS0:\efi\\boot\mikesfile.txt","1250","1280","a","08:30:12","01.08.2013","00:00:00","01.08.2013","08:30:12","01.08.2013"\r\n"
 597 "    FileInfo,"FS0:\efi\\boot\\readme.txt","795","900","a","08:30:12","01.08.2013","00:00:00","01.08.2013","08:30:12","01.08.2013"\r\n"
 598 " \r\n"
 599 "  * To display VolumeInfo column 2 in temp.txt:\r\n"
 600 "    fs0:\> parse temp.txt VolumeInfo 2\r\n"
 601 "    MikesVolume\r\n"
 602 " \r\n"
 603 "  * To display FileInfo column 3 in temp.txt, starting with instance 3:\r\n"
 604 "    fs0:\> parse temp.txt FileInfo 3 -i 3\r\n"
 605 "    795\r\n"
 606 ".SH RETURNVALUES\r\n"
 607 " \r\n"
 608 "RETURN VALUES:\r\n"
 609 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 610 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 611 "                            violation.\r\n"
 612 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
 613 "                            formatted or its value was out of bounds.\r\n"
 614 "  SHELL_NOT_FOUND           The source file was not able to be found.\r\n"
 615
 616 #string STR_GET_HELP_RESET        #language en-US ""
 617 ".TH reset 0 "Reset the system."\r\n"
 618 ".SH NAME\r\n"
 619 "Resets the system.\r\n"
 620 ".SH SYNOPSIS\r\n"
 621 " \r\n"
 622 "RESET [-w [string]]\r\n"
 623 "RESET [-s [string]]\r\n"
 624 "RESET [-c [string]]\r\n"
 625 ".SH OPTIONS\r\n"
 626 " \r\n"
 627 "  -s     - Performs a shutdown.\r\n"
 628 "  -w     - Performs a warm boot.\r\n"
 629 "  -c     - Performs a cold boot.\r\n"
 630 "  string - Describes a reason for the reset.\r\n"
 631 ".SH DESCRIPTION\r\n"
 632 " \r\n"
 633 "NOTES:\r\n"
 634 "  1. This command resets the system.\r\n"
 635 "  2. The default is to perform a cold reset unless the -w parameter is\r\n"
 636 "     specified.\r\n"
 637 "  3. If a reset string is specified, it is passed into the Reset() \r\n"
 638 "     function, and the system records the reason for the system reset.\r\n"
 639 ".SH RETURNVALUES\r\n"
 640 " \r\n"
 641 "RETURN VALUES:\r\n"
 642 "  SHELL_INVALID_PARAMETER   One of the passed in parameters was incorrectly \r\n"
 643 "                            formatted or its value was out of bounds.\r\n"
 644
 645 #string STR_GET_HELP_RM           #language en-US ""
 646 ".TH rm 0 "Deletes one or more files or directories."\r\n"
 647 ".SH NAME\r\n"
 648 "Deletes one or more files or directories.\r\n"
 649 ".SH SYNOPSIS\r\n"
 650 " \r\n"
 651 "RM [-q] file/directory [file/directory ...]\r\n"
 652 ".SH OPTIONS\r\n"
 653 " \r\n"
 654 "  -q        - Specifies quiet mode. Does not prompt for a confirmation.\r\n"
 655 "  file      - Specifies a file name (wildcards are permitted).\r\n"
 656 "  directory - Specifies a directory name (wildcards are permitted).\r\n"
 657 ".SH DESCRIPTION\r\n"
 658 " \r\n"
 659 "NOTES:\r\n"
 660 "  1. This command deletes one or more files or directories.\r\n"
 661 "  2. If the target is a directory, it deletes the directory, including all\r\n"
 662 "     its subdirectories.\r\n"
 663 "  3. Redirecting a file whose parent directory (or the file\r\n"
 664 "     itself) is being deleted is not allowed.\r\n"
 665 "  4. Removing a read-only file/directory results in a failure.\r\n"
 666 "  5. Removing a directory containing read-only file(s) results in\r\n"
 667 "     a failure. If an error occurs, the command exits immediately and stops\r\n"
 668 "     removing files/directories.\r\n"
 669 "  6. You cannot remove a directory when the current directory is itself or its\r\n"
 670 "     subdirectory. If a file contains wildcards, you are not prompted for\r\n"
 671 "     confirmation.\r\n"
 672 "  7. The root directory cannot be removed.\r\n"
 673 "  8. The current directory or its ancestor directories cannot be removed.\r\n"
 674 ".SH EXAMPLES\r\n"
 675 " \r\n"
 676 "EXAMPLES:\r\n"
 677 "  * To remove multiple directories at a time:\r\n"
 678 "    fs0:\> rm Test\Temp1 Temp2\r\n"
 679 " \r\n"
 680 "  * To remove multiple directories with wildcards:\r\n"
 681 "    fs0:\> rm Test\Temp*\r\n"
 682 " \r\n"
 683 "  * To attempt removing a directory that contains a read-only file,\r\n"
 684 "    which results in a failure:\r\n"
 685 "    fs0:\> attrib +r Test\Temp1\readme.txt\r\n"
 686 "    A R fs0:\Test\Temp1\readme.txt\r\n"
 687 "    fs0:\> rm Test\Temp1\r\n"
 688 ".SH RETURNVALUES\r\n"
 689 " \r\n"
 690 "RETURN VALUES:\r\n"
 691 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 692 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 693 "                            violation.\r\n"
 694 "  SHELL_NOT_FOUND           The source file was not able to be found.\r\n"
 695 "  SHELL_WRITE_PROTECTED     The target was write protected.\r\n"
 696
 697 #string STR_GET_HELP_SET          #language en-US ""
 698 ".TH set 0 "Displays or modifies UEFI Shell environment variables."\r\n"
 699 ".SH NAME\r\n"
 700 "Displays or modifies UEFI Shell environment variables.\r\n"
 701 ".SH SYNOPSIS\r\n"
 702 " \r\n"
 703 "SET [-v] [sname [value]]\r\n"
 704 "SET [-d <sname>]\r\n"
 705 ".SH OPTIONS\r\n"
 706 " \r\n"
 707 "  -d    - Deletes the environment variable.\r\n"
 708 "  -v    - Displays or modifies a volatile variable.\r\n"
 709 "  sname - Specifies an environment variable name.\r\n"
 710 "  value - Specifies an environment variable value.\r\n"
 711 ".SH DESCRIPTION\r\n"
 712 " \r\n"
 713 "NOTES:\r\n"
 714 "  1. This command is used to maintain the UEFI Shell environment variables.\r\n"
 715 "     This command can do the following:\r\n"
 716 "       - Display environment variables.\r\n"
 717 "       - Create new environment variables.\r\n"
 718 "       - Change the value of existing environment variables.\r\n"
 719 "       - Delete environment variables.\r\n"
 720 "  2. This command sets an environment variable to a specified \r\n"
 721 "     value. You can use it to create a new environment\r\n"
 722 "     variable or to modify an existing environment variable.\r\n"
 723 "  3. If used without any parameters, all the environment variables\r\n"
 724 "     are displayed.\r\n"
 725 "  4. If used with the -d option, the environment variable that\r\n"
 726 "     is specified by sname is deleted.\r\n"
 727 ".SH EXAMPLES\r\n"
 728 " \r\n"
 729 "EXAMPLES:\r\n"
 730 "  * To add an environment variable:\r\n"
 731 "    Shell> set DiagnosticPath fs0:\efi\diag;fs1:\efi\diag\r\n"
 732 " \r\n"
 733 "  * To display environment variables:\r\n"
 734 "    Shell> set\r\n"
 735 " \r\n"
 736 "  * To delete an environment variable:\r\n"
 737 "    Shell> set -d diagnosticpath\r\n"
 738 " \r\n"
 739 "  * To change an environment variable:\r\n"
 740 "    fs0:\> set src efi\r\n"
 741 "    fs0:\> set src efi1.1\r\n"
 742 " \r\n"
 743 "  * To append an environment variable:\r\n"
 744 "    Shell> set path %path%;fs0:\efi\Tools;fs0:\efi\boot;fs0:\\r\n"
 745 " \r\n"
 746 "  * To set a volatile variable that will disappear at the next boot:\r\n"
 747 "    Shell> set -v EFI_SOURCE c:\project\EFI1.1\r\n"
 748 ".SH RETURNVALUES\r\n"
 749 " \r\n"
 750 "RETURN VALUES:\r\n"
 751 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 752 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 753 "                            violation.\r\n"
 754 "  SHELL_OUT_OF_RESOURCES    A request to set a variable in a non-volatile \r\n"
 755 "                            fashion could not be completed. The resulting \r\n"
 756 "                            non-volatile request has been converted into a \r\n"
 757 "                            volatile request.\r\n"
 758
 759 #string STR_GET_HELP_DATE         #language en-US ""
 760 ".TH date 0 "Displays and sets the current date for the system."\r\n"
 761 ".SH NAME\r\n"
 762 "Displays and sets the current date for the system.\r\n"
 763 ".SH SYNOPSIS\r\n"
 764 " \r\n"
 765 "DATE [mm/dd/[yy]yy][-sfo]\r\n"
 766 ".SH OPTIONS\r\n"
 767 " \r\n"
 768 "  -sfo    - Displays information in Standard-Format Output.\r\n"
 769 "  mm      - Specifies the month of the date to be set. (1-12)\r\n"
 770 "  dd      - Specifies the day of the date to be set (1-31)\r\n"
 771 "  yy/yyyy - Specifies the year of the date to be set. If only two digits,\r\n"
 772 "            then enter 9x = 199x. Otherwise enter 20xx.\r\n"
 773 ".SH DESCRIPTION\r\n"
 774 " \r\n"
 775 "NOTES:\r\n"
 776 "  1. This command displays and/or sets the current date for the system.\r\n"
 777 "     If no parameters are used, it shows the current date. If a valid month,\r\n"
 778 "     day, and year are specified, the system's date is updated.\r\n"
 779 "     The following rules apply:\r\n"
 780 "       - Except for numeric characters and /, all other characters in the\r\n"
 781 "         argument are invalid.\r\n"
 782 "       - The Shell reports an error if the number is in the wrong\r\n"
 783 "         month/date/year range.\r\n"
 784 "       - A space before or after the numeric character is not allowed. Inserting\r\n"
 785 "         a space into the number is invalid.\r\n"
 786 "       - Repeated zeros are allowed before the number. For example:\r\n"
 787 "           Shell > date 0000008/000004/000097\r\n"
 788 "           Shell > date\r\n"
 789 "           08/04/2097\r\n"
 790 "           Shell >\r\n"
 791 "       - The year range must be greater than or equal to 1998.\r\n"
 792 "       - Two numeric characters indicate the year. Numbers below 98 are\r\n"
 793 "         regarded as 20xx, and numbers equal to or above 98 are regarded as\r\n"
 794 "         19xx. 00 means 2000. For example:\r\n"
 795 "           Shell > date 8/4/97\r\n"
 796 "           Shell > date\r\n"
 797 "           08/04/2097\r\n"
 798 "           Shell >\r\n"
 799 "           Shell > date 8/4/98\r\n"
 800 "           Shell > date\r\n"
 801 "           08/04/1998\r\n"
 802 "           Shell >\r\n"
 803 "  2. The range of valid years is from 1998-2099.\r\n"
 804 ".SH EXAMPLES\r\n"
 805 " \r\n"
 806 "EXAMPLES:\r\n"
 807 "  * To display the current date in the system:\r\n"
 808 "    fs0:\> date\r\n"
 809 " \r\n"
 810 "  * To set the date with long year format:\r\n"
 811 "    fs0:\> date 01/01/2050\r\n"
 812 " \r\n"
 813 "  * To set the date with short year format:\r\n"
 814 "    fs0:\> date 06/18/01\r\n"
 815 ".SH RETURNVALUES\r\n"
 816 " \r\n"
 817 "RETURN VALUES:\r\n"
 818 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 819 "  SHELL_DEVICE_ERROR        There was a hardware error preventing the\r\n"
 820 "                            completion of this command.\r\n"
 821 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 822 "                            violation.\r\n"
 823 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
 824 "                            formatted or its value was out of bounds.\r\n"
 825
 826 #string STR_GET_HELP_TIME         #language en-US ""
 827 ".TH time 0 "Displays or sets the time for the system."\r\n"
 828 ".SH NAME\r\n"
 829 "Displays or sets the current time for the system.\r\n"
 830 ".SH SYNOPSIS\r\n"
 831 " \r\n"
 832 "TIME [hh:mm[:ss]] [-tz tz] [-d dl]\r\n"
 833 ".SH OPTIONS\r\n"
 834 " \r\n"
 835 "  -d  - Sets or displays a daylight savings time value.\r\n"
 836 "  -tz - Specifies a time zone adjustment, measured in minutes offset from UTC. Valid values\r\n"
 837 "        are between -1440 and 1440 or 2047. If not present or set to 2047,\r\n"
 838 "        time is interpreted as local time.\r\n"
 839 "  hh  - Specifies a new hour (0-23) (required).\r\n"
 840 "  mm  - Specifies a new minute (0-59) (required).\r\n"
 841 "  ss  - Specifies a new second (0-59). If not specified, zero is used.\r\n"
 842 "  dl  - Specifies a daylight saving time value to set.\r\n"
 843 "          0 : Time is not affected.\r\n"
 844 "          1 : Time is affected, and has not been adjusted for daylight\r\n"
 845 "              savings.\r\n"
 846 "          3 : Time is affected, and has been adjusted for daylight savings.\r\n"
 847 "        All other values are invalid. If no value follows -d, the\r\n"
 848 "        current daylight savings time is displayed.\r\n"
 849 ".SH DESCRIPTION\r\n"
 850 " \r\n"
 851 "NOTES:\r\n"
 852 "  1. This command displays or sets the current time for the system.\r\n"
 853 "     If no parameters are used, it shows the current time. If valid hours, \r\n"
 854 "     minutes, and seconds are provided, the system time is\r\n"
 855 "     updated. Note the following rules:\r\n"
 856 "       - Except for numeric characters and the : character, all other\r\n"
 857 "         characters in the argument are invalid.\r\n"
 858 "       - The Shell reports an error if the number is in the wrong \r\n"
 859 "         hour/minute/second range.\r\n"
 860 "       - Spaces before or after the numeric character and spaces inserted into\r\n"
 861 "         the number are not allowed.\r\n"
 862 "       - Repeated zeros are allowed before the number. For example:\r\n"
 863 "           Shell> time 00000017:000004:0000\r\n"
 864 "           Shell> time\r\n"
 865 "           17:04:00 (UTC+08:00)\r\n"
 866 "  2. The seconds parameter is optional. If none is specified, it is\r\n"
 867 "     set to zero.\r\n"
 868 ".SH EXAMPLES\r\n"
 869 " \r\n"
 870 "EXAMPLES:\r\n"
 871 "  * To display current system time:\r\n"
 872 "    fs0:\> time\r\n"
 873 " \r\n"
 874 "  * To set the system time:\r\n"
 875 "    fs0:\> time 9:51:30\r\n"
 876 " \r\n"
 877 "  * To display the system time, including daylight savings time:\r\n"
 878 "    fs0:\> time -d\r\n"
 879 ".SH RETURNVALUES\r\n"
 880 " \r\n"
 881 "RETURN VALUES:\r\n"
 882 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 883 "  SHELL_DEVICE_ERROR        There was a hardware error preventing the\r\n"
 884 "                            completion of this command\r\n"
 885 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 886 "                            violation.\r\n"
 887 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
 888 "                            formatted or its value was out of bounds.\r\n"
 889
 890 #string STR_GET_HELP_TIMEZONE     #language en-US ""
 891 ".TH timezone 0 "Displays or sets time zone information."\r\n"
 892 ".SH NAME\r\n"
 893 "Displays or sets time zone information.\r\n"
 894 ".SH SYNOPSIS\r\n"
 895 " \r\n"
 896 "TIMEZONE [-s hh:mm | -l] [-b] [-f]\r\n"
 897 ".SH OPTIONS\r\n"
 898 " \r\n"
 899 "  -s - Sets the time zone associated with hh:mm offset from UTC.\r\n"
 900 "  -l - Displays a list of all time zones.\r\n"
 901 "  -b - Displays one screen at a time.\r\n"
 902 "  -f - Displays full information for the specified time zone.\r\n"
 903 ".SH DESCRIPTION\r\n"
 904 " \r\n"
 905 "NOTES:\r\n"
 906 "  1. This command displays and sets the current time zone for the system.\r\n"
 907 "  2. If no parameters are used, it shows the current time zone.\r\n"
 908 "  3. If a valid hh:mm parameter is provided, the time zone\r\n"
 909 "     information is updated.\r\n"
 910 ".SH EXAMPLES\r\n"
 911 " \r\n"
 912 "EXAMPLES:\r\n"
 913 "  * To display all available time zones:\r\n"
 914 "    Shell> timezone -l\r\n"
 915 " \r\n"
 916 "  * To set the time zone:\r\n"
 917 "    Shell> timezone -s -7:00\r\n"
 918 " \r\n"
 919 "  * To display detailed information for the current time zone:\r\n"
 920 "    Shell> timezone -f\r\n"
 921
 922 #string STR_GET_HELP_LS           #language en-US ""
 923 ".TH ls 0 "Lists the contents of a directory or file information."\r\n"
 924 ".SH NAME\r\n"
 925 "Lists the contents of a directory or file information.\r\n"
 926 ".SH SYNOPSIS\r\n"
 927 " \r\n"
 928 "LS [-r] [-a[attrib]][-sfo][file]\r\n"
 929 ".SH OPTIONS\r\n"
 930 " \r\n"
 931 "  -r     - Displays recursively (including subdirectories).\r\n"
 932 "  -a     - Displays files with a specified attribute. If \r\n"
 933 "           attribute is not specified, all files are listed. If -a is not\r\n"
 934 "           specified, all non-system and non-hidden files are listed.\r\n"
 935 "  -sfo   - Displays information in Standard-Format Output.\r\n"
 936 "  attrib - Specifies a file attribute list value:\r\n"
 937 "             a - Archive\r\n"
 938 "             s - System\r\n"
 939 "             h - Hidden\r\n"
 940 "             r - Read-only\r\n"
 941 "             d - Directory\r\n"
 942 "  file   - Specifies a name of a file or directory (wildcards are permitted).\r\n"
 943 ".SH DESCRIPTION\r\n"
 944 " \r\n"
 945 "NOTES:\r\n"
 946 "  1. This command lists directory contents or file information. If no file\r\n"
 947 "     name or directory name is specified, the current working directory\r\n"
 948 "     is assumed.\r\n"
 949 "  2. The contents of a directory are listed if all of the following are true:\r\n"
 950 "       - If option -r is not specified.\r\n"
 951 "       - If no wildcard characters are specified in the file parameter.\r\n"
 952 "       - If the file specified represents an existing directory.\r\n"
 953 "  3. In all other cases, the command functions as follows:\r\n"
 954 "       - All files/directories that match the specified name are displayed.\r\n"
 955 "       - The -r flag determines whether a recursive search is performed.\r\n"
 956 "       - The option flag -a[attrib] only displays those\r\n"
 957 "         files with the attributes that are specified.\r\n"
 958 "       - If more than one attribute is specified, only the files that have all\r\n"
 959 "         those attributes are listed.\r\n"
 960 "       - If -a is followed by nothing, then all files/directories are\r\n"
 961 "         displayed, regardless of their attributes.\r\n"
 962 "       - If -a itself is not specified, then all files except system and\r\n"
 963 "         hidden files are displayed.\r\n"
 964 ".SH EXAMPLES\r\n"
 965 " \r\n"
 966 "EXAMPLES:\r\n"
 967 "  * To hide files by adding the hidden or system attribute to them:\r\n"
 968 "    fs0:\> attrib +s +h *.efi\r\n"
 969 " \r\n"
 970 "  * To display all, except the files/directories with 'h' or 's' attribute:\r\n"
 971 "    fs0:\> ls\r\n"
 972 " \r\n"
 973 "  * To display files with all attributes in the current directory:\r\n"
 974 "    fs0:\> ls -a\r\n"
 975 " \r\n"
 976 "  * To display files with read-only attributes in the current directory:\r\n"
 977 "    fs0:\> ls -ar\r\n"
 978 " \r\n"
 979 "  * To display the files with attribute of 's':\r\n"
 980 "    fs0:\> ls -as isabus.efi\r\n"
 981 " \r\n"
 982 "  * To display all in fs0:\efi directory recursively:\r\n"
 983 "    fs0:\> ls -r -a efi\r\n"
 984 " \r\n"
 985 "  * To display files with a specified type in the current directory: \r\n"
 986 "    recursively:\r\n"
 987 "    fs0:\> ls -r -a *.efi -b\r\n"
 988 ".SH RETURNVALUES\r\n"
 989 " \r\n"
 990 "RETURN VALUES:\r\n"
 991 "  SHELL_SUCCESS             The action was completed as requested.\r\n"
 992 "  SHELL_INVALID_PARAMETER   One of the passed-in parameters was incorrectly\r\n"
 993 "                            formatted or its value was out of bounds.\r\n"
 994 "  SHELL_SECURITY_VIOLATION  This function was not performed due to a security\r\n"
 995 "                            violation.\r\n"
 996 "  SHELL_NOT_FOUND           The requested file or directory was not found.\r\n"
 997
 998 #string STR_GET_HELP_LOAD         #language en-US ""
 999 ".TH load 0 "Loads a UEFI driver into memory."\r\n"
1000 ".SH NAME\r\n"
1001 "Loads a UEFI driver into memory.\r\n"
1002 ".SH SYNOPSIS\r\n"
1003 " \r\n"
1004 "LOAD [-nc] file [file...]\r\n"
1005 ".SH OPTIONS\r\n"
1006 " \r\n"
1007 "  -nc  - Loads the driver, but does not connect the driver.\r\n"
1008 "  File - Specifies a file that contains the image of the UEFI driver (wildcards are\r\n"
1009 "         permitted).\r\n"
1010 ".SH DESCRIPTION\r\n"
1011 " \r\n"
1012 "NOTES:\r\n"
1013 "  1. This command loads a driver into memory. It can load multiple files at\r\n"
1014 "     one time. The file name supports wildcards.\r\n"
1015 "  2. If the -nc flag is not specified, this command attempts to connect the\r\n"
1016 "     driver to a proper device. It might also cause previously loaded drivers\r\n"
1017 "     to be connected to their corresponding devices.\r\n"
1018 "  3. Use the 'UNLOAD' command to unload a driver.\r\n"
1019 ".SH EXAMPLES\r\n"
1020 " \r\n"
1021 "EXAMPLES:\r\n"
1022 "  * To load a driver:\r\n"
1023 "    fs0:\> load Isabus.efi\r\n"
1024 " \r\n"
1025 "  * To load multiple drivers:\r\n"
1026 "    fs0:\> load Isabus.efi IsaSerial.efi\r\n"
1027 " \r\n"
1028 "  * To load multiple drivers using file name wildcards:\r\n"
1029 "    fs0:\> load Isa*.efi\r\n"
1030 " \r\n"
1031 "  * To load a driver without connecting it to a device:\r\n"
1032 "    fs0:\> load -nc IsaBus.efi\r\n"
1033 ".SH RETURNVALUES\r\n"
1034 " \r\n"
1035 "RETURN VALUES:\r\n"
1036 "  SHELL_SUCCESS              The action was completed as requested.\r\n"
1037 "  SHELL_INVALID_PARAMETER    One of the passed-in parameters was incorrectly\r\n"
1038 "                             formatted or its value was out of bounds.\r\n"
1039 "  SHELL_SECURITY_VIOLATION   This function was not performed due to a security\r\n"
1040 "                             violation.\r\n"
1041 "  SHELL_NOT_FOUND            The requested file was not found.\r\n"
1042
1043 #string STR_GET_HELP_VOL         #language en-US ""
1044 ".TH vol 0 "Displays or modifies information about a disk volume."\r\n"
1045 ".SH NAME\r\n"
1046 "Displays or modifies information about a disk volume.\r\n"
1047 ".SH SYNOPSIS\r\n"
1048 " \r\n"
1049 "VOL [fs] [-n <VolumeLabel>]\r\n"
1050 "VOL [fs] [-d]\r\n"
1051 ".SH OPTIONS\r\n"
1052 " \r\n"
1053 "  -n          - Displays or modifies a new volume label.\r\n"
1054 "  -d          - Displays or modifies an empty volume label.\r\n"
1055 "  fs          - Specifies the name of the file system.\r\n"
1056 "  VolumeLabel - Specifies a volume label.\r\n"
1057 ".SH DESCRIPTION\r\n"
1058 " \r\n"
1059 "NOTES:\r\n"
1060 "  1. The following characters cannot be used in a volume label:\r\n"
1061 "     % ^ * + = [ ] | : ; \" < > ? / . \r\n"
1062 "  2. No spaces are allowed in a volume label.\r\n"
1063 "  3. This command displays the volume information for the specified file\r\n"
1064 "     system. If fs is not specified, the current file system is used.\r\n"
1065 "  4. If -n is specified, the volume label for fs is set to\r\n"
1066 "     VolumeLabel.\r\n"
1067 "  5. The maximum length for volume label is 11 characters.\r\n"
1068 ".SH EXAMPLES\r\n"
1069 " \r\n"
1070 "EXAMPLES:\r\n"
1071 "  * To display the volume of the current file system:\r\n"
1072 "    fs0:\> vol\r\n"
1073 " \r\n"
1074 "  * To change the label of fs0:\r\n"
1075 "    Shell> vol fs0 -n help_test\r\n"
1076 " \r\n"
1077 "  * To delete the volume label of fs0:\r\n"
1078 "    fs0:\> vol fs0 -d\r\n"
1079 ".SH RETURNVALUES\r\n"
1080 " \r\n"
1081 "RETURN VALUES:\r\n"
1082 "  SHELL_SUCCESS              The action was completed as requested.\r\n"
1083 "  SHELL_INVALID_PARAMETER    One of the passed-in parameters was incorrectly\r\n"
1084 "                             formatted or its value was out of bounds.\r\n"
1085 "  SHELL_SECURITY_VIOLATION   This function was not performed due to a security\r\n"
1086 "                             violation.\r\n"
1087 "  SHELL_NOT_FOUND            The target file-system was not found.\r\n"
1088