UnixPkg/UnixPkg.fdf

   1 # This is Unix FDF file with UEFI HII features enabled
   2 #
   3 # Copyright (c) 2008, Intel Corporation
   4 #
   5 #  All rights reserved. This program and the accompanying materials
   6 #    are licensed and made available under the terms and conditions of the BSD License
   7 #    which accompanies this distribution. The full text of the license may be found at
   8 #    http://opensource.org/licenses/bsd-license.php
   9 #
  10 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27 [FD.Fv_Recovery]
  28 BaseAddress   = 0x0|gEfiUnixPkgTokenSpaceGuid.PcdUnixFdBaseAddress  #The base address of the FLASH Device.
  29 Size          = 0x002a0000                                           #The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31 BlockSize     = 0x10000
  32 NumBlocks     = 0x2a
  33
  34 ################################################################################
  35 #
  36 # Following are lists of FD Region layout which correspond to the locations of different
  37 # images within the flash device.
  38 #
  39 # Regions must be defined in ascending order and may not overlap.
  40 #
  41 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  42 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  43 # "0x" characters. Like:
  44 # Offset|Size
  45 # PcdOffsetCName|PcdSizeCName
  46 # RegionType <FV, DATA, or FILE>
  47 #
  48 ################################################################################
  49 0x00000000|0x00280000
  50 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize
  51 FV = FvRecovery
  52
  53 0x00280000|0x0000c000
  54 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
  55 #NV_VARIABLE_STORE
  56 DATA = {
  57   ## This is the EFI_FIRMWARE_VOLUME_HEADER
  58   # ZeroVector []
  59   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  60   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  61   # FileSystemGuid: gEfiSystemNvDataFvGuid         =
  62   #  { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
  63   0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
  64   0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
  65   # FvLength: 0x20000
  66   0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
  67   # Signature "_FVH"       #Attributes
  68   0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
  69   # HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision
  70   0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02,
  71   # Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block
  72   0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
  73   # Blockmap[1]: End
  74   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  75   ## This is the VARIABLE_STORE_HEADER
  76   #Signature: "$VSS"      #Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (HeaderLength) = 0xBFB8
  77                           # This can speed up the Variable Dispatch a bit.
  78   0x24, 0x56, 0x53, 0x53, 0xB8, 0xBF, 0x00, 0x00,
  79   #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
  80   0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
  81 }
  82
  83 0x0028c000|0x00002000
  84 #NV_EVENT_LOG
  85 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageEventLogSize
  86
  87 0x0028e000|0x00002000
  88 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
  89 #NV_FTW_WORKING
  90 DATA = {
  91   # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEfiSystemNvDataFvGuid         =
  92   #  { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
  93   0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
  94   0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
  95   # Crc:UINT32            #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
  96   0x85, 0xae, 0x2d, 0xbf, 0xFE, 0xFF, 0xFF, 0xFF,
  97   # WriteQueueSize: UINT32
  98   0xE4, 0x1F, 0x00, 0x00
  99 }
 100
 101 0x00290000|0x00010000
 102 #NV_FTW_SPARE
 103 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
 104
 105 ################################################################################
 106 #
 107 # FV Section
 108 #
 109 # [FV] section is used to define what components or modules are placed within a flash
 110 # device file.  This section also defines order the components and modules are positioned
 111 # within the image.  The [FV] section consists of define statements, set statements and
 112 # module statements.
 113 #
 114 ################################################################################
 115 [FV.FvRecovery]
 116 FvAlignment        = 16         #FV alignment and FV attributes setting.
 117 ERASE_POLARITY     = 1
 118 MEMORY_MAPPED      = TRUE
 119 STICKY_WRITE       = TRUE
 120 LOCK_CAP           = TRUE
 121 LOCK_STATUS        = TRUE
 122 WRITE_DISABLED_CAP = TRUE
 123 WRITE_ENABLED_CAP  = TRUE
 124 WRITE_STATUS       = TRUE
 125 WRITE_LOCK_CAP     = TRUE
 126 WRITE_LOCK_STATUS  = TRUE
 127 READ_DISABLED_CAP  = TRUE
 128 READ_ENABLED_CAP   = TRUE
 129 READ_STATUS        = TRUE
 130 READ_LOCK_CAP      = TRUE
 131 READ_LOCK_STATUS   = TRUE
 132
 133 ################################################################################
 134 #
 135 # The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
 136 # Parsing tools will scan the INF file to determine the type of component or module.
 137 # The component or module type is used to reference the standard rules
 138 # defined elsewhere in the FDF file.
 139 #
 140 # The format for INF statements is:
 141 # INF $(PathAndInfFileName)
 142 #
 143 ################################################################################
 144 ##
 145 #  PEI Phase modules
 146 ##
 147 ##
 148 #  PEI Apriori file example, more PEIM module added later.
 149 ##
 150 APRIORI PEI {
 151   INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 152   INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf
 153   }
 154 APRIORI DXE {
 155   INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 156   INF  IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf
 157   INF  UnixPkg/MetronomeDxe/Metronome.inf
 158   }
 159 INF  MdeModulePkg/Core/Pei/PeiMain.inf
 160 INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 161 INF  IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf
 162 INF  UnixPkg/BootModePei/BootModePei.inf
 163 INF  UnixPkg/UnixFlashMapPei/FlashMap.inf
 164 INF  MdeModulePkg/Universal/MemoryTest/BaseMemoryTestPei/BaseMemoryTestPei.inf
 165 INF  UnixPkg/UnixAutoScanPei/UnixAutoScan.inf
 166 INF  UnixPkg/UnixFirmwareVolumePei/UnixFwh.inf
 167 INF  MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 168 INF  UnixPkg/UnixThunkPpiToProtocolPei/UnixThunkPpiToProtocol.inf
 169 INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 170
 171 ##
 172 #  DXE Phase modules
 173 ##
 174 INF  MdeModulePkg/Core/Dxe/DxeMain.inf
 175 INF  IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf
 176 INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 177 INF  UnixPkg/MetronomeDxe/Metronome.inf
 178 INF  UnixPkg/RealTimeClockRuntimeDxe/RealTimeClock.inf
 179 INF  UnixPkg/ResetRuntimeDxe/Reset.inf
 180 INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 181 INF  UnixPkg/FvbServicesRuntimeDxe/UnixFwh.inf
 182 INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 183 INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
 184 INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
 185 INF  MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
 186 INF  UnixPkg/UnixThunkDxe/UnixThunk.inf
 187 INF  UnixPkg/CpuRuntimeDxe/Cpu.inf
 188 INF  MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteDxe/FtwLite.inf
 189 INF  IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf
 190 INF  UnixPkg/MiscSubClassPlatformDxe/MiscSubClassDriver.inf
 191 INF  UnixPkg/TimerDxe/Timer.inf
 192 INF  MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 193 INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 194 INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 195 INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 196 INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 197 INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 198 INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 199 INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 200 INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 201 INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 202 INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 203 INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 204 INF  IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
 205 INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
 206 INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
 207 INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
 208 INF  UnixPkg/UnixBusDriverDxe/UnixBusDriver.inf
 209
 210 INF  UnixPkg/UnixBlockIoDxe/UnixBlockIo.inf
 211 INF  UnixPkg/UnixSerialIoDxe/UnixSerialIo.inf
 212 INF  UnixPkg/UnixUgaDxe/UnixUga.inf
 213 #INF  UnixPkg/UnixConsoleDxe/UnixConsole.inf
 214 INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 215 INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 216 INF  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
 217 INF  UnixPkg/UnixSimpleFileSystemDxe/UnixSimpleFileSystem.inf
 218 INF  MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
 219 INF  MdeModulePkg/Application/HelloWorld/HelloWorld.inf
 220
 221 #
 222 # Network stack drivers
 223 # To test network drivers, need network Io driver(SnpNt32Io.dll), please refer to NETWORK-IO Subproject.
 224 #
 225 #INF  MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 226 #INF  MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 227 #INF  MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 228 #INF  MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
 229 #INF  MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 230 #INF  MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 231 #INF  MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 232 #INF  MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 233 #INF  MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 234 #INF  UnixPkg/SnpUnixDxe/SnpUnixDxe.inf
 235
 236
 237
 238 ################################################################################
 239 #
 240 # FILE statements are provided so that a platform integrator can include
 241 # complete EFI FFS files, as well as a method for constructing FFS files
 242 # using curly "{}" brace scoping. The following three FILEs are
 243 # for binary shell, binary fat and logo module.
 244 #
 245 ################################################################################
 246 FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {
 247     SECTION COMPRESS PI_STD {
 248       SECTION GUIDED {
 249         SECTION PE32 = EdkShellBinPkg/FullShell/Ia32/Shell_Full.efi
 250       }
 251     }
 252   }
 253 FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {
 254     SECTION COMPRESS PI_STD {
 255       SECTION GUIDED {
 256         SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi
 257       }
 258     }
 259   }
 260 FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {
 261     SECTION COMPRESS PI_STD {
 262       SECTION GUIDED {
 263         SECTION RAW = MdeModulePkg/Logo/Logo.bmp
 264       }
 265     }
 266   }
 267
 268
 269 ################################################################################
 270 #
 271 # Rules are use with the [FV] section's module INF type to define
 272 # how an FFS file is created for a given INF file. The following Rule are the default
 273 # rules for the different module type. User can add the customized rules to define the
 274 # content of the FFS file.
 275 #
 276 ################################################################################
 277
 278
 279 ############################################################################
 280 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 281 ############################################################################
 282 #
 283 #[Rule.Common.DXE_DRIVER]
 284 #  FILE DRIVER = $(NAMED_GUID) {
 285 #    DXE_DEPEX    DXE_DEPEX Optional      |.depex
 286 #    COMPRESS PI_STD {
 287 #      GUIDED {
 288 #        PE32     PE32                    |.efi
 289 #        UI       STRING="$(MODULE_NAME)" Optional
 290 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 291 #      }
 292 #    }
 293 #  }
 294 #
 295 ############################################################################
 296
 297 [Rule.Common.PEI_CORE]
 298   FILE PEI_CORE = $(NAMED_GUID) {
 299     PE32     PE32           |.efi
 300     UI       STRING ="$(MODULE_NAME)" Optional
 301     VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 302   }
 303
 304 [Rule.Common.PEIM]
 305   FILE PEIM = $(NAMED_GUID) {
 306      PEI_DEPEX PEI_DEPEX Optional        |.depex
 307      PE32      PE32                      |.efi
 308      UI       STRING="$(MODULE_NAME)" Optional
 309      VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 310   }
 311
 312 [Rule.Common.PEIM.TIANOCOMPRESSED]
 313   FILE PEIM = $(NAMED_GUID) {
 314     PEI_DEPEX PEI_DEPEX Optional         |.depex
 315     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 316       PE32      PE32                     |.efi
 317       UI        STRING="$(MODULE_NAME)" Optional
 318       VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 319     }
 320   }
 321
 322 [Rule.Common.DXE_CORE]
 323   FILE DXE_CORE = $(NAMED_GUID) {
 324     COMPRESS PI_STD {
 325       PE32     PE32           |.efi
 326       UI       STRING="$(MODULE_NAME)" Optional
 327       VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 328     }
 329   }
 330
 331 [Rule.Common.UEFI_DRIVER]
 332   FILE DRIVER = $(NAMED_GUID) {
 333     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 334     COMPRESS PI_STD {
 335       GUIDED {
 336         PE32     PE32                    |.efi
 337         UI       STRING="$(MODULE_NAME)" Optional
 338         VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 339       }
 340     }
 341   }
 342
 343 [Rule.Common.DXE_DRIVER]
 344   FILE DRIVER = $(NAMED_GUID) {
 345     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 346     COMPRESS PI_STD {
 347       GUIDED {
 348         PE32     PE32                    |.efi
 349         UI       STRING="$(MODULE_NAME)" Optional
 350         VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 351       }
 352     }
 353   }
 354
 355 [Rule.Common.DXE_RUNTIME_DRIVER]
 356   FILE DRIVER = $(NAMED_GUID) {
 357     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 358     COMPRESS PI_STD {
 359       GUIDED {
 360         PE32     PE32                    |.efi
 361         UI       STRING="$(MODULE_NAME)" Optional
 362         VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 363       }
 364     }
 365   }
 366
 367 [Rule.Common.UEFI_APPLICATION]
 368   FILE APPLICATION = $(NAMED_GUID) {
 369     COMPRESS PI_STD {
 370       GUIDED {
 371         PE32     PE32                    |.efi
 372         UI       STRING="$(MODULE_NAME)" Optional
 373         VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 374       }
 375     }
 376   }